Writing a User exit for a Variable in Bex Query

Hi Guys,
I need some urgent help on this. I appreciate your help.
I have a variable ZVAR1 ( Store id) in a query. This processing type is manual entry.
There is another variable ZVAR2 (0Orgunit). The value in ZVAR2 should be populated by converting the ZVAR1 value that the user entered.
The master data 0orgunit has the marriage between these two.
So i guess I need to write a user exit to populate ZVAR2 from ZVAR1. How can I do that.
Please help me out on this.
Thanks a lot,

Hi,
You can read the value of ZVAR1 from I_T_VAR_RANGE in your exit coding.
Then perform the required manipulation to populate ZVAR2.
Thanks,
Balaji

Similar Messages

User exit for Date variable in Bex

Hi All,
I have a report based on an ODS which displays employee and its records. 'BegDate' is the only field in the variable selection screen. The requirement is to display all the records for which the 'Begdate' should be less than equal to the given date(in the variable selection screen). Obviously, I need to go with a user exit in background. I want to know -
1. What should be the properties that has to be set to the date variable ?(I need only one selection box and not two which we generally have for ranges)
2. Based on the date, how should I fetch the records? I need to fetch it from the active table of my ODS ?
3. What is the correct syntax? I am getting some different results through my exit. Please specify the exit code clearly.
Regards,
Srinivas

Why do you want to have an exit for this? As far as I understood you have a variable which contains a single date and you want to display all entrys where a given InfoObject has a value less than or equal to the value.
You can do this the following way.
Choose Restrict on your InfoObject
Right at the top there is a box where you can choose Value ranges (or similar, only have the German client at hand)
Next you get three boxes at the right middle side. Choose Less than or Equal in the top of the three. One of the boxes disappears.
Press the button with the two squares right besides the lower box.
In the drop down box at the top you can choose variables. Finally select the standard single value variable you want to use.
Best regards
Dirk

User exit for string input in a query

Hi All,
I am writing a query where the user would enter a string for materials, depending on which all those materials which match that pattern should be displayed in the result set of the query.
This report is to display the stock value of all such materials.
I want to write a user exit for the same but have no knowledge of how to do it.
Pl help me with the code and some documents on writing a user exit.
Thanks,
Sharmishtha

You have to write Customer Exit for it.
Take help of this how to guide:
https://websmp103.sap-ag.de/~sapdownload/011000358700002762582003E/HowToDeriveVariableValue.pdf
Basically nur exit code you have to make use of CP (compare pattern) in opt paramter of code:
http://help.sap.com/saphelp_nw04s/helpdata/en/1d/ca10d858c2e949ba4a152c44f8128a/content.htm

How to Write a CUstomer Exit for a variable in BEx

Hi,
How to write a customer exit variable in bex Query designer
Do i need developers key for this (If so what type of key do i need so that i can ask basis tean to generate)
Info Object: ZEXP_DTE (Expiry Date)
Variable on ZEXP_DTE :
ZEDTE
Type: Customer Exit
Can any one please tell me how to write a code in CMOD from this (Step-by Step)
Expiry Date > Current Cal Day
As arun said
'l_s_range-low = SY-DATUM.
l_s_range-opt = 'I'.
l_s_range-sign = 'GT'.
APPEND l_s_range TO e_t_range.'
I want to insert the above code for the above customer exit but as i am new to BW as ABAP please explain me what are the steps involved in CMOD
Thanks

Hi,
To write customer exit for a variable, you require Access key.
Contact your BASIS to get that.
Access Key,BASIS?
To write Customer exit,
User Exits
User Exit for Variable
/thread/809285 [original link is broken]
Hope these helps u...
Regards,
KK.

How to edit the properties for existing variables in BEX query, so that I can get multiple input selections

Dear fellow developers,
I'm trying to edit an existing variable using BEX query, so that it can allow multiple input selections.
As you can see in the screenshot attached, the option is selectable during creation.
However, during editing of an existing field, this field (Details -> Basic Settings -> Variable Represents) is not selectable.
Does anyone knows why, and how to remedy this?

Yes you can do it at the table level.
Go to SE11 enter table name as RSZGLOBV.
Enter the technical name of variable in VNAM field..You need to change the value in VPARSEL column.
Please make sure to get the where used list of this variable so that you can know the impact,if something goes wrong.
Also change it in DEV and then transport across the landscape.
PS:Same thing has been described in this blog as well
Changing BI variable parameters
Regards,
AL
Message was edited by: Anshu Lilhori

User Exit for Global Variables

Hello Gurus,
Which is the user exit where I can sed the code for the global variables
for eg:
0CYTLM - Cummulated to last month
If I want to write my own code, is it the same exit
thanks in advance

some docs may useful
http://help.sap.com/saphelp_nw04/helpdata/en/5c/8db0be555411d189660000e829fbbd/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a56f5e09411d2acb90000e829fbfe/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a49bd590-0201-0010-51b9-ea4295036979
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f1a7e790-0201-0010-0a8d-f08a4662562d
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/db37ce90-0201-0010-3c83-948c94792ae4

Need help in writing code Customer Exit for reporting Variable

Hello Gurus,
I have a requirement.When a authorized user logins to view the report, he should see only customers available in the value help screen.In the value help screen it is displaying all the customers, but data is displayed perfectly fine for the authorized sales rep. By default, Value help screen displaying all the customer numbers.
How can I restrict in the value help screen?
Any help appreciated with points.
Regards,
PNK

Hello PNK,
You can use a variable with Process type Authorization. This enables variables to be filled with values automatically from the user authorization.
http://help.sap.com/saphelp_sem40bw/helpdata/EN/44/599b3c494d8e15e10000000a114084/content.htm
Thanks
Chandran

User Prompt for Date Range in Bex Query Analyzer

I have a workbook that has two queries. The queries both require the user to enter a date range upon refresh. I want the user to be able to hit refresh, enter the date input into the dialog box and then both queries to use this date range for their input. I have seen this in other book, but when I click refresh on my book it only runs the first query. How do I get the second query to use the first queries input?

use the same variable in both the queries. this will let the user enter the date in a single variable and this will refresh both the queries.
rgds, Ghuru

User Exit for For Variable G_Set_Formula_Exit on Report Writer

Hi SAP Experts,
I want to create user exit for formula variable for Cost Center Group with alphanumeric type ( like 1KOSET- but 1KOSET is a set variable). I will use it as one of my row formula in report writer.
There is one alphanumeric user exit example, which is Controlling Area (#S010) in GS13. SAP message said that I can create other alphanumeric user exit by using user exit G_Set_Formula_Exit.
Can someone advice on how to implement this user exit?
Your advice on this issue is highly appreciated.
Thanks,
CW

Hello Ce Wie,
Were you able to implement G_SET_FORMULA_EXIT? I am also very interested on this issue.
Thanks!
Josep

Need Fcode in User Exit For Infotype

Hi,
I am writing a User exit for Infotype 0002 at Customers Site. I need Fcode to realize a specific logic. I am using the exit PBAS0001 for this purpose. can anyone tell me how to I get Fcode so that I can use it in the code ?
Regards,
Suma

Hi Suma,
sorry that i posted the false BAdI.
You have to use HRPAD00INFTY. That is for PA.
The BAdI HRBAS00INFTY is for PD/OM.
Regards
Bernd
But there is no paramter ok_code
Message was edited by:
Bernd Köhn

Funtion Module for user exits for variables used in BEx Queries.

Hi,
This is for BW Query customer exit variable (zvar2) for include ZXRSRU01 and exit :EXIT_SAPLRRS0_001.
Can anyone please suggest the function modules that can be used to do the following.
1)Read value of zvar1 from selection screen whatever
user enters at run time.
2)How to define the zvar2 in the include. zvar2 is the
variable created in BEx to be populated from this
customer exit.
3)How to use case statment where once the value for zvar1
is determined then,
Case zvar1.
when zvar1 = 0 , then zvar2 = 10
when zvar1 = 1 , then zvar2 = 20
3) Assign zvar2 value as computed in the case statement.
Can anyone please help with the code to achieve this.
Any information regarding function modules that can help write user exits for variable reading and input will be greatly helpful.
Thanks
Sarah.

Hi Sarah,
You don't need any FM for your issue.
Please try thie sample code :
DATA: VAR_INPIUT LIKE RRRANGEEXIT.
CASE I_VNAM.
WHEN 'ZVAR2'.
   CLEAR L_S_RANGE.
   IF I_STEP = 2."PROCESSED AFTER VARIABLE INPUT
*Reading value of ZVAR1
    LOOP AT I_T_VAR_RANGE INTO VAR_INPIUT
      WHERE VNAM = 'ZVAR1'.
      CASE VAR_INPIUT-LOW.
*FILLING ZVAR2
       WHEN 0.
          L_S_RANGE-LOW     = 10.
       WHEN 1.
          L_S_RANGE-LOW     = 20.
      ENDCASE.
      L_S_RANGE-SIGN     = 'I'.
      L_S_RANGE-OPT      = 'EQ'.
      APPEND L_S_RANGE TO E_T_RANGE.
      EXIT.
    ENDLOOP.
ENDIF.
ENDCASE.
Hope this helps
Joe

Need Logic for writing the User exit

Hi Gurus,
I am writing the User Exit code to populate the 'Valid to' field in the data source.
Technical Name - DATUB and Type- DATS
I am using the FM 'GET_STPO"
My extract structure has following fields.
MANDT
MATNR
WERKS
STLAN
STLNR
STLAL
STLTY
STLKN
STPOZ
DATUV
IDNRK
PSWRK
MEINS
MENGE
MTART
DISMM
DATUB
I am not getting the DATUB value for some of the BOM Node Numbers(STLKN).
Please suggest me as How Can I write the code?
Thanks a lot.
Shalaka.

Hi ,
You can also try this :
int countold = 0;
int countnew = 0;
int k = 0;
for(int i =0;i<var1.length;i++)
countold = countnew + 1;
countnew = countnew + Integer.parseInt(var1<i>);
for( int j = countold-1 ;j<countnew;j++)
result.addValue(var2[k]);
k++;
result.addContextChange();
Regards,
Ganesh

Urgent: USER exit for W2 Box 13 of Tax reporter 4.7

Hi,
I am working on tax reporter version 4.7 and while printing the W2 forms saw that the Box 13 (selection of Statutory employee or Retirment plan or third party sick pay ) is not ticked. I worked in one of the clients on ECC 6.0 last year whom had a custom user exit for this same box 13 of W2 which used to get ticked on W2 form depending on the logic in that user exit.
I suggested to this present client that an user exit needs to be written, they asked me to write functional specs for the user exit, can someone help me in writing the functional specs for this W2 form Box 13 selection of Tax reporter on 4.7. what do I need to specify and how do i need to write the functional specs reflecting the logic of this Box 13 of W2 form in tax reporter. Please help me guys, its very urgent.
I apprecite your answers.
Thank you so much
Tony

Hi Oscar Romero,
Sorry its an typo error. second range should be 001.2006 to 007.2006.
1. I want to know how to create Multiple Interval(Range) value variable? - I have used selection option and created variable. Is it correct?
2. Pls find my coding.
when 'ZFISCYAC'.
IF I_STEP = 2.
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'ZFYPEROP'. ---> Value entered is 001.2005 - 012.2006
CLEAR L_S_RANGE.
L_S_RANGE-LOW = LOC_VAR_RANGE-LOW(4).
L_S_RANGE-LOW4(3) = LOC_VAR_RANGE-LOW4(3).
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'ZSCENAR'. -
> Value entered 20060804, 20060705.
*concatenate LOC_VAR_RANGE-LOW(4) '0' LOC_VAR_RANGE-LOW+4(2)
*into L_S_RANGE-high.
L_S_RANGE-high = LOC_VAR_RANGE-LOW(4).
L_S_RANGE-high+4(1) = '0'.
L_S_RANGE-high5(2) = LOC_VAR_RANGE-LOW4(2).
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'BT'.
APPEND L_S_RANGE TO E_T_RANGE.
ENDLOOP.
ENDLOOP.
ENDIF.
Final range should be for 20060804, "ZFISCAY" should be from 001.2005 to 008.2006
For 20060705 range should be 001.2005 to 007.2006.
*Coding for Filling variable "Fiscal year/Period Plan Multiple values
when 'ZFISCYPL'.
IF I_STEP = 2.
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'ZSCENAR'.
CLEAR L_S_RANGE.
L_S_RANGE-LOW = LOC_VAR_RANGE-LOW(4).
L_S_RANGE-LOW+4(2) = '00'.
L_S_RANGE-LOW6(1) = LOC_VAR_RANGE-LOW4(2) + 01.
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'ZFYPEROP'.
L_S_RANGE-HIGH = LOC_VAR_RANGE-high(4).
L_S_RANGE-HIGH4(3) = LOC_VAR_RANGE-high4(3).
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'BT'.
APPEND L_S_RANGE TO E_T_RANGE.
ENDLOOP.
ENDLOOP.
ENDIF.
With same variable values entered as above plan value for variable "ZFISCPL" should be of range 009.2006 to 012.2006 for 20060804
Range should be 008.2006 to 012.2006 for 20060705.
Hope this is clear.
Pls answer very urgent.
Thanks.
Bhuvana.

How to find the user-exit for transaction fpp2

Hi experts,
could you help me how can I find the user-exit for transaction fpp2. I tried to after the package, but I did not find it.

Hi,
Use the following program to find user exits of specified code.
*& Tables
TABLES : tstc,     "SAP® Transaction Codes
         tadir,    "Directory of Repository Objects
         modsapt, "SAP® Enhancements - Short Texts
         modact,   "Modifications
         trdir,    "System table TRDIR
         tfdir,    "Function Module
         enlfdir, "Additional Attributes for Function Modules
         tstct.    "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
    WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
       WHERE pgmid    = 'R3TR'
         AND object   = 'PROG'
         AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir
         WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir
          WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir
          WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir
          WHERE pgmid    = 'R3TR'
            AND object   = 'FUGR'
            AND obj_name = enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
Find SAP® Modifications
    SELECT * FROM tadir
      INTO TABLE jtab
      WHERE pgmid    = 'R3TR'
        AND object   = 'SMOD'
        AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
      WHERE sprsl EQ sy-langu
        AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(95) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
      WRITE:/1 sy-vline,
      2 'Exit Name',
      21 sy-vline ,
      22 'Description',
      95 sy-vline.
      WRITE:/(95) sy-uline.
      LOOP AT jtab.
        SELECT SINGLE * FROM modsapt
        WHERE sprsl = sy-langu AND
        name = jtab-obj_name.
        FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
        WRITE:/1 sy-vline,
        2 jtab-obj_name HOTSPOT ON,
        21 sy-vline ,
        22 modsapt-modtext,
        95 sy-vline.
      ENDLOOP.
      WRITE:/(95) sy-uline.
      DESCRIBE TABLE jtab.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No of Exits:' , sy-tfill.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(95) 'No User Exit exists'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
I executed the above program but there are no user exits for the specified Transaction.
Thanks,
Naveen Kumar.

What are the different methods to find the user-exit for any requirement?

Hi Everybody,
What are the different methods to follow to find the user-exit for any requirement?
Thanks & Regards,
Nagaraju Maddi

The following program search all the user exits involved with a T-code:
Selection Text: P_TCODE: Transaction Code to Search
Text Symbols: 001 - Enter the Transaction Code that you want to search through for a User Exit
REPORT z_find_userexit NO STANDARD PAGE HEADING.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP® User Exits exists.
*& Tables
TABLES : tstc,     "SAP® Transaction Codes
         tadir,    "Directory of Repository Objects
         modsapt, "SAP® Enhancements - Short Texts
         modact,   "Modifications
         trdir,    "System table TRDIR
         tfdir,    "Function Module
         enlfdir, "Additional Attributes for Function Modules
         tstct.    "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
* Validate Transaction Code
SELECT SINGLE * FROM tstc
    WHERE tcode EQ p_tcode.
* Find Repository Objects for transaction code
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
       WHERE pgmid    = 'R3TR'
         AND object   = 'PROG'
         AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir
         WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir
          WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir
          WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir
          WHERE pgmid    = 'R3TR'
            AND object   = 'FUGR'
            AND obj_name = enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
* Find SAP® Modifications
    SELECT * FROM tadir
      INTO TABLE jtab
      WHERE pgmid    = 'R3TR'
        AND object   = 'SMOD'
        AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
      WHERE sprsl EQ sy-langu
        AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(95) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
      WRITE:/1 sy-vline,
      2 'Exit Name',
      21 sy-vline ,
      22 'Description',
      95 sy-vline.
      WRITE:/(95) sy-uline.
      LOOP AT jtab.
        SELECT SINGLE * FROM modsapt
        WHERE sprsl = sy-langu AND
        name = jtab-obj_name.
        FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
        WRITE:/1 sy-vline,
        2 jtab-obj_name HOTSPOT ON,
        21 sy-vline ,
        22 modsapt-modtext,
        95 sy-vline.
      ENDLOOP.
      WRITE:/(95) sy-uline.
      DESCRIBE TABLE jtab.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No of Exits:' , sy-tfill.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(95) 'No User Exit exists'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
* Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.

Writing a User exit for a Variable in Bex Query

Similar Messages

Maybe you are looking for