Working with acknowledgements
Pleas explain me how works transport and application acknowledgement in XI.
When I use teansport acknowledgement in BPM is the following sentece correct?
XI sends transport ack when data are stored into receiver system correctly and doesn't send in case of error.
It is true for all adapters.
What is the best way to catch an error? I can imagine only this way BPM + deadline exception handler. Another way is to use synchronous send step.
I have read several weblogs but I cannot find the best way
How to use application acknowlendgement in BPM? How it simplify my work.
Hi Denis,
have a look at this help page: http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/content.htm.
It shows a list with all adapters available in standard and what types of acks are supported.
That an ack is not sent in case of error is not true. XI will sent a negative ack. Have a look here on the types of acks: http://help.sap.com/saphelp_nw04/helpdata/en/f4/8620c6b58c422c960c53f3ed71b432/content.htm.
Basically we diferentiate between positive and negative ack and permanent and transient ack.
best regards
Christine
Similar Messages
-
Do SD card readers not work with 10.3?
I have an old G4 Power mac, and my kids have iMac G5s. We all run 10.3.9, and have SD card readers, and none of them work at all. Does Apple acknowledge that SD cards do not work with Macs, and/or was this fixed in 10.4? We are looking to replace our computers, and this is a deal breaker.
Okay, I did a little more research, and here's what I have found.
(Yes, I'm talking about a USB card reader.)
On my ancient G4 Mac, the 2GB card never mounts. I can see it with Disk Utility, but Disk Utility usually offers to format it. When I do this, it attempts to format it as a 1GB card, and fails.
However, I found an old 16MB card, and it mounts every time.
My kids both have a reader and a 2GB card for their iMacs. They usually mount okay, but not always. Sometimes it takes a restart.
The 2GB cards are all a funky off-brand, "Adata." The 16MB card is a Canon.
Now I am wondering if it's the cheap cards, or the capacity of the cards. I remember reading at one time that some Macs don't want to see removable drives over 1GB. This may be the problem with my computer. I just ordered a 1GB PQI card, we'll see how that does when it arrives.
My mac has both USB 1.1 and 2.0 slots. Same results on either bus. -
CISCO Box not working with Infrared Remove Control Repeater
There was an Infrared Remote Control Repeater set-up in my newly purchased house. It works for my LG DVD player, but does not work with my CISCO CHS435HDB box. Are there any work around for this? Should I change to a different box?
If you are using a repeater, make sure the piece that is relaying the IR signal is pointing directly the font of the Cisco box and nothing is plugged into the IR input port in the back of the box.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan -
ActionListener not working with JFrame
Hi,
I've just rehashed an old bit of code to work with a new application but for some reason the JButton ActionListeners aren't working. However if I extend JDialog they work ok. The current code for JDialog is:-
* File: GUI.java
* @author ODL 3xx Distributed Systems - Team x
* @description This class provides a means for the user to
* interact with file server.
import java.awt.*;
import javax.swing.*;
import java.awt.event.*;
import java.io.*;
import java.net.*;
public class GUI extends JDialog implements ActionListener, ApplicationConstants {
private JLabel label1, label2, label3, label4, label5;
private JTextField field1, field2, field3, field4, field5;
private JButton button1, button2, button3, button4, button5;
private Container container;
private Message sendFile;
private String id;
private String defaultText = "Enter file name here";
private ClientForGUI client;
private long timeStart, timeEnd;
public GUI(JFrame frame) {
super(frame, "File Server Actions", true);
client = new ClientForGUI(this);
try{
InetAddress addr = InetAddress.getLocalHost();
id = addr.getHostName() + Long.toString((new java.util.Date()).getTime());
if(client.connectToServer())
initGUI();
else{
JOptionPane.showMessageDialog(this, "Unable to connect to server", "Error", JOptionPane.WARNING_MESSAGE);
System.exit(0);
catch(UnknownHostException uhe){
System.out.println("Unknown Host Exception");
initGUI();
* Create the GUI
private void initGUI() {
container = this.getContentPane();
container.setLayout(null);
label1 = new JLabel("Upload File");
label2 = new JLabel("Rename File");
label3 = new JLabel("Delete File");
label4 = new JLabel("Create File");
label5 = new JLabel("Download File");
field1 = new JTextField();
field2 = new JTextField();
field3 = new JTextField();
field4 = new JTextField();
field5 = new JTextField();
button1 = new JButton("Upload");
button2 = new JButton("Rename");
button3 = new JButton("Delete");
button4 = new JButton("Create");
button5 = new JButton("Download");
label1.setBounds(10,10,80,20);
label2.setBounds(10,40,80,20);
label3.setBounds(10,70,80,20);
label4.setBounds(10,100,80,20);
label5.setBounds(10,130,80,20);
field1.setBounds(100,40,200,20);
field1.setText("Old name");
field2.setBounds(310,40,200,20);
field2.setText("New name");
field3.setBounds(100,70,410,20);
field3.setText(defaultText);
field4.setBounds(100,100,410,20);
field4.setText(defaultText);
field5.setBounds(100,130,410,20);
field5.setText(defaultText);
button1.setBounds(100,10,100,20);
button1.addActionListener(this);
button2.setBounds(520,40,100,20);
button2.addActionListener(this);
button3.setBounds(520,70,100,20);
button3.addActionListener(this);
button4.setBounds(520,100,100,20);
button4.addActionListener(this);
button5.setBounds(520,130,100,20);
button5.addActionListener(this);
container.add(label1);
container.add(button1);
container.add(label2);
container.add(field1);
container.add(field2);
container.add(button2);
container.add(label3);
container.add(field3);
container.add(button3);
container.add(label4);
container.add(field4);
container.add(button4);
container.add(label5);
container.add(field5);
container.add(button5);
setSize(640,200);
setResizable(false);
//Centre on the screen
Dimension d = Toolkit.getDefaultToolkit().getScreenSize();
int x = (int) ((d.getWidth() - getWidth()) / 2);
int y = (int) ((d.getHeight() - getHeight()) / 2);
setLocation(x,y);
setVisible(true);
private void sendMessageToServer(Message message){
message.setId(id);
timeStart = new java.util.Date().getTime();
try{
client.sendMessageToServer(message);
catch(IOException ioe){
System.out.println("Unable to send message to server");
* Perform some action based on user interaction
* @param ae - ActionEvent
public void actionPerformed(ActionEvent e){
Object o = e.getSource();
String name;
if(o == button1){
try{
JFileChooser fc = new JFileChooser();
fc.setVisible(true);
//return value is what the user presses in the open File dialog
int returnVal = fc.showOpenDialog(null);
//if they choose OK
if (returnVal == JFileChooser.APPROVE_OPTION) {
//file now references the selected
File file = fc.getSelectedFile();
//create a FileInputStream from file location
FileInputStream fis = new FileInputStream(file);
// Create the byte array to hold the data, the same size as the file
byte [] fileBytes = new byte[(int)file.length()];
// Read in the bytes from the file into the byte array
int offset = 0;
int numRead = 0;
while (offset < fileBytes.length &&
(numRead=fis.read(fileBytes, offset, fileBytes.length-offset)) >=
0) {
offset += numRead;
// Ensure all the bytes have been read in
if (offset < fileBytes.length) {
throw new IOException("Could not completely read file "+file.getName());
fis.close();
sendFile = new Message(SEND_FILE, fileBytes);
sendFile.setId(id);
sendFile.setFileName(file.getName());
byte [] myarray = ConvertData.messageToBytes(sendFile);
Message sendWarning = new Message(SEND_FILE_WARNING);
sendWarning.setFileName(file.getName());
sendWarning.setFileSize(myarray.length);
try{
sendMessageToServer(sendWarning);
catch(Exception excep){
System.out.println(excep);
catch(FileNotFoundException fnfe){
System.out.println("File Not Found Exception");
catch(java.io.IOException ioe){
System.out.println("IO Exception");
else if(o == button2){
name = field1.getText();
String name2 = field2.getText();
Message renameMessage = new Message(RENAME_FILE);
renameMessage.setFileName(name);
renameMessage.setFileRename(name2);
sendMessageToServer(renameMessage);
field1.setText("Old name");
field2.setText("New name");
else if(o == button3){
name = field3.getText();
Message deleteMessage = new Message(DELETE_FILE);
deleteMessage.setFileName(name);
sendMessageToServer(deleteMessage);
field3.setText(defaultText);
else if(o == button4){
name = field4.getText();
Message createMessage = new Message(CREATE_FILE);
createMessage.setFileName(name);
sendMessageToServer(createMessage);
field4.setText(defaultText);
else if(o == button5){
name = field5.getText();
Message downloadMessage = new Message(REQUEST_FILE);
downloadMessage.setFileName(name);
sendMessageToServer(downloadMessage);
field5.setText(defaultText);
public void processServerMessage(Message message){
switch(message.getMessageHeader()){
case SEND_FILE_WARNING:
//change the download size to file size plus max message size
client.setDownload((int)message.getFileSize(),true);
//turn message back around with acknowledgement header
message.setMessageHeader(SEND_FILE_ACK);
//send the message
try{
sendMessageToServer(message);
catch(Exception e){
System.out.println(e);
break;
//server has acknowledged that the client wishes to send a message
//so send the message
case SEND_FILE_ACK:
//send the message
try{
sendMessageToServer(sendFile);
catch(Exception e){
System.out.println(e);
break;
//server is sending the file to the client.
case SEND_FILE:
//reset the download size to default
client.setDownload(DEFAULT_MESSAGE_SIZE,false);
//get the file name
File f = new File(message.getFileName());
//create the file chooser
JFileChooser fc = new JFileChooser();
//set selected file as thoe one downloaded
fc.setSelectedFile(f);
//get the button hit by the user
int returnVal = fc.showSaveDialog(null);
//if button is OK
if (returnVal == JFileChooser.APPROVE_OPTION){
File temp = fc.getCurrentDirectory();
String [] files = temp.list();
java.util.List alist = java.util.Arrays.asList(files);
f = fc.getSelectedFile();
if(alist.contains(message.getFileName())){
if(JOptionPane.showConfirmDialog(null,
message.getFileName() + " already exists. Are you sure you want to overwrite this file?",
"Instant Messenger: Quit Program",
JOptionPane.YES_NO_OPTION,
JOptionPane.QUESTION_MESSAGE,
null) == JOptionPane.YES_OPTION) {
//f = fc.getSelectedFile();
System.out.println(f.toString());
//this is where the file is copied
try{
FileOutputStream fs = new FileOutputStream(f);
fs.write(message.getFile());
fs.close();
catch(IOException e){
System.out.println(e);
else fc.hide();
else{
System.out.println("Here " + f.toString());
try{
FileOutputStream fs = new FileOutputStream(f);
fs.write(message.getFile());
fs.close();
catch(IOException e){
System.out.println(e);
else fc.hide();
break;
case INFORMATION:
timeEnd = new java.util.Date().getTime();
Long rtrip = timeEnd - timeStart;
String str = Long.toString(rtrip);
double d = Double.valueOf(str).doubleValue();
String fullMessage = message.getMessage();
fullMessage += " The total time taken for the last request was " +
rtrip + " milliseconds" + " or roughly " + d/1000 + " seconds";
JOptionPane.showMessageDialog(null,fullMessage,"Information",JOptionPane.INFORMATION_MESSAGE);
break;
class TestGUI{
public static void main(String [] args){
JFrame frame = new JFrame();
GUI myGUI = new GUI(frame);
} If I change the GUI constructor to empty and extend JFrame instead of JDialog and change the call to super the ActionListener stops working. I've never known this problem before (i.e. I always use e.getSource()). I've even cast the object to a JButton to ensure that the right button is pressed and it is all ok.
Is there something fundamentally wrong when I make those simple changes to JFrame?
Regards,
ChrisI think rather the approach is your action handling in terms of the buttons. The giant actionPerformed method is difficult to read and maintain.
I would recommend the following things:
1. Split your ActionListener into multiple smaller listeners. There's not really even a reason for the GUI class to be an action listener. Instead of having GUI implement ActionListener and trying to keep all of the functionality in one place, use anonymous classes:
button3.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent e)
name = field3.getText();
Message deleteMessage = new Message(DELETE_FILE);
deleteMessage.setFileName(name);
sendMessageToServer(deleteMessage);
field3.setText(defaultText);
button4.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent e)
name = field4.getText();
Message createMessage = new Message(CREATE_FILE);
createMessage.setFileName(name);
sendMessageToServer(createMessage);
field4.setText(defaultText);
2. Only use the == operator on primitives. There are very few cases in which you can properly use the == operator on objects and, in every one of those cases I have experienced, the equals(Object) method produces the same result.
3. Name your variables more descriptively. There is really very little reason for your buttons to be named button1, button2, and so on. Give them names that mean something. For example, button1 should be named something like uploadFileButton or buttonUpload. That will give us significant information about what it is expected to do, whereas button1 does not. You may be able to remember what button1 does, but you wrote the code. I keep having to refer back to the instantiation of the button to get a hint as to what it does and, in a few months' time, so will you. :) The same goes for your labels and fields, as well.
I'm not sure why you aren't getting the behavior you want. However, have you checked to determine that the event source of the button click is actually the button when the whole thing is inside of a JFrame? I would expect it to be, but you never know. This is why I recommend using different ActionListeners for each button. That way, you can be sure of what caused the event.
Just my 2c. Good luck to you. :) -
I upgraded for Firefox 4 and now my HP SimplePass Identity Protection (biometric scanner) on my laptop will not work. WHY? It still works with IE but I don't use IE. It worked with the previous Firefox version but now when I use the internet, it doesn't even acknowledge I have the scanner. When I run my finger over it, it opens the settings panel but does not allow use of the already saved information or allow new information to be entered. I need this corrected. Any suggestions?
I asked this same question, and just received a response:
"Thank you for contacting DigitalPersona. There will be no update releases
for DigitalPersona Personal in the future. There will be no updates for
Firefox 4 nor Internet Explorer 9. IF they work they work, if they do
not work with DPPersonal, then you will have to decide to either keep
DPPersonal and forgo Firefox 4 or IE 9, or vice versa. DigitalPersona
is leaving the consumer market and is focusing on business applications.
In fact, DigitalPersona Personal will not longer be supported after
Mid-April of this year.
We apologize for any inconvenience this might cause. Sincerely, Tech Team "
In other words, there will be NO update. -
Sims 2 not working with QT 7.6. Will there be a fix?
The Sims 2 is not working with QT 7.6. The Sims 2 (Aspyr) web site acknowledges this problem and state they are working with Apple to fix this. This game is not cheap so rather disappointed at the moment. Anybody know if this fix will really happen? I don't really want to downgrade my QT Pro even if this would help?
Thanks.Whoops, I see this is quite well covered under "Quicktime 7.6 causes Sims 2 crash Pages ".
-
BPM: Send step with acknowledgment - Application
Hi folks,
Ive a simple BPM with receiver(sender file)->mapping->send(IDoc receiver). The Send step is configured with the option Acknowledge type -> Application. The scenario runs well, the IDoc is successfully processed, but my BPM remains waiting with the clock icon!!! Going to sxi_monitor, in the PE details is a step waiting for an event from R/3 with the message Waiting for an event SEND_OK_APPLICATION type CL_SWF_XI_MESSAGE. It seams waiting for an event that R/3 didnt send Did I miss some steps at R/3?
The idea is to receive an ack after my IDoc is successfully processed at R/3, in order to finish the BPM.
Regarding Acknowledgment type -> Application, the sap help says:
Wait for Acknowledgement
Specify whether the send step is to wait for an acknowledgement. To receive an acknowledgement in the send step, the receiver (adapter, business system, and so on) must send the corresponding acknowledgment.
Application - Specifies that the message was processed successfully by the receiver application (for example, posted).
I guess it should works, but maybe I'm missing something. Anyone knows how to work with this kind of ack at ccBPM?
Thanks in advance,
Ricardo.
Edited by: Ricardo Quintino on Jan 21, 2008 4:33 PMRicardo,
You would not believe me but I had the same requirement a year back.
Infact I ended up posting a thread on this on the XI forum,
Idoc Acknowledgements and Idoc Packaging
Answering your question in 2 phases,
1. R3 can send the AleAduit back to XI immediately. In the inbound processing code, all the R3 team would need to do is add the code to trigger the RBDSTATE report to trigger AleAudit to XI.
2. The problem with Correlation - Well, in your case as you are using Idoc Packaging , the solution 1 in my earlier thread would not do the trick. If you look in IDX5 in XI you will see that the Idoc Packaging trigger multiple Idoc's from XI itself but again the problem is the correlation and for this there is no straight forward solution than having some custom field in the Idoc and in the corresponding response.
But yeah overall your analysis was perfect. Idoc's are used for Asynch Communications and hence trying to achieve what we are acheiving is not always and necessarily the best solution. Proxies help in these cases, and if proxies are not possible then I guess RFC is the way to go.
Regards
Bhavesh -
BPM Send Step with acknowledgment: ID: sender agreement?
Hello everybody,
I have a send step in BPM and I expect a acknowledgement from the receiver.
Do I have to configure a sender agreement?
Thanks a lot
Regards Mariomario,
I have tried to use a Sen Synchronous Step to a JDBC adapter from a BPM and it works fine.
<i>After changing the send step in BPM from async to sync with acknowledgement, I get not response message</i>.
When you select MODE as SEND SYNCHRONOUS in your Send Step, there is no option to Select ACKNOWLEDGEMENT.
When you select the MODE as SEND ASYNCHRNOUS , you can have acknowledgements.
But, as you are using a RECEIVER JDBC adapter , you need to have a SEND SYNCHRNOUS step that will get the response back from the JDBC adapter. This response will double up as Acknowledgemet.
You can surround this Send Synchrnous Step with an Exceptuion Handler to handle any exception that might occur.
Regards,
Bhavesh -
Can LabView FPGA module work with non-NI FPGAs?
Simple Question: Can the LabView FPGA Module work with other FPGAs? Im assuming yes, but id like ot make sure first. Normaly I go with NI for most of my stuff, but they just are lacking in the FPGA hardware for what I need, but Im accustumed to LabView so I would like to stick with that to program it.
Thanks!
-MarkUsing LabVIEW and LabVIEW RT you can access the registers on any PCI/PXI card using the NI-VISA driver. NI-VISA also allows you to handle interrupts and DMA data. For interrupts you will not actually write an interrupt service routine (ISR) in LabVIEW. Instead the VISA driver will acknowledge the interrupt to the card and then pass a VISA event to the LabVIEW application letting the application know that it needs to process the interrupt. Detailed information about this type of programming is available in the following documents.
Using the VISA Driver Development Wizard and NI-VISA to Register-Level Program a PXI/PCI Device unde...
Configuring LabVIEW Real-Time and NI-VISA to Recognize a Third Party Device
Configuring LabVIEW Real...
Developing a LabVIEW Real-Time Driver for a PXI or Compact PCI Device
Porting a Windows PCI Device Driver to LabVIEW Real-Time
Considerations in Implementing LabVIEW Real-Time Drivers
Christian L
Christian Loew, CLA
Principal Systems Engineer, National Instruments
Please tip your answer providers with kudos.
Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system,
or for use in hazardous environments. You assume all risks for use of the Code and use of the Code is subject
to the Sample Code License Terms which can be found at: http://ni.com/samplecodelicense -
So I cannot scan my pictures, help. Windows 8.1 with HP Officejet 6500A Plus printer. Scanner works with other programs in my PC. Problem is PS12
I bought the Officejet 6500A Plus about one month and have experienced the very same problem. I tried to remedy this problem following suggestions in a number of different posts (static IP, router, firewalls etc), all to no avail. Last week I called support. The support I received by the tech over several hours and different days for a week was very good. However none of his suggestions corrected the connection issue. After today's recommended fix failed, he advised HP is aware of this issue with the 6500 and other affected printers. He claimed HP was working on a firmware upgrade. He did not know when the update would be provided. The tech also claimed HP acknowledged this problem in a written announcement. He agreed to email the announcement to me. I haven't received it. This has been the only problem I've had with the 6500
-
Overdrive Media console not working with iTunes when transferring audio books. Any suggestions?
Overdrive Media console not working with iTunes when transferring audiobooks. Some parts don't transfer.
Robin, I have the 4S too. Here's wha I've been doing. Well, I am downloading wma books, but it is super time consuming and annoying. First, shut off genius in your preferences in iTunes. Also change to spoken podcast for speed. Then, you start to transfer from Overdrive. It will create a playlist with your book title. Open up books though because you need to keep an eye on it. It may download like three parts and then you may have a grey one. When you get the grey, cancel the transfer, delete the greyed part, exit iTunes, re-enter iTunes, and then try to download the remaining book parts. I usually have to re-enter iTunes three or four different times during a book. When your book is downloaded, all black and none grey, open up the playlist folder and double check that all parts made it in there. If not, carry them from the books folder to the playlist and then move it into numerical order.
Re non bookmarking problem. I now have a new habit of checking what part I am on before i shut off my phone or switch to another book. It does save where you were, it just doesn't show you. For instance, if I start part three and then play music, and then go back to the book playlist, it will appear as if we are back to the beginning, but if I go to part three, it will start up from where I was. So, just start checking and then it is easy. I am flabbergasted that no other proper solution has been offered by Overdrive. This has been a problem since October. I also wish they would acknowledge the problem on their website as well as post what version number of update they have. I have 3.2.1.0 and think that's current. Does anyone have newer than this. Good luck, and happy commuting!
An easy, quick workaround is to plug external speakers into your laptop and take it with you in the car. A bit unwieldy, but I can't commute without books. -
Getting SMS relay to work with 2 macs
Hey guys,
So I have an iMac (late 2013 running OS 10.10.1) and a Macbook Air. (mid 2013 running OS 10.10.1) I've just noticed that SMS relay (from iPhone 6 running 8.1.1) only wants to work with one of the computers at a time, and on top of that, the devices listed under Text Message Forwarding in settings will have the wrong name.
To try and explain, if I have my iMac set up for SMS relay then in my device options for forwarding I'll have
Quinn's iMac
Quinn's iPad
Nick's Mac
All my devices should be Quinn’s X. However Nick is my first name.
Whereas if I do some jiggery-pokery (signing in and out of iCloud, turn iMessages on and off etc) and set up the MBA first I get this
Quinn's Macbook Air
Quinn's iPad
Nick's Mac
So the correct name for MBA is recognise now, but not the iMac.
It refuses to acknowledge both computers at the same time. The wrong name is always the same and it just switches about depending which computer I set up forwarding on first. And if I try and activate it using the wrong name, nothing happens.
A couple of points which may help to explain this.
The wrong name is my first name and so it's what the device name was originally called when set up, but I change that straight away to just Quinn’s X.
I set up my iMac from a Time Machine back up of my MBA
I think possibly somewhere between the 2 is where it's getting confused. That a) the device names aren't the pre-assigned ones and b) they are set up from the same settings initially.
So my question is this. Has anyone had this problem, and how did they resolve it?
I fear I may have to wipe one of the computers and start over, probably MBA as it’s my secondary computer. Try and rid my settings of what ever it being used to identify both computers. Pain in the arse to do that and would rather not have to so if anyone else has any suggestions let me know
As I said earlier, I've done all the off/on sign out/sign in business with all the devices multiple times and that's doing nothing. Also, I have just noticed, last thing I did was to configure my iMac to be the one to receive SMS relay. Now I’m out of the house with my MBA, my iPhone is showing that as being the computer that is set up and a quick test confirms this.
Man I’m so confused.
CheersI have this exact problem now. I can only "pair" my imessage to 1st macbook and 1 iPad. iMessage won't recognize nor sync messages on the second macbook. When I open the imessages screen on the 2nd MBP, the text bubbles are all green indicating I am sending via SMS and not even sending via iMessage (which has blue text bubbles).
This is really a problem because I need 2 mac's, one for home media use and 1 on the road for work use and I love using iMessage.
Help... -
Tascam US-600 isn't working, works with GarageBand.
Anybody else use the Tascam US-600 input and have issues in MainStage? I use it with GarageBand and have zero problems, but I get nothing in MainStage. In MainStage's preferences it acknowledges that it's there and I can select it as an input, but I get no sound at all. Any help or suggestions would be greatly appreciated. Thanks!
Have the same problem, and Mainstage works with MIDI instruments directly connected via USB.
-
01v96i Yamaha...will it work with logic pro X
I bought the new Yamaha 01v96i Mixer but I can't make it works with Logic pro, in the list of available DAW I only find the 01v96 which is not the same and in-fact it does not work with the 01v96i.
Does anyone have an idea on how to set Logic for it or at least does anyone know if the new Logic Pro X has the new 01v96i in the list?Lyford,
Again, in regards to hardware... it is not about LPX compatibility.. It is about compatibility with the OS X version and it's CoreAudio... Once you 'get' that point then everything else makes sense...
Tascam are notorious about leaving owners of "End of Line" products 'high and dry' when OS X is updated... and as you have found... the 1884 is not compatible with Mountain Lion 10.8.4 and likely will never be so... because Tascam will not be releasing Mountain Lion drivers for it.. so, it is not something you can use with LPX, which requires Mountain Lion 10.8.4 as a minimum requirement.
As an aside, Apple have acknowledged they make an error in simply using the LP9 Hardware compatibility chart for LPX (as LP9 could be used with earlier OS X versions for which there were drivers for the 1884 for example) and have said they will be issuing an updated version "in the near future"...... -
Will the Tascam FW-1884 work with Logic Pro X?
Hello,
I notice that the new Logic is 64 bit only and yet the Tascam FW-1884 is specifically listed as a supported control surface.
Tascam has not released 64 bit drivers for this device! Can anyone shed any light on this? Will it work only as a control surface and not an audio interface? Is the documentation in error? Anyone have this working with Logic Pro X?
Thanks,
Lyford RomeLyford,
Again, in regards to hardware... it is not about LPX compatibility.. It is about compatibility with the OS X version and it's CoreAudio... Once you 'get' that point then everything else makes sense...
Tascam are notorious about leaving owners of "End of Line" products 'high and dry' when OS X is updated... and as you have found... the 1884 is not compatible with Mountain Lion 10.8.4 and likely will never be so... because Tascam will not be releasing Mountain Lion drivers for it.. so, it is not something you can use with LPX, which requires Mountain Lion 10.8.4 as a minimum requirement.
As an aside, Apple have acknowledged they make an error in simply using the LP9 Hardware compatibility chart for LPX (as LP9 could be used with earlier OS X versions for which there were drivers for the 1884 for example) and have said they will be issuing an updated version "in the near future"......
Maybe you are looking for
-
How to create saveable forms for Adobe Reader 6.0 using Acrobat Pro 9?
Hi I'm using LiveCycle Designer ES (Acrobat Pro 9). I only need to create a simple pdf form where the user enters data and saves the file with the data using Adobe Reader 6. What are the steps to convert a Reader Extended PDF forms version 1.6 (Reade
-
Need Help with switching from Desktop to Laptop for Iphone 4s.
I have an Iphone 4s and I was wondering if it is possible to go from a desktop to a laptop and be able to sync my phone and be able to save everything that I have on my iphone and be able to transfer it to my laptop, such as pics,texts,contacts, apps
-
SWP works half the time with Vista 64, plus two installs
Hey all, I understand now that SWP only works fully with vista 32 but I do have it working most of the time with vista 64.(only crashed once) My questions are 1) For some reason on my uninstall folder it shows SWP twice. 2) When I tried to uninstall
-
Exception Propagation - Best Practises
Hello, I was thinking what is the best practise for exception propogation. The way I know and have been doing is to specify an error page in my web.xml and in that I get a request paramater from the sesion ( which I populate in the catch blocks acros
-
Certification from SAP Bangalore
Hi Experts, Can anybody guide me,how to go for the certification in FICO module through SAP Bangalore by paying Rs.30000 each for FI and CO ? What is the eligibilty for applying it and how can I get the necessary study materials for it. Thanks and Re