Working with folders Folders

Can anyone help me????? I work with folders in logic 7.2.3 for example I have my drums in a folder, vocs in a folder, as well as guitars and other instruments. The problem occurs when I record say vocals, because after the recording stops logic jumps out of the folder meaning I always have to double click the folder to get back to the recording that was made. I think it's a setup problem because in older versions of I had no problems. Everything else works fine. Help!!!!!!

What's the best method for moving all my nonsystem related stuff over to this new driveIan has provided you with the best solution, SuperDuper.
But if you have a 250 GB external, you really ought to clone your entire system,(only about 3 GB) so you have a backup.
I keep mine with a complete clone of my internal, that way it is easy to boot from the external and run utilities like Disk Utility, TechToolPro, DiskWarrior, etc. on the internal and vice versa.
If you run into a problem with say Preferences and don't know which one is the troublemaker, just trash the whole pref folder and use the good one from the clone. Font problem, same deal. And, if diaster ever strikes, you can just boot up from your external and keep right on working - fix the internal when you have time.
That's my 2 cents anyway
-mj
[email protected]

Similar Messages

Modify shell script to work with other folders

i am trying to modify a shell script that sorts files in a course folder into sub folders by month. I have a shell script that works, but when i try to modify it for another course folder it quits working. can someone let me know what i am doing wrong?
the working shell script:
do shell script "
for f in \"$HOME/Desktop/DWI Annual Report/\"*
do if [ ! -d \"$f\" ]; then
x=\"${f%%.*}\"
i=$((${#x}-3))
if [ -d \"$HOME/Desktop/DWI monthly/${f:$i:3}\" ]; then
mv \"$f\" \"$HOME/Desktop/DWI monthly/${f:$i:3}\"
fi
fi
done"
the nonworking modified script:
do shell script "
for f in \"$HOME/Desktop/DOEP Annual Report/\"*
do
    if [ ! -d \"$f\" ]; then
        x=\"${f%%.*}\"
        i=$((${#x}-3))
        if [ -d \"$HOME/Desktop/DOEP monthly/${f:$i:3}\" ]; then
            mv \"$f\" \"$HOME/Desktop/DOEP monthly/${f:$i:3}\"
        fi
    fi
done"

ok here is the applescript that works.
property total_student : 1
tell application "Finder"
set master_path to alias "Users:macbook:Desktop:DWI Annual Report:Annual Report.xlsx"
set filesWithDWI to get every file of folder ((path to desktop folder) & "DWI Annual Report" as string) whose name contains "DWI"
repeat with f in filesWithDWI
my transfer_data(f, master_path)
end repeat
end tell
on transfer_data(child_path, master_path)
tell application "Microsoft Excel"
set child_book to (open workbook workbook file name (child_path as string))
set child_doc to worksheet 1 of child_book
set master to worksheet "sheet 1" of (open workbook workbook file name (master_path as string))
set num to 15 --All lists start at index 12 or later, I'm putting 10 to be safe
set students to {}
tell child_doc --grab values from child document
repeat until (value of cell (("A" & num) as string)) is 1
set num to num + 1
end repeat
repeat until (value of cell (("B" & num) as string)) is ""
set end of students to {namevalue of cell (("B" & num) as string)), driver_idvalue of cell (("C" & num) as string)), DOBvalue of cell (("D" & num) as string)), Ref_Recvalue of cell (("I" & num) as string)), pre_testvalue of cell (("J" & num) as string)), post_testvalue of cell (("K" & num) as string)), cert_idvalue of cell (("L" & num) as string))}
set num to num + 1
end repeat
set startdate to range "C7"
set classlocation to range "C11"
set instructor to range "H7"
end tell
tell master
set num to 7
log (value of cell (("B" & num) as string))
repeat until (value of cell (("B" & num) as string)) is ""
set num to num + 1
end repeat
repeat with student in students
set value of cell (("A" & num) as string) to total_student
set value of cell (("B" & num) as string) to name of student
set value of cell (("C" & num) as string) to driver_id of student
set value of cell (("D" & num) as string) to DOB of student
set value of cell (("H" & num) as string) to pre_test of student
set value of cell (("I" & num) as string) to post_test of student
set value of cell (("J" & num) as string) to cert_id of student
set value of cell (("f" & num) as string) to startdate
set value of cell (("E" & num) as string) to classlocation
set value of cell (("G" & num) as string) to instructor
set value of cell (("K" & num) as string) to Ref_Rec of student
set num to num + 1
set total_student to total_student + 1
end repeat
end tell
save child_book
close child_book
save active workbook in master_path
close active workbook
end tell
end transfer_data
do shell script "
for f in \"$HOME/Desktop/DWI Annual Report/\"*
do
    if [ ! -d \"$f\" ]; then
        x=\"${f%%.*}\"
        i=$((${#x}-3))
        if [ -d \"$HOME/Desktop/DWI monthly/${f:$i:3}\" ]; then
            mv \"$f\" \"$HOME/Desktop/DWI monthly/${f:$i:3}\"
        fi
    fi
done"
It takes the class rosters and copies the information from the class roster to the annual report and then moves the file to the monthly folder and files it in the appropriate months folder based on the last three letters of the file name.

N95 music player and working with sub folders

Hi, I use file transfer to move my music from PC to N95 and use folders and sub folders within the music folder. I cannot see the folders when using the music player. I need advise how I can transfer my music easily so that I can play music files that are within a folder. regards.

Yes. The refresh seems to have no effect on the Podcasts. I even unsubscribed to all my podcasts--which is supposed to also delete the downloaded podcasts as well; did a refresh and the the podcasts are still listed on the mediaplayer.
Another weird thing is that if the podcast app downloads another podcast, it is added to the list!

Outlook 2013 search not working with public folders

Hi everybody,
We have a problem that our Outlook 2013 clients cant search public folders. Any search we try returns empty results. We are running exchange 2013. Outlook is running in cached mode.
Thank you!

Hi
To solve the issues in Outlook 2013, please follow these steps: -
In order to have the Instant Search feature for Public Folders behave the same as for your mailbox, the following conditions must be meet: -
Outlook must be configured to cache
Public Folder Favorites.
(and of course the caching and indexing must have been completed)
The
Public Folder must be marked as a Public Folder Favorite.
The search must be performed from within the
Favorites section of your Public Folders tree and not from its actual location within
All Public Folders.
Thanks and regards
Ashish@V

Why doesn't the desktop 'snap to grid' work with Snow Leopard?

I've recently upgraded my OS to Snow Leopard and I do a lot of work with photo folders which I keep organized on my desktop. Since upgrading the 'snap to grid' function in the view options of the desktop preferences has stopped working. For some reason the folders and files on the desktop keep snapping off the screen or on top of each other so that I cannot find them easily. I've had to turn off the 'snap to grid' and the desktop no longer looks organized and is not easy to navigate. Why is this happening? AND, how do I fix it? It seems to me the snap to grid shouldn't have gone out the window with an upgraded OS. I'm very organized and borderline OCD so this is FRUSTRATING me to no end!!!
Anyone have any ideas?

It's working for me in 10.6. Try moving this file in your Home Folder/Library to the trash -- don't empty it yet.
/Users/yourusername/Library/Preferences/com.apple.desktop.plist
When finished go back to the Desktop>View Options and select Snap to grid.
If that doesn't do it, open Terminal in utilities and copy/paste this command, then hit return. Don't attempt to type it in by hand. If you make a typo or get the spaces wrong, there could be a disaster. When finished go back to the Desktop>View Options and select Snap to grid.
rm ~/Desktop/.DS_Store

E-pub on playbooks , works with mylibra

1- Add mylibra app
2-conect playbook to computer
3- Go to my computer,
Find folder with epub books, click copy for the books you want to add to the playbook
Then
Click play book
Click “Misc.” folder
Click “android”
Click “mylibra”
Click “book or epub” worked with both folders, paste books to folder

This from Epson's support site isn't very promising:
<blockquote>Q: EPSON E-Web Print does not work since I upgraded to Windows 8.1. Why does this happen? 
A: '''EPSON E-Web Print is no longer supported by Epson.''' 
Published: October 16, 2013 
Source: [http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&infoType=FAQ&oid=216556&prodoid=63098723&foid=244208&cat=221235&subcat=214273 infoType=FAQ&oid=216556&prodoid=63098723&foid=244208&cat=221235&subcat=214273]</blockquote>
What did it do? Maybe there's a good substitute.

How to work with files in folders on Application/Presentation Server

Hi,
I am working on interface program in which files are populated in folders in application/presentation server in the format 'ABCsy-datumsy-uzeit.txt'(e.g.ABC20051022161450.txt,ABC20051022161455.txt ) in directory c:\temp.
I want to sort all these files and read in sorted manner.
can anybody help me out in this.
waiting for reply.
thanks & regards,
Nitin

Hi,
This logic will work for files on presentation server,
DATA: l_count TYPE i,
 l_filename TYPE string,
 t_files TYPE string OCCURS 0 WITH HEADER LINE,
 BEGIN OF t_files_sorted OCCURS 0,
 file_prefix(3),
 file_date LIKE sy-datum,
 file_time LIKE sy-uzeit,
 file_extension(4),
 END OF t_files_sorted,
 t_text TYPE TABLE OF w3html.
CALL METHOD cl_gui_frontend_services=>directory_list_files
EXPORTING
 directory = 'C:\Temp'
 FILTER = '*.txt'
 files_only = 'X'
 DIRECTORIES_ONLY =
CHANGING
 file_table = t_files[]
 count = l_count
EXCEPTIONS
 cntl_error = 1
 directory_list_files_failed = 2
 wrong_parameter = 3
 error_no_gui = 4
 OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT t_files.
t_files_sorted = t_files.
APPEND t_files_sorted.
ENDLOOP.
SORT t_files_sorted BY file_date file_time.
LOOP AT t_files_sorted.
CONCATENATE 'C:\Temp\' t_files_sorted INTO l_filename.
CALL METHOD cl_gui_frontend_services=>gui_upload
 EXPORTING
 filename = l_filename
 FILETYPE = 'ASC'
 HAS_FIELD_SEPARATOR = SPACE
 HEADER_LENGTH = 0
 IMPORTING
 FILELENGTH =
 HEADER =
 changing
 data_tab = t_text[]
 EXCEPTIONS
 FILE_OPEN_ERROR = 1
 FILE_READ_ERROR = 2
 NO_BATCH = 3
 GUI_REFUSE_FILETRANSFER = 4
 INVALID_TYPE = 5
 NO_AUTHORITY = 6
 UNKNOWN_ERROR = 7
 BAD_DATA_FORMAT = 8
 HEADER_NOT_ALLOWED = 9
 SEPARATOR_NOT_ALLOWED = 10
 HEADER_TOO_LONG = 11
 UNKNOWN_DP_ERROR = 12
 ACCESS_DENIED = 13
 DP_OUT_OF_MEMORY = 14
 DISK_FULL = 15
 DP_TIMEOUT = 16
 others = 17.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*****Your processing here..
ENDLOOP.
Also, use the FM that MAX has if you have to work with files on application server by replacing code in the above logic at appropriate places, like replace
cl_gui_frontend_services=>directory_list_files
with the corresponding fm
and replace cl_gui_frontend_services=>gui_upload
with OPEN DATASET...
 CLOSE DATASET...
logic.
Hope this helps..
Sri
Message was edited by: Srikanth Pinnamaneni

Cannot print "working with files and folders htm

When I try to print "Working with files-and-folders" from a Google search, it only prints part of it. I have changed my destination folder to no avail. Thank you or any help, Jack Menendez

What's the best method for moving all my nonsystem related stuff over to this new driveIan has provided you with the best solution, SuperDuper.
But if you have a 250 GB external, you really ought to clone your entire system,(only about 3 GB) so you have a backup.
I keep mine with a complete clone of my internal, that way it is easy to boot from the external and run utilities like Disk Utility, TechToolPro, DiskWarrior, etc. on the internal and vice versa.
If you run into a problem with say Preferences and don't know which one is the troublemaker, just trash the whole pref folder and use the good one from the clone. Font problem, same deal. And, if diaster ever strikes, you can just boot up from your external and keep right on working - fix the internal when you have time.
That's my 2 cents anyway
-mj
[email protected]

Mistakenly opened all the folders in my library of music and the Finder stopped working. Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing they reappear

mistakenly opened all the folders in my library of music and the Finder stopped working.
Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing will reappear

mistakenly opened all the folders in my library of music and the Finder stopped working.
Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing will reappear

Is Working with Folders in EASY DMS only

Hi DMS Gurus,
1) Is Working with Folder a Special feature of Easy DMS and not much use if we donu2019t go for specifically working with Easy DMS,
2) Can Easy DMS and Normal DMS work simutaniously, ie.. can both be implemented simultaneously and used parallely when and where each ones need is raised.
3) What r the limitations of going with EASY DMS as compared to normal DMS,
like Working with Folders can be configured with normal DMS implementations also?
Thanks in Advance,
Kumar

Hi Kumar,
Easy DMS is an external software which can be installed.
In Easy DMS working/managing with the folders is the great facility which is not overall possible in standard DMS.
Easy DMS fetches the backend configuration done in standard SAP. Depending upon the user's comfortability Easy DMS is used,if user is not comfortable with the standard sap screen then he can use Easy DMS where all functions like standard DMS can be used.
Maintaining folders is a option for which Easy DMS is used very regularly.
Configurations watever done once in standard DMS is applicable for both standard DMS and Easy DMS.
In Easy DMS particular authorizations can be provided for particular folders.
Thank You,
Manoj
Pl. reward if useful.

Is there a tutorial/primer for working with conditional text and page numbering in book folders?

I'm ramping up on FrameMaker 9 and have been experimenting with using folders in book files. I like being able to add Frame files to the folder to organize content. But I also need to use conditional tags. In one version of my book, the entire contents of some files in one folder are hidden using conditional text. I can't figure out how to set the numbering for each file so that the page numbers adjust appropriately in this scenario. Or is it even possible to do this?
Can anyone recommend an advanced tutorial for using folders in Frame 9?

Michelle,
It would be easier to maintain if you create a different book file that omits the entire "conditionalized" set of files.
See these Adobe TechComm blogs for some more background info on using hierarchical books and numbering behaviour:
http://blogs.adobe.com/techcomm/2009/05/xml_authoring_projects_using_hierarchical_books.ht ml
http://blogs.adobe.com/techcomm/2009/06/numbering_in_hierarchical_books.html

Using Bridge and LR with same folders/files

Having organized, edited and rated my photos using Bridge CS4 but recently started getting seriously into LR3 I still want to keep that file structure, either in a transitional period or indefinitely.
I normally use Bridge to import the photos, then spend some time creating sub-folders (one folder per event), organizing them. I'm hoping that I can add those (already organized) folders into LR, but can't figure out how. I see how I can import the photos, but I don't want that as I want to keep them all in the same location (they're all organized on the hard drive as I want them), just have LR "see" them so I can further edit and rate them. How do I do that?
I also want LR to understand and see the edits I've made to my RAW files as well as my ratings, keywords etc.
Are there other things I should keep in mind when having my photos work with both Bridge and LR?

It's possible to work the way you do, but with Lr it's a bit awkward, particularly if you start editing (developing) your images in Bridge.
You ask: " I'm hoping that I can add those (already organized) folders into Lr, but can't figure out how."
You have to import the images. Without importing nothing can happen in Lr.
So, open the Import Dialog. If it shows only the small window of the Import Dialog, click on the triangle in the bottom left corner, to expand the window.
On the left side you'll see the <Source> panel. navigate to the folder in question and click on it to select it. You will see all images in this folder in the main window of the Import Dialog.
Then in the top center of the Import Dialog select <Add>.
<Add> is for importing images that are already on the hard drive and you do not want to change their location.
<Move> is for importing images that are already on the hard drive and you do want to change their location.
<Copy> is for importing images from camera / memory card.
By selecting <Add> Lr will import the images in their present folder and will display the folder.
Your Bridge edits will also be imported because on import Lr reads the image file and the xmp-file where Bridge has stored the metadata of your edits.
But this is true only for import. Should you then decide for an image that has been imported in Lr to edit it in Bridge again, these edits would not automatically be visible in Lr. This is so because with imported images Lr stores all edits in its catalog, and does not display the metadata from the xmp-file where Bridge saves edits.
But you can make Lr read and display these additional Bridge-edits by doing a <read metadata from file>. But this is problematic because <reading metadata from file> will overwrite any Lr edits.
So you see that because of the fact that Lr works with its catalog while Bridge does not, editing images in Bridge and in Lr is a recipe for frustration. It can be done, but it's awkward and prone to mistakes.
Therefore I would suggest to bite the bullet and henceforth use Lr as your only editor. Import images from camera in Lr, do all your editing in Lr.
Since you are used to do edits in in Bridge Camera Raw, Lr will pose no big problems for you.
But if you don't want to let go of Bridge right away, I'd suggest you do at least one thing: After importing the images in Lr refrain from further editing these images in Bridge.

Importing Main Folders with Sub-folders

I am a new Mac user and I am trying to import my photos into iPhoto6.0. I have created main folders with sub-folders (eg. Main Folder = Holiday, Sub-folder = Australia Trip) and would like the sub-folders to appear when I open iPhoto. However, I cannot seem to get the main folder or sub-folder names to appear in iPhoto. The photos just get imported into the library and segregated by year.
I tried reading the forum, and seem to infer that iPhoto cannot handle sub-folder names. However, when I read iPhoto 6.0 Help page, it states:
"You can also drag individual photos or an entire folder from the Finder into iPhoto's photo viewing area. If you drag a folder, a film roll is created with the folder's name. If the folder you import contains subfolders, film rolls are created with each subfolder's name."
I tried the above, but I don't seem to manage to get the film rolls named as described.
Please help!!
MacBook Mac OS X (10.4.8)

Could it be confusion with what you are viewing in the iPhoto window?
iPhoto always shows you a "last roll", which is really more like a smart album than a Film Roll. It is simply a quick way to find the photos from your most recent import session. When I drag in 2 folders to import, it only shows the second folder when I select "last roll." Are you seeing photos from one of your folders, or both of them together?
Select "Library" from the top of your Source Pane to see your entire library. It doesn't mattter if you already have photos in your library or if you're beginning fresh. Under the "View" menu, select "Film Rolls" so that it is checked. Also under View, select "Sort Photos" > "by Film Roll". Now try to select the name/icon of 2 folders in Finder, then drag over the iPhoto window onto where the thumbnails display your library. (Or display nothing, if your library is empty.) Release when the curser is a green plus sign. When the import is finished you should see the 2 folder names (now as rolls) each with a set of thumbnails below it. Check the slider near the bottom right of the iPhoto window; moving it all the way to the left will give you the smallest thumbnails and allow you to see more photos at once.
Please try this again and let me know how it goes. If this does not solve it, then I can tell you how to check what's in your library. But the Film Roll view should work.

I want to delete folders in the email I want to start over with new folders

I want to delete the folders that appear on the left side column next to the email window..... I don't know how else to describe it. I saved folders that I now want to delete, or re label into new folders
Gene

you are correct, I am using an email program...Yahoo!
I had created folders that line up on the left side of the page, next to the email inbox that is open with all the emails showing....I wanted to delete the folders and start over with new folders, without emptying them, or renaming them......
I kept trying, and found out that selecting the folder, and actually hitting the delete button on my keyboard.....and it worked!!! what do you know!...I thought there must have been a super secret keyboard trick...and I feel ashamed I didn't think of that(''selecting and typing the delete key'') before posting the question...I want desperately to reorganize my email, with customer names, before starting over with new folders.
thanks for your quick response...anyway.

Issues with take folders \ comping

I was messin around with "Take Folders" and the new comping feature. . . My question is this, once you group a buncha pre-recorded clips into a take folder ("pack them") is there any way to move their location without unpacking and starting over?
Randomly they are being shifted out of sync (PROBLEM) and it's a huge pain in the *** because I have no idea how to fix it without unpacking and messing up all my work
Thanks
jeremy

remove current gmail account
then add new account
choose email, calendar, contacts
choose advanced setup
Choose Microsoft Exchange ActiveSync
- Description, put what you want to describe it
- Leave domain blank
- User name will be your user name on gmail
- Use your email address for email address
- Use m.google.com for server address
click on save and enjoy
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Working with folders Folders

Similar Messages

Maybe you are looking for