Workspace not finding in weblogic

Hi All,
I have used the following files for the configuration. Everything went well. But i couldnt find workspace from the weblogic console niether url http://<servername>:19000/workspace/ is not comming up. Any ithoughts..??
Download Oracle Hyperion Enterprise Performance Management System Installer, Fusion Edition Release 11.1.2.1.0 for Microsoft Windows (32-bit) V25454-01 216M
Download Oracle Hyperion Foundation Services Release 11.1.2.1.0 for Microsoft Windows (32-bit) Part 1 of 7 V25455-01 852M
Download Oracle Hyperion Foundation Services Release 11.1.2.1.0 for Microsoft Windows (32-bit) Part 2 of 7 V25456-01 1.3G
Download Oracle Hyperion Foundation Services Release 11.1.2.1.0 for Microsoft Windows (32-bit) Part 3 of 7 V25457-01 1.2G
Download Oracle Hyperion Foundation Services Release 11.1.2.1.0 for Microsoft Windows (32-bit) Part 4 of 7 V25458-01 1.4G
Download Oracle Hyperion Foundation Services Release 11.1.2.1.0 Part 5 of 7 V25459-01 1.7G
Download Oracle Hyperion Foundation Services Release 11.1.2.1.0 Part 6 of 7 V25460-01 48M
Download Oracle Hyperion Foundation Services Release 11.1.2.1.0 Part 7 of 7 V25461-01 1.0G
Download Oracle Hyperion Calculation Manager Release 11.1.2.1.0 V25462-01 5.3M
Download Oracle Hyperion Enterprise Performance Management Architect, Fusion Edition Release 11.1.2.1.0 V25463-01 27M
Download Oracle Essbase Release 11.1.2.1.0 Part 1 of 2 V25464-01 371M
Download Oracle Essbase Release 11.1.2.1.0 Part 2 of 2 for Microsoft Windows (32-bit) V25465-01 45M
Download Oracle Essbase Clients Release 11.1.2.1.0 V25466-01 140M
Download Oracle Essbase Spreadsheet Add-in Release 11.1.2.1.0 for Microsoft Windows V25467-01 200M
Download Oracle Hyperion Financial Reporting, Fusion Edition Release 11.1.2.1.0 V25468-01 92M
Download Oracle Hyperion Enterprise Performance Management Reporting and Analysis Core Components Release 11.1.2.1.0 V25470-01 136M
Download Hyperion Web Analysis Release 11.1.2.1.0 V25475-01 12M
Download Oracle Hyperion Financial Management, Fusion Edition Release 11.1.2.1.0 V25476-01 190M
Download Oracle Hyperion Planning, Fusion Edition Release 11.1.2.1.0 V25477-01 116M
Download Oracle Hyperion Performance Scorecard, Fusion Edition Release 11.1.2.1.0 V25488-01 73M
Download Oracle Hyperion Enterprise Performance Management System Additional Content Release 11.1.2.1.0 V25494-01 1.4G

If you can access shared services on port 28080 then the foundation weblogic piece is probably working.
You should configure the foundation web server last, just run the configurator again and run the configure web server to deploy the oracle http server configuration again.
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

Can not find proper weblogic server install url.

I want to learn oracle form. So I was download oracle 11g fusion middleware. Before install it I have to install oracle web logic server. I was download weblogic server [ http://download.oracle.com/auth/otn/nt/middleware/11g/wls/wls1034_dev.zip] but it can not work. It has no .exe file to install. So help me to know from where can I download oracle weblogic server.

neelgpatel wrote:
I want to learn oracle form. So I was download oracle 11g fusion middleware. Before install it I have to install oracle web logic server. I was download weblogic server [ http://download.oracle.com/auth/otn/nt/middleware/11g/wls/wls1034_dev.zip] but it can not work. It has no .exe file to install. So help me to know from where can I download oracle weblogic server.
The WebLogic Server installation you have referred to in this link is the "developer" distribution which is a simple zip file distribution that has no installer. Putting "FMW" on top of this is not supported. This is documented in the readme on the download site: http://download.oracle.com/otn/nt/middleware/11g/wls/README.txt
If you want to learn Oracle Forms, then you need to use a full installer of WebLogic Server.
Try this page here: http://www.oracle.com/technetwork/middleware/weblogic/downloads/wls-main-097127.html and select the "Oracle WebLogic Server 11gR1 (10.3.4) + Coherence - Package Installer" for your specific platform:
http://download.oracle.com/otn/nt/middleware/11g/wls/wls1034_win32.exe
http://download.oracle.com/otn/linux/middleware/11g/wls/wls1034_linux32.bin
http://download.oracle.com/otn/solaris/middleware/11g/wls/wls1034_solaris32.bin
or the generic installer if you are not on one of those platforms:
http://download.oracle.com/otn/nt/middleware/11g/wls/wls1034_generic.jar
** I don't know if WLS 10.3.4 is the correct version to go with the Forms/Reports installer, please check those details for yourself. But the process will be the same if WLS 10.3.3 is required per the certification.
-steve-

Running an exe from within Oracle WebLogic 10g R3 does not find dll

Hi,
I am facing a strange issue with Oracle WebLogic 10g R3.
I use the code as shown in Listing 1 below to run a windows based application exe (batch job) from within my web application hosted on Oracle WebLogic 10g Release 3.
Note that this code woks fine on Tomcat 6.x and OC4J (JDeveloper TP4).
The exec gets executed but the log of the exe program shows it could not load certain DLLs.
Note that these DLLs are in the same directoy as the Batch program and this directory is in the PATH.
Running through simple Java Program Successful*
When I run the same program from a java program it runs successfully. So this means some WebLogic environment does not get set properly.
Running directly BatchProg.exe rather than cmd.exe fails*
Also note that when I run the exe directly e.g. BatchProg.exe rather than through cmd.exe it gives me a error the system did not find the file specified.
CreateProcess error=2, The system cannot find the file specified with cause java.io.IOException: CreateProcess error=2, The system cannot find the file specified
Listing 1:*
String[] commandArgs = new String[|http://forums.oracle.com/forums/] { "cmd.exe", "/C", "BatchProg.exe \"param1\" \"param2\" " },null , l_workingDir)
Runtime rt = Runtime.getRuntime();
Process proc;
proc = rt.exec( commandArgs, envParams, workingDir );
ProcessIO errStream = new ProcessIO( proc.getErrorStream(), "ERROR");
ProcessIO outStream = new ProcessIO( proc.getInputStream(), "OUTPUT");
errStream.start(); // process any errors from the command
outStream.start(); // process any output from the command
System.out.println("Error=" +errStream);
System.out.println("Out" + outStream);
return (p_waitToFinish ? proc.waitFor() : this.SUCCESS);

OK.
I have posted this on the WebLogic Forum.
Thanx.

Could not find or load main class weblogic.WLST

Hi,
I am trying to run a python script to create JMS components for use with iHub and i got the following error message when i try to run the script:
C:\ihub\bin>java weblogic.WLST omipmihubwlscript.py weblogicjms Welcome1 http://<servername>:7111 OMIPMIHUBServer
Error: Could not find or load main class weblogic.WLST
I have run the setWLSEnv.cmd file and got the following output
C:\oracle\Middleware2\wlserver_10.3\server\bin>setWLSEnv.cmd
CLASSPATH="C:\oracle\MIDDLE~2\patch_wls1036\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\oracle\MIDDLE~2\patch_ocp371\profiles\default\sys_manifest_classpath\weblogic_p
atch.jar;C:\PROGRA~1\Java\JDK17~1.0_1\lib\tools.jar;C:\oracle\MIDDLE~2\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\oracle\MIDDLE~2\WLSERV~1.3\server\lib\weblogic.jar;C:\oracle\MIDDLE~2\mod
ules\features\weblogic.server.modules_10.3.6.0.jar;C:\oracle\MIDDLE~2\WLSERV~1.3\server\lib\webservices.jar;C:\oracle\MIDDLE~2\modules\ORGAPA~1.1/lib/ant-all.jar;C:\oracle\MIDDLE~2\modu
les\NETSFA~1.0_1/lib/ant-contrib.jar;C:\oracle\MIDDLE~2\patch_wls1036\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\oracle\MIDDLE~2\patch_ocp371\profiles\default\sys_man
ifest_classpath\weblogic_patch.jar;C:\PROGRA~1\Java\JDK17~1.0_1\lib\tools.jar;C:\oracle\MIDDLE~2\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\oracle\MIDDLE~2\WLSERV~1.3\server\lib\weblogic.
jar;C:\oracle\MIDDLE~2\modules\features\weblogic.server.modules_10.3.6.0.jar;C:\oracle\MIDDLE~2\WLSERV~1.3\server\lib\webservices.jar;C:\oracle\MIDDLE~2\modules\ORGAPA~1.1/lib/ant-all.j
ar;C:\oracle\MIDDLE~2\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\oracle\MIDDLE~2\patch_wls1036\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\oracle\MIDDLE~2\patch_ocp37
1\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\PROGRA~1\Java\JDK17~1.0_1\lib\tools.jar;C:\oracle\MIDDLE~2\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\oracle\MIDDLE~2\WLSER
V~1.3\server\lib\weblogic.jar;C:\oracle\MIDDLE~2\modules\features\weblogic.server.modules_10.3.6.0.jar;C:\oracle\MIDDLE~2\WLSERV~1.3\server\lib\webservices.jar;C:\oracle\MIDDLE~2\module
s\ORGAPA~1.1/lib/ant-all.jar;C:\oracle\MIDDLE~2\modules\NETSFA~1.0_1/lib/ant-contrib.jar;"
PATH="C:\oracle\MIDDLE~2\patch_wls1036\profiles\default\native;C:\oracle\MIDDLE~2\patch_ocp371\profiles\default\native;C:\oracle\MIDDLE~2\WLSERV~1.3\server\native\win\x64;C:\oracle\MIDD
LE~2\WLSERV~1.3\server\bin;C:\oracle\MIDDLE~2\modules\ORGAPA~1.1\bin;C:\PROGRA~1\Java\JDK17~1.0_1\jre\bin;C:\PROGRA~1\Java\JDK17~1.0_1\bin;C:\oracle\MIDDLE~2\patch_wls1036\profiles\defa
ult\native;C:\oracle\MIDDLE~2\patch_ocp371\profiles\default\native;C:\oracle\MIDDLE~2\WLSERV~1.3\server\native\win\x64;C:\oracle\MIDDLE~2\WLSERV~1.3\server\bin;C:\oracle\MIDDLE~2\module
s\ORGAPA~1.1\bin;C:\PROGRA~1\Java\JDK17~1.0_1\jre\bin;C:\PROGRA~1\Java\JDK17~1.0_1\bin;C:\oracle\MIDDLE~2\patch_wls1036\profiles\default\native;C:\oracle\MIDDLE~2\patch_ocp371\profiles\
default\native;C:\oracle\MIDDLE~2\WLSERV~1.3\server\native\win\x64;C:\oracle\MIDDLE~2\WLSERV~1.3\server\bin;C:\oracle\MIDDLE~2\modules\ORGAPA~1.1\bin;C:\PROGRA~1\Java\JDK17~1.0_1\jre\bi
n;C:\PROGRA~1\Java\JDK17~1.0_1\bin;C:\app\paul.currie\product\11.2.0\client_2\bin;C:\app\paul.currie\product\11.2.0\dbhome_3\bin;C:\Program Files (x86)\PC Connectivity Solution\;C:\Wind
ows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Java\jdk1.7.0_13\jre\bin;;C:\oracle\MIDDLE~2\WLSERV~1.3\server\native\win\x
64\oci920_8;C:\oracle\MIDDLE~2\WLSERV~1.3\server\native\win\x64\oci920_8;C:\oracle\MIDDLE~2\WLSERV~1.3\server\native\win\x64\oci920_8"
Your environment has been set.
I am totally stuck at this point so any help would be much appreciated.
Cheers
Paul

I have just tested both on a Windows and a Linux server and it works fine.
D:\oracle\product\Middleware\wlserver_10.3\server\bin>setWLSEnv.cmd
CLASSPATH=D:\oracle\product\MIDDLE~1\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\oracle\
product\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\oracle\product\JAVA_C~1\li
b\tools.jar;D:\oracle\product\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;D:\oracle\product\MIDDLE~1\WLSERV~1.3\serve
r\lib\weblogic.jar;D:\oracle\product\MIDDLE~1\modules\features\weblogic.server.modules_10.3.5.0.jar;D:\oracle\product\MI
DDLE~1\WLSERV~1.3\server\lib\webservices.jar;D:\oracle\product\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;D:\oracle\pro
duct\MIDDLE~1\modules\NETSFA~2.0_1/lib/ant-contrib.jar;D:\oracle\product\MIDDLE~1\patch_wls1035\profiles\default\sys_man
ifest_classpath\weblogic_patch.jar;D:\oracle\product\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\web
logic_patch.jar;D:\oracle\product\JAVA_C~1\lib\tools.jar;D:\oracle\product\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.ja
r;D:\oracle\product\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;D:\oracle\product\MIDDLE~1\modules\features\weblogic.ser
ver.modules_10.3.5.0.jar;D:\oracle\product\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;D:\oracle\product\MIDDLE~1\mod
ules\ORGAPA~1.1/lib/ant-all.jar;D:\oracle\product\MIDDLE~1\modules\NETSFA~2.0_1/lib/ant-contrib.jar;
PATH=D:\oracle\product\MIDDLE~1\patch_wls1035\profiles\default\native;D:\oracle\product\MIDDLE~1\patch_jdev1111\profiles
\default\native;D:\oracle\product\MIDDLE~1\WLSERV~1.3\server\native\win\x64;D:\oracle\product\MIDDLE~1\WLSERV~1.3\server
\bin;D:\oracle\product\MIDDLE~1\modules\ORGAPA~1.1\bin;D:\oracle\product\JAVA_C~1\jre\bin;D:\oracle\product\JAVA_C~1\bin
;D:\oracle\product\MIDDLE~1\patch_wls1035\profiles\default\native;D:\oracle\product\MIDDLE~1\patch_jdev1111\profiles\def
ault\native;D:\oracle\product\MIDDLE~1\WLSERV~1.3\server\native\win\x64;D:\oracle\product\MIDDLE~1\WLSERV~1.3\server\bin
;D:\oracle\product\MIDDLE~1\modules\ORGAPA~1.1\bin;D:\oracle\product\JAVA_C~1\jre\bin;D:\oracle\product\JAVA_C~1\bin;C:\
Program Files\Legato\nsr\bin;C:\PROGRA~2\CA\SHARED~1\ETPKI\lib;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C
:\Windows\System32\WindowsPowerShell\v1.0\;D:\oracle\Java\current\jre\bin;C:\PROGRA~2\CA\IDENTI~1\PROVIS~1\BIN;C:\Progra
m Files (x86)\CA\SharedComponents\CAM\bin;D:\oracle\product\MIDDLE~1\WLSERV~1.3\server\native\win\x64\oci920_8;D:\oracle
\product\MIDDLE~1\WLSERV~1.3\server\native\win\x64\oci920_8
Your environment has been set.
D:\oracle\product\Middleware\wlserver_10.3\server\bin>java weblogic.WLST
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
wls:/offline>

Can not start WebLogic in Eclipse. Error: "Could not find the main class."

I have installed Eclipse 2.0 and WebLogic Server 6.1. and the WebLogc plug in from GENUITEC (and jdk1.3.1_04, on Win2K Server). After I have done the configuration, the WebLogic start/stop buttons are integried into the Eclipse Toolbar, but when I click on the start button to start Weblogic, it pops up a dialog box "Java Virtual Machine Launcher" with message: "Could not find the main class. Program will exit!"
Starting WebLogc Server from the Start panel works fine.
Does any one have seen this before or have a suggestion what I should do?
Many many thanks in advance.
Huan

Weblogic must be started with a full JDK; otherwise
JSPs and dynamic EJB stubs could not be deployed. The
error message
indicates you are attempting to use a JRE. Configure
Eclipse JRE to point to a JDK. The product
documentation will help you with this process. It does not work for me. :-(
I have tried JDK 1.3.1 and 1.4.1: same result: I get a "Could not find the main class: Program will exit"
For free expert support please consider contacting
Genuitec at [email protected] If just want any
answer ask a newsgroup.
WayneI'll try the support at '[email protected]' :)
Michel
Michel Szybist
[email protected]
Fax: +33 (0)173729897
SMS: http://www.szybist.net/

Could not find a Hyperion Reporting and Analysis in workspace

i installed hyperion 9 system them with reporting and essbase ..
after configured all .. configure shows sucess but after shared services configuration failed in BI
unable to open workspace
when i tried to open Workspace
"Could not find a Hyperion Reporting and Analysis in workspace9 server running on server at port 6800. Please verify your server connect string and confirm that the server is up."
Edited by: user1624634 on Mar 10, 2010 12:28 AM

Hello
May i suggest adressing this question to a Hyperion/Essbase forum:, here is the link i am certain you'll get your answer quicker.
Essbase
Thanks

ORA-12516, TNS:listener could not find available handler Weblogic error

Hello,
I have a wierd issue while setting up a datasource in weblogic.
The database am trying to connect to is an Oracle DB and am using a LDAP based URL as the datasource URL in weblogic.
Service name : PSG03900_PEWTER_APPL.WORLD
The LDAP url given was jdbc:oracle:thin:@ldap://oid_ldap_server_ln.csfp.co.uk:1522/PSG03900_PEWTER_APPL.WORLD,cn=OracleContext,dc=uk,dc=csfb,dc=com
driver oracle.jdbc.xa.client.OracleXADataSource
When am trying to setup the datasource and test the connection configuration the test is successful. However when I try to activate the changes I get the following error:
An error occurred during activation of changes, please see the log for details.
weblogic.application.ModuleException:
Listener refused the connection with the following error: ORA-12516, TNS:listener could not find available handler with matching protocol stack The Connection descriptor used by the client was: (DESCRIPTION = (SDU = 8192) (TDU = 8192) (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = PSGLOD2008-SCAN.AP.HEDANI.NET)(PORT = 1522)) (LOAD_BALANCE = ON) (FAILOVER = ON ) ) (CONNECT_DATA = (SERVICE_NAME = PSG03900_PEWTER_APPL.WORLD) (FAILOVER_MODE = (TYPE = SESSION) (METHOD = BASIC) (RETRIES = 20) (DELAY = 5))))
The DBAs have confirmed to me that the database setup on their side is correct as they are able to do a tnsping and sqlplus connectivity succeeds.
I have also tried accessing the database through PL/SQL developer and am able to login however the weblogic activation fails for some wierd reason.
Could I request someone to enlighten me what I am missing here? I have been at it for days now.
Many thanks.
Best Regards,
Vinod
Edited by: 984452 on Jan 27, 2013 11:16 PM

Hi Kishore,
Thank you for the response.
The number of processes has been set to 500 and number of sessions set to 792 and currently the utilization has just reached 15% of the limit set.
We are using Weblogic 9.2 and trying to connect to Oracle 11g database, could the Oracle thin client being used in Weblogic have any issues connecting?
Many thanks.
Vinod

Can not find weblogic_sp.jar file after installed weblogic

I just installed weblogic server (using weblogic610sp2_win.exe file) on my windows
2000 pro box. Everything looks fine but I can not find the < weblogic_sp.jar >
file. I noticed some guys met same problem but no answer.
can you help me ?

Hi.
Don't worry about it.
The reference to weblogic_sp.jar is a leftover from previous methods for updating
service packs. Nowadays when you install a service pack it is integrated into the
weblogic.jar file. If you have any doubts about your server version after installing
or applying a service pack you should check the server version via the console
(Servers|<server name>|Monitoring|Versions). Your version string should look
something like: "WebLogic Server 6.1 SP2 12/18/2001 11:13:46 #154529"
Regards,
Michael
Leo wrote:
I just installed weblogic server (using weblogic610sp2_win.exe file) on my windows
2000 pro box. Everything looks fine but I can not find the < weblogic_sp.jar >
file. I noticed some guys met same problem but no answer.
can you help me ?--
Michael Young
Developer Relations Engineer
BEA Support

Weblogic can not find mssql jar

Jdeveloper, latest version can have access to my remote MSSQL database. When I try to Run the application after making a model, IntegratedWebLogic can not find the mssql jar. Any idea how can i fix this.
Thanks in advance

Dear Shay, thanks a lot for your prompt respons. Be honest to you I 'm new to jdeveloper and what I did was:
I have downloaded the sqljdbc4.jar and placed it under the Oracle/Middelware/jdeveloper/jdev/lib directory.
where/how can i deploy it by default?
my embeded WebLogic is installed also under the Oracle/Middelware directory, I have the following sub directory:
Oracle/Middelware/wlserver_10.3/bugsfixed
Oracle/Middelware/wlserver_10.3/common
Oracle/Middelware/wlserver_10.3/inventory
Oracle/Middelware/wlserver_10.3/server
Oracle/Middelware/wlserver_10.3/sip
and under all of these directorie I have lib directory, where do I have to copy the mssql jar?
Mant thanks for your support..

Weblogic not finding javax.naming classes when instantiating bean

Hello,
          I am developing a JSP which contains a JavaBean.
          This bean is a wrapper for a session EJB, the getProperty() methods in
          the bean call methods on the EJB's remote interface.
          I have tested this bean as a stand alone application by adding a
          main(String[] args) method to it and it works.
          However, when adding the bean to the JSP, the JSP does not show in the
          browser, I get a n internal server error 500 instead.
          It seems that Weblogic is not finding the javax.naming.NamingException
          class when instantiating the bean.
          When looking at the weblogic log, I see the following stack trace:
          Fri Aug 18 15:12:06 EDT 2000:<E> <ServletContext-General> Servlet failed
          with Exception
          java.lang.NoClassDefFoundError: javax/naming/NamingException
          at java.lang.ClassLoader.resolveClass0(Native Method)
          at java.lang.ClassLoader.resolveClass(ClassLoader.java:579)
          at
          weblogic.utils.classloaders.GenericClassLoader.reallyLoadClass(GenericClassLoader.java,
          Compiled Code)
          at
          weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java,
          Compiled Code)
          at
          weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java,
          Compiled Code)
          at java.beans.Beans.instantiate(Beans.java:194)
          at java.beans.Beans.instantiate(Beans.java:55)
          at weblogic.servlet.jsp.JspLexer.processBeanTag(JspLexer.java:1138)
          at weblogic.servlet.jsp.JspLexer.mXML_OPEN_USEBEAN(JspLexer.java,
          Compiled Code)
          at weblogic.servlet.jsp.JspLexer.mXML_THING(JspLexer.java:1554)
          at weblogic.servlet.jsp.JspLexer.mTOKEN(JspLexer.java, Compiled Code)
          at weblogic.servlet.jsp.JspLexer.nextToken(JspLexer.java, Compiled
          Code)
          at weblogic.servlet.jsp.JspLexer.parse(JspLexer.java, Compiled Code)
          at weblogic.servlet.jsp.JspParser.doit(JspParser.java, Compiled Code)
          at weblogic.servlet.jsp.JspParser.parse(JspParser.java:116)
          at weblogic.servlet.jsp.Jsp2Java.outputs(Jsp2Java.java:97)
          at weblogic.utils.compiler.CodeGenerator.generate(CodeGenerator.java,
          Compiled Code)
          at weblogic.servlet.jsp.JspStub.compilePage(JspStub.java, Compiled
          Code)
          at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:173)
          at weblogic.servlet.jsp.JspStub.checkForReload(JspStub.java:92)
          at
          weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.java:191)
          at
          weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:118)
          at
          weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:744)
          at
          weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:692)
          at
          weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContextManager.java:251)
          at
          weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java:363)
          at
          weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:263)
          at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
          Any idea on how to fix this?
          Thanks for any help,
          David


          yes, weblogicaux.jar is definitely in the weblogic.class.path. i've even tried starting the server from the command line, declaring the classes there. my "trade.xml" document has the URI set as "http://localhost:7001/BizTalkServer". when i enter this on the "BizClient.jsp" form, i get the error discussed below. however, if i enter "http://localhost:7001", even though this is not the explicit location of the BizTalk server, the server returns:
          Thank you! Your trade has been recieved. A BizTalk document has been sent to http://localhost:7001/ with the following information: etc...............
          So there appears to be something wrong with the "/BizTalkServer" setup on my machine. Any ideas?
          Kumar Allamraju <[email protected]> wrote:
          >Make sure weblogicaux.jar is in your weblogic.class.path
          >
          >i.e -Dweblogic.class.path=$WL_HOME/lib/weblogicaux.jar:$WL_HOME/classes etc etc...
          >
          >--
          >Kumar
          >
          >Mike Bachers wrote:
          >
          >> I'm currently struggling with a similar problem, although as a newcomer to WL I'm having some trouble figuring it out. I'm trying to run the BizTalk server example (http://www.weblogic.com/docs51/examples/xml/biztalk/index.html) under Windows 2000 and JDK1.2.2. I'm able to proceed without problems until I submit the form on the "BizClient.jsp" page. At this point, I receive this error:
          >> ------------------------------------------------
          >> There was a problem connecting to the BizTalk server. Exception caught: java.io.FileNotFoundException: Response: '500' for url: 'http://localhost:7001/BizTalkServer'
          >> ------------------------------------------------
          >>
          >> At the same time, the WL console spits this out:
          >> ------------------------------------------------
          >> java.lang.NoClassDefFoundError: javax/naming/NamingException
          >> ....
          >> ------------------------------------------------
          >>
          >> I know this class is in the weblogicaux.jar, and it's included in my classpath. I think David's fix (see below) is getting at my problem, too, but I'm not sure. Anyone relate?
          >>
          >> "David R. Heffelfinger" <[email protected]> wrote:
          >> >Figured it out. The problem was that the beans were in a directory
          >> >in the JAVA_CLASSPATH in weblogic.properties. Moved the directory to
          >> >WEBLOGIC_CLASSPATH and the problem went away.
          >> >
          >> >David
          >> >
          >> >"David R. Heffelfinger" wrote:
          >> >
          >> >> Hello,
          >> >>
          >> >> I am developing a JSP which contains a JavaBean.
          >> >> This bean is a wrapper for a session EJB, the getProperty() methods in
          >> >> the bean call methods on the EJB's remote interface.
          >> >>
          >> >> I have tested this bean as a stand alone application by adding a
          >> >> main(String[] args) method to it and it works.
          >> >>
          >> >> However, when adding the bean to the JSP, the JSP does not show in the
          >> >> browser, I get a n internal server error 500 instead.
          >> >> It seems that Weblogic is not finding the javax.naming.NamingException
          >> >> class when instantiating the bean.
          >> >>
          >> >> When looking at the weblogic log, I see the following stack trace:
          >> >>
          >> >> Fri Aug 18 15:12:06 EDT 2000:<E> <ServletContext-General> Servlet failed
          >> >> with Exception
          >> >>
          >> >> java.lang.NoClassDefFoundError: javax/naming/NamingException
          >> >>
          >> >> at java.lang.ClassLoader.resolveClass0(Native Method)
          >> >>
          >> >> at java.lang.ClassLoader.resolveClass(ClassLoader.java:579)
          >> >>
          >> >> at
          >> >> weblogic.utils.classloaders.GenericClassLoader.reallyLoadClass(GenericClassLoader.java,
          >> >> Compiled Code)
          >> >>
          >> >> at
          >> >> weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java,
          >> >> Compiled Code)
          >> >>
          >> >> at
          >> >> weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java,
          >> >> Compiled Code)
          >> >>
          >> >> at java.beans.Beans.instantiate(Beans.java:194)
          >> >>
          >> >> at java.beans.Beans.instantiate(Beans.java:55)
          >> >>
          >> >> at weblogic.servlet.jsp.JspLexer.processBeanTag(JspLexer.java:1138)
          >> >>
          >> >> at weblogic.servlet.jsp.JspLexer.mXML_OPEN_USEBEAN(JspLexer.java,
          >> >> Compiled Code)
          >> >>
          >> >> at weblogic.servlet.jsp.JspLexer.mXML_THING(JspLexer.java:1554)
          >> >>
          >> >> at weblogic.servlet.jsp.JspLexer.mTOKEN(JspLexer.java, Compiled Code)
          >> >>
          >> >> at weblogic.servlet.jsp.JspLexer.nextToken(JspLexer.java, Compiled
          >> >> Code)
          >> >>
          >> >> at weblogic.servlet.jsp.JspLexer.parse(JspLexer.java, Compiled Code)
          >> >>
          >> >> at weblogic.servlet.jsp.JspParser.doit(JspParser.java, Compiled Code)
          >> >>
          >> >> at weblogic.servlet.jsp.JspParser.parse(JspParser.java:116)
          >> >>
          >> >> at weblogic.servlet.jsp.Jsp2Java.outputs(Jsp2Java.java:97)
          >> >>
          >> >> at weblogic.utils.compiler.CodeGenerator.generate(CodeGenerator.java,
          >> >> Compiled Code)
          >> >>
          >> >> at weblogic.servlet.jsp.JspStub.compilePage(JspStub.java, Compiled
          >> >> Code)
          >> >>
          >> >> at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:173)
          >> >>
          >> >> at weblogic.servlet.jsp.JspStub.checkForReload(JspStub.java:92)
          >> >>
          >> >> at
          >> >> weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.java:191)
          >> >>
          >> >> at
          >> >> weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:118)
          >> >>
          >> >> at
          >> >> weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:744)
          >> >>
          >> >> at
          >> >> weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:692)
          >> >>
          >> >> at
          >> >> weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContextManager.java:251)
          >> >>
          >> >> at
          >> >> weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java:363)
          >> >>
          >> >> at
          >> >> weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:263)
          >> >>
          >> >> at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
          >> >>
          >> >> Any idea on how to fix this?
          >> >>
          >> >> Thanks for any help,
          >> >> David
          >> >
          >

Could not find Patch CR112484_81sp1.jar for WEBLOGIC 8.1

Due problem with ACTUATE Server 7 WE have to install this patch but we could not
find it ?
Where is it on WL8.1 reference site ?
Thanks

Hello,
As these patch is not publically avialble through BEA Advisories....so you need to open a support case to get this patch. Or otherwise you can upgrade to WLS 8.1 sp2 ,as this issue is fixed in this service pack.
Regards,
Kuldeep.

MapBuilder Error:Can not find a GeoRaster object with specified rdt and rid

Hello,
I can't GeoRaster data in the preview of the MapBuilder and MapViewer. The GeoRasterViewer shows the Raster images without problems.
MapBuilders error message:
19.11.2008 13:07:11 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
SCHWERWIEGEND: GeoRaster load Exception:
oracle.spatial.georaster.GeoRasterException: Can not find a GeoRaster object with specified rdt and rid.
     at oracle.spatial.georaster.JGeoRaster.validateConn(JGeoRaster.java:608)
     at oracle.sdovis.theme.GeoRasterThemeProducer$JGeoRasterGTP.<init>(GeoRasterThemeProducer.java:2037)
     at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:694)
     at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:95)
     at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:75)
19.11.2008 13:07:11 oracle.sdovis.LoadThemeData run
SCHWERWIEGEND: Exception fetching data for theme RAS_DGK.
Message:GeoRaster load Exception: Can not find a GeoRaster object with specified rdt and rid.
Description:
     at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:1109)
     at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:95)
     at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:75)
19.11.2008 13:07:11 oracle.sdovis.MapMaker buildDataMBR
WARNUNG: null MBR resulted from buildDataMBR.
The errror message of MapViewer is nearly the same with some more informations about the spatial query and the coordintes of the query window. If I run that spatial query in the sqldeveloper it returns a result!
I did following stebs:
- saved a tiff-Image in a GeoRaster table with pyramid an tiled images.
- checked the sdo_geom_metadata --> they are correct
- checked the sdo_georaster object for the rdt table name and rasterid --> they are correct
- checked the rdt table --> objects with that rid are saved
- checked the mdsys.sdo_geor_sysdata table --> entry is correct
- validate the geraster with the sdo_geor.validategeoraster function --> object is valid
- updated the spatial extend of the image and try again the preview functio--> the same error
The databse server is a virtual Linux server with Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit.
The web server is a Window 2003 R2 Server with a weblogic server and mapviewer patch 5 (Ver1033p5_B081010).
For a test I did the same (the same table script, the same raster data, the same import method) on a developer pc (WinXP Pro SP2) with Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 (32bit) the same mapbuilder version but with the MapViewer QuickStartKid and it works fine!!!
Has anyone an idea?
Greeting,
Cord
Edited by: Corti on Nov 19, 2008 2:14 PM

Hi Joao,
Thanks so far.
I'm previewing a GeoRaster theme. I created it with the MapBuilder GeoRaster wizard. The theme difinition is (out of the export file):
RAS_DGK|
null|
RAS_DGK|
GEORASTER|
<?xml version="1.0" standalone="yes"?>
<styling_rules theme_type="georaster">
</styling_rules>|
(GeoRaster table name is "RAS_DGK", theme name is also "RAS_DGK")
I get following log information:
preview without a coordinate or scale:
MapBuilder Error (as pop up): MAPVIEWER 01005: no spatial data to render
log file:
20.11.2008 10:17:27 oracle.sdovis.LoadThemeData run
FEINER: LoadThemeData running thread: Thread-43
20.11.2008 10:17:27 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: Original query window: -Infinity,-Infinity,NaN,NaN
20.11.2008 10:17:27 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: [Query] select grt.GEORASTER, grt.GEORASTER.metadata.getClobVal() from RAS_DGK grt
20.11.2008 10:17:27 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: Fetch size: 100
20.11.2008 10:17:27 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
SCHWERWIEGEND: GeoRaster load Exception:
oracle.spatial.georaster.GeoRasterException: Can not find a GeoRaster object with specified rdt and rid.
     at oracle.spatial.georaster.JGeoRaster.validateConn(JGeoRaster.java:608)
     at oracle.sdovis.theme.GeoRasterThemeProducer$JGeoRasterGTP.<init>(GeoRasterThemeProducer.java:2037)
     at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:694)
     at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:95)
     at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:75)
20.11.2008 10:17:27 oracle.sdovis.LoadThemeData run
SCHWERWIEGEND: Exception fetching data for theme RAS_DGK.
Message:GeoRaster load Exception: Can not find a GeoRaster object with specified rdt and rid.
Description:
     at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:1109)
     at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:95)
     at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:75)
20.11.2008 10:17:27 oracle.sdovis.MapMaker buildDataMBR
WARNUNG: null MBR resulted from buildDataMBR.
preview with a center coordinate of the image and a scale:
20.11.2008 10:18:43 oracle.sdovis.SRS getOptimalQueryWindow
AM FEINSTEN: *** isGeodetic=false, unit=METER
20.11.2008 10:18:43 oracle.sdovis.LoadThemeData run
FEINER: LoadThemeData running thread: Thread-45
20.11.2008 10:18:43 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: Original query window: 2550045.7746478873,5608500.0,2551954.2253521127,5609500.0
20.11.2008 10:18:43 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: [Query] select grt.GEORASTER, grt.GEORASTER.metadata.getClobVal() from RAS_DGK grt WHERE MDSYS.SDO_FILTER(grt.GEORASTER.spatialextent, MDSYS.SDO_GEOMETRY(2003, 31466, NULL, MDSYS.SDO_ELEM_INFO_ARRAY(1, 1003, 3), MDSYS.SDO_ORDINATE_ARRAY(?,?,?,?)), 'querytype=WINDOW') = 'TRUE'
20.11.2008 10:18:43 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: Fetch size: 100
20.11.2008 10:18:43 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
SCHWERWIEGEND: GeoRaster load Exception:
oracle.spatial.georaster.GeoRasterException: Can not find a GeoRaster object with specified rdt and rid.
     at oracle.spatial.georaster.JGeoRaster.validateConn(JGeoRaster.java:608)
     at oracle.sdovis.theme.GeoRasterThemeProducer$JGeoRasterGTP.<init>(GeoRasterThemeProducer.java:2037)
     at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:694)
     at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:95)
     at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:75)
20.11.2008 10:18:43 oracle.sdovis.LoadThemeData run
SCHWERWIEGEND: Exception fetching data for theme RAS_DGK.
Message:GeoRaster load Exception: Can not find a GeoRaster object with specified rdt and rid.
Description:
     at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:1109)
     at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:95)
     at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:75)
20.11.2008 10:18:43 oracle.sdovis.DBMapMaker renderEm
INFO: **** time spent on loading features: 234ms.
20.11.2008 10:18:43 oracle.sdovis.RenderingEngine prepareForRendering
AM FEINSTEN: xfm: 0.284 0.0 0.0 -0.284 -724212.9999999999 1593097.9999999998
20.11.2008 10:18:43 oracle.sdovis.ImageRenderer renderGeoRasterTheme
WARNUNG: GeoRaster theme RAS_DGK has no rendered images.
20.11.2008 10:18:43 oracle.sdovis.VectorRenderer render
FEINER: time to render theme RAS_DGK with 0 styled features: 0ms
20.11.2008 10:18:43 oracle.sdovis.DBMapMaker renderEm
INFO: **** time spent on rendering: 16ms
If I run the sql statement in the log file, it returns a result.
select grt.georid, grt.GEORASTER, grt.GEORASTER.metadata.getClobVal()
from ras_dgk grt
WHERE MDSYS.SDO_FILTER(grt.GEORASTER.spatialextent,
MDSYS.SDO_GEOMETRY(2003, 31466, NULL,
MDSYS.SDO_ELEM_INFO_ARRAY(1, 1003, 3),
MDSYS.SDO_ORDINATE_ARRAY(2550045.7746478873,5608500.0,2551954.2253521127,5609500.0)), 'querytype=WINDOW') = 'TRUE';
GEORID
2
GEORASTER
MDSYS.SDO_GEORASTER(20001,MDSYS.SDO_GEOMETRY(2003,31466,null,MDSYS.SDO_ELEM_INFO_ARRAY(1,1003,3),MDSYS.SDO_ORDINATE_ARRAY(2550000,5608000,2552000,5610000)),RDT_RAS_DGK,522,oracle.xdb.XMLType@194a7ec)
GEORASTER.metadata.getClobVal()
<georasterMetadata xmlns="http://xmlns.oracle.com/spatial/georaster">
<objectInfo>
<rasterType>20001</rasterType>
<isBlank>false</isBlank>
<defaultRed>1</defaultRed>
<defaultGreen>1</defaultGreen>
<defaultBlue>1</defaultBlue>
</objectInfo>
<rasterInfo>
<cellRepresentation>UNDEFINED</cellRepresentation>
<cellDepth>8BIT_U</cellDepth>
<totalDimensions>2</totalDimensions>
<dimensionSize type="ROW">
<size>6299</size>
</dimensionSize>
<dimensionSize type="COLUMN">
<size>6299</size>
</dimensionSize>
<ULTCoordinate>
<row>0</row>
<column>0</column>
</ULTCoordinate>
<blocking>
<type>REGULAR</type>
<totalRowBlocks>4</totalRowBlocks>
<totalColumnBlocks>4</totalColumnBlocks>
<rowBlockSize>2048</rowBlockSize>
<columnBlockSize>2048</columnBlockSize>
</blocking>
<interleaving>BSQ</interleaving>
<pyramid>
<type>DECREASE</type>
<resampling>NN</resampling>
<maxLevel>6</maxLevel>
</pyramid>
<compression>
<type>NONE</type>
</compression>
</rasterInfo>
<spatialReferenceInfo>
<isReferenced>true</isReferenced>
<SRID>31466</SRID>
<modelCoordinateLocation>UPPERLEFT</modelCoordinateLocation>
<modelType>FunctionalFitting</modelType>
<polynomialModel rowOff="0" columnOff="0" xOff="0" yOff="0" zOff="0" rowScale="1" columnScale="1" xScale="1" yScale="1" zScale="1">
<pPolynomial pType="1" nVars="2" order="1" nCoefficients="3">
<polynomialCoefficients>17668678.695368 0 -3.14949718277477</polynomialCoefficients>
</pPolynomial>
<qPolynomial pType="1" nVars="0" order="0" nCoefficients="1">
<polynomialCoefficients>1</polynomialCoefficients>
</qPolynomial>
<rPolynomial pType="1" nVars="2" order="1" nCoefficients="3">
<polynomialCoefficients>-8031218.31607409 3.14949718277477 0</polynomialCoefficients>
</rPolynomial>
<sPolynomial pType="1" nVars="0" order="0" nCoefficients="1">
<polynomialCoefficients>1</polynomialCoefficients>
</sPolynomial>
</polynomialModel>
</spatialReferenceInfo>
<layerInfo>
<layerDimension>BAND</layerDimension>
<subLayer>
<layerNumber>1</layerNumber>
<layerDimensionOrdinate>0</layerDimensionOrdinate>
<layerID>1</layerID>
<colorMap>
<colors>
<cell value="0" blue="255" red="255" green="255" alpha="255"/>
<cell value="1" blue="0" red="0" green="0" alpha="255"/>
</colors>
</colorMap>
</subLayer>
</layerInfo>
</georasterMetadata>
I checked also the content of rdt table and it contains entries with that raster id (= 522).
Finally the log file when I use the preview directly on the GeoRaster table without a theme:
20.11.2008 10:23:46 oracle.sdovis.LoadThemeData run
FEINER: LoadThemeData running thread: Thread-55
20.11.2008 10:23:46 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: Original query window: -Infinity,-Infinity,NaN,NaN
20.11.2008 10:23:46 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: [Query] select grt.GEORASTER from RAS_DGK grt where grt.GEORASTER.rasterid = ? and grt.GEORASTER.rasterdatatable = ?
20.11.2008 10:23:46 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: Fetch size: 100
20.11.2008 10:23:46 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
SCHWERWIEGEND: GeoRaster load Exception:
oracle.spatial.georaster.GeoRasterException: Can not find a GeoRaster object with specified rdt and rid.
     at oracle.spatial.georaster.JGeoRaster.validateConn(JGeoRaster.java:608)
     at oracle.sdovis.theme.GeoRasterThemeProducer$JGeoRasterGTP.<init>(GeoRasterThemeProducer.java:2037)
     at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:694)
     at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:95)
     at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:75)
20.11.2008 10:23:46 oracle.sdovis.LoadThemeData run
SCHWERWIEGEND: Exception fetching data for theme RAS_DGK.
Message:GeoRaster load Exception: Can not find a GeoRaster object with specified rdt and rid.
Description:
     at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:1109)
     at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:95)
     at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:75)
20.11.2008 10:23:46 oracle.sdovis.MapMaker buildDataMBR
WARNUNG: null MBR resulted from buildDataMBR.
If you need more information - please ask for it.
Cord

The system could not find a javax.ws.rs.ext.MessageBodyWriter or a DataSourceProvider class for the com.rest.assignment.EmpBean type and application/json mediaType. Ensure that a javax.ws.rs.ext.MessageBodyWriter exists in the JAX-RS application for the

Hi,
Im trying to create a Rest WS with a @GET method that will return me an Emp object. I need the output as a JSON string.
I have created a dynamic web project and added javax RS jars:
When im trying to run this, i'm getting the below mentioned error:
FlushResultHa E org.apache.wink.server.internal.handlers.FlushResultHandler handleResponse The system could not find a javax.ws.rs.ext.MessageBodyWriter or a DataSourceProvider class for the com.rest.assignment.EmpBean type and application/json mediaType. Ensure that a javax.ws.rs.ext.MessageBodyWriter exists in the JAX-RS application for the type and media type specified.
RequestProces I org.apache.wink.server.internal.RequestProcessor logException The following error occurred during the invocation of the handlers chain: WebApplicationException (500 - Internal Server Error)
Please help as im stuck with this from long.
Thanks in advance.
Below is the code for my service class:
package com.rest.assignment;
import java.io.FileInputStream;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.util.Enumeration;
import java.util.HashSet;
import java.util.Properties;
import java.util.Set;
import javax.ws.rs.GET;
import javax.ws.rs.Path;
import javax.ws.rs.Produces;
import javax.ws.rs.core.Application;
import javax.ws.rs.core.MediaType;
import javax.ws.rs.core.Response;
@Path("/restService")
public class RestService extends Application {
    @GET
    @Path("/getEmpDetails")
    @Produces(MediaType.APPLICATION_JSON)
    public Response getStringResponse()
        EmpBean empBean = new EmpBean();
        String filePath = "C:/Program Files/IBM/workspace/HelloWorld/src/com/rest/resources/EmpData.properties";
        Properties properties = new Properties();
        try {
            properties.load(new FileInputStream(filePath));
        } catch (FileNotFoundException e) {
            e.printStackTrace();
        } catch (IOException e) {
            e.printStackTrace();
         Enumeration e = properties.propertyNames();
         String result="";
        String[] empDetailsArr;
        while (e.hasMoreElements()) {
          String key = (String) e.nextElement();
          String empDetails = properties.getProperty(key);
          empDetailsArr=empDetails.split(",");
          empBean.setFirstName(empDetailsArr[0]);
          empBean.setLastName(empDetailsArr[1]);
          empBean.setEmpId(empDetailsArr[2]);
          empBean.setDesignation(empDetailsArr[3]);
          empBean.setSkillSet(empDetailsArr[4]);
          result = empDetailsArr[1];
        //return empBean;
        return Response.ok(empBean).type(MediaType.APPLICATION_JSON_TYPE).build();
    @Override
    public Set<Class<?>> getClasses() {
        Set<Class<?>> classes = new HashSet<Class<?>>();
        classes.add(RestService.class);
        classes.add(EmpBean.class);
        return classes;
and my empBean goes like this:
package com.rest.assignment;
public class EmpBean {
    private String firstName;
    private String lastName;
    private String empId;
    private String designation;
    private String skillSet;
    public String getFirstName() {
        return firstName;
    public void setFirstName(String firstName) {
        this.firstName = firstName;
    public String getLastName() {
        return lastName;
    public void setLastName(String lastName) {
        this.lastName = lastName;
    public String getEmpId() {
        return empId;
    public void setEmpId(String empId) {
        this.empId = empId;
    public String getDesignation() {
        return designation;
    public void setDesignation(String designation) {
        this.designation = designation;
    public String getSkillSet() {
        return skillSet;
    public void setSkillSet(String skillSet) {
        this.skillSet = skillSet;
Web.xml goes like this:
<?xml version="1.0" encoding="UTF-8"?>
<web-app id="WebApp_ID" version="3.0" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_3_0.xsd">
<display-name>restWS</display-name>
<welcome-file-list>
<welcome-file>index.html</welcome-file>
<welcome-file>index.htm</welcome-file>
<welcome-file>index.jsp</welcome-file>
<welcome-file>default.html</welcome-file>
<welcome-file>default.htm</welcome-file>
<welcome-file>default.jsp</welcome-file>
</welcome-file-list>
<servlet>
<servlet-name>REST</servlet-name>
<servlet-class>com.ibm.websphere.jaxrs.server.IBMRestServlet</servlet-class>
<init-param>
   <param-name>javax.ws.rs.Application</param-name>
   <param-value>com.rest.assignment.RestService</param-value>
</init-param>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>REST</servlet-name>
<url-pattern>/rest/*</url-pattern>
</servlet-mapping>
</web-app>
When i try to return a string from my get method, it gives me a proper response. i get this exception when im trying to return a JSON response.

Hi,
Im trying to create a Rest WS with a @GET method that will return me an Emp object. I need the output as a JSON string.
I have created a dynamic web project and added javax RS jars:
When im trying to run this, i'm getting the below mentioned error:
FlushResultHa E org.apache.wink.server.internal.handlers.FlushResultHandler handleResponse The system could not find a javax.ws.rs.ext.MessageBodyWriter or a DataSourceProvider class for the com.rest.assignment.EmpBean type and application/json mediaType. Ensure that a javax.ws.rs.ext.MessageBodyWriter exists in the JAX-RS application for the type and media type specified.
RequestProces I org.apache.wink.server.internal.RequestProcessor logException The following error occurred during the invocation of the handlers chain: WebApplicationException (500 - Internal Server Error)
Please help as im stuck with this from long.
Thanks in advance.
Below is the code for my service class:
package com.rest.assignment;
import java.io.FileInputStream;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.util.Enumeration;
import java.util.HashSet;
import java.util.Properties;
import java.util.Set;
import javax.ws.rs.GET;
import javax.ws.rs.Path;
import javax.ws.rs.Produces;
import javax.ws.rs.core.Application;
import javax.ws.rs.core.MediaType;
import javax.ws.rs.core.Response;
@Path("/restService")
public class RestService extends Application {
    @GET
    @Path("/getEmpDetails")
    @Produces(MediaType.APPLICATION_JSON)
    public Response getStringResponse()
        EmpBean empBean = new EmpBean();
        String filePath = "C:/Program Files/IBM/workspace/HelloWorld/src/com/rest/resources/EmpData.properties";
        Properties properties = new Properties();
        try {
            properties.load(new FileInputStream(filePath));
        } catch (FileNotFoundException e) {
            e.printStackTrace();
        } catch (IOException e) {
            e.printStackTrace();
         Enumeration e = properties.propertyNames();
         String result="";
        String[] empDetailsArr;
        while (e.hasMoreElements()) {
          String key = (String) e.nextElement();
          String empDetails = properties.getProperty(key);
          empDetailsArr=empDetails.split(",");
          empBean.setFirstName(empDetailsArr[0]);
          empBean.setLastName(empDetailsArr[1]);
          empBean.setEmpId(empDetailsArr[2]);
          empBean.setDesignation(empDetailsArr[3]);
          empBean.setSkillSet(empDetailsArr[4]);
          result = empDetailsArr[1];
        //return empBean;
        return Response.ok(empBean).type(MediaType.APPLICATION_JSON_TYPE).build();
    @Override
    public Set<Class<?>> getClasses() {
        Set<Class<?>> classes = new HashSet<Class<?>>();
        classes.add(RestService.class);
        classes.add(EmpBean.class);
        return classes;
and my empBean goes like this:
package com.rest.assignment;
public class EmpBean {
    private String firstName;
    private String lastName;
    private String empId;
    private String designation;
    private String skillSet;
    public String getFirstName() {
        return firstName;
    public void setFirstName(String firstName) {
        this.firstName = firstName;
    public String getLastName() {
        return lastName;
    public void setLastName(String lastName) {
        this.lastName = lastName;
    public String getEmpId() {
        return empId;
    public void setEmpId(String empId) {
        this.empId = empId;
    public String getDesignation() {
        return designation;
    public void setDesignation(String designation) {
        this.designation = designation;
    public String getSkillSet() {
        return skillSet;
    public void setSkillSet(String skillSet) {
        this.skillSet = skillSet;
Web.xml goes like this:
<?xml version="1.0" encoding="UTF-8"?>
<web-app id="WebApp_ID" version="3.0" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_3_0.xsd">
<display-name>restWS</display-name>
<welcome-file-list>
<welcome-file>index.html</welcome-file>
<welcome-file>index.htm</welcome-file>
<welcome-file>index.jsp</welcome-file>
<welcome-file>default.html</welcome-file>
<welcome-file>default.htm</welcome-file>
<welcome-file>default.jsp</welcome-file>
</welcome-file-list>
<servlet>
<servlet-name>REST</servlet-name>
<servlet-class>com.ibm.websphere.jaxrs.server.IBMRestServlet</servlet-class>
<init-param>
   <param-name>javax.ws.rs.Application</param-name>
   <param-value>com.rest.assignment.RestService</param-value>
</init-param>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>REST</servlet-name>
<url-pattern>/rest/*</url-pattern>
</servlet-mapping>
</web-app>
When i try to return a string from my get method, it gives me a proper response. i get this exception when im trying to return a JSON response.

Error : ORA-06508: PL/SQL: could not find program unit being called

Hi
I got surprise issue while testing my Oracle code . Let me explain first the environment detail . Our appliaction built on
Java/J2EE(Weblogic) and backend is Oracle 11g re2 . While calling from java it call thru different user which have been provide
synonym and exectue option for corresponding procdure ,
I created on package EXTRACT_CUSTOMER_INFO_PK which will exract data to text file using UTL_FILE ( direcory , UTL_FILE grant is provided to DB user).
Now this package has been called from rp_execute_procedure_pr -- Here I is the code
CREATE OR REPLACE PROCEDURE RP_EXECUTE_PROCEDURE_PR
i_atlas_job_schedule_fk IN atlas_job_schedule.atlas_job_schedule_pk%TYPE,
i_job_id IN atlas_job.job_id%TYPE,
i_parm_value IN atlas_job_schedule.parm_value%TYPE,
o_status_code OUT NUMBER,
o_status_mesg OUT VARCHAR2
IS
-------Other old code which is not relevent for this issue ----
--------Other old code which is not relevent for this issue ----
----Below code I added ----
ELSIF l_job_id = 'CUST_EXTRACT' THEN
EXTRACT_CUSTOMER_INFO_PK.customer_report ( i_parm_value ,
o_status_code,
o_status_mesg ) ;
-- o_status_code := -99999999;
--o_status_mesg := 'PARTHA PARTHA PARTHAcess terminated!';
ELSE
o_status_code := -20300;
o_status_mesg := 'Job Id : ' || l_job_id || ' NOT found. Process terminated!';
END IF;
update_log_auto
ajs_rec.atlas_job_schedule_pk ,
'Processing End Time (GMT): '
EXCEPTION
WHEN eProcError THEN
o_status_code := SQLCODE;
o_status_mesg := SUBSTR(vMsg ||'-'||SQLERRM, 1, 200);
WHEN OTHERS THEN
o_status_code := -20300;
o_status_mesg := SUBSTR(SQLERRM, 1, 200);
update_log_auto
ajs_rec.atlas_job_schedule_pk ,
'Error : '||SQLERRM||' '
update_log_auto
ajs_rec.atlas_job_schedule_pk,
'Processing End Time (GMT): '
END RP_EXECUTE_PROCEDURE_PR;
Now It compiled sucesfully . And while I did SIT then RP_EXECUTE_PROCEDURE_PR run fine and extracted txt file . But while I called it from Java procedure It gives us error like
Error : ORA-06508: PL/SQL: could not find program unit being called 02-AUG-2012 13:16:51.
As I told RP_EXECUTE_PROCEDURE_PR old proc and used by other proc , So I first suspect issue is newly added code or may be some grant or synonym ( Although it should not be )
so I created public synony amd gave execute grant to my pkg to public .
But it repeat same error .
I did lot of R&D on my pkg but nothing happen . Finally I remane my new pkg RP_EXTRACT_CUSTOMER_INFO_PK and it works fine
I need to know what is the RCA for it . I donot think any dependecy issue as renaming pkg is working fine .
NB my DB user is iATLAS and Javauser is SUDEEP
Thanks in Advance
Debashis Mallick

First of all If i run the main procedure in like below in my Schema it is working fine
begin
-- Call the procedure
rp_execute_procedure_pr(i_atlas_job_schedule_fk => :i_atlas_job_schedule_fk,
i_job_id => :i_job_id,
i_parm_value => :i_parm_value,
o_status_code => :o_status_code,
o_status_mesg => :o_status_mesg);
end;
So thre is no question of parameter .... or Invalid state etc . If it is parameter or Invalid state issue it will give other error.
Here problem is not syntax issue .
let me give u more detail regards this issue
1.. All objects corresponding to procedure all Valid
2.. If I test on the proc on my schema like above code . It works fine
3.rp_execute_procedure_pr is a old procudere which called for differner report generartion based on parameter passing . Also as extract_customer_info_pk called with in rp_execute_procedure_pr So there is no question of synonym or privilage issue for new procedure.
4. Suprising thing is if I rename and recreate package like extract_customer_info_pk _1 or rp_extract_customer_info_pk . Which are exactly same as extract_customer_info_pk and replace those new one with extract_customer_info_pk then it work fine in my java application
I think I make it clear the issue
Edited by: debashisora on Aug 3, 2012 5:31 AM
Edited by: debashisora on Aug 3, 2012 5:40 AM

Java.lang.RuntimeException: Could not find the OffLine WLST class

Installation of OIM On weblogic.
oracle/oim/xellerate/setup/setup.xml:443: The following error occurred while executing this line:
/oracle/oim/xellerate/setup/weblogic-setup.xml:196: java.lang.RuntimeException: Could not find the OffLine WLST class
at org.apache.tools.ant.ProjectHelper.addLocationToBuildException(ProjectHelper.java:539)
at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:384)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:40)
at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
at org.apache.tools.ant.Main.runBuild(Main.java:668)
at org.apache.tools.ant.Main.startAnt(Main.java:187)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:246)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:67)
Tried to run this command ./wlst.sh
shows
CLASSPATH=/home/oracle/bea/patch_wls1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/oracle/bea/patch_cie660/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/oracle/jdk/lib/tools.jar:/oracle/weblogic/server/server/lib/weblogic_sp.jar:/oracle/weblogic/server/server/lib/weblogic.jar:/home/oracle/bea/modules/features/weblogic.server.modules_10.3.0.0.jar:/oracle/weblogic/server/server/lib/webservices.jar:/home/oracle/bea/modules/org.apache.ant_1.6.5/lib/ant-all.jar:/home/oracle/bea/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar:
PATH=/oracle/weblogic/server/server/bin:/home/oracle/bea/modules/org.apache.ant_1.6.5/bin:/oracle/jdk/jre/bin:/oracle/jdk/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/home/oracle/bin:/home/oracle/bin:/oracle/jdk/bin
Your environment has been set.
CLASSPATH=/home/oracle/bea/patch_wls1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/oracle/bea/patch_cie660/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/oracle/jdk/lib/tools.jar:/oracle/weblogic/server/server/lib/weblogic_sp.jar:/oracle/weblogic/server/server/lib/weblogic.jar:/home/oracle/bea/modules/features/weblogic.server.modules_10.3.0.0.jar:/oracle/weblogic/server/server/lib/webservices.jar:/home/oracle/bea/modules/org.apache.ant_1.6.5/lib/ant-all.jar:/home/oracle/bea/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar::/oracle/weblogic/server/common/eval/pointbase/lib/pbembedded57.jar:/oracle/weblogic/server/common/eval/pointbase/lib/pbtools57.jar:/oracle/weblogic/server/common/eval/pointbase/lib/pbclient57.jar
Initializing WebLogic Scripting Tool (WLST) ...
Problem invoking WLST - java.lang.RuntimeException: Could not find the OffLine WLST class

try Problem invoking WLST - Could not find the OffLine WLST class the last post on this thread, he claims to solve the problem...

Workspace not finding in weblogic

Similar Messages

Maybe you are looking for