Working with a center point

How is the Center Point used in CS5 when working with transformation tools? What types of things can be done with it?
Thanks.

When transforming one can just drag the Reference Point from its 
position in the center of the transformation-rectangle (it might be 
hard to see depending on the image).
Or it you want to have it at one of the corners or middles of sides 
you can switch it in the Options bar.
As to the benefits: When one wants to scale radially(alt-shift) from 
another than the oroginal center-position this allows for such a 
transfromation – for example if one has to recreate a lores-montage 
with high-res data it can be easier to line up one single element of a 
semi-transparent SO with the layout and then scale from that point 
until congruence is achieved.

Similar Messages

  • Working With Prices/Decimal Points

    I've recently figured out how to perform calculations on values by assigning them to variables in a click function however I'm working with prices in my app and it seems difficult to get prices/decimal points to claculate properly. At the moment my app looks like this:-
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application
    xmlns:mx="http://www.adobe.com/2006/mxml" layout="vertical">
    <mx:Script>
    <![CDATA[
    private function getTotal():void{
    var addon1Int:int = parseInt(addon1.text);
    var addon1Float:Number = parseFloat(addon1.text);
    var addon1Number:Number = new Number(addon1.text);
    var addon2Int:int = parseInt(addon2.text);
    var addon2Float:Number = parseFloat(addon2.text);
    var addon2Number:Number = new Number(addon2.text);
    var addon3Int:int = parseInt(addon3.text);
    var addon3Float:Number = parseFloat(addon3.text);
    var addon3Number:Number = new Number(addon3.text);
    var addon4Int:int = parseInt(addon4.text);
    var addon4Float:Number = parseFloat(addon4.text);
    var addon4Number:Number = new Number(addon4.text);
    var addon5Int:int = parseInt(addon5.text);
    var addon5Float:Number = parseFloat(addon5.text);
    var addon5Number:Number = new Number(addon5.text);
    var quantityNumber:Number = new Number(quantity.value);
    total.data = (addon1Number + addon2Number + addon3Number + addon4Number + addon5Number) * (quantityNumber);
    ]]>
    </mx:Script>
    <mx:Text id="addon1" text="5.99"/>
    <mx:Text id="addon2" text="6.99"/>
    <mx:Text id="addon3" text="8.99"/>
    <mx:Text id="addon4" text="4.99"/>
    <mx:Text id="addon5" text="3.99"/>
    <mx:NumericStepper id="quantity"/>
    <mx:Button label="Button" click="getTotal();"/>
    <mx:Text id="total"/>
    </mx:Application>
    It works ok if the numbers in the text areas are whole numbers like 8 or 4 but if I use numbers like 02.99, 05.09 the result comes out a bit srange. For example the result of the numbers that I have in there now if I set the value to 2 in the numeric stepper is 61.900000000000006 when I know from using a real calculator it should be 61.9. Is there any way perhaps of rounding this code to the nearest decimal point so it appears as 61.90?
    Are there any good tutorials that any of you know of when working with prices/decimal points in flex?

    I've managed to find the solution for this - the currency formatter. If anyone's interested or has similar problems her's the code that solves it for me:-
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application
    xmlns:mx="http://www.adobe.com/2006/mxml" layout="vertical">
    <mx:Script>
    <![CDATA[
    import mx.formatters.NumberBaseRoundType;
    private function getTotal():void{
    var addon1Int:int = parseInt(addon1.text);
    var addon1Float:Number = parseFloat(addon1.text);
    var addon1Number:Number = new Number(addon1.text);
    var addon2Int:int = parseInt(addon2.text);
    var addon2Float:Number = parseFloat(addon2.text);
    var addon2Number:Number = new Number(addon2.text);
    var addon3Int:int = parseInt(addon3.text);
    var addon3Float:Number = parseFloat(addon3.text);
    var addon3Number:Number = new Number(addon3.text);
    var addon4Int:int = parseInt(addon4.text);
    var addon4Float:Number = parseFloat(addon4.text);
    var addon4Number:Number = new Number(addon4.text);
    var addon5Int:int = parseInt(addon5.text);
    var addon5Float:Number = parseFloat(addon5.text);
    var addon5Number:Number = new Number(addon5.text);
    var quantityNumber:Number = new Number(quantity.value);
    var total:Number = (addon1Number + addon2Number + addon3Number + addon4Number + addon5Number) * (quantityNumber);
    totalAmount.text=currencyFormatter.format(total);
    ]]>
    </mx:Script>
    <mx:CurrencyFormatter id="currencyFormatter" precision="2" rounding="none" decimalSeparatorTo="." thousandsSeparatorTo="," useThousandsSeparator="true" useNegativeSign="true" currencySymbol="£" alignSymbol="left"/>
    <mx:TextInput id="addon1" text="5.99"/>
    <mx:TextInput id="addon2" text="06.99"/>
    <mx:TextInput id="addon3" text="08.99"/>
    <mx:TextInput id="addon4" text="04.99"/>
    <mx:TextInput id="addon5" text="03.99"/>
    <mx:NumericStepper id="quantity"/>
    <mx:Button label="Button" click="getTotal();"/>
    <mx:Text id="totalAmount"/>
    </mx:Application>

  • How do I configure a basic LDAP to work with OPS Center?

    I have Solaris 11 and have configured it a few ways with LDAP. The last setup I used Directory server with a proxy then added LDAP configs. I am having problem getting the clients working correctly but first I need to know if I can just configure LDAP without DSEE and allow OPS Center to control the users?
    Chapter 9 of the Oracle Solaris Administration guide says DSEE is recommended but not required and points you to chapter 14. But I have been unable to figure out how to create the DN and Bind PW prior to configuring LDAP with IDSCONFIG. The OPS Center server is already in play so if configured correctly I should be able to talk to the LDAP server.
    Does anyone know what set I am missing or whether it can be done without DSEE?

    After contacting Oracle I was informed that there Documentation is misleading and that DSEE is required.
    From Oracle
    "The statement "However, while using the Oracle Directory Server Enterprise Edition is recommended, it is not required", does not mean you can configure the Solaris native ldap client without a Directory Server. What the statement means is the Solaris native ldap client is not required to use the Oracle Directory Server, it is recommended, but the Solaris native ldap client can be setup to work with third party Directory Servers. The term "not required" is a reference to the use of the Oracle Directory Server vs a third party Directory Server."
    The documentation does not state that Directory Server of any kind is required.

  • How E-mail functionality works with Interaction Center Webclient

    Dear all,
    How the E-mail functionality works with IC Webclient, How can we can send and receive E-mails to customers and internal employees through Interaction Center.
    Does SMTP server required to be involved for this functionality or External Telephony system Vendor iprovides this function.
    What is ERMS? and why we use this in IC Webclient.
    Please educate me to understand the concept of E-mail functionality in IC Webclient.
    Your help will be highly appreciated.
    Best wishes,
    Raghu ram.

    Hello Raghu ram,
    The SAP CRM Interaction Center uses a concept of a shared email inbox for agent teams. This allows customers to communicate with your Interaction Center by sending emails to a corporate email address like service@yourcompany. You typically group your agents together into queues based on a particular product or skillset. Using this concept, customer's don't send emails directly to a specifc agent's email address, and agent's don't send emails directly to each other. That would rather still be done with groupware products like Microsoft Outlook.
    You have three options for routing emails into the CRM Interaction Center. You can push emails real-time to agents via a screen pop using third-party contact-center software like SAP BCM, Genesys, Avaya, and so on. Or there are two options for sending emails into the agent inbox, where the emails are processed in offline mode by agents, technicians, and engineers. You can route emails directly to a specific inbox group/queue by using different emails addreses. Or, you can leverage ERMS to decide where which agents to route the email to based on business rules.
    Please see the various notes mentioned above that appear in the sticky note on top of this forum. For example, there is a nice 85 page FAQ document on the Agent Inbox in note 882653. And ERMS note 940882 is also very useful.
    Regards,
    John

  • Digi@nwhere A/D Plus on Windows XP MCE (not working with Media Center)

    I just recently bought a MSI Digi@nywhere A/D Plus from Newegg.com http://www.newegg.com/Product/Product.aspx?Item=N82E16815127008 to replace the WinTV by Hauppage that came with my HP Media Center m7640n, after installing the card and drivers, I am able to watch TV in the ArcSoft application that came on the CD, but using the Windows Media Software
    I've applied every possible update/rollup for my Windows Media software, but it just says Quote
    "At least one tuner that supports a standard (NTSC) TV signal must be installed to configure the TV signal. Please ensure that your tuner hardware is correctly installed, restart the computer, and try again."
    What am I doing wrongly that Media Center is not finding the card? Since my software is the 2005 version, from what I've read supports ATSC, and was listed on the Newegg.com and MSI spec as supported.
    Quote
    Windows XP SP2 / MCE 2005 / Vista (when using MCE 2005 OS, an extra 3rd party DVD decoder must be installed) / Windows 7
    Is the 3rd party DVD decoder required for device use or just for burning to disc?

    Quote from: Stu on 30-October-10, 17:38:44
    Did you use the latest driver from here?
    http://eu.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=132&prod_no=1948
    Yeah, I've got the "Digi@nywhere A/D Plus BDA driver" installed on my PC
    and my "device manager" shows that it's currently the 1.345.9.1009
    I can view the TV in the ArcSoft TotalMedia software and everything works fine, but Media Center still fails to recognize the card. I'd really prefer Media Center because of it's enhance EPG & recording scheduling over TotalMedia
    Is there something more to be done to/with Media Center? Registry edit or 3rd party add-on that I'm missing?

  • Generic delta not working with '0calday' change pointer

    I have created a generic datasource based on a database view and extracted data with afull load infopackage into BI. Then, I configured the generic delta with a date field and 0calday type. Set the safety interval of 1 day as a lower limit. Saved the datasource in R/3 and Replicated and activated the datasource in BI. Done some changes to a record in R/3.
    After that, I created an Init delta infopackage (with data) and extracted the data with the same number of records as extracted in the full load. Note that all these were done on the same day.
    If I have done something wrong by doing it on a same day, I should get 0 records.
    Why did I get the same data with a delta init package? I wonder the generic delta is configured correctly or not? Please tell me where I have gone wrong. Thanks..

    Hi Shiva,
    While running the delta init, you have option of without data transfer and, with data transfer.
    I am sure, you used with data transfer and thats why  got all those records same as full load.
    U can use different options like.
    1. DO the init without data transfer and then do the full load, and then run delta everyday for delta records
    2. Do the init with data transfer then no need to do the full load and the subsequent delta will take care day onwards,
    I guess your are good to do the delta load by tomorrow.
    Thank-You.
    Regards,
    Vinod

  • Strange- A 1" horizontal strip on the screen (which includes the tabs + 0.5cm above and below) does not work with the mouse pointer, only with firefox

    The mouse wont click anywhere over a 1" strip that includes the area where the tabs are lined, and extends 0.5cm above and below this. So, to open or close a tab I can only use Ctrl T or Ctrl W respectively. And, for ex, I cannot click on the top most line on Facebook (which has the Home, messages, news feeds options etc) or that of Twitter, and so on. I have used Mozilla Firefox all my life and this has never happened before. I don't have this problem with any other browser like Internet explorer or Google Chrome. I find it very strange.

    Both the Yahoo! Toolbar extension and the Babylon extension have been reported to cause this issue. Disable or uninstall those add-ons.
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Will ALUI Publisher work in Web Center 10G?

    I am upgrading to 10G, anyone knows if Publisher (i.e ALUI Content) will work with Web Center???
    Thank You,
    -Lilach

    Publisher 6.4 and 6.5 do work with WebCenter Interaction 10.3, but not WebCenter itself.
    And there will be no further updates to Publisher; the functionality will be replaced UCM. The WCI statement of direction has some details about that:
    http://www.oracle.com/technology/products/webcenter/interaction/pdf/wci_10gr3_sod.pdf

  • Location with CTI Route Point

    Hi
    Does anybody knows whether Location setting will work with CTI Route Point?
    Is there a documentation? I can't seem to get it to limit amount of calls to route point.

    I belive this is due to the fact that the call does not get connected to CTI RP for very long time, it is re-directed to a cti port whatever cti application is used, ie IPCC, etc. So you should be concerned about provisioning Location based CAC on CTI ports.
    Chris

  • How do I get fios to work with my new desktop w/ Windows Media Center

    Can someone please help me I have "fios".TV and internet 1HDSTB + 1HDDVR with multi room dvr Home media mgr.how do I get fios to work with my new desktop HP Pavillion m9715f**(specs below)**w/ Windows Media Center or did I just throw away my money?
    also equipted is 47" Samsung 850series 1080p 120hertz HD LCD TV + 36" Samsung 560series 1080p 60hertz HD LCD TV and 19"Samsung 950b LCD Monitor
    ** computer specs**
    Product number NZ017AA
    Introduction date 30-Jun-2009
    Country/region sold in: United States,Canada
    Hardware Base processor
    Phenom-9650 (A) 2.3 GHz (95W) 3600 MHz HyperTransport 3.0 Socket, AM2+
    Chipset AMD 780G
    Motherboard Manufacturer: MSI Motherboard Name: MS-7548 HP/Compaq motherboard name: Aspen-GL8E
    Power supply 300W
    Memory
    Component Attributes Memory Installed 8 GB Maximum allowed 16 GB (4 x 4 GB) (64-bit OS)
    4 GB* (4 x 1 GB) (32-bit OS)
    *Actual available memory may be less Speed supported PC2-6400 MB/sec Type 240 pin, DDR2
    Hard drive750 GB SATA 3G (3.0 Gb/sec)7200 rpm
    Blu-ray player & SuperMulti DVD burner with LightScribe Technology drive
    This Blu-Ray Disc DVD drive introduces a player that reads Blu-ray Disc format enabling you to watch high-definition Blu-ray Disc movies. NOTE: This drive does not include high-definition write capability.
    Formats/Disc types Write speeds Read speeds Storage capacity Blu-ray Disc BD-ROM SL NA up to 6X up to 25 GB BD-ROM DL NA up to 4.8X up to 50 GB BD-R SL not supported up to 6X up to 25 GB BD-R DL not supported up to 4.8X up to 50 GB BD-RE SL not supported up to 2.3X up to 25 GB BD-RE DL not supported up to 2X up to 50 GB HD DVD not supported DVD DVD-ROM SL NA up to 16X up to 4.7 GB DVD-ROM DL NA up to 8X up to 8.5 GB DVD+R SL up to 16X up to 12X up to 4.7 GB DVD+R DL up to 4X up to 8X up to 8.5 GB DVD+RW SL up to 8X up to 10X up to 4.7 GB DVD+RW DL not supported DVD-R SL up to 16X up to 12X up to 4.7 GB DVD-R DL up to 4X up to 8X up to 8.5 GB DVD-RW SL up to 6X up to 10X up to 4.7 GB DVD-RW DL not supported DVD-RAM up to 5X up to 5X up to 4.7 GB CD CDROM NA up to 40X up to 700 MB CDR up to 40X up to 40X up to 700 MB CDRW up to 24X up to 40X up to 700 MB CD-DA NA up to 32X up to 700 MB Video CD NA up to 10X up to 700 MB
    Wireless Wireless LAN 802.11 b/g
    Video Graphics Radeon HD4350
    512 MB DDR2 memory
    I/O Ports: HDMI, VGA, single-link DVI
    Television Hauppauge ATSC/NTSC TV tuner card with FM tuner
    Sound/Audio High Definition 8-channel audio
    ALC 888S chipset
    Network (LAN) Integrated 10/100/1000 Base-T networking interface
    Memory card reader
    Contains an Infrared receiver for remote control
    Supports the following cards:
    Compact Flash I
    Compact Flash II
    IBM Microdrive
    Secure Digital (SD)
    mini-SD
    MultiMediaCard (MMC)
    Reduced size MultiMediaCard (RS-MMC)
    MultiMediaCard Plus (MMC plus)
    MultiMediaCard Mobile (MMC mobile)
    Memory Stick
    Memory Stick Pro
    Memory Stick Duo
    Memory Stick Pro Duo
    SmartMedia
    xD Picture Card (xD = extreme digital)
    External I/O ports
    I/O ports on the front panel
    Port type Quantity 15-in-1 (4 slot) with IR Receiver One USB Two Headphone One Microphone One Audio L-R One S-video in One Composite video in One
    I/O ports on the back panel
    Port type Quantity PS/2 (keyboard, mouse) Two S/PDIF out (coaxial) One VGA One (disabled due to the installation of a graphics card) DVI-D One USB Four 1394a One LAN One Audio (side speaker out, rear speaker out, center/subwoofer-out , line-in, line-out, microphone) One Each
    Expansion slots
    Slot type Quantity PCI Express x16 One (None available) PCI Express x1 Three (Two available)
    Drive bays
    Bay type Quantity 5.25" Two (One available) 3.5" Two (One available) Personal Media Drive One (One available) Pocket Media Drive One (One available)
    Keyboard and mouse HP multimedia keyboard HP PS/2 optical mouse
    Remote Control USB infrared remote control,Remote control expansion card with IR ports,IR emitter cable to transmit codes to a set top box

    Based on what you've posted, your computer does not have the right tuner.   You need a QAM tuner to record locals from FiOS, or a CableCard tuner to record all local and cable channels from FiOS.
    QAM tuners to record local channels only
    This requires Windows Vista or Windows 7
    Hauppauge WinTV-HVR-2250
    SiliconDust HDHomeRun (info on a sale)
    CableCard tuner to record local and cable channels
    This requires Windows 7 + one CableCard from Verizon for $3.99/mo
    ATI TV Wonder Digital PC CableCard Tuner (records one channel at a time) -- $200-$250 on ebay
    Ceton MOCUR tuner (records four channels at a time) -- coming in early 2010 for $400-$600
    Make sure your computer has Windows 7 Home Premium (or better) installed.   That's necessary to support CableCard tuners.
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.

  • I recently bought, from the original website of Adobe, Photoshop elements 13. However, when I go with my mouse pointer over the menu, It hangs or he works very slow. Does anyone have an idea how I can fix it? I have already downloaded updates, both from A

    I recently bought, from the original website of Adobe, Photoshop elements 13. However, when I go with my mouse pointer over the menu, It hangs or he works very slow. Does anyone have an idea how I can fix it? I have already downloaded updates, both from Adobe and Windows. I have a new pc with window 8.1.

    It could be a coincidence, but I rebooted the machine and (knock on wood) PSE13 seems to be working ok.

  • Game center wont recognise my apple ID but works with other accounts? On mountain Lion?

    Game center wont recognise my apple ID but works with other accounts? On mountain Lion? i tryed to test out the new game center on mountain lion and it will not let me log in no message pops up or forgot your password but when i try other accounts it works fine help please i really want to use game center for mountian lion!

    Game center wont recognise my apple ID but works with other accounts? On mountain Lion? i tryed to test out the new game center on mountain lion and it will not let me log in no message pops up or forgot your password but when i try other accounts it works fine help please i really want to use game center for mountian lion!

  • HT5622 The Game Center used to work with my Apple ID before I updated to iOS 7.4, I used to play multiple player with EA Real Racing 3 game but it doesn't work at all and every time I tried to go to the Game Center it's just blank, even to the settings no

    The Game Center used to work with my Apple ID before I updated to iOS 7.4, I used to play multiple player with EA Real Racing 3 game but it doesn't work at all and every time I tried to go to the Game Center it's just blank, even to the settings nothing!

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Go to Settings>Game Center and sign out and sign back in
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             

  • Is there a way to make an audio clip not cover the whole project? I want to add audio clip or song and let it start at a certain point in the project. I'm working with iMovie on IPad!

    Is there a way to make an audio clip not cover the whole project in iMovie? I want to add audio clip or song and let it start at a certain point in the project. Whenever I add audio or song it covers the whole project. I'm working with iMovie on IPad!

    Thank you for your reply Karsten but unfortunately this didn't help me so far. Or maybe I'm missing something?
    First the link is a tutorial for iMovie on a Mac. I'm using iMovie on iPad so the steps are inapplicable.
    Second it is only possible for me to manipulate the end part of the sound clip to whichever duration I want. But I can't do the same with the 'beginning' of the sound clip.
    I simply want to place some photos in the beginning of my video with no sound in the background then after like 2 secs I want to start the music clip. For some reason that is not possible! Cause every time I drop the music clip unto my project timeline it automatically place it self along with the first frame in the project! And consequently the photos and music are forced to start together.
    Hope I'm making sense...

  • Bought a used Ipod touch 3rd gen for my child and when charged I get a screen with a picture of a computer charging cord with an arrow pointing to a music symbol.  What do I do to get it to work?

    I've plugged it into the computer and nothing happens...nothing changes....the screen still has a pic of the computer charging cord with an arrow pointing to a music symbol at the top of the screen.  I can't seem to get it to do anything.

    For how to restore see:
    iTunes: Restoring iOS software
    Place the iOS device in Recovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Maybe you are looking for