Working time -? time sheet

hi
     iam scenario where i need to maintain TIMESHEET entry
     for the employees and  i am very new working on
      ESS->working time , i can see the leave request ,
     but i need  working time also with the leave request  there
     where i can perform time sheet entry.
      can any one help me out ?  with both  showing the
    link in the portal and also configuring the time sheet .
    please help me out ?

Hi kishore,
For Time sheets on ESS we use CATS .
In ESS Customizations only in Working Time there is an option called  Record Working Time.
You need to create a Data Entry Profile and assign the same to the Employee with your different requirements.
Regards
Vijay

Similar Messages

  • Is there an option to have the location of the file on each document? (ie. S:\Policies and Procedures\Work Day\Time Sheet.xlsx)

    Is there an option to have the location of the file on each document? (ie. S:\Policies and Procedures\Work Day\Time Sheet.xlsx)
    I am looking for an option that will allow this on each of our documents for an easy access. It may already have an option, I am just unaware of it. Any help would be greatly appreciated.

    For starters, can you tell us what software you are talking about? I can assume Adobe Reader but you use .xls in your example.
    If you are talking about Adobe Reader and pdf files, then unfortunately the answer is no. If something else, please be descriptive about the issue so we can guide you to the right place.

  • I have itunes directory on an external hard drive and want to direct a new installation of itunes on windows 8 to use it. I tried holding down ctrl and clicking itunes and after many tries got it to work one time. When I went back in later it had reverted

    I have itunes directory on an external hard drive and want to direct a new installation of itunes on windows 8 to use it. I tried holding down ctrl and clicking itunes and after many tries got it to work one time. When I went back in later it had reverted back to a blank version of itunes and I cant get ctrl to work again. Any other ideas?

    This is sometimes caused by a problem with the iTunesPrefs.xml file, normally found at C:\Users\<User>\AppData\Local\Apple Computer\iTunes\iTunesPrefs.xml. Try dragging this to the desktop and trying again.
    Alternatively the problem may be that you have McAfee AV and it is preventing iTunes from updating the same file and thus causing the problem. See Why does iTunes delete my itunesprefs.xml? for details.
    tt2

  • HT201412 Iphone 4S screen stops working from time to time

    Iphone 4S screen stops working from time to time.
    sometimes for a few seconds, or sometimes many hours.
    I've resetted it when this happens, with no luck.
    I've restored it from back up, and the problem still persists.
    What can i do?

    Hello,
    I had that problem as well and the apple support suggested to turn off the LTE-mode to have a running system and try to exchange the micro-sim by my provider.
    THAT was not an option!
    BUT it seems to solve my problem in the following way after trying a lot of possibilties:
    In the menue properties/help (don't know the exact english word, because I run my phone in german)
    I switched on the nice feature 'flash LED' by incomming calls, msgs, and push infos.
    Today the flash feature was responding to different push notes very slowly.
    By switching this feature off the LTE-mode-tochscreen-not-responding-problem disappeared.
    We tried this on a other iphone, not having the metioned problem, and switched the LED-flash:
    the problem appeared. Switching the LED-flash off: problem disappeared!
    It seems to be a bug that the LED will hint Calls and MSGs in combination with the LTE mode!
    treated my phone very hard today to double check, but its still ok.
    @Apple:
    Please fix that issue in the next update.
    Hope, this helps you guys as well.

  • CRVS2010 - open multiple rpts at the same time, like sheets in a xls file ?

    Hi all,
    is that possible to open multiple reports at the same time, like sheets in a excell file ?
    Is that possible create tabs beside the MainReport tab ? or include reports in the Group Tree ? how can I do it ?
    The application is in asp.net with VS2010 and CR2010.
    The reports used to be in excell with three sheets and now we are migrating them to crystal reports, how can I create the report with those three sheets ?
    thanks !
    Subject modified as per the sticky post at the top of this forum; [Crystal Reports for Visual Studio 2010 Beta - read before posting|Crystal Reports for Visual Studio 2010 Beta - read before posting;
    Edited by: Ludek Uher on Aug 31, 2010 7:33 AM

    I'll make the suggestion to the Program Management group.
    You may want to do a post to the [Crystal Reports Design|SAP Crystal Reports; forum and ask them how they's fake that sort of a requirement. E.g.; there may be some way to make this report look the way you want, but it will be best to ask the experts. Don't mention CRVS2010 as they don't support it and most likely you will not get an answer.
    Ludek

  • Advanced Action works 2 times and stops working

    Hi Everyone,
    I'm creating a Captivate 4 (4.0.1 Build 1658) presentation of a simple LAN setup with 2 hosts.  I have a caption showing setup parameters for the hosts (IP and Hostname) and a dropdown box allowing for selection of which host to configure parameters in the upper right (screenshot below).
    My advanced action executes when the submit button next to the IP field is clicked (Host Name will be next once I figure this little issue out). It checks which host is selected in the dropdown widget and assigns the IP address (HostIP) to the respective host.
    As the subject states, this works 2 times and then stops working.  Here is the code:
    Check If ( HostSelection is equal to Host 1 )
         begin
              Host1IP := HostIP
              rdcmndGotoFrame := 20
         end
    Or Else
         begin
              Host2IP := HostIP
              rdcmndGotoFrame := 30
    end
    The rdcmndGotoFrame assignment seems to be the only way I can reliably pause the presentation after the button is clicked.  Not sure if this is contributing to the problem or not.
    I've done this type of thing before but I can't figure out why this isn't working.  Any help would be greatly appreciated.

    Hello,
    To keep the playhead from moving on, use the expression:
    rdcmndGotoFrame = rdinfoCurrentFrame -1
    Sometimes the -1 is not necessary, you will have to check yourself. I do not know why you choose the absolute frame numbers to go to. And I do not really catch the issue for the rest.
    Lilybiri

  • Is it possible to configure Time Capsule to work with Time Machine (MBP) and Genie Timeline (PC)

    I have an Apple Time Capsule (2TB) and I need to configure it to work with my MBP and Time Machine and also back up my a PC with Genie Timeline Pro 2013 (or any other suggested PC back up software).
    Setting it up to work with Time Machine is simple enough but the PC access is proving to be difficult.
    http://www.genie9.com/support/KB/KnowledgeArticle.aspx?KBID=198
    I followed the above steps but still can't connect to the network drive.  I have reformatted the TC and will be walking through the steps again.  My concern is that the two different operating systems (Win8 and Mavericks) can't share the same destination drive.
    I have created two user accounts with drive sharing activated.  One in my name for my MBP and the other in the name of my partner for her Dell laptop.
    Should the Time Capsule be partitioned?  Can it even be partitioned?  When I use Drive Utility it can't see the TC.  The only way to connect to it seems to be via Airport Utility.
    On a seperate note the TC Router Mode is set to OFF (Bridge Mode).  I have connected it to the ADSL modem/router (WiFi Off) via the WAN port.  All seems to be well.  Am I loosing any useful functionality by doing this?
    The internet settings are set Connect Using DHCP.  I have no issues but I am not really sure what it means and if I should be using other settings.  The ADSL modem/router seems to have all the PPP0E settings.
    The WiFi on the TC has been set up with a 5Ghz and 2.4Ghz network as well as a Guest Network.  I then plan to introduce 2 Airport Express (MB321LL/A). One will be an access point for AirPlay and the other a wireless extender with AirPlay.
    There is also a Canon WiFi printer that accesses the 2.4Ghz network.  It has an Ethanet port so I am wondering if I should disable the wifi connection and cable it and if so to the TC or the DSL modem/router.

    Lion, 7.6.1 firmware and iCloud offers remote access.
    http://www.apple.com/au/support/icloud/back-to-my-mac/
    To do it without the iCloud service your issue is static public IP address.. if you have one this is simple to the point of trivial. If not it is very hard, as Apple did not put in a standard dynamic DNS service.. (ensuring you were roped into their cloud accounts). Static IP from your ISP is the best solution.. if it is possible go for it.
    Then the actual protocol for access is AFP, so the only device you can do this on is a Mac.
    Do you have the TC as the main router?
    If you want any other kind of access, or to avoid icloud use vpn.. which teamviewer is a kind of.. but buy a real vpn router, and bridge the TC.. you can then vpn into your network with full security and get windows access via smb..

  • La Cie Porsche Design External Hard Drive no longer working with Time Machine since update to Yosemite.

    My La Cie Porsche Design External Hard Drive USB 3.0 is no longer working with Time Machine.  Is Yosemite the cause?  How do I fix?

    Can you see the drive in Disk Utility? If so, try selecting it and using the Mount button in the top menu. You can also run repair disk and repair permissions.

  • My MacPro 1,1 will only boot if I resert PRAM each time, and then that does not work each time. When it does boot all is fine. Any idea before I head off to genius bar.

    To boot my MacPro now, I have to go thru the reset Pram. Doesn't work each time. I usually don't turn my machine off. Booting in Safe mode does not work...when it doesn't boot I get only a gray screen, no icons in the screen like bad disk etc. I have replaced the battery. My professor son tells me to setup a new drive internally and install a new system and see if the new OS works. I have 3 internal drives with all data on bays 3 and 4... Bay 1 is the system drive with apps only. I'm 70 miles from the closest Apple store and thought I would ask tonight before driving in.

    Replacing the PRAM ("backup") battery on the machine may be needed.  Here's how, go to page 50 of the user manual:
    http://manuals.info.apple.com/en_US/Mac_Pro_User_Guide.pdf

  • Recently upgraded Mac 24" to Lion (clean install) and now no external hard disks work with Time Machine

    Recently upgraded Mac 24" to Lion (clean install) and now no external hard disks work with Time Machine.
    installed new internal disk first with fresh 10.7.3 Lion software. Also upgrade ram to 4GB. Work great, super fast.
    BUT.... my WD 1TB firewire400 external disks no longer work with the Lion enabled machine now.
    FURTHER... I read somewhere that WD is problematic with Lion but Seagate was not... so I went and bought a new 3TB Seagate GoFlex.
    When it didnt work properly either, I patiently searched and found a software/firward upgrade and applied.
    I re-partitioned disk to extened/journaled standard, etc.
    Then assigned the particition to Time Machine. Drive turned the blue/grey color, so I thought it would work.
    But, it has now been in "preparing" mode in Time Machine for HOURS....
    What is up Apple? So dissappointed. Ive read these type of problems are notorious with Lion and I wish I never upgraded.
    Are you trying to make issues with External disks, to drive people to iCloud?  That trick ont work in me. I will not reward bad behaviour Apple.
    Please provide a fix... I wasted hours/days screwing around with this, instead of using the Mac for what its intended!

    Solved by Pondini, on another thread I opened...
    Answer:
    Sounds like either:
    A directory problem on your internal HD.  Verify your internal HD, and Repair any other volumes being backed-up per #A5 in Time Machine - Troubleshooting.
    Something in OSX may be damaged.  You've tried the "combo," so a fresh copy of OSX (that won't disturb anything else) would be worth a try (and you don't need a tech for that).  See Installing the ''combo'' update and/or Reinstalling OSX.

  • My new macbook pro is giving me hardtime. even apple team is not being to solve it. they replace the motherboard first it didn't work. second time they formatted the computer and that also didn't work. every time my mac showing different problems.

    my new macbook pro is giving me hardtime. even apple team is not being to solve it. they replace the motherboard first it didn't work. second time they formatted the computer and that also didn't work. every time my mac showing different problems.
    At first my computer had issues. Once it go to sleep it will not back again. I dropped my laptop at apple store to fix it. After 10  days they returned my laptop saying they were no able to fix the problem so they replaced motherboard aiming if that might help. Acttually that didn't help.I had same issue again. I visited apple store again. This time they said they could fix, if I will allow them to format the harddrive. I said ok. They formatted it. It was working fine for few daysAfter few days compter is taking.even more than 15 min to shutdown. Now computer has another problem. It is being hang frequently like every 20'to.30 min.
    I don't know what to do? I still have one month left on first year warranty. I have requested couple times to apple associates either to fix or replace or refund. They are showing me rude behavior. They are not understanding my situation. I am a student. I need to do lot of home work. Since last three month my mac book and apple associates giving me hard time. Any suggestions are welcome.

    Contact Apple Customer Care - not Apple Care - Customer Support. Have your receipts handy and/or case numbers. Be patient, be calm, and tell your story just as you have here. I get the sense you are not in the US and don't have access to an Apple Store but are going to an independent shop. This makes using Customer Support all the more important. If phoning isn't viable, use registered mail.
    Since time is running short, be prepared to purchase AppleCare to exennd your warranty 2 more years. Yes, you shouldn't have to do this, but it gives you added protection and more opportunities over the next 2 years to claim a replacement computer if you don't get one immediately. After dealing with a similar unhappy situation with a Mac in the late 1990s I finally got a replacement computer and reimbursed for the AppleCare policy.

  • I am unable to get Lightroom Mobile to work on my home network. The Ipad says "There are no collections to sync, enable lightroom mobile on your computer", but it is enabled.  I got it to work one time on another network but not at home where I use Lightr

    I am unable to get Lightroom Mobile to work on my home network. The Ipad says "There are no collections to sync, enable lightroom mobile on your computer", but it is enabled.  I got it to work one time on another network but not at home where I use Lightroom.

    Hi,
    could you please give us some info on what kind of network you have?
    Can other application communicate with the web?
    Thanks,
    Ignacio

  • Adobe Photoshop CC worked one time? Now get Problem Report Error?

    Adobe Photoshop CC worked one time? Now get Problem Report Error?  tried for 3 days to get working... Help!  please

    I dug a wee bit deeper and thanks to
    Sami Vuoritie 1 month ago
    I was able to fix it. In Filebrowser-view I had a coverflow-preview mode on. Changing it to list-mode problems are gone!
    hope this works for you M00ch?

  • How do i make a tab active and make it stay that way always. If i put a website in my home page in order for the tabs to open automatically in that same homepage , this setting is not working, every time I open a tab , a white window appears .

    How do i make a tab active and make it stay that way always. If i put a website in my home page in order for the tabs to open automatically in that same homepage , this setting is not working, every time I open a tab , the window appears white .

    By default Firefox opens a blank page for a new Tab, there is no setting to change that action without installing an add-on.
    New Tab Homepage extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/777

  • My macbook pro 15' sound is not working, every time i turn on the internal speakers they just turn back off, and i have already tried putting in my headphones 5 or 6 time

    my macbook pro 15' sound is not working, every time i turn on the internal speakers they just turn back off, and i have already tried putting in my headphones 5 or 6 time

    Hi eleni_georgia,
    Welcome to Apple Support Communities.
    The article linked below provides some additional tips that will help you resolve the audio issue that you described.
    Troubleshooting issues with no audio from built-in speakers on Macs
    http://support.apple.com/kb/TS1574
    Cheers!
    -Jason

  • Acrobat subscription stopped working, each time I open it goes straight to the purchase page

    Acrobat subscription stopped working, each time I open it goes straight to the purchase page

    Hi Poepholl,
    I've checked your account, and nothing seems to be out of order with your Acrobat Pro subscription. Are you launching Acrobat on your desktop? If, for some reason, your subscription has reverted to trial mode, I would expect you'd be presented with the trial dialog box. From that dialog box, you should be able to click License this Software, and then sign in with your Adobe ID and password. If that's not the case, please let us know.
    Best,
    Sara

Maybe you are looking for