Write a note in MIR6 using an ABAP custom report

Hi all,
i've to create a custom ABAP report which parameters are: rbkp-belnr, rbkp-gjahr and field(70).
When report runs i've to write field(70) in Note of mir4 called for that rbkp-belnr before inserted!
How can i do it?
I know FM as EDIT_TEXT, SAVE_TEXT...how can i use these?
Please,
help me,
thanks,
Alex.

HI,
You will have to make use of SAVE _TEXT FM.
The details of the relevant fields is as follows:-
TDOBJECT = 'RBKP'
TDNAME = '51056006572009' (complete document number with the year)
TDID = '0001'
TDSPRAS =  sy-langu.
Pass the text in the LINES table of the FM.
Regards,
Ankur Parab

Similar Messages

  • ABAP Custom Report (ALV Format) in Background Processing

    Hi
    I am not the hardcore ABAP Person. But want to know about the detail fact of the ABAP Custome Reports. The question is can we do the background processing for the ABAP Custome Report in ALV Format.
    If Yes ..do we require to have any additional Function/code to get the spool in ALV Format. I saw the comments that the output will look like the mess.
    Please share your comment or any useful documenation on this. We are in ECC 6.0
    Thanks in advance..and yes it will be rewared by points.
    Navin

    You can use alv's in background using docking containers, but the display wont be interactive. If you search the forum you will see tons of threads which talk about running ALV's in background.
    For the output to be interactive, you can run the report in foreground and do the data processing in background.
    Refer this link:
    Displaying ALV Grid in Background Job

  • Tables used for Devloping Customer Reports Of solution manager report

    Dear All,
    Kindkly Suggest Some Tables,which i can use in developing the solution manager report.
    key fields i m using From results of Tcode      CRM_DNO_MONITOR
    ID
    PERSON RESPONSIBLE
    TEAM SUPPORT
    POSTING DATE
    PRIORITY
    THANKS IN ADVANCE.

    Update my question my deadline is up to complete,
    Regards,
    Thiru. R

  • Is there any BI Dashboard view not allowed to use in BIP report?

    My customer wants to display BI Dashboard page on BI Publisher report.
    Is there any BI Dashboard view which is not allowed to use in BI Publisher report?
    Seem no summarized document for this, and then can I understand like “No related limit for BIP report”?

    Explore this page OBIEE - Presentation Variable System (reserved variable) | GerardNico.com (BI, OBIEE, OWB, DataWarehouse)

  • ABAP Customised Reports Are Slow.

    Hello All,
    We have a problem with the Abap customized reports, which is taking too long to execute and sometimes throwing dumps like TIME_OUT.
    I have evaluated the program from se38 for those reports and the result was:
    The ABAP Graph is showing green.
    The Database Graph is showing RED.
    What can i do to reduce the execution time of 'Z' Reports.
    The other standard reports are working fine and not taking that much time to execute.
    Thanks.
    Regards,
    Mudassir.Imtiaz

    > The ABAP Graph is showing green.
    > The Database Graph is showing RED.
    > What can i do to reduce the execution time of 'Z' Reports.
    Optimize your program.
    Since the database execution seems to take most of the time you have to check your selects.
    I have seen many program where there are nested select statements reading too much data, e. g. using "select *" instead of only reading the necessary fields. You may also check the sequence of how you access the data if you read from the database. You may also check whether it may be better to use function modules to get specific data instead of trying to read from the tables directly.
    Markus

  • Custom Report Not fetching values for parameter of report (Valueset not pop

    Hi,
    I am running custom report on Oracle application R12. This report parameters used standard value set for fetching purchase order number. The value set is not populating any values for the custom report. but for the standard report where this valuse set populating proper result.
    It's bit Supprising ...the same valuset populating values for standard reports but not for custom report developed by me.
    Value set query using table valueset and getting values from po_headers (View)
    Thanks

    Hi All,
    Luckily I have been able to rectify the problem !
    I tried retrieving the output using LISTCUBE to show the SID of the InfoObject  also for which I was unable to get the data. After the report successfully gave the output for those I/O, I checked again I could see the data in the I/O maintain master data !
    It worked like magic to me !
    But I could guess that since it is a virtual I/O therefore it is not able to retrieve the data from the table directly and is able to do that only after the SID of this I/O is retrieved.
    (If a characteristic does not have any master data, the values from the SID table are displayed for the "Values in Master Data Table" mode.)
    Closing the thread !
    Regards
    Shalabh

  • Custom report: Machine Name Not Match Serial Number

    What criteria would I use for a custom report that would show computers
    with Machine Names not matching Serial Numbers?

    > What criteria would I use for a custom report that would show computers
    > with Machine Names not matching Serial Numbers?
    Don't really see an easy way to do that. You don't get an option to say
    machine name not= to serial number or visa versa. The only thing I can
    see to do is create a basic workstation report and display machine name
    and serial number and do a side by side comparison.

  • Read orders which are not technical complete in custom report

    Hi,
    what do you recommend to read all orders which are not from status "technical complete" in a custom report. Is there a function module to acchieve this with good performance or what do you recommend?
    Thanks a lot.
    Kind regards
    Manfred.

    Hi Manfred,
    Since you asked about a function module for use in a custom report, it is likely that you are not looking to use a standard transaction to display the orders.
    The phase of a maintenance order can be found from the field AFIH-IPHAS, where the phases are:
    0     Outstanding
    1     Postponed (currently not used)
    2     Released
    3     Technically completed
    4     Manual deletion indicator set
    5     Historical order
    6     Completed for business (from 4.6)
    So to find non-technical complete - you would select where iphas not equal to 3. If you need to make this selection RFC capable, then you can wrap it in a RFC capable function module
    Regards
    Andrew

  • Hi am trying to save Data into a write to measurement file vi using a NI PXI 1042Q with a real time mode but it is not working but when i run it with uploading it into the PXI it save in to the file

    Hi am trying to save Data into a write to measurement file vi using a NI PXI 1042Q and DAQ NI PXI-6229 with a real time mode but it is not working but when i run it without uploading it into the PXI it save in to the file please find attached my vi
    Attachments:
    PWMs.vi ‏130 KB

     other problem is that the channel DAQmx only works at real time mode not on stand alone vi using Labview 8.2 and Real time 8.2

  • I need help from chile and use a language translator to write and not turn my iphone4

    I need help from chile and use a language translator to write and not turn my iphone4

    http://support.apple.com/kb/TS3281       
    Not turn on

  • Hi I am using MAC OS Yosemite 10.10.2. I am unable to save images post processing in CC 2014. Error given - "Unable to save image Write Access not granted"

    I am a new user to the Photoshop CC 2014. I am unable to save images post processing. Error given is "Unable to save image Write access not granted". Can some one please help me with this.
    I am using Mac OS Yosemite Version 10.10.2
    Regds
    Shashi

    In a finder window highlight and right click the folder you are trying to save to and select Get Info. In the window that opens look at the bottom to see if you have Read/Write permissions. If you don't click the Plus sign and add your Admin Username to the list and give it full Read/Write permissions.
    Open Disk Utility and on the First Aid tab select Repair Permissions and let it run.

  • I swtiched from LabView7 to LabView8.2, and now my parallel port on LPT1 is not more recognised (I am not able to use VISA to write on it). Why?

    I switched from LabView7 to LabView8.2, and now my parallel port on LPT1 is not more recognised (I am not able to use VISA to write on it). Why?

    Hi,
    Sorry for the delay,
    I need to know more informations about your problem. Have you check the configuration of LPT in MAX? Can you open a VISA session? Do you receive a timeout error when you try to write on that port?
    You can find same importants informations about parallel port configuration for different versions of LabVIEW at this link: 
    http://digital.ni.com/public.nsf/websearch/E6415E8A8376F63D86256C46007592E8?OpenDocument
    Let's me know.
    Riccardo

  • I have the original iPad can I use a stylus pen to write in notes?

    I have the original iPad can I use a stylus pen to write in notes?

    One thing to be aware of is that capacitive stylii have a rather broad tip. This makes them feel more like writing with a marker than a pen. (though the width of the line is controlled by the software.)

  • How to count the days between Date Range using OO ABAP?

    hi experts,
            i want to count the days between Date Range using OO ABAP for that  which class and method  can i use?.
    Thanks,
    Mahesh.

    Not sure I understand the requirement for it to be OO, but you could always write your own (i.e. use this):
    REPORT zz_date_diff.
    CLASS date_diff DEFINITION.
      PUBLIC SECTION.
        METHODS diff IMPORTING     i_date_fm TYPE d
                                   i_date_to TYPE d
                     EXPORTING     e_days    TYPE i.
    ENDCLASS."
    CLASS date_diff IMPLEMENTATION.
      METHOD diff.
        e_days = i_date_to - i_date_fm.
      ENDMETHOD."
    ENDCLASS."
    DATA: g_ref TYPE REF TO date_diff,
          g_days  TYPE i,
          g_date_fm  TYPE d VALUE '20080101',
          g_date_to  TYPE d VALUE '20090101'.
    START-OF-SELECTION.
      CREATE OBJECT g_ref.
      CALL METHOD g_ref->diff
        EXPORTING
          i_date_fm = g_date_fm
          i_date_to = g_date_to
        IMPORTING
          e_days    = g_days.
      WRITE g_days.

  • Problem in event handling using oo abap code

    Hi,
    My requirement is i need to disply 3 blocks in ALV format.I have done that.Now my problem is if i double click on aufnr of the first block, it should call the transaction code. I have written the code in oo abap but i have used function modules for ALV.Now my doubt is 'How to write an event  once the user double click on the particular field of the first block, it should call the tcode " using object oriented code.
    How to populate the heading for each block using oo abap code.
    Thanks & Regards
    Anus

    hi.....
    Use Double_click event handler method of class cl_gui_alv_grid of first block....
    if not solved .
    Send me Your program lines ...........
    Best Regards
    Prabhakar

Maybe you are looking for