Zero stock available for material while doing outbound delivery

Hi ,
System gives error "0 pc of material XXX avaialble" Message no VL150 when we are doing outbound delivery for sales order. But MMBE & MB52 reports shows sales order stock for the same material. This is happening for particular material but the other material which is having same sttings in material masters & sales order & for the same plant is not having problem & OD has been created.
We are getting this error whiel posting very first outbound delivery for sales order.
Help to resolve thsi will be appreciated.
Regards
Basavaraj Patil

Hi,
Run MD04 for the XXX material and ensure there is no other open sales order / Stock transfer orders.
If appearing, delete it, if its not applicable and try creating out bound delivery..
Check if any safety stock is maintained for the said materials in the MRP view at the plant level, you might get similar error message, pl check.
Regards
Merwyn

Similar Messages

Error while doing outbound delivery against Purchase Order

hello
i m getting error while doing Outbound delivery for purchase order as follows
EKPO-SOBKZ=E; EKPO-UMSOK=_; EKPO-KZBWS<>_ EKPO-KZVBR<>E (Note 305582) not supported (check your entry)
Message no. M7146, i m not getting wht will be the reason,
Regards
NISHJ

Please go through the note - 305582. It is clearly given the direction.
Symptom
You try to post a goods movement for a stock transport order from the unrestricted-use stock into the sales order stock or project stock.
During the goods issue, the system displays error message M7146 with a text along the lines of "EKPO-SOBKZ=E; EKPO-KZVBR<>E; ... not supported".
Cause and prerequisites
In the goods issue for the stock transport order, the system may have to create a stock in transit which is deconstructed during the goods receipt. If the withdrawal takes place from the special stock, it is clear which is the receiving stock.
However, if the withdrawal is carried out from the unrestricted-use stock ("Collective requirements", controlled by the dependent requirements indicator MARC-SBDKZ in the material master of the issuing plant), this results in the design problem that the control tables of the goods movement do not have any key field for the receiving stock. Therefore, the control for the receiving stock is controlled via the consumption indicator in the account assignment category of the purchase order. The consumption indicator therefore requires a specific default setting (you may have assumed you could change the design of these control tables, however this is not possible).
Using an inappropriate consumption indicator then causes for the goods issue an incorrect or no stock in transit to be created so that the goods receipt fails.
Solution
Implement the program change in accordance with the correction instructions.
Afterwards implement Note 413908 immediately if this is relevant for your release.

While doing outbound shipment committment error

while doing outbound shipment vi01 (outbound shilment cost we get error Account Assignment to comittment item not supported with this gl account . we have configured it in fmderiver also but still getting this error
REgards
Geeta

Check Note 144169 - (C) Creating commitment items FAQ for better understanding on the said error message.
thanks
G. Lakshmipathi

No retail price available for material MMMM in master conditions

Hi All ,
When running transaction VKU6 to pickup and display price changes for retail price . I am getting this message.
"No retail price available for material <MMMM> in master conditions"
I have already maintained the condition record for retail prices , am not sure what does these Master Conditions refer to.
Kindly give some advice...
thanks!!

Hi
VKU6 is for retail Re-valuation, if you want re-valuation to be done based on retail sales price than MAP then you use this transaction and see the changes here for the stores you selected then you go to VKU7 for automatic revaluation. If you are getting such error means you must be using two step price calculation and ran re-valuation for DC, try using re-valuation for store and you don't get such errors.
Pre-requisite is you should have old and new retail sales price for stores, these prices to be maintained against master condition type like VKP0 and same to be assigned in the list field.
If you are objective is to see only change in sales price then you can use t code VKP2 / VKP3
Best Regards
Swami

ITEM IS NOT RELEVANT FOR BILLING WHILE DOING STO (VF01)

HI
I am getting an error while doing STO in CIN
Item is not relevant for billing while doing VF01 STO proforma invoice JEX with delivery document type NL and item category NLN
I searched the forum but not able to get an appropriate solution for this.
Kindly revert me on the same
Regards
MANOJ

Hi Manoj,
The only reason for the error you are encountering are,
A. The item category missing at the item level in the copying controls from delivery to JEX (billing type)
Kindly check throughly and confirm,
If it is there , then delete the configuration , i.e. item category from the copying controls and do it again.. Even if this do not resolve your issue, ask your technical team to debugg the billing document during creation and check.

Hierarchy for material types does not exist

Hi,
I am doing an intial configuration in SRM 7.0 we have actvated extended classic and PPS activated.
In the first level of configuration ai heve set up the logical systems and the system landscape.
when i am in R3AS
DNL_CUST_BASIS3
DNL_CUST_PROD0
DNL_CUST_PROD1
DNL_CUST_SRVMAS
the above objects wre green when i executed
For the object MATERIAL
I am getting an error
Hierarchy for material types does not exist
Message no. COM_PRODUCT_API000
Diagnosis
Before materials are imported from the ERP system, the material types from the ERP system must exist as categories in CRM/EBP. When the Customizing object DNL_CUST_PROD1 is imported, the material types are imported automatically and created under the category MAT in the category hierarchy R3PRODSTYP (product subtype).
Procedure
Check whether the ERP system material types have been imported successfully and exist as categories.
Proceed
If necessary, import the Customizing object DNL_CUST_PROD1.
Kindly guide me

Hi,
It looks you have not configured the middleware basic settings. Queue should be registered in SMQR transaction.
Please follow the configuration guides in SAP Solution Manager or offline downloaded version in SAP Service Marketplace.
http://service.sap.com/srm-inst
Regards,
Masa

Zero stock check for a bulk storage type

Hi Experts,
We have a requirement to do the zero stock check for a bulk storage type. As a standard SAP it is not allowed to do the zero stock check for a bulk storage type. Is there any way to do this?
Thanks & Regards
Sanpan

Hi Sanpan
I am in a similar boat.
We have a Bulk warehouse with storage types with 'B' putaway strategy. We would also like to instigate zero stock check but get the message Zero stock check not supported in bulk storage areas with storage units
Message no. LT246
Did you find a solution to this? Or have you coded a solution?
Many thanks
Adam.

Automatic Batch determination while creating outbound delivery

Hi,
I have already performed following steps, but still i am facing problem for Automatic Batch determination while creating outbound delivery :
1.CT01- Creation of Characteristics. ( Define Selection Class )
2.CL01- change. ( Define Selection Class )
Add Characteristics in u2018CHARu2019 tab And save .
3.CU70 u2013 create u2018Sorting Sequenceu2019 and assign characteristics
4.Batch Search Procedure & Strategy type
V/C3 u2013 Batch Search Procedure and assign the strategy types
a.To create condition type T. code V/C1
b.To create access sequance T. code V/C2
5.V/C5 - Allocate SD Search Procedure/Activate Check u2013 assign sales organization , order type into Batch search procedure.
6.V/CL - Activate Automatic Batch Determination in SD - Activate automatic batch det. for delivery item categories u2013 select item category and activate auto batch determination
7. VCH1 u2013 Create batch search strategy against strategy type as per the access sequence needed.
Please let me know is there any other step, apart from it.
Tx
Uts

Dear saravanan,
Re :Check from ur material master view ' Sales: General/Plant Data' that availability check should be 02 and batch management should get activated .
Done!
Re: check CT01 - addnl data table name and field name maintained ( which field to be taken for batch determination )
Done!
Re:check CL01 - char - is maintained with CT01 char
Done!
Re: check from v/c1 'Sort sequence' and Qty proposal 1 are maintained correctly.
Done!
Still i am not able to get batch automatically...
Is there any LIFO or FIFO settings i have to maintain in Material master.
Pl guide.
Tx
Uts

Exit to set the automatic PGI and picking while creating outbound delivery

Hi experts,
Could anybody suggest how to set the automatic PGI and Picking while creating outbound delivery.
Currently we are settting VBUK-WBSTK field with value C. But PGI is not happening.
kindly help me.
Regards,
Ravi

Hello Parihar,
thanks for reply.
yes we know that "This process of picking and GI involves reducing the stock and allocating the goods to the delivery"
if you go for Custom program and Use FM WS_DELIVERY_UPDATE, we can do Picking and PGI.
our requirement is to do pickong and PGI while creating Delivery it self, based on this output types will be processed.

Error while doing Rapid delivery confirmation

Hi,
i am encountering the following error while doing rapid delivery confirmation, "set checkbox for rapid confirmation", pls guide me where to set this check box and wat are all the necessary settings need to be done.?
Thanks in Advance,
V.S.Sabitha

Hello ,
There is a field called 'Rapid Confirm' in transaction O4H1. You need the select this first.
Check the link for the prerequisites :
http://help.sap.com/saphelp_oil472/helpdata/en/bf/a007362b89e30ae10000009b38f839/frameset.htm
Regards ,
Jerin Ipe John .

MIGO : How to identify post is for Goods Recipt of outbound delivery.

Hi,
I am working with MIGO Transaction,
My requirement is that while posting the Goods recipt with outbound delivery, If Movement type is not eqaul to 861, display a msg to change movemnet type to 861.
for this requirement I am using the BADI
MB_DOCUMENT_BADI - > MB_DOCUMENT_BEFORE_UPDATE .
My Querry is that How can I Identify that the posting is for Goods reciept with outbound delivery.
thr r three importing parameter for the BADI
MSEG
MKPK
& vm07m.
I try mkpf-tcode2 field.
but for both goods recipt and cancellation , the value of this field is MIGO_GR.
Please help me regarding identification of the same.

Hi,
Goods Receipt normally gets stored in MKPF & MSEG tables..
Regards
Kiran Sure

While doing inbound delivery using VL31N

While doing inbound delivery using the T-code VL31N , am getting the error message " Factory calendar is not recognised "
Guys Please help me out

Hello ,
while doing the PO in the item detail confirmations tab i have selected the inbound delivery ECC and saved .After that i tried to create the inbound delivery for the PO at that time am getting the message 'factory calender is not recognised " .
I have checked in the factory calender which is assigned to controlling area is" K4 "
Please help me out

Wrong consignor address while printing outbound delivery via VL71

Hi SD Gurus,
Consignor address is printed wronly while printing outbound delivery using VL71 for the first time and its printing correctly when printed using VL03N. User is repeating the output in delivery and the repeated output shows correct consignor address in VL71.Why is the consignor address printed wrongly in the first insatnce ?
Please provide your valuable inputs to solve this.
Thanks
Rama

Hi Rama,
If you are saying that such issue happens only on some of the delivery notes while printing thro' VL71, then it is most likely that the delivery number which has this problem will be in the middle of the delivery documents that prints thro VL71. The only way you can recreate the scenario is to repeatedly print deliveries (may be having atleast 10 deliveries one time) thro' VL71 and check. And it should be the problem of flushing out the variable at some point in the ABAP program.
Try and this might help....
Hope this helps...
Thanks
Mukund S

Print GR slip for GR against an Outbound Delivery

Dear Experts,
I have a requirement as below.
Need to print GR slip for GR against an Outbound Delivery in VL02N (for Return Orders)
What setting needs to be done?
I donot see the GR slip check box in VL02N which normally exists in MIGO
However, i need to print GR slip for such GRs in VL02N
please help
regards,
Shetty

Re: Printout during Goods Receipt
See second, fourth reply and final post (which you've already found answer to via another thread).
Regards,
Nick

Different movement types for goods issue via outbound delivery

Hi gurus,
How can I use different movement types for goods issue via outbound delivery?
Thanks&Best Regards,
Burcu

To use different schedule lines, we need different item types and different document types. Is that right?
Is there a user exit in outbound delivery to post goods issue?
Thanks...

Zero stock available for material while doing outbound delivery

Similar Messages

Maybe you are looking for