Write message in Joblog at Runtime

Hi,
1. i´m running a batchreport and want to put a message at predefined steps into the Joblog.
I used message with Type 'I' or 'S' in my report but the message is only visible when the job is finished.
Any ideas to put in a message at runtime.
2. The same issue for the spoolfile. Is it possible to show the current spoolfile at runtime ?
Thanks,
Gordon

I don't think it is possible..
Unless and Until, Joblog or Spool file is not completely closed - it will not be available for display.
You may check for Logging options with Log Objects (Display Log - SLG1). I am not sure if this will work as per your requirement, but you can give it a try.
Regards,
Mohaiyuddin
Edited by: Mohaiyuddin Soniwala on Nov 25, 2008 3:45 PM

Similar Messages

TS3694 Have error message ....Runtime Error! program: C:\Program Files (X86)\itunes\iunes.exe R6034

Have error message ....Runtime Error! program: C:\Program Files (X86)\itunes\iunes.exe R6034

Apple's advice on this issue can now be found here: TS5376: iTunes 11.1.4 for Windows: Unable to install or open.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See the user tip Backup your iTunes for Windows library with SyncToy for a suggested strategy.
If you have difficulty downloading the iTunes setup file try clearing your browser's cache or using an alternate browser.
If content is missing from the library following the repair see Empty/corrupt iTunes library after upgrade/crash.
For device connectivity issues following the repair see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5.
MobileMe is a discontinued service and should be removed if present. See HT2992: MobileMe: Uninstalling the MobileMe Control Panel for Windows for details.
tt2

[svn] 4226: Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working.

Revision: 4226 Author: [email protected] Date: 2008-12-03 15:25:17 -0800 (Wed, 03 Dec 2008) Log Message: ----------- Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working. QA: Yes Doc: No Checkintests Pass: Yes Details: * Make sure the <reliable/> option is treated as a nested element rather than an attribute of its parent <network> element. Ticket Links: ------------ http://bugs.adobe.com/jira/browse/LCDS-517 Modified Paths: -------------- blazeds/trunk/modules/core/src/flex/messaging/Destination.java

Revision: 4226 Author: [email protected] Date: 2008-12-03 15:25:17 -0800 (Wed, 03 Dec 2008) Log Message: ----------- Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working. QA: Yes Doc: No Checkintests Pass: Yes Details: * Make sure the <reliable/> option is treated as a nested element rather than an attribute of its parent <network> element. Ticket Links: ------------ http://bugs.adobe.com/jira/browse/LCDS-517 Modified Paths: -------------- blazeds/trunk/modules/core/src/flex/messaging/Destination.java

[svn] 4195: Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working.

Revision: 4195
Author: [email protected]
Date: 2008-11-26 13:08:23 -0800 (Wed, 26 Nov 2008)
Log Message:
Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working.
QA: Yes
Doc: No
Checkintests Pass: Yes
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-517
Modified Paths:
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/config/ServerConfig.as

Revision: 4195
Author: [email protected]
Date: 2008-11-26 13:08:23 -0800 (Wed, 26 Nov 2008)
Log Message:
Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working.
QA: Yes
Doc: No
Checkintests Pass: Yes
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-517
Modified Paths:
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/config/ServerConfig.as

[svn] 4193: Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working.

Revision: 4193
Author: [email protected]
Date: 2008-11-26 11:40:05 -0800 (Wed, 26 Nov 2008)
Log Message:
Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working.
QA: Yes
Doc: No
Checkintests Pass: Yes
Details:
* Foundational update to include destination config in what we collect for runtime config exchange with new clients for destinations with network/reliable=true (LCDS only).
* Also typo in comment in AbstractConnectionAwareSession fixed.
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-517
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/AbstractConnectionAwareSession.java
blazeds/trunk/modules/core/src/flex/messaging/Destination.java
blazeds/trunk/modules/core/src/flex/messaging/services/AbstractService.java

Revision: 4193
Author: [email protected]
Date: 2008-11-26 11:40:05 -0800 (Wed, 26 Nov 2008)
Log Message:
Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working.
QA: Yes
Doc: No
Checkintests Pass: Yes
Details:
* Foundational update to include destination config in what we collect for runtime config exchange with new clients for destinations with network/reliable=true (LCDS only).
* Also typo in comment in AbstractConnectionAwareSession fixed.
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-517
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/AbstractConnectionAwareSession.java
blazeds/trunk/modules/core/src/flex/messaging/Destination.java
blazeds/trunk/modules/core/src/flex/messaging/services/AbstractService.java

How to write message?

Hi,
I have a problem in writting message after downloading. When the records of Customer download successful, the message" Customer code 1111111 download OK' will showed.
With the coding I wrote, Just only one customer code showed in the download message, and the other customer code which were download successful could not been showed.
Question: I need to show all the successful downloaded customer code, How can I correct the folloing coding?
Please help, thank you.
Data:      anz_dl1(15)   type n,
              anz_dl2(15)   type n.
BEGIN OF HTEXT1,
        text1(30)         VALUE 'customer code',
        anzahl1(150),
        text3(20)         VALUE ' DOWNLOAD NG',
        END OF HTEXT1,
        BEGIN OF HTEXT2,
        text3(30)         VALUE 'customer code',
        anzahl2(150),
        text4(20)         VALUE ' DOWNLOAD OK',
        END OF HTEXT2.
CLEAR anz_dl1.
      CLEAR htext1-anzahl1.
WRITE T1-KUNNR TO anz_dl1.
      WRITE T-KUNNR TO anz_dl2.
WRITE anz_dl1 to htext1-anzahl1.
      CONDENSE htext1.
      WRITE anz_dl2 to htext2-anzahl2.
      CONDENSE htext2.
IF p_downl = 'X'.
             SKIP 2.
        WRITE: / htext1.
        SKIP 2.
        WRITE:/ htext2.

Hi ,
Thank you for your e-mail.
I write the coding as following and the following and the outlook like this:
Outlook
11 records writen in file C:\TEMP\CU_CC2080_28012008_134446.txt
Customer code: 300100000 DOWNLOAD NG
Customer code: 000000000000000 DOWNLOAD NG
Customer code:300100005 DOWNLOAD OK
Customer code: 300100089 DOWNLOAD OK
Customer code: 000000000000000 DOWNLOAD OK
Customer code: 000000000000000 DOWNLOAD NG
My question is :
The customer code 000000000000000 do not exit, but it appear in the outlook for DOWNLOAD NG AND DOWNLOAD OK, how can I correct it?
The source code:
CLEAR anz_dl1.
LOOP AT t1.
    WRITE t1-kunnr TO anz_dl1.
    WRITE anz_dl1 TO htext1-anzahl1.
    APPEND htext1 TO htext1_tab.
ENDLOOP.
SORT htext1_tab BY anzahl1.
DELETE ADJACENT DUPLICATES FROM htext1_tab COMPARING anzahl1.
CLEAR anz_dl2.
LOOP AT t.
    WRITE t-kunnr TO anz_dl2.
    WRITE anz_dl2 TO htext2-anzahl2.
    APPEND htext2 TO htext2_tab.
ENDLOOP.
SORT htext2_tab BY anzahl2.
DELETE ADJACENT DUPLICATES FROM htext2_tab COMPARING anzahl2.
WRITE anz_dl1 TO htext1-anzahl1.
      APPEND htext1 TO htext1_tab.
      WRITE anz_dl2 TO htext2-anzahl2.
      APPEND htext2 TO htext2_tab.
LOOP AT htext1_tab INTO htext1.
          CONDENSE htext1.
          SKIP 2.
          WRITE: / htext1.
        ENDLOOP.
        LOOP AT htext2_tab INTO htext2.
          CONDENSE htext2.
          SKIP 2.
          WRITE:/ htext2.
        ENDLOOP.
Please help, thank you!

Can I use other language to write messages?

can you use other european language to write messages?

If you are talking about typing messages, emails, notes, etc., go to Settings | General | Keyboard | International Keyboards | Add New Keyboard. Add the keyboards for any languages listed that you may wish to use. When you are using the keyboard, a small globe will appear to the left of the space bar. Each time you touch it, it will cycle to another of your chosen keyboards.

I am trying to set up Recipefox to export MasterCook 11. What configurations should be "export" box. I am also getting an error message that Java.lang.Runtime exception. could not create a new folder for the writer.

When Igo to "Export them" a box shows that my configuration paths are not correct.

Support for the RecipeFox extension is over here: 
http://recipetools.sourceforge.net/phpBB3/index.php

Write Message in Job Log from FM

Hi everyone,
I´m having an issue trying to find the way to write a message in job log.
I´ve read a lot of solutions but I can't find anyone that describes how to do it from a function module.
What i'm saying is that all the answers focus on reports and I have to develop this from a function module.
If anyone can help me with that, I´ll appreciate it.
Thanks everyone.
Best regards.
Pablo.

Hi Thomas,
Thanks por replying. MESSAGE statement does not work.
Regarding the last question, it can´t be done like that .
Regards.
Pablo.

Write message to Job log with message class and message number

hi folk,
When running a background job I'm able to write a message to the job log using the statement - Message "some text..." type 'I'.
In the Job log I can see the message "some text.." with a "default" message class and message number (but in my report i don't specify any message ID) so I have no idea it comes from.
Then I try to send a message where I specify the message class/number etc...using message id 'Z1' number 000 with "some text..." In the job log I now can see the "right" message class "Z1" and the number 000, but the message is empty?
Please advice how to write a message with the message class and message number.
Best regards
LinhNg

Hi Linh,
How did you provide the text "Some message"? Did you hard code it or used a text element?
Regards,
Immanuel.

How do I choose the font when I write messages in Firefox? Right now, the default seems to be Courier.

I'm on an iMac running OS 10.6.4 and, because of IT issues, I have to go through Webmail and Microsoft Outlook Web Access. I have already checked the Firefox Preferences pane. It only gives me the option to change the font for the Firefox "shell" and not the messages I write within it. I used to run Firefox on a G4 with OS 10.4.11, also through Web Access, and my message font was Verdana, which I liked. Is there any way to select my message font now?
Thanks.

Try to change the Monospace font.
* Firefox > Preferences > Content : Fonts & Colors > Advanced

Photoshop Elements 10 in Windows 8 will not open. Adobe Photoshop Elements 10 Error Message: "Microsoft Visual C++ Runtime Library Runtime Error. This application has requested the Runtime to terminate it in an unusual way. Please contact the application'

How to get Elements 10 to open in Windows 8 ?
See the error message quoted above in the subject line.

See this help document:
https://helpx.adobe.com/photoshop-elements/kb/microsoft-c-runtime-error-launcing.html

Windows 7 Error Message: Microsoft Visual C++ Runtime Library Runtime Error.... Followed by Windows Explorer Has Stopped Working

I am running a system that is not quite 6 months old, which is loaded with Windows 7 Professional, 64 bit.
The error message that I get is as follows: Microsoft Visual C++ Runtime Library. Runtime error! Program C:\windows\Explorer.exe. This application has requested the runtime to terminate it in an unusual way. Please contact the
application's support team for more information.
Once I respond to that message, I get a message that says "Windows Explorer has stopped working. Then I get "Windows Explorer is re-starting"
I don't know if the next event is related - today, immediately after getting the message above, I got a pop-up that said "An update to Adobe Flash Player is available" - and I am given the option of installing it or not. Today, I did not install
the update - although I recall having accepted this update in the past (again, I don't know if the two situations always occur together).
Is there some help I can be provided to correct this problem? I have looked at several related topics in this database, but have not found anything that seems to directly relate to my question.
Thanks! Mark

Hi,
Did you try to reinstall the Microsoft Visual C++ 2008 Redistributable
Package (x86) to check this issue?
What about to boot the computer in safe mode and Clean Boot to test this issue?
Regards,
Vincent Wang
TechNet Community Support

Message Mapping : Testing at Runtime

Hi all,
I am doing scenario File XI IDoc...
I was encountering error.. Runtime exception in Mapping...
So i tried the testing step described by michal.
if i paste the payload of the data obtained from SXMB_MONI in test tab of message mapping editor i will get error
Cannot produce target element /WGSREQ02/IDOC/E1WGRK1. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd 
but for the same paylod in "src" of testing tab if i add namespace the testing is working fine.
Kindly can anybody give me suggestion
Regards,
Ramesh P
Message was edited by:
Ramesh Parashivamurthy

Message Mapping
http://help.sap.com/saphelp_nw04/helpdata/en/49/1ebc6111ea2f45a9946c702b685299/frameset.htm
User Defined Functions:
http://help.sap.com/saphelp_erp2004/helpdata/en/22/e127f28b572243b4324879c6bf05a0/frameset.htm
Advanced Graphical Mapping:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/b9af5e71-0701-0010-d0b8-f612fb6593dd
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/be05e290-0201-0010-e997-b6e55f9548dd

Write message in ABAP inbound proxy

I put this in the inbound class, where can I find the message?Thanks.
WRITE :'TEST 主键冲突'.

Hi,
there is only one place where you should be able to find it
TCODE- ST22
Regards,
Michal Krawczyk

Write message in Joblog at Runtime

Similar Messages

Maybe you are looking for