Wrong charakter for separation of numbers (dot instead of comma)

Hi there,
I face the following Problem with BI-Publisher 10.1.3.3.1. I want to have large numbers seperated by commas. There are different ways to do that in different countries. For example, in the usa the money amount 44.00 USD is seperated the following way: 44.00 USD. In Germany, the same money amount is seperated the following way: 44,00 USD (comma instead of dof).
Can someone tell me how to set this in BI-Publisher? I have one instance, where it does the seperation with comma, and another instance where a dot is used - but I can't find the difference in configuration.
Regards
hfr

Thanks shimona. Now I at least understand how it should work. Unfortunately, it does not in reality.
I use the following function:
to_char(sum(nvl(otd.pruefungsgebuehr,0)),'999G999G999G999G990D99') PRUEFUNGSGEBUEHR
I have two BI-Publisher-Instances on two identically configured OC4Js. On both instances that report is deployed and the used datasource points to exactly the same database with the same user.
But on one instance, the result diplayed is "40.00" and on the other instance, the result displayed is "40,00".
The NLS_NUMERIC_CHARACTERS Definition in Database is ".,", so it should not work like I want on both instances (I need the result "40,00").
Best Regards
Hans

Similar Messages

I would like to read a text file in which the decimal numbers are using dots instead of commas. Is there a way of converting this in labVIEW, or how can I get the program to enterpret the figures in the correct way?

The program doest enterpret my figures from the text file in the correct way since the numbers contain dots instead of commas. Is there a way to fix this in labVIEW, or do I have to change the files before reading them in the program? Thanks beforehend!

You must go in the labview option menu, you can select 'use the local
separator' in the front side submenu (LV6i).
If you use the "From Exponential/Fract/Eng" vi, you are able to select this
opton (with a boolean) without changing the labview parameters.
(sorry for my english)
Lange Jerome
FRANCE
"Nina" a ecrit dans le message news:
[email protected]..
> I would like to read a text file in which the decimal numbers are
> using dots instead of commas. Is there a way of converting this in
> labVIEW, or how can I get the program to enterpret the figures in the
> correct way?
>
> The program doest enterpret my figures from the text file in the
> correct way since the numbers contain dots instea
d of commas. Is there
> a way to fix this in labVIEW, or do I have to change the files before
> reading them in the program? Thanks beforehend!

When formatting a date field in a where clause the template put dot instead of comma

Hello to Headstart Workers !
In a query find block the template construct a where clause, in some cases, and i dont know when the template is formatting a date field putting a dot instead of a comma.
Ex.: to_date('19-01-2001'.'DD-MM-YYYY')
Anybody knows why or where the template do this.
Congratulations
Nelson

- We created it using the HS utilities.
- "nls_numeric_character = ,.".
- it onky happen when the field date is not the first field in the where clause.
- i can see the problem just after pressing find button, already in the ls_block in last_query.
- the find_query works normally but cannot edit any line in ls_block.
Hope that i had helping
Regards
Nelson
null

What is the process for separating two numbers?

My phone line has been on my dad's account and we would like to separate them into two accounts so I have my own. Awhile back we went into a Verizon store and they said it had to be done over the phone and we never have got around to doing that. Has this process changed, if not what is the number we need to call? Thanks!

Assumption of Liability process can be completed at a corporate Verizon Wireless store or by calling Customer Support at 1-800-922-0204 from a landline or *611 from the account owner's cell phone.

Displayin of int type variable contains dot instead of comma

I declared a database field as int4 for storing salary.When i enter the records say 23000 it is stored as 23.000
If i give the value as 23500 then also it is stored as 235.00 .Shouldnt there be a comma instead of a dot.

Hi amber,
INT4 is a 4-byte integer. Please use the F1 key to make sure this is for numbers with no decimals only. For salary, an amount field connected with a currency key is the right solution.
And please note that what you see is not what is stored. 23.000 is the typical external representation of 23000 with a dot as thousand separator.
Please take some time to study ABAP basics.
Regards,
Clemens

Separator for floating point numbers

Hello,
I work with oracle 9 and have a problem with the entry of floating point numbers.
The separator for floating point numbers in my data is a point (5.60).
The pre-setting of oracle is a comma (5,60).
By inserting I get the error message:
01722. 00000 - "invalid number"
How can i change this setting
Thanks for Help
F.

Hi,
I'm not sure if I understood your problem, however the NLS_NUMERIC_CHARACTERS variable specifies the characters to use as the group separator and decimal character.
SQL> create table t1 (val number);
Table created.
SQL> select * from nls_session_parameters;
PARAMETER                      VALUE
NLS_LANGUAGE                   AMERICAN
NLS_TERRITORY                  BRAZIL
NLS_CURRENCY                   R$
NLS_ISO_CURRENCY               BRAZIL
NLS_NUMERIC_CHARACTERS ,.
NLS_CALENDAR                   GREGORIAN
NLS_DATE_FORMAT                DD/MM/YYYY
NLS_DATE_LANGUAGE              AMERICAN
NLS_SORT                       BINARY
NLS_TIME_FORMAT                HH24:MI:SSXFF
NLS_TIMESTAMP_FORMAT           DD/MM/RR HH24:MI:SSXFF
NLS_TIME_TZ_FORMAT             HH24:MI:SSXFF TZR
NLS_TIMESTAMP_TZ_FORMAT        DD/MM/RR HH24:MI:SSXFF TZR
NLS_DUAL_CURRENCY              Cr$
NLS_COMP                       BINARY
NLS_LENGTH_SEMANTICS           BYTE
NLS_NCHAR_CONV_EXCP            FALSE
17 rows selected.
SQL> insert into t1 values (1.50);
1 row created.
SQL> select * from t1;
       VAL
       1,5
SQL> alter session set nls_numeric_characters='.,';
Session altered.
SQL> select * from t1;
       VAL
       1.5Cheers
Legatti

I registered the wrong information for my iCloud account--I misspelled and now want to change it. Help is needed to delete the account and start anew.

I registered the the wrong information for my iCloud account--I misspelled the account name. I accidentally spelled blackberry instead of blackbird. How can I change this?

If you don't want to use an alias you'll have to create a new account as you cannot change the @icloud.com address once created. You'll have to create a new ID, verify the ID, then use the ID to create the new account, and migrate your iCloud data to the new account.
If you are currently syncing data with iCloud, begin by saving any photo stream photos to your camera roll as mentioned above. If you are syncing Notes with iCloud, you'll also need to open each of them and email them to yourself so they can be recreated in the new account. Finally, if you are syncing any iWork documents with iCloud, turn off iCloud syncing in your iWork app settings.
Then go to Settings>iCloud, tap Delete Account, and choose Keep on My iPhone when prompted. Then in Settings>iCloud tap Get a Free Apple ID at the bottom, set up your new ID, verify the email address you use to create it by responding to Apple's verification email, then sign in with the new ID to create your new account. Turn on your iCloud sync settings and choose Merge when prompted to upload your data to the new account. When you turn Mail to On you will be prompted to create your new @icloud.com email address. Be carefull to type it correctly as it cannot later be changed.

I wanna dots instead of displaying it as a whole line in Linechart

Hi Folks,
I had one small doubt in the output of this program. The program is related to LineChart..Actually, Im getting the output as Line in the chart, but my requirement is to display only dots instead of displaying as a line...
I just want only displaying as dots at particular name, insteading of getting that whole line from beginning to end...
First of all whether its posiible to get dots or not?? and if it is possible, how??
Here is the code:
package com.home.practise.streams;
import java.awt.BasicStroke;
import java.awt.Color;
import java.awt.Polygon;
import java.awt.Shape;
import java.awt.geom.Rectangle2D;
import org.jfree.chart.ChartFactory;
import org.jfree.chart.ChartPanel;
import org.jfree.chart.JFreeChart;
import org.jfree.chart.axis.NumberAxis;
import org.jfree.chart.plot.CategoryPlot;
import org.jfree.chart.plot.DefaultDrawingSupplier;
import org.jfree.chart.plot.DrawingSupplier;
import org.jfree.chart.plot.PlotOrientation;
import org.jfree.chart.renderer.category.LineAndShapeRenderer;
import org.jfree.data.category.CategoryDataset;
import org.jfree.data.category.DefaultCategoryDataset;
import org.jfree.ui.ApplicationFrame;
import org.jfree.ui.RefineryUtilities;
public class LineChartDemo5 extends ApplicationFrame {
    public LineChartDemo5(final String title) {
        super(title);
        final CategoryDataset dataset = createDataset();
        final JFreeChart chart = createChart(dataset);
        final ChartPanel chartPanel = new ChartPanel(chart);
        chartPanel.setPreferredSize(new java.awt.Dimension(500, 270));
        setContentPane(chartPanel);
    private CategoryDataset createDataset() {
        // row keys...
        final String series1 = "First";
        final String series2 = "Second";
        final String series3 = "Third";
        // column keys...
        final String type1 = "Hari";
        final String type2 = "Chary";
        final String type3 = "Trinetra";
        final String type4 = "Naveen";
        final String type5 = "Type 5";
        final String type6 = "Type 6";
        final String type7 = "Type 7";
        final String type8 = "Type 8";
        // create the dataset...
        final DefaultCategoryDataset dataset = new DefaultCategoryDataset();
        dataset.addValue(0, series1, type1);
        dataset.addValue(0, series1, type2);
        dataset.addValue(1, series1, type3);
        dataset.addValue(1, series1, type4);
        /*dataset.addValue(5.0, series1, type5);
        dataset.addValue(7.0, series1, type6);
        dataset.addValue(7.0, series1, type7);
        dataset.addValue(8.0, series1, type8);*/
        /*dataset.addValue(5.0, series2, type1);
        dataset.addValue(7.0, series2, type2);
        dataset.addValue(6.0, series2, type3);
        dataset.addValue(8.0, series2, type4);
        dataset.addValue(4.0, series2, type5);
        dataset.addValue(4.0, series2, type6);
        dataset.addValue(2.0, series2, type7);
        dataset.addValue(1.0, series2, type8);
        dataset.addValue(4.0, series3, type1);
        dataset.addValue(3.0, series3, type2);
        dataset.addValue(2.0, series3, type3);
        dataset.addValue(3.0, series3, type4);
        dataset.addValue(6.0, series3, type5);
        dataset.addValue(3.0, series3, type6);
        dataset.addValue(4.0, series3, type7);
        dataset.addValue(3.0, series3, type8);*/
        return dataset;
    private JFreeChart createChart(final CategoryDataset dataset) {
        final JFreeChart chart = ChartFactory.createLineChart(
            "visualization",      // chart title
            "Names",                   // domain axis label
            "Gender",                  // range axis label
            dataset,                  // data
            PlotOrientation.VERTICAL, // orientation
            true,                     // include legend
            true,                     // tooltips
            false                     // urls
//        final StandardLegend legend = (StandardLegend) chart.getLegend();
//      legend.setDisplaySeriesShapes(true);
        final Shape[] shapes = new Shape[3];
        int[] xpoints;
        int[] ypoints;
        // right-pointing triangle
        xpoints = new int[] {-3, 3, -3};
        ypoints = new int[] {-3, 0, 3};
        shapes[0] = new Polygon(xpoints, ypoints, 3);
        // vertical rectangle
        shapes[1] = new Rectangle2D.Double(-2, -3, 3, 6);
        // left-pointing triangle
        xpoints = new int[] {-3, 3, 3};
        ypoints = new int[] {0, -3, 3};
        shapes[2] = new Polygon(xpoints, ypoints, 3);
        final DrawingSupplier supplier = new DefaultDrawingSupplier(
            DefaultDrawingSupplier.DEFAULT_PAINT_SEQUENCE,
            DefaultDrawingSupplier.DEFAULT_OUTLINE_PAINT_SEQUENCE,
            DefaultDrawingSupplier.DEFAULT_STROKE_SEQUENCE,
            DefaultDrawingSupplier.DEFAULT_OUTLINE_STROKE_SEQUENCE,
            shapes
        final CategoryPlot plot = chart.getCategoryPlot();
        plot.setDrawingSupplier(supplier);
        chart.setBackgroundPaint(Color.yellow);
        // set the stroke for each series...
        plot.getRenderer().setSeriesStroke(
            0,
            new BasicStroke(
                2.0f, BasicStroke.CAP_ROUND, BasicStroke.JOIN_ROUND,
                1.0f, new float[] {10.0f, 6.0f}, 0.0f
        plot.getRenderer().setSeriesStroke(
            1,
            new BasicStroke(
                2.0f, BasicStroke.CAP_ROUND, BasicStroke.JOIN_ROUND,
                1.0f, new float[] {6.0f, 6.0f}, 0.0f
        plot.getRenderer().setSeriesStroke(
            2,
            new BasicStroke(
                2.0f, BasicStroke.CAP_ROUND, BasicStroke.JOIN_ROUND,
                1.0f, new float[] {2.0f, 6.0f}, 0.0f
        // customise the renderer...
        final LineAndShapeRenderer renderer = (LineAndShapeRenderer) plot.getRenderer();
//        renderer.setDrawShapes(true);
        renderer.setItemLabelsVisible(true);
     //   renderer.setSeriesLinesVisible(0, false);
   //     renderer.setBaseLinesVisible(false);
//      renderer.setBaseShapesVisible(true);
//      renderer.setSeriesLinesVisible(1, true);
//      renderer.setLabelGenerator(new StandardCategoryLabelGenerator());
        // customise the range axis...
        final NumberAxis rangeAxis = (NumberAxis) plot.getRangeAxis();
        rangeAxis.setStandardTickUnits(NumberAxis.createIntegerTickUnits());
        rangeAxis.setAutoRangeIncludesZero(false);
        rangeAxis.setUpperMargin(0.12);
        return chart;
    public static void main(final String[] args) {
        final LineChartDemo5 demo = new LineChartDemo5("Line Chart Demo 5");
        demo.pack();
        RefineryUtilities.centerFrameOnScreen(demo);
        demo.setVisible(true);
}And here is the link, I have just used the above program from this link only
http://www.java2s.com/Code/Java/Chart/JFreeChartLineChartDemo5showingtheuseofacustomdrawingsupplier.htm

It looks like you're using BasicStrokes to create dashed lines
plot.getRenderer().setSeriesStroke(
    0,
    new BasicStroke(
        2.0f, BasicStroke.CAP_ROUND, BasicStroke.JOIN_ROUND,
        1.0f, new float[] {10.0f, 6.0f}, 0.0f
plot.getRenderer().setSeriesStroke(
    1,
    new BasicStroke(
        2.0f, BasicStroke.CAP_ROUND, BasicStroke.JOIN_ROUND,
        1.0f, new float[] {6.0f, 6.0f}, 0.0f
plot.getRenderer().setSeriesStroke(
    2,
    new BasicStroke(
        2.0f, BasicStroke.CAP_ROUND, BasicStroke.JOIN_ROUND,
        1.0f, new float[] {2.0f, 6.0f}, 0.0f
); Is this not what you want? If you want points instead of dashes you just specify *1f* for first argument in the float array
new BasicStroke(...,...,...,...,new float[]{1f,6f},....); That indicates that you want the dashed regions to be ~1 pixel long - that is, a point - and the empty regions between the dashes to be ~6 pixels long.

I'm using apple's bluetooth keyboard and I need an easy way to switch between the text and numbers fields instead of tapping on the screen

I'm using apple's bluetooth keyboard and I need an easy way to switch between the text and numbers fields instead of tapping on the screen

While not in edit mode:
- if start typing numbers, then it enters number mode.
- if start typing text, then it enters text mode.
Using the arrow keys exits edit mode. So this should work for you:
1 Type text into a cell, which enters text mode.
2 Press Return to move to the next cell.
3 Press right arrow key to exit edit mode.
4 Press left arrow key to get back to the cell.
5 Type a number, which enters number mode.
Another method that requires more planning ahead of time is to format the cells as text or number before starting the data entry. Then when you navigate to a cell while in edit mode, you will be in the appropriate mode (without having to exit edit mode).
This all works fine for me. Hopefullly it does for you also.

All tools in Photoshop CS5 not moving smoothly (only making dots instead of lines)

All my tools in Photoshop CS5, including the brush, eraser, healing brush, etc. are only making dots, instead of drawing smooth lines. When using the brush tool, for example, if I click down and drag my mouse to draw something, only the initial dot for where I clicked down gets colored in. Does anyone have any ideas as to why?

Does anything jump out to you that could be causing this problem? Also, my lasso tool doesn't work properly as I can't drag anywhere. The move tool also doesn't work properly. I can click down and drag a layer, but after I release my click, the layer moves back to its previous position. The only way to move any layers is by free-transforming them.

Only 0 serial numbers entered instead of 30

Hi Experts,
I am facing one problem during Usage decision in QA32 TRANSACTION,
After saving the Usage decision , the system saying that +'Only 0 serial numbers entered instead of 30'+,
due to that i am unable to save the usage decision so that goods are not moving from Quality block to unrestricted stocks,
Inception type is 1 in QM set up view, Inspection type 03 is extra added which is not required for this material, is it causing any problem ?.
I have tried to remove this 03 Inspection type but system not allowing as there are stocks exists,
Work scheduling and Gen Plant 1/2 storage view also activated by mistakenly for this material, in these views Serial profile is assigned, which is not there for previous plant ( Rolled out to new plant), now the problem is with new plant material inspection lots, not for all, few of the lots are creating the problem(Only 0 serial numbers entered instead of 30)
I have tried to send the material return to Vendor from Quality block but not success in that,
Can I deactivate views,
Can problem be solved If i remove the Serial number profile
Can I delete inspection type 03 from the material master QM set up view
Can anybody suggest how to trouble shoot the problem
Thanks in advance !!

First check whether serial numbers are attached to the inspection lot or not.
Please check the configuration of the serial number profile in transaction code OIS2.
Yes problem can be solved by Turn off serial number profile
refer
Serial Numbers in QA11 Record Usage Decision

Brush is making dots instead of a line

Last night in CS5 I was playing with the opacity and spacing of the brush, and now I can't get back to a normal brush.
I want just a normal stroke, but the brush is making lots of transparent dots instead.
I've switched to Photoshop Elements 7 for now and everything is fine there, it's only CS5.

Have you tried choosing a different brush preset? (With the Brush tool selected, right-click on your canvas and choose something from the list)
Have you tried resetting the Brush tool? (right-click the brush tool icon in the upper left, next to all the options, and choose "Reset Tool")

When using printer Epson R1900 with Aperture 3 and if I mistakenly choose the wrong paper such as, epson's luster instead of glossy, does that change the exposure? Like make it too dark one or two stops!

When using printer Epson R1900 with Aperture 3 and if I mistakenly choose the wrong paper such as, epson's luster instead of glossy, does that change the exposure? Like make it too dark one or two stops!

Hi,
If you choose the incorrect settings for printing, yes - the print quality will be affected.
Different papers absorb the ink differently, so you can end up with prints that are too light, too dark, or have a colour cast if you make incorrect choices in your Aperture or printer settings.

Dots instead of time/volume bar

Every so often, my ipod nano will show a row of blue dots instead of the bar that shows the time that a track has been playing or the volume. It eventually goes away, but I'm not sure what I did to make it go away. Any suggestions as to what to do to get rid of the dots and make the time/volume bar come back?

That is the rating screen - where you can rate from 0-5 stars for the song that is currently playing. Use the wheel to select the rating, the press the center button to return to the progress bar.
Cheers!
-Bryan

HT1212 my ipad got disable bcoz of entering wrong password for several time and i got the above method but what if i dont have the same computer which i used to sync my ipad

my ipad got disable bcoz of entering wrong password for several time and i got the above method but what if i dont have the same computer which i used to sync my ipad

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Wrong charakter for separation of numbers (dot instead of comma)

Similar Messages

Maybe you are looking for