Workflow not running in ep

Hi all,
I am using ecc6.0 which is integrated with r/3. now I am trying use the standard worflow WS12300111 for it. I configured the leave types in spro - personam management -ess - leave request, and specified the workflow number there. I have relations properly defined in the org structure. I tried to test the leave request through PTARQ - iits fine, its giving me the supervisor of an employee perfectly.
Now when the same employee applies leave in ESS, while applying, it is showing the supervisor's name correct. When I apply for the leave, the request goes nowhere. No mail to supervisor's inbox. and when I go back, in the employees leave calender its not even showing wheather the employee has applied for the leave.
In transaction PTARQ, now when i click on the button - send mails - in the log it shows nothing - as if no leave have been applied by anbody. When i try to see the recent posted requests - there is no entry there either.
What could be wrong???
Please suggest.
Thanks

Hello Ribhu,
Can you check the workflow log is SWIA txn for this workflow-WS12300111.
Let us know what is the error over there. Based on it, we can proceed.
Regards
<i><b>Raja Sekhar</b></i>

Similar Messages

Sync workflows not running

Hi all,
I'm currently upgrading a CRM 2011 installation to CRM 2013 and there's a couple of areas which are using REST EndPoint in JavaScript to grab data from parent records. I was looking forward to trying out real time workflows and I've written these and activated
them but nothing happens. I've been on a few web sites to check how they should be set up and they're as they should be but when I change the relevant field on the form, nothing appears to happen.
Should the update happen immediately or, like some traditional workflows, might it take a moment or two before starting - I'd have guessed, as they're called 'real time' workflows, they should update pretty quickly.
Is there anything else on the system that I have to set up?
Just in case anyone wants to know; I've left the 'run in background' check box empty, the trigger condition is a change to a single field on the form with 'after' selected, they are set to run as workflow owner who is a system admin and they're published.

Hi Jon,
A few clarifications please so we might be able to help you out. By "I change the relevant field", I am sure you mean update the field (so change it AND press Save) correct? Workflows trigger on the update of fields, not on change (JScript does
that for you).
A few more: Do these same workflows run asynchronously? And, are we sure it is not the logic implemented - For instance, does a simple Update Record workflow with no other steps fail to work as Sync but is successful Async? Is it possible some of this Javascript
is changing the value for this particular field and it might be conflicting with the workflows?
In response to your question, no, normally in order to set the Workflow as Sync the checkbox you mention has to be empty (Convert to Real-Time workflows - on top of the screen). And yes, Sync workflows would run pretty quickly after the update is performed.

ERROR: The Service Component Container is not running: Standalone Workflow

We're trying to get the java notification mailer established through the OEM 10g Application Server Control. But the mail agent listener servlet container (WFALSNRSVC), and the mailer service servlet container (WFMLRSVC) are not running. Because of that, I cannot get any other parts of the mail configuration running. Note, I can successfully complete getting through the 8 steps of the "Workflow Notification Mailer" configuration (e.g. IMAP and SMTP mail accounts work fine and are accessible from the Workflow application server). What's the trick to getting the servlet containers running?? All I find in Oracle documentation is that these must be running before you can do anything, but I don't find anything on troubleshooting when they are not running.
Thanks.

Hi,
I'm having the same problem as you did.
I've tried pushing the button Go in the Oracle Workflow Manager - Service Components.
And it showed
An error has occurred!
The Service Component Container is not running.
Should I uninstall my Oracle Workflow?
And install a new installation of Oracle Workflow?
What does it mean by the "wfinstall"?
Is it the Oracle Workflow Configuration Assistant? which I can access using the wfinstall.bat.
Or should I replay the Oracle Workflow Configuration Assistant (wfinstall.bat) and choose Upgrade option?
Or should I uninstall all of my Oracle installation and start installing from the beginning?
BTW, what if I don't use (or have) OID?
Is it required?
Any clue would be grateful.
Thanks.
Buntoro

Workflow mailer,The Service Component Container is not running.

Dear,
We ar on 11.5.10,
We make clone our pord instance and try to up work flow notification but when we do this system ever time raise an error "The Service Component Container is not running.".
any body idea.

Hi Keen,
Please check the workflow mailer log for any errors.
See if the below notes help you:
Workflow Mailer Goes Down Very Often Service Component Container is not Running. [ID 957884.1]
'Service Component Container is not Running' when Trying to Start Workflow Components [ID 733335.1]
Please also see link:
https://forums.oracle.com/thread/2258324
Hope this helps
Best Regards,

SPUCWORKERPROCESS.EXE is not running message when debugging workflow on Sharepoint 2013

When I launch my workflow from Visual studio 2013 I get an error saying "Unable to attach. SPUCWORKERPROCESS.EXE is not running".
I verified that "Microsoft SharePoint Foundation Sandboxed Code Service " is running in Central Administration"
I pass these commands from powershell:
$acl = Get-Acl HKLM:\System\CurrentControlSet\Control\ComputerName
$person = [System.Security.Principal.NTAccount]"Users"
$access = [System.Security.AccessControl.RegistryRights]::FullControl
$inheritance = [System.Security.AccessControl.InheritanceFlags]"ContainerInherit, ObjectInherit"
$propagation = [System.Security.AccessControl.PropagationFlags]::None
$type = [System.Security.AccessControl.AccessControlType]::Allow
$rule = New-Object System.Security.AccessControl.RegistryAccessRule($person, $access, $inheritance, $propagation, $type)
$acl.AddAccessRule($rule)
Set-Acl HKLM:\System\CurrentControlSet\Control\ComputerName $acl
And I run Visual Studio 2013 as Administrator.
Effectively when I look in Task Manager there is no SPUCWORKERPROCESS.EXE but a lot of SPUCWORKERPROCESSPROXY.EXE.
My environnement developpement is a single Windows Server 2012 R2 as Domain Controler with Sharepoint 2013 SP1 and February 2015 Cumulative Updates. Visual Studio 2013 Update 4.
Any idea

Hi,
Per my understanding, there is an issue when deploying a workflow solution from Visual Studio.
I suggest you check the ULS logs to collect more information for troubleshooting this issue.
About how to check the ULS logs:
http://blogs.technet.com/b/fesiro/archive/2013/11/11/sharepoint-logging-and-troubleshooting-using-ulsviewer.aspx
http://blogs.c5insight.com/Home/tabid/40/entryid/190/All-About-SharePoint-2010-ULS-Logging.aspx
Also, you can try creating an empty SharePoint project without extra customization for a test to see if the issue persists.
Thanks
Patrick Liang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

DAC Task are queued but not running

Hi Everybody,
Currently we are running the ETL for only Financials and there are 394 tasks in total out of which 285 have been completed successfully. At times some of the tasks would just get stuck on particular action. For e.g The analyze task after dimension population would remain in the queued status and would never switch to run mode. So we had to abort the ETL and restart it. This action resulted in successful completion of the previously queued task. Now for past two days the ETL is once again stuck (queued but not running).
For e.g The following task is showing status of running
51     SIL_InventoryProductDimension_SCDUpdate     Running     2009-03-02 21:09:59.0                    DataWarehouse     DataWarehouse     SILOS          Update Slowly Changing Dimension     Informatica     0     0     -2     CUST R11 5 10
But if I right click on the details
I get this
1     SIL_InventoryProductDimension_SCDUpdate_Full     Running     2009-03-02 17:40:41.0     2009-03-02 21:09:09.0     3 hour(s), 28 min(s), 28 sec(s)     Verifying if workflow still running on Informatica Server 'Oracle_BI_DW_Server'.
If still running will attach to the workflow.     DataWarehouse     Informatica     0          -2     0
And the remaining detail tasks for this are in queued status.
What could be the reason?
Does it need the Infomartica workflow manager open? It is open currently open but must have been accidently closed in between.
Informatica services have always been running.
Thank you very much
Nilesh
[excel dashboard|http://www.exceldashboard.org]
dashboard Software
[Access Dashboard|http://www.accessdashboards.com]
[Dashboard Reporting|http://www.reportingdashboard.com]
Edited by: njethwa on Jan 6, 2010 5:39 PM

Hi
This Sometime happens with DAC.We faced the same issue and had an SR open with Siebel for almost 2 weeks,they Couldnt help us out.
Restart your DAC Server and Do a Dryrun and then run your full ETL .
The Analyze task would not hang anymore.
I dot have any logical reason why this happens,but i am guessing it has to do with some java heap memory.So restarting the Server would free up the memory.(i am guessing but not sure).
But it Works.
Try it
Let me know if this helps
Thanks
H

Process flows are not running in OWB

I have a process flow which has a main process and this main process calls 3 subprocesses and 1 externel process. This workflow was running fine and it suddenly stopped working and when I try to run it from WF monitor it is giving the following error.
Activity CALWINDW_INC_LOAD_PF_WE
Result Exception
Error Name -20001
Error Message ORA-20001: Task CALWINDW_INC_DELETE_PF does not exist. Please check that the ProcessFlow has been deployed successfully. ORA-01403: no data found
Error Stack Wf_Engine_Util.Function_Call(WB_RT_WORKFLOW_UTIL.EXECUTE_TASK, CLWNPKG, 200509200915, 37461, RUN).
I tried running it from OWB deployment manager but it didn't work.
I have checked all the process flows and the mappings all are deployed and all the mappings are running sepreatly. I tried dropping and deploying the process flow again and it deployed successfully without any error. We have tried rebooting the server, creating new PF location and new process flows, but nothing worked out. Becuase of this issue we can't run the whole process. Any help will be appriciated please.

May be your chain was in the wait at the scheduled time, as there were no adequate processes available at the app server to take up your job.
Check with your Basis ( and also your users ); about the optimal time to schedule the job and reschedule your jobs.
Ravi Thothadri

SPD 2013 Workflow not working

Hello,
I'm running into a very interesting issue, we have a 2013 custom list that has some 2010 and 2013 workflows associated with it. Just until recently the workflows were working fine, but now only 2010 workflows are working.
I updated one of the 2013, tried to publish it but then I canceled the process of publishing it because I had to make a new update.... not sure if this flipped the switch on these but now even if I create new ones in SPD they will not run. Also if
I try to run in manually I get a message - "Something went wrong. To try again, reload the page and then start the workflow"(the option for start manually is enabled in SPD 2013). Any help on this will be greatly appreciated!

Hi Ghabib05,
According to your description, my understanding is that you got an error when you ran a SharePoint 2013 workflow.
Afer you made some change in your workflow, whether you re-published the workflow. if not, please publish it, then test again, compare the result.
Please create a new SharePoint 2013 workflow on the list, then test, compare the result.
If this issue only occurred on the specifical workflow, I suggest you create a new workflow instead of the problematic one.
If this issue occurred on all SharePoint 2013 workflow, you can try to re-register workflow service.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

SharePoint Online workflow not starting

Hi All,
I am an administrator for a company and I have been asked to create a workflow for them.
I created 2 workflows using SharePoint designer 2013. The 2010 workflow works as expected.
I created the 2013 workflow because I can use loops. However the 2013 workflow doesn't automatically start when an item is created. but works if I start it manually. I have checked and made sure that the check box is ticked for the workflow to start automatically.
The workflows go like this.
Step: Query Type
If Current Item:Query_Type equals Phone
  Set Status to Opportunity
Else
If Current Item:Query_Type equals Email
  Email Current Item:Sales_Rep2
  Pause for 0 days, 0 hours, 15 minutes
  If Current Item:Follow_Up equals No
   Email Current Item:Sales_Rep2
Step: Rental or Not
If Current Item:Rental equals Yes
  Email Current Item:Sales_Rep2
  Pause for 0 days, 1 hours, 0 minutes
  If Current Item:Quote_Sent equals No
   Email Current Item:Sales_Rep2
  Else
  If Current Item:Rental equals No
   Email Current Item:Sales_Rep2
   Pause until Current Item:Date to Send Quote
   Email Current Item:Sales_Rep2
And the 2013 one goes like this
Stage:Follow Up
Loop: Email to manager
  The contents of this loop will run repeatedly while: Current Item:Follow_Up equals No
   Pause for 0 days, 1 hours, 0 minutes
   If Current Item:Follow_Up equals No
    Email Current Item:Manager
If Current Item:Follow_Up equals Yes
  Set Status to Opportunity
Transition to stage
Go to Rental or Not
Stage:Rental or Not
Loop: Escalation
  The contents of this loop will run repeatedly while: Current Item:Quote_Sent equals No
   Pause for 2 days, 0 hours, 0 minutes
   If Current Item:Quote_Sent equals No
    Email Current Item:Manager
Loop: Escalation
  The contents of this loop will run repeatedly while: Current Item:Quote_Sent equals No
   Pause for 7 days, 0 hours, 0 minutes
   If Current Item:Quote_Sent equals No
   and Current Item:Date to Send Quote is greater than Current Item:Date to Send Quote
    Email Current Item:Manager
Transition to stage
Go to End of Workflow
If this makes sense? If not can anybody give me advice on how to get this working the way it is expected to work?

Hi,
From your description, After you modified the workflow and added "App Step" to it and "Pause" actions apart from few other modifications, you got the issue that
SharePoint 2013 Workflow not starting when a new item is crated.
Whether you got the issue Before you modified the workflow.
I have done a test in my SharePoint 2013 and it works fine.
I suggest you update SharePoint to the latest CU.
Here is an blog similar with your issue, you can use as a reference:
http://blogs.msdn.com/b/sridhara/archive/2014/08/19/fix-sharepoint-2013-workflow-recursion-prevention-part-1.aspx
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

Error Service Component Container for Java Mailer is not running

Hi,
I installed Oracle Workflow 2.6.3 (Standalone) in Oracle Database 10g Release 1.
Actually there was no problem during the installation.
I have done the Setting Up from step 1 to 8.
I'm going to do the step 9 (Implementing Notification Mailer).
The problem is the Workflow Agent Listener WFALSNRSVC is not running
and I cannot run it using the Oracle Workflow Manager.
In the Oracle Workflow Manager there was 4 rows which related to the Container : WFALSNRSVC
1. Workflow Deferred Agent Listener
2. Workflow Deferred Notification Agent Listener
3. Workflow Error Agent Listener
4. Workflow Inbound Notification Agent Listener
The status is : Stopped.
I cannot run any of them.
Although the Startup Mode is Automatic, but none of them is running.
When I tried to push the Go button to Actions: Start, it showed this message
An error has occured
The Service Component Container is not running.
And after I tried to configure the Workflow Notification Mailer using the wizard
I didn't receive any e-mail after I push the Test Send Mail button.
I read in another post in this forum.
It states that when going to the Workflow Configuration Assistant (WFCA)
we must give the right entry in the LDAP paramaters and Java Mailer parameters,
otherwise those WFALSNRSVC and WFMLRSVC would never run eventhough we enter them in a later time.
Actually I didn't provide the paramaters (both of them) since they are optional.
My questions are:
1. Is there another way to run those service (servlet)?
I really need the Java Notification Mailer to send email.
2. Should I uninstall and reinstall my Oracle Workflow and provide those paramaters?
Do I have to uninstall and reinstall the Oracle Workflow Middle Tier too?
3. Is it okay if I drop and cascade the OWF_MGR user (my Workflow Manager schema)
and then I use the Workflow Configuration Assistant again and choose Install option
to create the OWF_MGR schema?
3. Are the LDAP and OID required before we use the Java Notification Mailer?
Actually I didn't understand the use of LDAP and OID which required in the LDAP paramaters?
Any help would be grateful.
Thanks,
Buntoro

In the service components page click on any container, select stop all from the LOV and Go. Once all the containers Workflow Agent Listener Service,
Workflow Document Web Services Service and Workflow Mailer Service are Deactivated then StartAll. After all the containers are started then check the components status.
Still if they are running bounce the apache.

The Service Component Container is not running" eventhough they are running

Hi,
We are on 12.0.4 with hardware load balancer(cisco), and pcp has been configured between two Application nodes. The database is in the seperate node with OS Cluster.
I wanted to configure Workflow notification mailer. For that i have logedin through OAM workflow-->It is showing as
Nitification mailer -unavailable
Agent listener --     Down
Service component --     Down
Background Engine --     Down
Purge --           UP
Control queue cleanup -     Down
I have Navigate to Service component screen,
There all the Automatic component are showing status as stopped with error, I clicked the "workflow agent listener service" of container all the services are up and "state" is showing as "activated" Node it is showing as "Primary node of PCP"
But when you click on any "stopped with error" service to start, It is throughing " The Service Component Container is not running" when i click on "view log" it is not showing any message seems like hanging.
Before starting the Notification mailer configuration i wanted to rectify the above issue.
Can you pl help us out in rectify the same.
Thanks and Regards
Vasu

Check the log file from the server itself; it should be under ($APPLCSF/$APPLLOG/FNDCPGSC*.txt).

The Service Component Container is not running

Hi All
When I tried to start any of the services in the services components in the
OAM , I got the error 'The Service Component Container is not running'
I already did the required configuration steps required to integrate the
workflow mailer with Email
I am on WF.G
The error in the view_log is : FND_WEBFILE.GET_URL (CPID=0)
Any idea?
Thanks in advance

Have you verified that the concurrent manager Workflow Mailer Service is running. You can check this from the System Administrator -> Concurrent -> Manager -> Administer. You will have to make sure the Workflow Agent Listener Service is also running.
Then start the mailer and agent listener components.
If you still have trouble starting them up, following are the things to check out.
1. check out if the Concurrent Manager env set up is correct. $APPL_TOP/admin/adovars.env is the file that contains env variables such as AF_CLASSPATH. This needs to point to right Java libraries that contains aqapi, jmscommon etc.
2. The concurrent manager log files are written to $APPLCSF/$APPLLOG directory on the concurrent tier. The Service Component Container log files are named as FNDCPGSC9999.txt where the numeric part if the PID.
3. Please refer to metalink note 242941.1 for more information on setting up and troubleshooting the mailer.
Hope this helps.
Vijay

Document Library - Workflow not starting on copied Word Document

HELLO EVERYBODY!
Right, got a weird issue on a Document Library, where if the Document Library already contains a Word Document with a Title of 'Document 1' and i download the document, make a change and re-upload it. The document uploads as a new separate file but it retains
the same 'Document 1' title.
My problem is that for some reason SharePoint isn't seeing this newly uploaded document and therefore it is not running the workflow on it?
This really confuses me, as it will work with new documents, but it will not work if you download a Word document, change it and re-upload the document as a new version, the workflow will not start.
Any ideas are welcome.
Thanks,
Tucker

Hi Tucker,
According to your description, my understanding is that the workflow which was set to start when an item is created cannot start when uploading a copy of a document existing in the library.
I tested the same scenario per your post, and the workflow can start automatically.
As the workflow can start automatically when uploading a new document, it is not the issue with the workflow.
I recommend to verify the things below:
Did you upload the copy with a new name as a separate file or as a new version to the existing document to the library?
Test with a new library and a new document to narrow the issue scope.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Workflow not attached to a SharePoint item

Hi All,
After published a workflow (runs on item created and changed), workflow not attached to an item and error occurs, this is my workflow status:

Hi Sam,
Do you see any workflows attached at the corresponding list/library level?
Go to List/Library settings-->workflow settings and can see any workflows attached/added?
Please remember to mark this post/reply as answered & Vote helpful,if this solves/helps your problem.
s p kumar

KIMYONG: "Service Component Container Not Running" error 시 조치사항

KIMYONG: "Service Component Container Not Running" error 시 조치사항
Purpose
WF Agent Listener 를 구동하고자 할때 아래 error를 발생하며 멈추게 됩니다.
이를 조치하는 방법은
ERROR
CANNOT START 'WORKFLOW AGENT LISTENER - ERROR:
"THE SERVICE ERROR COMPONENT CONTAINER"
Solution
전체적인 절차는 아래와 같습니다.
1. apache 를 bounce 합니다.
2. Workflow Mailer Service를 시작합니다.
a. Workflow administrator Web Applications Responsibility
b. Workflow Manager
c. Click on Service Components icon
d. Click on the Workflow Mailer Service link (Container column)
e. Select Workflow Mailer Service
f. Select Start from the list of values (top)
g. Click on go.
h. Wait until the Workflow Mailer service is "Activated"
3. Workflow Agent listener Service 를 시작합니다.
a. Workflow administrator Web Applications Responsibility
b. Workflow Manager
c. Click on Service Components icon
d. Click on the Workflow Agent listener Service link (Container column)
e. Select Workflow Agent listener Service
f. Select Start from the list of values (top)
g. Click on go.
h. Wait until the Workflow Agent listener service is "Activated"
4. Workflow Mailer를 시작합니다.
a. Workflow administrator Web Applications Responsibility
b. Workflow Manager
c. Click on Notification Mailers icon
d. Select Workflow Notification Mailer
e. Select Start from the list of values (top)
g. Click on go.
h. Do the same for the workflow deferred agent listener
Reference
Note 559388.1

Hi,
I'm having the same problem as you did.
I've tried pushing the button Go in the Oracle Workflow Manager - Service Components.
And it showed
An error has occurred!
The Service Component Container is not running.
Should I uninstall my Oracle Workflow?
And install a new installation of Oracle Workflow?
What does it mean by the "wfinstall"?
Is it the Oracle Workflow Configuration Assistant? which I can access using the wfinstall.bat.
Or should I replay the Oracle Workflow Configuration Assistant (wfinstall.bat) and choose Upgrade option?
Or should I uninstall all of my Oracle installation and start installing from the beginning?
BTW, what if I don't use (or have) OID?
Is it required?
Any clue would be grateful.
Thanks.
Buntoro

Workflow not running in ep

Similar Messages

Maybe you are looking for