Workload seemes not be balanced acoss 2 nodes

Hi All,
My DB is 11.1.
We have a sevice named daily_batch and we have assgined 2 nodes(node1 and node2) to this sevice.
And in client tns,both load_balance and fail_over are set to on or yes.
The application has run for years with no obvious problems. But when reading awr reports for node1 and 2 within the same period, I have found that node2 always has less workload than node1.
Can someone tell me how to check awr report to verify that the workload has been balanced across these 2 nodes,　please?
Best regards,
Leon

user12064076 wrote:
The difference is too much.And yes, there may be some other SQLs running on node 1. But shouldn't Oracle balance the workload more actively in this case?That depends on the method used to load balance. Are you using the Listener and a load balance TNS connection request? Or are these database jobs that are scheduled without "instance affinity"? Are you using database services?
Also - does a performance problem or bottleneck result with the current load balancing you are observing?
Since most of the SQLs are executed in parallel in our batch, I suspect the PGA will be more essential than SGA.And in my opinion, PGA can't be shared across nodes like SGA (no cache fusion for PGA). So I think it's more crucial for Oracle to distribute the sessions evenly.SQL statements do not use PGA - unless they are run from PL/SQL code and that code does a lot of cursor row fetching (pulling data from the SGA into the PGA).
What's your opinion?That we're going to loose against the All Blacks this weekend and that the couch should have been fired last year already. (well, you did ask! ;-) )

Similar Messages

2 nodes in a RAC not load balanced well

Our db is 2 nodes RAC with version of 10.2.0.3.0 on window 2003 server. I am wondering what else we may need to look into besides tnsnames.ora file to well balance the load between those two instances. Currently our
db is not well balanced based on the following two things:
1) query against gv$session
2) different amount of archive log files created in those two servers
Any help is greatly appreciated.
Shirley

1) query against gv$sessionMay be check the load on the individual servers as well and check to make sure that the LOCAL_LISTENER and REMOTE_LISTENER parameters are set correctly.
2) different amount of archive log files created in those two serversI don't think measuring this would be a valid metric to evaluate the effectiveness of load balancing and this is not taken into consideration by oracle while load balacing the connections....
HTH
Thanks
-Chandra Pabba

Application deployed on one node is not getting displayed in second node

Our environment is linux x86_64 and FMW version 11g,weblogic 10.3.4.0 ,soa 11.1.1.4.
We have installed weblogic cluster :
node1: Admin server,soa_server1
node2:soa_server2
when we deploy any soa application in one node it is not getting published in second node.We have taken oracle support also still problem is not solved.
They told us to configure coherence ,we have taken owc from metalink .
very urgent.
Any one can help me.

You have a cluster consisting of soa_server1 and soa_server2 or are these stand-alone WebLogic instances?
Is soa-infra active on soa_server2?
Can you check if soa-infra can be reached on both the server instances (http://hostname:port/soa-infra/)
When soa_infra cannot be reached on soa_server2 can you check the logging to see what errors
are occuring.
Some examples that set-up a clustered envionment can be found here: http://middlewaremagic.com/weblogic/?p=6872
and here: http://middlewaremagic.com/weblogic/?p=6637

HT201272 You seems not to understand what I mean and what I'm having like problem. I still have my payment recut from October of this year when I bought 9 songs in the iTunes Store from my iPhone 4S. The problem is from all the 9 songs, 7 are still avail

You seems not to understand what I mean and what I'm having like problem. I still have my payment receipt from October of this year when I bought 9 songs in the iTunes Store from my iPhone 4S. The problem is from all the 9 songs I've paid for, only 7 are still available from this list on my iPhone. There is no possibility to download the other 2 without paying for them. I've spoke to the lady from Mississippi on the phone 2 days ago from about 2 hours calling from Belgium but unfortunately she couldn't help me. It's the 3rd time I complain about this. How many time shall I pay for the same songs?? If you can access my music list and my past receipts payment you will be able to find out what I mean. I went back on iTunes I've found the the songs I already downloaded in October that should be on my playlist but if I click on them it will charge me again 0,99 cents. It's been 3 years I've been using the same apple ID with my iPhones. I just wand to get my songs back without having to pay them twice or 3 times

1. iTunes won't offer cloud downloads for songs that it "thinks" are in your library, even if it "knows" the files are missing. If you've exhaustively searched for the missing files and there is no prospect of repair by restoring to them to their original locations, or connecting to new ones, then delete that tracks that display both the missing exclamation mark and are of media kind Purchased/Protected AAC audio file. Don't hide from iTunes in the cloud when asked, close iTunes, then reopen. You can download from the cloud links or iTunes Store > Quicklinks > Purchased > Music > Not on this computer > All songs > Download all.
2. Why? Not sure, perhaps 3rd party tools or accidental key presses combined with previously hidden warning messages when trying to organize the library. There is a hint that using the feature to downsample media as it is synced to a device may also be involved, though I've not replicated it. Whatever the reason a backup would protect your media.
tt2

I have OS 10.4.11 and iTunes 9.2.1 (5). My iPhone 4s does not appear in iTunes. only iPhoto recognize my iPhone. Update of iTunes seems not possible. How can I make appear my iPhone in iTunes?

I have OS 10.4.11 and iTunes 9.2.1 (5). My iPhone 4s does not appear in iTunes. only iPhoto recognize my iPhone. Update of iTunes seems not possible. How can I make appear my iPhone in iTunes?

From the box the iphone came in:
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.5.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.5 or later (free download fromwww.itunes.com/download)"
You will need Mac OS 10.5.8 or later in order to get itunes 10.5 or later, in order to connect your iphone.

[SOLVED!] KDE 4.11 - Window Manager seems not to be running?

Greetings,
I still seem unable to fix the fact that systemsettings will run. However it will run if you do kdesu systemsettings.
Doing so I started checking around in it and thought I'd look at the desktop effects, when I was greeted with this:
So, I am guessing that the window borders and buttons are a figment of my imagination....
This is after me pretty much starting over with KDE, removing the .kde and .kde4 folders.
Help?
Edit: That pic seems to not link right. Yay. Basically it says that effects can not be activated or whatever because a window manager seems not to be running. The irony of it is you can see the fact that there are window borders and buttons and such, evidence of a WM...
I wonder if there is something here that is related to me not being able to run systemsettings... yet systemsettings will run fine in any other environment - including Gnome Shell.
Another thing, KDE 4.11 ran great in testing and kde_unstable. Once it went to extra, things happened. I find that odd. Maybe something is missing on my end that most archers already have?
Edit2: fixed image link
Last edited by mythus (2013-08-25 20:49:38)

No omeringen, Nvidia user.
I can try again Thaodan since I've had some updates come through (and weeded out some dot files). Last time I tried I saw OpenGL 2 selected. Trying to change to 3 or anything else also got the screenshot in my OP.
I'll log into KDE and see if it still does the same, after a brief check for last minute updates.
EDIT: OK, so I can mark this as solved. I found an odd dot file, who's name excapes me but deals with kde sessions, just sitting around in the home folder. Once I deleted it and restarted, I found that not only System Settings finally ran again as a user, but I could also change and apply desktop effects. Peculiar. I thought that maybe it was a dot file that was causing the problem, that wasn't in the .kde or .kde4 folder. It just took finding it and removing it.
I wish I knew more to tell, but this at least solves my issue, and the issue with the non-running-as-user system settings I had posted in another thread (thinking that they were separate events. Thanks again for all your help guys!
Last edited by mythus (2013-08-25 20:49:05)

Strategy escalation not appearing in the escalation node of UWQ.

Hi,
Module: Advanced Collections
Customer has done the following test case:
There are three work items in the collection strategy. First two work items are automatic and completed successfully. Third work item is manual and need to be escalated to manager, if it is not closed within time limit.
Escalation for third Work Item has been setup. On the expiry of the time limit, system sends a email notification to the manager of the collector but this escalation is not appearing in the escalation node of the collectors work queue.
Checked the collections implementation guide and found the following:
"In the Escalation section, enter Yes and a closure time if you want an "automatic"
notification sent to the collector’s manager if the work item is not completed in the
specified time period"
It has not specified whether the escalation appears in the workqueue node of the manager.
I would like to know whether the escalations should appear in the escalation work queue node or is this an intended functionality.
Thanks and regards,
Hareesh

Hareesh,
As I see the work items a resource after esclation will only in the escalated node but not in the queue of the manager.
My requirement was to show the UQW items of the subordinates of a manager in the UWQ apart from his own. I am not sure the R11.10 and above with some patch levels has that functionality out of the box, but I had to change the metadata view defnition to show that info in the UWQ.
Going back to your question, escalations use task architecture. As the task owner is still the resource who holds the task of completing it, the task is not "assigned" to the manager but just a mail is sent keeping in the different bucket.
Hence that **May** not show in the manager queue. But if you change the metadata views, you can show all of my subordinates tasks to the manager as well which includes the escalations.
You can try using the task escalations screen to reassign the owner to be manager thus taking the task out my list and showing it up in my manager's list.
I have not tested this but you can try this option and use as a process step.
Thanks
Nagamohan

Gallery: Onchange seems not to fire

Hi everybody,
i am at a loss with IE6 and 7. My foto gallery
http://www.hannes-renate.de/bali06/index.html
is functioning with Firefox, but with the Internet Explorer it
seems that the onchange unit of the select element to choose the
album seems not to fire for the first option element and therefore
Spry will not further develop the thumbnails. Choosing another
option in the select box is ok. But going back to the first option
element 'Reisfelder' there is no action.
What are i doing wrong?
Hannes Löhr

Hi Kin,
thank you for your effort. Unfortunately your suggestion has
no effect on the behaviour of the page. Having no diagnostic tools
in the IE (beside the DOM Explorer, which shows none of the select
options being selected!?), i have to take the hard way: removing on
gimmick after the other until the failure doesn't show.
Where did you see the error in my page?
What diagnostic tools do you use?
Hannes Löhr

CSCtw80338 - Database is not in sync on both nodes alert in RTMT

We are constantly getting a rtmt alert from UCCX that SyslogSeverityMatchFound events generated.
Please see the alert below:
At Wed Dec 31 21:02:46 AST 2014 on node 10.120.180.20, the following SyslogSeverityMatchFound events generated:
SeverityMatch : Alert
MatchedEvent : Dec 31 21:02:17 PUBNAME local7 1 : 572: PUB DNS ENTRY: Dec 31 2014 06:02:17 PM.964 UTC : %UC_LIB_DATABASE-1-DB_NOT_IN_SYNC: %[AppID=Cisco Unified CCX Cluster View Daemon][ClusterID=][NodeID=HMCBTUCCXPUB]: Database is not in sync on both nodes
AppID : Cisco Syslog Agent
ClusterID :
NodeID : PUBNAME
TimeStamp : Wed Dec 31 21:02:17 AST 2014
Its looks like below bug;
Database is not in sync on both nodes alert in RTMT
CSCtw80338
Description
Symptom:
RTMT alert should be informational only.
At Thu Dec 08 04:00:31 EST 2011 on node 10.251.254.120, the following SyslogSeverityMatchFound events generated:
SeverityMatch : Alert
MatchedEvent : Dec 8 04:00:03 PHLCC002 local7 1 : 32:
PHLCC002.cozen.com: Dec 08 2011 09:00:03.191 UTC :
%UC_LIB_DATABASE-1-DB_NOT_IN_SYNC: %[AppID=Cisco Unified CCX Cluster View Daemon][ClusterID=][NodeID=XXXXX]: Database is not in sync on both nodes AppID : Cisco Syslog Agent ClusterID :
NodeID : XXXXX
TimeStamp : Thu Dec 08 04:00:03 EST 2011
Conditions:
RTMT alert for UCCX 8.x
Workaround:
None
Details
Last Modified:
Dec 10,2014
Is there a way to fix this ?
UCCX version is 10.5

Getting this exact type of error and we are also running UCCX 10.5

Database is not in sync on both nodes alert in RTMT

We are constantly getting a rtmt alert from UCCX that SyslogSeverityMatchFound events generated.
Please see the alert below:
At Wed Dec 31 21:02:46 AST 2014 on node 10.120.180.20, the following SyslogSeverityMatchFound events generated:
SeverityMatch : Alert
MatchedEvent : Dec 31 21:02:17 PUBNAME local7 1 : 572: PUB DNS ENTRY: Dec 31 2014 06:02:17 PM.964 UTC : %UC_LIB_DATABASE-1-DB_NOT_IN_SYNC: %[AppID=Cisco Unified CCX Cluster View Daemon][ClusterID=][NodeID=HMCBTUCCXPUB]: Database is not in sync on both nodes
AppID : Cisco Syslog Agent
ClusterID :
NodeID : PUBNAME
TimeStamp : Wed Dec 31 21:02:17 AST 2014
Its looks like below bug;
Database is not in sync on both nodes alert in RTMT
CSCtw80338
Description
Symptom:
RTMT alert should be informational only.
At Thu Dec 08 04:00:31 EST 2011 on node 10.251.254.120, the following SyslogSeverityMatchFound events generated:
SeverityMatch : Alert
MatchedEvent : Dec 8 04:00:03 PHLCC002 local7 1 : 32:
PHLCC002.cozen.com: Dec 08 2011 09:00:03.191 UTC :
%UC_LIB_DATABASE-1-DB_NOT_IN_SYNC: %[AppID=Cisco Unified CCX Cluster View Daemon][ClusterID=][NodeID=XXXXX]: Database is not in sync on both nodes AppID : Cisco Syslog Agent ClusterID :
NodeID : XXXXX
TimeStamp : Thu Dec 08 04:00:03 EST 2011
Conditions:
RTMT alert for UCCX 8.x
Workaround:
None
Details
Last Modified:
Dec 10,2014
Is there a way to fix this ?
UCCX version is 10.5

Which UCCX version are you using? There is already a bug opened for 8.0. Please check below link for same.
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtx48905

Siri seems not included in Singapore's iPhone 4S, why?

siri seems not included in Singapore's iPhone 4S, why?

Heve you turned Siri on? The default setting is that Siri is switched off on a new 4S. Go to Settings>General and you'll find the settings for Siri there.

HT1665 Bluetooth on my IPhone 3GS seems not function properly

Bluetooth on my IPhone 3GS seems not function properly. How to check and rectify it.

It would help if you explained what you mean when you say it doesn't function properly. What are you attempting to do? What happens when you try? What troubleshooting steps have you already taken?

The function AirDrop on my Mac BookAir seems not to work, not detect my iPad. How to fix this?

The function AirDrop on my Mac BookAir seems not to work, not detect my iPad. How to fix this?

AirDrop on iOS devices (iPads, iPhones, iPod touches) can only AirDrop things with other iOS devices. AirDrop on Mac can only AirDrop things with other Macs.
I hope this solves your question.
Austin

ORACLE RAC - 11G 2-NODE- OEL , asmdisk listdisk not showing disk in second node

Hi,
i am using vmware to install rac -2node .asmdisk listdisk not showing disk in second node.
my SCSI values are hardware : 0:0
hardware 2 = 1:1
please suggest. do i need to change the above parameter values.

Please elaborate more on this issue. Is this related to EBS? What are you trying to accomplish? Are you following any link/doc?
Thanks,
Hussein

DME and FI posting not in balance.

Hello Experts,
Can any one please provide information on DME and FI posting not in balance.
We are working on Concurrent employment, my client have problem with in balance amounts.
Like GL account we run 10 batches together and compare with DME and we find lots of difference between two.
We run wage type report also and again we find difference too.
Please provide your adivse and suggestions how to over come with this situation. We want to get balance between DME and FI postings.
Thanks,
DV

hello parul,
For the error "status object is not assign to status profile" check wether the status profile is assigned to that WBS. If not then assign the status profile to it.
If still the problem exists then check in status profile transaction OK02 for that perticular user status in object type WBS element is selected or not.
Also check whether system status of your WBS element is Released.
Regards,
sudhir

Workload seemes not be balanced acoss 2 nodes

Similar Messages

Maybe you are looking for