E-Rec_Error occurred in program CL_HRRCF_CANDIDATE============CM003 line 36

Helo Experts,
Can you help me in the below error message.
***No candidate could be found for
Error occurred in program CL_HRRCF_CANDIDATE============CM003 line 36***
This message is continuosly getting generated every minute when ever our Recruiters performing any transaction in E-Rec Portal.
We have checked in Backend the Object detials of these users. Everything is maintined in Relationships
-BP
-CP
-P
-S
-US
One morething is we also tested program CL_HRRCF_CANDIDATE by executing in the backend by passing all the parameters like BP,CP,P and US, but this class is not generating any error.
Is there any updation or TREX Indexing issue?
Pls advise me with your experiences.
Thanks
Gita

Hello,
There are about 2 or 3 Notes which are available - 1430713 & 1498162 depending on your SP level.I imported the notes also but I am still getting the error. I was actually planning to raise an OSS message for this because I really could not find where the error is not coming from.
Regards,

Similar Messages

Runtime Error in MMBE- s yntax error occurred in program "SAPLMBBS " in inc

Hi Gurus,
Runtime Error in "MMBE" Transaction -
The following syntax error occurred in program "SAPLMBBS " in include "LMBBSU07
" in
line 76:
"The column name "MATNR" has two meanings . ."
Any Input is Highly appreciated.
Thanks and Regards,
Selva

Hi,
This looks like an ABAP runtime error and the program concerned is a standard program. Please check the include and try debugging, suggest a breakpoint in line 76.
Thanks

Syntax Error occured in Program in include " CNTN01

Hi,
We are working on SAP 4.6C to ECC 6.0 Migration. While testing One Transaction, I am getting following error:
The current ABAP program "CL_GOS_TOOLBOX_MODEL==========CP" had to be
terminated because it has come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"Z3I_CL_BASCULER_SCS_GOS=======CP " in include "<CNTN01> " in
line 13:
"Within classes and interfaces, you can only use "TYPE" to refer to ABA"
"P Dictionary types, not "LIKE" or "STRUCTURE"."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
This Error is coming while executing transaction in ECC 6.0 however in R/3 4.6C it is working fine.
Pls Advice what should be done to resolve this issue. This issue is coing in alot of transactions.
I will appreciate if anyone of you can guide me regarding same.
regards
Sandeep

Hi,
I was trying hand on one of my Z class which contain include <CNTN01>. in its Local Types.
I commented the existing include statement and added new statement as
INCLUDE CNTN01_OO.
After saving now when i try to activate the Z Class, it is giving me following error:
INCLUDE CNTN01_OO
You can only define classes and interfaces at the highest level of CLASS-POOL.
CLASS Z5C_CL_MESSAGE, Internal classes in a class include "CNTN01_OO" does not start with the prefix (Z5C_CL_MESSAGE=======)of the current class pool.
pls advice what i should do correct this issue.
Sandeep

Error installing Azure SDK 2.2: An error occurred while parsing Entityname. Line 1031, position 71.

I am setting up a new machine for windows azure development. I have VS 2013 Ultimate with Team Explorer on Windows 7 Enterprise. When I launch the Web Installer for Azure SDK 2.2 I receive a dialog almost immediately with the message:
An error occurred while parsing EntityName. Line 1031, position 71.
I ran the same installer on another machine with similar configuration of VS2013 and Win 7, and it doesn't display this dialog.
Any help/guidance is appreciated.

Hi,
Based on your description, you install Azure SDK successful in a similar configuration machine, but it give "An error occurred while parsing EntityName. Line 1031, position 71" error in your target machine, from my research, this may be Microsoft
server-side error, refer to
http://stackoverflow.com/questions/14964634/wpi-4-5-error-after-upgrading fro more details. I would suggest you reinstall, if any further issue, please feel free to let e know.
Best Regards
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Dynamic Programming - RTTC - Appending lines

I give up! Maybe someone else can help me with this Dynamic Programming problem.
I am using RTTC to create an itab. Now I want to append lines and for some reason can't seem to crack the syntax I need.
My latest attempt looks like this...
            FIELD-SYMBOLS: <table> TYPE ANY TABLE,
                           <row> TYPE ANY.
            lo_sdescr      = cl_abap_structdescr=>create( lt_components ).
            lo_tdescr      = cl_abap_tabledescr=>create( lo_sdescr ).
            CREATE DATA lr_alloc->alloc_table TYPE HANDLE lo_tdescr.
            CREATE DATA lr_struct TYPE HANDLE lo_rdescr.
            ASSIGN lr_alloc->alloc_table->* TO <table>.
            APPEND INITIAL LINE TO <table> ASSIGNING <row>.
The syntax check I get on the APPEND statement is "You cannot use explicit or implicit index operations on tables with type "ANY TABLE".
All the doco and examples I can find use a simple "SELECT * ... INTO CORRESPONDING FIELDS OF TABLE <table>" syntax which it not what I need to do.
Any help it appreciated.
Thanks
Graham Robbo

Hello Graham
The solution is quite simple (at least to overcome your syntax error):
FIELD-SYMBOLS:
<gt_itab>     TYPE STANDARD TABLE, " use STANDARD instead of ANY
<gs_struc>    TYPE ANY.
*& Report Z_RTTI_CREATE_COMPLEX_ITAB
*& NOTE: revised version of ZUS_SDN_RTTI_CREATE_STRUCTURES
*& Thread: Dynamic Programming - RTTC - Appending lines
*& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="980407"></a>
REPORT z_rtti_create_complex_itab.
TYPE-POOLS: abap.
DATA:
celltab          TYPE lvc_t_styl. " becomes field of complex itab
DATA:
gd_tabnam        TYPE string,
gd_tabfield      TYPE string,
go_table         TYPE REF TO cl_salv_table,
go_sdescr        TYPE REF TO cl_abap_structdescr,
go_sdescr_new    TYPE REF TO cl_abap_structdescr,
go_tdescr        TYPE REF TO cl_abap_tabledescr,
gdo_data         TYPE REF TO data,
gdo_handle       TYPE REF TO data,
gs_component     TYPE abap_compdescr,
gs_comp          TYPE abap_componentdescr,
gt_components    TYPE abap_component_tab.
FIELD-SYMBOLS:
<gt_itab>     TYPE STANDARD TABLE,
<gs_struc>    TYPE ANY.
PARAMETER:
p_tabnam      TYPE tabname DEFAULT 'KNB1'.
START-OF-SELECTION.
" Describe structure
go_sdescr ?= cl_abap_structdescr=>describe_by_name( p_tabnam ).
gd_tabnam     = go_sdescr->get_relative_name( ).
" Simulate dynamic addition of columns
LOOP AT go_sdescr->components INTO gs_component.
    "   Build fieldname
    CONCATENATE gd_tabnam gs_component-name INTO gd_tabfield
                                            SEPARATED BY '-'.
    CLEAR: gs_comp.
    gs_comp-type ?= cl_abap_datadescr=>describe_by_name( gd_tabfield ).
    gs_comp-name = gs_component-name.
    APPEND gs_comp TO gt_components.
ENDLOOP.
"   Create instances of dynamic structure and dynamic internal table
go_sdescr_new = cl_abap_structdescr=>create( gt_components ).
go_tdescr      = cl_abap_tabledescr=>create( go_sdescr_new ).
"   Create data refence followed by table creation
CREATE DATA gdo_handle TYPE HANDLE go_sdescr_new.
ASSIGN gdo_handle->* TO <gs_struc>.
CREATE DATA gdo_handle TYPE HANDLE go_tdescr. " !!!
ASSIGN gdo_handle->* TO <gt_itab>.
APPEND INITIAL LINE TO <gt_itab> ASSIGNING <gs_struc>.
TRY.
      CALL METHOD cl_salv_table=>factory
        IMPORTING
          r_salv_table = go_table
        CHANGING
          t_table      = <gt_itab>.
      go_table->display( ).
    CATCH cx_salv_msg .
ENDTRY.
END-OF-SELECTION.
Regards
Uwe

Loadjava puts the whole program on one line

Hi,
I have used the loadjava facility standalone and within Oracle9i jDeveloper and found that when I upload the java source, it puts the whole program on one line. Also if I have left blank lines in the source code, they appear as 'null' in the stored procedure.
See below is my code:
package mypackage1;
public class HelloWorld
   public static String world ()
      return "Hello world";
}and this is what it looks like if I open the Java classes in jDeveloper:
package mypackage1;nullpublic class HelloWorld{   public static String world ()   {      return "Hello world";   }}nullI am using a windoes 2000 box.
Why is this happening?
Thanks
Jag

Thanks, i'll try it out,
However, it isn't just the code that appears on one line. All teh functions and packages all appear on one line and they are generated either by JDev and hence are out of my control.
You would have thought that this would have been one of the types of things the JDeveloper development team would have tested, so i'm hoping it just a configuration somewhere.
Thanks
Jag

How can I run my program on command line?

I'm having some trouble trying to run my program on command line.
I get a message saying "Exception in thread
"main" java.lang.NoClassDefFoundError: Rectangle
<a href="http://img145.imageshack.us/my.php?image=untitled2copylh2.jpg" target="_blank"><img src="http://img145.imageshack.us/img145/3002/untitled2copylh2.th.jpg" border="0" alt="Free Image Hosting at www.ImageShack.us" /></a>
import java.util.Scanner;
public class Rectangle
public static void main(String[] args)
int width;
int height;
int count = 1;
Scanner scan = new Scanner (System.in);
System.out.println("Please enter the width of the rectangle: ");
width = scan.nextInt();
System.out.println("Please enter the height of the rectangle: ");
height = scan.nextInt();
while (count <= width)
if(width < 1 || width > 30)
throw new IllegalArgumentException("The numbers must be in range");
if(height < 1 || height > 30)
throw new IllegalArgumentException("The numbers must be in range");
for (int star = 1; star <= height; star++)
System.out.print("*");
System.out.println();
count++;
}

What doesn't work?
When you type javac Rectangle.java do you get error messages? Does it create the file Rectangle.class? If yes, type java Rectangle and your program should run. If you get an error post it but if you followed earlier advice you should be able to solve the problem yourself.

An error occurred while parsing EntityName. Line 1, position 3224

Hi all...
We are implementing a SAP standard solution as per NOTE 1003730
we are facing problem while transferring data to Government Gateway and error generated as
"An error occurred while parsing EntityName. Line 1, position 3224"
tried counting the posiitons in payload....could get any luck....
any inputs around this will be of gr8 help.
Full error text as follows:
- <GovTalkErrors>
- <Error>
<RaisedBy>System</RaisedBy>
<Number>1001</Number>
<Type>fatal</Type>
<Text>An error occurred while parsing EntityName. Line 1, position 3224.</Text>
<Location />
</Error>
</GovTalkErrors>
Regards.

Hi,
Could tell us what EntityName's value is ? Or what's at this char position ?
Rgds
Chris

The following syntax error occurred during parsing: Invalid token, Line 1,

Hello Experts,
I hope someone could help me. I am trying to create a MDX formula in Account dimension (Cuenta).
When formula created use "Iif" syntax, system give the following error:
- [CUENTA].[H1].[#X000] Parser: The following syntax error occurred during parsing: Invalid token, Line 1, Offset 15, [.
My Account dimension (Cuenta) has 3 parent, and the formula introduces is:
'Iif([Cuenta].[H1].[BLOQ_FASEC]<0.5 and [Cuenta].[H1].[BLOQ_FASEC]>-0.5,0,[Cuenta].[H1].[BLOQ_FASEC])
We try another syntax
'Iif([Cuenta].[BLOQ_FASEC]<0.5 and [Cuenta].[BLOQ_FASEC]>-0.5,0,[Cuenta].[BLOQ_FASEC])
But same error persist.
Could you have any idea?
Thanks

Can you check into dimension properties what is the size of FORMULA propertiy?
Make sure is bigger than number of chars from your formula.
Do you have multiple hierarchies for CUENTA?
The formula which you mentioned it has to be into column: FORMULAH1.
Also make sure that your formula doesn't have an end of line at the end. That can cause again problems.
Regards
Sorin Radulescu
Edited by: Sorin Radulescu on Apr 22, 2010 11:03 AM

Executing another program with command line arguments

I am very new to Java, so bare with me.
I have written an encryption/decryption program in C (that accepts command line arguments of the key, mode (encrypt/decrypt), and file), and I have written a GUI for it in Java. It accepts the filename (and has a button which opens the "File/Open" dialog), key, and mode, and has a button to Start the process of the encryption. I'd like for that "Start" button to call my encryption program in C (eep.exe) with the command line arguments of the file, key, and mode. This is what I have written so far :
Start = new JButton("Start");
Start.setBounds(150, 180, 90, 25);
Start.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent ae) {
Desktop.open(new File("C:\\eep.exe" + " " + filename + " " + mode + " " + key));
However, I get the error "Cannot make a static reference to the non-static method open(File) from the type Desktop" on the Desktop.open command.
What should I do? Is Desktop.Open the right way to go about this? If not, what is the right way to go about it?
Thanks in advance.

That has helped greatly, but I cannot pass command line arguments to it.
Using :
try {
    Desktop.getDesktop().open(new File("C:\\eep.exe"));
catch (Exception e) {
   System.out.println("Error executing.");
}I can execute eep.exe, but when I try to pass command line arguments to it, such as
Desktop.getDesktop().open(new File("C:\\eep.exe" + " " + filename));it fails, get caught and prints "Error Executing."
I have also tried loading the program, as well as some command line arguments into an array of strings :
String[] cmdArray = {"C:\\eep.exe", filename};
Desktop.getDesktop().open(new File(cmdArray));But it gives me the error "The constructor File(String[]) is undefined" on the
new File (cmdArray)part of the command.

Run a program without command line

Hello,
I was wondering if there was a way to run a java program without compiling the code and giving the 'java' command at the command prompt.
For example, I want to put my program on a cd with all the necessary components for it to run on any windows system, regardless of whether there is any java technology already on the machine.
Thanks

Batchfile, look it up on google, its pretty self explanatory. um, I'll try to explain the basics......
Ok, to create your own batch file, open notepad and then save the file with .bat instead of .txt
A batch File is a series of system commands, so, for example, if you wanted your batch to run a file located at c:\temp, the first line of your batch file should just have word.exe c:\temp\filenamehere.doc, for example, this is a line from a batchfile I made:
excel.exe g:\tmp\Andy_Test.xls
a batch file can contain many commands and they will all execute sequentially.
if you want to open your program from a cd, I would think, although I have never done it, that you should
make a batch file that reads something like:
"D:\foldername\filename"
or i guess you could simply do it on c drive like this if your java program was poop.java
"c:\myfolder\myfolder2\myfolder3\java poop"
you couild even compile it before you run it
"c:\myfolder\myfolder2\myfolder3\javac poop.java"
"c:\myfolder\myfolder2\myfolder3\java poop"
also, if your java app is a GUI, I would run it like this:
"c:\myfolder\myfolder2\myfolder3\javaw poop"
Go here to learn more about batch programming, I actually don't know that much about it.
http://www.computerhope.com/batch.htm

Need script or Program to count lines of source code

Hello, I need a script or a program that can count how many lines are there in a directory contains source code as well as other directories(contain code as well), there are .java files in these directories, the script or program should count number of lines with/without comments(starts with // or surrounded by /**/)
Thanks a lot!!!

I wrote a quick python program to count the lines in a file, you could just adapt it to your needs, or use the second program I have in this post that condenses all the .java files in a directory into a single text file, which you can then use a line-count on (useful if you need to print it as well - I wrote it for my IB dossier java project), if you'd like a proper script for your needs, otherwise check the other suggestions.
Run it by copying the code into a text file and saying it as script.py (change script to whatever you want) and running it with python /path/to/script.py
#!/usr/bin/env python
#Program to tally the lines in a file
#Author: lswest
import os
home=os.path.expanduser("~")
endPath=raw_input("Path to file relative to your home directory (include file name and extension): ")
count=0
ff=open(os.path.join(home, endPath))
for x in ff:
count+=1
values={'name': os.path.join(home,endPath), 'count' : count}
print "The file %(name)s contains %(count)s lines." % values
#!/usr/bin/env python
#Script to condense the multiple files of a project into one for easy printing/copying
#Author: lswest
import os
home=os.path.expanduser("~")
endPath=raw_input("Path relative to your home directory to the project folder: ")
extension=raw_input("Extension of files you want to condense: ")
outPath=raw_input("Path to output file relative to home directory: ")
outFile=raw_input("Output file name (including extension): ")
ff=open(os.path.join(home+outPath,outFile), "wt")
for root, dirs, files in os.walk(os.path.join(home,endPath), "true", "none", "true"):
for infile in [f for f in files if f.endswith(extension)]:
fh=open(os.path.abspath(os.path.join(root,infile)))
for line in fh:
ff.write(line,)
fh.close()
ff.close()
Last edited by lswest (2009-03-10 16:23:52)

How to create a program shortcut (command line, not icon)

Hi,
I installed a program from source, it's a biological structure modeling software. How can I make a shortcut so that I just type in the name of the program to get it to start? Thanks!

There are two ways of doing it, depending on what you want to accomplish. Both require that you edit the file ~/.bashrc (I assume you use bash)
1) If the application places all the executable files in a given directory (let's say /opt/Application/bin/), you can access all those executables directly by simply telling your shell where to look (in the same way the shell automatically looks for executable files in eg. /usr/bin). In ~/.bashrc, you would have to add a line that looks like this:
PATH="$PATH:/opt/Application/bin"
2) If you just want to make a traditional "shortcut" that executes a given command, this can be done with alias. Add this command to your ~/.bashrc:
alias shortcut="some command"
In this case, typing shortcut into a terminal will be interpreted just like if you had typed some command instead.
In order to try out these changes, either restart your terminal or run this command:
source ~/.bashrc
[EDIT]
I was obviously beaten to it
Last edited by Peanut (2009-05-26 23:12:47)

I would like to find a program to draw lines, shapes and words for my iMac.

If anyone can help me find a program or App for my iMac that lets me draw lines, shapes and letters.
Thank You
Sandy

http://www.sketchup.com/
Try this it is a free download and it is a great program. I almost feel guilty not paying anything:)

Running program via command-line

I've using NetBeans IDE 5.5 and to run my projects, I simply click the "Run" button and everything goes fine. When I build the project, it says this:init:
deps-jar:
compile:
To run this application from the command line without Ant, try:
java -jar "/home/tristan/Java Programs/CalendarProgram/dist/CalendarProgram.jar"
jar:
BUILD SUCCESSFUL (total time: 1 second)I try that and I get:[tristan@tristan ~]$ java -jar "/home/tristan/Java Programs/CalendarProgram/dist /CalendarProgram.jar"
Exception in thread "main" java.lang.UnsupportedClassVersionError: UserInterface (Unsupported major.minor version 50.0)
        at java.lang.ClassLoader.defineClass0(Native Method)
        at java.lang.ClassLoader.defineClass(Unknown Source)
        at java.security.SecureClassLoader.defineClass(Unknown Source)
        at java.net.URLClassLoader.defineClass(Unknown Source)
        at java.net.URLClassLoader.access$100(Unknown Source)
        at java.net.URLClassLoader$1.run(Unknown Source)
        at java.security.AccessController.doPrivileged(Native Method)
        at java.net.URLClassLoader.findClass(Unknown Source)
        at java.lang.ClassLoader.loadClass(Unknown Source)
        at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
        at java.lang.ClassLoader.loadClass(Unknown Source)
        at java.lang.ClassLoader.loadClassInternal(Unknown Source)This happens on both my Fedora Core 5 and Windows XP machines. Maybe I'm just oblivious to the problem, but if it's giving me that argument to run, why won't it work but works when I click "Run" in NetBeans?

Alriight. Well, when I type in java -version. It says I have 1.4.2 and NetBeans uses 1.6. I have no idea where 1.4.2 is installed (Linux), but since I'm compiling it with 1.6, does that mean no one else can run the program unless they have 1.6 on their machine?

E-Rec_Error occurred in program CL_HRRCF_CANDIDATE============CM003 line 36

Similar Messages

Maybe you are looking for