Would MobiLink be the appropriate tool for syncing servers which collect near real-time data?

I have a situation which appears to be similar to the some MobiLink configurations, but with only a few large clients.In my case, there would be 5 to 10 remote clients (each with SQL Anywhere) and a central database. Administration and configuration would be done mostly from the central database, but each client also includes a near real time data collection application. The customer would like to have that data available in the consolidated database. In the worst case, there could be about 50MB of data received from each client in a burst each 15 minutes. Fortunately the consolidated site doesn't have a tight time constraint, its data could be up to 15-30 minutes behind. The clients don't need (or want) to see each other's collected data.
I would like to know if MobiLink would be a good choice for this situation. The only other viable alternative I've found so for is the keep the collected data at the remote clients and access it only on demand. And naturally, there's no money in the project for an enterprise level solution.
FYI: My company has on OEM license for SQL Anywhere.  We usually just have an application with SQL Anywhere at each site to collect data from the local equipment. This project is for a Fortune 500 company that want's to be able to monitor everything from the corporate office.
John

Hi John,
You should start writing down a few numbers including network speed and hardware specifications of client and server machines. In the worst scenario, you would have 15 clients synchronizing concurrently 750 MB of data in 15 minutes. And on top, there is your real time data collection application that could work while the synchronization is in progress.
You should also workout, how many connections to the consolidated database you will have in addition to Mobilink server and if these connections can create contentions.
The key factors influencing Mobilink performance are listed here DocCommentXchange
and you can tune the performance (more details in the link below)
DocCommentXchange
DocCommentXchange
Mirco

Similar Messages

  • Is LiveCycle Designer the appropriate tool

    Hello there,
    I am looking for a tool to take existing PDF forms (think goverment forms) and make some subtle formatting changes, and generate new forms.
    I plan to use fdf files to populate the form fields when rendering the pdfs from the forms.
    Is LiveCycle Designer the appropriate tools for this type of work?
    I am being lazy here. I do not want to recreate the entire pdf form. I would really like to take the existing pdf form and use it as the base to begin with. I want to add a couple of new form fields and then save it.
    I presume that LiveCycle Designer would do this.
    Thanks for any information.
    .......Cameron

    Hi Cameron,
    To add to Dallas's post, even if the pdf was created in some other program (and not flat) you will probably still have some difficulty adding content to it. Converting from FormFlow goes pretty well, converting from MS Word is hit and miss. Can you post one of your forms? It would be much easier to give you a good answer if we could see what you're dealing with.

  • VS.PHP vs PHP TOOLS for Visual Studio : which is the best ?

    Hi,
    I love Visual Studio. I use it since 2006 for c#, asp, WinForm project, etc. I have a question about PHP / Simple Web dev : 
    Which is the extention between VS.PHP and PHP TOOLS ?
    What i need :
    - Intellisence (auto completion all PHP core class and functions and major extention, project lib class and functions)
    - Powerfull debug, with break points etc...
    -Web server integartion (apache, nginx, mysql) 
    - Live edit over FTP
    - Publish over FTP the file projet
    - MySQL Integration (design tools, etc ?)
    [- Integration of some platform like Drupal or Wordpress (intellisence and debut)
    - Integartion with other HTML/Javascript framework (jquery, angular etc.) ]
    - CONTROL + K + D indentation for all documents
    Thanks for your opinion.

    Hi nicpulse,
    Thank you for posting in MSDN forum.
    Since this forum is to discuss: Visual Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation
    and Help System, and Visual Studio Editor.
    >>VS.PHP vs PHP TOOLS for Visual Studio : which is the best ?
    Based on your issue, since the PHP Tools and VS.PHP are involved to the Extensions tool,
    this extension tool is out of support range of this forum.
    In my option, I think that there have no specified answer about which is the best in the
    VS.PHP vs PHP TOOLS for Visual Studio.
    It is just depend on which is appropriate for your requirement, so I suggest you can see the feature about the VS.PHP and
    PHP Tools. And then choose which extension tool is appropriate your requirement.
    https://visualstudiogallery.msdn.microsoft.com/F5CFBE65-D843-4C96-8F24-2C169676504Chttps://visualstudiogallery.msdn.microsoft.com/6eb51f05-ef01-4513-ac83-4c5f50c95fb5
    In order to resolve your issue better, I suggest you post this issue to
    PHP Tools
    for Visual Studio or
    VS.Php for Visual Studio, click “Q AND A”, you will get better support there.
    Thanks for your understanding.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Is Dreamweaver an appropriate tool for creating a Help system?

    Hi,
    I have the full Adobe Creative Suite and I'm looking to create a Help system. Is Dreamweaver an appropriate tool for this, or is there another tool that would be better? I don't have Robohelp.
    Robyn

    Hi Robyn
    Robohelp and most of the other help systems would be like splitting a nut with a sledgehammer, for what you describe.
    You are basically talking about a search system on specific topics, for which Dreamweaver is an adequate tool, it may be worth while incorporating one of the 'smaller' open source help system into your site, in order to achieve your goal.
    Your comment on posting to the 'indesign' forum is understandable but not recommenced (there is a great difference between dtp (classic graphic design) and web design / development), especially if you intend to incorporate your current 'user guide' into a web site. Any help system both for a program that you install on your computer or supply as a web site 'help' system can be constructed as a searchable html page (many are html pages now), and you can even use the a major search engine to do this for you, (providing you know how, of course). It is even possible to search pdf's, flash and audio, and provide then as a downloadable / online version as well if you so require.
    The one thing you did not say in your reply was how good your programming skills are, (if not very good, do you have someone who can do this for you), as this is what will limit your help / search system. But even here if you incorporate one of the search engines own search api into a basic web page they will index and search your site for you, both as a local search, and as a web search.
    Hope this helps, in some way.
    PZ

  • Creating a step type "launcher" that would insert the appropriate built-in or custom step type at edit time

    Hi everybody,
    I'm looking for tips, pointers,directions... to be able to perform this operation in TS 4.0 sequence Editor, if it's even possible...
    I'm managing a test system with a "home-made" virtual instruments abstraction Layer complementary to IVI classes for instruments which do not have classes defined, customizing the sequence editor accordingly for developpers of my department.
    So basically when the instrument is IVI, the developper uses the built-in IVI step-type type and when it is not, he uses the the custom step types that I developped for this particular class of instruments.  
    However there are classes where I do have both IVI and specific drivers available and I do need to use both in the test sequence.
    For example let's say there are two sources of DC power available in the testbench, one being a programmable IVI compliant DC power supply, and the other one composed of fixed "blocks" of DC power supply managed by externals relays and you need to use them both in the test sequence.
    What I would like to be able to do in the sequence editor is inserting the appropriate step type at edit time just by selecting the source of power supply (by a ring or enum for eg), and if the first ressource is selected, it inserts IVI step type, and if the second ressource is chosen, it inserts the appropriate custom step type.
    Any Ideas on how to accomplish this ?
    Regards,
    Cyril
    Cyril Bouton
    Active LabVIEW Developper
    Solved!
    Go to Solution.

    Hello Cyril,
    Here is an idea that could be done:
    You could create a dynamic step by having a step that holds all the properties for both configurations (the superset of the necessary variables) and an extra one that indicates which 'mode' the step is in.  Then you create the main Edit substep in whichever language you desire.  That substep window will then have a box/dropdown/etc. at the top you can use to choose between modes A & B.  When the user changes the value, you would dynamically change the rest of the window to contain the appropriate properties for mode A or B.  You then copy the property values in that window to the Step properties, and copy the mode to your variable and you can run the step in that mode.  When the step then runs, it checks the mode variable, and depending on its value, it will run the step in mode A or B.
    Now we could add a dialog that allows us to choose when we put a step down but we should still allow the user to change later via the Edit substep we create.
    I don't think we can create something that inserts a completely different step, but we can have one step that has the ability to do both and we can pick which one we execute.  Also note we still don't have the ability to edit the Panels for a step, so we have to use a new window that we call from our Edit substep to complete the step.
    Hope this helps.
    Regards,
    Olivier L. | Certified LabVIEW Developer

  • Suggestions about the best tool for quality check for an ADF application

    Hi All,
    I need a few suggestions about the best tool for quality check in our ADF applicaiton.
    ours is a small size WebCenter Portal application which neither uses any task flows nor consumes any portlets.
    It has many jspx pages that use ADF components like table etc, consume web services using web service clients, and has some java classes.
    We have come across below option to implement the code quality tools.
    1. Jdeveloper inbuilt Staus option in View tab
    2. PMD extension for Jdeveloper
    3. Red Samurai
    Few more suggestions or best practices would be really helpful.
    Thanks,
    Usha

    Some general ADF / Webcenter coding standards -
    http://umeshagarwal24.blogspot.com/2012/06/adf-coding-standards-check-points.html
    You can use JAudit as well as mentioned in the blog.

  • The Best Tool For Multiple Animated Objects

    Hi,
    I am expirimenting with Flash Web Sites, and I would like suggestions as to a starting point for my project, and I am assuming a Flash website is where I would start.
    Basically, If I were to open up a web page, I would like to see multiple animated objects.  For example, if I were to simulate an Emergency Room, I would have an EKG displaying a heart rate, then perhaps see a breathing maching apparatus moving up and down, a Drip bag (sorry, don't know the real term), dripping into a patient's tube.  And of course, if I were to roll over an object it would animate, and if clicked on more animation or on to another page.
    I tried creating the animated objects in Fireworks, and I thought I could combine various Firworks files into one, but it didn't work (too many frames), either becasue I lack the knowlege of how to do this or simply it cannot be done that way in Fireworks.  I had a background with one animated flashing object (that was easy), but combining multiple independent objects, I could not figure it out.
    Someone suggested that I would have to use Action Scripts, which made me realize, I don't know the best way to accomplish my example above, and although I know I may be over my head, I would just like to get direction as to where I should begin.
    Should it all be in Flash in the first place?  To continue on with the example above, after a user clicks on the rollover image, a girney comes rolling in and we are giving choices on a monitor with what our next actions should be, which would take us into another page.  (this is just to give you perpective of what I am trying to accomplish).
    Should I create independent animated objects (files) in Fireworks, then somehow import them into their specified location in Flash.
    I hope this makes sense and I am hoping someone is kind enough to provide a starting point.
    Best.

    Flash is the best tool for what you want and most of it can be done once you get a handle on the basics.
    For you interactivity (rollOvers / triggering more animations with mouse) you will need some actionscript but don't get hung up on that now.
    There is a world of info out there. Google "animation basics in flash) you may have to weed through some garbage but you will find what you are looking for somewhere.

  • Is Business Manager the best tool for our company?

    I have a number of quesitons to answer to figure out if Busienss Manager is the best tool for our company. The ONLY reason we are pursuing changing from individual accounts is that Share Screen has been removed from some of our accounts with the latest Skype update.
    Can we port existing Skype account names to Business Manager?
    Will Skype contacts be kept?
    Is 'Share Screen' part of Business Man.?
    Is it east to add and delete user accounts in Business Manager?
    What are the admin issues?
    Can more than one person be the administrator? Is it easily transfered?
    The Business Manager literature refers to credit allocation, tracking and reporting as a benefit of Business manager. Credit is not a concern for our company as we seldom use Skype to call phones. What are the other benefits of Skype business Manager?
    Thank you for your time and help.

    Up until a few weeks ago I would certainly reccomend Skype, but my advice is for youy to look for another company.
    Skype doesn't care about it's business customers, I and others have been trying to buy credits for week but the system is broken with no fix in sight, I was told it would be fixed by the end of the week, it hasn't been!!
    Read for yourself then go look for another phone provider, Skype is not responsive to business customers!
    http://community.skype.com/t5/Skype-for-business/As-a-manager-I-am-unable-to-purchase-skype-credit/t...

  • Creator the right tool for applets?

    Hi.
    beeing new to Sun's Java Studio Creator I would like some opinions whether the Creator is the tool to use if use cases mainly focus on applets that get their data via WebServices.
    My main use case would be an applet with a tree-control showing a lot of machine tools and an area that displayes some charts. Charts would be rendered by a 3rd party component. The Applet should talk to a WebService exchanging XML-Data.
    I just don't know if Creator is the right tool for that.
    Many thanks in advance,
    Christian

    Hi.
    beeing new to Sun's Java Studio Creator I would like
    some opinions whether the Creator is the tool to use
    if use cases mainly focus on applets that get their
    data via WebServices.
    I just don't know if Creator is the right tool for
    that.
    Many thanks in advance,
    Christian<br><br>
    Personally, I would opt for Net Beans 5.0 beta 2 for this type of scenario. The IDE is much better suited for Swing and AWT type of applications. In addition, it has some impressive layout managers for Swing.
    <br><br>

  • Have a 3rd gen nano, when I plug in  I get "Podcasts on this IPOD cannot be synced because all of the podcasts selected for syncing no longer exist." I have no podcasts in my IPOD or queued in library. Help pls. Thx

    Wnen I plug in my IPOD, I gret the error message " Podcasts on this IPOD cannot be synced because all of the podcasts selected for syncing no longer exist. I have no podcasts in my IPOD or queued in I tunes at pfresent. When I did try to sync a current podcast, nothing happened although the podcasts did show in my library. I did play around with podcasts several months ago, but just listened to them on the computer, the IPOD was plugged in at times though, although not set up...thx

    Click here and follow the instructions.
    (27971)

  • Can I set up a new Mac Pro late 2013 using a Wacom Cintique 13HD tablet as the default monitor? How would I install the driver software for the tablet?

    Can I set up a new Mac Pro late 2013 using a Wacom Cintique 13HD tablet as the default monitor? How would I install the driver software for the tablet?

    The wacom site will have the drivers for you.
    http://us.wacom.com/en/support/drivers

  • What are the needed tools for JDBC???

    iam new to this field, i want to know what are the required tools for JDBC??
    i know that i need java.sql and javax.sql packages, but how can i get them???
    what about the drivers???
    thnx in advance

    You need to go to the vendor's web site such as Oracle and download the jar file for that particular database. Example: ojdbc14.jar for an oracle database and copy it to the 'lib' folder of your project and then include it with your project. Within that jar file, you will have datasource, preparedStatement, resultSet objects. You will need to read up on how to instansiate the datasource for that database from the vendor's documentation.

  • Is Dreamweaver the best tool for building HTML?

    Just wondering if Is Dreamweaver the best tool for building HTML? What are your thoughts?

    DW is an industry standard, pro-level software.  It can do as little or as much as your coding skills allow for. It supports modern X/HTML, CSS, JavaScript, XML, PHP, ASP & ColdFusion.
    Unlike plain text editors (NotePad), DW has powerful site management tools to assist you.  And it is very well supported by 3rd party extensions to enhance your productivity.  If you're serious about web development, you won't go wrong with DW .
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    http://alt-web.com/
    http://twitter.com/altweb

  • What is the best tools for analyzer VoIP

    I need ur help, i looking the tool helps analyzer VoIP in WAN/TDM. What is the best tool for Cisco System or wich recommends.
    Thxs!

    Hey turbot,
    Thanks for contacting National Instruments support.  Each set of the vis you mention are the latest, and some use similar methods to do the FFT than the other.  The SMT is usually the best in most applications.  There is also another option in the case of scope, you can fetch FFT data from the driver.  The FFT is not actually implemented in hardware, but in the driver, and this is transparent to the user.  It's simpler to use, but not as efficient as the SMT.
    I hop this answers your questions.  Let me know if I can be of further help.
    Regards,
    Kenn North
    Senior Product Manager - Search, Product Data
    http://ni.com/search

  • What are the best tools for converting .shg files to HTML image maps?

    After trying several different ways to import our WinHelp
    project into RH HTML, I'm left with recreating the project in HTML.
    There are over 200 .shg files. What's the best tool for converting
    them? Is there a free program that converts them? Or is there a
    better way?
    Lacona

    Yes, I have not been able to import the .hlp file, which was
    my last posted question/issue. I have tried creating a Microsoft
    HTML layout in RH4 Word; it begins to compile and, somewhere in the
    process, just freezes. I've tried importing the .hlp file into RH
    HTML; same result. I've tried creating a new HTML project with the
    .hlp file; same result. If I could import the file, it'd be great.
    Otherwise, I'll need to recreate the entire project, which brings
    me to converting the .shg files. Any ideas?

Maybe you are looking for