Error in accessing port 2200

NW 6.5 SP5 server, I have to regenerate the key for tomcat (TCKEYGEN) and
restarted TOMCAT and was able to access iManager without problem.
However,when I access https://ipaddress:2200, I got message "service
temporarily unavailable". Did ADMSRVDN & ADMSRVUP but still have the same
error.
Any help would be appreciated.
Thanks
Gina

No, just rebooted the server again and then was able to access the port.
So I guess I should have done the following steps:
admsrvdn
tcadmdn
admsrvup
tcadmup
Right?
Thanks again.
Gina
> [email protected] wrote:
>
> >Did ADMSRVDN & ADMSRVUP but still have the same
> >error.
>
> did you also do tcadmdn and tcadmup?
>
> --
> Joe Moore
> Novell Support Forums SysOp

Similar Messages

"Error while accessing porting layer for ORACLE database via getSessionId()

Hi,
My ejb3.0 Entity is created from Emp table in scott/tiger schema of an Oracle 10g database. I am guessing I made some mistake creating the datasource or uploading the driver, because when I run my application, I get a long exception stack trace. The bottom-most entry in the stack trace is:
Caused by: com.sap.sql.log.OpenSQLException: Error while accessing porting layer for ORACLE database via getSessionId().
     at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:148)
     at com.sap.sql.jdbc.direct.DirectConnectionFactory.createPooledConnection(DirectConnectionFactory.java:527)
     at com.sap.sql.jdbc.direct.DirectConnectionFactory.createDirectPooledConnection(DirectConnectionFactory.java:158)
     at com.sap.sql.jdbc.direct.DirectConnectionFactory.createDirectPooledConnection(DirectConnectionFactory.java:118)
     at com.sap.sql.connect.factory.PooledConnectionFactory.createPooledConnection(PooledConnectionFactory.java:119)
     at com.sap.sql.connect.factory.DriverPooledConnectionFactory.getPooledConnection(DriverPooledConnectionFactory.java:38)
     at com.sap.sql.connect.datasource.DBDataSourceImpl.createPooledConnection(DBDataSourceImpl.java:685)
     at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.matchPool(DBDataSourcePoolImpl.java:1081)
     at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.matchPooledConnection(DBDataSourcePoolImpl.java:919)
     at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.getConnection(DBDataSourcePoolImpl.java:67)
     at com.sap.engine.core.database.impl.DatabaseDataSourceImpl.getConnection(DatabaseDataSourceImpl.java:36)
     at com.sap.engine.services.dbpool.spi.ManagedConnectionFactoryImpl.createManagedConnection(ManagedConnectionFactoryImpl.java:123)
     ... 90 more

Actually, now (after the GRANT described in my reply before) the Exception has changed to:
Caused by: com.sap.sql.log.OpenSQLException: Error while
accessing porting layer for ORACLE database via
<b>getDatabaseHost</b>().
     at com.sap.sql.log.Syslog.createAndLogOpenSQLException
(Syslog.java:148)
     at com.sap.sql.jdbc.direct.DirectConnectionFactory.
createPooledConnection(DirectConnectionFactory.java:527)
     at com.sap.sql.jdbc.direct.DirectConnectionFactory.
createDirectPooledConnection(DirectConnectionFactory.java:158)
     at com.sap.sql.jdbc.direct.DirectConnectionFactory.
createDirectPooledConnection(DirectConnectionFactory.java:118)
     at com.sap.sql.connect.factory.PooledConnectionFactory.
createPooledConnection(PooledConnectionFactory.java:119)
     at com.sap.sql.connect.factory.DriverPooledConnectionFactory.
getPooledConnection(DriverPooledConnectionFactory.java:38)
     at com.sap.sql.connect.datasource.DBDataSourceImpl.
createPooledConnection(DBDataSourceImpl.java:685)
     at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.
matchPool(DBDataSourcePoolImpl.java:1081)
     at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.
matchPooledConnection(DBDataSourcePoolImpl.java:919)
     at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.
getConnection(DBDataSourcePoolImpl.java:67)
     at com.sap.engine.core.database.impl.DatabaseDataSourceImpl.
getConnection(DatabaseDataSourceImpl.java:36)
     at com.sap.engine.services.dbpool.spi.
ManagedConnectionFactoryImpl.createManagedConnection(ManagedConnectionFactoryImpl.java:123)
     ... 90 more

Error while accessing an external application...

Hi,
I am trying to configure a portal application by using SSO to get access to a deployed J2ee application. I have created the iView and mapped the user to the J2EE application. The Iview is working fine and i got the main page of the application.
But i have found a problem here.
I am using a javascript menu to invoke different pages in the j2ee application from the main page. When i invoke a menu item, I am getting a javascript error as "Access Denied" and the action gets cancelled...
Can you please share your knowledge on the possiblities of this error?
Is it because the application is working under porta frame work scope? If so how can i change it?
Best regards,
Sudheesh

Sounds like an issue that has to do with JavaScript Origin policy. You'll have to use Domain Relaxing for this. Read all about it here:
http://help.sap.com/saphelp_nw04/helpdata/en/59/87b54064c2742ae10000000a155106/frameset.htm
here:
http://help.sap.com/saphelp_nw04/helpdata/en/5e/473d4124b08739e10000000a1550b0/frameset.htm
and here:
http://help.sap.com/saphelp_nw04/helpdata/en/cb/f8751d8c6b254dac189f4029c76112/frameset.htm

Error 406 access denied while trying to Add Windows 2008 HV host in SCVMM 2008.

I am trying to add Windows 2008 HV host in SCVMM 2008. While adding host i am getting error message...
Error (406)
Access
has been denied while contacting the server <server name>.
Recommended
Action
1.
Verify that the specified user account has administrative privileges on <server name>.
2.
Verify that DCOM access, launch, and activation permissions are enabled on <server name> for the Administrators group. Use dcomcnfg.exe to modify
permissions, and then try the operation again.
I have already done DCOM security modification for my user. I am able to RDP or any file sharing HV host from SCVMM machine. My user is member of local administrator for both the machines.
Before that i have added one Windows 2008 HV (Core) successfully and 2 ESX host in same SCVMM machine.
Any Help would be greatly appreciated.
vaibhav

Has anyone found a fix for this? I've been troubleshooting this issue for 4 days now. I've unjoined/rejoined the host to the domain, deleted SCVMM certificate, given permissions (out the wahzoo) in COM/Access Permissions, all updates installed, firewall
is off (I even tried turning it on and configuring program/port access), I've tried with 3 different domain accounts that are a member of the local Administrators group.
The other day I managed to get the host added (don't ask me how) but then all the VM's were in status 'Host not responding' so I couldn't even manage them. So I removed it and now can't get the host added again. I'm using SCVMM 2008 R2 SP1 and the problem
host is Server 2008 R2 SP1 x64.
Error (406)
Access has been denied while contacting the server xxxxxxxx.domain.com.
Recommended Action
1. Verify that the specified user account has administrative privileges on xxxxxxx.domain.com.
2. Verify that DCOM access, launch, and activation permissions are enabled on xxxxxxx.domain.com for the Administrators group. Use dcomcnfg.exe to modify permissions, and then try the operation again.
I was getting this error after I got the host added:
Error (2910)
VMM does not have appropriate permissions to access the resource C:\Windows\system32\qmgr.dll on the xxxxxxxx.domain.com server.
(Access is denied (0x80070005))
Recommended Action
Ensure that Virtual Machine Manager has the appropriate rights to perform this action.

Error in accessing Processes in a Clustered WLS Environment

Hi all,
We are running a clustered deployment of OBPM in WLS. The cluster is behaving properly execpt published and deployed projects are displaying the following error when accessing the workspace:
The Process '/FooRequestProcess#Default-1.0' is not available.
The Process '/FooCenterRequestProcess#Default-1.0' is not available. Caused by: Process '/FooRequestProcess#Default-1.0' not available. Caused by: Cannot reach engine 'bpmQAengine' at URL: ''. Caused by: While trying to lookup 'engines.bpmQAengine' didn't find subcontext 'engines'. Resolved ''
Now, there was an issue with the JDBC Data Source in WLS which has since been fixed otherwise neither the engine or workspace would have come up. I have rebuilt and redeployed the engine, and I have undeployed and unplished the project then republished and redeployed it yet I still see this error.
The XA definitions are correct. Does anyone have a clue as to the cause of this?
TIA,
IGS

Hi,
Am getting the same error
The Process '/ExpenseReport#Default-1.0' is not available.
The Process '/ExpenseReport#Default-1.0' is not available. Caused by: Process '/ExpenseReport#Default-1.0' not available. Caused by: Cannot reach engine 'Engine3' at URL: ''. Caused by: While trying to lookup 'engines.Engine3' didn't find subcontext 'engines'. Resolved ''
When i tried checking --reload from directory am getting the following error
Error Caused by: JMX connection for J2EE_WEBLOGIC could not be established. URL: service:jmx:t3://cdi-server1.apac.apl.com:8101/jndi/weblogic.management.mbeanservers.runtime. Caused by: User: weblogic, failed to be authenticated.
Am not sure of this error... Please advice how to recitfy.. I have given the host and port correctly (pointed to one of the managed server)
The most interesting part is I have configured cluster in distributed environment. I have deployed the project to a cluster with two managed servers. one managed server is configured to another physical server..
When i try the workspace with server1:9001\workspace am able to see the deployed processes without any errors/exceptions
but when i try the workspace with server2:9002\workspace am getting process unavailable error..
server1:9001 -- managed server1 of the cluster to which the process is deployed
server2:9002 - managed server2 of the cluster to which the process is deployed
Kindly help
Thanks,
Charan
Edited by: charan27 on May 26, 2010 5:24 AM

Error While Accessing Universe Designer

Hi All,
I am facing an strange issue - I have BO Installation on windows server - 2003.
As a client when iam trying to access the server from diffrent location i am able to access CMC and Polestar.
But When i am trying to access universe designer - it shows an error -
Cannot access Repository ( uSR0013)
[repo_proxy 13] SessionFacade::openSessionLogon with user info has failed(Transport error: Communication failure.(FWM 00001)
(hr=#0x80042a01)
Any suggestion.
I am able to telnet my server ip with port 6400 and 8080.
Thanks

I think there is some problem because of firewalls.
Could some one tell me what are the list of ports need to be opned for server client model.
i asked network team to open the ports 6400 -6410 only.
Do i need to open ports ??
My BO server installation is default and CMS is on - 6400. and i haven't configured anything else.
pls suggest the approach.
Thanks

Error in Accessing EJB in OC4J embedded in Oracle Application server 10G

Hello All,
I am getting below error while accessing my EJB deployed in Application server
oracle.j2ee.clustering.ClusteringMessages warningInOpmnGetServers
Error in obtaining server list from OPMN on host 10.184.74.197:6204. Please verify that OPMN is running.
My Provider URL is
opmn:ormi://10.184.74.197:6007:home/S
Here 10.184.74.197 is the host name and 6007 is the OPMN requst Port and home is my OC4J instance
and S is the application name..
I have tired Googling... i cant even get the possible reason for the plm. Any help is greatly appreciated!!
Please Help me..

Hello Younis,
Please notice that it is impossible to diagnose an issue from a browser error. The internal error (HTTP-500 status code) is also recorded in your log files on the server. Please check the event_log in $ORACLE_HOME/webcache/logs and the error_log in $ORACLE_HOME/Apache/Apache/logs for further diagnostic information regarding the internal error.
Thanks,
EJ

Monitoring access ports with DFM

Hello,
I need to monitor access port for utilization and high broadcasts and errors on Catalyst switch.
I can easily change access port in device details of the switch to managed state and it detects the thresholds fine.
Problem comes when user turn off the PC. The port comes to operationally down status which appears as a critical error in DFM.
I don´t want to monitor up-down status of access ports, but I can´t find out how to turn it off.
Do you have any idea?
Thank you.

sistemas2.macae.rj.gov.br:82
That should work. I confirmed it on my server using http on port 84.
Are you sure that the server is working and you have access? When I tried the example you gave, I get access denied.

Trunk port vs Access port speed

I am setting up a 4900M for a temporary training class, for 1Gb connected client PCs. I used a 10Gb interface with an X2-10G-SR which will connect via 62.5 micron fiber, to a 4948 10Gb interface with an SFP-10Gb-SR. As for the config, I have the 4900M te1/1 setup as an access port to the 4948. The connectivity is fine, as is the routing. But when we use the client PCs disk connectivity (connecting to 10Gb storage) we get great read speeds but when it tries writing it slows down and eventually errors out.
Question 1: Would it make a difference if the 4900M was connected via a trunk port to the 4948?
I believe the issue is the length of the 62.5 fiber, and the maximum transmit\receive length of the transceivers, but I want to rule out the switchport configuration.

Thanks. You were correct, as changing the port configuration from access to trunk produced the same R/W speeds. The issue was with the fiber run being too long for the SR trancievers.

Error while accessing Oracle E-Business Suite 11i from Linux/firefox

error while accessing Oracle E-Business Suite 11i from Linux/firefox
OS: SUSE Linux Desktop 11(SLED11)
Web browser: firefox 3.x
Java versions:
# rpm -qa |grep java
java-1_6_0-sun-plugin-1.6.0.u18-0.1.1
java-1_6_0-sun-1.6.0.u18-0.1.1
# java -version
java version "1.6.0_18"
Java(TM) SE Runtime Environment (build 1.6.0_18-b07)
Java HotSpot(TM) Server VM (build 16.0-b13, mixed mode)
when I access the url firefox says
"Additional plugins are required to display all the media on this page"
then I clicked on "Install Missing Plugin" button
then I got the following message
No Suitable Plugins were found
Unknown Plugin (application/x-java-applet;jpi-version=1.4.1)
please help/suggest
Regards

Hi user;
Its not certified to login EBS from linux client
Please check:
Linux-cleint (ebs) certification
pluggins
Hope it helps
Regard
Helios

Error while accessing discver report

Hi,
I am getting error while accessing a shared report from my colleague.
1)Item "Project Overview Project Type" used by the workbook is missing. Would you like to continue
2)Item dependency "not found in the EUL. Attempt to open workbook failed.
Could you please give my the workaround for this.
Thanks

hi,
the link is:
Discoverer
Regards
Cosimo

Error while accessing secure store

Hi Team,
We are on EP 7.0 on SQL server 2005 . Iam facing one problem , in sometimemy IRJ pOrtal site stops giving error " Java iView Runtime " .At this time what happens that in my usr/sap drive , the sap folder is not shown as shared its share goes away and that time when i connect to visual admin tool the authentication fails and that time config tool gives error
#1.5#00188B417A01007E0160B338000008FC00045DE876A4C303#1229152911187#com.sap.engine.services.dbpool.spi.ManagedConnectionFactoryImpl##com.sap.engine.services.dbpool.spi.ManagedConnectionFactoryImpl#Guest#2####f168def0c8c411dd9a2100188b417a01#SAPEngine_Application_Thread[impl:3]_29##0#0#Error##Plain###ManagedConnectionFactoryImpl.createManagedConnection(): SQLException occured while creating ManagedConnection: com.sap.sql.log.OpenSQLException: Error while accessing secure store: File "
musaprd
sapmnt
PWC
SYS
global
security
data
SecStore.properties" does not exist although it should..#
#1.5#00188B417A010085015AAAF5000008FC00045DE876A4C207#1229152911187#com.sap.sql.connect.OpenSQLDataSourceImpl##com.sap.sql.connect.OpenSQLDataSourceImpl#Guest#2####09e36ed0c8c711dd93b200188b417a01#SAPEngine_Application_Thread[impl:3]_39##0#0#Error#1#/System/Database/sql/connect#Java#com.sap.sql_0019##Exception of type com.sap.sql.log.OpenSQLException caught: Error while accessing secure store: File
When i check in this path SecStore.properties is there , also i have checked the permissions .....................please revert the reason of this error .
Main part of this all is that after taking a reboot everything becomes fine , this happens every few days .
Please revert to this .
Regards,
Somya

Hi,
This error crops up when the the folder usr/sap folder sharing is lost . We have recently faced this problem this is Windows OS level problem you can ask your OS admin. Applying a security patch will do.
Regards,
Vamshi.

Error while accessing secure store: File "SecStore.properties" does not exi

Hi ,
I have a java desktop application, and i am trying to get a connection from a datasource deployed on one SAP AS Java, I can get the datasource succsfullly but when i try to get a connection from the DS, it throughs this exception, I put the secstore..properties file in the classpath even after that it is not happy,
any solution/hint/light please!!!!
com.sap.sql.log.OpenSQLException: Error while accessing secure store: File "SecStore.properties" does not exist although it should..
     at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:106)
     at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:145)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:226)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:197)
     at com.sap.customcode.ConflictingActionFixture.(ConflictingActionFixture.java:53)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
     at java.lang.reflect.Constructor.newInstance(Unknown Source)
     at java.lang.Class.newInstance0(Unknown Source)
     at java.lang.Class.newInstance(Unknown Source)
     at fit.FixtureClass.newInstance(Unknown Source)
     at fit.FixtureLoader.instantiateFixture(Unknown Source)
     at fit.FixtureLoader.instantiateFirstValidFixtureClass(Unknown Source)
     at fit.FixtureLoader.disgraceThenLoad(Unknown Source)
     at fit.Fixture.loadFixture(Unknown Source)
     at fit.Fixture.getLinkedFixtureWithArgs(Unknown Source)
     at fit.Fixture.doTables(Unknown Source)
     at fit.FitServer.process(Unknown Source)
     at fit.FitServer.run(Unknown Source)
     at fit.FitServer.main(Unknown Source)
Caused by: com.sap.security.core.server.secstorefs.FileMissingException: File "SecStore.properties" does not exist although it should.
     at com.sap.security.core.server.secstorefs.StorageHandler.openExistingStore(StorageHandler.java:372)
     at com.sap.security.core.server.secstorefs.SecStoreFS.openExistingStore(SecStoreFS.java:1946)
     at com.sap.sql.connect.OpenSQLConnectInfo.getStore(OpenSQLConnectInfo.java:802)
     at com.sap.sql.connect.OpenSQLConnectInfo.lookup(OpenSQLConnectInfo.java:783)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:209)
     ... 18 more
caused by

the SecStore.key file was not there, I changed the passwd and checked the 'Encryption' on, after that my sever instance is not starting.
Any idea?
-Puneet

Error while accessing a public method of applet from javascript.

Hi,
I am getting "Object doesn't support this property or method" error
when accessing a public method of applet from javascript in IE 6 using
document.applets[0].myMethod();
The same is working in IE 7.
Thanks in advance.
Regards,
Phanikanth

I don't know why it happens, but this works for me in both versions:
<applet ..... name="MyApplet">
</applet>and in javascript use
document.MyApplet.myMethod()

Unable to open pst file error details access to the path is denied

Hello,
iam trying to do a mailboximport-request from a QNAP-nas that is member of the domain.
When doing the mailboximport i am getting the following error : unable to open pst file error details access to the path is denied.
Which permissions do i need to have on the folder/file on the qnap to import the .pst-file?
Thx

Move your PST files to a windows server. Exchange Trusted Subsystem is a universal group in Active Directory.
Read more here: http://technet.microsoft.com/en-us/library/ee633455(v=exchg.141).aspx#Pre
Mike Crowley | MVP
My Blog --
Planet Technologies

Error in accessing port 2200

Similar Messages

Maybe you are looking for