Workflow Owner Change

I have a workflow set up which is triggered by and owner change.
[<OwnerId>]<>PRE('<OwnerId>') - I think that part is correct, since it does, in fact, trigger other actions correctly.
Then I have an action to put that Owner's name into another field with this value: [<OwnerFullName>].
But that action puts the value of the old Owner rather than the new Owner. What am I doing to make that happen? And how can I have the new value put into that field?

I got some help from a Service Request to figure this out. To anyone who cares, I used a JoinFieldValue on the Owner field to get the new value.

Similar Messages

  • Reporting on SR Owner Change, Activity Due Date Change

    We have few Report Requirements around Audit Trail. We are looking for Reports where we could Track Service Request Owner change, SR Status Change, Activity Due Date Change etc. As we know, In CRMOD Analytics, we cannot report on Audit Trail or use the PRE() function. Can anybody suggest any other ways for reporting on the Changes where we could show each and every change made to these fields and not only the previous values.

    Lets Say you want to track status Change in SR. There are two ways of doing it.
    Option 1:
    Create a Long text field in SR page.
    Name it "Track Status Change". Do not Display the field to the users.
    Default the Field to Initial Status+","+Now().
    When the Status Changes, you need to append the field with "Current Status"+","+Now()+";"
    The Semi Colon is delimiter to show that this is the new status. This delimiter would be used in the report to seperate the status. You can achieve this using the reporting functionalities.
    The down side of this is that it can affect the performance of report since lot of Sting functionalities would be used for the tracking.
    Option 2
    Whenever the status changes, create a completed task. Populate the Subject of the task with the Status. Put a workflow/field validation so that no one edits the subject when the task is created automatically.
    You can run a report on the Task Created Date and Subject to get the Audit Trail.
    Let me know if this helps.
    Paul Swarnapandian.

  • Override by workflow owner : Workflow Error

    Hello,
    Can some one help to understand what does below workflow history means? I am using sap mdm 7.1 sp04.
    "Override by workflow owner"
    Questions :
    1) In which scenario this can happen?
    2) How to avoid this?
    3) What is the solution here to keep this workflow continue?

    Hi Priya
    The owner override status indicates that a workflow step (usually a Process step) was assigned to a user but was Assumed by the workflow owner. This behaviour allows the owner of the workflow to take control of any step in a workflow.
    You cannot change this behaviour or turn it off. What you can do is create a dedicated "workflow owner" login and assign it as the workflow ower in the workflows table. The password for this login should only be know by users who are trusted to take control of a workflow / step.
    The workflow did continue, but a particular step was taken control of and executed by the workflow owner.
    HTH,
    Mark

  • SAP data collection framework - owner change

    Hi,
    in the data collection framework there is an owner assigned to all data collectors. In general the owner is the SID system itself.
    If another system (i.e. solman) is connected to the system, the owner of the data collector changes to that system.
    The data collection does not work any longer and creates a lot of errors.
    I can change back the owner, but it changes immediately to the connected system.
    Why does the data collector not work with the "foreign" owner? And why does the owner change at all?
    Best regards
    Arne

    Dear Mr. Knoeller,
    Your SAP_BASIS SP and release would be helpful, both for SolMan and the managed system.
    Until then, could you please check the following notes and KBAs, in this order:
    1927012 - SYB: DBACockpit shows warnings about data collectors not
    being properly set up or having a different version
    1972114 - SYB: Error in DCF ownership transfer - should solve your issue in my opinion
    1712802 - SYB: Change ownership of Data Collection Framework /
    ATM
    1623182 - SYB: Authorization issues in DBACockpit
    In case this is a test system, if the mentioned notes do not offer you a propper resolution, I would also drop all the collectors (Framework Collecter would be the last one, of course) and reassign it to Solution Manager. This also depends on your NW release, SP and DBA Cockpit rellease.
    Relevant notes regarding DBA Cockpit version known by me:
    1757928 - SYB: DBA Cockpit Release Notes 7.02 SP11, 7.30 SP6, 7.31
    SP2
    1758182 - SYB: DBA Cockpit Release Notes 7.02 SP12, 7.30 SP8, 7.31
    SP5
    1758496 - SYB: DBA Cockpit Release Notes 7.02 SP13, 7.30 SP9, 7.31
    SP7
    1814258 - SYB: DBA Cockpit Release Notes 7.02 SP14, 7.30 SP10, 7.31
    SP9, 7.40 SP4
    Kind Regards,
    Ionut

  • Trigger workflow after change of control record(pa03)

    Hi Experts,
    Is it possible to trigger a workflow after change of the control record - transaction pa03?
    Thanks,
    Agata
    Edited by: Agata Nowak on Sep 14, 2009 12:43 PM

    Hi,
    Thanks for replay but:
    1. just so the event or action in PA03 , on which you want to trriger WF ,Before that with TCOde swels switch ON , then afer the action in SWEL , you wil find if any BO and event is there for that action . if so , then using this you can trriger you WF. if not
    I've already tried this and no event is triggered ;(.
    then
    2. you can go for user exit , badi or enhancement spots (verson ECC.6.0 above). in that using SWE_EVENT_CREATE creat the event to start yr WF.
    I've been already searching for BADI or user exit but I really can not find any user exit nor badi for this transaction (in fact it is SAPMP52X Program) ;-((
    Thanks,
    Agata

  • Oracle i Supplier Portal Workflows - Supplier Change Order Workflow

    Hi Friends,
    Oracle iSupplier Portal uses the following workflows:
    ■ Supplier Change Order Workflow
    ■ Update Capacity Workflow
    ■ Order Modifiers Workflow
    ■ Advance Shipment Notice (ASN) Workflow
    ■ Purchase Order Acknowledgement (handled by PO Approval Workflow)
    My problem is related to - 'Supplier Change Order workflow'
    I would like know is there are any changes in the work Flow - 'Supplier change order Work flow' in 11.5.10 to 11.5.8
    If yes,kindly list the changes.
    Thanks in advance!
    Thanks & Regards
    Dilip Nomula

    The best way to determine this would be to download the workflow into a wft file from 11.5.8 and 11.5.10 instances and run a simple Unix diff command on these two wft files. I do not believe you will find any documentation that will list differences at this level of detail.
    HTH
    Srini

  • Workflow: State change on given date

    Hi,
    another problem: the state of a workflow shall change, when the start
    time of an entry has reached. As there is no "on start time" but "after
    start time", I tried "0 minutes" or "0 days" - but the change won't
    happen. If I choose a start time in the past, the state is changed fine.
    Greetings
    Andreas

    OK; forget about this. Those who are able to read are always in
    advantage. I used a user with a wrong timezone! Where is the ton of
    ashes to be thrown over my head? :D
    On 07.06.2010 15:53, Andreas Ollenburg wrote:
    > Hi,
    >
    > another problem: the state of a workflow shall change, when the start
    > time of an entry has reached. As there is no "on start time" but "after
    > start time", I tried "0 minutes" or "0 days" - but the change won't
    > happen. If I choose a start time in the past, the state is changed fine.
    >
    > Greetings
    > Andreas

  • Raw device owners change after reboot the server

    The raw device owner change after reboot the server. i have to adjust it manually like
    chown oracle:oinstall /dev/raw/raw*
    any idea to make it permanent after bouncing the Server?
    MY OS is RHEL4 & Rdbms 10.2.0.1

    I got my answer .
    New to Linex. Need suggestions...
    How i can create new file ? like i want to create file oracle.permission
    should i use this command
    touch <filename> or any other command?
    second i want to put these entries raw device 3, 6,7,10,11 etc
    shoud it work ? like in the oracle.permission directory?
    # ASM
    raw/raw[3671011]:oracle:dba:0660

  • Can i rollback my workflow versions  changes in mm work flow?

    Dear All,
    Can i rollback my workflow versions  changes in mm work flow?
    Moosa

    Hi ,
    please refer to this blog for versioning -
    /people/sunil.ojha5/blog/2008/01/29/versions-of-a-workflow
    Thanks,
    sahiba

  • Why my workflow name changed?

    Hi All,
    Once I republished my workflow, my workflow name changed into "Workflow Status (1) ". Initially it was like "Workflow Status". What will be issue, how to fix this?
    Thanks in advance!

    Hi Sam,
    According to your description, my understanding is that the workflow name changed to Workflow Status(1) after re-publishing the workflow.
    I recommend to remove the Workflow Status(1) from SharePoint and then re-edit the workflow in SharePoint Designer, then publish it again to see if the issue still occurs.
    Please go to Workflow Settings of the list which the workflow associated with and then Click Remove a workflow.
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Workflow process changed to admin for all entities

    Hi, We are working in Hyperion 9.3.3. Today morning we saw that the current owners for all the entities are changed to admin for few commbinations of scenario and version members.
    We sneaked into the audit tables and we can see the changes in those table for all the planning units but inside the application, it is all admin.
    All the process workflow history is wiped off and all the names are replaced with admin. This has happened for all the entities for monthly cycles for all the previous and current year.
    Can anybody help me to resolve or help me with some pointers to look into the tables to get that resolved.
    Regards,
    CM

    Hi,
    We have not restarted the planning services, but checked in few tables namely "HSP_PLANNING_UNIT_LOGS"
    which shows the current owners ids set to 50001 which I believe is admin for all the possible combinations for the scenario and versions...
    It is a production application, we can get the schema backup which will have the original states and the owner Ids but how can we populate the
    existing tables to get the states back in the current application, rather than restoring all in a separate application...
    Regards,
    CM

  • Update Revenue rows to opportunities (Owner change)

    Hi,
    I want to change the owner of a list of opportunities and there associated product revenue rows.
    What is the best way to do this to make sure that the owner is always the same for the opportunity and the product row?
    I can use import to update the opportunity owner. But I can not find a way to do it for the product revenue rows. Please help??
    Thanks

    Hi, Thanks for your reply.
    Unfortunitly, I'm not able to create workflows due to my job role as key user I do not have the previlidges.
    The Guys that are able to create workflows say they are not able to do this.
    Is there anyway to do this via import?

  • How to trigger workflow from changes in Sales Order in CRM?

    Hi Experts,
    I want to trigger event at the time of saving the changes in sales order (TCODE- CRMD_ORDER).
    I have found one BO - BUS2000115 but it is getting triggered only after new creation of sales order.And there is no BO available when we change the sales order.For this reason I have created one customize event in BO(BUS2000115).
    Now my question is How should I link this customize event so that it will trigger after saving the changes ?
    I have seen SWEC transaction but was not able to find anything to link this customize event.
    Please help ....!!!
    Good response will be rewarded.
    Thanks
    Snehasish Das
    Edited by: Snehasish Das on Feb 14, 2008 2:31 PM

    In SWEC, actually you link the change document object to a Business object and its corresponding event , to which workflow should react to.
    If yo udo not find the entry then, yo unedd to create one with finding out the respective chage documnet object.
    Hope that helps.
    Regds,
    Akshay

  • Workflow to change item/file permissions using a people column on the List/Library?

    SharePoint 2013 Online.
    I have a Document library with users that can only add new items permission by default.
    There is a new people column in that library
    I presume I can manually change perimssions on one item/file to let a user have full control over that particular item.
    Can a workflow be added to so that the user in that people column get's full control to the item on edit or new events in the Workflow?
    Can all other individual users be removed with this permissions for that item from the events of the workflow?
    Thanks in Advance!
    ============================
    Thank You
    cyberpine.com

    Hi cyberpine,
    In SharePoint on-premise, there are some workflow actions used to modify list item permission from SharePoint Designer workflow, like Add List Item Permissions, Replace List Item permissions. And these actions are only available in
    Impersonation Step.
    I’m not sure if it is similar in SharePoint online, you may check this. If there is any further question, I would like suggest you to give a new thread on
    Office 365 forum.
    Thanks & Regards,
    Emir
    Emir Liu
    TechNet Community Support

  • Workflow to change file permission in SharePoint Online Document Library

    1.What are my options with SPD 2013 If I want to change a documents file permission in a workflow?
    2.Where does SPO host 2013 Workfows?
    3.If connecting to SPO Can I use Worklow Manager 1.0?
    4.Will I need to host my Workflow Manager workflows on server or Azure if running against o365/SPO?
    5.If I wish to create SPO 2013 workflows with Visual Studio 2012, what do I need and will I be limited to actions I see in SPD 2013?
    ============================
    Thank You
    cyberpine.com

    You can host this workflow as a SharePoint App in SharePoint Online or use SharePoint Designer to create this workflow as long as you use the app step. Managing the permissions can be done with a REST call.  The initiator of the workflow must have
    been granted the right to "Manage Permissions" and the app must have full control of the Site Collection.   We have done so for several of our clients.   I know you asked this question some time ago, but I thought the info might still be helpful.

Maybe you are looking for