WorkProtect mode is not working for CRM (BSP) :(

Hi All,
I need your help regarding this issue:
Requirement : Customer want to access ICWC (BSP) application in portal such that :
 1. When a user clicks on the ICWC tab the BSP iView should open in a new window .
 2. It should not open a new window if user again clicks on the same iView when one already open .
 3. If one ICWC window is active and user clicks again on the same iView it should give a pop-up saying 'Please save the data first'.
Solution : 1. I have achieved first two things .
 2. For third one I thought WorkProtect mode of EP will be useful and I did following config :
1. Created a HTML document with following code
<A HREF="myLink"
[code]onclick="return EPCM.doNavigate
 ('ROLES://portal_content/myRole/myIView')"
>
This is an HTML Link
</A>
[/code]
'ROLES://portal_content/myRole/myIView' --> I have given the PCD location of my BSP iView.
2. Uploaded the HTML document in the KM repository.
3. Created a KM Document iView .
4. Assigned it to a role.
When I preview that iView and click on 'This is an HTML Link' it gives me 'Portal runtime error'.
I understand when I open this iView it is actually looking for "myLink.default" iView and when it doesn't get that it gives error . But this is the only way I could find to
enable WorkProtect mode for BSP.
Can you please help me resolving this issue .
Thanks & Regards,
Amit Kade

Here is a good place to get started:
http://support.mozilla.com/en-US/kb/Cannot%20view%20full%20screen%20Flash%20videos

Similar Messages

In IE 11 copy and paste not working for CRM 7.1

The PC’s with the problems are running Windows 8.1 running IE 11
The users are copying the numbers from a spreadsheet, and pasting it
into
the search criteria in SAP CRM. The process is the same whether you are
searching for Service Orders, Service Contracts, Accounts, Service
Confirmation.
In this process when we are trying to paste the search, once after pasting it is running and running and never responded.
Please help me. Helpful Answer is appreciable.
Regards,
Prathyusha.

Hi
Thanks for solution
We are running in Compatability mode only. But still the Issue is happening,
what is Quirks Mode? Can you let me know, so that i am test.
Regards,
Prathyusha

Setting delayedautostart mode is not working for few services AudioEndpointBuilder, SENS

Am I missing some this in this command.
Senthil Kumar M

Hi Senthil,
I found another document to help us to understand this issue:
The Service Control Manager starts services that are configured for delayed automatic start after all of the automatic-start threads have finished starting. The Service Control manager also sets the priority of the initial thread for these delayed
services to THREAD_PRIORITY_LOWEST. This causes all of the disk I/O performed by the thread to be very low priority. Once a service finishes initializing, the priority is set back to normal by the Service Control Manager. The combination
of the delayed start, low CPU and memory priority, as well as the background disk priority greatly reduce the interference with the user's logon.
Many Windows services, including the Background Intelligent Transfer Service (BITS), Windows Update Client, and Windows Media Center, use this new start type to help
improve logon performance after a system boot. To configure a service for delayed automatic start, you can create a REG_DWORD value called
DelayedAutoStart in the service's configuration registry key under
HKLM\SYSTEM\CurrentControlSet\Services.
This needs us to modify the registry value, please also note serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it.
For more detailed information, please check this article:
WS2008: Startup Processes and Delayed Automatic Start
Best Regards,
Anna Wang

Search criteria drop down not working in CRM 7.0 Web UI for few users.

Hi Gurus,
i have come across problem in sap CRM 7.0 web ui,
it goes here....
when a user opens a webui page and goes to "account management" work center page under "search" work center link group... he selects "accounts"(or contacts or account plan)... there in search criteria fields..(account id,role,country etc ) drop down list is not working for him...he can only see only which is maintained as default but if wants to change it by drop down list selection it is not possible...for me it is working ..can u please suggest what is missing in his case..?
if it is authorization issue please tell which object should i check..?
Thanks,
gaurav

Hi,
Please check if the user is assigned to a Business Partner.If not then assign the User to a Business Partner and check.
Regards.
Deepak Ramchandran.

Debugger not working for BSP application

Hi All,
I have 4.6C sap installation and the debugger is not working for BSP Application even when i hard code the break points.
Can anyone help me on this issue.
Thanks and Regards
Shilpa

Hi Shilpa,
How many number of sessions are open ? If there are already six sessions open and then you try and get the debugger, it will not start, and you won't be able to catch that error also...!
Other than that there is no possibility that the debugger doesn't start, unless ofcourse, the logic doesn't reach the debugger point....
Hope this helps.
Do reward each useful answer..!
Thanks,
Tatvagna.

Why is the 'Next' button in 508 Screen Reader mode not working for RichTree

Hi ADF Experts,
My JDeveloper version is 11.1.1.8. The 'Next' button in 508 Screen Reader mode for tables works fine.
However, it does not work for trees, I can see only the first 23 or so items.
Any ideas?
What am I missing here?
Regards,
-ab

There is no official JDeveloper version is 11.1.1.8.0!
If you use an internal build ou should post to an internal forum.
If you use an official version please tell us which on.
Timo

7.1.2 update failed. Now my iPhone 5 is in recovery mode and hard resetting does not work for me. iTunes also will not detect my phone now

I did my 7.1.2 update via iTunes. Half way through it stopped working saying it does not detect my phone. Now my iPhone 5 is in recovery mode and hard resetting does not work for me. iTunes also will not detect my phone now

Thank you SO very much for posting this. I had the exact issue with my iPad Mini after the same upgrade. Hard reset failed, computer would not recognize iPad. I had read all the other instructions and nothing worked.... YOUR SOLUTION WORKED FOR ME - with a slight variation.
I followed your lead and connected my iPad Mini to another computer, fired up iTunes, it saw the iPad Mini in Restore Mode and allowed me to go into Restore (yes, it wiped all of the data but I have a back up on the other computer that would not see it after the failed update). It installed the latest iOS 7.1.2 as well. I then disconnected it from that computer, reconnected it to the computer that would not see it prior and it then saw it as a new iPad and allowed me to Restore my backup and now it's all good!
I detailed my steps only because you downloaded the previous version - 7.1.1 whereas I downloaded the latest version (7.1.2) and then restored my back up.

Select All in a table does not work for Drag and Drop

Hi. I am using Jdeveloper 11.1.1.2 but have also reproduced in 11.1.1.3.
I am trying to implement drag and drop rows from one table to another. Everything works fine except when I do a Select All (ctrl-A) in a table, the table visually looks like all rows are selected, but when I try to click on one of the selected rows to drag to the other table, only the row I click on is dragged.
I tried setting Range Size -1, fetch mode to FETCH_ALL, content delivery to "immediate" but nothing works.
I even have reproduced not using a view object but just a List of beans with only 5 or 10 beans showing in the table.
Does anyone know how to get Select All to work for a Drag Source?
Thanks.
-Ed

Frank-
OK, thanks for looking into that. I also submitted this service request, which includes a simple sample app to demonstrate the problem:
SR #3-2387481211: ADF Drag and Drop does not work for rows in table using Select All
Thanks again for the reply.
-Ed

Voicemail notifications not working for iphone 4s

voicemail notifications not working for iphone 4s

I had the same problem and after a lot of research here and on Verizon I finally discovered that it was an app named Onavo Extend that was preventing my voicemail from working. Other people have had success resetting their phone or network settings, disabling and reenabling SIRI, or deleting the Neilsen app (which I didn't have) but those options didn't work for me. A lot of mods have claimed that this is not an Apple problem but if it is caused by an app that Apple allows to be sold in their app store, then it is an Apple problem, not a carrier problem. Of course, sometimes its just an ID 10 T problem.

I have a mac which plays the boot sound but the screen stays black. Recovery mode does not work, as the keyboard is wireless. What do I do?

What it says in the title.
I have an older mac and it worked perfectly until about an hour ago when I shut it down because we needed the room dark for a presentation and the screen saver was putting out light.
Now it won't turn back on. It plays the start up music but the screen stays blank.
The CMD+OPT+R for recovery mode doesn't do anything, the keyboard is wireless so the command doesn't get to the computer and that's the only keyboard I have since that's the one it came with.
I'm looking at making a USB recovery disk but it says that I should click on "Options" in the Disk Utility but there is no options button or menu to click.
From here: OS X: About Recovery Disk Assistant in step 3 I get stuck.
Also it says that if I make a drive on this computer which has an older OS it might not work on the broken machine with Mavericks.
This machine literally worked and I turned it off and now it does not work and there seems to be nothing I can do... ***...

kodemage wrote:
well, then recovery mode does not work. I've tried all the key combinations I've seen on line. Command+R, Command+Option+R, Command+Option+P+R, none of these work.
I don't believe there is anything we can do on a forum to help then, you need to take it into a AASP and have it professionaly diagnosed. If you don't know how to locate an AASP in your area you can begin by using Contact Apple for support and service
Good luck.

Auto resolve not working for cached outlook

We recently migrated from Exchange 2007 to 2010. One thing we have noticed is that auto resolve (to alias name) is not working for Outlook in cached mode. Not in cached mode or via owa, it seems to work fine.

Hi,
Does the issue happen to all users or some specific users?
Please check whether the issue happens in Outlook Online mode. If the issue only happens in Cached mode but not in Outlook Online mode, please create a new Outlook profile to have a try.
If it doesn't work, please restart Microsoft Exchange File Distribution service in Exchange 2010 and Exchange 2007 then click Send/Receive > Send/Receive groups > Download Address Book to have a try.
Regards,
Winnie Liang
TechNet Community Support

People picker is not working for ie11 but working fine for other lower version

i am using sharepoint 2010 and windows authentication
recently i have updated my ie to ie11 and problem goes here.
when i try to select from people picker, there are an unexpected error happened
however when i use other ie version, people picker work fine, what goes wrong?
i have already added my system as trusted site
if there any others thing i miss out?

Hi,
According to your post, my understanding is that People picker is not working for ie11 but working fine for other lower version.
IE 11 is known to have compatibility issues on SharePoint 2010, please make sure to:
first of all, try installing latest update for IE 11 (several compatibility issues were fixed since the first release)
add the site to compatibility view (in IE> Tools> Compatibility view settings> type site name> add)
add the site to trusted sites and set the zone security level to low (in IE> Internet Options> Security> trusted sites> sites>add your site there> ok> custom level> select low> reset> ok)
You can use developer tools (f12) and set browser mode to the version that is most compatible with your environment.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Middleware - Delta load is not working from CRM to R/3

Hi Experts,
Our client is using SAP-R/3 4.7 and CRM 5.0
Connectivity was established via Middleware and initial load of Customizing objects and Master data( Customer and Material) was finished successfully.
Now if i create any Customer or Product in R/3 they were replicating to CRM(Delta load), but this delta load is not working in CRM to R/3 direction.
In CRM Administration console( Transaction code - SMOEAC) R/3 site was maintained and subscribed for Publications - All Business Partners, All Business Transactions and All Business partner Relationships.
Can anybody help me out that why Delta load is not happening from CRM to R/3 Direction.
Thanks in advance
Nadh.

Hi Nadh,
for BPs check PIDE settings once agiain, i hope u ve already downloaded all mandatory obects for BP, because u already told that replication from r/3 to crm is ok, so check once again PIDE settings (CRM to R/3),
for Products u ve to manual upload only
for Products
This may be necessary because the data is required in the OLTP System for a number of logistical processes such as procurement, inventory management, billing, financial accounting, controlling.
cheers
Ranga

Transaction launcher not working for custom business role

Hi Experts,
I am facing a very weird problem where the transaction laucher define for BOR transaction is working for one business role(Z business role Customized one) but its not working for other business role (Z business role).
to emphasize further we have the code:-
case ls_attributes-object_type.
    when lc_z23 or lc_z25.
      lv_logical_link = lc_ZITISU.
    when lc_BUS2000115.
      lv_logical_link = lc_ZITERP1.
    when others.
      lv_logical_link = lc_ZITERP2.
endcase.
l_if_navigation = cl_crm_ui_navigation_service=>get_instance( me ).
IF l_if_navigation IS BOUND .
Navigate to transaction launcher using link id
    l_if_navigation->navigate( iv_link_id = lv_logical_link ).
ENDIF.
in this the logical link is is lc_ZITISU whenever this BSP application is called from both the business roles but in one the window opens up for BOR transaction whereas when we login again using different business role the code is the same as given above. I mean the sam logical link id is used and navigated to but window is not opening for transaction launcher as it happens for the previous business role.
Request your help to resolve this issue.
Thanks,
Rajwin

Hi,
I tried by applying the PFCG role id of business role which was working to the business role id of the one for which it wasn't working and then try testing whether the transaction launcher is triggering. But the transaction launcher screen is still not opening even after doing this.
Probably there's something else too which is causing the problem. Request your inputs on this,
Thanks,
Rajwin

Filtering not working for newly added child objects in master-detail table

Hi,
I am using Jdeveloper 11.1.1.4 version.
Problem scenario:
Filtering of records is not working for newly created child objects in a master-detail scenario.
Steps to reproduce this issue using HR Schema (using LOCATIONS and DEPARTMENTS table ) :
1. Create Business components (EO's & VO's ) for LOCATIONS & DEPARTMENTS table)
1. Create a .jspx page and insert a readonly master table of Locations
2. Insert a child table (inline-edit table) of Departments and enable filtering
4. For the child table, drag and drop CreateInsert operation as a toolbar button .
5. Create a new child record using the toolbar button and enter data .
6. Filtering on the newly created child record's attributes does not work.
Please note that the same filter works for existing child records.
Any suggestions for resolving this issue?
Thanks,
Vikas

Found from Fusion Developer's Guide the following snippet about QBE functionality :
"+When you create data controls, all data collections will automatically include a Named Criteria node with an All Queriable Attributes criteria. This is the default view criteria that includes all the searchable attributes or columns of the data collection. You cannot edit or modify this view criteria+. "
So, the question is if the implicit view criteria cannot be edited, how else to set the query execution mode to "Both" ?
Shouldn't ADF BC support this by default? Is this a bug?
Note:- If you create a maste-detail table using POJO datacontrols, filter works correctly for newly created child records also .
This seems to be an issue with ADF-BC datacontrols only.
Thanks,
Vikas

WorkProtect mode is not working for CRM (BSP) :(

Similar Messages

Maybe you are looking for