Workstation policy not appearing in wmsched.exe
I have installed the desktop management client to a number of workstation
and they are registered in the workstation container in Console1. These
workstatioons will not inventory. I have looked in wmsched.exe on them
and it is empty. I have checked the workstation inventory policy and it
is configured to run from Monday to Friday from 9.00 for 14 hours. I have
tried to force a full scan with no effect. Any ideas?
Adrian,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/
Similar Messages
-
Workstation Policy not applying completely
I have created a Workstation Policy for my WinXP SP2 machines. In testing
this policy I associated it with a few workstations. I noticed that the
policy seems to work partially. An example being, I have the policy set to
remove "My Network Places" from the desktop but it does not remove it, but
most of the other restrictions that are set by this policy seem to apply
normally.
I have a user policy set the same way and it works fine. Any ideas?Rolf,
Thank you for responding. I believe you are correct about this. One problem
I see at this point is, I did have my Workstation Package set to run at user
login. I changed this to run when desktop is active, but when I check the
the Workstation scheduler on the workstation, it does list my workstation
policy package as having ran but it still shows that it is scheduled to run
at user login. I remove the workstation association to the the workstation
package, reversed the policies on the workstation using another policy
package we have setup to reverse the settings. I then reassociated the
workstation with my worstation policy package which is set to run when the
desktop is active. But in the scheduler it showed that the workstation
policy still ran at user login. If I look at the policy package in Console
One it does show that it is set to run when the desktop is active and not at
user login. So I am not sure why this is. I hope that I won't have to delete
this package and recreate to resolve this. Any suggestions are greatly
appreciated.
Steve
"Rolf Lidvall" <[email protected]> wrote in message
news:[email protected]...
> Maybe this issue?
>
>
http://www.novell.com/documentation/...2.html#aesgb5w
>
> "HINT: Because the Windows desktop files finish loading before group
policy
> settings are loaded, some group policies in the ZfD 4 workstation package
> might exhibit odd behavior if they are scheduled to run at user login.
> Specifically, any changes to desktop settings (for example, hide My
Network
> Place, hide all icons on desktop, etc.) will not occur, neither will any
> programs that you have scheduled to run at user login through use of a
login
> script. If the user logs off and back on, the settings display correctly.
>
> To prevent this behavior, do not configure group policies in the
Workstation
> package to run at user login. Instead, configure them to run at system
> startup, on a daily basis, or on some other regular schedule."
>
> Regards
> Rolf Lidvall
> Swedish Radio (Ltd)
>
> -
Import/removal policy not working javax.naming.NameNotFound
Hi, i am experiencing some problems with my import/removal policy...more so the removal workstation policy not working.
When the policy schedule time initiates - the following shows up on the zenworks removal workstation removal screen:
30-Oct-2009 17:35:39 javax.naming.NameNotFoundException [Root exception is com.novell.service.jncp.NDSException: ccode = -601 (0xfffffda7)]
I keep seeing this on the screen and in the zenwsrem.log file.
I am running:
Zenworks 6.5 sp2
Netware 6.5 sp5
Can anyone help as i want to keep my tree clean from all the thousands of workstation objects that are generating and are mostly redundant.
Any help with this would be very helpful.
I do not know why this is happening...i have read a few tids, but the naming of my container does not use any special characters, just "Workstations".
regards
DennisDid any of the removals succeed?
i.e.
20-Sep-2009 23:00:31 Removed workstation:T82715.Workstations.BilletRd.WF
20-Sep-2009 23:00:32 Removed workstation:T87490.Workstations.BuxtonRd.WF
20-Sep-2009 23:00:32 Removed workstation:T87810.Workstations.BuxtonRd.WF
Are they still in eDir?
I'm assuming that edir is clean.. so the only other thing that would come to
mind is that the server/workstation policy doesn't have rights to delete
from the OU's your workstations are in?
I didn't go thru the log exactly line by line, but it looks like its always
bombing on workstations in
your BuxtonRd.WF and CecilRd.WF containers.
>>> On 11/5/2009 at 10:26 AM, in message
<[email protected]>,
dchitolie<[email protected]> wrote:
> In relation to the tid, i do not have any / in my containers?
> Here is my Zenwsrem.log:
>
> NameNotFoundException [Root exception
> iscom.novell.service.jncp.NDSException: ccode = -601 (0xfffffda7)]
> 27-Dec-2008 23:00:04 javax.naming.NameNotFoundException [Rootexception
> is com.novell.service.jncp.NDSException: ccode = -601(0xfffffda7)]
> 03-Jan-2009 23:00:03 Removed
workstation:T87306.Workstations.BuxtonRd.WF
> 03-Jan-2009 23:00:04 javax.naming.NameNotFoundException [Rootexception
> is com.novell.service.jncp.NDSException: ccode = -601(0xfffffda7)]
> 10-Jan-2009 23:00:50 Removed
workstation:T84740.Workstations.BilletRd.WF
> 10-Jan-2009 23:00:50 Removed
workstation:T87424.Workstations.BilletRd.WF
> 10-Jan-2009 23:00:50 Removed
workstation:T87324.Workstations.BuxtonRd.WF
> 10-Jan-2009 23:00:51 javax.naming.NameNotFoundException [Rootexception
> is com.novell.service.jncp.NDSException: ccode = -601(0xfffffda7)]
> 17-Jan-2009 23:00:16 javax.naming.NameNotFoundException [Rootexception
> is com.novell.service.jncp.NDSException: ccode = -601(0xfffffda7)]
> 31-Jan-2009 23:00:07 Removed
workstation:T85290.Workstations.BilletRd.WF
> 31-Jan-2009 23:00:08 javax.naming.NameNotFoundException [Rootexception
> is com.novell.service.jncp.NDSException: ccode = -601(0xfffffda7)]
>
> 14-Mar-2009 23:00:36 Removed
workstation:T87327.Workstations.BuxtonRd.WF
> 14-Mar-2009 23:00:37 Removed
workstation:T87484.Workstations.BuxtonRd.WF
> 14-Mar-2009 23:00:39 Removed workstation:T93380.Workstations.CecilRd.WF
> 14-Mar-2009 23:00:39 javax.naming.NameNotFoundException [Rootexception
> is com.novell.service.jncp.NDSException: ccode = -601(0xfffffda7)]
> 22-Mar-2009 23:00:04 javax.naming.NameNotFoundException [Rootexception
> is com.novell.service.jncp.NDSException: ccode = -601(0xfffffda7)]
> 28-Mar-2009 23:00:48 Removed workstation:T88849.Workstations.CecilRd.WF
> 28-Mar-2009 23:00:49 javax.naming.NameNotFoundException [Rootexception
> is com.novell.service.jncp.NDSException: ccode = -601(0xfffffda7)]
> 29-Mar-2009 23:00:27 javax.naming.NameNotFoundException [Rootexception
> is com.novell.service.jncp.NDSException: ccode = -601(0xfffffda7)]
> 02-Apr-2009 17:51:08 Could not authenticate as policy:
> 05-Apr-2009 23:00:31 Removed workstation:T8102T.Workstations.CecilRd.WF
> 05-Apr-2009 23:00:32 javax.naming.NameNotFoundException [Rootexception
> is com.novell.service.jncp.NDSException: ccode = -601(0xfffffda7)]
> 12-Apr-2009 23:00:23 javax.naming.NameNotFoundException [Rootexception
> is com.novell.service.jncp.NDSException: ccode = -601(0xfffffda7)]
> 17-Apr-2009 11:12:04 Could not authenticate as policy:
> 19-Apr-2009 23:00:23 javax.naming.NameNotFoundException [Rootexception
> is com.novell.service.jncp.NDSException: ccode = -601(0xfffffda7)]
> 26-Apr-2009 23:00:21 javax.naming.NameNotFoundException [Rootexception
> is com.novell.service.jncp.NDSException: ccode = -601(0xfffffda7)]
> 03-May-2009 22:59:55 javax.naming.NameNotFoundException [Rootexception
> is com.novell.service.jncp.NDSException: ccode = -601(0xfffffda7)]
> 10-May-2009 23:00:04 Removed workstation:T88842.Workstations.CecilRd.WF
> 10-May-2009 23:00:04 javax.naming.NameNotFoundException [Rootexception
> is com.novell.service.jncp.NDSException: ccode = -601(0xfffffda7)]
> 17-May-2009 23:00:22 javax.naming.NameNotFoundException [Rootexception
> is com.novell.service.jncp.NDSException: ccode = -601(0xfffffda7)]
> 24-May-2009 22:59:47 javax.naming.NameNotFoundException [Rootexception
> is com.novell.service.jncp.NDSException: ccode = -601(0xfffffda7)]
> 31-May-2009 23:00:15 javax.naming.NameNotFoundException [Rootexception
> is com.novell.service.jncp.NDSException: ccode = -601(0xfffffda7)]
> 07-Jun-2009 23:00:49 javax.naming.NameNotFoundException [Rootexception
> is com.novell.service.jncp.NDSException: ccode = -601(0xfffffda7)]
> 14-Jun-2009 23:00:04 javax.naming.NameNotFoundException [Rootexception
> is com.novell.service.jncp.NDSException: ccode = -601(0xfffffda7)]
> 21-Jun-2009 23:00:38 Removed workstation:T88834.Workstations.CecilRd.WF
> 21-Jun-2009 23:00:38 javax.naming.NameNotFoundException [Rootexception
> is com.novell.service.jncp.NDSException: ccode = -601(0xfffffda7)]
> 28-Jun-2009 08:09:11 No removal policy found.
> 28-Jun-2009 09:08:54 No removal policy found.
> 28-Jun-2009 10:08:37 No removal policy found.
> 28-Jun-2009 11:08:20 No removal policy found.
> 28-Jun-2009 12:08:03 No removal policy found.
> 28-Jun-2009 13:07:45 No removal policy found.
> 28-Jun-2009 14:07:28 No removal policy found.
> 28-Jun-2009 15:07:11 No removal policy found.
> 28-Jun-2009 16:06:55 No removal policy found.
> 28-Jun-2009 17:06:37 No removal policy found.
> 28-Jun-2009 18:06:20 No removal policy found.
> 28-Jun-2009 19:06:03 No removal policy found.
> 28-Jun-2009 20:05:46 No removal policy found.
> 28-Jun-2009 21:05:29 No removal policy found.
> 28-Jun-2009 22:05:12 No removal policy found.
> 28-Jun-2009 22:55:58 No removal policy found.
> 28-Jun-2009 23:04:55 No removal policy found.
> 29-Jun-2009 00:04:38 No removal policy found.
> 29-Jun-2009 01:04:21 No removal policy found.
> 29-Jun-2009 02:04:04 No removal policy found.
> 29-Jun-2009 03:03:47 No removal policy found.
> 29-Jun-2009 04:03:30 No removal policy found.
> 29-Jun-2009 05:03:13 No removal policy found.
> 29-Jun-2009 06:02:56 No removal policy found.
> 29-Jun-2009 07:02:38 No removal policy found.
> 29-Jun-2009 08:02:22 No removal policy found.
> 29-Jun-2009 09:02:05 No removal policy found.
> 05-Jul-2009 23:00:30 javax.naming.NameNotFoundException [Rootexception
> is com.novell.service.jncp.NDSException: ccode = -601(0xfffffda7)]
> 12-Jul-2009 23:00:44 Removed workstation:T82363.Workstations.CecilRd.WF
> 12-Jul-2009 23:00:44 javax.naming.NameNotFoundException [Rootexception
> is com.novell.service.jncp.NDSException: ccode = -601(0xfffffda7)]
> 19-Jul-2009 23:00:28 javax.naming.NameNotFoundException [Rootexception
> is com.novell.service.jncp.NDSException: ccode = -601(0xfffffda7)]
> 26-Jul-2009 23:00:19 javax.naming.NameNotFoundException [Rootexception
> is com.novell.service.jncp.NDSException: ccode = -601(0xfffffda7)]
> 02-Aug-2009 23:00:41 javax.naming.NameNotFoundException [Rootexception
> is com.novell.service.jncp.NDSException: ccode = -601(0xfffffda7)]
> 09-Aug-2009 23:00:22 javax.naming.NameNotFoundException [Rootexception
> is com.novell.service.jncp.NDSException: ccode = -601(0xfffffda7)]
> 16-Aug-2009 23:00:22 Removed
workstation:T85264.Workstations.BuxtonRd.WF
> 16-Aug-2009 23:00:22 Removed
workstation:T85266.Workstations.BuxtonRd.WF
> 16-Aug-2009 23:00:24 javax.naming.NameNotFoundException [Rootexception
> is com.novell.service.jncp.NDSException: ccode = -601(0xfffffda7)]
> 23-Aug-2009 23:00:20 Removed
workstation:T85261.Workstations.BuxtonRd.WF
> 23-Aug-2009 23:00:21 javax.naming.NameNotFoundException [Rootexception
> is com.novell.service.jncp.NDSException: ccode = -601(0xfffffda7)]
> 30-Aug-2009 23:00:02 javax.naming.NameNotFoundException [Rootexception
> is com.novell.service.jncp.NDSException: ccode = -601(0xfffffda7)]
> 06-Sep-2009 23:00:19 Removed workstation:T82722.Workstations.CecilRd.WF
> 06-Sep-2009 23:00:20 javax.naming.NameNotFoundException [Rootexception
> is com.novell.service.jncp.NDSException: ccode = -601(0xfffffda7)]
> 13-Sep-2009 23:00:13 Removed
workstation:T85336.Workstations.BilletRd.WF
> 13-Sep-2009 23:00:15 javax.naming.NameNotFoundException [Rootexception
> is com.novell.service.jncp.NDSException: ccode = -601(0xfffffda7)]
> 20-Sep-2009 23:00:31 Removed
workstation:T82715.Workstations.BilletRd.WF
> 20-Sep-2009 23:00:32 Removed
workstation:T87490.Workstations.BuxtonRd.WF
> 20-Sep-2009 23:00:32 Removed
workstation:T87810.Workstations.BuxtonRd.WF
> 20-Sep-2009 23:00:33 javax.naming.NameNotFoundException [Rootexception
> is com.novell.service.jncp.NDSException: ccode = -601(0xfffffda7)]
> 27-Sep-2009 23:00:03 Removed
workstation:T85179.Workstations.BilletRd.WF
> 27-Sep-2009 23:00:04 Removed
workstation:T87494.Workstations.BuxtonRd.WF
> 27-Sep-2009 23:00:05 javax.naming.NameNotFoundException [Rootexception
> is com.novell.service.jncp.NDSException: ccode = -601(0xfffffda7)]
> 04-Oct-2009 23:00:22 javax.naming.NameNotFoundException [Rootexception
> is com.novell.service.jncp.NDSException: ccode = -601(0xfffffda7)]
> 11-Oct-2009 23:00:03 javax.naming.NamingException [Root exception
> iscom.novell.service.jncp.NDSException: ccode = -637
> (0xfffffd83)];remaining name 'T87395'
> 11-Oct-2009 23:00:04 javax.naming.NameNotFoundException [Rootexception
> is com.novell.service.jncp.NDSException: ccode = -601(0xfffffda7)]
> 18-Oct-2009 23:00:35 Removed
workstation:T87395.Workstations.BuxtonRd.WF
> 18-Oct-2009 23:00:36 javax.naming.NameNotFoundException [Rootexception
> is com.novell.service.jncp.NDSException: ccode = -601(0xfffffda7)]
> 30-Oct-2009 17:30:31 javax.naming.NameNotFoundException [Rootexception
> is com.novell.service.jncp.NDSException: ccode = -601(0xfffffda7)]
> 30-Oct-2009 17:35:39 javax.naming.NameNotFoundException [Rootexception
> is com.novell.service.jncp.NDSException: ccode = -601(0xfffffda7)]
>
> Any ideas.....
> thanks
> regards
>
> Dennis--
dchitolie-------------------------------------------------------------------
-----dchitolie's Profile:
> http://forums.novell.com/member.php?userid=4304View this thread:
> http://forums.novell.com/showthread.php?t=391202 -
Everytime I turn on my computer running on Windows XP, a message appears from AppleSynchNotifier.exe - Unable to Locate Component -
"This application has failed to start because CoreFoundation.dll was not found. Re-installing the application may fix this problem.
I uninstalled and re-installed itunes and the message still appears.
How do I fix this??
Thank youWith that one, first try uninstalling and reinstalling your MobileMe Control Panel for Windows, robin. Does that make the error go away?
-
I am trying to install Illustrator C6 on new system (Win8.1), Already de-activated from old system. I downloaded the 3 files. First file opened and had fonts, but second file (1.8Gb) does not open; does not appear to have an exe file. How do i install?
what files (names and extensions) did you download?
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'. -
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.Or if you've recently got the phone unlocked then you'll need to connect it to itunes and then do a fresh restore to unlock it ,although for most users simply connecting to itunes for few seconds did the trick.
-
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information
what can in do?Well unfortunatly that advice does not always work. I bought a unlocked iphone4 from apple several years ago and went to att on a no contract basis. Six months later the phone crashed while updating the operating system. Apple replaced the phone with a new one. All is fine till I got a iphone5 and gave te phone to my cousin. The phone is now locked to att but att says the IMEI number is not a valid ATT IMEI and therfore cant unlock it. Apple says there is nothing They can or are willing to do so now I am stuck for a 600.00 phone that can't be used.
If anyoun knows a way naround this situation mI would appreciate a heads up. -
Msg_server.exe not appearing in SAP management console
Hi Experts,
First of all I want to tell you that I am new to BASIS activities. I am trying to learn installation and error handling.
I have installed R3 Enterprise 4.70x 2.00 SR1 on Win SQL Server and everything was successful. Now when I try to start SAP from console, msg_server.exe does not appear in the process list and dispatcher status is u201CRunning but message server unreachableu201D. Also in WP Tables, I can only see two DIA processes.
I can give you developer trace file dev_ms and dev_w0 for your reference if you need them.
Thanks in advance,
Brahmatrc file: "dev_ms", trc level: 1, release: "640"
[Thr 1240] Sat Jun 26 03:03:37 2010
[Thr 1240] systemid 560 (PC with Windows NT)
[Thr 1240] relno 6400
[Thr 1240] patchlevel 0
[Thr 1240] patchno 12
[Thr 1240] intno 20020600
[Thr 1240] pid 3740
[Thr 1240] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 3740) [msxxserv.c 1637]
[Thr 1240] MsHttpInit: full qualified hostname = epgsupg
[Thr 1240] HTTP logging is switch off
[Thr 1240] set HTTP state to LISTEN
[Thr 1240] *** I listen to port sapmsEUG (3600) ***
[Thr 1240] *** HTTP port 8100 state LISTEN ***
[Thr 1240] CUSTOMER KEY: >N1690537953<
[Thr 1240] Sat Jun 26 03:04:14 2010
[Thr 1240] MsHttpReadUrl: H-1 url = /sap/public/icf_info/logon_groups (403 Forbidden)
[Thr 1240] MsHttpReadUrl: H-1 url = /sap/public/icf_info/urlprefix (403 Forbidden)
[Thr 1240] Sat Jun 26 03:35:57 2010
[Thr 1240] MsSExit: received SIGINT (2)
[Thr 1240] ***LOG Q02=> MsSHalt, MSStop (Msg Server 3740) [msxxserv.c 5188] -
Everytime I send an email the warning box appears--- WebKit2 WebProcess,exe has stopped working. Then I hit close program and it shuts me out of my inbox.
If I don't close the warning box my computer stay s in limbo. What is is? It is not in my control panel and does not come up as a program in my computer.
Help?Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair". -
I have a Windows 2008 R2 Domain Controllers and have a Policy to put a specify wallpaper, eventuality i have to change the Wallpaper, this setting applied sucesfully in Windows xp and Windows 7 workstations, but not applied in Windows 8 workstations even
if i run gpupdate /forcé,
Best Regards,
Thank youHi,
Thanks for posting in the forum.
Before going further, would you please let me know how did you configure the Group Policy setting to deploy the wallpaper? Have you configured some settings to limit the scope the GPO applying?
If all Windows 8 machines failed to receive the GPO settings? In order to narrow down the cause of the issue, I suggest we could try to collect the following information for troubleshooting.
GPMC.log
==================
a. On domain controller, click Start ->Run, type GPMC.MSC, it will load the GPMC console.
b. Right click on "Group Policy Result" and choose wizard to generate a report for the problematic computer and user account (please place appropriately). (Choose computer and select the proper
user in the wizard)
c. Right click
the resulting group policy result and click the "Save Report…" => save report to save the report to a HTML file.
Once we get the report, please check if the settings have been applied to the target correctly.
In addition, would you please let me know whether you have imported the latest Windows 8 Administrative Templates to the Windows Server 2008 DC? If not, please try to download and import it.
Then try to configure the wallpaper GPO settings again to see if it could help.
For details, please refer to the following articles.
Administrative Templates (.admx) for Windows 8 and Windows Server 2012
http://www.microsoft.com/en-us/download/details.aspx?id=36991
Set Desktop Background via Group Policy in Windows 7, Windows 8 in a Server 2008 or Server 2012 Domain
http://dizzyit.com/2013/04/14/set-desktop-background-group-policy-windows-7-windows-8-server-2008-server-2012-domain/
Hope this helps.
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Andy Qi
TechNet Community Support -
Unable to install Netgear XE102 on my iMac. Checked Netgear website and could not find a setup.exe file for Mac.
That means either no software needs to be installed on a Mac or the product is incompatible with Macs. Contact NetGear tech support for help.
-
Currently we are running ZfD 7 and Netware 6.5 and have recently upgraded all our workstations to Windows XP Service Pack 2. Our tree structure consists of an OU for each school level, elementary, middle, and high, and an OU for each school in that respective level. Example:
Elementary
West Main
South Main
Middle
Brown Middle
The current contents in each School OU have users, groups, policies, ect. Previously policy was applied by a workstation policy package that distributed all policies: user, machine, and security which were associated with the School OU. Now we split the policy into workstation packages and a user packages. The goal was to have the workstation apply the machine and security policy and the user policy to apply user settings and create dynamic the local user account.
The workstation policy remains persistent on the workstation while the user policy creates a local user (non-volatile) and applies the user policy from a server path depending on group membership. We have four different user policy packages: Student, Teacher, Specialist and Technology. Each with there own group policy user configuration. Everyone in our Tree has the appropriate permissions to access the policies. We configure the user policy package as follows:
Policies Windows XP
Enabled Dynamic Local User
Enabled Windows Group Policy
Workstation Manager
Network Location
\\serverpath
Checked User Configuration
Policy Schedule
User Desktop is active
Advanced Schedule
Impersonation
Interactive User
Associations
Groups (Teachers, Students)
I can get the workstation policy to apply with no problem. The problem comes when a users logs on. It doesnt matter if a new user is being created or if they are simply just switching users. User group policy doesnt apply randomly. The strange thing is it does copy down to the machine. If I connect to the admin share on a newly imaged workstation (with no policy applied) and open c:\windows\system32\ you see the creation of GroupPolicy.Usercache Folder and it copies to the GroupPolicy Folder which is were it applies policy from. Also you can see policy dynamically changing if different users logs on. The Registry.pol updates in the c:\windows\system32\ GroupPolicy.Usercache\User folder and c:\windows\system32\ GroupPolicy \User Sometimes group policy applies and sometimes it does not. When a user logs on you see the policy that was copied down apply. For example the run option is taken away from the start menu. During the log on process this remains in effect but when the process completes its almost like policy is take away. When this occurs I can run WMSCHED.Exe and reapply the user policy and it will apply sometimes. I tried applying group policy through both groups and organizational units. Both with the same results. I was wondering if anyone has had issues with applying group policy with ZEN or if I am doing this incorrectly. Any help would be much appreciated. Thanks.rscurr,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Workstation policies not refreshing...
Hi,
We have a number on workstations in one area of our university whose desktop policies do not refresh following build/rebuild.
Workstations are members of a group and a policy package is associated with that group which deploys printers and makes some tweaks. The workstation can be rebooted any number of times but the policies don't appear. Run wmsched and click "Refresh" and there they are.
Is there a means of forcing the workstation to refresh its policies (other than by manual intervention) or troubleshooting what might be going on?
We're using Zenworks 7 and Windows XP SP2 and SP3 clients.
Thanks in advance,
MattThe only way I've ever been able to reliably refresh policy is with a reboot (workstation) or login (user). Some settings will update via the wmsched.exe tool, but not consistently.
~Todd
Originally Posted by leekie
Hi,
We have a number on workstations in one area of our university whose desktop policies do not refresh following build/rebuild.
Workstations are members of a group and a policy package is associated with that group which deploys printers and makes some tweaks. The workstation can be rebooted any number of times but the policies don't appear. Run wmsched and click "Refresh" and there they are.
Is there a means of forcing the workstation to refresh its policies (other than by manual intervention) or troubleshooting what might be going on?
We're using Zenworks 7 and Windows XP SP2 and SP3 clients.
Thanks in advance,
Matt -
Policy not being applied to users
I have a group policy that used to work, but now has decided it does not want to be applied to the workstations anymore. I don't know what may have happened to make is stop working.
It's a pretty restrictive policy for students. I have the exact same policy for two other groups of students that still work. All three policies were copied from the same set of files. In other words, I make a change to one, then copy the files to the other two because they reside on different servers. Yes, I do open each one in C1 to update the timestamp.
When I run wmsched, the policy is there in the list, but the settings are not applied. I can log in to the PC with one of the other student accounts and their policy is applied.
The login I'm using to test with has R rights to the policy location - the same rights that the other users have to their policies. I have also tried more rights with no different results.
The DLU part of the policy runs, and I have turned off the windows firewall. I have also created a brand new policy from scratch to rule out any corruption in the old policy and I get the same results.
Apparantly, my workstation policy for this group is not being applied either. The other two groups' policies apply like they are supposed to. So this means that neither policy assigned to this group of students/workstations is working.
Any ideas?
ThanksFishEggStew,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/ -
Inventory Policy not showing up in the scheduler - XP
We are testing an XP flavor of the company-wide image. I noticed none of
the XP test systems have the Workstation Policy in the scheduler. Zen is
running OK, Windows 2000 clients have the policy in the scheduler, I can
ping zenwsimport. I am using Netware 4.2 SP2 client. One thing I noticed
is that there is no executable called ntscan.exe on the XP systems. I
executed WSREG32, but the machine still did not register itself in
the "Workstations" container. We are using Console One 1.3.5. The policy
packages were created with that version. I only found one TID referencing
my problem...TID10084969....but the solution is not relevant in my case.
Can anyone offer a solution. Please reply to [email protected]Cmosieee,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/
Maybe you are looking for
-
Could not complete the command because there is not enough memory (RAM)
Hi Folks: I am running into an error (Could not complete the command because there is not enough memory (RAM)) when trying to open any file of any size or any format.on my Mac. This error occurs when: No other applications or files are open Upon a fr
-
Issue Putting Data from ArrayCollection into List
I'm having trouble getting data that has been pulled from a textArea and put into an ArrayCollection to be displayed in a List. The data is being saved and then read as a file from local storage. When I run the application, nothing appears in the c
-
Model not rendering with no UI in Applet
I am currently working on an implementation of AutoVue that calls for the applet to have no UI and to just display the model. I have found that when I remove the UI form the applet the model does not render or display until I do something to the page
-
Songs I don't own showing in iCloud
Hi, this is a weird one. Basically I was browsing the iTunes app on my iPhone 4 (running the dreaded iOS6) and went into the purchased section. I saw there was an option to download songs not on my iPhone. Navigated to this and downloaded a couple so
-
NW 6.5 SP5 server, I have to regenerate the key for tomcat (TCKEYGEN) and restarted TOMCAT and was able to access iManager without problem. However,when I access https://ipaddress:2200, I got message "service temporarily unavailable". Did ADMSRVDN &