Workspace in use or Cannot be Created

Is it possible to setup CFBuilder so files opened in Windows explorer open in the currently open instance.  The final release tries to spawn a new instance and displays "Workspace in use or Cannot be Created".  I got around this in Beta's but i can't find a workaround in the final release.

I will also pipe in and state that this is something that I have seen a few times, more
so on Windows 7 than any other version of Windows.
The problem is that there are times when you think you have closed ColdFusion Builder / Eclipse down, that it in fact is still actually running.
So when you go and try to use the same workspace you are presented with the message that it is in use or cannot be created.
The solution is simple, if this is the case with people then it is just a matter of killing that instance of Eclipse that is still running.
Regards,
Andrew Scott
http://www.andyscott.id.au

Similar Messages

  • Workspace in use or cannot be created  error

    I shut down flex builder 3 and it said unable to save workbench state.
    Now when I start it up it always says:
    Workspace in use or cannot be created, choose a different one.
    Any advice what I should do?

    If rebooting does not fix the problem, you will need to find the .lock file in .metadata folder in your workspace and delete it. But that's only if you couldn't find a process locking your workspace.

  • Remote control using DCOM: Error: "ActiveX component cannot be created."

    Hello,
    I want to address a OMICRON CPC100 device via remote control. I have a dll ("TESTCONTROL.dll"), which provides methods to control the CPC100. In order to encapsulate this functionality, I've written a VB.NET-dll ("CLC_CL_for_Net.dll") (it's a class-dll) which calls methods of TESTCONTROL.dll. Now I want to use CLC_CL_for_Net.dll in LabVIEW.
    Here's the code of CLC_CL_for_Net.dll:
    Imports TESTCONTROLLib
    Namespace MyCPCNamespace
        Public Class CPCClass
            Public Sub New()
            End Sub
            Public Sub testfunction(ByVal ipaddress As String)
                Dim tc As TestProcedure
                Dim atm As IATMTest
                tc = CreateObject("TestControl.TestProcedure", ipaddress)   '<-- here the error occurs!
                atm = CreateObject("TestControl.ATMTest", ipaddress)
                atm.Activate(300, 10, 1)
                atm.Deactivate()
            End Sub
        End Class
    End Namespace
    In order to enable DCOM on my computer, I did the following:
    - I switched the firewall off.
    - I started "dcomcnfg.exe", chose "Component Services/Computers/My Computer -> Properties" and checked the checkbox "Enable Distributed COM on this computer".
    - I also chose the tab "My Computer Properties/COM Security" and allowed everyone full access and launch
    permissions.
    - I created an exe-file from my LabVIEW VI, which uses the dll, with the help of the LabVIEW Application Builder.
    For this exe-file and also for the TESTCONTROL, I set the authentication level to "None".
    For test purposes, I used my dll in a C++ project. There everything works fine. However, when I try to use the dll
    in LabVIEW (using LabVIEW's .NET constructor node and method node, which you can find under Connectivity -> .NET), the program fails at the line "tc = CreateObject("TestControl.TestProcedure", ipAddress)".
    Here the error message displayed by LabVIEW (I translated it from German into English):
    "Error 1172 has occurred at Error calling method CLC_CL_for_Net.MyCPCNamespace.CPCClass.testfunction of ObjectId
    handle: 0x2BB117C for obj 0x3F19E1D[CLC_CL_for_Net.MyCPCNamespace.CPCClass] in domain [LabVIEW Domain for Run] and
    thread 3792, (System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation.
     Inner Exception: System.Exception: The ActiveX component cannot be created.
    ) in CPC100_RemoteControlVI.vi"
    As the dll works when I use it in the C++ project, I don't understand why this error occurs when I use the dll in
    LabVIEW. Do I have to give LabVIEW any special permissions?
    Can anyone help me to solve this problem? Thanks a lot for your efforts!
    Regards,
    Matthias

    Hi Matthias,
    I am not really familiar with .NET assemblies but I found couple informations on your error :
    First of all, about the Error 1172 in LabVIEW, there is two things to proof:
    Ensure that the .NET assemblies that you are using are saved in the root directory of the top-level VI.
    Add the .NET assembly as a reference in LabVIEW by selecting Tools»Advanced»NET Assembly References. Click the Add button and navigate to the location of all the assemblies that you want to call.
    Those two steps sometimes solve Error 1172 related problems. I also found some information about the "ActiveX component cannot be created" error. A .Net Class library needs to be in a COM wrapper in order for it to be called through COM methods, such as ActiveX. The way to do so is:
    1. Create a new .NET Class Library project.
    2. Remove the Class1.vb that is created.
    3. Click Add Class on your project.
    4. Choose "COM Class", and add it.
    5. Add at least 1 function or sub in it.
    6. Compile it, and Visual Studio should registrer it automaticly.
    If you whish to manuall reg it, or create a registry entry file, use "RegAsm.exe" in the .NET Framework folder.
    I hope this could be any helpful to you
    Regards
    Florian Abry
    Application Engineer Group Leader
    NI Germany

  • Which privileges are needed to create workspace for using existing schema

    Hi,
    until now I always created new workspaces creating new schemas.
    today I decided to use existing schemas. i created an user (default tablespace "users", with a lot of privileges (create any context, create table, etc..)
    i tried to create a workspace.
    now i got an error: no sufficient privileges for tablespace "users".
    how to solve ?
    Leo

    Leo, you might try altering your site preferences using the apex_admin app so that it doesn't try to install the sample/demo applications during workspace creation. Then repeat the provisioning attempt. If it works, then you'll know the error had something to do with sample/demo app creation in the schema. If it still gives you an error we'll know that too.
    Scott

  • G/L account 59500140 cannot be created as a cost element

    Hi Viewers,
    When I try to do the KO88 Process order settlement i am getting the below error:
    G/L account 59500140 cannot be created as a cost element
    Message no. KQ119
    Diagnosis
    When maintaining the posting rules for passing on results analysis data to Financial Accounting, you entered a G/L account that is defined as a primary cost element in cost and revenue element accounting. This is not allowed. You must enter a G/L account in the posting rules that is not defined as a cost element.
    System Response
    The entry invalid.
    Procedure
    You have the following options:
    Enter a G/L account for which no cost element is specified in Cost and Revenue Element Accounting.
    You can change the message type with user-defined error management (transaction OPR4_KKA). What should be observed when you enter a G/L account in a posting rule that is defined as a primary cost element in Cost and Revenue Element Accounting? You need to define a CO account assignment so that the posting defined in the posting rule can be executed. You do this with transaction OKB9 (default account assignment) or OKC9 (substitution), or using the default account assignment in the cost element master.
    I would like to know the GL Account 59500140  is a P&L Account. Is it correct?.
    Please help me to overcome from this issue.
    Thanks & Regards,
    Aswin

    Execute transaction code FSP0 and check whether the account is a P&L or a Balance Sheet.  Nevertheless, you can only enter accounts that are not created as cost elements in customizing transaction OKG8.  If you enter an account that is also a cost element, then you need to configure default CO account assignment using OKB9 or a substitution using OKC9.  Please refer to the following SAP Notes.
    https://service.sap.com/sap/support/notes/581296

  • I got this iphone from a guy and everytime i tried to update the applications stored in this phone it keeps asking me the password that the guy used to use, even thou i created a new apple ID of my own and updated the account of icloud and everything in t

    I got this iphone from a guy and everytime i tried to update the applications stored in this phone it keeps asking me the password that the guy used to use, even thou i created a new apple ID of my own and updated the account of icloud and everything in this iphone with the new apple ID, it still asks me the password of the account that the guy used to use whenever i tried to update the applications, and i cant find the guy who gave me this iphone...wt should i do???

    Apps are permanently tied to the AppleID that downloaded them and cannot be transferred to another.  Best thing to do is delete the apps and download those you want or need under your AppleID.

  • PROBLEM IN SETTLEMENT CO88 - G/L  7000203 cannot be created as a co element

    Dear friends,
    I am facing with an error. Kindly suggest the way how to come up with the issue.
    My Client due to some reason passed an JV in the month of december in PRD.
    Now after this all the settlement for the next periods are in error. The following is the error while executing CO88.
    G/L account 7000203 cannot be created as a cost element
    Message no. KQ119
    Diagnosis
    When maintaining the posting rules for passing on results analysis data to Financial Accounting, you entered a G/L account that is defined as a primary cost element in cost and revenue element accounting. This is not allowed. You must enter a G/L account in the posting rules that is not defined as a cost element.
    System Response
    The entry invalid.
    Procedure
    You have the following options:
    Enter a G/L account for which no cost element is specified in Cost and Revenue Element Accounting.
    You can change the message type with user-defined error management (transaction OPR4_KKA). What should be observed when you enter a G/L account in a posting rule that is defined as a primary cost element in Cost and Revenue Element Accounting? You need to define a CO account assignment so that the posting defined in the posting rule can be executed. You do this with transaction OKB9 (default account assignment) or OKC9 (substitution), or using the default account assignment in the cost element master.
    I even tried to create make default the COST CENTER in OKB9 for that cost element as stated in the message itself but still the problem exist. I got another suggestion. Firstly i will transfer the values in new GL a/c, and make the necessary config changes in OKG8 with the new GL a/c.
    can somebody guide me whether i am on the right way or is there any work around possible.
    regards,
    sandeep jain

    Hi Sandeep,
    In Transaction OKG8 the GL account for P&L(7000203) should not be a cost element. I dont know how it was allowing you all this while.
    Try assigning another P&L account without a cost element.
    Keep us posted on the progress please.
    Thanks
    Naveen

  • Error while displaying file " C:Temp Filename.Ext cannot be created"

    Dear Friends
    Some users face problem while display the file. They get message " C:\Temp\ Filename.Ext cannot be created ". I checked Details. I got explaination as follows.
    Caution! You are not authorized to work with temporary storage
    Message no. ED204
    Diagnosis
    You do not have authorization to read or write from or to the temporary storage.
    The system uses the temporary storage when you display or change programs using the ABAP Editor.
    The system checks to see whether there is a temporary version of the program.
    If there is, a dialog box appears in which you must choose whether to use the temporary version or the database version.
    The system fills the temporary storage when the editor crashes or you save a temporary version of the program.
    System Response
    You probably do not have the authorization object S_DATASET.
    Procedure
    Ask your system administrator to assign you the relevant authorization.*
    Actually this  problem never occurs frequently. User access the files very frequently creating around 200 Mb to 400 Mb in C:\Temp Folder per day per user. I observerd as per message that User is not have Access right to C drive. Once I get access from IT for that user he is able to display file. But before giving right he is able to display file. But suddenly he is not able to display. I am not getting exact reason why this problem occurs. Some users temp folder size is upto 700 Mb with no acces right to C Drive still he is able to see the image.
    In DC20 I have kept C:\Temp as path for temp folder.
    I have checked the links  also
    Request you to provide me
    What is exact reason of the error?
    Is the solution to problem is giving access rights to the user?
    Do I have to give authorization object S_DATASET to a user?
    With Regards
    Mangesh Pande

    Dear Amaresh
    Thanks for your reply and solution.
    So you mean to say thats this Authorization object  has to be provided to user?
    But my question is how the user was able to see the file even when this Authorization Object was not assigned.
    He was able to display all file. But for particular DIR he is not able to display.
    I have checked this thread
    http://wiki.sdn.sap.com/wiki/display/PLM/Error26172withSAPGUI710+patch13.
    User has SAP GUI 7.10
    File Version 7100.1.0.1027
    Build   0
    Patch Level  0
    Request your help
    With Warm Regards
    Mangesh Pande

  • Field groups cannot be created in the OO context.?

    Hi All,
    The current ABAP command is obsolete while using Field Group in ECC6.0.
    I am getting this error "Field groups cannot be created in the OO context." How to replace Field groups with some other statement.
    Thank you,
    Swapna.M

    Hi Madhavi,
    There is no other solution than rewriting the program, e.q. by creating internal tables for the fields now defined with FIELD-GROUPS in  HEADER and ITEMS and looping over these tables.
    Regards,
    John.

  • The target file cannot be created

    I'm trying to output an Adobe Bridge Lightroom Flash gallery.
    I keep getting the following error message ad nauseum.
    The target file cannot be created.
    There are two possible reasons:
    1. Disk space is innsufficient.
    2. The target file path is too long.
    I've never had this happen before.
    I've worked on this file for two weeks, and NEED IT OUTPUTED. It's for a major newspaper regarding HDR photos of Japan's 3.11.11 disaster.
    I cleared out the cache. So it can't be anything like that.
    It's the latest version of Bridge.
    I'm on a new iMac with 2g storage, and 16g memory. Mac Lion. Blah, blah, blah.
    Is there a lame built in limitation on how many photos can be used? I'm using 300 photos. I've had no issues outputting 200 before.
    Setting for view sizes are 800, 800, 75, 100.
    Look, if you DON'T know specifically, don't chime in. I've tried some poor advice which has resulted in having to reorder 300 files, which wasnt fun.
    This is a seriously and timely issue, as the deadline approaches, and I need to get this pathetic problem resolved.
    PS, Adobe Bridge SUCKS!

    I've had the exact same issue here as well. Phone support is does not work with this product and I've been in Chat "Hold" for 3 hours now.  I've replaced the output module, checked and verified all permissions, cleared all preferences, with no avail.
    I have not had any issue with uploading galleries for the past year, and now, all of a sudden, issues. 
    iMac 27", Yosemite, 16GB Mem, 800 GB space, no permissions issues as I've also tried to just save the gallery to my desktop and upload via ftp client, but Bridge says location does not exist, which, ha, it does, because its on the hard drive....

  • DFS - The replication group cannot be created - insufficient permissions - NOT DOMAIN ADMIN, LOCAL ADMIN

    Hi,
    I am trying to setup DFS replication on tow servers. I am local admin on the servers but NOT domain account. Is it possible to create Replication group anyway? or should i contact the Domain administrator to the job?
    Thanks

    Hi,
    We cannot use local administrator to create a dfs replication group. By default, Domain Admins group can create a dfs replication group. You could also delegate to a user or group the ability to create replication groups and the user must add to the local Administrators
    group on the namespace server.
    For more detailed information, please refer to the article below:
    Delegate the Ability to Manage DFS Replication
    http://msdn.microsoft.com/en-us/library/cc771465.aspx
    Best Regards,
    Mandy 
    If you have any feedback on our support, please click
    here .
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Alarm not working. cannot set/create new

    I have an iphone 5c running 8.0.2
    I was having issues with sending text messages so I looked up similar problems and ended up having to reset network settings. this resolved the issue with the text messages but now I cannot set/create new alarms and all of my previous alarms were deleted. seems odd that the two are somehow connected but that is all I can think of that I have done since this morning (where it worked just fine).
    this is very frustrating, any help is appreciated. 

    I am having the same problem with my Iphone 4s running 8.0.2
    I noticed yesterday that all of my set alarms were deleted. When I go to add a new alarm, nothing appears after I press 'save'. The small alarm icon appears in the top right for a moment, but disappears after a split second.
    There is no error message.
    I've used the same alarms for years without any problems.

  • Conditions cannot be created in distribution channel

    hi all
    while uploading condition record through VK11, i am getting this error "Conditions cannot be created in distribution channel 12"
    where is the setting where i can restrict uploading records at distribution level..??

    I get the error before entering the material. The message is
    Conditions cannot be created in distribution channel 12
    Diagnosis                                                                               
    You have attempted to create condition records for distribution channel
        12. This function is not allowed, because in sales organization 1000,  
        distribution channel 12 is not assigned to a distribution channel which
        is used in a sales document.                                                                               
    System Response                                                                               
    It is not allowed to enter conditions in distribution channel 12 (sales
        organization 1000).                                                                               
    Procedure                                                                               
    Check whether you have selected the correct distribution channel and whether the distribution channels are assigned correctly in Customizing.In addition, it is possible that, in Customizing, another distribution channel has been assigned to this distribution channel as a reference  
    for the conditions.

  • GRPO cannot be created without PO

    How to do the settings in SAP BO which should not allow GRPO to be created without creation of PO

    HI
    this can be done only through SP
    create this SP
    USE DB
    GO
    /****** Object:  StoredProcedure [dbo].[EMR_BaseRef_GRPO]    Script Date: 11/25/2011 15:19:10 ******/
    SET ANSI_NULLS ON
    GO
    SET QUOTED_IDENTIFIER ON
    GO
    ALTER Procedure [dbo].[EMR_BaseRef_GRPO]
    (@object int,@Docentry int, @EMRerror int OUTPUT)
    As
    Begin
    select @EMRerror = 0
    IF (@object = '20')
    BEGIN
    IF (SELECT max(ISNULL(T0.BaseEntry,-1))  FROM PDN1 T0 WHERE T0.DocEntry = @Docentry) != -1
    BEGIN
      set @EMRerror = 0
    END
    ELSE
    BEGIN
        --set @error_message='Goods Receipt PO cannot be created directly. Copy from PO'
        set @EMRerror=1  
    END
    END
    END
    then create following in SP transaction notification of ur DB
    IF (@object_type in ('20'))
    BEGIN
    if (@transaction_type in ('A','U'))
    BEGIN
    EXEc EMR_BaseRef_GRPO @object_type, @list_of_cols_val_tab_del,@EMRerror =@error OUTPUT
      IF (@error = 1)
      BEGIN
      SET @error =1
      SET @error_message = 'Goods Receipt PO cannot be created directly. Copy from PO'
      END
    END

  • CipherInputStream object cannot be created

    following code didi'nt work,what to do,
    i need to use this constructor itself(cannot use public)
    import java.io.*;
    import javax.crypto.*;
    class New
    public static void main(String args[]) {
    FileInputStream fis = new FileInputStream("news.htm");
    CipherInputStream cis = new CipherInputStream(fis);
    }

    Ths single argument constructor is protected so to use it you must create a class derived from CipherInputStrem. The java doc is
    CipherInputStream
    protected CipherInputStream(InputStream is)
    Constructs a CipherInputStream from an InputStream without specifying a Cipher. This has the effect of constructing a CipherInputStream using a NullCipher.
    Note: if the specified input stream is null, a NullPointerException may be thrown later when it is used.
    The question I ask is - why do you want to create a CipherInputStream without specifying a Cipher?

Maybe you are looking for