WORKING WITH TIMELINES

Hi
I have a game designed in flash using the Object Oriented Approach. This implies I have various classes with a main class.
I also have two versions of the game collaborative and non-collaborative which can be palyed using three different game controllers. so in total I have 6versions as shown below:
collaborative palyed with gamepad
collaborative played with wiimote
collaborative played withbalance board
non- collaborative palyed with gamepad
non-collaborative played with wiimote
non-collaborative played withbalance board
Now I want to have a screen with links to all these verions for example when I run the game I want to get an intro screen with the versions written on it and then with button clicks play the particular version I want.  Can I do this on the Timeline. if possible what is the procedure?

in your new main swf:
var loader:Loader=new Loader();
addChild(loader);
var a:Array=[collaborative_palyed_with_gamepad_btn,collaborative_played_with_wiimote_btn,coll aborative_played_withbalance_board_btn,non__collaborative_palyed_with_gamepad_btn,non_coll aborative_played_with_wiimote_btn,non_collaborative_played_withbalance_board_btn];  // <-create those movieclip btns
for(var i:int=0;i<a.length;i++){
MovieClip(a[i]).addEventListener(MouseEvent.CLICK,clickF);
MovieClip(a[i]).ivar=i;
MovieClip(a[i]).buttonMode=true;
function clickF(e:MouseEvent):void{
var ivar:int=MovieClip(e.currentTarget).ivar;
loader.load(new URLRequest(a[ivar].split("_btn").join(".swf"));  // assuming your swfs are named collaborative_palyed_with_gamepad.swf (sic) etc

Similar Messages

  • Looping animation not working with Timeline Action...

    I've used the Timline Actions Panel a few other times to loop animations by just selecting 'Complete' and then using sym.play(0); to return to the beginning - pretty hard to mess up I thought.  I have a new animation where this is just not working at all.  Could there be any other reason this is not working or perhaps something I'm just not looking at? 

    Hey,
    Sure, no problem.  Here's a link a a demo of it: http://www.damon9.com/dev/publish/web/EndofDays.html
    Not sure how much you can see from just that, but inside the Edge comp there's nothing crazy going on.  4 layers, 2 rotating 6 degrees a second, stops at 60 seconds (when it should start back from the beginning).  I've tried the usual Timeline Action sym.play(0); on complete and also just adding a trigger at 60 seconds of sym.play(0);
    Just can't imagine what else it could be.
    Thanks
    Damon

  • Pause/Play Wav Files Not working with timeline

    OK, I'm going crazy here. I have imported a WAV file into my
    Flash timeline. I have a button that pauses the timeline, and also
    stops all sound. But... when I click on the play button to continue
    the movie, the sound is no longer present. It's as if the timeline
    only recognizes the first frame of audio, even within the source
    file if I put the cursor anywhere besides the first frame of audio,
    it does not play.
    Any help desperately needed

    I almost have you. The code provided, I guess I would put
    that on the frame where I redrop my wave file (that I did all the
    link changes to as described).
    Also, in conjunction with the code provided, do I need to
    also put codes in for my buttons, or will that script you provided
    take place of such.
    Also, the code you provided, am I to put my own information
    in there, or is it set to go as is.
    I will only have a play button and a stop button. Just a
    simple a play and stop action for each. Also, I didn't give an
    instance name for each button, just default as is.
    Almost there! I'm excited, thanks for help and hopefully more
    help!

  • Final Cut Pro 7.03 crashes, impossible to work with the system

    Hi,
    I have a mac pro with the following configuration:
    *2,4 Ghz westmere octa (mac pro 5,1)
    *24Gb Ram in 6x4gb FCM 1066MHz modules
    *DeckLink HD Extreme 3D video card
    *ATI Radeo HD 5770
    *NVIDEO Quattro 4000
    *Tempo Sata e2p esata controller
    I work a lot in final cut pro, but it crashes like every 5 minutes or even faster, sometimes i runs for 10 minutes without a crash. That is terrible and that 10k workstation is not usable...
    I already formatted the harddisk, re set up osx and fcs, installed every update for every part of my workstation but cannot fix it.
    Especially viewing clips as thumbnail galleries (video previews) and working with timelines where you have those little video thumbnails on every cut in the beginning of the clip and scrubbing around there leads to crashes.
    I mostly work on xdcam422 material at 220mbit and 280mbit recorded with the nanoflash, but also in prores422hq.
    Anyone an idea on how to fix this?
    Thanks a lot!

    Hi,
    Here the Maintainance Pack Log:
    This crash log suggests that Final Cut Pro was overloaded at the time of the crash. This can occur if your project is overly complex, has multiple Motion project layers or is using MPEG-based media (HDV, H.264, MPEG-2, XDCAM, AVCHD), particularly if you are using filters with such media. Note that overloading is more likely to be the cause of the crash than the reason below.
    Corrupt / Unsupported Media
    This crash was caused by corrupt media or media that is unsupported by Final Cut Pro. A common cause of this crash is using media on your timeline that is unsuitable for editing such as AVI, WMV or MPEG-derived codecs (XDCAM, HDV, MPEG-2, H.264).
    Suggested Actions
    Use Corrupt Clip Finder to locate the problematic clip and then recapture or attempt to repair it.
    If your sequence codec is set to an MPEG-based codec such as MPEG-2, HDV, XDCAM or H.264, change it to ProRes.
    Alternatively, and for best results, convert any MPEG-based media to ProRes.
    If the issue is related to a codec, upgrade the codec if an upgrade is available or consider transcoding your footage to an editing-friendly codec such as ProRes.
    If you are using CMYK images, convert them to RGB.
    More Information
    To improve the stability of your system, create a less complex "lite" version of your project, export embedded Motion projects as QuickTime movies and if you are using MPEG-based media such as H.264, HDV and XDCAM, set your sequence codec to ProRes or convert the media to the ProRes codec.
    Relevant Line
    0 ...ickTimeComponents.component 0x97395a1c FindAligningPiece + 274

  • Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box.

    Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box. Thanks! Olga

    If the clips are not actually missing, you could try to refresh the timeline by using cmd-0 and then going to the timeline options tab. Then select name only where it says "thumbnail display". Press ok to accept the change, then repeat the process to add thumbnails back to your timeline.

  • Is it possible to configure Time Capsule to work with Time Machine (MBP) and Genie Timeline (PC)

    I have an Apple Time Capsule (2TB) and I need to configure it to work with my MBP and Time Machine and also back up my a PC with Genie Timeline Pro 2013 (or any other suggested PC back up software).
    Setting it up to work with Time Machine is simple enough but the PC access is proving to be difficult.
    http://www.genie9.com/support/KB/KnowledgeArticle.aspx?KBID=198
    I followed the above steps but still can't connect to the network drive.  I have reformatted the TC and will be walking through the steps again.  My concern is that the two different operating systems (Win8 and Mavericks) can't share the same destination drive.
    I have created two user accounts with drive sharing activated.  One in my name for my MBP and the other in the name of my partner for her Dell laptop.
    Should the Time Capsule be partitioned?  Can it even be partitioned?  When I use Drive Utility it can't see the TC.  The only way to connect to it seems to be via Airport Utility.
    On a seperate note the TC Router Mode is set to OFF (Bridge Mode).  I have connected it to the ADSL modem/router (WiFi Off) via the WAN port.  All seems to be well.  Am I loosing any useful functionality by doing this?
    The internet settings are set Connect Using DHCP.  I have no issues but I am not really sure what it means and if I should be using other settings.  The ADSL modem/router seems to have all the PPP0E settings.
    The WiFi on the TC has been set up with a 5Ghz and 2.4Ghz network as well as a Guest Network.  I then plan to introduce 2 Airport Express (MB321LL/A). One will be an access point for AirPlay and the other a wireless extender with AirPlay.
    There is also a Canon WiFi printer that accesses the 2.4Ghz network.  It has an Ethanet port so I am wondering if I should disable the wifi connection and cable it and if so to the TC or the DSL modem/router.

    Lion, 7.6.1 firmware and iCloud offers remote access.
    http://www.apple.com/au/support/icloud/back-to-my-mac/
    To do it without the iCloud service your issue is static public IP address.. if you have one this is simple to the point of trivial. If not it is very hard, as Apple did not put in a standard dynamic DNS service.. (ensuring you were roped into their cloud accounts). Static IP from your ISP is the best solution.. if it is possible go for it.
    Then the actual protocol for access is AFP, so the only device you can do this on is a Mac.
    Do you have the TC as the main router?
    If you want any other kind of access, or to avoid icloud use vpn.. which teamviewer is a kind of.. but buy a real vpn router, and bridge the TC.. you can then vpn into your network with full security and get windows access via smb..

  • Best way to work with interlaced and progressive clips in the same timeline

    I´m shooting with Sony MC-50E camera in 1920x1080, 50i. When importing with Log & Transfer I can work with ProRes 422 files in interlaced mode. I have to mix the footage with video screencapture which is progressive (ProRes 422). The final videos are for web only so it should end up as progressive H264 videos. I´m getting good result if exporting to H264, 1024x576 with deinterlacing enabled, but exporting to full HD gives typical interlaced lines in the picture. How can I avoid this and what is the best solution for working with both interlaced and progressive clips?

    Deinterlace in Compressor using Frame Controls, Best settings. You can reconnect the deinterlaced files to your project, if you've already edited, but you may need to copy and paste the clips in your sequence to a new 25p timeline, then Remove Attributes, Basic Motion.
    When you're ready to export your sequence, use Quicktime Movie, Current Settings, Self-contained. Take that file to Compressor to transcode back to h.264.
    The Apple T.V. preset is very good.

  • What is the best way to work with mixed media in 1080 timeline?

    Hi there,
    I have a project shot mostly in 1080 24p but a bit of 720 24p and 4x3 30p footage.
    What is the best way to work with this mixed media?
    Thanks!
    Steven

    Hi Shane,
    Ok just to recap (thanks for being patient by the way)...I have put some questions in here...feel free to write in caps to respond and we'll put this baby to rest!
    1) I will work in a 1080p FCP sequence, correct?
    2) HD 1080p footage captured as applepro res hq I will leave as is and work with?
    3) HD 720p footage which was captured as applepro res hq. Can I just drop in 1080 timeline and let FCP do its work? Or should i run through compressor, if so what setting shall I submit it too?
    4) I dont have a budget for an external hardware to convert SD to HD...should I capture my SD Beta through Final Cut and just leave and let FCP do its work? Or should I run through compressor? If so what setting shall I submit it too?
    5) For for my master sequence in FCP am I not using an I-Frame format apple pro res if I am using my apple pro res hq 1080 footage as my formatted sequence? I am not sure what you mean by GOP?
    6) I also found some 60p footage 1080p XDCAM compressor shot with the same XDCAM camera. I put in the 1080p 24p timeline but it was pretty choppy...any ideas of this conform?
    Thanks very much for all your help it has gone along way,
    Steven
    Saying what CODECS you are working with was my question. 1080, 720, 4:3...really says nothing. There are a dozen 1080 codecs, another dozen 720 codecs, and nearly 100 4:3 formats.
    Best to capture all the footage to one uniform codec.
    Second best is to work with one format and let FCP conform the rest to that...IF and only IF that format is an I-Frame format like ProRes. GOP formats as master sequence formats cause TONS of issues.
    What I'd do is work 1080 ProRes, just add the 720p footage (Use Compressor to convert it if you didn't have a lot, but if you had a lot, just add it), but I'd capture all the SD 4:3 footage via a Kona 3 or Matrox MXO2 as 1080 ProRes. Hardware conversion of SD to HD is much better than anything FCP can do. AE might do good as well. But then use Compressor to convert 29.97 footage captured (you can't convert 29.97 to 23.98 when you capture) to get to 23.98.

  • FCPX 10.0.7 collapses when working with 25p and 23,98p clips in the same timeline.

    FCPX 10.0.7 collapses when working with 25p and 23,98p clips in the same timeline.
    Did anybody reported this? never happened to me in previous versions.
    It seems to be solved when transcoding the 25p clips to 23,98p (both Canon EOS 5dMKII clips)
    But *** it must work!
    Thanx

    FCPX 10.0.7 collapses when working with 25p and 23,98p clips in the same timeline.
    Did anybody reported this? never happened to me in previous versions.
    It seems to be solved when transcoding the 25p clips to 23,98p (both Canon EOS 5dMKII clips)
    But *** it must work!
    Thanx

  • Premerie Pro CC - have sound on timeline, yet when I export file i am missing sound in one tiny clip. Can I be related to working with Merged clips?

    Hello Premerie Pro CC community,
    I need help, I am working with merged clips (the video footage shoot with a DSLR and different audio recorders). I have a timeline in premerie with sound all finished. Everything was fine until I when and fine tuned some of the audio, just added key frames to correct and now when I export my sequence I am missing sound in one little clip of the entire mov.
    Does it have to do with sound and editing with a merged clip?
    I have tried to export in several different settings and still the same result, and when I look at my timeline the sound is all there.
    I have until the end of Monday to figure what I have done incorrect
    thanks
    -DragonFly

    In case it is a phase problem, try adding fill left effect to the faulty clip.

  • An Idea: How to make the Magic Timeline work with Tracks

    i have thought about this for a title and i think i have found a solution. the magic timeline is pretty cool but with it we lost tracks. for broadcast (not only for that but mostly for it) you need tracks that are assignt in a special way and there is no way around it. so i came up with the following idea…
    to make the magic timeline work with tracks it will be a like an audio compound clip, that will give you full access to the magic time. but it can be outputted to proper tracks assignment.
    current audio compound clips don't show you the video if there is one. this one will. also audio can be tagged to a track so it will automatically drop into the right track. you can of course move the audio from one track to another. moving the clip to another track will auto change the tag to new track. if you copy an audio clip from one track to another, the original clip will keep its tag but the copied one gets the new tag.
    example…
    you do a voice over with all your edits and stuff. then you collapse it to a track (new name to get rid of any sort of confusion). you can tag/name the track to "voice over" or whatever you want and color label it.
    you need to edit, adjust it? no problem! double click it and it will open up and you'll see the magic timeline. edit till you done and click on arrow to return to track view.
    export your movie with proper tracks for broadcast right out of final cut pro x
    in the end your output timeline looks like a timeline from fcp7 before you output it on tape.
    could this work? i believe it could and it would help to make fcpx ready for broadcast.
    i hope this makes some sort of sense to you
    anyway, i hope apple will include this or something like this in an update for fcpx.

    You may be able to get by with just running MDT 2010 for now. *However* you *must* ensure that you are running WinPE 3.1 or greater, If you are unsure, open up a command prompt in WinPE (PRess F8), and run "ver" it should say build 7601 or greater, 7600
    and less is not compatible.
    When done, Run the Dell Advanced Format tool in the Full OS on a deployed machine to verify:  http://del.ly/afhdd  Although it is possible to install an OS on an Advanced Format Drive
    with WInPE 3.0 or earlier, and it may *appear* to work, performance may suffer. The Dell AF tool should tell you if the sectors are aligned properly.
    Additionally, it is also possible that the storage driver you have installed in your image is incompatible with AF drives. Check the Make/Model and check with the Hardware Mfg to see if they have driver that supports AF drives.
    Keith Garner - keithga.wordpress.com

  • Working with Uncompressed Beta in the Timeline

    I am trying to figure out how to work with uncompressed Beta footage in FCP 5. I have tried changing my timeline settings to the format that my footage was digitized (8 bit Uncompressed) but FCP still drops frames. The only other thing I have been able to do is render the footage in a standard timeline, but everytime I make a cut I have to render again. Is there a solution?

    An ethernet workflow (sharing media over a LAN) even with gigabit is really only semi-doable. I've done it on DV projects, as have others here, but the problem is consistency of delivery, even under DV conditions, I sometimes got dropped frames.
    If you're doing uncompressed 8 bit, you can do that off a single internal SATA drive, 10 bit would require a controller and softraiding (that's the route I went).
    But I'd definitely say that your problem with dropped frames is most likely the result of accessing high bandwidth requirement media over an ethernet connection.
    Finally - how are you displaying this timeline? Surely not firewire, so do you have a display/capture card like Kona/Decklink/Etc?
    Patrick

  • Working with photoshop with GFX in an HD timeline - motion

    hi curious if any one could help me with getting the right setting for working with psd files in motion. the project is hd 960 x 720 59.94 px 1.33.
    my photoshop settings are the same yet when I bring the file into motion the line art become soft when I scale the object.
    anyone got any tips?
    -jl

    Before you switch to Illustrator, let's see if Motion is reading the vector art. Go to your Media tab (CMD+5) and select the psd you imported. Under the Media tab in the inspector look to see what it says for fixed width and fixed height.
    With Illustrator files, I'm able to just adjust that to whatever I want it to be no matter what it began as. For instance, if I pull in a particular .ai file, it'll have something like 363x359 pixel size in the Media tab. If I scale the image past 100, then it looks soft and stair-steppy.
    However, in the Fixed Width box in the media tab, if I change the width to 2500, then all of a sudden that scaled up image looks clean and sharp.
    Try that with your psd and if it reacts the same, then I'd say you're fine staying in Photoshop.
    Andy

  • Why does my Web Handler work with Internet Explorer, but not with Firefox

    I am trying to develop a web page that uses the Simile Timeline (http://code.google.com/p/simile-widgets/wiki/Timeline) with data from SQL Server.
    In initial testing of my timeline I tested it with Example.xml, a static XML file in the correct format to be event data. I wrote the following in the appropriate place within mytimeline's Javascript: -
    var WebHandler = "Example.xml"
    tl.loadXML(WebHandler, function (xml, url) { eventSourceFamily.loadXML(xml, url) });
    This worked fine with both Firefox and Internet Explorer. I then changed the assignment to
    var WebHandler = "GDBTimeline.ashx?Type=Family&Userid=" + getControlValue("input", "hdnUser");
    so that invoked a web handler that could look up the SQL database and return the XML that I wanted, and wrote this web handler.
    This works perfectly with Internet Explorer, but with FireFox the timeline band is blank. Yet when I examine the http traffic with Fiddler2 (http://www.fiddler2.com/fiddler2/) I see that with either browser there is a response from URL
    /GDB_pages/GDBTimeline.ashx?Type=Family&Userid=robertb
    that returns the XML that it is supposed to.
    I have previously used web handlers with Firefox before, with no problems. The Fiddler results conclusively show that the web handler is invoked, and returns the appropriate XML, and this XML is identical to the XML from the static test with Example.xml.
    Where do I start looking for answers? I don't even know if this is a Simile problem, a Firefox problem, or an ASP.NET problem.
    Thank you, Robert.

    Problem solved. The issue: Content Type was not correct.
    Visual Studio creates the web handler with dummy code like this: -
    Public Sub ProcessRequest(ByVal context As HttpContext) Implements IHttpHandler.ProcessRequest
    context.Response.ContentType = "text/plain"
    context.Response.Write("Hello World")
    End Sub
    I wrote a database query that set a string variable to the XML I wanted: -
    Public Sub ProcessRequest(ByVal context As HttpContext) Implements IHttpHandler.ProcessRequest
    Dim Outstring as string
    ' my logic to fill Outstring with XML
    context.Response.ContentType = "text/plain"
    context.Response.Write(Outstring)
    End Sub
    This works with Internet Explorer. However it's not strictly correct: to make it work with other browsers as well,
    context.Response.ContentType = "text/plain"
    should be
    context.Response.ContentType = "text/xml"
    It now works with IE, FF, and Chrome, and presumably all others.

  • How to Work With Still Images in Premiere Elements 10

    I am struggling with the still images in my Titles for my video project, and would really appreciate some help. I have done a lot of googling on this and searched this forum, but can't seem to find the answer I need, maybe not searching the right questions or just "not getting it".  Not even PE Adobe tips or Adobe TV cover this, although it seems important to know. I am not clear how PE10 will handle the resolution of an imported still image or graphic art from Photoshop. Perhaps this topic will also help others as well.
    I am working on a video project for my job, editing an old training video. Created new Title graphics in Photoshop, inserted the Title images and integrated with video clips, then exported the video segments as MPEG files.  I burned the whole video to DVD.
    When the final DVD plays on a computer or TV screen, the photo images in the titles are fuzzy even though they were clear 300 dpi images. (I know dpi doesn't matter in video). The title text is also a bit fuzzy and the title text that has animation applied to it is even more fuzzy. Yet the old MPEG video clips look fine - it's just my title graphics and text that look bad (embarrasing).
    So I need to know how to improve the quality of the still images/graphics for a video??
    Project settings:
    - Hard Disk, Standard 48kHz
    - Editing Mode: DV NTSC
    - Frame: 720 x 480 (0.9091)
    - Frame rate: 29.97fps
    - with "Optimize Stills" box checked
    Using these settings because I am working with MPEG files from an old training video CD.
    File Export: MPEG, NTSC DVD Standard
    I export the video clips as MPEGS because they will be burned to a CD or DVD for distribution to our staff offices.
    Work Details:
    In Photoshop, I created still image graphics for each Title sized at 720 x480 with high resolution photos and company logo (300 dpi), and save them as a bitmap to import into PE10.  In the Timeline, I insert the still image in "Video 1" track, then in Video 2 track create a Title over it for text (some animated, some still). Sometimes I stack 2 or three titles with text in separate video tracks over one still title image. Yes, there is a red line across the top in the Timeline because I didn't render the still images.
    Questions:
    • What is the best resolution for images imported into PE10 from Photoshop?
    • Should I be creating title graphics/images at 720 x 480 or a larger ratio like 1920 x 1080 so it will display better when seen on a computer or TV?
    • Do I need to render each title image in the timeline so that it will eventually display better in the MPEG?
    • Is it better to create a title and then insert the still image into the title so they are integrated, rather than layered on separate video tracks?
    I would greatly appreciate any assistance.

    When the final DVD plays on a computer or TV screen, the photo images in the titles are fuzzy even though they were clear 300 dpi images. (I know dpi doesn't matter in video). The title text is also a bit fuzzy and the title text that has animation applied to it is even more fuzzy. Yet the old MPEG video clips look fine - it's just my title graphics and text that look bad (embarrasing).
    Remember that DVD-Video was designed for CRT TV sets, and was a major step up from VHS tape. However, when viewed on an HD computer monitor, or HD TV *, it is still ONLY 720 x 480, with is about 1/4 of the resolution as 1920 x 1080, which is about what we are used to seeing on those display devices. That is but only 25% of the quality. It can never look as good as HD material.
    Good luck, and if I missed something, please point that out to me.
    Hunt
    * With the advent of BD players, and up-rezzing DVD players, things HAVE improved, when viewing a DVD-Video on an HD TV. The newer players have up-rezzing chips, that do a very good job of "improving" the viewed material's quality. However, even with those amazing chips, DVD-Video will NEVER be as good as a full-HD source. Also, computers do not have those up-rezzing chips, so when one views a DVD-Video on a high-rez computer monitor, it will still look pretty bad. There ARE a couple of new DVD software players, that improve the quality of DVD-Video played on a high-rez computer monitor, and a few look fairly promising. I speculate that we will see some more development in the DVD-Video area, especially as BD is not proving to be the big seller, that many promised. Even 3D is not helping BD realize its promise.

Maybe you are looking for

  • A good project management app?

    I'm working on a large project (a book) and am looking for something to keep my deadlines together and to break my work into manageable chunks. I know there are a lot of good programs like OmniPlan, but I just need to plan out my own project-I'm not

  • Duplicating a database restored to disk instead of ASM

    Hello, I have the primary database, a RAC and it has all the archivers on ASM. When I do a duplicate command, archivers are restored to $ORACLE_HOME/dbs datafile 20 switched to datafile copy input datafile copy RECID=26 STAMP=778627959 file name=+DGD

  • How to post "Last update..."

    Is there a way to automatically indicate on a page when it was last updated? I searched "last update" on iWeb Help and this forum, but came up empty.

  • Hyperlink in Java Script Item

    Hi Java-Experts, can anyone send me an example for following problem: 1) I want to open a hyperlink (http://www.sap.com) in a frame (iframe1). Therefor i need a function, that i can call later with a button. 2) Is it possible to open a web Template w

  • Eul on different database

    until now we have been creatin eul in the same database whose tables we are accessing in the discoverer. but now i want to create this discoverer eul in another database so that load may be balanced. for that i created it in another database. then cr