Writing A File When Exception Occurs

Hi All
Is it possible to write a file with the variable when an exception is triggered using BPM
Regards
Jayaraman

Hi,
See this link on how to handle exceptions in BPM.
http://help.sap.com/saphelp_nw2004s/helpdata/en/33/4a773f12f14a18e10000000a114084/content.htm
You can use a send step and create a corresponding file CC to write a file.
Regards,
Sudheer.

Similar Messages

"Error writing to file" when installing Oracle9i

I am fairly new to Oracle and have not been able to install Oracle 9i on my Redhat 7.2 box. In three attempts to install I have encountered the same error at some point, usually early on 5% or 10% into the install.
The error is:
     "Error in writing to file /usr/oracle/product/9.2.0/olap/wrksht/wks.jar"
However, it has not happened on the same file each time. I have stopped the installation of that component, but it encounters the same error on other files. I have tried redownloading the oracle disks and reinstalling, but to no avail. I read on one posting that Oracle needs to have glib2.2(rather than glib1.2) installed, so I downloaded it and will be trying that later today. If anyone has encountered this error and knows how to solve it I would appreciate the help. Below I have listed my computer configuration and I have attached the portion of the install log that identifies the error that takes place.
     Thanks
     Ed
     Here is my setup:
     Dual boot system running Redhat 7.2 and Win2k      server.
     Pentium III 400 MHZ
     256 MB of RAM
     30 GB Hard drive split in half-- 15GB for linux      15GB for windows.
     The mount points for linux are
     /          400 MB
     /boot      400 MB
     /home          1GB
     /tmp          600 MB
     /swap          600 MB
     /usr          12GB
     ORACLE_HOME is /usr/oracle/product/9.2.0
     all data files and software are under /usr/oracle
     Portion of the install log:
Starting install install phase 1 of component Oracle OLAP Worksheet
Calling query areasQueries2.2.0.7.0 getProductHome
name = oracle.swd.jre
startVersion = 1.1.8.0.0
endVersion = 1.1.8.99.99
acceptCompatible = null
Query returned : /usr/oracle/jre/1.1.8
Setting value of JDK_ROOT to /usr/oracle/jre/1.1.8
Calling action fileActions2.2.0.10.0 copyGroupFromJar
     selectedNodes = null
     copyGroup = worksheet
     permissions = 644
     owner = null
     group = null
     copyAsText = null
     JarLoc = /tmp/OraInstall2003-01-23_03-02-09PM/temp57
     gpEntries = [[xsjwork.jar ->%ORACLE_HOME%/olap/wrksht/xsjwork.jar 1803268 plats=1=>
Exception thrown from action: copyGroupFromJar
Exception Name: IOException2
Exception String: Error in writing to file /usr/oracle/product/9.2.0/olap/wrksht/wks.jar
Exception Severity: 2
*** Cancel Dialog: ***
User selected: Stop installation of all products.
Exception handling set to prompt user with options to RETRY IGNORE
User choice : User selected stop installation of all components
Error in writing to file /usr/oracle/product/9.2.0/olap/wrksht/wks.jar
Unable to read the list of homes from the inventory.


Hi,
Did you guys finally find solution to the problem?
I have been trying to install Oracle 9.2.0.1 on redhat 8.0 box, for ages now. I get the following error first during install
Error in writing to file libclntsh.so.9.0
Then it is a series of errors, similar.
In the end there is the dreaded linking error... for the ins_rdbms.mk sdo_on
i just cant handle it.
What the hell is wrong?
I have done everything right as far as i know... any solutions?
cheers

Line # not displayed when exception occurs on server.

We have our application code base on Websphere 4.0. When any exception occurs on the server, soure code line # is not dispalyed in stack trace print and some times it makes diffiicult to analse the problem. Is any one has any idea or suggestion get the source line #
in stack trace print.
thanks
pary

Hi,
You have probably built your code without debug information.
/Kaj

Error writing to file when installing iTunes 10.

When I updated to iTunes 10 yesterday, it updated fine, but when I went to run it today, it had to configure. It was almost completed when I got the error "Error writing to file: C\Program Files\iTunes\iTunes.Resources\ru.lproj\IPod touch License.rtf". I tried to access the file, but it says the file cannot be found.
I uninstalled iTunes, and went to re-install it, but at about the same time I get the exact same error.

Hi,
Did you guys finally find solution to the problem?
I have been trying to install Oracle 9.2.0.1 on redhat 8.0 box, for ages now. I get the following error first during install
Error in writing to file libclntsh.so.9.0
Then it is a series of errors, similar.
In the end there is the dreaded linking error... for the ins_rdbms.mk sdo_on
i just cant handle it.
What the hell is wrong?
I have done everything right as far as i know... any solutions?
cheers

Error writing to file when updating Itunes Windows 7

Error message: C\Program files (x86) Common Files\Apple\Mobile Device Support\AppleMobileDeviceHelper.resources\clientdescription.plist MAKE SURE YOU HAVE ACCESS TO THAT DIRECTORY.
HELP!!!

I don't know where to go from this point, but I threw caution to the wind and double-clicked iTunes Windows Installer Package. It went to work until I got another error message: "Error writing to file: C:\Config.Msi\1279ed.rbf. Verify that you have access to that directory."
Are you running Kaspersky security software on that PC? I tend to identify that message with Kaspersky interfering with the install.
If there is Kaspersky on board, we should try some general-principles getting-past-security-software-interference troubleshooting.
Download and save a fresh copy of the iTunesSetup.exe (32-bit installer file) or iTunes64Setup.exe (64-bit installer file) to your Hard drive. (Don't run the install on line, and don't start the install just yet.)
http://www.apple.com/itunes/download/
Restart the PC. After the PC restarts do not open any applications. Disconnect from your network and/or the internet. Now switch off all your security software (firewall, antivirus, antispyware).
Now start the install by doubleclicking the iTunesSetup.exe (or iTunes64Setup.exe) file you downloaded earlier.
Reenable all security software prior to reconnecting to your network and/or the internet.
Any better luck with the security software shut down?

Sourse code line not showing when exception occurs on Oracle App server

I am working on Oracle9i As 9.03. I have deployed an ear file. When an exception comes in my API, ti does not pring the source code like. it says Unknown Source . while it prints the line no of other apis down the stack.

This is because we have reference to stub at the client end and that is created by container and moreover it is remote object. Remote object line numbers never come in stack trace. For the other object you are getting the line number, those are not Remote Objects.
Thanks
Pardeep Sharma

Trapping line number/source file where exception occured

Hi,
How can we trap the line number where an exception was thrown and then store this information in a local data object? The line number appears in the stack trace but the only methods i can find for extracting info from the stack trace seem to write onto a file and not a local object.
Appreciate any suggestions
-Nikhil

JDK 1.4 adds a getStackTrace() method to class Throwable. getStackTrace() returns an array of StackTraceElement objects, from which you can get file name/line number info and more.
prior to JDK 1.4, your best bet would be to do a printStackTrace() to a StringWriter, and parse the resultant string. however, i believe the stack trace format is not platform-independent, so if you're writing something that will be run on different VMs, beware.

Execute more 3 times where Exception occured?

My Oc4j version is 9.0.2.1.0
When Exception occured in EJB bean(Session Bean or BMP Entity Bean),
method will be called 3 times by oc4j atuomatically.
Why?
How can I forbid oc4j to do this?

I believe this also depends on the data source you use. If you use an "emulated" data source, I think it does not do retries. I'm relatively certain it does not do retries on "timeout", but I'm not certain it wouldn't retry with an emulated datasource on a real failure.
A "timeout" could easily occur if you were running in JDeveloper, and you were stepping through your EJB code. You could return successfully, but if you were using a non-emulated datasource with a non-zero "retries", it would call the method again, immediately after returning (that really threw us for a while).

Receiving Error "Exception Occurred !" when attaching files to Test Manager

We are receiving the error "Exception Occurred!" when attaching files to Test Manager under issues.
Error Message:
+"Exception Occurred !"+
No Permission to perform this action
I'm not sure if this is a permission issue or not on our end.
Here are the log entries from the debug and server logs.
Error Message from debugweb_07_16_09.log file:
+11:57:02:523 - TMJava addAttachment(): Unknwon exception thrown - avoiding program exit during save attachment of Issue node '42'+
Error Message from server.log file:
+2009-07-16 11:57:02,523 INFO [STDOUT] oracle.oats.otm.util.TMException+
+2009-07-16 11:57:02,523 INFO [STDOUT]      at oracle.oats.otm.web.util.AttachmentAction.addAttachment(Unknown Source)+
+2009-07-16 11:57:02,523 INFO [STDOUT]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)+
+2009-07-16 11:57:02,523 INFO [STDOUT]      at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)+
+2009-07-16 11:57:02,523 INFO [STDOUT]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)+
+2009-07-16 11:57:02,523 INFO [STDOUT]      at java.lang.reflect.Method.invoke(Unknown Source)+
+2009-07-16 11:57:02,523 INFO [STDOUT]      at oracle.oats.otm.web.OracleActionBase.execute(Unknown Source)+
+2009-07-16 11:57:02,523 INFO [STDOUT]      at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)+
+2009-07-16 11:57:02,523 INFO [STDOUT]      at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)+
+2009-07-16 11:57:02,523 INFO [STDOUT]      at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)+
+2009-07-16 11:57:02,523 INFO [STDOUT]      at oracle.oats.otm.web.ActionServlet.process(Unknown Source)+
+2009-07-16 11:57:02,523 INFO [STDOUT]      at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)+
+2009-07-16 11:57:02,523 INFO [STDOUT]      at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)+
+2009-07-16 11:57:02,523 INFO [STDOUT]      at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)+
+2009-07-16 11:57:02,523 INFO [STDOUT]      at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)+
+2009-07-16 11:57:02,523 INFO [STDOUT]      at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)+
+2009-07-16 11:57:02,523 INFO [STDOUT]      at oracle.oats.otm.util.RequestEncodingFilter.doFilter(Unknown Source)+
+2009-07-16 11:57:02,523 INFO [STDOUT]      at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)+
+2009-07-16 11:57:02,523 INFO [STDOUT]      at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)+
+2009-07-16 11:57:02,523 INFO [STDOUT]      at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:81)+
+2009-07-16 11:57:02,523 INFO [STDOUT]      at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)+
+2009-07-16 11:57:02,523 INFO [STDOUT]      at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)+
+2009-07-16 11:57:02,523 INFO [STDOUT]      at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)+
+2009-07-16 11:57:02,523 INFO [STDOUT]      at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)+
+2009-07-16 11:57:02,523 INFO [STDOUT]      at org.jboss.web.tomcat.security.CustomPrincipalValve.invoke(CustomPrincipalValve.java:39)+
+2009-07-16 11:57:02,523 INFO [STDOUT]      at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:153)+
+2009-07-16 11:57:02,523 INFO [STDOUT]      at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:59)+
+2009-07-16 11:57:02,523 INFO [STDOUT]      at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)+
+2009-07-16 11:57:02,523 INFO [STDOUT]      at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)+
+2009-07-16 11:57:02,523 INFO [STDOUT]      at org.jboss.web.tomcat.tc5.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:138)+
+2009-07-16 11:57:02,523 INFO [STDOUT]      at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)+
+2009-07-16 11:57:02,523 INFO [STDOUT]      at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)+
+2009-07-16 11:57:02,523 INFO [STDOUT]      at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:856)+
+2009-07-16 11:57:02,523 INFO [STDOUT]      at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:744)+
+2009-07-16 11:57:02,523 INFO [STDOUT]      at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)+
+2009-07-16 11:57:02,523 INFO [STDOUT]      at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)+
+2009-07-16 11:57:02,523 INFO [STDOUT]      at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)+
+2009-07-16 11:57:02,601 INFO [STDOUT]      at java.lang.Thread.run(Unknown Source)+
+2009-07-16 11:57:02,601 INFO [org.apache.catalina.core.ContainerBase.[jboss.web].[localhost].[otm]] action: Forward Name = failure, Path =/jsp/Exception.jsp+
+2009-07-16 12:05:32,926 INFO [org.apache.catalina.core.ContainerBase.[jboss.web].[localhost].[otm]] action: --Action=/displayAttachment.do: AttachmentAction.displayAttachment()+
+2009-07-16 12:05:33,082 INFO [org.apache.catalina.core.ContainerBase.[jboss.web].[localhost].[otm]] action: Forward Name = success, Path =/jsp/AttachmentForm.jsp+
+2009-07-16 12:05:34,645 INFO [org.apache.catalina.core.ContainerBase.[jboss.web].[localhost].[otm]] action: --Action=/displayUploadAttachment.do: AttachmentAction.displayUploadAttachment()+
+2009-07-16 12:05:34,645 INFO [org.apache.catalina.core.ContainerBase.[jboss.web].[localhost].[otm]] action: Forward Name = success, Path =/jsp/UploadFileForm.jsp+
+2009-07-16 12:05:53,067 INFO [org.apache.catalina.core.ContainerBase.[jboss.web].[localhost].[otm]] action: --Action=/addAttachment.do: AttachmentAction.addAttachment()+
+2009-07-16 12:05:53,067 INFO [org.apache.catalina.core.ContainerBase.[jboss.web].[localhost].[otm]] action: File NameC:\Documents and Settings\dfitzgerald\Desktop\TestErrorPleaseDelete.jpg+
+2009-07-16 12:05:53,067 INFO [org.apache.catalina.core.ContainerBase.[jboss.web].[localhost].[otm]] action: File size12683+
+2009-07-16 12:05:53,208 INFO [org.apache.catalina.core.ContainerBase.[jboss.web].[localhost].[otm]] action: nodeId returned : -1+
+2009-07-16 12:05:53,208 INFO [org.apache.catalina.core.ContainerBase.[jboss.web].[localhost].[otm]] action: null+

Alex,
We're using SQL Server and OTM 8.50.0233.
I've tried uploading jpg and bmp images.
Thanks

Fatal Exception occurred when trying to execute a JAR file

Hi,
I have compiled my project in a jar file with the purpose of having an 'almost' executable file that would run with a simple double click.
When running this file from the netbeans directory, it works fine, but if I move this jar file to, say, my desktop, then I get an error:
Fatal Exception occurred. Program will exit.
Is this normal?
basically, I would like to create a stand-alon file that I can send to other people who can run it on their machines
Am I doing the right thing, or missing something?
P.S I should add that my application needs to read contente from some txt files which are stored in my PC, but that is clearly speficied in the code
thanks

I found that if I copy the whole of the dist directory and subdirectories, it works fine. I guess that's what could not be found.
just for my learning, is that the correct solution: basically send over the whole dist+subdirectories and have the program run from there?
thanks

An exception occurred while reading or writing from/to the IIS server

Hi All,
I am trying to install and configure calendar connectivity in EP6 sp9.
As mentioned in
http://help.sap.com/saphelp_nw04/helpdata/en/1d/3d59fdaa5ebb45967ea107d3fa117a/frameset.htm, i have installed MSX-A component and On testing MSX-A Component i am not getting any error.
Also log file looks like this.
BEGIN 3/8/2005 10:09:00 AM----
URL: HTTP://10.10.18.213:8080/Calendar.asp
URL Parameters: Server=10.10.18.205&Alias=[email protected]&Action=READ&StartDate=200503081007&EndDate=200503091007&Email=[email protected]&Debug=true
Reponse: <?xml version='1.0' encoding='UTF-8' standalone='yes'?>
<!DOCTYPE OUTPUT [<!ELEMENT OUTPUT (FAILURE|APPOINTMENTS)>
<!ELEMENT FAILURE (ERRORNUMBER?, ERRORMESSAGE?, CLASSNAME?, METHODNAME?, LINENUMBER?, PARAMETERS?)>
<!ELEMENT ERRORNUMBER (#PCDATA)>
<!ELEMENT ERRORMESSAGE (#PCDATA)>
<!ELEMENT CLASSNAME (#PCDATA)>
<!ELEMENT METHODNAME (#PCDATA)>
<!ELEMENT LINENUMBER (#PCDATA)>
<!ELEMENT PARAMETERS (#PCDATA)>
<!ELEMENT APPOINTMENTS (APPOINTMENT*)>
<!ELEMENT APPOINTMENT (ID, SUBJECT?, LOCATION?, STARTDATE, ENDDATE, MEETINGTYPE, ALLDAY, RECURRING, BUSYSTATUS?)>
<!ELEMENT ID (#PCDATA)>
<!ELEMENT SUBJECT (#PCDATA)>
<!ELEMENT LOCATION (#PCDATA)>
<!ELEMENT STARTDATE (#PCDATA)>
<!ELEMENT ENDDATE (#PCDATA)>
<!ELEMENT MEETINGTYPE (#PCDATA)>
<!ELEMENT ALLDAY (#PCDATA)>
<!ELEMENT RECURRING (#PCDATA)>
<!ELEMENT BUSYSTATUS (#PCDATA)>]><OUTPUT><APPOINTMENTS></APPOINTMENTS></OUTPUT>
END 3/8/2005 10:09:00 AM----
i have created calendar repository and exchange system on the portal and now i am getting this error in MyAppointment iView in Content Provided by SAP.
An exception occurred while reading or writing from/to the IIS server.
i would appreciate if you please help me urgently
thanx and regards
Santosh Choudhary

Hi Akhilesh,
I am able to browse HelloWorld.asp in same website. Also i am not getting any error while testing data retrieval through SAPPXchTest.exe, log file looks like this.
IIS Log File
IIS Log File
#Software: Microsoft Internet Information Services 5.0
#Version: 1.0
#Date: 2005-03-18 04:44:58
#Fields: date time c-ip cs-username s-ip s-port cs-method cs-uri-stem cs-uri-query sc-status cs(User-Agent)
2005-03-18 04:44:58 10.10.18.213 - 10.10.18.213 8080 GET / - 401 Mozilla/4.0(compatible;MSIE6.0;WindowsNT5.0)
2005-03-18 04:45:05 10.10.18.213 santoshc 10.10.18.213 8080 GET / - 200 Mozilla/4.0(compatible;MSIE6.0;WindowsNT5.0)
Application Log File
BEGIN 3/18/2005 10:18:31 AM----
URL: HTTP://10.10.18.213:8080/Calendar.asp
URL Parameters: Server=10.10.18.205&[email protected]&Action=READ&StartDate=200503161151&EndDate=200503171151&[email protected]&Debug=true
Reponse: <?xml version='1.0' encoding='UTF-8' standalone='yes'?>
<!DOCTYPE OUTPUT [<!ELEMENT OUTPUT (FAILURE|APPOINTMENTS)>
<!ELEMENT FAILURE (ERRORNUMBER?, ERRORMESSAGE?, CLASSNAME?, METHODNAME?, LINENUMBER?, PARAMETERS?)>
<!ELEMENT ERRORNUMBER (#PCDATA)>
<!ELEMENT ERRORMESSAGE (#PCDATA)>
<!ELEMENT CLASSNAME (#PCDATA)>
<!ELEMENT METHODNAME (#PCDATA)>
<!ELEMENT LINENUMBER (#PCDATA)>
<!ELEMENT PARAMETERS (#PCDATA)>
<!ELEMENT APPOINTMENTS (APPOINTMENT*)>
<!ELEMENT APPOINTMENT (ID, SUBJECT?, LOCATION?, STARTDATE, ENDDATE, MEETINGTYPE, ALLDAY, RECURRING, BUSYSTATUS?)>
<!ELEMENT ID (#PCDATA)>
<!ELEMENT SUBJECT (#PCDATA)>
<!ELEMENT LOCATION (#PCDATA)>
<!ELEMENT STARTDATE (#PCDATA)>
<!ELEMENT ENDDATE (#PCDATA)>
<!ELEMENT MEETINGTYPE (#PCDATA)>
<!ELEMENT ALLDAY (#PCDATA)>
<!ELEMENT RECURRING (#PCDATA)>
<!ELEMENT BUSYSTATUS (#PCDATA)>]><OUTPUT><APPOINTMENTS></APPOINTMENTS></OUTPUT>
END 3/18/2005 10:18:31 AM----
But when i am Testing it from the Portal i am getting this error.
I have created Exchange Transport that whose configuration looks like this:
System Alias : myExchange
Domain : mydomain
exchange server : 10.10.18.205
IIS server : 10.10.18.213
Port : 8080
Protocol : Http
Exchange is the Name of System and Alias name is myExchange.
Hope this will help you to solve my problem.
Thanks and regards,
Santosh Choudhary

File Adapter not writing file when processed from one node in a clustered environment

In our environment, we have 4 server nodes running. We are using a file adapter to write file to a location in the server. the adapter is writing files when its processing data in all nodes except one.
Below is the JCA File
<connection-factory location="eis/FileAdapter" adapterRef=""/>
<endpoint-interaction portType="Write_ptt" operation="Write">
<interaction-spec className="oracle.tip.adapter.file.outbound.FileInteractionSpec">
<property name="PhysicalDirectory" value="/data/prd"/>
<property name="FileNamingConvention" value="Sample.dat"/>
<property name="Append" value="true"/>
</interaction-spec>
</endpoint-interaction>
the File Adapter health is running OK. What would be the potential cause

In our environment, we have 4 server nodes running. We are using a file adapter to write file to a location in the server. the adapter is writing files when its processing data in all nodes except one.
Below is the JCA File
<connection-factory location="eis/FileAdapter" adapterRef=""/>
<endpoint-interaction portType="Write_ptt" operation="Write">
<interaction-spec className="oracle.tip.adapter.file.outbound.FileInteractionSpec">
<property name="PhysicalDirectory" value="/data/prd"/>
<property name="FileNamingConvention" value="Sample.dat"/>
<property name="Append" value="true"/>
</interaction-spec>
</endpoint-interaction>
the File Adapter health is running OK. What would be the potential cause

Exception occurred while loading _WL_TIMESTAMP FILE

Hi all,
I have an application packaged in a EAR file, but when I deploy through the Weblogic Server Administration console, i get a strange error:
<Error> <EJB> <BEA-010003> <Exception occurred while loading WLTIMESTAMP FILE.
java.io.FileNotFoundException: /opt/bea/domains/bpm/servers/BPMServer/cache/EJBCompilerCache/1bscgreimm37w/_WL_GENERATED (Too many open files)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.(FileInputStream.java:106)
at weblogic.ejb.container.deployer.EJBDeployer.getFileHash(EJBDeployer.java:464)
at weblogic.ejb.container.deployer.EJBDeployer.compileIfNecessary(EJBDeployer.java:586)
at weblogic.ejb.container.deployer.EJBDeployer.prepare(EJBDeployer.java:1154)
Truncated. see log file for complete stacktrace
>
java.lang.NullPointerException
at weblogic.utils.FileUtils.remove(FileUtils.java:274)
Searching over the Oracle/BEA documentation i found this :
BEA-010003 Error: Exception occurred while loading WLTIMESTAMP FILE.
Description Exception occurred while loading WLTIMESTAMP FILE. Forcing recompilation: ioException
Cause The container generates WLGENERATED file, which stores the server version of the appc compiler. if the current server version is different from the version specified in WLGENERATED file, appc recompiles the beans. There was an error reading this file.
Action The container will automatically recompile the beans.
But if the container compiles the beans again, why in the deployments view, it doesn't work, and the application is never at Active state?
Any help is appreciated!
Thiago

Looking at your stack trace, I don't believe the issue is directly related to the WLTIMESTAMP file but rather it looks like you have hit the limit on the number of open file descriptors for your process (note that the stack trace says "Too many open files" immediately after reporting what file it failed to open). Looks like you either have an FD leak or your OS/shell limit on the number of open file descriptors allowed per process may be set too low for what you are trying to accomplish.

Error 1064 An exception occurred in the service when handling the control

Hi all,
I downloaded Oracle Business Intelligence 10.1.3.4.1 on windows XP successfully, once I try to start any service of Oracle BI [scheduler/server]. This error is shown *1064 An exception occurred in the service when handling the control request*.
Could anyone help me out?
Thanks in advance
Maitha

I checked the file
[68008] Scheduler Error: [nQSError: 67042] The Scheduler Configuration is incorrect.
[nQSError: 67004] Registry value for SchedulerScriptPath not set.
How the issue can be resolved ?

Exception occurs!! when button click

Hi.,
I am using jdev 11.1.5
I had created a jspx page in the master from and table detail
I had draaged a af:button and named it as post
In the action listner i had wrote the code as
    public void cb5_actionListener(ActionEvent actionEvent) {
                   BindingContainer bc = this.getBindings();
            OperationBinding op = bc.getOperationBinding("recintGlJrnlHd");
            Object r = op.execute();
In the AMimpl Method i had write the code as
    public void recintGlJrnlHd(List selectedRowIndexs){
        ViewObjectImpl vo = this.getGlJrnlHd1();
        Row newRow = vo.createRow();
        ViewObjectImpl c1 = this.getCursorC1_1();
        Row cr1 = c1.getCurrentRow();
        newRow.setAttribute("GjhBu", cr1.getAttribute("GrhBu"));
        newRow.setAttribute("GjhPlant", cr1.getAttribute("GrhPlant"));
        newRow.setAttribute("GjhJrnlType", cr1.getAttribute("GrvlJrnlType"));
        newRow.setAttribute("GjhJrnlNo", cr1.getAttribute("GrvlJrnlNo"));
        newRow.setAttribute("GjhJrnlSfx", cr1.getAttribute("GrhJrnlSfx"));
        newRow.setAttribute("GjhJrnlDate", cr1.getAttribute("GrhJrnlDate"));
        newRow.setAttribute("GjhYear", cr1.getAttribute("GrvlYear"));
        newRow.setAttribute("GjhPeriod", cr1.getAttribute("GrvlPeriod"));
        newRow.setAttribute("GjhDesc", cr1.getAttribute("GrhDesc"));
        newRow.setAttribute("GjhAppl", "GLM");
        newRow.setAttribute("GjhReversal", "N");
        newRow.setAttribute("GjhStatus","N");
        newRow.setAttribute("GjhCreBy", "NULL");
       newRow.setAttribute("GjhCreDate", "NULL");
        newRow.setAttribute("GjhUpdBy", "NULL");
        newRow.setAttribute("GjhUpdDate", "NULL");
        this.getTransaction().commit();
    }when i press the button an Null Pointer EXception occurs
at
Object r = op.execute();can anyone help me to resolve this issue

did you add recintGlJrnlHd method into bindings section in your page definition file?

Writing A File When Exception Occurs

Similar Messages

Maybe you are looking for