WorkerRoles not running after 1/1

Hi! We have a problem with WorkerRoles not running after new years eve. Everything looks fine in the management portal (status running as usual), but no work is being executed. The same code and database runs fine in the local emulator.
Has anyone else encountered this issue or have an idea of where to look for a solution?

Thanks for your reply!
There looks to be some logging (not my code, and the developer is unreachable atm), but all I can find are the .tsf-files when I remote into the server (tried the table2csv tool, but it doesn't output anything, including an error). I should have mentioned
I already tried checking the event log, but there doesn't appear to be anything of relevance in there.
If you have any other idea, that would be great! I haven't used Azure much, and this is my first issue that is not possible to replicate with the emulator..

Similar Messages

Premiere Elements 12 will not run after installing on my HP laptop with Windows 7.

Premiere Elements 12 will not run after installing on my HP laptop with Windows 7. HOWEVER, PE11, PE10 & PE 9 all run without a problem. I contacted HP, and there are NO NEW or ADDITIONAL video drivers available from HP.
I have NEVER had a problem running ANY software on this laptop -- except for PREMIERE ELEMENTS 12!

Premiere Elements 12 will not run after installing on my HP laptop with Windows 7. HOWEVER, PE11, PE10 & PE 9 all run without a problem. I contacted HP, and there are NO NEW or ADDITIONAL video drivers available from HP.
I have NEVER had a problem running ANY software on this laptop -- except for PREMIERE ELEMENTS 12!

LiveUpdate 6-not running after last update

application not running after start win7x64, but I did not set anything and not even start
pls. test application
main PC:
moth. H97
CPU: Corei-5
VGA: GTX 560Ti
thx

Hi,
I am pretty sure you want to know what forum's experienced users think about Live Update, don't you?
Live Update is terrible, and in most cases it's better to remove it and forget about it. It's alright to keep it installed and run to check for updates but a lot better and safer to install them manually (yourself) from MSI's product page. And forget about updating BIOS. It's as good as smashing the BIOS chip with the hammer MFlash or Forum's tool is much safer and more efficient.
What updates did it do? What drivers/utilities do you have installed from the CD/MSI's page?

Safari not running after ios8 update for ipad

I updated my Ipad with Retina display with ios8 lately and noticed that safari is not running after update. whenever i try to open it it just pop open and close immediately and automatically.
There was no problem of this kind before the update.
Any solution??

If the above doesn't work:
(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing will be reset

Oracle automatic statistics optimizer job is not running after full import

Hi All,
I did a full import in our QA database, import was successful, however GATHER_STATS_JOB is not running after sep 18 2010 though its enable and scheduled, i did query last_analyzed table to check and its confirmed that it didnt ran after sep18,2010.
Please refer below for the output
OWNER JOB_NAME ENABL STATE START_DATE END_DATE LAST_START_DATE NEXT_RUN_D
SYS GATHER_STATS_JOB TRUE SCHEDULED 18-09-2010 06:00:02
Oracle defined automatic optimizer statistics collection job
=======
SQL> select OWNER,JOB_NAME,STATUS,REQ_START_DATE,
to_char(ACTUAL_START_DATE, 'dd-mm-yyyy HH24:MI:SS') ACTUAL_START_DATE,RUN_DURATION
from dba_scheduler_job_run_details where
job_name='GATHER_STATS_JOB' order by ACTUAL_START_DATE asc; 2 3 4
OWNER JOB_NAME STATUS REQ_START_DATE ACTUAL_START_DATE
RUN_DURATION
SYS GATHER_STATS_JOB SUCCEEDED 16-09-2010 22:00:00
+000 00:00:22
SYS GATHER_STATS_JOB SUCCEEDED 17-09-2010 22:00:02
+000 00:00:18
SYS GATHER_STATS_JOB SUCCEEDED 18-09-2010 06:00:02
+000 00:00:26
What could be the reason for GATHER_STATS_JOB job not running although its set to auto
SQL> select dbms_stats.get_param('AUTOSTATS_TARGET') from dual;
DBMS_STATS.GET_PARAM('AUTOSTATS_TARGET')
AUTO
Does anybody has this kind of experience, please share
Apprecitate your responses
Regards
srh

?So basically you are saying is if none of the tables are changed then GATHER_STATS_JOB will not run, but i see tables are updated still the job is not running. I did >query dba_scheduler_jobs and the state of the job is true and scheduled. Please see my previous post on the output
Am i missing anything here, do i look for some parameters settings
So basically you are saying is if none of the tables are changed then GATHER_STATS_JOB will not run,GATHER_STATS_JOB will run and if there are any table in which there's a 10 percent change in data, it will gather statistics on that table. If no table data have changes less than 10 percent, it will not gather statistics.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14211/stats.htm#i41282
Hope this helps.
-Anantha

Premier elements 12 will not run after re-install

Premier elements 12 will not run after re-install - it is legal and registered with adobe under my ID. WTF! The reason I re-installed it was because it could not find the internet - which is working. And premier 12 was working for a while then quit - that is why as a last ditch effort - i re-installed it. Any ideas?

scottg
Please review the following for possible solutions to your Premiere Elements 12 issue.
http://www.atr935.blogspot.com/2014/04/pe12-sign-in-failure-connect-to.html
http://www.atr935.blogspot.com/2014/04/pe12-premiere-elements-12-editor-will.html
Looking forward to learning of your results when your schedule permits.
Thank you.
ATR

Finder will not run after re-start

Finder will not run after a re-start. Any quick fixes?

scottg
Please review the following for possible solutions to your Premiere Elements 12 issue.
http://www.atr935.blogspot.com/2014/04/pe12-sign-in-failure-connect-to.html
http://www.atr935.blogspot.com/2014/04/pe12-premiere-elements-12-editor-will.html
Looking forward to learning of your results when your schedule permits.
Thank you.
ATR

Firefox will not run after System restore or running in compatibility mode for windows 98. How do I fix this? I already tried all other solutions on this site.

I was running Firefox fine just yesterday. I screwed up the registry a litle while removing an installed program completely, so I restored the system and everything appeared to work fine. I then decided to play an old video game, Return to Krondor, which was made back in 1998, so I ran the program with no other programs running in compatibility for windows 98. After finishing the game, I closed it and put the computer in hibernation mode. I come back today and firefox will not run at all. It is not running in the background and there are no programs running. There are no services running which could interfere with it. I think somehow Firefox may think I'm in compatibility mode still, but I have no idea.
I'm running windows Vista 32 - bit with an AMD 2.4ghz processor, 4gb ram on an Emachine computer. I have already tried system restore, restart, processes etc. Nothing works. I can still run Internet explorer and all other programs.

The person that I was assisting, has Windows 7 which has 64 bit system. Her browser was IE 10.
Was IE11 ever offered (or installed) via Windows Update?
Is her computer currently fully-patched at Windows Update?
Is Adobe Shockwave Player v12.1 (or higher) installed on her computer?
Is Adobe Flash Player v15.0.0.189 (or higher) installed on her computer?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Troubleshoot Shockwave Player installation for Windows
http://kb2.adobe.com/cps/403/kb403264.html
You will find support for Shockwave Player in this forum:
http://forums.adobe.com/community/webplayers/webplayers_shockwave
~Robear Dyer (PA Bear) MS MVP-Windows Client since 2002 Disclaimer: MS MVPs neither represent nor work for Microsoft

Issues with iTunes 9.2 not running after download.

I have been trying to get iTunes 9.2 going since the 24th when I purchased my iPhone 4. I have had NO LUCK getting iTunes to properly run after downloading the flie.
I have Vista 64 bit.
When I download the file and attempt to run it, I get the error "Publisher could not be verified" I select run anyway and nothing happens.
I have tried every suggestion made on this form
I have-
Tried to run as administrator
Deleted temp folder in Users/Name
Ran windows installer cleanup utility
downloaded the file from firefox and IE
It's very annoying because the 32 bit will run and install, but the 64 bit will not. Any suggestions?

None of your software will install on any computer I own. I tried to download Safari and download iTunes through that browser to see if the results would be different, but after downloading it that file does NOTHING after being ran. It's so pathetic I can't even sync my iPhone 4 to my computer after having it since Thursday. Three different computers three different downloads with 2 different browsers.
I'm getting ready to just box up this phone and return it, if I cant even sync it to iTunes, it's useless to me.
If I download through Firefox, nothing happens when I run the executable.
If I download it through Internet Explorer, I get the message that it is an invalid publisher, or publisher could not be identified.
I have erased my temp folder, deleted browser history on both browsers, still nothing.
I am running it in Administrator mode, I have done every suggestion that you have on your site and nothing works.

OC4J not running after creating workspace and projects.

Created one workspace and added six projects. Added PostGes jar to library manager. Before doing this, the OC4J would run a test application successfully. After creating the workspace and project, I created another simple workspace with two JSP, on linked to the other. When trying to run this project get the following:
Apr 17, 2008 10:51:53 AM com.evermind.server.jms.JMSMessages log
INFO: JMSServer[]: OC4J JMS server recovering transactions (commit 0) (rollback 0) (prepared 0).
Apr 17, 2008 10:51:53 AM com.evermind.server.jms.JMSMessages log
INFO: JMSServer[]: OC4J JMS server recovering local transactions Queue[jms/Oc4jJmsExceptionQueue].
Apr 17, 2008 10:51:55 AM oracle.j2ee.util.LoggingUtils logAndReturnMessage
WARNING: Exception creating connection pool. Exception: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : org.postgresql.Driver
08/04/17 10:51:55 SEVERE: ApplicationStateRunning.initConnector Error occurred initializing connectors. Exception is: Exception creating connection pool. Exception: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : org.postgresql.Driver
08/04/17 10:51:55 SEVERE: ApplicationStateRunning.initConnector Stack trace: oracle.oc4j.sql.DataSourceException: Exception creating connection pool. Exception: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : org.postgresql.Driver
     at com.evermind.server.ApplicationStateRunning.initDataSourceConnectionPool(ApplicationStateRunning.java:2072)
     at com.evermind.server.ApplicationStateRunning.initDataSourceConnector(ApplicationStateRunning.java:2017)
     at com.evermind.server.ApplicationStateRunning.initConnector(ApplicationStateRunning.java:1272)
     at com.evermind.server.ApplicationStateRunning.initConnectors(ApplicationStateRunning.java:345)
     at com.evermind.server.ApplicationStateRunning.initializeApplication(ApplicationStateRunning.java:206)
     at com.evermind.server.Application.setConfig(Application.java:438)
     at com.evermind.server.Application.setConfig(Application.java:339)
     at com.evermind.server.ApplicationServer.addApplication(ApplicationServer.java:1895)
     at com.evermind.server.ApplicationServer.initializeDeployedApplications(ApplicationServer.java:1651)
     at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:1034)
     at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:131)
     at java.lang.Thread.run(Thread.java:595)
Caused by: javax.resource.ResourceException: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : org.postgresql.Driver
     at oracle.oc4j.sql.spi.ResourceAdapterImpl.createDataSourceConnectionPool(ResourceAdapterImpl.java:106)
     at oracle.oc4j.sql.DataSourceUtils.getDataSourceConnectionPool(DataSourceUtils.java:330)
     at com.evermind.server.ApplicationStateRunning.initDataSourceConnectionPool(ApplicationStateRunning.java:2053)
     ... 11 more
Caused by: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : org.postgresql.Driver
     at oracle.oc4j.sql.config.DataSourceConfigUtils.createConnectionFactory(DataSourceConfigUtils.java:283)
     at oracle.oc4j.sql.DataSourceConnectionPoolImpl.<init>(DataSourceConnectionPoolImpl.java:108)
     at oracle.oc4j.sql.spi.ResourceAdapterImpl.createDataSourceConnectionPool(ResourceAdapterImpl.java:99)
     ... 13 more
Caused by: oracle.classloader.util.AnnotatedClassNotFoundException:
     Missing class: org.postgresql.Driver
     Dependent class: oracle.oc4j.sql.config.DataSourceConfigUtils
     Loader: oc4j:10.1.3
     Code-Source: /C:/Jdeveloper10/j2ee/home/lib/oc4j-internal.jar
     Configuration: <code-source> in META-INF/boot.xml in C:\Jdeveloper10\j2ee\home\oc4j.jar
Remove the posgres jar from the library manager and still not able to run simple two page applications.
All the projects in the other workspace compile fine. The prolblem is that now I am not able to use the internal OC4J. I remove the workspace with the five projects, and the JARs and the two page app will not run.
The OC4J is running when launched from the IDE, ti just can find the pages.
New install of JDEV and the two page app will run fine. Add two user two user libraries and the app will not run.
Thank you,
Ben Carter

Do you have a database connection to postgress defined in JDeveloper?
JDev might be picking this up and trying to add a datasource for it to the embedded OC4J - so try removing it, or alternatively add the postgress JDBC driver jar files to the libraries node under tools->embedded OC4J preferences.

Firefox will not run after update (3.6 8.0) WinXP

I noticed that my mother's laptop was running Firefox 3.6 still, and offered to update. I downloaded 8.0, and ran the install. Had no issues with the install, no errors, nothing. I told it to run after the install finished, and it never came up. I tried the icon, still nothing. I downloaded Firefox 7.0, and installed it, figuring there might have been an issue with 8.0, since it just came out, nd tried it, same result. I rebooted the system, and tried again, still nothing happens, just the little hourglass for a moment, and then.. nothing. There is nothing in the task manager, no process for firefox. I tried running the profile manager and the plain program from the run under the start menu of windows with antivirus turned off, and got nothing there either.
I'm running windows XP Pro
::edit::
I was able to re-instal 3.6.24 back over top, and it works, but I would like to update it for her still, if it can be done.

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls

Mapping is not run after adding to existing Process Flow

I am about to scream.
I have a process flow that has been running fine.
I added a mapping to the existing process flow, deployed the process flow, and now when I run the process flow it will not run the new added mapping.
What gives? I am going to recreate the process flow, but I will not recreate a new process flow everytime I add a mapping to it.
What am I doing wrong.
thanks for any help.
greG

Oleg,
Thanks so much for all the help. I read the other posts and checked my mapping but nothing helped.
I had to put a transition line directly from the fork to my new process and it worked.
I think it was kind of a logic error on my part.
I forgot had all my maps that were called from the Fork just going straight to either Error Warning or Success endpoints.
I tried to add another process after one of the mappings.
I forgot that to do that I would have to "OR" up all the transitions coming from the forked maps.
Then proceed from there.

FaceTime will not run after update to 10.6.7

Updated the OS to 10.6.7 earlier today. Tried to run FaceTime this evening, and found that it will not start. First indication of a problem was that the FaceTime icon was missing, instead a generic icon was present. Tried to start FT, and found that the computer will not let it start. Was told that this version of FT is not compatible with the installed OS.
I then did something that was probably wrong, but I deleted FT, in hopes that I could then download the latest version of FT from the AppStore. Not only did that strategy not work - I am still told that FT is already installed on this Mac, so cannot update it - but I no longer have FT in any version on my Mac.
Probably should have waited to download and install the OS update, but that is history now. Instead, I have two Apple apps that will not work after running the update.
Any Ideas??

Reinstall the app from the Applications install disk that came with the computer. That will fix icon issues, and make sure that the version is correct. FT apparently has not been updated since the 'early 2011' MBPs came out, so the disks that came with the computer should take care of it.
I was able to get FT working in this way, and am now able to keep in touch with my wife, while away on business. Much better!!

Oracle dbsonsole not running after drop temp files

before drop temp tablespace
i was create temp2 tablespace as default temp tablespace
after that
i have droppped temp files last to first
temp4.dbf ..3..2
when i have clicked to delete temp table space in dbconsole
after a few time dbconsole not running
in iexplore
i have tired to start db control again with emctl start dbconsole
it was already running
then i have command
emctl status dbconsole
is not running
i have looked log file i see temp file warning
now what can i do to start dbconsole again

Dbconsole doesn't work proper without temp files. So you should create temp file for temporary tablespace in some other tool.

New version (17) will not run after downloading and installing. Tried twice ...uninstalling between downloads but to no avail. Have re-installled v.15

this is really to report what occurred this morning.
since the update to v 17 Firefox would not run
d/loaded the new version twice (uninstalling between) but to no avail - the program would not open although Task Manager shows the process running.
have re-installed v 15 so I have a browser.
lack of a way to report such problems is a weakness which needs addressing

A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

WorkerRoles not running after 1/1

Similar Messages

Maybe you are looking for