WP8.1 MDM Restrictions - Voice record and safe search not working as expected

Hi
I'm having some issues with the new restrictions -
Voice recording
After setting Experience/AllowVoiceRecording to 0, voice recording no longer works as expected in the Nokia recorder app, however you can still voice record from other apps such as One note. Is this expected or should this restriction be applied at
OS level?
Safe search level
Setting Search/SafeSearchPermissions to 0 or 1 causes the UI in settings > search for the level to be greyed out and states that it is disabled - but it does not show the correct level set. It seems this restriction is not working or the values
I am using are incorrect.
Thanks
Scott

Hi Scott,
I was checking the documentation and it seems vague. However, I have a few thoughts...
Are you running this as PolicyManager/My/<Area>/<policy name> or PolicyManager/Device/<Area>/<policy name>? In Windows Phone 8.1, the PolicyManager configuration service provider is new. "My" path handles the policy configuration
request coming from the server and "Device" is a read only path to reflect the plicy values that are enforced at the device.
I would check to insure that you've set it up in the correct area. To troubleshoot, you could also try setting it up in either the opposite area and/or both areas.
I hope this helps!
David

Similar Messages

Command-delete, command-left and command-right not working as expected

On a Mac (in my case OS X 10.6.8) when entering text into a text-field or text-box 'command-delete' in any other application deletes everything between the cursor and the beginning of the current line. I'm using Firefox 10.0.1 and this does not work.
Also, in certain rich text editors such as Gmail's compose mail text-box 'command-left' and 'command-right' which would usually jump to the respective beginning or end of the current line doesn't seem to work.

Try:
Create Table ImportLog
( recid int,
grouploadid int,
groupid int,
tablename varchar(128),
note varchar(500)
Insert Into ImportLog
Values
(1,216,1,'tableb','noteb'),
(2,217,1,'tablea','notea'),
(3,217,2,'tableb','noteb'),
(4,217,1,'tablea','notea'),
(5,230,1,'tableb','noteb'),
(6,244,1,'tablea','notea'),
(7,244,2,'tableb','noteb'),
(8,244,3,'tablec','notec'),
(9,217,3,'tabled','noted')
select r1.RecID, r1.GroupLoadID, r1.groupid, r1.tablename, r1.note,
r2.RecID, r2.GroupLoadID, r2.groupid, r2.tablename, r2.note
from ImportLog r1
full join
(select RecID, GroupLoadID, groupid, tablename, note
from ImportLog
where GroupLoadID = '217'
) r2
on r1.TableName = r2.TableName and r1.Note = r2.Note and r1.Groupid = r2.Groupid
where r1.GroupLoadID = '244'
order by 1
GO
DROP Table ImportLog
GO
RecID GroupLoadID groupid tablename note RecID GroupLoadID groupid tablename note
6 244 1 tablea notea 2 217 1 tablea notea
6 244 1 tablea notea 4 217 1 tablea notea
7 244 2 tableb noteb 3 217 2 tableb noteb
8 244 3 tablec notec NULL NULL NULL NULL NULL
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014

Find and item Search not working inside custom list in sharepoint 2013

HI,
In Sharepoint 2013 , i configured the Search. it is working in home page search Box and Find item search box inside custom list as well But one particualr custom list Find an item is not working. Any clue ?Thanks in Advance
Thanks
sanjay pradhan

Hi,
According to your description, my understanding is “find an item” search box in a custom list not work in your environment.
As search box and “find an item” search box in your home page are working, so the search service application is working.
Do you have any customzation to the particular custom list ?
If No, I suggest you can full crawl the data in Central Administration ->Manage Service Application->” Search Service Application”-> Manage Content Sources” to test if it works.
Also, please check if you have set "Allow items from this list to appear in search results" in list settings->Advanced Setting to true
Best Regards
Jerry Guo
TechNet Community Support

Wiki pages and document Search not working

Hi All,
I have lot of wiki pages and Documents in my site collection , I try to search those but its not working .
I tried to fix this issue .
I create a new search service application , and new content source with my new SharePoint site and start the continuous crawl.
after I create a new sup site as enterprise search center in my existing site collection , than I try to search my documents and wiki pages , but nothing is shown on my results , but I can see all other documents and wiki pages (its all posted in different
web application with site collections) because am the owner of all site collections , I got below error when I try to check the crawl logs in my new content source, please see the below log and let me know what I have to do now.
This item could not be crawled because the repository did not respond within the specified timeout period. Try to crawl the repository at a later time, or increase the timeout value on the Proxy and Timeout page in search administration. You might
also want to crawl this repository during off-peak usage times.
Thanks,
Mani L
Mani L

did you refer this http://social.technet.microsoft.com/Forums/sharepoint/en-US/48e2e783-e3b3-4586-bdb4-8c662c35908a/sharepoint-2010-search-error?forum=sharepointadminprevious
Are you using any AAM configureation ? If you check wiki age with absolute URL in crwal logs then what is the result ?
Regards,
Pratik Vyas | SharePoint Consultant |
http://sharepointpratik.blogspot.com
Posting is provided AS IS with no warranties, and confers no rights
Please remember to click Mark As Answer if a post solves your problem or
Vote As Helpful if it was useful.

HT3562 voice over and hindi script not working

sometimes suddenly hindi script is not working on voice over command. are there any command to enable or disable to read out or not read out hindi letters in iphone?

In that case, lines like this:
this.getField("Page1_Player_Level").value = 0
should be:
event.value = 0;
And at the beginning, I'd suggest doing this:
// Get the field value
var v = getField("Page1_Experience_Actual").value;
// Set this field's value based on the value of the input
if (v == "") {
event.value = 0;
} else if (v > 0 && v <= 99) {
event.value = 1;
} // etc.
to make the code easier to maintain and decrease its size.
If you're still having problems, check the JavaScript console (Ctrl+J) to see if any errors are reported.

Spotlight and mail searches not working, but...

I contacted Apple Support by phone and they had me go through all of the procedures to re-index the meta data and so on on my iMac and still my Spotlight and Mail searches are not working properly. (I cannot find certain files even though I know they exist...more often than not!) Supposedly, when I "forced" a re-index operation by going to Spotlight Preferences and changing Privacy settings for the entire hard disk and then changing them back, the Spotlight icon on the top right of the menubar was supposed to indicate that re-indexing was taking place, but that never happened. It seems that I possibly have a corrupt metadata file which just won't re-index, or some kind of permission changed which doesn't allow re-indexing to happen, or SOMETHING like that.
Is there a singular hidden "index" or metadata file on the Mac under Lion where this information is stored, can I get at it so I can trash it, and if I do, will the computer automatically rebuild a new index file (if such a singular file even exists)?
I asked this question at a semi-local Apple Store Genius Bar as well, and they were scratching their heads. I have not yet brought the machine in to the store --- if I can avoid that lengthy step, I'd much prefer to fix this here in my office. (The machine works fine otherwise, and I need it here all the time, it's just that searching doesn't work)
I have also tried a re-install over the existing OS (leaving all my apps and documents in place), but have not tried a complete erase-and-install installation. I have a complete Time Machine backup of the entire drive, but the question remains...if I use Apple Migration Assistant to bring the apps and documents back in from Time Machine after doing a "clean" install on a wiped-clean hard drive, won't Time Machine also restore the old metadata that I suspect is corrupt? If so, how would I go about restoring all of my apps and documents without the use of the Migration Assistant or the Time Machine backup file (which may contain a corrupt index file)? If I do a hard drive clone with one of the available utilities dedicated to that purpose, how do I restore JUST the things I need (including serial numbers, etc) without risk of bringing over "bad" index files?
By the way, this machine was running Snow Leopard for well over a year before I upgraded to Lion, with no searching problems whatsoever.
Thanks for any help that anyone might be able to provide. I know I ask a lot of questions, but I don't want to go through the lengthy cloning of my hard drive and then doing a "clean" install and then be saddled with the same problem again.

Hi Linc,
I was able to get some text to appear by choosing "All Messages" from the Error Log list. Here's what I got when i filtered "mdworker" (I have indicated where I removed repetitions):
3/14/12 9:24:10.617 PM
com.apple.mdworker.isolation.0
failed to parse embedded CMap.
3/14/12 9:24:10.617 PM
com.apple.mdworker.isolation.0
syntax error, unexpected DICTSTART.
[about a dozen instances of the above two lines were removed]
3/14/12 9:24:10.622 PM
com.apple.mdworker.isolation.0
*** process 2211 exceeded 500 log message per second limit - remaining messages this second discarded ***
3/14/12 9:24:26.203 PM
com.apple.mdworker.isolation.0
Range {0x0000, 0xFFFF} is not 1-dimensional; handling as a special case.
[Five instances of the above line were removed]
3/14/12 9:24:55.603 PM
mdworker
Unexpected EOF, returning last token as fallback
3/20/12 3:54:30.197 PM
mdworker32
kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
3/20/12 3:54:30.735 PM
com.apple.mdworker.isolation.0
Range {0x0000, 0xFFFF} is not 1-dimensional; handling as a special case.
3/20/12 3:54:30.736 PM
com.apple.mdworker.isolation.0
Range {0x0000, 0xFFFF} is not 1-dimensional; handling as a special case.
3/20/12 3:54:30.736 PM
com.apple.mdworker.isolation.0
Range {0x0000, 0xFFFF} is not 1-dimensional; handling as a special case.
And here is what I got when I filtered using "mds" (since these are all at different times, I didn't remove duplicates):
3/14/12 9:35:35.672 PM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/14/12 10:45:54.051 PM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/14/12 11:45:55.907 PM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/15/12 12:45:53.271 AM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/15/12 1:45:52.702 AM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/15/12 2:45:52.837 AM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/15/12 3:45:52.046 AM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/15/12 4:45:51.586 AM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/15/12 5:45:51.996 AM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/15/12 6:45:52.049 AM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/15/12 7:45:51.647 AM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/15/12 8:46:05.149 AM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/15/12 1:27:56.526 PM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/15/12 2:25:20.942 PM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/15/12 3:26:14.623 PM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/15/12 4:26:06.091 PM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/15/12 5:26:29.923 PM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/15/12 9:48:38.902 PM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/15/12 10:15:02.995 PM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/16/12 7:55:44.632 AM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/16/12 8:07:28.002 AM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/16/12 4:28:06.236 PM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/16/12 4:31:05.891 PM
mds
(Error) LSOF: File '/Volumes/CAROLLE' (fd=15) left open on device 234881032
3/19/12 5:19:52.696 PM
mds
(Normal) FMW: FMW 0 0
3/19/12 5:19:52.704 PM
mds
(Error) Volume: Root store set to FSOnly with matching create! (loaded:1)
3/19/12 5:19:59.291 PM
mds
(Warning) Server: No stores registered for metascope "kMDQueryScopeComputerIndexed"
3/19/12 5:20:31.340 PM
imagent
[Warning] Creating empty account: Default for service: IMDService (SubNet)
3/19/12 6:29:40.573 PM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/19/12 9:15:43.527 PM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/19/12 9:17:32.723 PM
mds
(Error) LSOF: File '/Volumes/CHUBER' (fd=22) left open on device 234881032
3/19/12 9:39:28.149 PM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/19/12 10:43:40.855 PM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/20/12 7:22:42.424 AM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/20/12 9:46:04.479 AM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/20/12 3:54:42.852 PM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/20/12 4:23:54.016 PM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/20/12 5:23:56.550 PM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/20/12 9:18:16.565 PM
mds
(Error) Volume: Could not find requested backup type:2 for volume
I hope some of this information is useful in solving my problem. Thanks in advance for your help!

Read Key and Write Key not working as expected with paths on RT

The configuration file VIs Read Key (Path) and Write Key (Path) don't seem to work as expected (at least not as I was expecting them to) on an RT target.
When working on my WinXP PC with these two VIs, paths are translated to what looks like is supposed to be a device-independent format before being written to disk. The path C:\dir\file.txt becomes /C/dir/file.txt when writing and vice versa when reading. On my RT target, however, that same path is written to disk as C:\dir\file.txt, unchanged from the native format.
The translaton of a native path to and from the device-independent format appears to be the responsibility of Specific Path to Common Path and Common Path to Specific Path. These both use the App.TargetOS property to determine the operating system. In the case structure for these two VIs, however, there is no case for PharLap or RTX. (My RT hardware is runnng PharLap; I don't know enough about RTX to comment.) This means that the results of String to Path or Path to String are used without translating between the device-independent format to the native path format.
This isn't a problem if you create a configuration file on one machine and use it on that same machine. I noticed this only when tranferring a config file from my PC to the RT target, where the target would not open the file paths it loaded from the configuration file.
This occurs on 7.1.1 and 8.0. I don't have 8.20 to see if happens there, too.

In LV 8.2, this was fixed.
The problem is App.TargetOS returns "Pharlap" on RT systems, and "Pharlap" is handled by the default case ("invalid OS target") in LV 8.0. In LV 8.2 the default case is "Windows 95/NT", however. The reason you could write and read an .ini file on RT in LV 8.0 and earlier is because these two VIs (listed below) were both running the default case of "invalid OS target".
vi.lib\Utility\config.llb\Common Path to Specific Path.vi
vi.lib\Utility\config.llb\Specific Path to Common Path.vi
As you saw, this fails when you perform one operation in Pharlap but the other in Windows. You can fix this by modifying the two VIs listed above. Just go to the case structure and make "Windows 95/NT" the default case.

Server 2012 R2 user profile disks and outlook search not working

Hi,
I`m having a problem with my setup for quite some time now with Windows Search and indexing the outlook OST files.
I`m using user profile disks in my setup but it seems that Windows Search can`t index the user profile disks, hence when i`m searching in outlook (the OST file is located in the user profile disk) with windows search enabled i`m not getting any results because
it can`t index the OST file.
If I don`t use the disks then windows search works fine but because i`m using clustered TS servers I need the profile disks and I don`t want to go back to redirects if possible..
At the moment I`ve disabled Windows Search which forces outlook to search online, it works but is slow..

Next issue that popped up, after the user logs off it will deleted the indexed data and start over the next time the user logs on..
Any fix for that?
There are three other Technet threads describing the same exact problem about indexing data being deleted when a user logs off from RDS. I'm experiencing this bug also and haven't found anything to fix it yet.
https://social.technet.microsoft.com/Forums/windowsserver/en-US/dffeb258-b985-452b-82f3-b66b950b98b6/user-profile-disks-with-windows-search?forum=winserverTS
https://social.technet.microsoft.com/Forums/windowsserver/en-US/e6d4e3e6-37ef-488c-86ac-d135e3f2353f/windows-search-index-and-user-profile-disks?forum=winserverTS
https://social.technet.microsoft.com/Forums/windowsserver/en-US/dc6328e9-96dc-4377-a23f-0fb7020e5daa/indexing-user-profile-disk-on-a-file-server-or-on-the-rdsh-server?forum=winserverTS
my PC Techs http://www.mypctechs.com

Spotlight and iCal search not working after upgrade to Leopard

I recently upgraded my MBP to Leopard (10.5.7), and everything seemed fine. Except search in iCal wasn't working. I looked in forums and found a suggestion - renaming Calendar Cache in Home>>Library>>Calendars, then restarting iCal. iCal rebuilt the Calendar Cache (or looked like it was, progress bar and all), but search still wasn't working, failing to bring up events I was looking right at.
Then I tried to use Spotlight, and it didn't seem to be working either. I tried searching for Safari, and after a brief pause, Spotlight said "No Result Found." I confirmed Safari is in fact still on my MBP and working (opened from applications folder). After some more hunting on forums, I found a thread talking about how to force Spotlight to re-index, figuring that was at least Spotlight's problem. Here's the thread - http://forums.macrumors.com/showthread.php?t=381832
I tried what it suggested, using the command line in Terminal, but Terminal just spat back "No Index." So now I'm stumped. Any ideas? I've already tried rebooting, to no effect, though I'll try it again tonight.

Well, thanks again for all the suggestions, but I sort of stumbled on the fix - which turned out to be upgrading MacFUSE. I had forgotten I installed that so I could read/write to my BootCamp Windows partition under Tiger, and a couple times when I would restart my computer I'd get an error message about MacFUSE (ironically, the error claimed my OS was out of date, but it was really MacFUSE that was out of date).
After I updated to the latest version of MacFUSE and restarted, Spotlight started indexing. Now it works just fine. Not sure if this is a known issue, but it seems that was most likely the problem.
Now I just have to figure out why the search feature in Calendar doesn't work... already tried rebuilding the Calendar Cache multiple times. Any ideas for that one?

Unresponsive mac, nothing opening and safe mode not working

Was browsing on Firefox this morning with several windows open tried to use "logmein" app and got the spinning ball for too long. Restarted and logged back in which took longer than usual. The dock would then barely load and if It did would work very slowly, nothing opens at all other than the downloads folder opens and dashboard just about appears, also the top navigation bar doesn't appear only some grey icons on the top right. I've tried opening in safe mode, just gets stuck.
Please help mac enthusiasts!!
cheers, harrison

Hi..
It does turn on, but just sits on the apple logo and spinning wheel.
If you don't hear the Mac startup chimes which indicate your Mac has passed it's startup diagnostics test, you need to take your Mac in for service.
Apple - Find Locations

Search not working as expected for list

We're running SP 2013 Ent on-prem. I have a user whose added several text columns to a list an when he performs a search for data in those fields, it returns nothing. It's very inconsistent, some rows will return if you search on them, but others will not.
Here's what I've done so far:
Checked the Search App, and it's indexing the list and the items with no issue
Created an index on the columns he wants to search on (really, just one column, which is a Single line of text)
Re-indexed the list
Kicked off a full crawl
Punched monitor
I'm out of ideas. Any help would be awesome. Thank you.

Thanks for the response. Here are the answers to the question you asked.
          1. We are not using the transaction and according to the WL documentation in the first message we do not need to. We really do not want to for other reasons too.
          2. Yes mesages are sent persistent.
          3. Yes MDB is configured to use durable subscription.
          4. EMS is not doing anything different. I can clearly see it receving the ack from wl even if the runtime exception is thrown in MDB.
          5. Thanks for the work around suggestion that would be last resort.
          Thing is all this works fine for queue. It is only the topic having issues.

Contribution points display and search not working in Safari 5?

Hi all,
Are the contribution points display and SDN search not working for everyone else in Safari 5 or is it just me?
Chrome 5 and Firefox 3.6 (all on Mac OS X 10.6) seem to be working fine.
Thanks,
Ethan

The thread titles are no longer hyperlinked in the contributions overview and the quote chevron does not work either since yesterday.
Who was the beta tester and where are their test scripts?
A simple thread with a little bit of everything in it and a windiff against the before & after would detect these things?
Cheers,
Julius

How can you create a voice recording and save it as an mp3?

I want to create a voice recording and save it as an mp3. How can I do that on the MAC? Right now I can only think of recording the voice in iMovie, but it does not have a choice to save as an mp3.

Rather that iMovie, you may want to check our Audacity.
It's a free, open-source audio editor and recorder.
You can easily save a recording as an MP3.
http://audacity.sourceforge.net/
Matt

Apple Mail Search and Spotlight do not work for locating email messages after upgrading to Lion 10.8.3.

Apple Mail Search and Spotlight do not work for locating email messages after upgrading to Lion 10.8.3 on my 27" iMac.
When searching in Apple Mail, sometimes a get a few results (with many missing), and sometimes no results at all.
I had absolutely no problems before with Snow Loepard.
I have reindexed mail and my startup drive. I have followed discussions regarding this matter and tried everything - a waste of time.
This is VERY serious for me - I have many thousands of messages that I archive and need to reference for work and clients, and now I cannot find them.

I found out that I needed a $100 mini displayport to dual-link dvi adapter to make my $30" cinema display work with my macbook pro
http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter?fnode=51
When I found out that solved the problem, I took it back because that was too expensive for a stupid adapter, and it still didn't work perfectly.

Knowledge Search not working in Win client

hi there
i have a problem with knowledge search not working in IC Win Client in CRM version 5.0
i guess the problem is with the workspace that is IIA for solution search that is assigned against the knowledge search
please tell what should i do as right now when i am trying to execute it or open the knowledge search dump is coming stating null object referenced
i wonder what could be the solution
best regards
ashish

Hello ashish,
I had that problem too. You have to apply note 1002299 to restore missing configurations in SAF.
Also, if you worked with IIA in previous versions, take a look at note 656321 to check it's evolution (replacement by SAF).
Good luck and Kind regards,
Bruno

WP8.1 MDM Restrictions - Voice record and safe search not working as expected

Similar Messages

Maybe you are looking for