Workflow is starting with status Error.

Hi All,
I am trigerring my workflow from an custom event, my workflow is getting trigerred but the status is showing as ERROR. I have already checked SWEL to check event creation, even in event simulation i am able to see that my workflow has been trigerred.
I have checkde in the technical details it shows:
Exception             8987
Symbolic Name
Error Type            1
Area                  SWP
Message               88
Variable 1            0000000013
Variable 2            000000
Variable 3
Variable 4
Message Row           Error when processing node '0000000013' (ParForEach index 000000)
How can this error be removed? Am I missing out on any customising......
Regards
Vinay

I am getting an error in the start event itself. In the log it shows that the start event has been triggered but the status is 'ERROR'. In the next activity i will be executing a method of my custom class to fetch some data but in the workflow graphical log it shows the workflow is stuck in the fetch activity step & the status of the start event is ERROR.
The error that I have mentioned above are displayed in the technical details of workflow log.

Similar Messages

StartJAVA was executed with status ERROR

Hi People.
I am installing SAP Netweaver 7.0 SR3 AS JAVA, in Linux RH5 with Oracle 10 and JAVA 1.4.2 IBM.
The problem in the installation is when I tried to install the CI. The installation fail when tried to start de JAVA VM.
The LOG DEV_DISPATCHER is:
[Thr 1123465536] Wed Nov 11 12:08:32 2009
[Thr 1123465536] JLaunchISetState: change state from [Starting (2)] to [Stopped (6)]
</verbosegc>
[Thr 1111980352] JLaunchIExitJava: exit hook is called (rc = 0)
[Thr 1111980352] SigISetIgnoreAction : SIG_IGN for signal 17
[Thr 1111980352] JLaunchCloseProgram: good bye (exitcode = 0)
DEV_SERVER0:
JHVM_BuildArgumentList: main method arguments of node [server0]
[Thr 1081338176] Wed Nov 11 12:08:30 2009
[Thr 1081338176] JLaunchRequestFunc: receive command:17, argument:0 from pid:30225
[Thr 1081338176] JLaunchIShutdownInvoke: set shutdown interval (stop:1257952110/end:1257952230/TO:120)
[Thr 1081338176] JLaunchProcessCommand: Invoke VM Shutdown
[Thr 1081338176] JHVM_FrameworkShutdownDirect: invoke direct shutdown
</verbosegc>
[Thr 1108367680] JLaunchIExitJava: exit hook is called (rc = 999)
[Thr 1108367680] **********************************************************************
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 943602 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.
[Thr 1108367680] SigISetIgnoreAction : SIG_IGN for signal 17
[Thr 1108367680] JLaunchCloseProgram: good bye (exitcode = 999)
And the log of Installation is:
TRACE      2009-11-11 12:08:12.823 [syuxctask.cpp:1382]
           CSyTaskImpl::start(bool)
A child process has been started. Pid = 4037
ERROR      2009-11-11 12:08:13.873 [sixxcstepexecute.cpp:951]
FCO-00011 The step startJava with step key |NW_Java_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|12|0|NW_CI_Instance_StartJava|ind|ind|ind|ind|5|0|startJava was executed with status ERROR .
Somebody Help me?
Thanks...

Hi.
The sapinst.log is:
INFO 2009-11-11 17:29:49.025
State of instance EPP/JC01 changed from Java: (dispatcher: STARTING, server0: STARTING) to Java: (dispatcher: STARTING, server0: STARTING).
ERROR 2009-11-11 17:29:49.027
CJS-30153 Java process dispatcher of instance EPP/JC01 reached state UNKNOWN after having state STARTING. Giving up.
ERROR 2009-11-11 17:29:49.755
FCO-00011 The step startJava with step key |NW_Java_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|12|0|NW_CI_Instance_StartJava|ind|ind|ind|ind|5|0|startJava was executed with status ERROR ( Last error reported by the step :Java process dispatcher of instance EPP/JC01 reached state UNKNOWN after having state STARTING. Giving up.).
Tha sapinst_dev.log is:
TRACE      2009-11-11 17:29:49.027
Function setMessageIdOfExceptionMessage: nw.progress.startupProcessFailed
ERROR      2009-11-11 17:29:49.027
           CJSlibModule::writeError_impl()
CJS-30153 Java process dispatcher of instance EPP/JC01 reached state UNKNOWN after having state STARTING. Giving up.
TRACE      2009-11-11 17:29:49.28 [iaxxejsbas.hpp:483]
           EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
TRACE      2009-11-11 17:29:49.142 [syuxctask.cpp:1382]
           CSyTaskImpl::start(bool)
A child process has been started. Pid = 25736
TRACE      2009-11-11 17:29:49.265 [syuxctask.cpp:1382]
           CSyTaskImpl::start(bool)
A child process has been started. Pid = 25737
ERROR      2009-11-11 17:29:49.755 [sixxcstepexecute.cpp:951]
FCO-00011 The step startJava with step key |NW_Java_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|12|0|NW_CI_Instance_StartJava|ind|ind|ind|ind|5|0|startJava was executed with status ERROR ( Last error reported by the step :Java process dispatcher of instance EPP/JC01 reached state UNKNOWN after having state STARTING. Giving up.).
TRACE      2009-11-11 17:29:49.767 [iaxxgenimp.cpp:752]
            CGuiEngineImp::showMessageBox
TRACE      2009-11-11 17:29:49.767 [iaxxgenimp.cpp:1255]
           CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
The others logs are attached in the first Post.
The phase of the error is in StartUP Java VM, before of the installation of Java Components.
Thanks a lot.
Edited by: Esteban Gutierrez E. on Nov 12, 2009 1:38 PM

Adalnctl failed to start with status 127

OS:red hat as4
ebs: 11.5.9
now my system can be started,but the adalnctl failed to start with status 127.
the error message is about lsnrctl which saied that lsnrctl: command not found.
but when i start the lsnrctl with oracle owner,the lsnrctl was started immediately.
however,i found that,the lsnrctl was conected to the port 1521,the adalnctl to the port 1626.
please help me to see it!
the cdalnctl log was this:
LSNRCTL for Linux: Version 9.2.0.3.0 - Production on 20-MAY-2009 17:03:27
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=ebstest)(Port=1626))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 111: Connection refused
Starting listener process APPS_PROD.
LSNRCTL for Linux: Version 9.2.0.3.0 - Production on 20-MAY-2009 17:03:27
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Starting /u01/oradata/prodora/8.0.6/bin/tnslsnr: please wait...
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
Linux Error: 2: No such file or directory
adalnctl.sh: exiting with status 1
Checking status for listener process APPS_PROD.
adalnctl.sh: exiting with status 1
./adalnctl.sh: line 126: lsnrctl: command not found
Starting listener process APPS_PROD.
./adalnctl.sh: line 137: lsnrctl: command not found
adalnctl.sh: exiting with status 127
Checking status for listener process APPS_PROD.
adalnctl.sh: exiting with status 1

oh maybe i found it
i have more than one listener.ora
[root@ebstest /]# find -name listener.ora
./u01/oradata/prodora/iAS/hs/admin/listener.ora
./u01/oradata/prodora/iAS/network/admin/samples/listener.ora
./u01/oradata/prodora/8.0.6/network/admin/samples/listener.ora
./u01/oradata/prodora/8.0.6/network/admin/PROD_ebstest/listener.ora
./u01/oradata/proddb/9.2.0/network/admin/samples/listener.ora
./u01/oradata/proddb/9.2.0/network/admin/PROD_ebstest/listener.ora
./u01/oradata/proddb/9.2.0/appsutil/out/PROD_ebstest/01010106/listener.ora
./u01/oradata/proddb/9.2.0/appsutil/out/PROD_ebstest/01010108/listener.ora
./u01/oradata/proddb/9.2.0/appsutil/out/PROD_ebstest/01010121/listener.ora
and the other listener.ora was about port 1626
[root@ebstest /]# cat ./u01/oradata/prodora/8.0.6/network/admin/PROD_ebstest/listener.ora
# $Header: admk80ln_ux.sql 115.13 2003/04/03 08:05:06 skghosh noship $
# LISTENER.ORA For Oracle Applications
# This file is automatically generated
APPS_PROD =
(ADDRESS_LIST =
(ADDRESS= (PROTOCOL= TCP)(Host= ebstest)(Port= 1626))
SID_LIST_APPS_PROD =
(SID_LIST =
( SID_DESC = ( SID_NAME = FNDSM_PROD )
( ORACLE_HOME = /u01/oradata/prodora/8.0.6 )
( PROGRAM = /u01/oradata/prodappl/fnd/11.5.0/bin/FNDSM )
( envs='MYAPPSORA=/u01/oradata/prodappl/APPSPROD_ebstest.env,PATH=/usr/bin:/usr/ccs/bin:/bin,FNDSM_SCRIPT=/u01/oradata/prodcomn/admin/scripts/PROD_ebstest/gsmstart.sh' )
( SID_DESC = ( SID_NAME = FNDFS )
( ORACLE_HOME = /u01/oradata/prodora/8.0.6 )
( PROGRAM = /u01/oradata/prodappl/fnd/11.5.0/bin/FNDFS )
( envs='EPC_DISABLED=TRUE,NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1,LD_LIBRARY_PATH=/usr/dt/lib:/usr/openwin/lib:/u01/oradata/prodora/8.0.6/lib,SHLIB_PATH=/usr/lib:/usr/dt/lib:/usr/openwin/lib:/u01/oradata/prodora/8.0.6/lib,LIBPATH=/usr/dt/lib:/usr/openwin/lib:/u01/oradata/prodora/8.0.6/lib,APPLFSTT=PROD,APPLFSWD=/u01/oradata/prodappl/admin' )
STARTUP_WAIT_TIME_APPS_PROD = 0
CONNECT_TIMEOUT_APPS_PROD = 10
TRACE_LEVEL_APPS_PROD = OFF
LOG_DIRECTORY_APPS_PROD = /u01/oradata/prodora/8.0.6/network/admin
LOG_FILE_APPS_PROD = APPS_PROD
TRACE_DIRECTORY_APPS_PROD = /u01/oradata/prodora/8.0.6/network/admin
TRACE_FILE_APPS_PROD = APPS_PROD

ImportJavaDump was executed with status ERROR .

Hi
I am installing SAP Netweaver 2004s on AIX with MAXDB.
To generate solution manager key , I started installation of Solution Manager 4.0 on AIX.
I am getting error log as below:
ERROR 2007-03-03 13:37:04
FCO-00011 The step importJavaDump with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Jload|ind|ind|ind|ind|9|0|importJavaDump was executed with status ERROR .
Please help.

Hi
This is more a JVM problem.
You should download the appropriate JDK (from Sun site) required for your hardware.. and retry after updating the $PATH variable...
Check the SAP note
Note 941595 - Download J2SE 1.4.2 for the x64 platform
Hope this helps
Cheers
Senthil

Foxfire downloaded an up-date last night (10 20/2010) at 5:30 PM EDST and it crashed the compter on re-start with an error message... Missing or Corrupt File ... WINNT\system32\config\SYSTEM

Foxfire downloaded an up-date last night (10/20/2010) at 5:30 PM EDST when I started Firefox, and it crashed the compter on re-start with an error message... Missing or Corrupt File ... WINNT\system32\config\SYSTEM. This machine is Windows 2000 Professional on Dell computer and Foxfire 3.6 or 4 not sure computer is stuck at the error message.

Hi there,
You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
Thanks, let me know if the update helps,
Nathan

The boot camp manager keeps quitting after re-start with an error message, why? I've installed the latest updates for XP 32bit

The boot camp manager keeps quitting after re-starts with an error message, why? I've installed the latest updates for XP 32bit

Alveto wrote:
The boot camp manager keeps quitting after re-starts with an error message, why? I've installed the latest updates for XP 32bit
Are we supposed to guess what the error message is?

HT5639 windows 7 starts with an error report

hi,can anyone help me to get windows back on to my imac.,i have a problem with uploading windows,it starts with an error report saying there is a problem
and gives me two options the 1st it tries to repair the problem and then tells me it cant repair it and when i click finish it closes down,the 2nd option
is start windows normally but when i scroll down to this option nothing happens.i used to have parallels but got so frustrated at this doing nothing i removed it
from my imac,but that did not help,can anybody help.
thanks

Hi Paul,
You don'y say what version of WMP you currently have, but I would strongly recommend installing the latest version from the Microsoft web site. It is possible that your current version has become corrupted in some way.
HTH

System Refresh SAPINST.exe error ExeProcs was executed with status Error

Hi Everyone,
                     As part of system refresh, our QA ECC is restored with Production Data backup. In this process, sapinst.exe is executed to perform homogeneous system copy steps. This process is being terminated with error at the step *"Create SAP stored procedures"*.
The error being displayed is as follows:
An error occurred while processing option SAP Toools for MS SQL Server > Database Copy Completion( Last error reported by the step: Errors when executing sql command: [Microsoft][ODBC SQL Server Driver][SQL Server]The specified @job_name ('SAP CCMS_qpe_QPE_Update_Tabstats') does not exist.
SOLUTION: If this message is displayed as a warning, you can ignore it. If this is an error, contact SAP support.
). You can now:
Choose Retry to repeat the current step.
Choose View Log to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/MSS/CPY.
sapinst.log file contains following information:
INFO 2010-11-06 17:40:30
Copied file 'C:/Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/DISTRIBUTED/AS-ABAP/DB/inifile.xml' to 'C:/Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/DISTRIBUTED/AS-ABAP/DB/inifile.4.xml'.
INFO 2010-11-06 17:40:30
Copied file 'C:/Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/DISTRIBUTED/AS-ABAP/DB/inifile.xml' to 'C:/Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/DISTRIBUTED/AS-ABAP/DB/inifile.5.xml'.
INFO 2010-11-06 17:40:31
Execute step
Component W2K_ServicePack_Check|ind|ind|ind|ind
Preprocess of component |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
INFO 2010-11-06 17:40:41
Copied file 'C:/Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/DISTRIBUTED/AS-ABAP/DB/keydb.xml' to 'C:/Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/DISTRIBUTED/AS-ABAP/DB/keydb.3.xml'.
INFO 2010-11-06 17:40:41
Execute step ExeProcs of component |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|8|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSysCopy|ind|ind|ind|ind|10|0|MssProcs|ind|ind|ind|ind|4|0.
ERROR 2010-11-06 17:40:58
FCO-00011 The step ExeProcs with step key |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|8|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSysCopy|ind|ind|ind|ind|10|0|MssProcs|ind|ind|ind|ind|4|0|ExeProcs was executed with status ERROR .
Our Environment details:
SAP Version : ECC6
OS                 : Microsoft windows server 2003
DB                 : Microsoft SQL Server         2005.
Can some please guide me in debugging this issue. Your help is highly appreciated.
Thanks a lot in advance.
Kind Regards,
Bharani.

Hi Satya,
             Thank you for the reply. QA in our landsacpe was in use since 2008. Serveral times system refresh is carried out on our QA with production data but never came accross this issue.
             Usually if the SAPINST.exe run is successfull, temperory licence will be installed and we will be allowed to login into the sytem with our user names normally and carry out post installation steps.
             As the SAPISNT.exe is being terminated, temperory license is not being installed and we got to work around by including parameter to allow default sap* userid and password to login and install license and carry on with the post installation steps. To be frank this issue is not really a show stopper, but there seems to be an issue that is to be resolved.
Thank you,
Kind Regards,
Bharani.

SMS starting with Status:

Nokia Suite and Nokia PC Suite won't show SMS correctly if line begins with Status:
I have a gadget that is controlled via SMS and the status messages I get from the gadget are not fully visible in Nokia Suite nor PC Suite. Any hints how to override this?
Status: ON/OFF *--- this line is not shown
Temp:**
Temp control: function ON/OFF
Schedule control: function ON/OFF
Delay control: function OFF
Another example:
Main electricity supply restore
Status: ON/OFF *--- this line is not shown
Temp:**
When I look at the message from phone, then is shows ok.

I am getting an error in the start event itself. In the log it shows that the start event has been triggered but the status is 'ERROR'. In the next activity i will be executing a method of my custom class to fetch some data but in the workflow graphical log it shows the workflow is stuck in the fetch activity step & the status of the start event is ERROR.
The error that I have mentioned above are displayed in the technical details of workflow log.

If I copy the "lcds" folder, Tomcat starts with socket errors

In the documentation it is said that when you create a new server-side application, you can start by copying the 'webapps/lcds' folder. I did that but then, Tomcat starts with some socket errors:
[LCDS]SocketServer 'my-rtmp-SocketServer' failed to pre-validate desired socket settings for BindSocketAddress: 0.0.0.0:2038
java.net.SocketException: Unrecognized Windows Sockets error: 0: JVM_Bind
[LCDS]SocketServer 'my-rtmp-SocketServer' failed to start.
flex.messaging.LocalizedException: SocketServer 'my-rtmp-SocketServer' cannot bind to accept client connections on port '2038' because another process has already bound the port. Please ensure that multiple endpoints across all applications are not configured to use this same port.
Am I doing something wrong?
Thanks,
Borek

What is happening is that you are getting a port conflict for the socket-based NIO and RTMP endpoints used in the channel definitions in the services-config.xml file of your new web app. The issue is that you have endpoints bound to the same port in the LCDS web and in your new web app.
You can deal with this one of two ways:
Option 1: In that services-config.xml file, search on "RTMP" and "NIO" to find the channel definitions and change the port numbers to something slightly different than the ones used in the LCDS web app.
Options 2: Move the LCDS web app out of the picture so it doesn't get loaded, and just use a template for future web apps. If you aren't using it for any of your development, there is really no reason you have to load it.
I'll add a note about this to the documentation that talks about using the LCDS web app as a template.

Updated to 6.0 and it starts with this error: Exc in ev handl: TypeError: brw is undefined

Just updated to 6.0 and now when I open it it starts with a popup box that says:Exc in ev handl: TypeError: brw is undefined. If I close it it opens a new window with the same popup box. I've tried to re download but the same thing happens. Any ideas?

# Switch back to default theme
# If you are using '''McAfee Site Advisor''', disable it.
# If you are not using '''McAfee Site Advisor''', disable all the extensions and try enabling one by one.

Workflow Event Trace:RFC Status : Error in target syst

Hi Gurus,
I am working on a custom workflow which is called in a loop from a transaction. There is a transaction which creates multiple documents. We need to start the workflow for each of them. This works fine for around 80-85 documents. For the remaining documents workflow does not start. I am trying with 200 documents.For the remaining documents event is triggered and in event trace, i see the information that receiver started correctly.But in RFC Status it displays as 'Error in Target System'. This is definitely due to system overload. Is there something that can be done for the same. Is this number configured somewhere like how many workflows can work in parallel.

Hello,
How do you know it's due to system overload?
200 workflows should be okay, but how quickly are they created? If it's all done within one second then yes, there could be a problem. You could stretch it out programmatically or you could use the queue, as Sue suggests.
regards
Rick Bakker
hanabi technology

Closing Limit type PO,with status "ERROR IN PROCESS" &conf indicator reset!

Hi all,
SRM 5.0 ECS
For a limit PO,can we change the A/c assignment data if there are nofollow on docs(No GR and INvoice) created??
Also we have a limit type PO,which is now error in process.We are trying to close the PO by checking on the indicators"No further confirmations expected " and "No further invoices expected " ,but when we do so,the indicator for confirmation becomes unchecked,the status of PO goes "error in Process" and in backend monitor I see the foll erros:
PO 3900000100: Instance 3900000100 of object type PurchaseOrder c ould not be changed
PurchOrder 3900000100: Purchase order still contains faulty items
PO 3900000100: In case of account assignment, please enter acc. a ssignment data for item
PurchOrder 3900000100: Transfer failed
Can someone tell me how do I close this PO now??

Hi
This may help you:
This is because of the workflow issue, you need the find the workitem ID in SWI1 and delte it using SWWL
with regards
Manjunath

Itunes wont start *with* microsoft error message

WHen i try to start itunes i get and error message that asks to send in error report, and when i click the technical info about the error it says that this file "f462_appcompat.txt" was included in the error.
Any ideas i have tried uninstalling both itunes and quicktime.

actually i get an Microsfot Visual C++ Runtime Library Error
Okay. Let's try swapping out that QuickTime one more time, taking a few additional explicit precautions this time.
Head into your Add/Remove programs. uninstall QuickTime.
Next, we’ll manually remove any leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx. (If you have "hide filename extensions for known file types" enabled on the PC, those files will appear as QuickTime and QuickTimeVR.)
7. Restart your computer.
next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

Program to cancel xml message with status error or schedule ?

Hi,
Any program that can cancel xml message base on period. because i have about 100 thousand unuse xml message that accidentaly generated. because it is too long if i need to cancel 1 by one.
Regards
Fernand

Hi All,
I already try this program below :
RSXMB_CANCEL_Message - cancel the meesage with errors.
RSXMB_CANCEL_NO_COMMIT_MSG -cancel the message processing for messages without commit.
RSXMB_CANCEL_NOT_REST_MESSAGES - Cancel Xi messages with errors that cannot be restarted
but then no result selected. i need to select manual those message and cancel using cancel button.
please advise.
Thank you and best regards
Fernand

Workflow is starting with status Error.

Similar Messages

Maybe you are looking for