Worksetmap not showing correct links when we launch via quick link

Hello Portal gurus,
My Scenario:
I'm using EP7 (SP
Launch a quick link from a HTML to display Worksetmap iview.
Problem:
Displays the whole role node of links but not the relevant links.
Displays properly when we click on the relevant DTN(detailed level navigation node(has the quicklink)) node.
Any suggestions?
Thanks in advance.
Cheers,
Surya

Hi, the username and password on D-Link routers is case sensitive, particularly the first letter of the username.
My Cisco Network Magic Configuration:
Router: D-Link WBR-2310 A1 FW:1.04, connected to Comcast High Speed Internet
Desktop, iMac: NM is on the Windows Partition, using Boot camp to access Windows, Windows 7 Pro 32-bit RTM, Broadcom Wireless N Card, McAfee Personal Firewall 2009,
Mac Partition of the iMac is using Mac OS X 10.6.1 Snow Leopard
Laptop: Windows XP Pro SP3, Intel PRO/Wireless 2200BG, McAfee Personal Firewall 2008
Please note that though I am a beta tester for Network Magic, I am not a employee of Linksys/Cisco and am volunteering my time here to help other NM users.

Similar Messages

Itunes store does not show on ipad when i launch app its pages are blank

itunes store does not show on ipad when i launch app its pages are blank

This indicates there might be an issue with the time configuration on the device.
Go to Settings > General > Date and time. See if Set automatically is switched to on. If so, switch to off and ensure you set date, time and time zone manually and correctly.
Power off the device (hold sleep button for four seconds, then slide to power off), then power back on.
If issue persists, switch Set automatically back to on, and if not resolved then restore the device.

Fonts not showing correctly only when on my account page on app store

fonts not showing correctly only when on my account page on app store

Firstly, make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
Secondly, try all the other ports on your computer, even a number of times.
Thirdly, if you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
Failing all that, see here - http://support.apple.com/kb/TS1538 for Windows and http://support.apple.com/kb/TS1591 for Macs
And failing all that put the device into Recovery mode. See here and note the paragraph 'If you restore from a different computer.... ' down near the bottom of the page -
http://www.apple.com/support/ipad/assistant/itunes/

Not showing correct output when parsing the date

//WAP the gives the details of employees
import java.io.*;
import java.util.*;
import java.text.Format;
import java.text.DateFormat;
import java.text.ParseException;
import java.text.SimpleDateFormat;
class employee
private String nm,curr_dt;
private Date dob,doj;
private int salary;
           employee()
              nm="\0";
              dob=null;
              doj=null;
              curr_dt=null;
              salary=0;
           void getdata()throws IOException
              String dt;
              BufferedReader br=new BufferedReader(new InputStreamReader(System.in));
              //we can create date with these 3 type of objects
              Format fm=new SimpleDateFormat("dd-mm-yyyy");
              DateFormat df=new SimpleDateFormat("dd-mm-yyyy");
   //object of base class are type compatible with the object of derived class
              SimpleDateFormat sdf=new SimpleDateFormat("dd-mm-yyyy");
              System.out.print("\nEnter the name of Employee : ");
              nm=br.readLine();
              try{
              System.out.print("\nEnter the date of birth of Employee : ");
              dt=br.readLine();
              dob=(Date)fm.parseObject(dt);
              System.out.print("\nEnter the date of joining of Employee : ");
              dt=br.readLine();
              doj=df.parse(dt);
              }catch(ParseException e){
              Date d=new Date();
              curr_dt=sdf.format(d);
              System.out.print("\nEnter the salary of employee : ");
              salary=Integer.parseInt(br.readLine());
           void putdata()
              System.out.println("\n\n\nEmployee Name : "+nm);
              System.out.println("\nDate of birth : "+dob);
              System.out.println("\nDate of joining : "+doj);
              System.out.println("\nCurrent date : "+curr_dt);
              /*if((doj-curr_dt)>1)
                   salary+=3000;
              System.out.println("\nSalary of Employee : "+salary);
class emp
public static void main(String str[])throws IOException
       employee emp[]=new employee[1];
       System.out.println("\nEnter the detail of employees \n\n");
       for(int i=0;i<1;i++)
            emp=new employee();
emp[i].getdata();
System.out.println("\n\nDetail of employees are\n\n");
for(int i=0;i<1;i++)
emp[i].putdata();
}*Output:*
Enter the detail of employees
Enter the name of Employee : Rajendra Sharma
Enter the date of birth of Employee : 10-10-1979
Enter the date of joining of Employee : 05-09-2004
Enter the salary of employee : 2000
*it is not showing date in the "dd-mm-yyyy" format and not showing correct month as well*
Detail of employees are
Employee Name : Rajendra Sharma
Date of birth : Wed Jan 10 00:10:00 IST 1979
Date of joining : Mon Jan 05 00:09:00 IST 2004
Current date : 17-08-2008
Salary of Employee : 2000

Hi,
Use below code that will help u to sort ur problem.
import java.io.*;
import java.util.*;
import java.text.Format;
import java.text.DateFormat;
import java.text.ParseException;
import java.text.SimpleDateFormat;
class employee
private String nm,curr_dt;
private Date dob,doj;
private int salary;
private String dobb,dojj;
employee()
nm="\0";
dob=null;
doj=null;
curr_dt=null;
salary=0;
void getdata()throws IOException
String dt;
BufferedReader br=new BufferedReader(new InputStreamReader(System.in));
//we can create date with these 3 type of objects
DateFormat fm=new SimpleDateFormat("dd-mm-yyyy");
DateFormat df=new SimpleDateFormat("dd-mm-yyyy");
//object of base class are type compatible with the object of derived class
SimpleDateFormat sdf=new SimpleDateFormat("dd-mm-yyyy");
System.out.print("\nEnter the name of Employee : ");
nm=br.readLine();
try{
System.out.print("\nEnter the date of birth of Employee : ");
dt=br.readLine();
dob=(Date)fm.parseObject(dt);
dobb= fm.format(dob);
System.out.print("\nEnter the date of joining of Employee : ");
dt=br.readLine();
doj=df.parse(dt);
dojj = df.format(doj);
}catch(ParseException e){
Date d=new Date();
curr_dt=sdf.format(d);
System.out.print("\nEnter the salary of employee : ");
salary=Integer.parseInt(br.readLine());
void putdata()
System.out.println("\n\n\nEmployee Name : "+nm);
System.out.println("\nDate of birth : "+dobb);
System.out.println("\nDate of joining : "+dojj);
System.out.println("\nCurrent date : "+curr_dt);
/*if((doj-curr_dt)>1)
salary+=3000;
System.out.println("\nSalary of Employee : "+salary);
class emp
public static void main(String str[])throws IOException
employee emp[]=new employee[1];
System.out.println("\nEnter the detail of employees \n\n");
for(int i=0;i<1;i++)
emp=new employee();
emp[i].getdata();
System.out.println("\n\nDetail of employees are\n\n");
for(int i=0;i<1;i++)
emp[i].putdata();
thanks,
prabhu selvakumar.

Captivate 5 quiz review not showing correct answers when loaded to LMS

Hello All. I would really appreciate some help please. Despite the quiz review working correctly when published, i.e. both 'your answer' and 'the correct answer' captions appear in the review, on loading to LMS the review caption does not show the 'the correct answer is' , but instead 'you did not answer this question completely'.
Any ideas why this should be the case? I've attached screen shots of my quiz preferences for completenes.
Many thanks in advance.
Janey

Do the same modules evidence this behaviour when published and played outside the LMS, e.g. from a web server or on your hard drive?
If not, it's possible that some setting in the LMS is over-riding what happens at playback. You could try checking the box under LMS Customisation for Never Send Resume Data and see if that seems to make any difference. If the LMS is maintaining a record of some previous attempt at the same module then turning off Resume Data might show that up.

Discoverer Viewer not showing correct data when scheduled

Hi All,
I have a bit of an ongoing issue and cannot find an answer through Oracle.
We have an issue that when a cross-tab workbook is run manually in Desktop this returns correct data, when scheduled in desktop it returns correct data in desktop, but when opening the scheduled workbook in viewer, incorrect and irrelevant data is returned
Here is a little information on the field that is not returning correct data;
The field is based on a calculation, the calculation (lets call BOB) contains PL/SQL function concatenated with an NVL calculation, this other calculation is a DECODE. I have been playing with changing the content of the BOB calculation, by removing the PL/SQL function and the DECODE calc from BOB and scheduling the report, the data is returned in viewer, in fact i've attempted one without the other and this still does not return the correct data.
This version of discoverer that is not returning data is V 10.1.2.50.05. I've tested this on a later environment with Discoverer V 10.1.55.26 and the data is returning correctly through the sceduled report in viewer.
My questions;
1. Has anyone ever come across something similar to this in version 10.1.2.50.05
2. Is there any detail available regarding what upgrading to 10.1.55.26 offers?
3. Know any workaround for using PL/SQL calculations in a scheduled workbook? I am aware that not aggregable items will not be returned in v11 when scheduling workbooks.
Many thanks in advance for any help.
Simon

Bumping this thread
Thanks
Si

When accessing purchased via quick links my computer drops out

when going to purchased in the quick links - my computer ALWAYS drops out whilst trying to connect

Intermittent issues will point to a local network/wifi issue.
Reboot ATV and router, make sure both are up to date
Try ethernet
The home sharing connection will cut out if the iMac goes to sleep.

Siebel BIP report not show correct data when current view=my programs view

Dear All,
I have report that contain field approval,
which is when i login as 'SASKIA' as example then i want to print report budget request,
this report contain field approval like :
Employee Login
HOKIONO
BAMBANG
PONGKY
SASKIA
but when i print the report it just show:
Employee Login
SASKIA
and it happened only if i print report in 'MY Programs' view,
the report show ok in 'All Programs' view.
and when checked in siebel tools, IO Program Container(that used in report), the link already set to all.
Please help me on this.
Best regards
Cecilia

try adding a user property to your integration object:
User Property Name: "ViewMode"
User Property Value: "All"
see if it has any effect - for me it solved some issues with data not being displayed!
Benny

Zen not showing correct album when correct one is on mp3 f

I have come to notice that if you have two artists with the same exact album name, all those files will show the album art from the first atrist that comes alpahbetically. So if I have Artist A with album name Album and Artist B which also has the album name Album, when playing a song from Artists B from Album, it will display the album art from the Artist A Album. I hope I made that clear enough. Creative has to change the way the Zen handels album art because this is just not acceptable. I worked very hard to makre sure all my songs have the right album are and the right mp3 tags and then I go and am not able to appriciate my hard work. Does this happen to anyone else?

dominican44 wrote:
I have come to notice that if you have two artists with the same exact album name, all those files will show the album art from the first atrist that comes alpahbetically. So if I have Artist A with album name Album and Artist B which also has the album name Album, when playing a song from Artists B from Album, it will display the album art from the Artist A Album. I hope I made that clear enough. Creative has to change the way the Zen handels album art because this is just not acceptable. I worked very hard to makre sure all my songs have the right album are and the right mp3 tags and then I go and am not able to appriciate my hard work. Does this happen to anyone else?
I cannot tell by your post. Did you embed each cover in the ID3 tag?

Quotes in a page level item not showing up as " when used in a hyper link

Hi all,
In my app, I need to hyper link to a crystal report application with parameters from my page. I have a page level item that puts my parameter in quotes, but when the item is utilized in the hyperlink, the quotes come across as & q u o t ; (spaces were put in to the post to avoid html conversion) how can my string be used to appear the way I want?

I don't use Crystal Reports, but, in general, you should encode your URL. When you create your link, run the URL through utl_url.escape() first. Put it in your select statement.
E.G.,
select utl_url.escape('http://oracle.com/foo"bar') from dual;
will escape/encode the quotation mark and give you:
http://oracle.com/foo%22bar
This translates the " into a URL-safe escape code, %22, that should (I hope) be understood properly by your Crystal Reports server.
Good luck.

SharePont 2013 Document Library lookup Column Properties not Showing Correctly when editing in Word

Hi
I keep seeing this issue albeit intermittently. I have set up a doc library for my users which has a custom content type (lookup, metadata columns, etc) . They all appear perfectly most of the time except the lookup column. Sometimes is just
decides to display the title field of the current library and not the lookup list title . It is weird as it has been working perfectly for ages given the library is populated with valid documents.
There are some fixes listed here. Has anyone got any experience of this?
https://social.msdn.microsoft.com/Forums/azure/en-US/e0b55531-509c-4219-8113-61b3e488de69/document-library-metadata-properties-of-a-content-type-do-not-show-correctly-when-editing-in-word?forum=sharepointdevelopmentprevious
Freelance consultant

Hi,
According to your post, my understanding is that the lookup column not display well while editing in word.
Did you customize the Document Information Panel?
I recommend you edit your custom document information panel or create a new document information panel, then re-publish it to check whether it works.
https://support.office.com/en-gb/article/Create-or-edit-a-custom-Document-Information-Panel-for-a-content-type-b701a9af-3ea6-4c1a-9e1c-75363bd987c9?ui=en-US&rs=en-GB&ad=GB
Or you can also use the methods in the post you have pasted to check whether it works.
As the limitation of the environment, we could not reproduce the issue in our environment.
I would suggest you open a case to Microsoft Customer Service via Phone.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

Date and time not showing correct whe imported to Power query

Hi,
I have an Excel list that I imported to another Excel file via Power query. A few of the imported columns contains date and time, for example 2013-11-09 20:19. When imported to Power query this will show as 41587.84652777778 and only dates/times with zero
hours and minutes will show correctly. When trying to change the data type to Date/Time it returns an error for all cells containing hours and minutes.
I use a Swedish version of Excel that uses a different time format compared to standard excel and also uses a , as a delimiter between date and time compared to the . used as delimiter in standard excel. Don't know if that can explain
this problem?
Brgds,
C

I updated Power query earlier this week, so it should be the latest version. When I created the sample file now the problem appears, so if it is a bug it has not been solved.
You find the sample file on the link below. 4 sheets with some info on the problem, the data, the query result and one sheet with the data and query result as pictures as it shows in my version of Excel, I guess it will look somewhat different when you open
the file due to local date/time settings.
Appreciate feedback on what you find!
//Caj
https://skydrive.live.com/redir?resid=94DF9214E3A6D4!107&authkey=!AEuAXX_kPC7yKaI&ithint=file%2c.xlsx

How do I report a video not showing correctly?

I tried to find a Contact Us to "Report an issue" but ended up chasing my tail.
This video is not showing correctly in the frameset during preview.
http://itunes.apple.com/us/music-video/medley-surfer-girl-wouldnt/id504074645
at least ... not for when whenever I tried to watch it.

Most every product Mozilla has is from say a mozilla.org site link.
https://mozillalabs.com/en-US/projects/
https://www.mozilla.org/en-US/products/
The only real video related thing Mozilla has is https://wiki.mozilla.org/Shumway and more info at http://mozilla.github.io/shumway/
The site you downloaded this NewVideoPlayerSetup.exe from was a scam as it uses the inexperience of users and popularity of Mozilla and the Firefox browser to trick people into installing stuff like this.
Next time if you are uncertain you should ask as somebody will then tell you if it is legitimate or not for example.

Name of the Month not showing correctly in calendar

I m facing a strange problem with the calendar, on the home screen calendar icon date & day is showing correct but when i view the full month calendar then its not showing the right month --- it is showing all the days of the March 1st to 31st correct but on the TOP in place of month it is showing February 2008 instead of March 2008. How can Feb has 31 days. I hv checked all the other settings.
PLS HELP ME.

Here are a couple of articles from the apple support website that might help out.
http://docs.info.apple.com/article.html?artnum=305740
http://docs.info.apple.com/article.html?artnum=305744

DNG files exported from LR4 not showing changes made when opened in PSE10?

I have LR4, and once I make some develop changes I've been exporting the files I want to use as DNG. I then open them in PSE10 to make final edits. It's been working fine, actually I had an older version of Adobe Raw in my PSE on my other computer. So when I opened in PSE it would ask if I wanted to conver to compatible version to edit in camera raw. I always said no b/c I didn't need to do anymore raw edits. Now that I have installed PSE on my new computer, it has the new ACR version I guess. When I open the DNGs to edit now I no longer get this error message, but it's showing my contrast, etc. as a standard raw setting instead of the changes I made in LR. Some are showing....like vibrance, but "recovery" which I know is "highlights" in LR, and other things are not showing correctly. I know that the options are different, but I don't want to use the ACR settings that it's using when I open the file, or have to go through them again. I'm sure there's something I'm missing but can't figure it out. Thanks for any help!

I quite simply did not comment on the issue of "it is supposed to be better to keep DNG files as opposed to NEF files now, right?"
The issue you raised in your original post, and the issue of choosing DNG versus NEF, are completely separate and independent.
The issue of transferring photos to PSE would cause the exact same problems in your case whether or not you use DNG or NEF.
On the issue of converting photos from NEF to DNG, there are advantages and disadvantages, some people do and some people don't. If you'd like to know more, I suggest you search this forum, there are plenty of discussions on this topic.

Worksetmap not showing correct links when we launch via quick link

Similar Messages

Maybe you are looking for