Wrong consignor address while printing outbound delivery via VL71

Hi SD Gurus,
Consignor address is printed wronly while printing outbound delivery using VL71 for the first time and its printing correctly when printed using VL03N. User is repeating the output in delivery and the repeated output shows correct consignor address in VL71.Why is the consignor address printed wrongly in the first insatnce ?
Please provide your valuable inputs to solve this.
Thanks
Rama

Hi Rama,
If you are saying that such issue happens only on some of the delivery notes while printing thro' VL71, then it is most likely that the delivery number which has this problem will be in the middle of the delivery documents that prints thro VL71. The only way you can recreate the scenario is to repeatedly print deliveries (may be having atleast 10 deliveries one time) thro' VL71 and check. And it should be the problem of flushing out the variable at some point in the ABAP program.
Try and this might help....
Hope this helps...
Thanks
Mukund S

Similar Messages

  • Error while doing outbound delivery against Purchase Order

    hello
    i m getting error while doing Outbound delivery for purchase order as follows
    EKPO-SOBKZ=E; EKPO-UMSOK=_; EKPO-KZBWS<>_ EKPO-KZVBR<>E (Note 305582) not supported (check your entry)
    Message no. M7146, i m not getting wht will be the reason,
    Regards
    NISHJ

    Please go through the note - 305582. It is clearly given the direction.
    Symptom
    You try to post a goods movement for a stock transport order from the unrestricted-use stock into the sales order stock or project stock.
    During the goods issue, the system displays error message M7146 with a text along the lines of "EKPO-SOBKZ=E; EKPO-KZVBR<>E; ... not supported".
    Cause and prerequisites
    In the goods issue for the stock transport order, the system may have to create a stock in transit which is deconstructed during the goods receipt. If the withdrawal takes place from the special stock, it is clear which is the receiving stock.
    However, if the withdrawal is carried out from the unrestricted-use stock ("Collective requirements", controlled by the dependent requirements indicator MARC-SBDKZ in the material master of the issuing plant), this results in the design problem that the control tables of the goods movement do not have any key field for the receiving stock. Therefore, the control for the receiving stock is controlled via the consumption indicator in the account assignment category of the purchase order. The consumption indicator therefore requires a specific default setting (you may have assumed you could change the design of these control tables, however this is not possible).
    Using an inappropriate consumption indicator then causes for the goods issue an incorrect or no stock in transit to be created so that the goods receipt fails.
    Solution
    Implement the program change in accordance with the correction instructions.
    Afterwards implement Note 413908 immediately if this is relevant for your release.

  • Automatic Batch determination while creating outbound delivery

    Hi,
    I have already performed following steps, but still i am facing problem for Automatic Batch determination while creating outbound delivery :
    1.CT01- Creation of Characteristics. ( Define Selection Class )
    2.CL01- change. ( Define Selection Class )
    Add Characteristics in u2018CHARu2019 tab And save .
    3.CU70 u2013 create u2018Sorting Sequenceu2019 and assign characteristics
    4.Batch Search Procedure & Strategy type
    V/C3 u2013 Batch Search Procedure and assign the strategy types
    a.To create condition type T. code V/C1
    b.To create access sequance T. code V/C2
    5.V/C5 - Allocate SD Search Procedure/Activate Check u2013 assign sales organization , order type into Batch search procedure.
    6.V/CL - Activate Automatic Batch Determination in SD - Activate automatic batch det. for delivery item categories u2013 select item category and activate auto batch determination
    7. VCH1 u2013 Create batch search strategy against strategy type as per the access sequence needed.
    Please let me know is there any other step, apart from it.
    Tx
    Uts

    Dear saravanan,
    Re :Check from ur material master view ' Sales: General/Plant Data' that availability check should be 02 and batch management should get activated .
    Done!
    Re: check CT01 - addnl data table name and field name maintained ( which field to be taken for batch determination )
    Done!
    Re:check CL01 - char - is maintained with CT01 char
    Done!
    Re: check from v/c1 'Sort sequence' and Qty proposal 1 are maintained correctly.
    Done!
    Still i am not able to get batch automatically...
    Is there any LIFO or FIFO settings i have to maintain in Material master.
    Pl guide.
    Tx
    Uts

  • Auto Packing in outbound delivery via IDOC

    Hello All,
    I got a requirement for Auto-packing in outbound delivery via IDOC process.
    Can anybody through some light on the above requirement in finding Message type, process code and so on...
    your every suggestion or hint will help me to fulfill the requirement.
    Thanks in advance.
    Best Regards
    Suresh.

    Hi,
    Auto Packing message type: SDPACK
    Process code: SDPA
    Basic type: SDPAID01
    Regards
    Suresh.

  • Exit to set the automatic PGI and picking while creating outbound delivery

    Hi experts,
    Could anybody suggest how to set the automatic PGI and Picking while creating outbound delivery.
    Currently we are settting VBUK-WBSTK field with value C. But PGI is not happening.
    kindly help me.
    Regards,
    Ravi

    Hello Parihar,
    thanks for reply.
    yes we know that "This process of picking and GI involves reducing the stock and allocating the goods to the delivery"
    if you go for Custom program and Use FM WS_DELIVERY_UPDATE, we can do Picking and PGI.
    our requirement is to do pickong and PGI while creating Delivery it self, based on this output types will be processed.

  • Change of sales order address while changing the delivery address

    Hi,
    Problem: Changing delivery address in outbound delivery is changing the originating sales order address for one user while for a different user id the sales order and delivery has their different delivery addresses.
    Scenario:
    1. A new sale order is created and its address for ship to party is modified (to say A1)
    2. Delivery for the sales order is created and the ship to party address is modified (to say A2).
    While executing this scenario with two different users we are getting different result
    For user 1, after step 2 both the sales order and delivery has shipping address as A2
    whereas for user 2, sales order has address A1 and delivery document has address A2
    How can this difference in behaviour be explained?

    Found the solution myself,
    The standard behavior is being modified in the user exits V09A0001 ( Reference/duplicate decision making manual address). Also refer to note 97832 for detailed solution.

  • Error while deleting outbound delivery

    Hi experts,
    To brief about the issue,we are trying to delete outbound delivery created with reference to sales order which was created with wrong line items .We are trying to delete the outbound delivery document but the system is showing the error " Topfile KT-STB2000-C1WW line item 000020 has the following missing components :STB2000-C10007R".BOM is created for the same line item KT-STB2000-C1WW with subcomponets STB2000-C10007R and KT-14000-148R.suggest the solution for the same
    Thanks & Regards
    subhash

    Hi Reazuddin,
    We are concerned only with deleting the OBD.Earlier there was a mismatch between material BOM and OBD sub-componets.The wrong sub-componets were taken from sales order.Later on we realized that we dont want these componets (it was mistake) in OBD since BOM has different components.Later on we realized our mistake and we have sychronized BOM components,Sales order components and OBD components and tried to delete the OBD,but the system gives error as explained in above query.The message number that we received is "ZW024".
    Thanks & Regards
    Subhash

  • Updating Serialnumbers automatically while creating Outbound Delivery

    Hi Experts,
    My requirement is to populate serial numbers automatically while saving the outbound delivery (VL01N).
    I tried with user exits, but I am unable to succeed.
    I am using ECC5.
    Any help would be greatly appreciated.
    Thanks,
    Veera K

    Hi Veera,
    For an example if there is a  need to update some table with delivery number and serial number on saving a delivery:
    in include MV50AFZ1:
    FORM USEREXIT_SAVE_DOCUMENT.
    *{   INSERT <TR#>
    "work structure LIKP has the header info here
    "Use that and fill the required workstructure and update the correponding table
    *}   INSERT
    ENDFORM.

  • Enhancement to change the quantity while creating outbound delivery

    Dear All,
    Is there any enhancement to change the Actual Quantity while creating the Outbound delivery.
    I have tried using the BAdI LE_SHP_DELIVERY_PROC in the method CHANGE_DELIVERY_ITEM. But i am not able to change the quantity. In the runtime it allows me to change the quantity. After saving the document the quantity is not changed.
    I do not know what all are the parameters and fields to be passed to change the quantity. If anyone knows please help me.
    Anyone guide me to do this requireemnt.
    Thanks & Regards,
    M.Ashok kumar.

    Hi Ashok,
    I have a similar issue, i have done the same as you did by changing the fields LFIMG_FLO and LGMNG_FLO.
    But though Delivery qty is getting update but picking qty is remaining the same.
    Suppose when user give Delivery qty as 8 and Pick qty as 8, i am able to change the delivery qty to 5 but not Pick qty to 5.
    can you please let me know how to acheive it.
    Regards,
    Kartheek.

  • Issue while creating Outbound Delivery using Standard BAPI

    Hi all,
    I am trying to create an outbound delivery for a Sales order using the Standard BAPI - BAPI_OUTB_DELIVERY_CREATE_SLS.
    After giving the valid inputs for Sales order no and doc no, am getting an error as "No instance of object type OutboundDelivery has been created. External reference:" But when trying to create manually there is no problem. Please suggest what may be the issue and how to correct it?
    Regards,
    Vimala P

    Hi Vimala,
    I am trying to create outbound delivery using BAPI_OUTB_DELIVERY_CREATE_SLS & BAPI_DELIVERYPROCESSING_EXEC. But no success. Getting "No instance of object type outbound delivery has been created" in return.
    1) Delivery Type
    2) Delivery selection date
    Needs to be passed in import parameters.
    Could you please tell me what are all the parameters to be passed under tables tab in RV_DELIVERY_CREATE?
    Thanks in Advance..
    Regards,
    Rajasekar .M

  • Zero stock available for material while doing outbound delivery

    Hi ,
    System gives error "0 pc of material XXX avaialble" Message no VL150 when we are doing outbound delivery for sales order. But MMBE & MB52 reports shows sales order stock for the same material. This is happening for particular material but the other material which is having same sttings in material masters & sales order & for the same plant is not having problem & OD has been created.
    We are getting this error whiel posting very first outbound delivery for sales order.
    Help to resolve thsi will be appreciated.
    Regards
    Basavaraj Patil

    Hi,
    Run MD04 for the XXX material and ensure there is no other open sales order / Stock transfer orders.
    If appearing, delete it,  if its not applicable and try creating out bound delivery..
    Check if any safety stock is maintained for the said materials in the MRP view at the plant level, you might get similar error message, pl check.
    Regards
    Merwyn

  • Unable to update WADAT_IST in Outbound Delivery via iDoc WHSCON (DELVRY03)

    Processing iDoc WHSCON (DELVRY03) to update an Outbound Delivery and post Goods Issue, the field ACTUAL GI DATE (WADAT_IST) is not updated. I am using segment E1EDT13 of iDoc WHSCON to inform dates.
    Can anyone tell me if there is any other segment, field or qualifier in the structure of of iDoc WHSCON to inform WADAT_IST?
    Thanks in advance.
    Best regards.

    I dont think it is possible to achieve this.  For more information, have a look at the following note:-
    Note 1839738 - Error HUSELECT005 occurs when using existing HU in SHPCON (WHSCON)
    G. Lakshmipathi

  • Error while creatin outbound delivery......

    Hi,
    We have configured material determination process,when we create Sales order,material determination takes place based on the availability on the stock & alternate materials automatically appears if stock of main item is not available.
    But,when I create a outbound delivery for teh same SO,those altenate materials are not appearing.Only main material will appear with zero deliver qty.Item category for main material is TAX & alternate materials is TAPS.
    Kindly let me know what would be the reason,we ahve used standard material determination procedure.
    Regards,
    VKB

    Hi,
    This is the Standar Behaviour of TAX Item category, If you create a sales order with the TAX item category, it will be copied with Zero Qantity as it is a NON-STOCK item category,
    You have to change the item Copy control setting from Sales order to delivery
    Goto Transaction code VTLA and select your Sales order and Delivery as Sorce and Target Documents respectively and choose your Item category as TAX , then select the Details, There you will find  field ORDER REQUIREMENTS As 102 , if you want to get the amount from Sales order it shold be 101
    please try the above and let the form know your feedback
    thanks,
    santosh

  • Where to Authorization check for the plant while creating outbound delivery

    Hi Experts,
    For outbound delivery , the standard program is not doing the authorization check .
    Can i use BADI       *LE_SHP_DELIVERY_PROC *        and the method :     DELIVERY_FINAL_CHECK
    To write Authority-check statement ,
    If the particular is not authorized for any of the plants of the items in the outbound delivery i will throw a error message
    Can i use as above?
    And if i use it has to apply only for outbound delivery?Because for inbound delivery also the same BADI is getting triggered?
    Please suggest.
    Regards
    Ramakrishna L

    Hi,
    Yes you can use the said BAdi and the method if it is triggerd before the SAVE of the Outbound Delivery Order to do the Authorisation Check. In case the code is triggered for all the orders and you want only to restrict for the Outbound Delivery, then check for the Delivery Type (LFART) from the Delivery Header table for only the Outbound Delivery Order.
    Thanks,
    Susanth Swain

  • Strange issue while printing invoice *** delivery challan

    Dear experts,
    I have a strange prob while taking out the printout of invoice ***/delivery challan.
    We have two different locations (plants) A and B.
    In sapscript layout we have defined GRN no and truckno in bottom windows and
    type of invoice on upper part windows.
    We are able to see complete output on preview in DEV,QAS,PRD
    but on PRD when we take printout , part of output gets skipped on printing
    though visible otherwise on preview.
    What could be reason ?

    Aditya,
    Generally you face such problems in HP Printers.
    Are u using HP laser Jet Printer .
    Ok let me generalise the issue , you gotta ask ur basis guy to istall the latest driver for that printer
    this will most probably solve ur problem.
    Remember that once u get the print preview right , its either problem with the Basis or the printer.
    If its a Z layout then ask ur Basis guy to check the internal setting as to at what height he is giving the page skip.
    Regards,
    Ravi Kiran

Maybe you are looking for