Workbench Execution with Parallel Group Type

I created a replication job in Workbench 4.1 to migrate 16 tables - ODBC sources (for AS400) and Microsoft SQL Server targets within a single replication group. I can select Type to either Parallel or Sequential for the replication group:
I set Type to Parallel and when executing, I observe that 8 of the 16 tables begin processing and as each completes another of the remaining begins so there are always 8 tables being processed until there are no longer tables to process.
If I test with two separate replication jobs each with 8 of the 16 tables with Parallel set and execute at the same time, both jobs load 8 tables in parallel so that 16 are being loaded at once.
I would like to understand how the number of source/target replications running in parallel within a Workbench replication job is determined and/or set (in my case, 8). Is that within the tool at all or is it strictly from the database?

Hi Robert,
I hope that depends on the Job server's no. of engine processes.
To see the no. of engine process assigned to your Job server,
Go to 'Tools' Menu---> 'Options'--> Expand 'Job Sever'--> 'Environment', as shown in the attached pic.
Hope this helps you.
Regards,
Abhi

Similar Messages

OIM 11g R1. Issue with parallel participant type approval workflow.

Hi All,
I have a request level approval with the human task assignment participant type set to parallel. There will be two participants in the workflow with approve and reject having outcome value as 50 each. When i submit a request, i can see the both the request is properly allocated to both the users. But when i log in with the individual users and search the approval tasks in the self service page, i cant see it properly assigned.
In the approval tasks table, i cant see the values for the following columns request ID, request type, beneficiary, request target. Whereas i can see the value for the requester as "Anonymour user" and it is assigned to a proper user. When i try to approve, i get the following error in the console.
========================================================================================================================
<25 Nov, 2012 1:49:09 PM IST> <Warning> <oracle.adfinternal.view.faces.renderkit
.rich.NavigationPaneRenderer> <BEA-000000> <ILLEGAL_COMPONENT_HIERARCHY : A chil
d component that is not a commandNavigationItem (or a separator when hint=choice
) was found.>
<25 Nov, 2012 2:22:57 PM IST> <Error> <oracle.iam.request.impl> <IAM-2050076> <N
o request found with the request ID .>
<25 Nov, 2012 2:22:57 PM IST> <Error> <oracle.iam.tasklist.agentry.task> <IAM-20
60009> <Error occurred while approving task from BPEL>
<25 Nov, 2012 2:22:57 PM IST> <Error> <oracle.iam.tasklist.agentry.task> <IAM-20
60013> <Exception thrown:
oracle.iam.request.exception.RequestServiceException: IAM-2050076:No request fou
nd with the request ID .
at oracle.iam.request.repository.RequestRepository.getRequestClone(Reque
stRepository.java:891)
at oracle.iam.request.impl.RequestEngine.getBasicRequestDetails(RequestE
ngine.java:3877)
at oracle.iam.request.impl.RequestServiceImpl.getBasicRequestData(Reques
tServiceImpl.java:94)
at oracle.iam.request.api.RequestServiceEJB.getBasicRequestDatax(Unknown
Source)
at sun.reflect.GeneratedMethodAccessor1000.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJo
inpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMetho
dInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMetho
dInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntrodu
ctionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntrodu
ctionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMetho
dInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisit
orImpl.visit(MethodInvocationVisitorImpl.java:37)
at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.c
allback(EnvironmentInterceptorCallbackImpl.java:54)
at com.bea.core.repackaged.springframework.jee.spi.EnvironmentIntercepto
r.invoke(EnvironmentInterceptor.java:50)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMetho
dInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocat
ionInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMetho
dInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntrodu
ctionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntrodu
ctionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMetho
dInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopPr
oxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy337.getBasicRequestDatax(Unknown Source)
at oracle.iam.request.api.RequestService_dnwrzl_RequestServiceRemoteImpl
.__WL_invoke(Unknown Source)
at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(Ses
sionRemoteMethodInvoker.java:40)
at oracle.iam.request.api.RequestService_dnwrzl_RequestServiceRemoteImpl
.getBasicRequestDatax(Unknown Source)
at sun.reflect.GeneratedMethodAccessor999.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(Remote
BusinessIntfProxy.java:85)
at $Proxy170.getBasicRequestDatax(Unknown Source)
at sun.reflect.GeneratedMethodAccessor998.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflecti
on(AopUtils.java:307)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynami
cAopProxy.java:198)
at $Proxy336.getBasicRequestDatax(Unknown Source)
at oracle.iam.request.api.RequestServiceDelegate.getBasicRequestData(Unk
nown Source)
at oracle.iam.tasklist.agentry.task.ApproveActor.perform(ApproveActor.ja
va:106)
at oracle.iam.consoles.faces.mvc.canonic.Model.perform(Model.java:565)
at oracle.iam.consoles.faces.mvc.self.Model.perform(Model.java:178)
at oracle.iam.consoles.faces.mvc.canonic.Model.prepare(Model.java:460)
at oracle.iam.consoles.faces.mvc.self.Model.prepare(Model.java:173)
at oracle.iam.consoles.faces.mvc.canonic.Controller.doPrepare(Controller
.java:225)
at oracle.iam.consoles.faces.mvc.canonic.Controller.doSelectOperationNav
igation(Controller.java:88)
at oracle.iam.consoles.faces.render.canonic.UIEntrypod$CommandToolbarBut
tonActionListener.processAction(UIEntrypod.java:677)
at javax.faces.event.ActionEvent.processListener(ActionEvent.java:88)
at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcast(UIXC
omponentBase.java:675)
at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand
.java:179)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.r
un(ContextSwitchingComponent.java:92)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._pr
ocessPhase(ContextSwitchingComponent.java:361)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.bro
adcast(ContextSwitchingComponent.java:96)
at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclu
de.java:102)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.r
un(ContextSwitchingComponent.java:92)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._pr
ocessPhase(ContextSwitchingComponent.java:361)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.bro
adcast(ContextSwitchingComponent.java:96)
at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclu
de.java:96)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents
(LifecycleImpl.java:902)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(L
ifecycleImpl.java:313)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(Lifecyc
leImpl.java:186)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run
(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecuri
tyHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.jav
a:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
va:56)
at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
va:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.j
ava:205)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
va:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter
(RegistrationFilter.java:106)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterL
istChain.doFilter(TrinidadFilterImpl.java:446)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter
.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterL
istChain.doFilter(TrinidadFilterImpl.java:446)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilt
erImpl(TrinidadFilterImpl.java:271)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilte
r(TrinidadFilterImpl.java:177)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFi
lter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
va:56)
at oracle.iam.platform.auth.web.PwdMgmtNavigationFilter.doFilter(PwdMgmt
NavigationFilter.java:121)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
va:56)
at oracle.iam.platform.auth.web.OIMAuthContextFilter.doFilter(OIMAuthCon
textFilter.java:107)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
va:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:1
75)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
va:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:31
3)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUt
il.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.jav
a:94)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:1
61)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
va:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:13
6)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
va:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsF
ilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
va:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio
n.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio
n.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
dSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppS
ervletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletC
ontext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.j
ava:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
>
========================================================================================================================
Please share any thoughts on this.
Thanks,
Srini

Hi Kevin,
Thanks a lot for the response. But, when i deployed the composite SAR in to the server from Jdeveloper, i checked the option to "Overwrite any existing composite with same revision ID". SO, i used the same revision ID (Say 1.0), will this also need to be disabled?
Thanks,
Srini

Query Cubes with Parallel executions?

I have the following problem:
As I mentioned in my first question here: Combined Cube of smaller cubes?
We joined four cube views to form a fact table for a bigger cube. Actually we don't form a bigger view based on the cube views' now, but use an etl to insert into a fact table the results by months. Let's say our cubes are DDS_CUBE, KD_CUBE, GFO_CUBE and ZL_CUBE.
We use DDS_CUBE as our main and do a left join on the others to insert rows in fact table for AOR_CUBE. There are around 238 000 rows per month in DDS_CUBE and DDS_CUBE have data for 12 months. The other cubes have average the same rows of data.
And when I ran the query with all the rows after 3 hours it's still running and I think it shouldn't be.
*When I limit the rows with rownum < 1000 it executes for under 5 minutes.
Is there a way to optimize this, can I query the cubes with parallel executions not from the views but from the table they are kept?
Edit: Forgot to mention that DDS_CUBE is partitioned by month and have a total of 84 partitions, but only 12 are loaded.
Message was edited by: valeksandrova
Also is there a way to import OLAP cubes from AWM to OWB?

Update:
I wrote a procedure with bulk collect. It turns out that the DDS_CUBE is causing problems. The query selects from it around 238k rows which are the total amount of rows in the cube for the selected month and then it just stops, it doesn't proceed the rest of the query to select from the other cubes.
Also, lets say my select statement is like this:
SELECT <cols> FROM DDS_CUBE
LEFT JOIN GFO_CUBE on <join>
LEFT JOIN KD_CUBE on <join>
LEFT JOIN ZL_CUBE on <join>
WHERE <condition that select only the members of the lowest dimension levels and for only one month>
And I'm wondering why does the execution plan does right join on the GFO, KD and ZL cubes and not a LEFT join based on the DDS_CUBE.
It goes selecting all(all months, all levels, everything) the rows of the other cubes (11M from ZL and 238k from DDS, and there it stops, doesn't proceed to KD or GFO cube). Why isn't just selecting first the needed 238k from DDS_CUBE and then filter only the needed ones from the other cubes?

Hunt group type Set up with outside ext numbers ie Cell phones

Using CUCM 9.1
Is there a quick and easy way to create a hunt group type set up using outside (cell phone numbers)?
The scenario will be one (person who will be ON Call) using an internal DID that is forwarded to to a cell phone of the oncall person that particular week. If no answer it would forward to the next line group of 4 members and also try their cell phones. After this it would simply repeat the entire process. So far it looks like a solution may be possible with single line reach perhaps?
Any insight would be grealy appreciated.
Dave

Hello,
I set up something like this on CUCM 8.0 a couple of years ago.
I used the Mobile Connect feature as you suggest and it worked ok after some playing about with the timers.
The main problem was that there was no way for the remote users to log out of the hunt group. They could disable Mobile Connect using the IVR but the calls would still ring on their deskphones - if you log out of the phones (i.e. Extension Mobility) before leaving the office this problem should not occur.
The other issue was how long calls took to connect especially if a couple of people in the group did not answer. We actually recorded a message asking callers to be patient that was played when the call was first received (we were using UCCX to do the IVR and call transfer).
Hope this is of use.

Load cache group with parallel error, 907

hello, chris:
we met another question, when we create a cache group, then load the data with parallel 8, it appeared unique conflict, we check the data but didn't found any data question, so we load the data again without parallel parameter, it works well, all the data load in. then use unload and load with parallel 8 again, it appeared unique confict again, what happend??
thank you...
The script ls:
create readonly cache group FSZW_OCECS.SP_SUBSCRIBER_RELATION_CACHE
autorefresh
mode incremental
interval 29000 milliseconds
/* state on */
from
FSZW_OCECS.SP_SUBSCRIBER_RELATION (
SUBS_RELATION_ID TT_BIGINT NOT NULL,
PRIVID VARCHAR2(32 BYTE) INLINE NOT NULL,
SUBSID TT_BIGINT,
SWITCH_FLAG VARCHAR2(2 BYTE) INLINE,
DISCOUNT_CODE VARCHAR2(8 BYTE) INLINE NOT NULL,
DISCOUNT_SERIAL TT_INTEGER,
START_DATE DATE NOT NULL,
END_DATE DATE,
MOBILENO VARCHAR2(15 BYTE) INLINE NOT NULL,
APPLY_DATE DATE,
primary key (SUBS_RELATION_ID))
where NODEID = '334' or NODEID IS NULL,
FSZW_OCECS.SP_SUBSCRIBER_ATTRINFO (
SUB_ATTACH_ID TT_BIGINT NOT NULL,
SUBS_RELATION_ID TT_BIGINT,
SUB_ATTACH_INFO VARCHAR2(16 BYTE) INLINE NOT NULL,
SUB_ATTACH_TYPE VARCHAR2(2 BYTE) INLINE,
primary key (SUB_ATTACH_ID),
foreign key (SUBS_RELATION_ID)
references FSZW_OCECS.SP_SUBSCRIBER_RELATION (SUBS_RELATION_ID));
Command> load cache group SP_SUBSCRIBER_RELATION_CACHE commit every 25600 rows PARALLEL 8;
5056: The cache operation fails: error_type=<TimesTen Error>, error_code=<907>, error_message: [TimesTen]TT0907: Unique constraint (SP_SUBSCRIBER_ATTRINFO) violated at Rowid <0x0000000091341e88>
5037: An error occurred while loading FSZW_OCECS.SP_SUBSCRIBER_RELATION_CACHE:Load failed ([TimesTen]TT0907: Unique constraint (SP_SUBSCRIBER_ATTRINFO) violated at Rowid <0x0000000091341e88>
Command> load cache group FSZW_OCECS.SP_SUBSCRIBER_RELATION_CACHE commit every 25600 rows;
5746074 cache instances affected.

This looks like a bug to me but I haven't been able to find a known candidate. Are you able to log an SR and provide a testcase so we can reproduce it here and verify if it is a new bug? Thanks.

Help with parallel arrays of different data types

Hello all, I am having an issue with parallel arrays. My program requires me to read information from a text file into 4 parallel arrays (2 String and 2 double). My text file needs to look something like this:
John Johnson
0000004738294961
502.67
1000.000
Jane Smith
0000005296847913
284.51
1000.000
...and so on
Where the first thing is the name (obviously), an account number, the balance in the account, and the credit limit. I just cant figure out how to read everything into the arrays. We havent learned anything too heavy, and this seems a little too advanced for my class, but I guess we will manage. Any help will be appreciated. Thanks guys.
Casey

Man this is a dumb homework assignment. The requirements scream out for a class along the lines of
public class Account{
private String name, number;
private double balance,creditlimit;
// more code here
}and then to use a List of Account objects.
Anyway what's your actual problem. There's nothing very hard about it. A loop. So....
You should consider posting (formatted) code showing what you have done and where exactly you are stuck.

Accounts being created with administrative group rights

Hello,
The server is a Windows 2003 R2 Enterprise fully patched used for Shared Hosting purposes. It runs Hsphere control panel. I am trying to identify how the following hack is happening.
1) There are users being created with Administrative group rights.   Below is the EventViewer log for the user creation:
User Account Created:
    New Account Name:    username
    New Domain:    PCNAME
    New Account ID:    PCNAME\username
    Caller User Name:    PCNAME$
    Caller Domain:    DOMAINNAME
    Caller Logon ID:   (0x0,0x3E7)
    Privileges       -
Attributes:
    Sam Account Name:    username
    Display Name:   <value not set>
    User Principal Name:   -
    Home Directory:   <value not set>
    Home Drive:   <value not set>
    Script Path:   <value not set>
    Profile Path:   <value not set>
    User Workstations:   <value not set>
    Password Last Set:   <never>
    Account Expires:   <never>
    Primary Group ID:   513
    AllowedToDelegateTo:   -
    Old UAC Value:   0x2DAB2B0
    New UAC Value:   0x2DAB2B0
    User Account Control:   -
    User Parameters:   <value not set>
    Sid History:   -
    Logon Hours:   <value changed, but not displayed>
There exists entries as well where the primary group ID is changed to the Administrative group, but I am omitting such.
2) I tried to identify what Caller Logon ID:   (0x0,0x3E7) means. I found out from here:
http://blog.joeware.net/2013/01/14/2667/ that I can use LogonSessions.exe to identify it.
Output from LogonSessions.exe is pasted below (snippet):
[0] Logon session 00000000:000003e7:
    User name:    DOMAINNAME\PCNAME$
    Auth package: NTLM
    Logon type:   (none)
    Session:      0
    Sid:          S-1-5-18
    Logon time:   9/11/2014 12:41:53 PM
    Logon server:
    DNS Domain:
    UPN:
        4: System
      316: smss.exe
      364: csrss.exe
      392: winlogon.exe
      440: services.exe
      452: lsass.exe
      628: svchost.exe
      756: LMAgent.exe
      840: svchost.exe
     1000: spoolsv.exe
     1252: avagent.exe
     1268: camWMIAgent.exe
     1324: cissesrv.exe
     1380: cpqrcmc.exe
     1404: vcagent.exe
     1440: svchost.exe
     1480: HsQuotas.exe
     1740: inetinfo.exe
     1780: EmailAgent.exe
     1856: snmp.exe
     1884: sysdown.exe
     1920: smhstart.exe
     2192: svchost.exe
     2388: cmd.exe
     2396: hpsmhd.exe
     2444: cqmgserv.exe
     2464: cqmgstor.exe
     2484: HSphere.exe
     2596: wmiprvse.exe
     2676: cmd.exe
     2684: rotatelogs.exe
     2692: cmd.exe
     2700: rotatelogs.exe
     2732: searchindexer.exe
     2812: hpsmhd.exe
     2824: cqmghost.exe
     2852: svchost.exe
     3044: cmd.exe
     3052: rotatelogs.exe
     3080: cmd.exe
     3088: rotatelogs.exe
     5452: svchost.exe
     5596: GravitixService.exe
     7392: csrss.exe
     7232: winlogon.exe
     6888: csrss.exe
     9832: winlogon.exe
    10388: wawrapper.exe
    10352: cpqnimgt.exe
     9496: msiexec.exe
     6068: w3wp.exe
     4748: webalizer.exe
3) I also learned from http://support.microsoft.com/kb/243330/en-us that Sid:          S-1-5-18 means:
SID: S-1-5-18
Name: Local System
Description: A service account that is used by the operating system
That is all great info, but I am not sure I can put together what I have learned to attempt and get closer towards identifying how in the world users are being created and then being assigned administrative group rights.
I am a Linux person mostly, but I am comfortable following a properly explained thread regarding windows 2003 R2 Enterprise issues.
The server is fully patched and it is running Lumension security product. What's more, Norman Malware tracker, tdskiller.exe (Kaspersky) and McAfee rootkitremover.exe have been run without any apparent Malware/Virus infection
Hope someone with advanced admin skills can advise.
Thank you

Hi,
You mentioned that, “I am trying to identify how the following hack is happening”, would you please tell us that why did you think the event represent a hacking behavior?
In a Shared Server Hosting environment, the underlying hosting control panel tool (Hsphere in this case) should be creating only virtual FTP users with a specific group. So no users with Administrative group should be ever created. If this happens,
it constitutes a breach of server security=positive hacking attempt.
>how in the world users are being created and then being assigned administrative group rights.
In addition, would you please be more specific about this question? Did you find the event message on a domain joined machine?
I want to be able to understand in full how/what process is allowing users to be created with Admin rights. In other words, I want to know what IP was used to issue the command, if ASP.net was used (abused in this case), or anything else related to
it so that we can patch this particular hole.
Best Regards,
Amy

Data inconsistency: posting with restricted transaction type (FAA_POST047)

Hi colleagues!
I have the following error:
Data inconsistency: posting with restricted transaction type
Message no. FAA_POST047
Diagnosis
You are trying to post in company code 1000 with transaction type 130 in ledger group 0N. According to table TABWA, this transaction type is limited. Nonetheless, according to your entries, you want to post to area 11.
System Response
Using limited transaction types is obsolete and would lead to an inconsistent posting in this situation. The system rejects the posting.
Procedure
Use a transaction type that is not limited. And, if possible, choose the ledger group and/or depreciation area on the initial screen.
According to specific accounting we shouldn't post to one of the depr. area, so most of the tr.types are restricted to post to all areas except this one.
Because of this, posting from MM with acc.assignment 'A' is impossible - I have this error.
Any ideas how to solve?
Thanks in advance

Hi Anton
This looks like your transaction type -130 is limited to post only in ledger group-0N as per the transaction type configuration. Due to which system is unable to post all the ledgers and hence this lead to inconsistency.
Please verify the transaction type 130- in configuration T code - OAYA and see if it is restricted by depreciation area (eventually allow to post only ledger group- 0N.
Tcode - OAYA (Limit Transaction Types to Depreciation Areas)
please verify and let us know the update. hope this helps
Best Regards
Jomon

Where to see activities, which are created for the campaign with target group

Hi
I have created a Communication Method in SPRO -> CRM -> Marketing -> Marketing Planning & Campaign Management -> Campaign Executtion - Define Communication Method : Activity has been configured
Activities are not appearing after creation of campaign with target group.
Where to see activities, which are created for the campaign with target group?
Regards
Hamid

Hello,
alternatively to check table CRMD_ORDERADM_H directly you can use the related transactions search for the campaign:
This should bring all activities generated by the campaign. If this is empty first check the job log of the campaign execution job again:
This gives information if any target group members have business transactions created. If the log does not contain the required information you can debug from SM37. The business transactions (activities, leads, sales orders) are generated from function module CRM_MKTTGGRP_PROC_CREATE.
best regards,
Johannes

Material replication from R/3 to SRM - Issue with Material group

Hello All,
                  I am working on BADI PRODUCT_CUSTOMER2 and method MAP_R3_TO_CRM_MATERIALMaterial replication part from R/3 to SRM.
I am using a Ztable to map r/3 material group to SRM material group(Product category).
For example Material M1 with material group 100 is transferred to SRM. Material group(Product category) 100 exist in SRM, but I am changing the material group to 200 in the product_customer2 badi. its working fine.
In another scenario, Material with material M1 with material group 300. Material group(product category) 300 does not exist in SRM,
I am changing the material group to 200 in the bdoc, in the product_customer2 badi. It is not working. The LUW is failing in SMQ2 transaction with the error "Error in Mapping (Details: transaction SMW01)". The BDOC is failing with error "Category for material group 300 does not exist"
I tried to deactivate the badi PRODUCT_CUSTOMER2, even then the FM MAP_BAPIMTCS_AND_PROCESS is validating the material group from R/3.
I tried to change the material group 300 to the existing material group 200 at initial stage in debugging in function module MAP_BAPIMTCS_AND_PROCESS but still the bdoc is failing with error "No storage form defined for product type 01 / logical system".
I am doing my testing using the following steps.
1. change the material descriptioni in MM02 in R/3.
2. An item is displayed in the queue in SMQ2 in SRM.
3. I have debugged the LUW and analyzed my badi by setting breakpoint at method MAP_R3_TO_CRM_MATERIAL, its changing the material group in the bdoc properly.
   that didnt work.
   also i tried to change the material group in the function module MAP_BAPIMTCS_AND_PROCESS before the badi is called.
4. I am checking the BDOc status using tcode SMW01 and checking the material using tcode COMMPR01.
can someone tell me how I can change the R/3 material group to SRM material group at the time of mapping in SRM?
Thanks
Sathish PM

Hi find below for the product cat
Steps to create the product category in SRM:
1) Create MM material groups in ECC client. This will create a transport. Go to SRM Tcode R3AS and select the object u201CDNL_CUST_PROD1u201D from the list and run it. You can monitor the job using R3AM1 in SRM. This will bring the material group into SRM. This can be seen in TCode u201CCOMM_HIERARCHYu201D in SRM.
2) Once it is done. Go to IMG in SRM and go to path SRM> SRM server> Cross app biz settings> Account aassigmnet> Define GL code for Acc *** Cat and Prod Cat. Maintain the GL code against this prod cat for all the account assignment codes. This is client specific setting and need to be done in every client by opening it. This GL code is given in the form in ticket.
3) Do a test and check if the product category is available for procurement in SC.
Regards,
Satish

What's wrong with this content type definition?

Could someone tell me what's wrong with this content type definition? When I click "New Folder" in a custom list, it should bring two fields 1) Name 2) Custom Order. However in my case when I click new folder, I see 1) Member (which is totally
weird) 2) custom order. Where is it getting that Member field from?
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">

<ContentType ID="0x012000c0692689cafc4191b6283f72f2369cff"
Name="Folder_OrderColumn"
Group="Custom"
Description="Folder with order column"
Inherits="TRUE"
Version="0">
<FieldRefs>
<FieldRef ID="{35788ED2-8569-48DC-B6DE-BA72A4F87B7A}" Name="Custom_x0020_Order" DisplayName="Custom Order" />
</FieldRefs>
</ContentType>
</Elements>

Hi,
According to your post, my understanding is that you had an issue about the custom content type with custom column.
I don’t think there is any issue in the content type definition, and it also worked well in my environment.
Did you have the Member field in the project?
I recommend you create a simple project only with one custom Order column and one custom Folder_OrderColumn, then you can add more fields one by one.
By doing this, it will be easier to find out the root cause of this error.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

Vendor Payment with different document types

Dear Sapguru,
We have a scenario where a particular vendor payable is in two different document types for example, RE and KZ.
When we execute TC F110, the payment proposal is grouping the payments by document type. I.e. it grouped all the documents under type RE and grouped all the documents under type KZ and created two line items in the payment proposal.
Actually, we want to have a single group consisting of all the document types payable to the vendor.
We have checked different SAP notes and also verified out system settings, but the problem still remains.
Can somebody let us know how to group all the open items in a single line item in F110 irrespective of document types.
Thanks in Advance.
Regards.,
Rama

Dear Naravi,
the main factor which affects the grouping of items is the Structure ZHLG1:
ZBUKR
ABSBU
LIFNR
KUNNR
EMPFG
WAERS
ZLSCH
HBKID
HKTID
BVTYP
SRTGB
SRTBP
XINVE
PAYGR
UZAWE
DTWS1
DTWS2
DTWS3
DTWS4
KIDNO
All these fields have to coincide, to have a single payment.
Please check why two documents with different document type are paid into two different payments.
Read the SAP notes 109233 and 164835 and 305414 as well.
I hope this helps.
Mauri

Req approval process with Purchasing groups

Hi Gurus,
Can anybody please help me with this. I need to setup the req approval process with purchaisng groups. how do i do that? The scenario is this: 1) A computer is requested and it is worth 1200 USD and the requestor puts the pur grp in the PR. since this is level 1 the email should only go to one person. ( The levels are 1000 -4999 - level1, 5000 - 9999 level2, 10000 and above level3). Can anybody please help me with this. Quick response is greatly appreciated
thanks
Anusa
Edited by: anusha vemulapati on Mar 10, 2009 9:44 PM

Hi,
The steps are as follows:
Create Characteristics & link to comm. structre (CEBAN for PR)
Create Class & link to characteristic
Create Release Groups & link to class
Create Release Codes
Release Indicator
Set up strategies
- Strategies & Codes
- Prerequeirements
- Status
- Assign values for strategies
Set overall / item for doc type (PR only)
Create and allocate autorisation profiles
You can see the same in SAP123.com with screen shots.
REgards
Ram

IMac freezes with Parallels 7

My system keeps getting kernel Panics with parallels 7. No other programs replicate the issue. And it only happens once parallels has fully loaded windows 7.
Set up
iMac 2011 i7 3.4Ghz
Lion 10.7.3
Parallels 7 Build 7.0.15094
Windows 7 Ultimate
This is the panic log I get from parallels
i would appreciate help, and sharing similar stories or work arrounds.
Thanks,
Rodrigo
Sun May 6 20:30:12 2012
panic(cpu 4 caller 0xffffff80002c266d): Kernel trap at 0xffffff80002b3a57, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000800000008, CR3: 0x000000006ec4202d, CR4: 0x00000000000606e0
RAX: 0x0000000000000010, RBX: 0xffffff803439fb00, RCX: 0x0000000000000006, RDX: 0x0000000800000000
RSP: 0xffffff820d8a39b0, RBP: 0xffffff820d8a39b0, RSI: 0x0000000000000000, RDI: 0x0000000800000000
R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0x00000000ffffffff, R11: 0x0000000000000004
R12: 0x00000000000bd332, R13: 0xffffff820cd82004, R14: 0x0000000000000226, R15: 0x0000000000000011
RFL: 0x0000000000010206, RIP: 0xffffff80002b3a57, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x0000000800000008, Error code: 0x0000000000000000, Faulting CPU: 0x4
Backtrace (CPU 4), Frame : Return Address
0xffffff820d8a3670 : 0xffffff8000220702
0xffffff820d8a36f0 : 0xffffff80002c266d
0xffffff820d8a3890 : 0xffffff80002d7a1d
0xffffff820d8a38b0 : 0xffffff80002b3a57
0xffffff820d8a39b0 : 0xffffff8000644a58
0xffffff820d8a3a00 : 0xffffff7f81f68a00
0xffffff820d8a3a20 : 0xffffff7f81f74017
0xffffff820d8a3ae0 : 0xffffff7f81f6e4ee
0xffffff820d8a3ba0 : 0xffffff7f81f6a318
0xffffff820d8a3be0 : 0xffffff8000652a5e
0xffffff820d8a3c40 : 0xffffff800065341b
0xffffff820d8a3d80 : 0xffffff80002a3b78
0xffffff820d8a3e80 : 0xffffff8000223006
0xffffff820d8a3eb0 : 0xffffff8000214829
0xffffff820d8a3f10 : 0xffffff800021bb58
0xffffff820d8a3f70 : 0xffffff80002aeb80
0xffffff820d8a3fb0 : 0xffffff80002d8383
      Kernel Extensions in backtrace:
         com.parallels.kext.prl_hypervisor(7.0)[00000000-0000-0000-0000-000000000000]@0x ffffff7f81f67000->0xffffff7f81fc2fff
            dependency: com.apple.iokit.IOPCIFamily(2.6.8)[F63D4ABE-42DA-33EF-BADD-3415B0CB0179]@0xffff ff7f80823000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[A87503EC-9C34-3613-9A86-7296B23BC344]@0xfffff f7f80bb1000
BSD process name corresponding to current thread: prl_vm_app
Mac OS version:
11D50
Kernel version:
Darwin Kernel Version 11.3.0: Thu Jan 12 18:47:41 PST 2012; root:xnu-1699.24.23~1/RELEASE_X86_64
Kernel UUID: 7B6546C7-70E8-3ED8-A6C3-C927E4D3D0D6
System model name: iMac12,2 (Mac-942B59F58194171B)
System uptime in nanoseconds: 340742188120
last loaded kext at 230435972408: com.apple.filesystems.smbfs     1.7.0 (addr 0xffffff7f81fee000, size 241664)
last unloaded kext at 235452292864: com.apple.driver.AppleUSBUHCI     4.4.5 (addr 0xffffff7f80a3f000, size 65536)
loaded kexts:
com.parallels.filesystems.prlufs     2010.12.28
com.parallels.kext.prl_vnic     7.0 15094.749908
com.parallels.kext.prl_netbridge     7.0 15094.749908
com.parallels.kext.prl_hid_hook     7.0 15094.749908
com.parallels.kext.prl_hypervisor     7.0 15094.749908
com.parallels.kext.prl_usb_connect     7.0 15094.749908
com.apple.filesystems.smbfs     1.7.0
com.apple.filesystems.msdosfs     1.7.1
com.apple.driver.AppleHWSensor     1.9.4d0
com.apple.filesystems.autofs     3.0
com.apple.driver.AppleBluetoothMultitouch     66.6
com.apple.driver.AudioAUUC     1.59
com.apple.driver.AGPM     100.12.42
com.apple.driver.AppleMikeyHIDDriver     122
com.apple.driver.AppleHDA     2.1.7f9
com.apple.driver.AppleMikeyDriver     2.1.7f9
com.apple.driver.AppleUpstreamUserClient     3.5.9
com.apple.driver.AppleMCCSControl     1.0.26
com.apple.kext.ATIFramebuffer     7.1.8
com.apple.iokit.IOUserEthernet     1.0.0d1
com.apple.driver.AppleSMCLMU     2.0.1d2
com.apple.Dont_Steal_Mac_OS_X     7.0.0
com.apple.driver.AudioIPCDriver     1.2.2
com.apple.driver.ACPI_SMC_PlatformPlugin     4.7.5d4
com.apple.driver.AppleLPC     1.5.3
com.apple.driver.AppleBacklight     170.1.9
com.apple.ATIRadeonX3000     7.1.8
com.apple.driver.AppleIntelHD3000Graphics     7.1.8
com.apple.iokit.SCSITaskUserClient     3.0.3
com.apple.driver.AppleIRController     312
com.apple.driver.AppleUSBCardReader     3.0.1
com.apple.iokit.IOAHCIBlockStorage     2.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless     1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib     1.0.0d1
com.apple.BootCache     33
com.apple.driver.AppleUSBHub     4.5.0
com.apple.driver.AppleFWOHCI     4.8.9
com.apple.driver.AirPort.Atheros40     502.60.2
com.apple.iokit.AppleBCM5701Ethernet     3.0.8b2
com.apple.driver.AppleAHCIPort     2.2.0
com.apple.driver.AppleUSBEHCI     4.5.8
com.apple.driver.AppleEFINVRAM     1.5.0
com.apple.driver.AppleACPIButtons     1.4
com.apple.driver.AppleRTC     1.4
com.apple.driver.AppleHPET     1.6
com.apple.driver.AppleSMBIOS     1.7
com.apple.driver.AppleACPIEC     1.4
com.apple.driver.AppleAPIC     1.5
com.apple.driver.AppleIntelCPUPowerManagementClient     167.3.0
com.apple.nke.applicationfirewall     3.2.30
com.apple.security.quarantine     1.1
com.apple.driver.AppleIntelCPUPowerManagement     167.3.0
com.apple.driver.AppleBluetoothHIDKeyboard     152.3
com.apple.driver.AppleHIDKeyboard     152.3
com.apple.kext.triggers     1.0
com.apple.driver.AppleMultitouchDriver     220.62.1
com.apple.driver.IOBluetoothHIDDriver     4.0.3f12
com.apple.driver.AppleAVBAudio     1.0.0d11
com.apple.driver.DspFuncLib     2.1.7f9
com.apple.driver.AppleSMBusController     1.0.10d0
com.apple.iokit.IOSurface     80.0
com.apple.iokit.IOFireWireIP     2.2.4
com.apple.iokit.IOBluetoothSerialManager     4.0.3f12
com.apple.iokit.IOSerialFamily     10.0.5
com.apple.iokit.IOAVBFamily     1.0.0d22
com.apple.driver.AppleHDAController     2.1.7f9
com.apple.iokit.IOHDAFamily     2.1.7f9
com.apple.iokit.IOAudioFamily     1.8.6fc6
com.apple.kext.OSvKernDSPLib     1.3
com.apple.driver.ApplePolicyControl     3.0.16
com.apple.driver.AppleSMC     3.1.1d8
com.apple.driver.IOPlatformPluginFamily     4.7.5d4
com.apple.driver.AppleSMBusPCI     1.0.10d0
com.apple.driver.AppleGraphicsControl     3.0.16
com.apple.driver.AppleBacklightExpert     1.0.3
com.apple.driver.AppleThunderboltEDMSink     1.1.3
com.apple.driver.AppleThunderboltEDMSource     1.1.3
com.apple.kext.ATI6000Controller     7.1.8
com.apple.kext.ATISupport     7.1.8
com.apple.iokit.IONDRVSupport     2.3.2
com.apple.driver.AppleIntelSNBGraphicsFB     7.1.8
com.apple.iokit.IOGraphicsFamily     2.3.2
com.apple.driver.AppleThunderboltDPOutAdapter     1.5.9
com.apple.driver.AppleThunderboltDPInAdapter     1.5.9
com.apple.driver.AppleThunderboltDPAdapterFamily     1.5.9
com.apple.driver.AppleThunderboltPCIDownAdapter     1.2.1
com.apple.driver.BroadcomUSBBluetoothHCIController     4.0.3f12
com.apple.driver.AppleUSBBluetoothHCIController     4.0.3f12
com.apple.iokit.IOBluetoothFamily     4.0.3f12
com.apple.iokit.IOSCSIMultimediaCommandsDevice     3.0.3
com.apple.iokit.IOBDStorageFamily     1.6
com.apple.iokit.IODVDStorageFamily     1.7
com.apple.iokit.IOCDStorageFamily     1.7
com.apple.iokit.IOUSBHIDDriver     4.4.5
com.apple.iokit.IOAHCISerialATAPI     2.0.1
com.apple.iokit.IOSCSIBlockCommandsDevice     3.0.3
com.apple.iokit.IOUSBMassStorageClass     3.0.1
com.apple.iokit.IOSCSIArchitectureModelFamily     3.0.3
com.apple.driver.AppleUSBMergeNub     4.5.3
com.apple.driver.AppleUSBComposite     4.5.8
com.apple.driver.XsanFilter     403
com.apple.driver.AppleThunderboltNHI     1.3.2
com.apple.iokit.IOThunderboltFamily     1.7.4
com.apple.iokit.IOUSBUserClient     4.5.8
com.apple.iokit.IOFireWireFamily     4.4.5
com.apple.iokit.IO80211Family     412.2
com.apple.iokit.IOEthernetAVBController     1.0.0d5
com.apple.iokit.IONetworkingFamily     2.0
com.apple.iokit.IOAHCIFamily     2.0.7
com.apple.iokit.IOUSBFamily     4.5.8
com.apple.driver.AppleEFIRuntime     1.5.0
com.apple.iokit.IOHIDFamily     1.7.1
com.apple.iokit.IOSMBusFamily     1.1
com.apple.security.sandbox     177.3
com.apple.kext.AppleMatch     1.0.0d1
com.apple.security.TMSafetyNet     7
com.apple.driver.DiskImages     331.3
com.apple.iokit.IOStorageFamily     1.7
com.apple.driver.AppleKeyStore     28.18
com.apple.driver.AppleACPIPlatform     1.4
com.apple.iokit.IOPCIFamily     2.6.8
com.apple.iokit.IOACPIFamily     1.4

Hmmm, I'm jealous of your iMac, but no problems here...
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4

Database Adapter: cannot access table with complex record type as columns

Hi all,
I cannot perform any operations on a table that has columns with complex record type.
I have created a table to store purchase order details.
Sample script:
CREATE type XX_CUST_INFO_TYP as object
ssn VARCHAR2(20),
rating NUMBER(15)
CREATE type XX_ITEM_TYP as object
item_name VARCHAR2(20),
unit_price NUMBER(15),
quantity NUMBER(15)
CREATE table XX_PORDER (cust XX_CUST_INFO_TYP, porder XX_ITEM_TYP);
When i try to access the table X_PORDER in jdev through a database Adapter, i receive the error as
"some tables contains columns that are not recognized by the database adpter"
1.) so in this case, how to include such tables that have complex types?
Also, check out this scenario also..
1. add a table through a database adapter
2. drop the table in backend
3. i can still see the table and its structure in the database adapter wizard even after restarting Jdeveloper.. How is it possible?
These are some really interesting scenarios to experiment. Please suggest your ideas on this..
Thanks All!

Hi Hem,
for a select you could select against a view. And for inserts you could create a stored procedure. They support complex types since 10.1.2. Complex types support in tables/views was added for 11 (next major release).
You might be able to use PureSQL as a workaround too, i.e.
insert into XX_PORDER values (XX_CUST_INFO_TYP(?,?), XX_ITEM_TYP(?, ?, ?))
As for your other problem, in 10.1.2/10.1.3 the DBAdapter wizard sits on top of the Jdev Offline Tables and TopLink Mapping Workbench components. When you remove a table in the wizard it won't delete the Offline DB component. It was added by the wizard, but afterwards it is public to the entire Jdev project. You must remove it from Jdev yourself. This has been improved for the next major release too, no artifacts from underlying components are created.
To remove it select:
Offline DB Objects -> <schema> -> <table> and try File.. Erase From Disk.
Thanks
Steve

Workbench Execution with Parallel Group Type

Similar Messages

Maybe you are looking for