Closing Limit type PO,with status "ERROR IN PROCESS" &conf indicator reset!

Hi all,
SRM 5.0 ECS
For a limit PO,can we change the A/c assignment data if there are nofollow on docs(No GR and INvoice) created??
Also we have a limit type PO,which is now error in process.We are trying to close the PO by checking on the indicators"No further confirmations expected " and  "No further invoices expected " ,but when we do so,the indicator for confirmation becomes unchecked,the status of PO goes "error in Process" and in backend monitor I see the foll erros:
PO 3900000100: Instance 3900000100 of object type PurchaseOrder c ould not be changed
PurchOrder 3900000100: Purchase order still contains faulty items
PO 3900000100: In case of account assignment, please enter acc. a ssignment data for item
PurchOrder 3900000100: Transfer failed     
Can someone tell me how do I close this PO now??

Hi
This may help you:
This is because of the workflow issue, you need the find the workitem ID in SWI1 and delte it using SWWL
with regards
Manjunath

Similar Messages

  • StartJAVA was executed with status ERROR

    Hi People.
    I am installing SAP Netweaver 7.0 SR3 AS JAVA, in Linux RH5 with Oracle 10 and JAVA 1.4.2 IBM.
    The problem in the installation is when I tried to install the CI. The installation fail when tried to start de JAVA VM.
    The LOG DEV_DISPATCHER is:
    [Thr 1123465536] Wed Nov 11 12:08:32 2009
    [Thr 1123465536] JLaunchISetState: change state from [Starting (2)] to [Stopped (6)]
    </verbosegc>
    [Thr 1111980352] JLaunchIExitJava: exit hook is called (rc = 0)
    [Thr 1111980352] SigISetIgnoreAction : SIG_IGN for signal 17
    [Thr 1111980352] JLaunchCloseProgram: good bye (exitcode = 0)
    DEV_SERVER0:
    JHVM_BuildArgumentList: main method arguments of node [server0]
    [Thr 1081338176] Wed Nov 11 12:08:30 2009
    [Thr 1081338176] JLaunchRequestFunc: receive command:17, argument:0 from pid:30225
    [Thr 1081338176] JLaunchIShutdownInvoke: set shutdown interval (stop:1257952110/end:1257952230/TO:120)
    [Thr 1081338176] JLaunchProcessCommand: Invoke VM Shutdown
    [Thr 1081338176] JHVM_FrameworkShutdownDirect: invoke direct shutdown
    </verbosegc>
    [Thr 1108367680] JLaunchIExitJava: exit hook is called (rc = 999)
    [Thr 1108367680] **********************************************************************
    ERROR => The Java VM terminated with a non-zero exit code.
    Please see SAP Note 943602 , section 'J2EE Engine exit codes'
    for additional information and trouble shooting.
    [Thr 1108367680] SigISetIgnoreAction : SIG_IGN for signal 17
    [Thr 1108367680] JLaunchCloseProgram: good bye (exitcode = 999)
    And the log of Installation is:
    TRACE      2009-11-11 12:08:12.823 [syuxctask.cpp:1382]
               CSyTaskImpl::start(bool)
    A child process has been started. Pid = 4037
    ERROR      2009-11-11 12:08:13.873 [sixxcstepexecute.cpp:951]
    FCO-00011  The step startJava with step key |NW_Java_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|12|0|NW_CI_Instance_StartJava|ind|ind|ind|ind|5|0|startJava was executed with status ERROR .
    Somebody Help me?
    Thanks...

    Hi.
    The sapinst.log is:
    INFO 2009-11-11 17:29:49.025
    State of instance EPP/JC01 changed from Java: (dispatcher: STARTING, server0: STARTING) to Java: (dispatcher: STARTING, server0: STARTING).
    ERROR 2009-11-11 17:29:49.027
    CJS-30153  Java process dispatcher of instance EPP/JC01 reached state UNKNOWN after having state STARTING. Giving up.
    ERROR 2009-11-11 17:29:49.755
    FCO-00011  The step startJava with step key |NW_Java_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|12|0|NW_CI_Instance_StartJava|ind|ind|ind|ind|5|0|startJava was executed with status ERROR ( Last error reported by the step :Java process dispatcher of instance EPP/JC01 reached state UNKNOWN after having state STARTING. Giving up.).
    Tha sapinst_dev.log is:
    TRACE      2009-11-11 17:29:49.027
    Function setMessageIdOfExceptionMessage: nw.progress.startupProcessFailed
    ERROR      2009-11-11 17:29:49.027
               CJSlibModule::writeError_impl()
    CJS-30153  Java process dispatcher of instance EPP/JC01 reached state UNKNOWN after having state STARTING. Giving up.
    TRACE      2009-11-11 17:29:49.28 [iaxxejsbas.hpp:483]
               EJS_Base::dispatchFunctionCall()
    JS Callback has thrown unknown exception. Rethrowing.
    TRACE      2009-11-11 17:29:49.142 [syuxctask.cpp:1382]
               CSyTaskImpl::start(bool)
    A child process has been started. Pid = 25736
    TRACE      2009-11-11 17:29:49.265 [syuxctask.cpp:1382]
               CSyTaskImpl::start(bool)
    A child process has been started. Pid = 25737
    ERROR      2009-11-11 17:29:49.755 [sixxcstepexecute.cpp:951]
    FCO-00011  The step startJava with step key |NW_Java_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|12|0|NW_CI_Instance_StartJava|ind|ind|ind|ind|5|0|startJava was executed with status ERROR ( Last error reported by the step :Java process dispatcher of instance EPP/JC01 reached state UNKNOWN after having state STARTING. Giving up.).
    TRACE      2009-11-11 17:29:49.767 [iaxxgenimp.cpp:752]
                CGuiEngineImp::showMessageBox
    TRACE      2009-11-11 17:29:49.767 [iaxxgenimp.cpp:1255]
               CGuiEngineImp::acceptAnswerForBlockingRequest
    Waiting for an answer from GUI
    The others logs are attached in the first Post.
    The phase of the error is in StartUP Java VM, before of the installation of Java Components.
    Thanks a lot.
    Edited by: Esteban Gutierrez E. on Nov 12, 2009 1:38 PM

  • Warning: Type created with compilation errors. sql : oracle 11gr2

    I'm trying to create a supertype customer service and subtype agent and supervisor, so they can inherent values however when I try to run this in oracle sql: a message comes up
    Warning: Type created with compilation errors.
    What is wrong with the code below?
    Create or replace type customer_s_type as object ( csID number, csName varchar(15), csType number ) NOT FINAL;  Create or replace type supervisor_type UNDER customer_s_type ( title varchar (10) );  Create or replace type agent_type UNDER customer_s_type (title varchar (10));  Create table supervisor of supervisor_type ( CONSTRAINT supervisor_PK PRIMARY KEY (csID));  Create table agent of agent_type (CONSTRAINT agent_PK PRIMARY KEY (csID));  create table customer_service( csID number(10), csType number(10), constraint supervisor_pk primary key(csID) );

    Wile creating TYPE you need to terminate with a back slash (/) semi colon does not work.
    Try like this
    create or replace type customer_s_type as object ( csid number, csname varchar(15), cstype number ) not final
    create or replace type supervisor_type under customer_s_type ( title varchar (10) )
    create or replace type agent_type under customer_s_type (title varchar (10))

  • System Refresh SAPINST.exe error ExeProcs was executed with status Error

    Hi Everyone,
                         As part of system refresh, our QA ECC is restored with Production Data backup. In this process, sapinst.exe is executed to perform homogeneous system copy steps. This process is being terminated with error at the step *"Create SAP stored procedures"*.
    The error being displayed is as follows:
    An error occurred while processing option SAP Toools for MS SQL Server > Database Copy Completion( Last error reported by the step: Errors when executing sql command: [Microsoft][ODBC SQL Server Driver][SQL Server]The specified @job_name ('SAP CCMS_qpe_QPE_Update_Tabstats') does not exist.
    SOLUTION: If this message is displayed as a warning, you can ignore it. If this is an error, contact SAP support.
    ). You can now:
    Choose Retry to repeat the current step.
    Choose View Log to get more information about the error.
    Stop the option and continue with it later.
    Log files are written to C:\Program Files/sapinst_instdir/MSS/CPY.
    sapinst.log file contains following information:
    INFO 2010-11-06 17:40:30
    Copied file 'C:/Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/DISTRIBUTED/AS-ABAP/DB/inifile.xml' to 'C:/Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/DISTRIBUTED/AS-ABAP/DB/inifile.4.xml'.
    INFO 2010-11-06 17:40:30
    Copied file 'C:/Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/DISTRIBUTED/AS-ABAP/DB/inifile.xml' to 'C:/Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/DISTRIBUTED/AS-ABAP/DB/inifile.5.xml'.
    INFO 2010-11-06 17:40:31
    Execute step
    Component  W2K_ServicePack_Check|ind|ind|ind|ind
    Preprocess  of component |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
    INFO 2010-11-06 17:40:41
    Copied file 'C:/Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/DISTRIBUTED/AS-ABAP/DB/keydb.xml' to 'C:/Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/DISTRIBUTED/AS-ABAP/DB/keydb.3.xml'.
    INFO 2010-11-06 17:40:41
    Execute step ExeProcs of component |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|8|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSysCopy|ind|ind|ind|ind|10|0|MssProcs|ind|ind|ind|ind|4|0.
    ERROR 2010-11-06 17:40:58
    FCO-00011  The step ExeProcs with step key |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|8|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSysCopy|ind|ind|ind|ind|10|0|MssProcs|ind|ind|ind|ind|4|0|ExeProcs was executed with status ERROR .
    Our Environment details:
    SAP Version : ECC6
    OS                 : Microsoft windows server 2003
    DB                 : Microsoft SQL Server         2005.
    Can some please guide me in debugging this issue. Your help is highly appreciated.
    Thanks a lot in advance.
    Kind Regards,
    Bharani.

    Hi Satya,
                 Thank you for the reply. QA in our landsacpe was in use since 2008. Serveral times system refresh is carried out on our QA with production data but never came accross this issue.
                 Usually if the SAPINST.exe run is successfull, temperory licence will be installed and we will be allowed to login into the sytem with our user names normally and carry out post installation steps.
                 As the SAPISNT.exe is being terminated, temperory license is not being installed and we got to work around by including parameter to allow default sap* userid and password to login and install license and carry on with the post installation steps. To be frank this issue is not really a show stopper, but there seems to be an issue that is to be resolved.
    Thank you,
    Kind Regards,
    Bharani.

  • ImportJavaDump was executed with status ERROR .

    Hi
    I am installing SAP Netweaver 2004s on AIX with MAXDB.
    To generate solution manager key , I started installation of Solution Manager 4.0 on AIX.
    I am getting error log as below:
    ERROR 2007-03-03 13:37:04
    FCO-00011 The step importJavaDump with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Jload|ind|ind|ind|ind|9|0|importJavaDump was executed with status ERROR .
    Please help.

    Hi
    This is more a JVM problem.
    You should download the appropriate JDK (from Sun site) required for your hardware.. and retry after updating the $PATH variable...
    Check the SAP note
    Note 941595 - Download J2SE 1.4.2 for the x64 platform
    Hope this helps
    Cheers
    Senthil

  • Service entry sheet reversal document (Status: Error in process) List repor

    Hi,
    I have a requirement, to have or develop report which gives service entry sheet reversal documents (Status: Error in process),
    while investigation i found below options (not exactly meeting my requirement)
    1) Display and Process Confirmations Centrally >Document Category>reverse documents
    which giving all reversed document list (need only error list) and it is giving only my puchasign group list (need all purchasing group list)
    2) I can execute PPB_PD with BUS2203>status>I1019
    is there any way/possible option that i can execute a report of reversal service entry sheets which ststus :error in process"
    Thanks,
    Jai

    Hi Christian,
    Thanks for your reply.
    But this is what has happened. No the SES was not deleted in ECC before the confirmation was deleted in SRM. Our users don't have access to ECC T-codes.
    Also I have checked the time at which the cancellation was created and everything is in sync.
    How can i change the status of SES from 'Error in process' to 'posted in backend'?
    Please advise
    Thanks

  • SRM PO Status "Error in Process"

    Hi,
    SRM 3.0 Extended classic scenario
    EBP Purchase order goes in to Status "Error in process" after making some ammendments.
    Getting following error
    1) EEP\Business to Business Procurement(100)\...\Purchase Order\Backend application errors
    2)Business to Business Procurement(100) Purchase Order Backend application errors ACTIVE PurchOrder xxxxxxxxxx: Please specify a valid account assignment
    3) Business to Business Procurement(100) Purchase Order Backend application errors ACTIVE Purchase order xxxxxxxxx: Instance xxxxxxxxx of object type PurchaseOrder c ould not be changed
    Can you please suggest what are the setting i need to check, actuallly the changes is not reflecting in to backend.
    Thanks,
    Jairaj

    Hi,
    Thanks for reply,
    It is a service purchase order and changes made to them is delete and undelete  the service line items not updating in to back end,
    below is details fo error log.
    1) javascript:displayTools('bbpadm_poappli/!?PARAM1=CE5C79FAF918944F9F4F968D8CF25D9E&PARAM2=6500010389&PARAM3=Pleasespecifyavalidaccount+assignment&PARAM4=BBP_PD_PO_TRANSFER_EXEC&alert_ALSYSID=EEP&alert_MSEGNAME=SAP_CCMS_esccebp_EEP_00&alert_ALUNIQNUM=0002283846&alert_ALINDEX=0000001660&alert_ALERTDATE=20090206&alert_ALERTTIME=092614&alert_DUMMYALIGN=&alert_MESSAGE=PurchOrder 6500010389: Please specify a valid account assignment&CTR_URL=test1', 'tools')
    2.     javascript:displayTools('bbpadm_poappli/!?PARAM1=CE5C79FAF918944F9F4F968D8CF25D9E&PARAM2=6500010389&PARAM3=Instance6500010389ofobjecttypePurchaseOrderc&PARAM4=ouldnotbe+changed&alert_ALSYSID=EEP&alert_MSEGNAME=SAP_CCMS_esccebp_EEP_00&alert_ALUNIQNUM=0002283847&alert_ALINDEX=0000001659&alert_ALERTDATE=20090206&alert_ALERTTIME=092614&alert_DUMMYALIGN=&alert_MESSAGE=Purchase order 6500010389: Instance 6500010389 of object type PurchaseOrder c ould not be changed&CTR_URL=test1', 'tools')
    Please advice.
    Regards,
    jairaj

  • "No further invoices expected"  flag reset while closing Limit type PO

    Hi all,
    SRM 5.0 ECS.
    I am trying to close  Limit type PO which has all the follow on docs created by chcekcing the GR/IR indicators under Item data-->Statistics.But when I do so and re-order the PO,,the indicator "No further invoices expected " is reset and the PO status is error in process".
    How do close the above PO now???Can I do it programaticaly by settig the indcators??Please advise.

    Experts,
    Any advice.?

  • Closing the Production Order with status PCNF

    Hi Experts,
    May I kindly ask if I can close an order with status Partially confirmed? If not, how can I cancel the confirmation if I had already reversed the goods movement in the confirmation thereby flagging an error of a deficit in the material quantity during cancellation of the confirmation?
    I really need your help since I need to close the production orders with this case.
    Hoping so much for your replies.
    Many thanks in advance.
    Sincerely,
    Ria

    Ria,
    I am not so clear about the exact situation.
    When you say you have reversed the goods movement with MIGO, is it reversal of the documents posted with confirmation or the individual documents?
    You can only cancle the document with MIGO which are independent of the confirmation.
    The  documents which are with the confirmation can not be reversed in any case with MIGO.
    I suggets you go this way,
    1. Check why system is giving you error as 'Deficit......'. The one thing I suspect that you must have performed auto GR & moved out the stock of FG from that location.
    If it's so then bring back the stock to it's original location & cancel the confirmation.
    While cancelling the confirmation where you might have executed goods issue with backflush this error won't arise as the stock will be bring back to storage location form the order.
    Don't reverse the cancellation of the of the documents youhave performed with MIGO for independent material posting on the order. Keep it as it is.
    This way the cancellation of confirmation & material movement will be done & now cost on the order will be zero.
    You can assign the status CLSD as well as DLFL to the order.
    2. In case you find the above activities can not be carried out for some reason then give status TECO to the order.
    Sttle the order so that the cost on the order will be zero, then give status CLSD.
    As far as possible stick to solution no. 1 only.
    Go for solution no. 2 when you don't have any other option.
    Hope this helps you.
    SmanS

  • Workflow is starting with status Error.

    Hi All,
    I am trigerring my workflow from an custom event, my workflow is getting trigerred but the status is showing as ERROR. I have already checked SWEL to check event creation, even in event simulation i am able to see that my workflow has been trigerred.
    I have checkde in the technical details it shows:
    Exception             8987                                      
    Symbolic Name                                                   
    Error Type            1                                         
    Area                  SWP                                       
    Message               88                                        
    Variable 1            0000000013                                
    Variable 2            000000                                    
    Variable 3                                                      
    Variable 4                                                      
    Message Row           Error when processing node '0000000013' (ParForEach index 000000)
    How can this error be removed? Am I missing out on any customising......
    Regards
    Vinay

    I am getting  an error in the start event itself. In the log it shows that the start event has been triggered but the status is 'ERROR'. In the next activity i will be executing a method of my custom class to fetch some data but in the workflow graphical log it shows the workflow is stuck in the fetch activity step & the status of the start event is ERROR.
    The error that I have mentioned above are displayed in the technical details of workflow log.

  • PO Output is possible for SRM PO's in status Error in Process

    Hello All ,
    We have a requirement, where system should not process the PO output when the PO is in u201Cerror in transfer status u201C .
    While creating the PO -> If the SRM PO is in Error in Process status, output will be processed and its sent to vendor also.
    Since Error in Process status in business point of view consider as error free PO but fails to transfer the PO to back-end due to some technical or customization.
    While changing the PO -> if the SRM PO is in Error in Process, We can stop the process the output with the help of OSS Note 1324180 which has been already implemented.
    Can anybody tell me how can we achieve this . Any pointers. We have also tried with condition based output workflow start conditions also .but it couldnu2019t work .
    Thank you
    Bharathi

    Dear Expert,
    Please check in RZ20 what specific error is being shown and accordingly either error message can be changed to warning message or customization should be done so as to replicate the PO into backend.
    Thanks and Regards,
    Sathya Kumar.

  • PO status "ERROR in PROCESS" after confirmation

    Hello Experts,
    problem is :
    When i create Purchase order its successfuly gets replicated in the Backend as we are on ECS scenario.Now when i create Confirmation the confirmation is also successfully created in the backend system but PO status gets changed to "ERROR in PROCESS" . i check in RZ20 and error is : "Purchase order 2400002371: Transfer Failed; Resubmit" means Application error while updating purchase orders in the back-end system.
    I check my port settings and message type in partner profiles looks OK to me otherwise Confir mation will not cretae in the backend system but yes i can see its created and all my data is fine then why for all the Purchase order after creating confirmation status gets Change ?
    Thanks in advance
    Smriti

    Hi Smriti,
    Try executing the function module BBP_PD_PO_TRANSFER_EXEC_V2 using SE37 transaction by giving the header GUID of P.O.
    Please take the GUID from BBP_PD transaction by giving the P.O number as input and BUS2201 as transaction type.
    Please check the P.O status after executing the above function module.
    Is this happening for all P.Os once the confirmation is posted or for any specific P.Os (2 P.Os as mentioned by you).
    Let us know the outcome to help you further in resolving this issue.
    Regards,
    Teja

  • Status "ERROR IN PROCESS" for invoice

    Hi,
    we have an issue regarding invoice document.After posting the invoice document in SRM the status of the document should change, however the status of the invoice is error in process.
    Dont know why, we have maintained all the attriburtes in organizational plan, and in vendor group too.Can any one share or throw some light on this issue. We have created a SC with local material, PO, Confirmation, and invoice.Issue is only with invoice.Kindly share some knowledge to resolve this issue.
    Maximum points will be awarded.
    regards,
    IGA

    Hi,
    The invoice is created in SRM but it doesn't replicate, Have you checked the inbound IDOC in your backend (Tx we05)
    In the status segment you should see the error.
    I hope this help
    Best regards

  • SRM PO Changes Error Status - Error in Process (SRM 4.0 and ECC 5.0)

    Hi All,
    I created PO in SRM from Sourcing (Shopping Cart) and it is replicated to Back End (ECC 5.0). But I did not post GR or Invoice Verication with reference to PO.
    When I am trying to change PO in SRM (SRM Webbrowser - Processing PO) like Quantity, I am receiving the PO status as Error in Process.
    Please let me know do I need to configure anything for this issue or need to implement OSS Note/BADI.
    Thanks a lot in advance for helping me.
    Best Regards,
    Sudarsan

    got solution

  • How to clear status "Error in process"?

    Hi All,
    I need help to clear the status of my invoice in SRM. The invoice status is "error in process". We checked in backend and reprocessed the IDOC through WE19 instead of BD87 and the invoices are posted now in backend. But the status of the invoices still shows "error in process" in SRM. I do understand that we should not use WE19 and should have processed it through BD87.
    I checked in SRM and the enteries exists in BBP_DOCUMENT_TAB table for these invoices, just tried to run CLEAN_REQREQ_UP and BBP_GET_STATUS_2 but no help.
    Please help
    Thanks, Sachin

    please read all below
    An IDoc BBPIV is sent if an invoice is released in the BBP system.In the invoice the statuses I1022 "Release granted" and I1017 "In transfer" are set.In addition, for the background job (see below) an entry is written to table BBP_DOCUMENT_TAB.
    Unless I1017 is not set again to inactive, all previous operations are not allowed (in particular all changes to the invoice), that is, they are stopped by the program. The sending of the IDOC is checked by the background job CLEAN_REQREQ_UP. The report reads the BBP_DOCUMENT_TAB and makes a RFC (remote function call) per META_GOODSMVT_UPDATECHECK to check the posting of inbound IDocs.If the IDoc is posted successfully (status 53), the BBP invoice receives status I1018 "Transferred to backend".In addition, the entry is deleted in BBP_DOCUMENT_TAB.
    If the IDoc is posted incorrectly (status 51, no follow-on document), the status of the invoice is set to I1019 "Transfer failed".The entry in BBP_DOCUMENT_TAB remains as is, that is, the status of the IDOCs in the backend system is still checked by the background job.The sending of the IDOC is checked by the background job CLEAN_REQREQ_UP.If the IDoc has not (yet) arrived in the backend system, the entry also remains as is.
    Status I1018 allows to reverse the invoice in the future. In case of status I1019, a deletion is (again) possible.
    The following must be considered when processing an incorrect IDoc in the backend system:
    a) Further process the same IDoc (BD87), instead of copying and correct the IDoc with Transaction WE19 since in the latter case, the background job cannot find the (copied) IDoc and the invoice posted from that. In this case the BBP invoice would remain endlessly in status "incorrect", the entry in BBP_DOCUMENT_TAB would never be deleted and the background job would always make the RFC at every run.In addition the BBP invoice would never receive the status "paid" (see below).
    b) If the IDoc cannot be corrected or the error in the backend system cannot be solved, the IDoc remains in status "incorrect".In this case the BBP invoice should be deleted and the entry in BBP_DOCUMENT_TAB should be deleted manually or with a self-written report.
    Additional information: As of EBP Release 4.0 or after the implementation of Note 601470 or the import of the relevant Support Package, the entry in BBP_DOCUMENT_TAB is deleted by the program (during the deletion of the invoice). Then the manual deletion is no longer required.
    The following section does not correspondingly apply to the confirmation, but only applies to the invoice.
    Status I1020 "paid" is set in the invoice by using the second background job BBP_IV_UPDATE_PAYMENT_STATUS to check the payment status of the follow-on invoice in the FI backend system for all invoices from the selection area.This only occurs for BBP invoices with status I1018 "Transfer to backend". To read the FI documents, META_FI_DOCUMENT_READ_40B is used.

Maybe you are looking for