Workflow Manager Configuration - Certificate with Thumbprint does not have a private key

After following the video series on how to install and Configure Workflow Manager into SharePoint 2013 http://technet.microsoft.com/en-us/library/dn201724(v=office.15).aspx,
I get to the 'Configure Certificates' section in the Workflow Manager Configuration: I browse to our wildcard certificate and select it.
When I try to move to the next page of the configuration wizard, I get the following red error under the certificate:
Certificate with thumbprint LONG STRING does not have a private key.
I checked the properties of the certificate, and it says: You have a private key that corresponds to this certificate.
What am I missing??
Thank you.
macrel

Hi,
According to your post, my understanding is that you got error under the certificate.
Please make sure you configure the workflow manager correctly.
More information:
Install and configure workflow for SharePoint Server 2013
Installing and Configuring Workflow Manager 1.0
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Similar Messages

AZURE The specified certificate could not be found in the LocalMachine certificate store,or the certificate does not have a private key.

Hello,
I try to make a HV website in Azure. It took me hours to figure out how to make a HV certificate with my own password. But I figured it out. With the HV application manager I uploaded the certificate to the HV platform. This worked fine. Then I created a
c# project with also works well on my local machine.
This is the code I use in the web.config
<appSettings>
<add key="ApplicationId" value="24ee15be-1497-4719-ad70-d1223adbf021" />
<add key="ShellUrl" value="https://account.healthvault-ppe.co.uk/" />
<add key="HealthServiceUrl" value="https://platform.healthvault-ppe.com/platform/" />

<add key="NonProductionActionUrlRedirectOverride" value="Redirect.aspx" />

<add key="WCPage_ActionHome" value="default.aspx" />
<add key="WCPage_ActionAppAuthSuccess" value="default.aspx" />
<add key="WCPage_ActionSignOut" value="SignedOut.aspx" />
</appSettings>
Next step is to deploy the site to Azure. I was able to upload the certicate to Azure.
After deploy I get the following error:
System.Security.SecurityException: The specified certificate, CN=WildcatApp-24ee15be-1497-4719-ad70-d1223adbf021, could not be found
in the LocalMachine certificate store,or the certificate does not have a private key.
I checked the certificate on another server with a different key in the web.config
<add key="ApplicationCertificateFileName" value="c:\Zodos\website\WildcatApp-24ee15be-1497-4719-ad70-d1223adbf021.pfx"/>
This gives me this error:
Exception Details: System.Security.Cryptography.CryptographicException: The specified network password is
not correct.
So the procedure I followed definitely was not correct:
It works on my local machine
It doesn't work on another server or on Azure
I can see that the procedure I follow is not correct, but what am I doing wrong?
Wilfred

I am having the same problem. I see I have updates thru the Mac App Store but when I try and run the System updates in the Mac App Store it errors out. But I can update third party apps.
Have even tried going thru Terminal to check for software updates but still have same error claiming it can not find the hostname server.
Jefre

SChannel error- The SSL server credential's certificate does not have a private key information property attached to it.

We have a public SSL certificate that allows for Active Directory sync with LDAPS on port 636 with our email smart host. This was working fine and suddenly stopped working and we are now getting SChannel errors Event ID 36869. There were no changes made
to the Exchange server, the firewall or the DC which holds the certificate. I have run a new certreq from the DC and then re-keyed the public SSL certificate and re-installed 3 times but the error does not go away and AD Sync with the vendor
fails. When I run LDP.exe the connection on port 636 fails with "cannot open connection" and the system event log throws the S Channel event 36869 "The SSL server credential's certificate does
not have a private key information property attached to it" There is no software firewall set on the DC. When I run Certutil -VerifyStore MY it shows the current certificates as well as the revoked and expired certificates
correctly. Certificate 0 is the public cert and is listed with Server and Client authentication, the FQDN of the server is correct and "Certificate is Valid" is listed. The private cert is Certificate 1 and has server and client authentication, the
FQDN is correct, Private key is not exportable and it ends with Certificate is Valid. I do not see a point in re-keying the cert again until I figure out what the root of the problem is. I have read in some forums that the private cert should not be set to
expire after the public cert but that does not make a lot of sense when in a situation like this the private cert is of course newer than the public. In fact it is too early to renew the public cert. I have been troubleshooting this for a few days and at this
point I would have to drop my AD sync with the vendor to LDAP in order to add new users. I do not want to do that for obvious reasons and I do not want to have our spam filtering and email archive service running without Directory sync. Any help would be greatly
appreciated.

Hi,
Have you tried this?
How to assign a private key to a new certificate after you use the Certificates snap-in to delete the original certificate in Internet Information Services
http://support.microsoft.com/kb/889651
Best Regards,
Amy

Loans document error Document header does not have a reconciliation key

Hi All,
I am trying to post a loans document through EK25 and while saving the document following erros is coming
Formal error: Document header does not have a reconciliation key
Message no. >0037
Diagnosis
You tried to post a document but a reconciliation key is missing from the document header. Since mass processing does not apply here (where the reconciliation key is automatically created) you must enter a reconciliation key.
System Response
Error message. Processing is terminated.
Procedure
Contact your system administrator.
Procedure for System Administration
If the program error occurred in an
SAP standard program, enter a problem message
Own program, correct the program
Any input appreciated.
Thanks,
VR

Hi,
You need to assign the reconcilation group to the SAP user ID you are using to post the loan document.
The reconciliation group is required if user-specific reconciliation keys are to be proposed automatically.
The reconciliation group is freely selectable.
Go to the following path in IMG-
IMG->Financial Accounting->Contract Accounts Receivable and Payable->Basic Functions->Postings and Documents->Document-.Define Default Values->Maintain Rules for Reconciliation Key Default Values->Maintain Reconciliation Groups for Default Values
Maintain the SAP User ID that you are using along with a reconciliation group.
After, you maintained the user ID and saved it, try to post the loan document again.
Hope it helps..
Thanks,
Amlan

Error : Rowkey does not have any primary key attributes

Hello All,
I'm developing an ADF application which has a few ADF forms. The forms have VO's and some tables.
On running, I seem to be getting this error
<Error> <oracle.adfinternal.view.faces.model.binding.CurrencyRowKeySet> <BEA-000000> <ADFv: Rowkey does not have any primary key attributes. Rowkey: oracle.jbo.Key[], table: oracle.jbo.server.ViewObjectImpl@2ecf4f19.>
Where does the Rowkey have to be set? Is it in the VO?
Regards,
PP

Make sure that the VO's you use have at least one attribute selected as a key attribute. GO to View Object overview editor and select attributes tab, see whether there is at least one attribute marked as a key. If not select the most appropriate attribute from the list of fields and go to edit attribute dialog, tick the key attribute property.

Field MATNR does not have a foreign key; as a result no intervals are allow

Hello,
We are having ROH and FERT material , in that we were entered the wrong Item category group , we need to change the
Item category group through mass posting through MM17. we are getting below given error
"Field MATNR does not have a foreign key; as a result no intervals are allowed"
Message no. M&132
Diagnosis
You have either specified an interval such as from 1 to 10 or M* for a field, or you have left the field blank, corresponding to the interval *. However, since there is no foreign key for this field, the system cannot resolve the interval into valid single values.
Procedure
Enter only single values for this field.
We have checked the the structure MPGD_MASS in SE11, and here foreign key mark is tciked in "entry help/ check.
How to solve this error.
Regards
sapman man

how did you then proceed, on the selection screen:
did you just use the change tab or did you work as well or only at the create tab?
What did you enter in the selection?
(...because I just tried a mass change without specying a material number and do not get such message)

Getting ADFv: Rowkey does not have any primary key attributes

Hi
I am using 11.1.1.5.0 version of JDeveloper.
The ViewObject has DistaccountId,OperatingUnit,PricingCategoryId,PartyId as Primary Key and
the EntityObject also has DistaccountId,OperatingUnit,PricingCategoryId,PartyId as Primary Key
and my Table also has the same set of attributes(DistaccountId,OperatingUnit,PricingCategoryId,PartyId) as Primary Key .
I am getting the following error on Create,Update Operation -
"<CurrencyRowKeySet> <_computeCurrentRowKey> ADFv: Rowkey does not have any primary key attributes. Rowkey: oracle.jbo.Key[], table: oracle.jbo.server.ViewObjectImpl@6c41af."
Also,when i choose a row for Update operation,the pop-up that opens up holds the values for some other record.
Please suggest.

I'm not too sure but can you check if you have the following text in your page source ?
selectedRowKeys="#{bindings.<TreeBindingName>.collectionModel.selectedRow}"
selectionListener="#{bindings.<TreeBindingName>.collectionModel.makeCurrent}"

Problem configuring Adobe Forms: ADSUSER does not have access to method...

I hope all of you are doing well...
So here is a rundown on what is happening.
Enviroment:
Netweaver 7.0
ECC 6.0
Abap and Java stacks are installed on the same system.
Problem:
I am trying to configure Adobe Print forms and not Interactive forms. When I run the test: FP_PDF_TEST_00
I get the following error:
Error Code: 100.102
SOAP Runtime Exception: CSoapExceptionFault : SOAP fault found in SOAP document /User ADSUSER does not have access to method rpData./<ns1:com.sap.engine.services.ejb.exceptions.
When I run the rpData test from the J2EE server I get the following response:
HTTP/1.1 500 Internal Server Error
Connection: close
Server: SAP J2EE Engine/7.00
Content-Type: text/xml; charset=UTF-8
Date: Fri, 03 Oct 2008 15:56:51 GMT
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" ><SOAP-ENV:Body><SOAP-ENV:Fault><faultcode>SOAP-ENV:Client</faultcode><faultstring>User ADSUSER does not have access to method rpData.</faultstring><detail><ns1:com.sap.engine.services.ejb.exceptions.BaseEJBException xmlns:ns1='http://sap-j2ee-engine/client-runtime-error'>User ADSUSER does not have access to method rpData.</ns1:com.sap.engine.services.ejb.exceptions.BaseEJBException></detail></SOAP-ENV:Fault></SOAP-ENV:Body></SOAP-ENV:Envelope>
I would really appreciate all the help that I can get.
Thanks...

Thanks for the tip,
I had actually gone through the note before and tried out a couple of tips that were suggested in the note. I am still having the issue and believe that it might be due to the fact that I do not have a Credentials file installed.
I am applying for the credential and will see what happens.
thanks,
Saif

Why update with subqueries does not have cost and cardinality?

There is update.
update test t1 set dummy = (select dummy from test2 t2 where t1.id = t2.id);Both tables which have actual statistics. Each has 1000 rows. And column ID have values from 1 to 1000 in each table.
This is explain plan
| Id | Operation          | Name | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | UPDATE STATEMENT   |       | 1000 | 13000 |   426   (9)| 00:00:01 |
|   1 | UPDATE            | TEST |       |       |            |          |
|   2 |   TABLE ACCESS FULL| TEST | 1000 | 13000 |   426   (9)| 00:00:01 |
|* 3 |   TABLE ACCESS FULL| TEST2 |     1 |    13 |   426   (9)| 00:00:01 |
Predicate Information (identified by operation id):
   3 - filter("T2"."ID"=:B1)We can see here, that Oracle consider subquery within update as once-executed subquery.
This is runtime plan
| Id | Operation          | Name | Starts | E-Rows | A-Rows |
|   1 | UPDATE            | TEST |      1 |        |      0 |
|   2 |   TABLE ACCESS FULL| TEST |      1 |   1000 |   1000 |
|* 3 |   TABLE ACCESS FULL| TEST2 |   1000 |      1 |   1000 |
Predicate Information (identified by operation id):
   3 - filter("T2"."ID"=:B1)Why first plan does not have cost in step 1?
Does Oracle always not understand that update with subqueries will performed as NL or filter? In other words that step 3 will executed many times.
Or it is my bug (or what?)?

793769 wrote:
Does Oracle always not understand that update with subqueries will performed as NL or filter? In other words that step 3 will executed many times.
Or it is my bug (or what?)?It's not possible to say whether this is a bug or a deliberate choice.
Because of "subquery caching" (see http://jonathanlewis.wordpress.com/2006/11/06/filter-subqueries/ ) the optimizer cannot predict how often the subquery will have to run. So possibly it shows nothing rather than showing the best or worst cases or a pure guess.
Regards
Jonathan Lewis

HT6015 After successfully signing up for Apple's VPP, I went in to purchase apps, and the only distribution method available is "managed distribution". Our company does not have a MDM so I need the Redeemable Codes method. Where can I find once I log in

After successfully signing up for the Apple Volume Purchasing Program, I went in to purchase a quantity of apps. The only distribution method that was available was the MDM. Our company does not have a MDM. I need redeemable codes. How do I get that option? I am using a PC.

Can I add my existing, licensed apps to my list of 'Purchases' on the Mac App Store so I don't have to buy them twice?
No. Only apps purchased from the App Store can be re downloaded for free including updates.

Power Mac (MDD), New Apple keyboard does not have an Eject key

Newbie question...I picked up an Apple keyboard for an IMAC that does not have the open door key. Is there a combination of keys I can use to open the doors on my G4 MDD? My reqular keyboard, with the open door key, opens the doors fine.
Thanks in advance,
Frank
Message was edited by: frankmojz

Hi-
Welcome to Discussions!
Open System/Library/Core Services/Menu Extras. Double click on "Eject.menu", an icon will appear, and you can eject and close the drive from your menu bar.
If you hold the F12 key for 2-3 seconds, the drive tray door will also open and close.

Alert with Query does not have orange navigation / drill down arrows

Hi Experts!
My Alert which uses a Query doesn't allow me to drill down into the document (Sales Order) . The Query for this alert is:
SELECT T0.[DocNum], T0.[CardName], T0.[DocDueDate] 'Due Date', T2.[TrnspName], T0.[U_PostCode], T1.[SlpName] FROM ORDR T0 INNER JOIN OSLP T1 ON T0.SlpCode = T1.SlpCode INNER JOIN OSHP T2 ON T0.TrnspCode = T2.TrnspCode INNER JOIN RDR1 T3 ON T0.DocEntry = T3.DocEntry WHERE T0.[CANCELED] = 'n' and T1.[SlpCode] IN ('3', '4', '5', '6', '7', '8', '9', '17', '21', '29', '39') and T0.Address2 NOT LIKE '%'T0.U_Postcode'%' and T3.[LineStatus] = 'o' and T2.[TrnspName] Like '%%del%%' GROUP BY T0.[DocNum], T0.[CardName], T0.[DocDueDate] , T2.[TrnspName], T0.[U_PostCode], T1.[SlpName] for browse
Please can you help me on this?
Many thanks,
Caroline

Hi Caroline,
Try not to "group by" a query for alert with drill down.
Cheers

WebDynpro ABAP : Table with DropDownByKey does not have neat focus

Hi Experts,
I have a table, with one column of type dropdownbyKey, i need this so that i can display the DESCRIPTION rather than key. Issue is when i select a ROW in this table i see a special YELLOW BG COLOR on all columns except the column that has drop down by key it is first thing enduser points out as issue ???
Any help would attract points

>
ramkumarvalluru wrote:
> Hi Eureka,
>
> I am new to webdynpro abap area.Please provide me step by step procedure for working on Dropdown by key,Check boxes Radio buttons aand all UI elements.
>
> Please provide me.
First of all, please don't attach new questions to existing threads. Second asking for step by step procedures on all UI elements is really outside the scope of a forum posting and asking for too much. If you are that new to Web Dynpro ABAP, then start by reading the online documentation, the WDA WIKI section, and the WDA eLearnings.

Workflow Manager Configuration Wizard is not working with USER ID

Hello everyone,
I
have successfully installed Workflow Manager 1.0 (and its prerequisites) on my Server 2008 R2 SP1 machine that is hosting Sharepoint 2013. I attempt to go into the Workflow Manager Configuration. That comes up and asks me if I want to Create
new farm with Default Settings, New Farm with custom settings, or existing farm. I've tried both Default settings AND Custom settings.
            When
the configuration wizard comes up, I attempt to fill out the necessary information. It seems to connect to the SQL server without a problem. I only run into an issue when setting the USER ID. The program totally freezes up and force closes.
            I
have verified that the USERID is in the correct format and tried multiple different formats. The problem is that the moment I move the cursor from the USERID field to ANY other field, the program force closes. I'm not able to hit submit, I'm not
able to change any other options. The moment USERID is manipulated or the cursor LEAVES the USERID field, the program force closes. It won't even allow me to put in a password before it force closes.
             Customer
domain is running in Windows Server 2003 Enterprise Edittion SP2.
Any
ideas?
I have installed also cumulative update to avoid crash but still I am getting force to close workflow wizard. I have used users which are already added in administrator groups.
We are using 3 tier architecture for Sharepoint 2013.
Also we have made Alias of Domain controller. Eg:-Alias is "labs" for domain "xyz.ab.com".
And we are using labs\spadmin and labs\spservice for Workflow Manager Configuration 1.0
Is there any issue with Domain Alias "labs" as Workflow gives error "Specified RunAs account is invalid" or "Force close the application".
  I
have copied the errors from event viewer below:
APPLICATION
ERROR
Faulting
application name: Microsoft.Workflow.Deployment.ConfigWizard.exe, version: 1.0.20922.0, time stamp: 0x505e1b30
Faulting module name: KERNELBASE.dll, version: 6.1.7601.17965,
time stamp: 0x506dcae6
Exception code: 0xe0434352
Fault offset: 0x000000000000bccd
Faulting process id: 0x17f8
Faulting application start time: 0x01cddee198ece72e
Faulting application path: C:\Program Files\Workflow Manager\1.0\Microsoft.Workflow.Deployment.ConfigWizard.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: 22ab8b69-4ad5-11e2-af8f-005056965915
.NET
Runtime Error
Application: Microsoft.Workflow.Deployment.ConfigWizard.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.Runtime.InteropServices.COMException
Stack:
at System.DirectoryServices.AccountManagement.PrincipalContext.DoLDAPDirectoryInitNoContainer()
at System.DirectoryServices.AccountManagement.PrincipalContext.DoDomainInit()
at System.DirectoryServices.AccountManagement.PrincipalContext.Initialize()
at System.DirectoryServices.AccountManagement.PrincipalContext.get_QueryCtx()
at System.DirectoryServices.AccountManagement.Principal.FindByIdentityWithTypeHelper(System.DirectoryServices.AccountManagement.PrincipalContext, System.Type, System.Nullable`1<System.DirectoryServices.AccountManagement.IdentityType>, System.String,
System.DateTime)
at System.DirectoryServices.AccountManagement.UserPrincipal.FindByIdentity(System.DirectoryServices.AccountManagement.PrincipalContext, System.String)
at Microsoft.ServiceBus.Commands.Common.SecurityHelper.IsUserValid(System.DirectoryServices.AccountManagement.PrincipalContext, System.String)
at Microsoft.ServiceBus.Commands.Common.SecurityHelper.IsDomainUserValid(System.String, System.String)
at Microsoft.ServiceBus.Commands.Common.ValidateUserAttribute.Validate(System.String)
at Microsoft.Deployment.ConfigWizard.UICommon.AccountDetailsViewModel.ValidateDomainUser()
at Microsoft.Deployment.ConfigWizard.UICommon.AccountDetailsControl.UserIdTextBox_LostFocus(System.Object, System.Windows.RoutedEventArgs)
at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
at System.Windows.Controls.Primitives.TextBoxBase.OnLostFocus(System.Windows.RoutedEventArgs)
at System.Windows.UIElement.IsFocused_Changed(System.Windows.DependencyObject, System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.FrameworkElement.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.Controls.TextBox.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.NotifyPropertyChange(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.UpdateEffectiveValue(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata, System.Windows.EffectiveValueEntry, System.Windows.EffectiveValueEntry ByRef, Boolean, Boolean,
System.Windows.OperationType)
at System.Windows.DependencyObject.ClearValueCommon(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata)
at System.Windows.DependencyObject.ClearValue(System.Windows.DependencyPropertyKey)
at System.Windows.Input.FocusManager.OnFocusedElementChanged(System.Windows.DependencyObject, System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.FrameworkElement.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.NotifyPropertyChange(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.UpdateEffectiveValue(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata, System.Windows.EffectiveValueEntry, System.Windows.EffectiveValueEntry ByRef, Boolean, Boolean,
System.Windows.OperationType)
at System.Windows.DependencyObject.SetValueCommon(System.Windows.DependencyProperty, System.Object, System.Windows.PropertyMetadata, Boolean, Boolean, System.Windows.OperationType, Boolean)
at System.Windows.DependencyObject.SetValue(System.Windows.DependencyProperty, System.Object)
at System.Windows.FrameworkElement.OnGotKeyboardFocus(System.Object, System.Windows.Input.KeyboardFocusChangedEventArgs)
at System.Windows.RoutedEventArgs.InvokeHandler(System.Delegate, System.Object)
at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
at System.Windows.UIElement.RaiseTrustedEvent(System.Windows.RoutedEventArgs)
at System.Windows.Input.InputManager.ProcessStagingArea()
at System.Windows.Input.KeyboardDevice.ChangeFocus(System.Windows.DependencyObject, Int32)
at System.Windows.Input.KeyboardDevice.Focus(System.Windows.DependencyObject, Boolean, Boolean, Boolean)
at System.Windows.Input.KeyboardDevice.Focus(System.Windows.IInputElement)
at System.Windows.UIElement.Focus()
at System.Windows.Input.KeyboardNavigation.Navigate(System.Windows.DependencyObject, System.Windows.Input.TraversalRequest, System.Windows.Input.ModifierKeys, System.Windows.DependencyObject)
at System.Windows.Input.KeyboardNavigation.Navigate(System.Windows.DependencyObject, System.Windows.Input.Key, System.Windows.Input.ModifierKeys)
at System.Windows.Input.KeyboardNavigation.ProcessInput(System.Windows.Input.InputEventArgs)
at System.Windows.Input.InputManager.RaiseProcessInputEventHandlers(System.Windows.Input.ProcessInputEventHandler, System.Windows.Input.ProcessInputEventArgs)
at System.Windows.Input.InputManager.ProcessStagingArea()
at System.Windows.Input.InputManager.ProcessInput(System.Windows.Input.InputEventArgs)
at System.Windows.Interop.HwndKeyboardInputProvider.ReportInput(IntPtr, System.Windows.Input.InputMode, Int32, System.Windows.Input.RawKeyboardActions, Int32, Boolean, Boolean, Int32)
at System.Windows.Interop.HwndKeyboardInputProvider.ProcessKeyAction(System.Windows.Interop.MSG ByRef, Boolean ByRef)
at System.Windows.Interop.HwndSource.CriticalTranslateAccelerator(System.Windows.Interop.MSG ByRef, System.Windows.Input.ModifierKeys)
at System.Windows.Interop.HwndSource.OnPreprocessMessage(System.Object)
at System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32)
at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate)
at System.Windows.Threading.Dispatcher.LegacyInvokeImpl(System.Windows.Threading.DispatcherPriority, System.TimeSpan, System.Delegate, System.Object, Int32)
at System.Windows.Threading.Dispatcher.Invoke(System.Windows.Threading.DispatcherPriority, System.Delegate, System.Object)
at System.Windows.Interop.HwndSource.OnPreprocessMessageThunk(System.Windows.Interop.MSG ByRef, Boolean ByRef)
at System.Windows.Interop.ComponentDispatcherThread.RaiseThreadMessage(System.Windows.Interop.MSG ByRef)
at System.Windows.Threading.Dispatcher.TranslateAndDispatchMessage(System.Windows.Interop.MSG ByRef)
at System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame)
at System.Windows.Application.RunInternal(System.Windows.Window)
at System.Windows.Application.Run()
at Microsoft.Workflow.Deployment.ConfigWizard.App.Main()
Thanks
Hansraj Rathva

Check to ensure that the user you're running the wizard as has access to the Users and Computers folders in Active Directory. I had trouble with the "specified RunAs account is invalid" message, and when I granted the AD rights, I was able to proceed.
The issue would be that the user executing the wizard isn't able to query AD to look up the specified user. The RunAs account you're specifying is probably fine.

Workflow Manager 1.0 will install but NOT configure.

Hello everyone,
     I have successfully installed Workflow Manager 1.0 (and its prerequisites) on my Server 2008 R2 SP1 machine
that is hosting Sharepoint 2013. I attempt to go into the Workflow Manager Configuration. That comes up and asks me if I want to Create new farm with Default Settings, New Farm with custom settings, or existing farm. I've tried both Default
settings AND Custom settings.
    When the configuration wizard comes up, I attempt to fill out the necessary information. It seems to connect
to the SQL server without a problem. I only run into an issue when setting the USER ID. The program totally freezes up and force closes.
    I have verified that the USERID is in the correct format and tried multiple different formats. The problem
is that the moment I move the cursor from the USERID field to ANY other field, the program force closes. I'm not able to hit submit, I'm not able to change any other options. The moment USERID is manipulated or the cursor LEAVES the USERID field,
the program force closes. It won't even allow me to put in a password before it force closes.
     Customer domain is running in Windows Server 2003 Enterprise Edittion SP2.
Any ideas?
Thank you very much!
I have copied the errors from event viewer below:
APPLICATION ERROR
Faulting application name: Microsoft.Workflow.Deployment.ConfigWizard.exe, version: 1.0.20922.0, time stamp: 0x505e1b30
Faulting module name: KERNELBASE.dll, version: 6.1.7601.17965, time stamp: 0x506dcae6
Exception code: 0xe0434352
Fault offset: 0x000000000000bccd
Faulting process id: 0x17f8
Faulting application start time: 0x01cddee198ece72e
Faulting application path: C:\Program Files\Workflow Manager\1.0\Microsoft.Workflow.Deployment.ConfigWizard.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: 22ab8b69-4ad5-11e2-af8f-005056965915
.NET Runtime Error
Application: Microsoft.Workflow.Deployment.ConfigWizard.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.Runtime.InteropServices.COMException
Stack:
at System.DirectoryServices.AccountManagement.PrincipalContext.DoLDAPDirectoryInitNoContainer()
at System.DirectoryServices.AccountManagement.PrincipalContext.DoDomainInit()
at System.DirectoryServices.AccountManagement.PrincipalContext.Initialize()
at System.DirectoryServices.AccountManagement.PrincipalContext.get_QueryCtx()
at System.DirectoryServices.AccountManagement.Principal.FindByIdentityWithTypeHelper(System.DirectoryServices.AccountManagement.PrincipalContext, System.Type, System.Nullable`1<System.DirectoryServices.AccountManagement.IdentityType>, System.String,
System.DateTime)
at System.DirectoryServices.AccountManagement.UserPrincipal.FindByIdentity(System.DirectoryServices.AccountManagement.PrincipalContext, System.String)
at Microsoft.ServiceBus.Commands.Common.SecurityHelper.IsUserValid(System.DirectoryServices.AccountManagement.PrincipalContext, System.String)
at Microsoft.ServiceBus.Commands.Common.SecurityHelper.IsDomainUserValid(System.String, System.String)
at Microsoft.ServiceBus.Commands.Common.ValidateUserAttribute.Validate(System.String)
at Microsoft.Deployment.ConfigWizard.UICommon.AccountDetailsViewModel.ValidateDomainUser()
at Microsoft.Deployment.ConfigWizard.UICommon.AccountDetailsControl.UserIdTextBox_LostFocus(System.Object, System.Windows.RoutedEventArgs)
at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
at System.Windows.Controls.Primitives.TextBoxBase.OnLostFocus(System.Windows.RoutedEventArgs)
at System.Windows.UIElement.IsFocused_Changed(System.Windows.DependencyObject, System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.FrameworkElement.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.Controls.TextBox.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.NotifyPropertyChange(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.UpdateEffectiveValue(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata, System.Windows.EffectiveValueEntry, System.Windows.EffectiveValueEntry ByRef, Boolean, Boolean,
System.Windows.OperationType)
at System.Windows.DependencyObject.ClearValueCommon(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata)
at System.Windows.DependencyObject.ClearValue(System.Windows.DependencyPropertyKey)
at System.Windows.Input.FocusManager.OnFocusedElementChanged(System.Windows.DependencyObject, System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.FrameworkElement.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.NotifyPropertyChange(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.UpdateEffectiveValue(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata, System.Windows.EffectiveValueEntry, System.Windows.EffectiveValueEntry ByRef, Boolean, Boolean,
System.Windows.OperationType)
at System.Windows.DependencyObject.SetValueCommon(System.Windows.DependencyProperty, System.Object, System.Windows.PropertyMetadata, Boolean, Boolean, System.Windows.OperationType, Boolean)
at System.Windows.DependencyObject.SetValue(System.Windows.DependencyProperty, System.Object)
at System.Windows.FrameworkElement.OnGotKeyboardFocus(System.Object, System.Windows.Input.KeyboardFocusChangedEventArgs)
at System.Windows.RoutedEventArgs.InvokeHandler(System.Delegate, System.Object)
at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
at System.Windows.UIElement.RaiseTrustedEvent(System.Windows.RoutedEventArgs)
at System.Windows.Input.InputManager.ProcessStagingArea()
at System.Windows.Input.KeyboardDevice.ChangeFocus(System.Windows.DependencyObject, Int32)
at System.Windows.Input.KeyboardDevice.Focus(System.Windows.DependencyObject, Boolean, Boolean, Boolean)
at System.Windows.Input.KeyboardDevice.Focus(System.Windows.IInputElement)
at System.Windows.UIElement.Focus()
at System.Windows.Input.KeyboardNavigation.Navigate(System.Windows.DependencyObject, System.Windows.Input.TraversalRequest, System.Windows.Input.ModifierKeys, System.Windows.DependencyObject)
at System.Windows.Input.KeyboardNavigation.Navigate(System.Windows.DependencyObject, System.Windows.Input.Key, System.Windows.Input.ModifierKeys)
at System.Windows.Input.KeyboardNavigation.ProcessInput(System.Windows.Input.InputEventArgs)
at System.Windows.Input.InputManager.RaiseProcessInputEventHandlers(System.Windows.Input.ProcessInputEventHandler, System.Windows.Input.ProcessInputEventArgs)
at System.Windows.Input.InputManager.ProcessStagingArea()
at System.Windows.Input.InputManager.ProcessInput(System.Windows.Input.InputEventArgs)
at System.Windows.Interop.HwndKeyboardInputProvider.ReportInput(IntPtr, System.Windows.Input.InputMode, Int32, System.Windows.Input.RawKeyboardActions, Int32, Boolean, Boolean, Int32)
at System.Windows.Interop.HwndKeyboardInputProvider.ProcessKeyAction(System.Windows.Interop.MSG ByRef, Boolean ByRef)
at System.Windows.Interop.HwndSource.CriticalTranslateAccelerator(System.Windows.Interop.MSG ByRef, System.Windows.Input.ModifierKeys)
at System.Windows.Interop.HwndSource.OnPreprocessMessage(System.Object)
at System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32)
at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate)
at System.Windows.Threading.Dispatcher.LegacyInvokeImpl(System.Windows.Threading.DispatcherPriority, System.TimeSpan, System.Delegate, System.Object, Int32)
at System.Windows.Threading.Dispatcher.Invoke(System.Windows.Threading.DispatcherPriority, System.Delegate, System.Object)
at System.Windows.Interop.HwndSource.OnPreprocessMessageThunk(System.Windows.Interop.MSG ByRef, Boolean ByRef)
at System.Windows.Interop.ComponentDispatcherThread.RaiseThreadMessage(System.Windows.Interop.MSG ByRef)
at System.Windows.Threading.Dispatcher.TranslateAndDispatchMessage(System.Windows.Interop.MSG ByRef)
at System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame)
at System.Windows.Application.RunInternal(System.Windows.Window)
at System.Windows.Application.Run()
at Microsoft.Workflow.Deployment.ConfigWizard.App.Main()

Hi Scott,
Thank you very much.. Now I am able to run wizard.. but at the end of wizard step I am getting below error
[Info] [1/23/2014 5:48:47 PM]: Endpoint=sb://MSPAPPS.psu.edu.sa/WorkflowDefaultNamespace;StsEndpoint=https://MSPAPPS.psu.edu.sa:9355/WorkflowDefaultNamespace;RuntimePort=9354;ManagementPort=9355
[Info] [1/23/2014 5:48:47 PM]: Processing completed
[Verbose] [1/23/2014 5:48:47 PM]: Validating input and configuration parameters.
[Verbose] [1/23/2014 5:48:49 PM]: Installing auto-generated certificate.
[Progress] [1/23/2014 5:48:49 PM]: Installing auto-generated certificate.
[Verbose] [1/23/2014 5:48:51 PM]: Granting 'Log on as Service' privilege to the RunAs account.
[Progress] [1/23/2014 5:48:51 PM]: Granting 'Log on as Service' privilege to the RunAs account.
[Verbose] [1/23/2014 5:48:52 PM]: Workflow Manager configuration starting.
[Progress] [1/23/2014 5:48:52 PM]: Workflow Manager configuration starting.
[Verbose] [1/23/2014 5:48:55 PM]: Configuring Workflow Manager runtime settings.
[Progress] [1/23/2014 5:48:55 PM]: Configuring Workflow Manager runtime settings.
[Error] [1/23/2014 5:48:55 PM]: System.Management.Automation.CmdletInvocationException: The token provider was unable to provide a security token while accessing 'https://mspapps.psu.edu.sa:9355/WorkflowDefaultNamespace/$STS/Windows/'. Token provider returned
message: 'The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.'. ---> System.UnauthorizedAccessException: The token provider was unable to provide a security token while accessing 'https://mspapps.psu.edu.sa:9355/WorkflowDefaultNamespace/$STS/Windows/'.
Token provider returned message: 'The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.'. ---> System.IdentityModel.Tokens.SecurityTokenException: The token provider was unable to provide a security
token while accessing 'https://mspapps.psu.edu.sa:9355/WorkflowDefaultNamespace/$STS/Windows/'. Token provider returned message: 'The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.'. ---> System.Net.WebException:
The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation procedure.
at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest, Exception exception)
at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result)
at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size)
at System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size)
at System.Net.ConnectStream.WriteHeaders(Boolean async)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at Microsoft.ServiceBus.TokenProviderHelper.GetWindowsAccessTokenCore(IEnumerator`1 stsUris, Func`2 uriBuilder, String requestToken, TimeSpan timeout, DateTime& expiresIn)
--- End of inner exception stack trace ---
at Microsoft.ServiceBus.TokenProviderHelper.ThrowException(Uri requestUri, WebException exception)
at Microsoft.ServiceBus.TokenProviderHelper.GetWindowsAccessTokenCore(IEnumerator`1 stsUris, Func`2 uriBuilder, String requestToken, TimeSpan timeout, DateTime& expiresIn)
at Microsoft.ServiceBus.WindowsTokenProvider.OnBeginGetWebToken(String appliesTo, String action, TimeSpan timeout, AsyncCallback callback, Object state)
at Microsoft.ServiceBus.TokenProvider.GetWebTokenAsyncResult..ctor(TokenProvider tokenProvider, String appliesTo, String action, Boolean bypassCache, TimeSpan timeout, AsyncCallback callback, Object state)
at Microsoft.ServiceBus.TokenProvider.BeginGetWebToken(String appliesTo, String action, Boolean bypassCache, TimeSpan timeout, AsyncCallback callback, Object state)
at Microsoft.ServiceBus.TokenProviderUtility.GetMessagingWebToken(ITokenProvider tokenProvider, String appliesTo, String action, Boolean bypassCache, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at Microsoft.ServiceBus.TokenProviderUtility.GetMessagingWebToken(ITokenProvider tokenProvider, String appliesTo, String action, Boolean bypassCache, TimeSpan timeout)
at Microsoft.ServiceBus.Messaging.HttpWebRequestExtensions.AddAuthorizationHeader(HttpWebRequest request, ITokenProvider tokenProvider, Uri baseAddress, String action)
at Microsoft.ServiceBus.Messaging.ServiceBusResourceOperations.GetAsyncResult`1.<GetAsyncSteps>d__11.MoveNext()
at Microsoft.ServiceBus.Messaging.IteratorAsyncResult`1.EnumerateSteps(CurrentThreadType state)
at Microsoft.ServiceBus.Messaging.IteratorAsyncResult`1.Start()
Exception rethrown at [0]:
at Microsoft.ServiceBus.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
at Microsoft.ServiceBus.NamespaceManager.OnEndTopicExists(IAsyncResult result)
at Microsoft.ServiceBus.NamespaceManager.TopicExists(String path)
at Microsoft.Workflow.Deployment.Commands.WorkflowServiceConfigHelper.SetWFRuntimeSettings(String resourceDBConnectionString, String config)
at Microsoft.Workflow.Deployment.Commands.AddWFHost.CallWFRuntimeSettings(Service wfserviceInfo, String unencryptedResourceConnectionString)
--- End of inner exception stack trace ---
at System.Management.Automation.PowerShell.EndInvoke(IAsyncResult asyncResult)
at Microsoft.Workflow.Deployment.ConfigWizard.CommandletHelper.InvokePowershell(Command command, Action`3 updateProgress)
at Microsoft.Workflow.Deployment.ConfigWizard.ProgressPageViewModel.AddWFNode(FarmCreationModel model, Boolean isFirstCommand)

Workflow Manager Configuration - Certificate with Thumbprint does not have a private key

Similar Messages

Maybe you are looking for