Working with a magnetic stripe
hi i want to know the api for reading and writing a data on magnetic stripe and need soem help abt using them so what is a good thing for me to do ? thanxs..
The card with the magnetic stripe is swiped through a reader, right? That's the thing you need to find out about -- does it produce output like a serial port or a keyboard or what? Once you know that, you use whatever API is appropriate for that data stream.
Similar Messages
-
How to read magnetic stripe cards
hello everybody,
I have asked about magnetic stripe cards regularly. can any one tell me whether the data reading can be done from simple array copy function or we need anything else.
does the card listener works for the magnetic stripe in same way .
and do we have any simulator to test our program
thank youI'm looking into how to read information from a
Magnetic Stripe Cards and not a Smart Card. My
question is, does Java Card API support this or is it
only Smart Cards ??You need a Strip Card Reader and Software, Nothing to do with Java Card, Which is for Smart Cards. Smart Cards are much safer than Magnetic Strips. -
Can I use audio CDs with magnetic strips with my iMac?
I have a few CDs from my public library that contain magnetic strips on the title side of the discs (I think this is to prevent theft). When I checked out the CDs, the strips were demagnetized.
So my question is: can I put these CDs into my iMac's optical drive without damaging the computer?
Thank you for your help!What I would do, is first turn the computer off so that the disc grabbing mechanism isn't on. Then try inserting the disc into the slot. If you meet with any kind of resistance trying to put it in, don't risk it. If it slides in and out smoothly when you're doing it by hand, then you're probably safe.
-
my iphone 5 camera suddenly stop working and the shutter dont open after some minutes shutter open with some dolor stripes and it takes 2 or 3 days and again start working normaly it happens every 3 weeks.is this a soft ware problem??
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Cheers, Tom -
IIS 6.0 Policyagent not working with AM loadbalancer
Trying to enable SSO for IIS 6.0 website running on port 80 with Access manager 7.0. AM loadbalancer URL is configured on OracleAS webcache.
Everything works fine when policyagent is configured with one of the AM servers instead of load balancer URL. But when configured with AM loadbalancer URL a blank page gets displayed after user gives his credentials on the AM authentication page and submits. Below is the error part of log generated at policyagent's end.
2008-04-21 19:08:04.556MaxDebug 2160:18ef080 AuthService: <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<RequestSet vers="1.0" svcid="auth" reqid="0">
<Request><![CDATA[<?xml version="1.0" encoding="UTF-8"?><AuthContext version="1.0">
<Request authIdentifier="0"><NewAuthContext orgName="/"/></Request></AuthContext>]]></Request>
</RequestSet>
2008-04-21 19:08:04.556MaxDebug 2160:18ef080 AuthService: BaseService::sendRequest Request line: POST /amserver/authservice HTTP/1.0
2008-04-21 19:08:04.556 Debug 2160:18ef080 AuthService: BaseService::sendRequest Cookie and Headers =Host: am.xxxx.com
2008-04-21 19:08:04.556 Debug 2160:18ef080 AuthService: BaseService::sendRequest Content-Length =Content-Length: 296
2008-04-21 19:08:04.556 Debug 2160:18ef080 AuthService: BaseService::sendRequest Header Suffix =Accept: text/xml
Content-Type: text/xml; charset=UTF-8
2008-04-21 19:08:04.556MaxDebug 2160:18ef080 AuthService: BaseService::sendRequest(): Total chunks: 9.
2008-04-21 19:08:04.556MaxDebug 2160:18ef080 AuthService: BaseService::sendRequest(): Sent 9 chunks.
2008-04-21 19:08:04.556 Debug 2160:18ef080 AuthService: HTTP Status = 404 (Not Found)
2008-04-21 19:08:04.556MaxDebug 2160:18ef080 AuthService: Http::Response::readAndParse(): Reading headers.
2008-04-21 19:08:04.556MaxDebug 2160:18ef080 AuthService: Content-Type: text/html; charset=iso-8859-1
2008-04-21 19:08:04.556MaxDebug 2160:18ef080 AuthService: Connection: Close
2008-04-21 19:08:04.556MaxDebug 2160:18ef080 AuthService: Server: Oracle-Application-Server-10g/10.1.2.2.0 Oracle-HTTP-Server OracleAS-Web-Cache-10g/10.1.2.2.0 (N;ecid=1254975795829,0)
2008-04-21 19:08:04.556MaxDebug 2160:18ef080 AuthService: Date: Mon, 21 Apr 2008 13:38:04 GMT
2008-04-21 19:08:04.556MaxDebug 2160:18ef080 AuthService: Http::Response::readAndParse(): Reading body content of length: 73435745963999573
2008-04-21 19:08:04.556MaxDebug 2160:18ef080 all: Connection::waitForReply(): returns with status success.
2008-04-21 19:08:04.556MaxDebug 2160:18ef080 AuthService: Http::Response::readAndParse(): Completed processing the response with status: success
2008-04-21 19:08:04.556MaxDebug 2160:18ef080 AuthService: <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
<HTML><HEAD>
<TITLE>404 Not Found</TITLE>
</HEAD><BODY>
<H1>Not Found</H1>
The requested URL /amserver/authservice was not found on this server.<P>
<HR>
<ADDRESS>Oracle-Application-Server-10g/10.1.2.2.0 Oracle-HTTP-Server Server at INTRANET-WC.xxxx.COM Port 7777</ADDRESS>
</BODY></HTML>
Any idea why it is looking for /amserver/authservice context on the webcache??
Thankscom.sun.am.cookie.name = iPlanetDirectoryPro
# If this property is set to true the cookies set by the agent
# will be marked secure and will only be transmitted if the
# communications channel with the host is a secure one.
com.sun.am.cookie.secure = false
# The URL for the Access Manager Naming service.
com.sun.am.naming.url = http://<Loadbalancerhostname>:7777/amserver/namingservice http://<Loadbalancerhostname>:7777/amserver/namingservice
com.sun.am.ignore.naming_service = true
# The URL of the login page on the Access Manager.
com.sun.am.policy.am.login.url = http://<Loadbalancerhostname>:7777/amserver/UI/Login http://<Loadbalancerhostname>:7777/amserver/UI/Login
# Name of the file to use for logging messages.
com.sun.am.policy.agents.config.local.log.file = D:/Sun/Access_Manager/Agents/2.2/debug/Identifier_1/amAgent
# This property is used for Log Rotation. The value of the property specifies
# whether the agent deployed on the server supports the feature of not. If set
# to false all log messages are written to the same file.
com.sun.am.policy.agents.config.local.log.rotate = true
# Name of the Access Manager log file to use for logging messages to
# Access Manager.
# Just the name of the file is needed. The directory of the file
# is determined by settings configured on the Access Manager.
com.sun.am.policy.agents.config.remote.log = amAuthLog.<Protectedserverhostname>.80
com.sun.am.log.level = all:5
# The org, username and password for Agent to login to AM.
com.sun.am.policy.am.username = lmsagent1
com.sun.am.policy.am.password = HCuUvbq+uuVQ0LA9cDZUsw==
# Name of the directory containing the certificate databases for SSL.
com.sun.am.sslcert.dir = D:/Sun/Access_Manager/Agents/2.2/iis6/cert
# Set this property if the certificate databases in the directory specified
# by the previous property have a prefix.
com.sun.am.certdb.prefix =
# Should agent trust all server certificates when Access Manager
# is running SSL?
# Possible values are true or false.
com.sun.am.trust_server_certs = true
# Should the policy SDK use the Access Manager notification
# mechanism to maintain the consistency of its internal cache? If the value
# is false, then a polling mechanism is used to maintain cache consistency.
# Possible values are true or false.
com.sun.am.notification.enable = true
# URL to which notification messages should be sent if notification is
# enabled, see previous property.
com.sun.am.notification.url = http://<Protectedserverhostname>:80/amagent/UpdateAgentCacheServlet?shortcircuit=false
# This property determines whether URL string case sensitivity is
# obeyed during policy evaluation
com.sun.am.policy.am.url_comparison.case_ignore = true
# This property determines the amount of time (in minutes) a policy entry
# remains valid after it has been added to the cache. The default
# value for this property is 3 minutes.
com.sun.am.policy.am.polling.interval=3
# This property determines the amount of time (in minutes) an sso entry
# remains valid after it has been added to the cache. The default
# value for this property is 3 minutes.
com.sun.am.sso.polling.period=3
# This property allows the user to configure the User Id parameter passed
# by the session information from the access manager. The value of User
# Id will be used by the agent to set the value of REMOTE_USER server
# variable. By default this parameter is set to "UserToken"
com.sun.am.policy.am.userid.param=UserToken
# Profile attributes fetch mode
# String attribute mode to specify if additional user profile attributes should
# be introduced into the request. Possible values are:
# NONE - no additional user profile attributes will be introduced.
# HTTP_HEADER - additional user profile attributes will be introduced into
# HTTP header.
# HTTP_COOKIE - additional user profile attributes will be introduced through
# cookies.
# If not within these values, it will be considered as NONE.
com.sun.am.policy.agents.config.profile.attribute.fetch.mode=HTTP_HEADER
# The user profile attributes to be added to the HTTP header. The
# specification is of the format ldap_attribute_name|http_header_name[,...].
# ldap_attribute_name is the attribute in data store to be fetched and
# http_header_name is the name of the header to which the value needs
# to be assigned.
# NOTE: In most cases, in a destination application where a "http_header_name"
# shows up as a request header, it will be prefixed by HTTP_, and all
# lower case letters will become upper case, and any - will become _;
# For example, "common-name" would become "HTTP_COMMON_NAME"
com.sun.am.policy.agents.config.profile.attribute.map=myuid|my_uid,cn|common-name,ou|organizational-unit,o|organization,mail|email,employeenumber|employee-number,c|country
# Session attributes mode
# String attribute mode to specify if additional user session attributes should
# be introduced into the request. Possible values are:
# NONE - no additional user session attributes will be introduced.
# HTTP_HEADER - additional user session attributes will be introduced into HTTP header.
# HTTP_COOKIE - additional user session attributes will be introduced through cookies.
# If not within these values, it will be considered as NONE.
com.sun.am.policy.agents.config.session.attribute.fetch.mode=NONE
# The session attributes to be added to the HTTP header. The specification is
# of the format session_attribute_name|http_header_name[,...].
# session_attribute_name is the attribute in session to be fetched and
# http_header_name is the name of the header to which the value needs to be
# assigned.
# NOTE: In most cases, in a destination application where a "http_header_name"
# shows up as a request header, it will be prefixed by HTTP_, and all
# lower case letters will become upper case, and any - will become _;
# For example, "common-name" would become "HTTP_COMMON_NAME"
com.sun.am.policy.agents.config.session.attribute.map=
# Response Attribute Fetch Mode
# String attribute mode to specify if additional user response attributes should
# be introduced into the request. Possible values are:
# NONE - no additional user response attributes will be introduced.
# HTTP_HEADER - additional user response attributes will be introduced into
# HTTP header.
# HTTP_COOKIE - additional user response attributes will be introduced through
# cookies.
# If not within these values, it will be considered as NONE.
com.sun.am.policy.agents.config.response.attribute.fetch.mode=NONE
# The response attributes to be added to the HTTP header. The specification is
# of the format response_attribute_name|http_header_name[,...].
# response_attribute_name is the attribute in policy response to be fetched and
# http_header_name is the name of the header to which the value needs to be
# assigned.
# NOTE: In most cases, in a destination application where a "http_header_name"
# shows up as a request header, it will be prefixed by HTTP_, and all
# lower case letters will become upper case, and any - will become _;
# For example, "common-name" would become "HTTP_COMMON_NAME"
com.sun.am.policy.agents.config.response.attribute.map=
# indicate where a load balancer is used for Access Manager
# services.
# true | false
com.sun.am.load_balancer.enable = true
####Agent Configuration####
# this is for product versioning, please do not modify it
com.sun.am.policy.agents.config.version=2.2
# Set the url access logging level. the choices are
# LOG_NONE - do not log user access to url
# LOG_DENY - log url access that was denied.
# LOG_ALLOW - log url access that was allowed.
# LOG_BOTH - log url access that was allowed or denied.
com.sun.am.policy.agents.config.audit.accesstype = LOG_BOTH
# Agent prefix
com.sun.am.policy.agents.config.agenturi.prefix = http://<Protectedserverhostname>:80/amagent
# Locale setting.
com.sun.am.policy.agents.config.locale = en_US
# The unique identifier for this agent instance.
com.sun.am.policy.agents.config.instance.name = unused
# Do SSO only
# Boolean attribute to indicate whether the agent will just enforce user
# authentication (SSO) without enforcing policies (authorization)
com.sun.am.policy.agents.config.do_sso_only = true
# The URL of the access denied page. If no value is specified, then
# the agent will return an HTTP status of 403 (Forbidden).
com.sun.am.policy.agents.config.accessdenied.url =
# This property indicates if FQDN checking is enabled or not.
com.sun.am.policy.agents.config.fqdn.check.enable = true
# Default FQDN is the fully qualified hostname that the users should use
# in order to access resources on this web server instance. This is a
# required configuration value without which the Web server may not
# startup correctly.
# The primary purpose of specifying this property is to ensure that if
# the users try to access protected resources on this web server
# instance without specifying the FQDN in the browser URL, the Agent
# can take corrective action and redirect the user to the URL that
# contains the correct FQDN.
# This property is set during the agent installation and need not be
# modified unless absolutely necessary to accommodate deployment
# requirements.
# WARNING: Invalid value for this property can result in the Web Server
# becoming unusable or the resources becoming inaccessible.
# See also: com.sun.am.policy.agents.config.fqdn.check.enable,
# com.sun.am.policy.agents.config.fqdn.map
com.sun.am.policy.agents.config.fqdn.default = <Protectedserverhostname>
# The FQDN Map is a simple map that enables the Agent to take corrective
# action in the case where the users may have typed in an incorrect URL
# such as by specifying partial hostname or using an IP address to
# access protected resources. It redirects the browser to the URL
# with fully qualified domain name so that cookies related to the domain
# are received by the agents.
# The format for this property is:
# com.sun.am.policy.agents.config.fqdn.map = [invalid_hostname|valid_hostname][,...]
# This property can also be used so that the agents use the name specified
# in this map instead of the web server's actual name. This can be
# accomplished by doing the following.
# Say you want your server to be addressed as xyz.hostname.com whereas the
# actual name of the server is abc.hostname.com. The browsers only knows
# xyz.hostname.com and you have specified polices using xyz.hostname.com at
# the Access Manager policy console, in this file set the mapping as
# com.sun.am.policy.agents.fqdn.map = valid|xyz.hostname.com
# Another example is if you have multiple virtual servers say rst.hostname.com,
# uvw.hostname.com and xyz.hostname.com pointing to the same actual server
# abc.hostname.com and each of the virtual servers have their own policies
# defined, then the fqdnMap should be defined as follows:
# com.sun.am.policy.agents.fqdn.map = valid1|rst.hostname.com,valid2|uvw.hostname.com,valid3|xyz.hostname.com
# WARNING: Invalid value for this property can result in the Web Server
# becoming unusable or the resources becoming inaccessible.
com.sun.am.policy.agents.config.fqdn.map =
# Cookie Reset
# This property must be set to true, if this agent needs to
# reset cookies in the response before redirecting to
# Access Manager for Authentication.
# By default this is set to false.
# Example : com.sun.am.policy.agents.config.cookie.reset.enable=true
com.sun.am.policy.agents.config.cookie.reset.enable=false
# This property gives the comma separated list of Cookies, that
# need to be included in the Redirect Response to Access Manager.
# This property is used only if the Cookie Reset feature is enabled.
# The Cookie details need to be specified in the following Format
# name[=value][;Domain=value]
# If "Domain" is not specified, then the default agent domain is
# used to set the Cookie.
# Example : com.sun.am.policy.agents.config.cookie.reset.list=LtpaToken,
# token=value;Domain=subdomain.domain.com
com.sun.am.policy.agents.config.cookie.reset.list=
# This property gives the space separated list of domains in
# which cookies have to be set in a CDSSO scenario. This property
# is used only if CDSSO is enabled.
# If this property is left blank then the fully qualified cookie
# domain for the agent server will be used for setting the cookie
# domain. In such case it is a host cookie instead of a domain cookie.
# Example : com.sun.am.policy.agents.config.cookie.domain.list=.sun.com .iplanet.com
com.sun.am.policy.agents.config.cookie.domain.list=
# user id returned if accessing global allow page and not authenticated
com.sun.am.policy.agents.config.anonymous_user=anonymous
# Enable/Disable REMOTE_USER processing for anonymous users
# true | false
com.sun.am.policy.agents.config.anonymous_user.enable=false
# Not enforced list is the list of URLs for which no authentication is
# required. Wildcards can be used to define a pattern of URLs.
# The URLs specified may not contain any query parameters.
# Each service have their own not enforced list. The service name is suffixed
# after "# com.sun.am.policy.agents.notenforcedList." to specify a list
# for a particular service. SPACE is the separator between the URL.
com.sun.am.policy.agents.config.notenforced_list = SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/UI/* SERVER_PROTO://SERVER_HOST:SERVER_PORTCONSOLE_DEPLOY_URI/* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/login_images/* SERVER_PROTO://SERVER_HOST:SERVER_PORT/docs* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/namingservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/sessionservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/loggingservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/profileservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/policyservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/config* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/js/* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/css/* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/authservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/SAMLAwareServlet SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/SAMLSOAPReceiver SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/SAMLPOSTProfileServlet
# Boolean attribute to indicate whether the above list is a not enforced list
# or an enforced list; When the value is true, the list means enforced list,
# or in other words, the whole web site is open/accessible without
# authentication except for those URLs in the list.
com.sun.am.policy.agents.config.notenforced_list.invert = false
# Not enforced client IP address list is a list of client IP addresses.
# No authentication and authorization are required for the requests coming
# from these client IP addresses. The IP address must be in the form of
# eg: 192.168.12.2 1.1.1.1
com.sun.am.policy.agents.config.notenforced_client_ip_list =
# Enable POST data preservation; By default it is set to false
com.sun.am.policy.agents.config.postdata.preserve.enable = false
# POST data preservation : POST cache entry lifetime in minutes,
# After the specified interval, the entry will be dropped
com.sun.am.policy.agents.config.postcache.entry.lifetime = 10
# Cross-Domain Single Sign On URL
# Is CDSSO enabled.
com.sun.am.policy.agents.config.cdsso.enable=false
# This is the URL the user will be redirected to for authentication
# in a CDSSO Scenario.
com.sun.am.policy.agents.config.cdcservlet.url =
# Enable/Disable client IP address validation. This validate
# will check if the subsequent browser requests come from the
# same ip address that the SSO token is initially issued against
com.sun.am.policy.agents.config.client_ip_validation.enable = false
# Below properties are used to define cookie prefix and cookie max age
com.sun.am.policy.agents.config.profile.attribute.cookie.prefix = HTTP_
com.sun.am.policy.agents.config.profile.attribute.cookie.maxage = 300
# Logout URL - application's Logout URL.
# This URL is not enforced by policy.
# if set, agent will intercept this URL and destroy the user's session,
# if any. The application's logout URL will be allowed whether or not
# the session destroy is successful.
com.sun.am.policy.agents.config.logout.url=
# Any cookies to be reset upon logout in the same format as cookie_reset_list
com.sun.am.policy.agents.config.logout.cookie.reset.list =
# By default, when a policy decision for a resource is needed,
# agent gets and caches the policy decision of the resource and
# all resource from the root of the resource down, from the Access Manager.
# For example, if the resource is http://host/a/b/c, the the root of the
# resource is http://host/. This is because more resources from the
# same path are likely to be accessed subsequently.
# However this may take a long time the first time if there
# are many many policies defined under the root resource.
# To have agent get and cache the policy decision for the resource only,
# set the following property to false.
com.sun.am.policy.am.fetch_from_root_resource = true
# Whether to get the client's hostname through DNS reverse lookup for use
# in policy evaluation.
# It is true by default, if the property does not exist or if it is
# any value other than false.
com.sun.am.policy.agents.config.get_client_host_name = true
# The following property is to enable native encoding of
# ldap header attributes forwarded by agents. If set to true
# agent will encode the ldap header value in the default
# encoding of OS locale. If set to false ldap header values
# will be encoded in UTF-8
com.sun.am.policy.agents.config.convert_mbyte.enable = false
# The following property is to enable encoding of URL special
# chars, if any. If set to true agent will encode URL special
# characters before sending for policy evaluation.
com.sun.am.policy.agents.config.encode_url_special_chars.enable = false
#When the not enforced list or policy has a wildcard '*' character, agent
#strips the path info from the request URI and uses the resulting request
#URI to check against the not enforced list or policy instead of the entire
#request URI, in order to prevent someone from getting access to any URI by
#simply appending the matching pattern in the policy or not enforced list.
#For example, if the not enforced list has the value http://host/*.gif,
#stripping the path info from the request URI will prevent someone from
#getting access to http://host/index.html by using the URL http://host/index.html?hack.gif.
#However when a web server (for exmample apache) is configured to be a reverse
#proxy server for a J2EE application server, path info is interpreted in a different
#manner since it maps to a resource on the proxy instead of the app server.
#This prevents the not enforced list or policy from being applied to part of
#the URI below the app serverpath if there is a wildcard character. For example,
#if the not enforced list has value http://host/webapp/servcontext/* and the
#request URL is http://host/webapp/servcontext/example.jsp the path info
#is /servcontext/example.jsp and the resulting request URL with path info stripped
#is http://host/webapp, which will not match the not enforced list. By setting the
#following property to true, the path info will not be stripped from the request URL
#even if there is a wild character in the not enforced list or policy.
#Be aware though that if this is set to true there should be nothing following the
#wildcard character '*' in the not enforced list or policy, or the
#security loophole described above may occur.
com.sun.am.policy.agents.config.ignore_path_info = false
# Override the request url given by the web server with
# the protocol, host or port of the agent's uri specified in
# the com.sun.am.policy.agents.agenturiprefix property.
# These may be needed if the agent is sitting behind a ssl off-loader,
# load balancer, or proxy, and either the protocol (HTTP scheme),
# hostname, or port of the machine in front of agent which users go through
# is different from the agent's protocol, host or port.
com.sun.am.policy.agents.config.override_protocol =
com.sun.am.policy.agents.config.override_host =
com.sun.am.policy.agents.config.override_port =
# Override the notification url in the same way as other request urls.
# Set this to true if any one of the override properties above is true,
# and if the notification url is coming through the proxy or load balancer
# in the same way as other request url's.
com.sun.am.policy.agents.config.override_notification.url =
# The following property defines how long to wait in attempting
# to connect to an Access Manager AUTH server.
# The default value is 2 seconds. This value needs to be increased
# when receiving the error "unable to find active Access Manager Auth server"
com.sun.am.policy.agents.config.connection_timeout =
# Time in milliseconds the agent will wait to receive the
# response from Access Manager. After the timeout, the connection
# will be drop.
# A value of 0 means that the agent will wait until receiving the response.
# WARNING: Invalid value for this property can result in
# the resources becoming inaccessible.
com.sun.am.receive_timeout = 0
# The following property in milliseconds indicates how long the
# socket connection needs to be kept open.
# The default value is 0 which implies no timeout.
com.sun.am.connect_timeout = 0
# This property determines the amount of time (in minutes) after which
# the agent polls whether the primary server is up and running.
# The default value is 5 minutes
com.sun.am.poll_primary_server = 5
# Indicate if the socket option TCP_NODELAY should be enabled.
# Possible values are true or false. Default is false
com.sun.am.tcp_nodelay.enable = false
com.sun.am.policy.agents.config.locale = en_US
# Set the IIS filter priority. The choices are
# HIGH - IIS5 filter priority is HIGH.
# LOW - IIS5 filter priority is LOW.
# MEDIUM - IIS5 filter priority is MEDIUM.
# DEFAULT - IIS5 filter priority is DEFAULT.
com.sun.am.policy.agents.config.iis.filter_priority = HIGH -
[SOLVED] SQLite not working with PHP
For reasons unknown, I cannot get PHP to work properly with SQLite. I have uncommented the "extension=sqlite.so" in /etc/php/php.ini, ensured that PHP's configuration was being loaded from said file, and made sure PHP was working fine with my server of choice (lighttpd). Unfortunately, it doesn't seem to work, as evidenced by
Fatal error: Call to undefined function sqlite_open() in test.php on line x
Which is what PHP spits at me. I've checked lighty's logs and nothing's wrong. PHP's set to send to syslog, so I'm not sure where I could check on that. Here is a quick look at PHP's setup.
My /etc/php/php.ini:
[PHP]
; About php.ini ;
; This file controls many aspects of PHP's behavior. In order for PHP to
; read it, it must be named 'php.ini'. PHP looks for it in the current
; working directory, in the path designated by the environment variable
; PHPRC, and in the path that was defined in compile time (in that order).
; The path in which the php.ini file is looked for can be overridden using
; the -c argument in command line mode.
; The syntax of the file is extremely simple. Whitespace and Lines
; beginning with a semicolon are silently ignored (as you probably guessed).
; Section headers (e.g. [Foo]) are also silently ignored, even though
; they might mean something in the future.
; Directives are specified using the following syntax:
; directive = value
; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
; Expressions in the INI file are limited to bitwise operators and parentheses:
; | bitwise OR
; & bitwise AND
; ~ bitwise NOT
; ! boolean NOT
; Boolean flags can be turned on using the values 1, On, True or Yes.
; They can be turned off using the values 0, Off, False or No.
; An empty string can be denoted by simply not writing anything after the equal
; sign, or by using the None keyword:
; foo = ; sets foo to an empty string
; foo = none ; sets foo to an empty string
; foo = "none" ; sets foo to the string 'none'
; If you use constants in your value, and these constants belong to a
; dynamically loaded extension (either a PHP extension or a Zend extension),
; you may only use these constants *after* the line that loads the extension.
; About this file ;
; This is the recommended, PHP 5-style version of the php.ini-dist file. It
; sets some non standard settings, that make PHP more efficient, more secure,
; and encourage cleaner coding.
; The price is that with these settings, PHP may be incompatible with some
; applications, and sometimes, more difficult to develop with. Using this
; file is warmly recommended for production sites. As all of the changes from
; the standard settings are thoroughly documented, you can go over each one,
; and decide whether you want to use it or not.
; For general information about the php.ini file, please consult the php.ini-dist
; file, included in your PHP distribution.
; This file is different from the php.ini-dist file in the fact that it features
; different values for several directives, in order to improve performance, while
; possibly breaking compatibility with the standard out-of-the-box behavior of
; PHP. Please make sure you read what's different, and modify your scripts
; accordingly, if you decide to use this file instead.
; - register_long_arrays = Off [Performance]
; Disables registration of the older (and deprecated) long predefined array
; variables ($HTTP_*_VARS). Instead, use the superglobals that were
; introduced in PHP 4.1.0
; - display_errors = Off [Security]
; With this directive set to off, errors that occur during the execution of
; scripts will no longer be displayed as a part of the script output, and thus,
; will no longer be exposed to remote users. With some errors, the error message
; content may expose information about your script, web server, or database
; server that may be exploitable for hacking. Production sites should have this
; directive set to off.
; - log_errors = On [Security]
; This directive complements the above one. Any errors that occur during the
; execution of your script will be logged (typically, to your server's error log,
; but can be configured in several ways). Along with setting display_errors to off,
; this setup gives you the ability to fully understand what may have gone wrong,
; without exposing any sensitive information to remote users.
; - output_buffering = 4096 [Performance]
; Set a 4KB output buffer. Enabling output buffering typically results in less
; writes, and sometimes less packets sent on the wire, which can often lead to
; better performance. The gain this directive actually yields greatly depends
; on which Web server you're working with, and what kind of scripts you're using.
; - register_argc_argv = Off [Performance]
; Disables registration of the somewhat redundant $argv and $argc global
; variables.
; - magic_quotes_gpc = Off [Performance]
; Input data is no longer escaped with slashes so that it can be sent into
; SQL databases without further manipulation. Instead, you should use the
; database vendor specific escape string function on each input element you
; wish to send to a database.
; - variables_order = "GPCS" [Performance]
; The environment variables are not hashed into the $_ENV. To access
; environment variables, you can use getenv() instead.
; - error_reporting = E_ALL [Code Cleanliness, Security(?)]
; By default, PHP suppresses errors of type E_NOTICE. These error messages
; are emitted for non-critical errors, but that could be a symptom of a bigger
; problem. Most notably, this will cause error messages about the use
; of uninitialized variables to be displayed.
; - allow_call_time_pass_reference = Off [Code cleanliness]
; It's not possible to decide to force a variable to be passed by reference
; when calling a function. The PHP 4 style to do this is by making the
; function require the relevant argument by reference.
; - short_open_tag = Off [Portability]
; Using short tags is discouraged when developing code meant for redistribution
; since short tags may not be supported on the target server.
; Language Options ;
; Enable the PHP scripting language engine under Apache.
engine = On
; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
zend.ze1_compatibility_mode = Off
; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized.
; NOTE: Using short tags should be avoided when developing applications or
; libraries that are meant for redistribution, or deployment on PHP
; servers which are not under your control, because short tags may not
; be supported on the target server. For portable, redistributable code,
; be sure not to use short tags.
short_open_tag = Off
; Allow ASP-style <% %> tags.
asp_tags = Off
; The number of significant digits displayed in floating point numbers.
precision = 14
; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
y2k_compliance = On
; Output buffering allows you to send header lines (including cookies) even
; after you send body content, at the price of slowing PHP's output layer a
; bit. You can enable output buffering during runtime by calling the output
; buffering functions. You can also enable output buffering for all files by
; setting this directive to On. If you wish to limit the size of the buffer
; to a certain size - you can use a maximum number of bytes instead of 'On', as
; a value for this directive (e.g., output_buffering=4096).
output_buffering = 4096
; You can redirect all of the output of your scripts to a function. For
; example, if you set output_handler to "mb_output_handler", character
; encoding will be transparently converted to the specified encoding.
; Setting any output handler automatically turns on output buffering.
; Note: People who wrote portable scripts should not depend on this ini
; directive. Instead, explicitly set the output handler using ob_start().
; Using this ini directive may cause problems unless you know what script
; is doing.
; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
; Note: output_handler must be empty if this is set 'On' !!!!
; Instead you must use zlib.output_handler.
;output_handler =
; Transparent output compression using the zlib library
; Valid values for this option are 'off', 'on', or a specific buffer size
; to be used for compression (default is 4KB)
; Note: Resulting chunk size may vary due to nature of compression. PHP
; outputs chunks that are few hundreds bytes each as a result of
; compression. If you prefer a larger chunk size for better
; performance, enable output_buffering in addition.
; Note: You need to use zlib.output_handler instead of the standard
; output_handler, or otherwise the output will be corrupted.
zlib.output_compression = Off
;zlib.output_compression_level = -1
; You cannot specify additional output handlers if zlib.output_compression
; is activated here. This setting does the same as output_handler but in
; a different order.
;zlib.output_handler =
; Implicit flush tells PHP to tell the output layer to flush itself
; automatically after every output block. This is equivalent to calling the
; PHP function flush() after each and every call to print() or echo() and each
; and every HTML block. Turning this option on has serious performance
; implications and is generally recommended for debugging purposes only.
implicit_flush = Off
; The unserialize callback function will be called (with the undefined class'
; name as parameter), if the unserializer finds an undefined class
; which should be instantiated.
; A warning appears if the specified function is not defined, or if the
; function doesn't include/implement the missing class.
; So only set this entry, if you really want to implement such a
; callback-function.
unserialize_callback_func=
; When floats & doubles are serialized store serialize_precision significant
; digits after the floating point. The default value ensures that when floats
; are decoded with unserialize, the data will remain the same.
serialize_precision = 100
; Whether to enable the ability to force arguments to be passed by reference
; at function call time. This method is deprecated and is likely to be
; unsupported in future versions of PHP/Zend. The encouraged method of
; specifying which arguments should be passed by reference is in the function
; declaration. You're encouraged to try and turn this option Off and make
; sure your scripts work properly with it in order to ensure they will work
; with future versions of the language (you will receive a warning each time
; you use this feature, and the argument will be passed by value instead of by
; reference).
allow_call_time_pass_reference = Off
; Safe Mode
safe_mode = Off
; By default, Safe Mode does a UID compare check when
; opening files. If you want to relax this to a GID compare,
; then turn on safe_mode_gid.
safe_mode_gid = Off
; When safe_mode is on, UID/GID checks are bypassed when
; including files from this directory and its subdirectories.
; (directory must also be in include_path or full path must
; be used when including)
safe_mode_include_dir =
; When safe_mode is on, only executables located in the safe_mode_exec_dir
; will be allowed to be executed via the exec family of functions.
safe_mode_exec_dir =
; Setting certain environment variables may be a potential security breach.
; This directive contains a comma-delimited list of prefixes. In Safe Mode,
; the user may only alter environment variables whose names begin with the
; prefixes supplied here. By default, users will only be able to set
; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
; Note: If this directive is empty, PHP will let the user modify ANY
; environment variable!
safe_mode_allowed_env_vars = PHP_
; This directive contains a comma-delimited list of environment variables that
; the end user won't be able to change using putenv(). These variables will be
; protected even if safe_mode_allowed_env_vars is set to allow to change them.
safe_mode_protected_env_vars = LD_LIBRARY_PATH
; open_basedir, if set, limits all file operations to the defined directory
; and below. This directive makes most sense if used in a per-directory
; or per-virtualhost web server configuration file. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
open_basedir = /srv/http/:/home/:/tmp/:/usr/share/pear/
; This directive allows you to disable certain functions for security reasons.
; It receives a comma-delimited list of function names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
disable_functions =
; This directive allows you to disable certain classes for security reasons.
; It receives a comma-delimited list of class names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
disable_classes =
; Colors for Syntax Highlighting mode. Anything that's acceptable in
; <span style="color: ???????"> would work.
;highlight.string = #DD0000
;highlight.comment = #FF9900
;highlight.keyword = #007700
;highlight.bg = #FFFFFF
;highlight.default = #0000BB
;highlight.html = #000000
; If enabled, the request will be allowed to complete even if the user aborts
; the request. Consider enabling it if executing long request, which may end up
; being interrupted by the user or a browser timing out.
; ignore_user_abort = On
; Determines the size of the realpath cache to be used by PHP. This value should
; be increased on systems where PHP opens many files to reflect the quantity of
; the file operations performed.
; realpath_cache_size=16k
; Duration of time, in seconds for which to cache realpath information for a given
; file or directory. For systems with rarely changing files, consider increasing this
; value.
; realpath_cache_ttl=120
; Misc
; Decides whether PHP may expose the fact that it is installed on the server
; (e.g. by adding its signature to the Web server header). It is no security
; threat in any way, but it makes it possible to determine whether you use PHP
; on your server or not.
expose_php = Off
; Resource Limits ;
max_execution_time = 30 ; Maximum execution time of each script, in seconds
max_input_time = 60 ; Maximum amount of time each script may spend parsing request data
;max_input_nesting_level = 64 ; Maximum input variable nesting level
memory_limit = 32M ; Maximum amount of memory a script may consume (32MB)
; Error handling and logging ;
; error_reporting is a bit-field. Or each number up to get desired error
; reporting level
; E_ALL - All errors and warnings (doesn't include E_STRICT)
; E_ERROR - fatal run-time errors
; E_RECOVERABLE_ERROR - almost fatal run-time errors
; E_WARNING - run-time warnings (non-fatal errors)
; E_PARSE - compile-time parse errors
; E_NOTICE - run-time notices (these are warnings which often result
; from a bug in your code, but it's possible that it was
; intentional (e.g., using an uninitialized variable and
; relying on the fact it's automatically initialized to an
; empty string)
; E_STRICT - run-time notices, enable to have PHP suggest changes
; to your code which will ensure the best interoperability
; and forward compatibility of your code
; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
; initial startup
; E_COMPILE_ERROR - fatal compile-time errors
; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
; E_USER_ERROR - user-generated error message
; E_USER_WARNING - user-generated warning message
; E_USER_NOTICE - user-generated notice message
; Examples:
; - Show all errors, except for notices and coding standards warnings
;error_reporting = E_ALL & ~E_NOTICE
; - Show all errors, except for notices
;error_reporting = E_ALL & ~E_NOTICE | E_STRICT
; - Show only errors
;error_reporting = E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR
; - Show all errors, except coding standards warnings
error_reporting = E_ALL
; Print out errors (as a part of the output). For production web sites,
; you're strongly encouraged to turn this feature off, and use error logging
; instead (see below). Keeping display_errors enabled on a production web site
; may reveal security information to end users, such as file paths on your Web
; server, your database schema or other information.
; possible values for display_errors:
; Off - Do not display any errors
; stderr - Display errors to STDERR (affects only CGI/CLI binaries!)
; On or stdout - Display errors to STDOUT (default)
; To output errors to STDERR with CGI/CLI:
;display_errors = "stderr"
; Default
display_errors = On
; Even when display_errors is on, errors that occur during PHP's startup
; sequence are not displayed. It's strongly recommended to keep
; display_startup_errors off, except for when debugging.
display_startup_errors = Off
; Log errors into a log file (server-specific log, stderr, or error_log (below))
; As stated above, you're strongly advised to use error logging in place of
; error displaying on production web sites.
log_errors = On
; Set maximum length of log_errors. In error_log information about the source is
; added. The default is 1024 and 0 allows to not apply any maximum length at all.
log_errors_max_len = 1024
; Do not log repeated messages. Repeated errors must occur in same file on same
; line unless ignore_repeated_source is set true.
ignore_repeated_errors = Off
; Ignore source of message when ignoring repeated messages. When this setting
; is On you will not log errors with repeated messages from different files or
; source lines.
ignore_repeated_source = Off
; If this parameter is set to Off, then memory leaks will not be shown (on
; stdout or in the log). This has only effect in a debug compile, and if
; error reporting includes E_WARNING in the allowed list
report_memleaks = Off
;report_zend_debug = 0
; Store the last error/warning message in $php_errormsg (boolean).
track_errors = Off
; Turn off normal error reporting and emit XML-RPC error XML
;xmlrpc_errors = 0
; An XML-RPC faultCode
;xmlrpc_error_number = 0
; Disable the inclusion of HTML tags in error messages.
; Note: Never use this feature for production boxes.
;html_errors = Off
; If html_errors is set On PHP produces clickable error messages that direct
; to a page describing the error or function causing the error in detail.
; You can download a copy of the PHP manual from http://www.php.net/docs.php
; and change docref_root to the base URL of your local copy including the
; leading '/'. You must also specify the file extension being used including
; the dot.
; Note: Never use this feature for production boxes.
;docref_root = "/phpmanual/"
;docref_ext = .html
; String to output before an error message.
;error_prepend_string = "<font color=#ff0000>"
; String to output after an error message.
;error_append_string = "</font>"
; Log errors to specified file.
;error_log = filename
; Log errors to syslog.
error_log = syslog
; Data Handling ;
; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
; The separator used in PHP generated URLs to separate arguments.
; Default is "&".
;arg_separator.output = "&"
; List of separator(s) used by PHP to parse input URLs into variables.
; Default is "&".
; NOTE: Every character in this directive is considered as separator!
;arg_separator.input = ";&"
; This directive describes the order in which PHP registers GET, POST, Cookie,
; Environment and Built-in variables (G, P, C, E & S respectively, often
; referred to as EGPCS or GPC). Registration is done from left to right, newer
; values override older values.
variables_order = "GPCS"
; Whether or not to register the EGPCS variables as global variables. You may
; want to turn this off if you don't want to clutter your scripts' global scope
; with user data. This makes most sense when coupled with track_vars - in which
; case you can access all of the GPC variables through the $HTTP_*_VARS[],
; variables.
; You should do your best to write your scripts so that they do not require
; register_globals to be on; Using form variables as globals can easily lead
; to possible security problems, if the code is not very well thought of.
register_globals = Off
; Whether or not to register the old-style input arrays, HTTP_GET_VARS
; and friends. If you're not using them, it's recommended to turn them off,
; for performance reasons.
register_long_arrays = Off
; This directive tells PHP whether to declare the argv&argc variables (that
; would contain the GET information). If you don't use these variables, you
; should turn it off for increased performance.
register_argc_argv = Off
; When enabled, the SERVER and ENV variables are created when they're first
; used (Just In Time) instead of when the script starts. If these variables
; are not used within a script, having this directive on will result in a
; performance gain. The PHP directives register_globals, register_long_arrays,
; and register_argc_argv must be disabled for this directive to have any affect.
auto_globals_jit = On
; Maximum size of POST data that PHP will accept.
post_max_size = 8M
; Magic quotes
; Magic quotes for incoming GET/POST/Cookie data.
magic_quotes_gpc = Off
; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
magic_quotes_runtime = Off
; Use Sybase-style magic quotes (escape ' with '' instead of \').
magic_quotes_sybase = Off
; Automatically add files before or after any PHP document.
auto_prepend_file =
auto_append_file =
; As of 4.0b4, PHP always outputs a character encoding by default in
; the Content-type: header. To disable sending of the charset, simply
; set it to be empty.
; PHP's built-in default is text/html
default_mimetype = "text/html"
default_charset = "utf-8"
; Always populate the $HTTP_RAW_POST_DATA variable.
;always_populate_raw_post_data = On
; Paths and Directories ;
; UNIX: "/path1:/path2"
include_path = ".:/usr/share/pear"
; The root of the PHP pages, used only if nonempty.
; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
; if you are running php as a CGI under any web server (other than IIS)
; see documentation for security issues. The alternate is to use the
; cgi.force_redirect configuration below
doc_root =
; The directory under which PHP opens the script using /~username used only
; if nonempty.
user_dir =
; Directory in which the loadable extensions (modules) reside.
extension_dir = "/usr/lib/php/20060613/"
; Whether or not to enable the dl() function. The dl() function does NOT work
; properly in multithreaded servers, such as IIS or Zeus, and is automatically
; disabled on them.
enable_dl = Off
; cgi.force_redirect is necessary to provide security running PHP as a CGI under
; most web servers. Left undefined, PHP turns this on by default. You can
; turn it off here AT YOUR OWN RISK
; **You CAN safely turn this off for IIS, in fact, you MUST.**
; cgi.force_redirect = 1
; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
; every request.
; cgi.nph = 1
; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
; will look for to know it is OK to continue execution. Setting this variable MAY
; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
; cgi.redirect_status_env = ;
; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
; this to 1 will cause PHP CGI to fix it's paths to conform to the spec. A setting
; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
cgi.fix_pathinfo=1
; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
; security tokens of the calling client. This allows IIS to define the
; security context that the request runs under. mod_fastcgi under Apache
; does not currently support this feature (03/17/2002)
; Set to 1 if running under IIS. Default is zero.
; fastcgi.impersonate = 1;
; Disable logging through FastCGI connection
; fastcgi.logging = 0
; cgi.rfc2616_headers configuration option tells PHP what type of headers to
; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
; is supported by Apache. When this option is set to 1 PHP will send
; RFC2616 compliant header.
; Default is zero.
;cgi.rfc2616_headers = 0
; File Uploads ;
; Whether to allow HTTP file uploads.
file_uploads = On
; Temporary directory for HTTP uploaded files (will use system default if not
; specified).
;upload_tmp_dir =
; Maximum allowed size for uploaded files.
upload_max_filesize = 2M
; Fopen wrappers ;
; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
allow_url_fopen = Off
; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
allow_url_include = Off
; Define the anonymous ftp password (your email address)
;from="[email protected]"
; Define the User-Agent string
; user_agent="PHP"
; Default timeout for socket based streams (seconds)
default_socket_timeout = 60
; Dynamic Extensions ;
; If you wish to have an extension loaded automatically, use the following
; syntax:
; extension=modulename.extension
; For example, under UNIX:
; extension=msql.so
; Note that it should be the name of the module only; no directory information
; needs to go here. Specify the location of the extension with the
; extension_dir directive above.
; Module Settings ;
[Date]
; Defines the default timezone used by the date functions
;date.timezone =
;date.default_latitude = 31.7667
;date.default_longitude = 35.2333
;date.sunrise_zenith = 90.583333
;date.sunset_zenith = 90.583333
[filter]
;filter.default = unsafe_raw
;filter.default_flags =
[iconv]
;iconv.input_encoding = ISO-8859-1
;iconv.internal_encoding = ISO-8859-1
;iconv.output_encoding = ISO-8859-1
[sqlite]
sqlite.assoc_case = 1
[Pcre]
;PCRE library backtracking limit.
;pcre.backtrack_limit=100000
;PCRE library recursion limit.
;Please note that if you set this value to a high number you may consume all
;the available process stack and eventually crash PHP (due to reaching the
;stack size limit imposed by the Operating System).
;pcre.recursion_limit=100000
[Syslog]
; Whether or not to define the various syslog variables (e.g. $LOG_PID,
; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
; runtime, you can define these variables by calling define_syslog_variables().
define_syslog_variables = Off
[mail function]
; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
;sendmail_path =
; Force the addition of the specified parameters to be passed as extra parameters
; to the sendmail binary. These parameters will always replace the value of
; the 5th parameter to mail(), even in safe mode.
;mail.force_extra_parameters =
[SQL]
sql.safe_mode = Off
[ODBC]
;odbc.default_db = Not yet implemented
;odbc.default_user = Not yet implemented
;odbc.default_pw = Not yet implemented
; Allow or prevent persistent links.
odbc.allow_persistent = On
; Check that a connection is still valid before reuse.
odbc.check_persistent = On
; Maximum number of persistent links. -1 means no limit.
odbc.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.
odbc.max_links = -1
; Handling of LONG fields. Returns number of bytes to variables. 0 means
; passthru.
odbc.defaultlrl = 4096
; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
; of uodbc.defaultlrl and uodbc.defaultbinmode
odbc.defaultbinmode = 1
[MySQL]
; Allow or prevent persistent links.
mysql.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
mysql.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.
mysql.max_links = -1
; Default port number for mysql_connect(). If unset, mysql_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order).
mysql.default_port =
; Default socket name for local MySQL connects. If empty, uses the built-in
; MySQL defaults.
mysql.default_socket =
; Default host for mysql_connect() (doesn't apply in safe mode).
mysql.default_host =
; Default user for mysql_connect() (doesn't apply in safe mode).
mysql.default_user =
; Default password for mysql_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
; and reveal this password! And of course, any users with read access to this
; file will be able to reveal the password as well.
mysql.default_password =
; Maximum time (in seconds) for connect timeout. -1 means no limit
mysql.connect_timeout = 60
; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
; SQL-Errors will be displayed.
mysql.trace_mode = Off
[MySQLi]
; Maximum number of links. -1 means no limit.
mysqli.max_links = -1
; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order).
mysqli.default_port = 3306
; Default socket name for local MySQL connects. If empty, uses the built-in
; MySQL defaults.
mysqli.default_socket =
; Default host for mysql_connect() (doesn't apply in safe mode).
mysqli.default_host =
; Default user for mysql_connect() (doesn't apply in safe mode).
mysqli.default_user =
; Default password for mysqli_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
; and reveal this password! And of course, any users with read access to this
; file will be able to reveal the password as well.
mysqli.default_pw =
; Allow or prevent reconnect
mysqli.reconnect = Off
[mSQL]
; Allow or prevent persistent links.
msql.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
msql.max_persistent = -1
; Maximum number of links (persistent+non persistent). -1 means no limit.
msql.max_links = -1
[OCI8]
; enables privileged connections using external credentials (OCI_SYSOPER, OCI_SYSDBA)
;oci8.privileged_connect = Off
; Connection: The maximum number of persistent OCI8 connections per
; process. Using -1 means no limit.
;oci8.max_persistent = -1
; Connection: The maximum number of seconds a process is allowed to
; maintain an idle persistent connection. Using -1 means idle
; persistent connections will be maintained forever.
;oci8.persistent_timeout = -1
; Connection: The number of seconds that must pass before issuing a
; ping during oci_pconnect() to check the connection validity. When
; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
; pings completely.
;oci8.ping_interval = 60
; Tuning: This option enables statement caching, and specifies how
; many statements to cache. Using 0 disables statement caching.
;oci8.statement_cache_size = 20
; Tuning: Enables statement prefetching and sets the default number of
; rows that will be fetched automatically after statement execution.
;oci8.default_prefetch = 10
; Compatibility. Using On means oci_close() will not close
; oci_connect() and oci_new_connect() connections.
;oci8.old_oci_close_semantics = Off
[PostgresSQL]
; Allow or prevent persistent links.
pgsql.allow_persistent = On
; Detect broken persistent links always with pg_pconnect().
; Auto reset feature requires a little overheads.
pgsql.auto_reset_persistent = Off
; Maximum number of persistent links. -1 means no limit.
pgsql.max_persistent = -1
; Maximum number of links (persistent+non persistent). -1 means no limit.
pgsql.max_links = -1
; Ignore PostgreSQL backends Notice message or not.
; Notice message logging require a little overheads.
pgsql.ignore_notice = 0
; Log PostgreSQL backends Notice message or not.
; Unless pgsql.ignore_notice=0, module cannot log notice message.
pgsql.log_notice = 0
[Sybase]
; Allow or prevent persistent links.
sybase.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
sybase.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.
sybase.max_links = -1
;sybase.interface_file = "/usr/sybase/interfaces"
; Minimum error severity to display.
sybase.min_error_severity = 10
; Minimum message severity to display.
sybase.min_message_severity = 10
; Compatibility mode with old versions of PHP 3.0.
; If on, this will cause PHP to automatically assign types to results according
; to their Sybase type, instead of treating them all as strings. This
; compatibility mode will probably not stay around forever, so try applying
; whatever necessary changes to your code, and turn it off.
sybase.compatability_mode = Off
[Sybase-CT]
; Allow or prevent persistent links.
sybct.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
sybct.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.
sybct.max_links = -1
; Minimum server message severity to display.
sybct.min_server_severity = 10
; Minimum client message severity to display.
sybct.min_client_severity = 10
[bcmath]
; Number of decimal digits for all bcmath functions.
bcmath.scale = 0
[browscap]
;browscap = extra/browscap.ini
[Informix]
; Default host for ifx_connect() (doesn't apply in safe mode).
ifx.default_host =
; Default user for ifx_connect() (doesn't apply in safe mode).
ifx.default_user =
; Default password for ifx_connect() (doesn't apply in safe mode).
ifx.default_password =
; Allow or prevent persistent links.
ifx.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
ifx.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.
ifx.max_links = -1
; If on, select statements return the contents of a text blob instead of its id.
ifx.textasvarchar = 0
; If on, select statements return the contents of a byte blob instead of its id.
ifx.byteasvarchar = 0
; Trailing blanks are stripped from fixed-length char columns. May help the
; life of Informix SE users.
ifx.charasvarchar = 0
; If on, the contents of text and byte blobs are dumped to a file instead of
; keeping them in memory.
ifx.blobinfile = 0
; NULL's are returned as empty strings, unless this is set to 1. In that case,
; NULL's are returned as string 'NULL'.
ifx.nullformat = 0
[Session]
; Handler used to store/retrieve data.
session.save_handler = files
; Argument passed to save_handler. In the case of files, this is the path
; where data files are stored.
; As of PHP 4.0.1, you can define the path as:
; session.save_path = "N;/path"
; where N is an integer. Instead of storing all the session files in
; /path, what this will do is use subdirectories N-levels deep, and
; store the session data in those directories. This is useful if you
; or your OS have problems with lots of files in one directory, and is
; a more efficient layout for servers that handle lots of sessions.
; NOTE 1: PHP will not create this directory structure automatically.
; You can use the script in the ext/session dir for that purpose.
; NOTE 2: See the section on garbage collection below if you choose to
; use subdirectories for session storage
; The file storage module creates files using mode 600 by default.
; You can change that by using
; session.save_path = "N;MODE;/path"
; where MODE is the octal representation of the mode. Note that this
; does not overwrite the process's umask.
session.save_path = "/tmp"
; Whether to use cookies.
session.use_cookies = 1
;session.cookie_secure =
; This option enables administrators to make their users invulnerable to
; attacks which involve passing session ids in URLs; defaults to 0.
; session.use_only_cookies = 1
; Name of the session (used as cookie name).
session.name = PHPSESSID
; Initialize session on request startup.
session.auto_start = 0
; Lifetime in seconds of cookie or, if 0, until browser is restarted.
session.cookie_lifetime = 0
; The path for which the cookie is valid.
session.cookie_path = /
; The domain for which the cookie is valid.
session.cookie_domain =
; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
session.cookie_httponly =
; Handler used to serialize data. php is the standard serializer of PHP.
session.serialize_handler = php
; Define the probability that the 'garbage collection' process is started
; on every session initialization.
; The probability is calculated by using gc_probability/gc_divisor,
; e.g. 1/100 means there is a 1% chance that the GC process starts
; on each request.
session.gc_probability = 1
session.gc_divisor = 1000
; After this number of seconds, stored data will be seen as 'garbage' and
; cleaned up by the garbage collection process.
session.gc_maxlifetime = 1440
; NOTE: If you are using the subdirectory option for storing session files
; (see session.save_path above), then garbage collection does *not*
; happen automatically. You will need to do your own garbage
; collection through a shell script, cron entry, or some other method.
; For example, the following script would is the equivalent of
; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
; cd /path/to/sessions; find -cmin +24 | xargs rm
; PHP 4.2 and less have an undocumented feature/bug that allows you to
; to initialize a session variable in the global scope, albeit register_globals
; is disabled. PHP 4.3 and later will warn you, if this feature is used.
; You can disable the feature and the warning separately. At this time,
; the warning is only displayed, if bug_compat_42 is enabled.
session.bug_compat_42 = 0
session.bug_compat_warn = 1
; Check HTTP Referer to invalidate externally stored URLs containing ids.
; HTTP_REFERER has to contain this substring for the session to be
; considered as valid.
session.referer_check =
; How many bytes to read from the file.
session.entropy_length = 0
; Specified here to create the session id.
session.entropy_file =
;session.entropy_length = 16
;session.entropy_file = /dev/urandom
; Set to {nocache,private,public,} to determine HTTP caching aspects
; or leave this empty to avoid sending anti-caching headers.
session.cache_limiter = nocache
; Document expires after n minutes.
session.cache_expire = 180
; trans sid support is disabled by default.
; Use of trans sid may risk your users security.
; Use this option with caution.
; - User may send URL contains active session ID
; to other person via. email/irc/etc.
; - URL that contains active session ID may be stored
; in publically accessible computer.
; - User may access your site with the same session ID
; always using URL stored in browser's history or bookmarks.
session.use_trans_sid = 0
; Select a hash function
; 0: MD5 (128 bits)
; 1: SHA-1 (160 bits)
session.hash_function = 0
; Define how many bits are stored in each character when converting
; the binary hash data to something readable.
; 4 bits: 0-9, a-f
; 5 bits: 0-9, a-v
; 6 bits: 0-9, a-z, A-Z, "-", ","
session.hash_bits_per_character = 5
; The URL rewriter will look for URLs in a defined set of HTML tags.
; form/fieldset are special; if you include them here, the rewriter will
; add a hidden <input> field with the info which is otherwise appended
; to URLs. If you want XHTML conformity, remove the form entry.
; Note that all valid entries require a "=", even if no value follows.
url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
[MSSQL]
; Allow or prevent persistent links.
mssql.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
mssql.max_persistent = -1
; Maximum number of links (persistent+non persistent). -1 means no limit.
mssql.max_links = -1
; Minimum error severity to display.
mssql.min_error_severity = 10
; Minimum message severity to display.
mssql.min_message_severity = 10
; Compatibility mode with old versions of PHP 3.0.
mssql.compatability_mode = Off
; Connect timeout
;mssql.connect_timeout = 5
; Query timeout
;mssql.timeout = 60
; Valid range 0 - 2147483647. Default = 4096.
;mssql.textlimit = 4096
; Valid range 0 - 2147483647. Default = 4096.
;mssql.textsize = 4096
; Limits the number of records in each batch. 0 = all records in one batch.
;mssql.batchsize = 0
; Specify how datetime and datetim4 columns are returned
; On => Returns data converted to SQL server settings
; Off => Returns values as YYYY-MM-DD hh:mm:ss
;mssql.datetimeconvert = On
; Use NT authentication when connecting to the server
mssql.secure_connection = Off
; Specify max number of processes. -1 = library default
; msdlib defaults to 25
; FreeTDS defaults to 4096
;mssql.max_procs = -1
; Specify client character set.
; If empty or not set the client charset from freetds.comf is used
; This is only used when compiled with FreeTDS
;mssql.charset = "ISO-8859-1"
[Assertion]
; Assert(expr); active by default.
;assert.active = On
; Issue a PHP warning for each failed assertion.
;assert.warning = On
; Don't bail out by default.
;assert.bail = Off
; User-function to be called if an assertion fails.
;assert.callback = 0
; Eval the expression with current error_reporting(). Set to true if you want
; error_reporting(0) around the eval().
;assert.quiet_eval = 0
[COM]
; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
;com.typelib_file =
; allow Distributed-COM calls
;com.allow_dcom = true
; autoregister constants of a components typlib on com_load()
;com.autoregister_typelib = true
; register constants casesensitive
;com.autoregister_casesensitive = false
; show warnings on duplicate constant registrations
;com.autoregister_verbose = true
[mbstring]
; language for internal character representation.
;mbstring.language = Japanese
; internal/script encoding.
; Some encoding cannot work as internal encoding.
; (e.g. SJIS, BIG5, ISO-2022-*)
;mbstring.internal_encoding = EUC-JP
; http input encoding.
;mbstring.http_input = auto
; http output encoding. mb_output_handler must be
; registered as output buffer to function
;mbstring.http_output = SJIS
; enable automatic encoding translation according to
; mbstring.internal_encoding setting. Input chars are
; converted to internal encoding by setting this to On.
; Note: Do _not_ use automatic encoding translation for
; portable libs/applications.
;mbstring.encoding_translation = Off
; automatic encoding detection order.
; auto means
;mbstring.detect_order = auto
; substitute_character used when character cannot be converted
; one from another
;mbstring.substitute_character = none;
; overload(replace) single byte functions by mbstring functions.
; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
; etc. Possible values are 0,1,2,4 or combination of them.
; For example, 7 for overload everything.
; 0: No overload
; 1: Overload mail() function
; 2: Overload str*() functions
; 4: Overload ereg*() functions
;mbstring.func_overload = 0
; enable strict encoding detection.
;mbstring.strict_encoding = Off
[FrontBase]
;fbsql.allow_persistent = On
;fbsql.autocommit = On
;fbsql.show_timestamp_decimals = Off
;fbsql.default_database =
;fbsql.default_database_password =
;fbsql.default_host =
;fbsql.default_password =
;fbsql.default_user = "_SYSTEM"
;fbsql.generate_warnings = Off
;fbsql.max_connections = 128
;fbsql.max_links = 128
;fbsql.max_persistent = -1
;fbsql.max_results = 128
[gd]
; Tell the jpeg decode to libjpeg warnings and try to create
; a gd image. The warning will then be displayed as notices
; disabled by default
;gd.jpeg_ignore_warning = 0
[exif]
; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
; With mbstring support this will automatically be converted into the encoding
; given by corresponding encode setting. When empty mbstring.internal_encoding
; is used. For the decode settings you can distinguish between motorola and
; intel byte order. A decode setting cannot be empty.
;exif.encode_unicode = ISO-8859-15
;exif.decode_unicode_motorola = UCS-2BE
;exif.decode_unicode_intel = UCS-2LE
;exif.encode_jis =
;exif.decode_jis_motorola = JIS
;exif.decode_jis_intel = JIS
[Tidy]
; The path to a default tidy configuration file to use when using tidy
;tidy.default_config = /usr/local/lib/php/default.tcfg
; Should tidy clean and repair output automatically?
; WARNING: Do not use this option if you are generating non-html content
; such as dynamic images
tidy.clean_output = Off
[soap]
; Enables or disables WSDL caching feature.
soap.wsdl_cache_enabled=1
; Sets the directory name where SOAP extension will put cache files.
soap.wsdl_cache_dir="/tmp"
; (time to live) Sets the number of second while cached file will be used
; instead of original one.
soap.wsdl_cache_ttl=86400
; available extensions
;extension=bcmath.so
;extension=bz2.so
;extension=calendar.so
;extension=curl.so
;extension=dba.so
;extension=dbase.so
;extension=exif.so
;extension=ftp.so
;extension=gd.so
extension=gettext.so
;extension=gmp.so
;extension=iconv.so
;extension=imap.so
;extension=json.so
;extension=ldap.so
;extension=mcrypt.so
;extension=mhash.so
;extension=mime_magic.so
;extension=mysql.so
;extension=mysqli.so
;extension=ncurses.so
;extension=odbc.so
;extension=openssl.so
;extension=pdo.so
;extension=pdo_mysql.so
;extension=pdo_odbc.so
;extension=pdo_pgsql.so
;extension=pdo_sqlite.so
;extension=pgsql.so
;extension=posix.so
;extension=pspell.so
extension=session.so
;extension=shmop.so
;extension=snmp.so
;extension=soap.so
extension=sockets.so
extension=sqlite.so
;extension=sysvmsg.so
;extension=sysvsem.so
;extension=sysvshm.so
;extension=tidy.so
;extension=xmlrpc.so
;extension=xsl.so
;extension=zip.so
extension=zlib.so
; Local Variables:
; tab-width: 4
; End:
I've attempted enabling pdo.so and pdo_sqlite.so as well, with no results, making sure to stop lighty and flush all of its processes before checking again.
`php-cgi -m | grep sqlite` does not return anything, either.
The extensions directory (/usr/lib/php/20060613) exists on my system and contains sqlite.so, as expected.
I have no clue what's going on here and would greatly appreciate any help offered.
Last edited by xelados (2009-09-23 04:02:22)After the last update which installed PHP 5.3.0, I'm having a similar problem. PHP fails to recognize any extensions which I've defined in php.ini. PHP itself works just fine, so I'm sure this problem is related to the update of PHP.
Here's my php.ini:
[PHP]
; About php.ini ;
; This file controls many aspects of PHP's behavior. In order for PHP to
; read it, it must be named 'php.ini'. PHP looks for it in the current
; working directory, in the path designated by the environment variable
; PHPRC, and in the path that was defined in compile time (in that order).
; The path in which the php.ini file is looked for can be overridden using
; the -c argument in command line mode.
; The syntax of the file is extremely simple. Whitespace and Lines
; beginning with a semicolon are silently ignored (as you probably guessed).
; Section headers (e.g. [Foo]) are also silently ignored, even though
; they might mean something in the future.
; Directives are specified using the following syntax:
; directive = value
; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
; Expressions in the INI file are limited to bitwise operators and parentheses:
; | bitwise OR
; & bitwise AND
; ~ bitwise NOT
; ! boolean NOT
; Boolean flags can be turned on using the values 1, On, True or Yes.
; They can be turned off using the values 0, Off, False or No.
; An empty string can be denoted by simply not writing anything after the equal
; sign, or by using the None keyword:
; foo = ; sets foo to an empty string
; foo = none ; sets foo to an empty string
; foo = "none" ; sets foo to the string 'none'
; If you use constants in your value, and these constants belong to a
; dynamically loaded extension (either a PHP extension or a Zend extension),
; you may only use these constants *after* the line that loads the extension.
; About this file ;
; This is the recommended, PHP 5-style version of the php.ini-dist file. It
; sets some non standard settings, that make PHP more efficient, more secure,
; and encourage cleaner coding.
; The price is that with these settings, PHP may be incompatible with some
; applications, and sometimes, more difficult to develop with. Using this
; file is warmly recommended for production sites. As all of the changes from
; the standard settings are thoroughly documented, you can go over each one,
; and decide whether you want to use it or not.
; For general information about the php.ini file, please consult the php.ini-dist
; file, included in your PHP distribution.
; This file is different from the php.ini-dist file in the fact that it features
; different values for several directives, in order to improve performance, while
; possibly breaking compatibility with the standard out-of-the-box behavior of
; PHP. Please make sure you read what's different, and modify your scripts
; accordingly, if you decide to use this file instead.
; - register_long_arrays = Off [Performance]
; Disables registration of the older (and deprecated) long predefined array
; variables ($HTTP_*_VARS). Instead, use the superglobals that were
; introduced in PHP 4.1.0
; - display_errors = Off [Security]
; With this directive set to off, errors that occur during the execution of
; scripts will no longer be displayed as a part of the script output, and thus,
; will no longer be exposed to remote users. With some errors, the error message
; content may expose information about your script, web server, or database
; server that may be exploitable for hacking. Production sites should have this
; directive set to off.
; - log_errors = On [Security]
; This directive complements the above one. Any errors that occur during the
; execution of your script will be logged (typically, to your server's error log,
; but can be configured in several ways). Along with setting display_errors to off,
; this setup gives you the ability to fully understand what may have gone wrong,
; without exposing any sensitive information to remote users.
; - output_buffering = 4096 [Performance]
; Set a 4KB output buffer. Enabling output buffering typically results in less
; writes, and sometimes less packets sent on the wire, which can often lead to
; better performance. The gain this directive actually yields greatly depends
; on which Web server you're working with, and what kind of scripts you're using.
; - register_argc_argv = Off [Performance]
; Disables registration of the somewhat redundant $argv and $argc global
; variables.
; - magic_quotes_gpc = Off [Performance]
; Input data is no longer escaped with slashes so that it can be sent into
; SQL databases without further manipulation. Instead, you should use the
; function addslashes() on each input element you wish to send to a database.
; - variables_order = "GPCS" [Performance]
; The environment variables are not hashed into the $_ENV. To access
; environment variables, you can use getenv() instead.
; - error_reporting = E_ALL [Code Cleanliness, Security(?)]
; By default, PHP suppresses errors of type E_NOTICE. These error messages
; are emitted for non-critical errors, but that could be a symptom of a bigger
; problem. Most notably, this will cause error messages about the use
; of uninitialized variables to be displayed.
; - allow_call_time_pass_reference = Off [Code cleanliness]
; It's not possible to decide to force a variable to be passed by reference
; when calling a function. The PHP 4 style to do this is by making the
; function require the relevant argument by reference.
; - short_open_tag = Off [Portability]
; Using short tags is discouraged when developing code meant for redistribution
; since short tags may not be supported on the target server.
; Language Options ;
; Enable the PHP scripting language engine under Apache.
engine = On
; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
zend.ze1_compatibility_mode = Off
; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized.
; NOTE: Using short tags should be avoided when developing applications or
; libraries that are meant for redistribution, or deployment on PHP
; servers which are not under your control, because short tags may not
; be supported on the target server. For portable, redistributable code,
; be sure not to use short tags.
short_open_tag = Off
; Allow ASP-style <% %> tags.
asp_tags = Off
; The number of significant digits displayed in floating point numbers.
precision = 14
; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
y2k_compliance = On
; Output buffering allows you to send header lines (including cookies) even
; after you send body content, at the price of slowing PHP's output layer a
; bit. You can enable output buffering during runtime by calling the output
; buffering functions. You can also enable output buffering for all files by
; setting this directive to On. If you wish to limit the size of the buffer
; to a certain size - you can use a maximum number of bytes instead of 'On', as
; a value for this directive (e.g., output_buffering=4096).
output_buffering = Off
; You can redirect all of the output of your scripts to a function. For
; example, if you set output_handler to "mb_output_handler", character
; encoding will be transparently converted to the specified encoding.
; Setting any output handler automatically turns on output buffering.
; Note: People who wrote portable scripts should not depend on this ini
; directive. Instead, explicitly set the output handler using ob_start().
; Using this ini directive may cause problems unless you know what script
; is doing.
; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
; Note: output_handler must be empty if this is set 'On' !!!!
; Instead you must use zlib.output_handler.
;output_handler =
; Transparent output compression using the zlib library
; Valid values for this option are 'off', 'on', or a specific buffer size
; to be used for compression (default is 4KB)
; Note: Resulting chunk size may vary due to nature of compression. PHP
; outputs chunks that are few hundreds bytes each as a result of
; compression. If you prefer a larger chunk size for better
; performance, enable output_buffering in addition.
; Note: You need to use zlib.output_handler instead of the standard
; output_handler, or otherwise the output will be corrupted.
zlib.output_compression = Off
;zlib.output_compression_level = -1
; You cannot specify additional output handlers if zlib.output_compression
; is activated here. This setting does the same as output_handler but in
; a different order.
;zlib.output_handler =
; Implicit flush tells PHP to tell the output layer to flush itself
; automatically after every output block. This is equivalent to calling the
; PHP function flush() after each and every call to print() or echo() and each
; and every HTML block. Turning this option on has serious performance
; implications and is generally recommended for debugging purposes only.
implicit_flush = Off
; The unserialize callback function will be called (with the undefined class'
; name as parameter), if the unserializer finds an undefined class
; which should be instantiated.
; A warning appears if the specified function is not defined, or if the
; function doesn't include/implement the missing class.
; So only set this entry, if you really want to implement such a
; callback-function.
unserialize_callback_func=
; When floats & doubles are serialized store serialize_precision significant
; digits after the floating point. The default value ensures that when floats
; are decoded with unserialize, the data will remain the same.
serialize_precision = 100
; Whether to enable the ability to force arguments to be passed by reference
; at function call time. This method is deprecated and is likely to be
; unsupported in future versions of PHP/Zend. The encouraged method of
; specifying which arguments should be passed by reference is in the function
; declaration. You're encouraged to try and turn this option Off and make
; sure your scripts work properly with it in order to ensure they will work
; with future versions of the language (you will receive a warning each time
; you use this feature, and the argument will be passed by value instead of by
; reference).
allow_call_time_pass_reference = Off
; Safe Mode
safe_mode = Off
; By default, Safe Mode does a UID compare check when
; opening files. If you want to relax this to a GID compare,
; then turn on safe_mode_gid.
safe_mode_gid = Off
; When safe_mode is on, UID/GID checks are bypassed when
; including files from this directory and its subdirectories.
; (directory must also be in include_path or full path must
; be used when including)
safe_mode_include_dir =
; When safe_mode is on, only executables located in the safe_mode_exec_dir
; will be allowed to be executed via the exec family of functions.
safe_mode_exec_dir =
; Setting certain environment variables may be a potential security breach.
; This directive contains a comma-delimited list of prefixes. In Safe Mode,
; the user may only alter environment variables whose names begin with the
; prefixes supplied here. By default, users will only be able to set
; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
; Note: If this directive is empty, PHP will let the user modify ANY
; environment variable!
safe_mode_allowed_env_vars = PHP_
; This directive contains a comma-delimited list of environment variables that
; the end user won't be able to change using putenv(). These variables will be
; protected even if safe_mode_allowed_env_vars is set to allow to change them.
safe_mode_protected_env_vars = LD_LIBRARY_PATH
; open_basedir, if set, limits all file operations to the defined directory
; and below. This directive makes most sense if used in a per-directory
; or per-virtualhost web server configuration file. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
; open_basedir = /srv/http/:/home/:/tmp/:/usr/share/pear/
; This directive allows you to disable certain functions for security reasons.
; It receives a comma-delimited list of function names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
disable_functions =
; This directive allows you to disable certain classes for security reasons.
; It receives a comma-delimited list of class names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
disable_classes =
; Colors for Syntax Highlighting mode. Anything that's acceptable in
; <span style="color: ???????"> would work.
;highlight.string = #DD0000
;highlight.comment = #FF9900
;highlight.keyword = #007700
;highlight.bg = #FFFFFF
;highlight.default = #0000BB
;highlight.html = #000000
; If enabled, the request will be allowed to complete even if the user aborts
; the request. Consider enabling it if executing long request, which may end up
; being interrupted by the user or a browser timing out.
; ignore_user_abort = On
; Determines the size of the realpath cache to be used by PHP. This value should
; be increased on systems where PHP opens many files to reflect the quantity of
; the file operations performed.
; realpath_cache_size=16k
; Duration of time, in seconds for which to cache realpath information for a given
; file or directory. For systems with rarely changing files, consider increasing this
; value.
; realpath_cache_ttl=120
; Misc
; Decides whether PHP may expose the fact that it is installed on the server
; (e.g. by adding its signature to the Web server header). It is no security
; threat in any way, but it makes it possible to determine whether you use PHP
; on your server or not.
expose_php = Off
; Resource Limits ;
max_execution_time = 120 ; Maximum execution time of each script, in seconds
max_input_time = 120 ; Maximum amount of time each script may spend parsing request data
;max_input_nesting_level = 64 ; Maximum input variable nesting level
memory_limit = 128M ; Maximum amount of memory a script may consume (32MB)
; Error handling and logging ;
; error_reporting is a bit-field. Or each number up to get desired error
; reporting level
; E_ALL - All errors and warnings (doesn't include E_STRICT)
; E_ERROR - fatal run-time errors
; E_RECOVERABLE_ERROR - almost fatal run-time errors
; E_WARNING - run-time warnings (non-fatal errors)
; E_PARSE - compile-time parse errors
; E_NOTICE - run-time notices (these are warnings which often result
; from a bug in your code, but it's possible that it was
; intentional (e.g., using an uninitialized variable and
; relying on the fact it's automatically initialized to an
; empty string)
; E_STRICT - run-time notices, enable to have PHP suggest changes
; to your code which will ensure the best interoperability
; and forward compatibility of your code
; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
; initial startup
; E_COMPILE_ERROR - fatal compile-time errors
; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
; E_USER_ERROR - user-generated error message
; E_USER_WARNING - user-generated warning message
; E_USER_NOTICE - user-generated notice message
; Examples:
; - Show all errors, except for notices and coding standards warnings
;error_reporting = E_ALL & ~E_NOTICE
; - Show all errors, except for notices
;error_reporting = E_ALL & ~E_NOTICE | E_STRICT
; - Show only errors
;error_reporting = E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR
; - Show all errors, except coding standards warnings
error_reporting = E_ALL
; Print out errors (as a part of the output). For production web sites,
; you're strongly encouraged to turn this feature off, and use error logging
; instead (see below). Keeping display_errors enabled on a production web site
; may reveal security information to end users, such as file paths on your Web
; server, your database schema or other information.
; possible values for display_errors:
; Off - Do not display any errors
; stderr - Display errors to STDERR (affects only CGI/CLI binaries!)
; On or stdout - Display errors to STDOUT (default)
; To output errors to STDERR with CGI/CLI:
;display_errors = "stderr"
; Default
display_errors = On
; Even when display_errors is on, errors that occur during PHP's startup
; sequence are not displayed. It's strongly recommended to keep
; display_startup_errors off, except for when debugging.
display_startup_errors = Off
; Log errors into a log file (server-specific log, stderr, or error_log (below))
; As stated above, you're strongly advised to use error logging in place of
; error displaying on production web sites.
log_errors = Off
; Set maximum length of log_errors. In error_log information about the source is
; added. The default is 1024 and 0 allows to not apply any maximum length at all.
log_errors_max_len = 1024
; Do not log repeated messages. Repeated errors must occur in same file on same
; line until ignore_repeated_source is set true.
ignore_repeated_errors = Off
; Ignore source of message when ignoring repeated messages. When this setting
; is On you will not log errors with repeated messages from different files or
; source lines.
ignore_repeated_source = Off
; If this parameter is set to Off, then memory leaks will not be shown (on
; stdout or in the log). This has only effect in a debug compile, and if
; error reporting includes E_WARNING in the allowed list
report_memleaks = Off
;report_zend_debug = 0
; Store the last error/warning message in $php_errormsg (boolean).
track_errors = Off
; Disable the inclusion of HTML tags in error messages.
; Note: Never use this feature for production boxes.
;html_errors = Off
; If html_errors is set On PHP produces clickable error messages that direct
; to a page describing the error or function causing the error in detail.
; You can download a copy of the PHP manual from http://www.php.net/docs.php
; and change docref_root to the base URL of your local copy including the
; leading '/'. You must also specify the file extension being used including
; the dot.
; Note: Never use this feature for production boxes.
;docref_root = "/phpmanual/"
;docref_ext = .html
; String to output before an error message.
;error_prepend_string = "<font color=ff0000>"
; String to output after an error message.
;error_append_string = "</font>"
; Log errors to specified file.
;error_log = filename
; Log errors to syslog.
error_log = syslog
; Data Handling ;
; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
; The separator used in PHP generated URLs to separate arguments.
; Default is "&".
;arg_separator.output = "&"
; List of separator(s) used by PHP to parse input URLs into variables.
; Default is "&".
; NOTE: Every character in this directive is considered as separator!
;arg_separator.input = ";&"
; This directive describes the order in which PHP registers GET, POST, Cookie,
; Environment and Built-in variables (G, P, C, E & S respectively, often
; referred to as EGPCS or GPC). Registration is done from left to right, newer
; values override older values.
variables_order = "GPCS"
; Whether or not to register the EGPCS variables as global variables. You may
; want to turn this off if you don't want to clutter your scripts' global scope
; with user data. This makes most sense when coupled with track_vars - in which
; case you can access all of the GPC variables through the $HTTP_*_VARS[],
; variables.
; You should do your best to write your scripts so that they do not require
; register_globals to be on; Using form variables as globals can easily lead
; to possible security problems, if the code is not very well thought of.
register_globals = Off
; Whether or not to register the old-style input arrays, HTTP_GET_VARS
; and friends. If you're not using them, it's recommended to turn them off,
; for performance reasons.
register_long_arrays = Off
; This directive tells PHP whether to declare the argv&argc variables (that
; would contain the GET information). If you don't use these variables, you
; should turn it off for increased performance.
register_argc_argv = Off
; When enabled, the SERVER and ENV variables are created when they're first
; used (Just In Time) instead of when the script starts. If these variables
; are not used within a script, having this directive on will result in a
; performance gain. The PHP directives register_globals, register_long_arrays,
; and register_argc_argv must be disabled for this directive to have any affect.
auto_globals_jit = On
; Maximum size of POST data that PHP will accept.
post_max_size = 128M
; Magic quotes
; Magic quotes for incoming GET/POST/Cookie data.
magic_quotes_gpc = Off
; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
magic_quotes_runtime = Off
; Use Sybase-style magic quotes (escape ' with '' instead of \').
magic_quotes_sybase = Off
; Automatically add files before or after any PHP document.
auto_prepend_file =
auto_append_file =
; As of 4.0b4, PHP always outputs a character encoding by default in
; the Content-type: header. To disable sending of the charset, simply
; set it to be empty.
; PHP's built-in default is text/html
default_mimetype = "text/html"
;default_charset = "iso-8859-1"
; Always populate the $HTTP_RAW_POST_DATA variable.
;always_populate_raw_post_data = On
; Paths and Directories ;
; UNIX: "/path1:/path2"
;include_path = ".:/usr/share/pear"
; The root of the PHP pages, used only if nonempty.
; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
; if you are running php as a CGI under any web server (other than IIS)
; see documentation for security issues. The alternate is to use the
; cgi.force_redirect configuration below
doc_root =
; The directory under which PHP opens the script using /~username used only
; if nonempty.
user_dir =
; Directory in which the loadable extensions (modules) reside.
extension_dir = "/usr/lib/php/modules/"
; Whether or not to enable the dl() function. The dl() function does NOT work
; properly in multithreaded servers, such as IIS or Zeus, and is automatically
; disabled on them.
enable_dl = Off
; cgi.force_redirect is necessary to provide security running PHP as a CGI under
; most web servers. Left undefined, PHP turns this on by default. You can
; turn it off here AT YOUR OWN RISK
; **You CAN safely turn this off for IIS, in fact, you MUST.**
; cgi.force_redirect = 1
; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
; every request.
; cgi.nph = 1
; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
; will look for to know it is OK to continue execution. Setting this variable MAY
; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
; cgi.redirect_status_env = ;
; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
; this to 1 will cause PHP CGI to fix it's paths to conform to the spec. A setting
; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
; cgi.fix_pathinfo=1
; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
; security tokens of the calling client. This allows IIS to define the
; security context that the request runs under. mod_fastcgi under Apache
; does not currently support this feature (03/17/2002)
; Set to 1 if running under IIS. Default is zero.
; fastcgi.impersonate = 1;
; Disable logging through FastCGI connection
; fastcgi.logging = 0
; cgi.rfc2616_headers configuration option tells PHP what type of headers to
; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
; is supported by Apache. When this option is set to 1 PHP will send
; RFC2616 compliant header.
; Default is zero.
;cgi.rfc2616_headers = 0
; File Uploads ;
; Whether to allow HTTP file uploads.
file_uploads = On
; Temporary directory for HTTP uploaded files (will use system default if not
; specified).
;upload_tmp_dir =
; Maximum allowed size for uploaded files.
upload_max_filesize = 128M
; Fopen wrappers ;
; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
allow_url_fopen = On
; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
allow_url_include = Off
; Define the anonymous ftp password (your email address)
;from="[email protected]"
; Define the User-Agent string
; user_agent="PHP"
; Default timeout for socket based streams (seconds)
default_socket_timeout = 10
; Dynamic Extensions ;
; If you wish to have an extension loaded automatically, use the following
; syntax:
; extension=modulename.extension
; For example, under UNIX:
; extension=msql.so
; Note that it should be the name of the module only; no directory information
; needs to go here. Specify the location of the extension with the
; extension_dir directive above.
; Module Settings ;
[Date]
; Defines the default timezone used by the date functions
;date.timezone =
;date.default_latitude = 31.7667
;date.default_longitude = 35.2333
;date.sunrise_zenith = 90.583333
;date.sunset_zenith = 90.583333
[filter]
;filter.default = unsafe_raw
;filter.default_flags =
[iconv]
;iconv.input_encoding = ISO-8859-1
;iconv.internal_encoding = ISO-8859-1
;iconv.output_encoding = ISO-8859-1
[sqlite]
;sqlite.assoc_case = 0
[xmlrpc]
;xmlrpc_error_number = 0
;xmlrpc_errors = 0
[Pcre]
;PCRE library backtracking limit.
;pcre.backtrack_limit=100000
;PCRE library recursion limit.
;Please note that if you set this value to a high number you may consume all
;the available process stack and eventually crash PHP (due to reaching the
;stack size limit imposed by the Operating System).
;pcre.recursion_limit=100000
[Syslog]
; Whether or not to define the various syslog variables (e.g. $LOG_PID,
; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
; runtime, you can define these variables by calling define_syslog_variables().
define_syslog_variables = Off
[mail function]
; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
;sendmail_path =
; Force the addition of the specified parameters to be passed as extra parameters
; to the sendmail binary. These parameters will always replace the value of
; the 5th parameter to mail(), even in safe mode.
;mail.force_extra_parameters =
[SQL]
sql.safe_mode = Off
[ODBC]
;odbc.default_db = Not yet implemented
;odbc.default_user = Not yet implemented
;odbc.default_pw = Not yet implemented
; Allow or prevent persistent links.
odbc.allow_persistent = On
; Check that a connection is still valid before reuse.
odbc.check_persistent = On
; Maximum number of persistent links. -1 means no limit.
odbc.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.
odbc.max_links = -1
; Handling of LONG fields. Returns number of bytes to variables. 0 means
; passthru.
odbc.defaultlrl = 4096
; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
; of uodbc.defaultlrl and uodbc.defaultbinmode
odbc.defaultbinmode = 1
[MySQL]
; Allow or prevent persistent links.
mysql.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
mysql.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.
mysql.max_links = -1
; Default port number for mysql_connect(). If unset, mysql_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order).
mysql.default_port =
; Default socket name for local MySQL connects. If empty, uses the built-in
; MySQL defaults.
mysql.default_socket =
; Default host for mysql_connect() (doesn't apply in safe mode).
mysql.default_host =
; Default user for mysql_connect() (doesn't apply in safe mode).
mysql.default_user =
; Default password for mysql_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
; and reveal this password! And of course, any users with read access to this
; file will be able to reveal the password as well.
mysql.default_password =
; Maximum time (in seconds) for connect timeout. -1 means no limit
mysql.connect_timeout = 60
; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
; SQL-Errors will be displayed.
mysql.trace_mode = Off
[MySQLi]
; Maximum number of links. -1 means no limit.
mysqli.max_links = -1
; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order).
mysqli.default_port = 3306
; Default socket name for local MySQL connects. If empty, uses the built-in
; MySQL defaults.
mysqli.default_socket =
; Default host for mysql_connect() (doesn't apply in safe mode).
mysqli.default_host =
; Default user for mysql_connect() (doesn't apply in safe mode).
mysqli.default_user =
; Default password for mysqli_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
; and reveal this password! And of course, any users with read access to this
; file will be able to reveal the password as well.
mysqli.default_pw =
; Allow or prevent reconnect
mysqli.reconnect = Off
[mSQL]
; Allow or prevent persistent links.
msql.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
msql.max_persistent = -1
; Maximum number of links (persistent+non persistent). -1 means no limit.
msql.max_links = -1
[OCI8]
; enables privileged connections using external credentials (OCI_SYSOPER, OCI_SYSDBA)
;oci8.privileged_connect = Off
; Connection: The maximum number of persistent OCI8 connections per
; process. Using -1 means no limit.
;oci8.max_persistent = -1
; Connection: The maximum number of seconds a process is allowed to
; maintain an idle persistent connection. Using -1 means idle
; persistent connections will be maintained forever.
;oci8.persistent_timeout = -1
; Connection: The number of seconds that must pass before issuing a
; ping during oci_pconnect() to check the connection validity. When
; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
; pings completely.
;oci8.ping_interval = 60
; Tuning: This option enables statement caching, and specifies how
; many statements to cache. Using 0 disables statement caching.
;oci8.statement_cache_size = 20
; Tuning: Enables statement prefetching and sets the default number of
; rows that will be fetched automatically after statement execution.
;oci8.default_prefetch = 10
; Compatibility. Using On means oci_close() will not close
; oci_connect() and oci_new_connect() connections.
;oci8.old_oci_close_semantics = Off
[PostgresSQL]
; Allow or prevent persistent links.
pgsql.allow_persistent = On
; Detect broken persistent links always with pg_pconnect().
; Auto reset feature requires a little overheads.
pgsql.auto_reset_persistent = Off
; Maximum number of persistent links. -1 means no limit.
pgsql.max_persistent = -1
; Maximum number of links (persistent+non persistent). -1 means no limit.
pgsql.max_links = -1
; Ignore PostgreSQL backends Notice message or not.
; Notice message logging require a little overheads.
pgsql.ignore_notice = 0
; Log PostgreSQL backends Noitce message or not.
; Unless pgsql.ignore_notice=0, module cannot log notice message.
pgsql.log_notice = 0
[Sybase]
; Allow or prevent persistent links.
sybase.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
sybase.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.
sybase.max_links = -1
;sybase.interface_file = "/usr/sybase/interfaces"
; Minimum error severity to display.
sybase.min_error_severity = 10
; Minimum message severity to display.
sybase.min_message_severity = 10
; Compatibility mode with old versions of PHP 3.0.
; If on, this will cause PHP to automatically assign types to results according
; to their Sybase type, instead of treating them all as strings. This
; compatibility mode will probably not stay around forever, so try applying
; whatever necessary changes to your code, and turn it off.
sybase.compatability_mode = Off
[Sybase-CT]
; Allow or prevent persistent links.
sybct.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
sybct.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.
sybct.max_links = -1
; Minimum server message severity to display.
sybct.min_server_severity = 10
; Minimum client message severity to display.
sybct.min_client_severity = 10
[bcmath]
; Number of decimal digits for all bcmath functions.
bcmath.scale = 0
[browscap]
;browscap = extra/browscap.ini
[Informix]
; Default host for ifx_connect() (doesn't apply in safe mode).
ifx.default_host =
; Default user for ifx_connect() (doesn't apply in safe mode).
ifx.default_user =
; Default password for ifx_connect() (doesn't apply in safe mode).
ifx.default_password =
; Allow or prevent persistent links.
ifx.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
ifx.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.
ifx.max_links = -1
; If on, select statements return the contents of a text blob instead of its id.
ifx.textasvarchar = 0
; If on, select statements return the contents of a byte blob instead of its id.
ifx.byteasvarchar = 0
; Trailing blanks are stripped from fixed-length char columns. May help the
; life of Informix SE users.
ifx.charasvarchar = 0
; If on, the contents of text and byte blobs are dumped to a file instead of
; keeping them in memory.
ifx.blobinfile = 0
; NULL's are returned as empty strings, unless this is set to 1. In that case,
; NULL's are returned as string 'NULL'.
ifx.nullformat = 0
[Session]
; Handler used to store/retrieve data.
session.save_handler = files
; Argument passed to save_handler. In the case of files, this is the path
; where data files are stored.
; As of PHP 4.0.1, you can define the path as:
; session.save_path = "N;/path"
; where N is an integer. Instead of storing all the session files in
; /path, what this will do is use subdirectories N-levels deep, and
; store the session data in those directories. This is useful if you
; or your OS have problems with lots of files in one directory, and is
; a more efficient layout for servers that handle lots of sessions.
; NOTE 1: PHP will not create this directory structure automatically.
; You can use the script in the ext/session dir for that purpose.
; NOTE 2: See the section on garbage collection below if you choose to
; use subdirectories for session storage
; The file storage module creates files using mode 600 by default.
; You can change that by using
; session.save_path = "N;MODE;/path"
; where MODE is the octal representation of the mode. Note that this
; does not overwrite the process's umask.
session.save_path = "/www/sessions"
; Whether to use cookies.
session.use_cookies = 1
;session.cookie_secure =
; This option enables administrators to make their users invulnerable to
; attacks which involve passing session ids in URLs; defaults to 0.
session.use_only_cookies = 1
; Name of the session (used as cookie name).
session.name = ServerSessionIdentifier
; Initialize session on request startup.
session.auto_start = 0
; Lifetime in seconds of cookie or, if 0, until browser is restarted.
session.cookie_lifetime = 0
; The path for which the cookie is valid.
session.cookie_path = /
; The domain for which the cookie is valid.
session.cookie_domain =
; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
session.cookie_httponly = 1
; Handler used to serialize data. php is the standard serializer of PHP.
session.serialize_handler = php
; Define the probability that the 'garbage collection' process is started
; on every session initialization.
; The probability is calculated by using gc_probability/gc_divisor,
; e.g. 1/100 means there is a 1% chance that the GC process starts
; on each request.
session.gc_probability = 1
session.gc_divisor = 30
; After this number of seconds, stored data will be seen as 'garbage' and
; cleaned up by the garbage collection process.
session.gc_maxlifetime = 3600
; NOTE: If you are using the subdirectory option for storing session files
; (see session.save_path above), then garbage collection does *not*
; happen automatically. You will need to do your own garbage
; collection through a shell script, cron entry, or some other method.
; For example, the following script would is the equivalent of
; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
; cd /path/to/sessions; find -cmin +24 | xargs rm
; PHP 4.2 and less have an undocumented feature/bug that allows you to
; to initialize a session variable in the global scope, albeit register_globals
; is disabled. PHP 4.3 and later will warn you, if this feature is used.
; You can disable the feature and the warning separately. At this time,
; the warning is only displayed, if bug_compat_42 is enabled.
session.bug_compat_42 = 0
session.bug_compat_warn = 1
; Check HTTP Referer to invalidate externally stored URLs containing ids.
; HTTP_REFERER has to contain this substring for the session to be
; considered as valid.
session.referer_check =
; How many bytes to read from the file.
session.entropy_length = 0
; Specified here to create the session id.
session.entropy_file =
;session.entropy_length = 16
;session.entropy_file = /dev/urandom
; Set to {nocache,private,public,} to determine HTTP caching aspects
; or leave this empty to avoid sending anti-caching headers.
session.cache_limiter = none
; Document expires after n minutes.
session.cache_expire = 0
; trans sid support is disabled by default.
; Use of trans sid may risk your users security.
; Use this option with caution.
; - User may send URL contains active session ID
; to other person via. email/irc/etc.
; - URL that contains active session ID may be stored
; in publically accessible computer.
; - User may access your site with the same session ID
; always using URL stored in browser's history or bookmarks.
session.use_trans_sid = 0
; Select a hash function
; 0: MD5 (128 bits)
; 1: SHA-1 (160 bits)
session.hash_function = 1
; Define how many bits are stored in each character when converting
; the binary hash data to something readable.
; 4 bits: 0-9, a-f
; 5 bits: 0-9, a-v
; 6 bits: 0-9, a-z, A-Z, "-", ","
session.hash_bits_per_character = 6
; The URL rewriter will look for URLs in a defined set of HTML tags.
; form/fieldset are special; if you include them here, the rewriter will
; add a hidden <input> field with the info which is otherwise appended
; to URLs. If you want XHTML conformity, remove the form entry.
; Note that all valid entries require a "=", even if no value follows.
;url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
[MSSQL]
; Allow or prevent persistent links.
mssql.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
mssql.max_persistent = -1
; Maximum number of links (persistent+non persistent). -1 means no limit.
mssql.max_links = -1
; Minimum error severity to display.
mssql.min_error_severity = 10
; Minimum message severity to display.
mssql.min_message_severity = 10
; Compatibility mode with old versions of PHP 3.0.
mssql.compatability_mode = Off
; Connect timeout
;mssql.connect_timeout = 5
; Query timeout
;mssql.timeout = 60
; Valid range 0 - 2147483647. Default = 4096.
;mssql.textlimit = 4096
; Valid range 0 - 2147483647. Default = 4096.
;mssql.textsize = 4096
; Limits the number of records in each batch. 0 = all records in one batch.
;mssql.batchsize = 0
; Specify how datetime and datetim4 columns are returned
; On => Returns data converted to SQL server settings
; Off => Returns values as YYYY-MM-DD hh:mm:ss
;mssql.datetimeconvert = On
; Use NT authentication when connecting to the server
mssql.secure_connection = Off
; Specify max number of processes. -1 = library default
; msdlib defaults to 25
; FreeTDS defaults to 4096
;mssql.max_procs = -1
; Specify client character set.
; If empty or not set the client charset from freetds.comf is used
; This is only used when compiled with FreeTDS
;mssql.charset = "ISO-8859-1"
[Assertion]
; Assert(expr); active by default.
;assert.active = On
; Issue a PHP warning for each failed assertion.
;assert.warning = On
; Don't bail out by default.
;assert.bail = Off
; User-function to be called if an assertion fails.
;assert.callback = 0
; Eval the expression with current error_reporting(). Set to true if you want
; error_reporting(0) around the eval().
;assert.quiet_eval = 0
[COM]
; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
;com.typelib_file =
; allow Distributed-COM calls
;com.allow_dcom = true
; autoregister constants of a components typlib on com_load()
;com.autoregister_typelib = true
; register constants casesensitive
;com.autoregister_casesensitive = false
; show warnings on duplicate constant registrations
;com.autoregister_verbose = true
[mbstring]
; language for internal character representation.
;mbstring.language = Japanese
; internal/script encoding.
; Some encoding cannot work as internal encoding.
; (e.g. SJIS, BIG5, ISO-2022-*)
;mbstring.internal_encoding = EUC-JP
; http input encoding.
;mbstring.http_input = auto
; http output encoding. mb_output_handler must be
; registered as output buffer to function
;mbstring.http_output = SJIS
; enable automatic encoding translation according to
; mbstring.internal_encoding setting. Input chars are
; converted to internal encoding by setting this to On.
; Note: Do _not_ use automatic encoding translation for
; portable libs/applications.
;mbstring.encoding_translation = Off
; automatic encoding detection order.
; auto means
;mbstring.detect_order = auto
; substitute_character used when character cannot be converted
; one from another
;mbstring.substitute_character = none;
; overload(replace) single byte functions by mbstring functions.
; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
; etc. Possible values are 0,1,2,4 or combination of them.
; For example, 7 for overload everything.
; 0: No overload
; 1: Overload mail() function
; 2: Overload str*() functions
; 4: Overload ereg*() functions
;mbstring.func_overload = 0
; enable strict encoding detection.
;mbstring.strict_encoding = Off
[FrontBase]
;fbsql.allow_persistent = On
;fbsql.autocommit = On
;fbsql.show_timestamp_decimals = Off
;fbsql.default_database =
;fbsql.default_database_password =
;fbsql.default_host =
;fbsql.default_password =
;fbsql.default_user = "_SYSTEM"
;fbsql.generate_warnings = Off
;fbsql.max_connections = 128
;fbsql.max_links = 128
;fbsql.max_persistent = -1
;fbsql.max_results = 128
[gd]
; Tell the jpeg decode to libjpeg warnings and try to create
; a gd image. The warning will then be displayed as notices
; disabled by default
;gd.jpeg_ignore_warning = 0
[exif]
; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
; With mbstring support this will automatically be converted into the encoding
; given by corresponding encode setting. When empty mbstring.internal_encoding
; is used. For the decode settings you can distinguish between motorola and
; intel byte order. A decode setting cannot be empty.
;exif.encode_unicode = ISO-8859-15
;exif.decode_unicode_motorola = UCS-2BE
;exif.decode_unicode_intel = UCS-2LE
;exif.encode_jis =
;exif.decode_jis_motorola = JIS
;exif.decode_jis_intel = JIS
[Tidy]
; The path to a default tidy configuration file to use when using tidy
;tidy.default_config = /usr/local/lib/php/default.tcfg
; Should tidy clean and repair output automatically?
; WARNING: Do not use this option if you are generating non-html content
; such as dynamic images
tidy.clean_output = Off
[soap]
; Enables or disables WSDL caching feature.
soap.wsdl_cache_enabled=1
; Sets the directory name where SOAP extension will put cache files.
soap.wsdl_cache_dir="/tmp"
; (time to live) Sets the number of second while cached file will be used
; instead of original one.
soap.wsdl_cache_ttl=86400
; available extensions
;extension=bcmath.so
;extension=bz2.so
;extension=calendar.so
;extension=curl.so
;extension=dba.so
;extension=dbase.so
;extension=exif.so
;extension=ftp.so
extension=gd.so
extension=gettext.so
;extension=iconv.so
;extension=imap.so
;extension=json.so
;extension=ldap.so
extension=mcrypt.so
;extension=mime_magic.so
extension=mysql.so
;extension=mysqli.so
;extension=ncurses.so
;extension=odbc.so
extension=openssl.so
extension=pdo.so
extension=pdo_mysql.so
;extension=pdo_odbc.so
;extension=pdo_pgsql.so
;extension=pdo_sqlite.so
;extension=pgsql.so
;extension=posix.so
;extension=pspell.so
extension=session.so
;extension=shmop.so
;extension=snmp.so
;extension=soap.so
extension=sockets.so
;extension=sqlite.so
;extension=sysvmsg.so
;extension=sysvsem.so
;extension=sysvshm.so
;extension=tidy.so
;extension=xmlrpc.so
;extension=xsl.so
;extension=zip.so
extension=zlib.so
; Local Variables:
; tab-width: 4
; End:
Some more info:
[root@Taurine etc]# php-cgi -m
[PHP Modules]
cgi-fcgi
Core
ctype
date
dom
ereg
fileinfo
filter
gettext
hash
libxml
mbstring
mysql
mysqlnd
openssl
pcre
PDO
pdo_mysql
Reflection
session
SimpleXML
sockets
SPL
standard
tokenizer
xml
xmlreader
xmlwriter
zlib
[Zend Modules]
[root@Taurine etc]# php-cgi -v
PHP 5.3.0 with Suhosin-Patch (cgi-fcgi) (built: Sep 16 2009 13:55:34)
Copyright (c) 1997-2009 The PHP Group
Zend Engine v2.3.0, Copyright (c) 1998-2009 Zend Technologies
[root@Taurine etc]# cd /usr/lib/php/modules/
[root@Taurine modules]# ls -alh
totalt 3,2M
drwxr-xr-x 2 root root 4,0K 16 sep 13.57 .
drwxr-xr-x 4 root root 4,0K 16 sep 13.57 ..
-rwxr-xr-x 1 root root 27K 16 sep 13.57 bcmath.so
-rwxr-xr-x 1 root root 21K 16 sep 13.57 bz2.so
-rwxr-xr-x 1 root root 25K 16 sep 13.57 calendar.so
-rwxr-xr-x 1 root root 51K 16 sep 13.57 dba.so
-rwxr-xr-x 1 root root 52K 16 sep 13.57 exif.so
-rwxr-xr-x 1 root root 46K 16 sep 13.57 ftp.so
-rwxr-xr-x 1 root root 11K 16 sep 13.57 gettext.so
-rwxr-xr-x 1 root root 37K 16 sep 13.57 iconv.so
-rwxr-xr-x 1 root root 1,2M 16 sep 13.57 imap.so
-rwxr-xr-x 1 root root 35K 16 sep 13.57 json.so
-rwxr-xr-x 1 root root 43K 16 sep 13.57 mysql.so
-rwxr-xr-x 1 root root 109K 16 sep 13.57 mysqli.so
-rwxr-xr-x 1 root root 110K 16 sep 13.57 openssl.so
-rwxr-xr-x 1 root root 98K 16 sep 13.57 pdo.so
-rwxr-xr-x 1 root root 24K 16 sep 13.57 pdo_mysql.so
-rwxr-xr-x 1 root root 286K 16 sep 13.57 phar.so
-rwxr-xr-x 1 root root 26K 16 sep 13.57 posix.so
-rwxr-xr-x 1 root root 9,8K 16 sep 13.57 shmop.so
-rwxr-xr-x 1 root root 356K 16 sep 13.57 soap.so
-rwxr-xr-x 1 root root 46K 16 sep 13.57 sockets.so
-rwxr-xr-x 1 root root 355K 16 sep 13.57 sqlite.so
-rwxr-xr-x 1 root root 15K 16 sep 13.57 sysvmsg.so
-rwxr-xr-x 1 root root 8,3K 16 sep 13.57 sysvsem.so
-rwxr-xr-x 1 root root 11K 16 sep 13.57 sysvshm.so
-rwxr-xr-x 1 root root 79K 16 sep 13.57 xmlrpc.so
-rwxr-xr-x 1 root root 79K 16 sep 13.57 zip.so
Last edited by nullvoid (2009-09-22 17:39:47) -
Suggestions for all in one wireless printer to work with iMac
I am looking for a new all in one that will work with my iMac & Airport
About a month ago I got an HP Photosmart Premium c410 AIO (print, copy, scan, fax). I don't remember the price, but I think it was about $200. Wireless setup was easy and it works fine so far. I also use it in a Wi-Fi (Airport) network with a Windows 7 PC and 2 Win 7 laptops; the HP software for Windows is _much_ more user friendly, versatile and faster than the Mac s/w IMHO. The software for it on a 2011 27" Intel iMac running SL is more stripped down and slower to connect, but it works OK. I haven't upgraded the OS to Lion yet due to numerous complaints.
The only gripe is that like most current HP printers, it eats cartridges, even the XL ones. The ePrint function works fine with an iPad (version 1). Print quality is OK for my uses, i.e., letters, photos on plain paper and up to 8.5" X 11" good photo paper).
I also connect to a one-year old HP Photosmart c310 my daughter brought home from college for the summer - seems to be a pretty similar ePrinter, but without the fax capability. This works as well as the c410 near as I can tell. It probably cost about $120. -
'bios serial number' setting no longer working with 11.2.4.1
We recently installed 11.2.4 and monthly update 1 (in 1 evening) and now we've started to notice that our workstations are not getting the proper device name.
We have preboot set to give the workstation the bios serial number as device name (certain A brand ships computers with empty asset tags but has the serial set to the asset tag).
This used to work with 11.2.3 so I am guessing something has changed. There currently does not seem to be a newer imaging set than the one with MU1.
They are getting a windows-XXXXXXX where X is a seemingly random char hostname.
Anyone know what might be up with this or has seen it ?Hi Joshua
I tried a stripped down version with a 3 frame swf simply dropped onto the timeline - the problem does not occur. That means I would have to upload the full movie as it draws multiple slides from an external library and drops them onto the timeline at runtime. This package was developed to replace normal training material and is used widely to train some 120 000 candidates per annum by several companies. As such I cannot therefore post the full movie as I have to protect the code that drives the whole thing.I will have to stick with McGyver fix for the meantime.
As each slide is pulled from a library, and the slide backgrounds from a separate swf library, I think that something new in 11.5 either has a problem with running multiple things at the same time, or has a problem in running a sequence of instructions.
Brian -
PC Suite stops working with Bluetooth after Laptop...
I use PC Suite and Bluetooth to connect to my Phone. I use the Synchronise, and the Messages feature a great deal. It all works great after a reboot, and I think it's a real credit to Nokia that they provide this free and improve their standing compared to other manufacturers.
However, the latest versions of PC Suite have taken a backward step in hardware compatibility. Previously, no matter what state my laptop was in - ie rebooted, returned from hibernate or standby, the laptop would connect to my phone over Bluetooth, and synchronizing would happen. When my phone went out of range, the connection would drop, and when it came back into range, the connection would re-establish and synchronizing would start again - wonderful!
Now, this only works after clean reboot, and after I have manually clicked on "Get Connected". After my laptop returns from standby, if I try "Get Connected" I get the error:
"Cannot use the connection type. Check that all the needed hardware, software and drivers are available. (Code: OpenMedia)"
To get PC Suite working with Bluetooth after returning from standby I run a Repair, after which it works beautifully.
Is this a known fault? I have uninstalled and re-installed PC Suite and the BT Stack as recommended in other posts to solve other issues. My configuration is:
Operating system: Microsoft Windows XP
Nokia PC Suite: Version 6.82.22.0
Bluetooth Stack for Windows by Toshiba v4.00.23(D) SP2
Bluetooth Specification: Version 2.0, 1.2, 1.1
Many thanks...Thanks for your response Miksu. You have pointed me to the right place. It is the connection manager that fails to recognise the BT stack that causes my problems. This is always resolved by a repair. It seems that the order of initiation is very important which may be why Luist has started to have the problem.
In my experience, once things stop to work, I've had to strip out any subsequent installs.
My PCSuite also stopped working after it installed cable connection manager (or something like that) without me asking. I found it in Control Panel->Add/Remove programs. I removed it and PC Suite started to work again, so I completely removed PC Suite then re-installed, and allowed it to add the relevant devices relating to my phone (about 4 devices alltogether) but alas this did not solve my "return from standby" issue. I think I need to remove PC Suite and then Bluetooth, and maybe something else before re-installing - I'll leave that for a rainy day.
Thanks again Miksu -
Lightroom 5.6 "Edit in" with merge won't work with Photoshop Elements 13
I just installed Photoshop Elements 13 to edit photos from Lightroom. A single file will via "Edit in" will work, but all action on multiple files end in "could not start editor", even though the editor does start, it just won't open up any photos. Photomerge will work from files opened in Photoshop Elements, but i really don't want to organize my catalogue in both programs.
All combinations of export settings result in the same, i also deleted my settings again and tested it with another account on my computer.None of my "Edit In" worked with the pictures in Lightroom for a particular folder. I expanded the 2014 folder and found that two subfolders had a "?" in front of the 2014-07-04" and another. In other words, the folder was missing. After I found the missing folders using the Lightroom "Find Missing Folder" option, I was able to use the "Edit In" menu item. The 2014 folders weren't expanded at first, so I didn't see the ? marks in front of them. With the missing folders, Lightroom's "Edit In" option was basically telling me there was no picture to "Edit In." Howerver, I have Previews and Smart Previews made when I import picture files into Lightroom. So, the "pictures" showed in the slide strip on the bottom, and also in the display in "expand," but it was actually only showing the previews I had built, not the actual missing pictures in the missing folders. I had accidentally moved some directories using Windows Explorer, and I didn't realize my "happy fingers" moved them outside of Lightroom. Of course, Lightroom has no way of knowing I moved them, and just shows the "?" before the missing folder name. After expanding the root folder, then knew what to do. Fixed it easily. It was frustrating, and took about 20 minutes to see the problem. And that fixed the greyed-out "Edit In" Photoshop CC 2014, and all the other plug-ins were greyed out too.
Hope this fixes your problem.
Mike -
SCSI Bus doesn't work with OS 10
I recently upgraded my G3 Desktop with a Sonnet G4/500 ZIF Upgrade, a 120 GB Hard Drive and System 10.2.8. I partitioned the drive into three partitions, two less than 8 GB and the third with the remaining. I have been able to install OS 10 and it appears to be working OK, but I can't access my SCSI ZIP Drive or scanner, even when running in classic mode. If I reboot into system 9.2.2, everything works fine. When I run Apple System Profiler, the SCSI chain does not show up. I have the SCSI Chain terminated using the internal terminator on the ZIP Drive. I have also noticed that my USB printer will not print in classic mode, but operates normally (but slow) in OS 10. Is this a common problem? I have gone through several pages of postings and have not seen anyone else with this particular problem.
G3 Desktop w/ZIF G4-500 Upgrade Mac OS X (10.2.x) 348 MB RamMy ZIP drive is a 250. I think I can find an active terminator, so I will try that. As far as turning on the SCSI devices, they come on with the power strip before I boot the computer.
My first hard drive partition, which is where I installed OS 10, has plenty of room. I have only installed items which came on the OS 10 install disk in that partition. I have installed OS9 on the second partition along with most of the applications I use (most are system 9 applications at this point). I have ordered more RAM for the machine, which hopefully will make the printer faster.
Thanks for the feedback. I will respond with the results.
G3 Desktop w/ZIF G4-500 Upgrade Mac OS X (10.2.x) 348 MB Ram
G3 Desktop w/ZIF G4-500 Upgrade Mac OS X (10.2.x) 348 MB Ram -
Firefox command line option "-no-remote" doesn't work with profile.
I want to run the stripped version of firefox in background with one application and another full version of firefox for normal browsing. I have created the profile for the stripped version of firefox and loading the same using command firefox -P "stripped" -no-remote/firefox -no-remote -P "stripped". But when I start the full version of firefox by launcher "firefox" than it directly loads the stripped version even used the -no-remote option with profile. So I have created launcher for firefox and used the -no-remote with default profile like "firefox -no-remote". It works when first time I click on launcher but for second click it shows the message "Firefox instance is running, or not responding. close the firefox and restart the system". I have gone through the online available documents that suggests that use the -no-remote option with profile so the default profiles works correctly. But -no-remote option doesn't work with the profile. So is there any way to launch the full version of firefox by launcher on second click on launcher?
Yes, I used separate profiles only. But the -no-remote option doesn't work as mentioned http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile.
Please find below the command what I am using
firefox -P "stripped" -no-remote
firefox
If I use the above command than the new firefox window get the configuration from the stripped even if I have used the -no-remote.
I use the -no-remote with firefox default than it works for the first time.
I have created the launcher for firefox default. So if I click second time on launcher than it doesn't work.
firefox -P "stripped"
firefox -no-remote
(But doc on link -> http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile) says do not use the -no-remote with default.
Do you have any idea why this is happening? -
Photosmart C4780 Mac OS 10.9 scan clear on preview, but saves black with white horizontal stripes
I'm having difficulty figuring out why my scanner all of the suddens saves all scanned documents (.pdf, .jpeg, .png) as a black document with white horizontal stripes. The preview scan from the utility looks fine.
I recently updated my Mac to OS 10.9.2
I have uninstalled all HP utilities and drivers and reinstalled them with all updates.
Printing works fine, as does copying.
I scan a lot of forms, so this is disconcerting.
Thanks for any help.
PS: I see that this is an issue that seems to have been solved for others, but my printer/scanner is not one of the ones listed. Is there another driver to try?
More info: Here is the error code log:
E [04/May/2014:21:42:15 -0500] Unknown directive BrowseAllow on line 23 of /private/etc/cups/cupsd.conf.Hi,
This is a known compatibility issue with the HP Scan application, which is not supported on 10.9.
You may scan using Apple's Image Capture or Preview as listed as a workaround in the following document, a Full Feature Software for your printer is not available for the operating system:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c04028214&lc=en&jumpid=reg_r1002_us...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
Scanned Images not working with iphoto6
All my hundreds and hundreds of scanned photos will not work in iPhoto6. My digital photos taken with a digital camera work just fine.
I use an Epson 2480 Photo scanner. All the photos I have scanned over the years and even my recent scanned photos will not work in iPhoto6. Some are psd, some are tiff and some are jpg. When imported and the Ken Burns effect is applied, they immediately have a red/orange overcast. They seem to be Ok as long as the ken burns effect is not applied.
I have updated all the way on iMovie updates.
So, if I scan a photo and import it into iMovie6 and try to apply a ken burns effect, it immediately applies a red/orange overcast. sort of like an orange translucent covering.
anybody help me with this, please?Yes, I use Photoshop CS. I normally scan my photos for printing. Save them in .psd. (which averages about 25 photos per customer) They are all saved in RGB mode. I copy them and convert those into CMYK mode for printing.
I then use the RGB photos to build an Imovie for my printing customers.
I take the same photos and use them to build a quick complementary family DVD.
BUT, now I have to re-open the files in photoshopCS and save them as a
jpg file, in order for them to work in iPhoto6. This procedure also works with preview.
However my digital camera photos work just fine. No need to resave them.
But...... I have hundreds of old photos I have scanned over the years that have to be reopened and RESAVED as a jpg in order for them to work in Iphoto6.
I mean HUNDREDS OF PHOTOS.
I guess, resaving them somehow strips them of their old scanning info tags????? but my goodness, that will be very time consuming. I dont know if I can wait for a bug fix from apple. Who knows if they will ever fix it?
Thanks again. -
Re: AQ/Referenceable Objects work with MDB on WebLogic
Great work! So you don't have to touch any of Oracle's classes, correct?
Do you have time to document the whole thing and post it here, including the source
code of all your custom classes?
Eric Ma
"Diptanshu Parui" <[email protected]> wrote:
>
>Forgot to add an important point.
>The extended classes have to in the oracle.jms package (not necessarily
>in the
>same jar) to extend the Oracle classes. And I have used aqapi13.jar.
>
>Dips
>
>"Diptanshu Parui" <[email protected]> wrote:
>>
>>Hi,
>>
>>After days of work on getting to integrate Oracle's AQ with WebLogic
>>I have managed
>>to get to a solution without making changes to the Oracle's AQ API.
>>
>>Eric Ma had managed to provide a solution about an year back changing
>>Oracle's
>>API and making the AQjmsConnection, AQjmsSession, AQjmsQueueConnectionFactory
>>& AQjmsDestination NOT implement Referenceable. This solution worked
>>with WebLogic
>>but meant that this cannot be deployed on Production environment.
>>
>>There was a myth that WebLogic's JNDI didn't provide support to Referenceable
>>objects like Oracle's AQjmsQueueConnectionFactory etc.
>>
>>This myth has been broken. Referenceable object CAN be bound and looked
>>up from
>>WebLogic's JNDI provided right Factory classes are written and the correct
>>constructor
>>for Reference is used in the getReference method of the Referenceable
>>implementation.
>>
>>In case of Oracle's objects, I wrote classes extending AQjmsQueueConnectionFactory
>>& AQjmsDestination. In the extended classes, I wrote toString method
>>and set private
>>String variable.
>>This string variable is just special character separated concat of all
>>parameters
>>used to call the constructor of the extended class.
>>Then, in the getReference method of the extended class, I used the following
>>constructor
>>of Reference.
>>
>>return new Reference( DipsAQQueueConnectionFactory.class.getName(),
>new
>>StringRefAddr("value",
>>value), DipsAQConnectionFactory.class.getName(), null);
>>
>>DipsAQQueueConnectionFactory is my class extending AQjmsQueueConnectionFactory
>>and DipsAQConnectionFactory is the factory class for DipsAQQueueConnectionFactory.
>>The object value passed in the StringRefAddr above is nothing but the
>>toString
>>of the extended class which was stored in the private String variable.
>>In the
>>factory class, the string is taken out the StringRefAddr and stripped
>>to get individual
>>parameters which were separated by special characters. Once, the individual
>>parameters
>>are got back, the Factory class instantiates the Referenceable object
>>and returns
>>it back.
>>
>>Another important point is in the extended class DipsAQQueueConnectionFactory
>>I wrote this method
>> public QueueConnection createQueueConnection() throws JMSException
>>
>> {
>> return createQueueConnection("user","user");
>> }
>>
>>And then using a startup class I bound the DipsAQQueueConnectionFactory
>>& DipsAQDestination
>>Referenceable objects to WLS. The MDB deployed on WLS was made lookup
>>for the
>>bound QF & Q and it started reading AQ messages.
>>
>>Few other points to note.
>>I have kept the user & pwd of WLS same as DB.
>>I have used OCI driver.
>>
>>Please feel free to raise further queries/suggestions.
>>
>>Dips
>
Eric,
This is the relevant part of the config.xml you were looking for.
<JMSDistributedQueue JNDIName="DQueue1" Name="DQueue1" Targets="ClusterTwo" Template="DQueue1">
<JMSDistributedQueueMember JMSQueue="Queue1" Name="DQM1"/>
<JMSDistributedQueueMember JMSQueue="Queue2" Name="DQM2"/>
</JMSDistributedQueue>
<JMSBridgeDestination
ConnectionFactoryJNDIName="AQJMSConnectionFactory" ConnectionURL="t3://ip:port"
DestinationJNDIName="AQJMSQueue" Name="AQJMSDest"/>
<JMSConnectionFactory JNDIName="ConnectionFactory" Name="ConnectionFactory"
ServerAffinityEnabled="false" Targets="IAServer,ClusterTwo" XAConnectionFactoryEnabled="true"/>
<JMSBridgeDestination ConnectionFactoryJNDIName="ConnectionFactory" ConnectionURL="t3://ip:port"
DestinationJNDIName="DQueue1" Name="Dest"/>
<MessagingBridge Name="MB1" QualityOfService="Duplicate-okay"
SourceDestination="AQJMSDest" TargetDestination="Dest"
Targets="IAServer,MS1 (migratable),MS2 (migratable),ClusterTwo"/>
No, I haven't used Oracle's OC4J 10g's AQJMS XA TX support classes.
cheers!
Dips
"Eric Ma" <[email protected]> wrote:
>
>Dips:
>
>Can you post your config.xml here to show how you set up WLS messaging
>bridges?
>
>Also, have you played with OC4J 10g's AQJMS XA TX support classes?
>
>Eric
>
>"Diptanshu Parui" <[email protected]> wrote:
>>
>>The sample code is now available at
>>http://dev2dev.bea.com/codelibrary/code/startupclass.jsp
>>
>>cheers,
>>Dips
>>
>>
>>"Diptanshu Parui" <[email protected]> wrote:
>>>
>>>Yes, no need to touch Oracle's code at all.
>>>
>>>I will post the whitepaper/code soon.
>>>
>>>
>>>"Eric Ma" <[email protected]> wrote:
>>>>
>>>>Great work! So you don't have to touch any of Oracle's classes, correct?
>>>>
>>>>Do you have time to document the whole thing and post it here, including
>>>>the source
>>>>code of all your custom classes?
>>>>
>>>>Eric Ma
>>>>
>>>>
>>>>"Diptanshu Parui" <[email protected]> wrote:
>>>>>
>>>>>Forgot to add an important point.
>>>>>The extended classes have to in the oracle.jms package (not necessarily
>>>>>in the
>>>>>same jar) to extend the Oracle classes. And I have used aqapi13.jar.
>>>>>
>>>>>Dips
>>>>>
>>>>>"Diptanshu Parui" <[email protected]> wrote:
>>>>>>
>>>>>>Hi,
>>>>>>
>>>>>>After days of work on getting to integrate Oracle's AQ with WebLogic
>>>>>>I have managed
>>>>>>to get to a solution without making changes to the Oracle's AQ API.
>>>>>>
>>>>>>Eric Ma had managed to provide a solution about an year back changing
>>>>>>Oracle's
>>>>>>API and making the AQjmsConnection, AQjmsSession, AQjmsQueueConnectionFactory
>>>>>>& AQjmsDestination NOT implement Referenceable. This solution worked
>>>>>>with WebLogic
>>>>>>but meant that this cannot be deployed on Production environment.
>>>>>>
>>>>>>There was a myth that WebLogic's JNDI didn't provide support to
>Referenceable
>>>>>>objects like Oracle's AQjmsQueueConnectionFactory etc.
>>>>>>
>>>>>>This myth has been broken. Referenceable object CAN be bound and
>>looked
>>>>>>up from
>>>>>>WebLogic's JNDI provided right Factory classes are written and the
>>>>correct
>>>>>>constructor
>>>>>>for Reference is used in the getReference method of the Referenceable
>>>>>>implementation.
>>>>>>
>>>>>>In case of Oracle's objects, I wrote classes extending AQjmsQueueConnectionFactory
>>>>>>& AQjmsDestination. In the extended classes, I wrote toString method
>>>>>>and set private
>>>>>>String variable.
>>>>>>This string variable is just special character separated concat
>of
>>>>all
>>>>>>parameters
>>>>>>used to call the constructor of the extended class.
>>>>>>Then, in the getReference method of the extended class, I used the
>>>>following
>>>>>>constructor
>>>>>>of Reference.
>>>>>>
>>>>>>return new Reference( DipsAQQueueConnectionFactory.class.getName(),
>>>>>new
>>>>>>StringRefAddr("value",
>>>>>>value), DipsAQConnectionFactory.class.getName(), null);
>>>>>>
>>>>>>DipsAQQueueConnectionFactory is my class extending AQjmsQueueConnectionFactory
>>>>>>and DipsAQConnectionFactory is the factory class for DipsAQQueueConnectionFactory.
>>>>>>The object value passed in the StringRefAddr above is nothing but
>>>the
>>>>>>toString
>>>>>>of the extended class which was stored in the private String variable.
>>>>>>In the
>>>>>>factory class, the string is taken out the StringRefAddr and stripped
>>>>>>to get individual
>>>>>>parameters which were separated by special characters. Once, the
>>individual
>>>>>>parameters
>>>>>>are got back, the Factory class instantiates the Referenceable object
>>>>>>and returns
>>>>>>it back.
>>>>>>
>>>>>>Another important point is in the extended class DipsAQQueueConnectionFactory
>>>>>>I wrote this method
>>>>>> public QueueConnection createQueueConnection() throws JMSException
>>>>>>
>>>>>> {
>>>>>> return createQueueConnection("user","user");
>>>>>> }
>>>>>>
>>>>>>And then using a startup class I bound the DipsAQQueueConnectionFactory
>>>>>>& DipsAQDestination
>>>>>>Referenceable objects to WLS. The MDB deployed on WLS was made lookup
>>>>>>for the
>>>>>>bound QF & Q and it started reading AQ messages.
>>>>>>
>>>>>>Few other points to note.
>>>>>>I have kept the user & pwd of WLS same as DB.
>>>>>>I have used OCI driver.
>>>>>>
>>>>>>Please feel free to raise further queries/suggestions.
>>>>>>
>>>>>>Dips
>>>>>
>>>>
>>>
>>
>
Maybe you are looking for
-
How do I change the default folder for saving contacts?
I have happily used Outlook for several years for POP accounts. My recent addition of an Exchange account has hijacked several default behaviors that I was used to. For one, contacts are now saved by default in the exchange related contact folder
-
No matter whether I click on the icon on the dock, or the icon in my applications folder, I've been getting the above message ("A copy of Firefox is already open. Only one copy of Firefox can be open at a time.") for more than six months, so I've had
-
How to set netctl to have eth0 up and wifi
I didn't find the clear answer, yet. My situation require to connect via wifi and a access point hooked on eth0 to serve more wifi users. The system works, but I must enable the eth0 manually. This is my setting ( a small ASCII drawing )
-
070302ex603 Formatting errors when posting via BD87 transaction
Hi experts, When posting idocs manually via transaction BD87 all users receive "Formatting error in the field BSEG-WRBTR..." or "Formating error in the field BKPF-BUDAT..." regardless of personal user settings. When the same idoc is posted via schedu
-
Help with PCI Bridge - MS-6378 Greetings! I'm having a problem in the Win98 Device Manger. In the device manager, there is a question mark next to other devices, and below it, there is an exclamation/question mark next to Other PCI Bridge Device. Wha