Wrong text description for exit variable

Hi,
I have a problem with descriptions of variables created on 0FISCPER. I created two exit variables 'Z1' and 'Z2' and the related Function module that reading a custom table (I read the last closed period) build a range. For the first variable the range is 001.2006 to the last closed period. For the second variable the range is from (last closed period + 1) to 012.2006.
The manual layout (dynamic for 0FISCPER) shows for the columns related with the first variable the description of the first period (January), for the other acts the same (May - the first value of second variable)
Values from infocube are selected correctly so the problem seems to be specific of texts.
Thank you in advance,
Andrea

Hi Andrea,
first check if fiscal year variant is restricted to a single value. Then look into the customizing for the FYV. It's possible to maintain texts for periods there, so check if those are correct.
If it still does not work, open a message to SAP support.
Regards,
Marc
SAP NetWeaver RIG

Similar Messages

Wrong description for exit variable

Hi,
I have a problem with descriptions of variables created on 0FISCPER. I created two exit variables 'Z1' and 'Z2' and the related Function module that reading a custom table (I read the last closed period) build a range. For the first variable the range is 001.2006 to the last closed period. For the second variable the range is from (last closed period + 1) to 012.2006.
The manual layout (dynamic for 0FISCPER) shows for the columns related with the first variable the description of the first period (January), for the other acts the same (May - the first value of second variable)
Values from infocube are selected correctly so the problem seems to be specific of texts.
Thank you in advance,
Andrea

Hi Eugene,
thank you very much for your reply. The problem I described arise in BW-BPS trying to build a planning layout with actual and plan periods. So I have two variables on 0FISCPER. In the related Function Modules I select the last closed period from a custom table building two ranges : from 001.2006 to the last closed period for the first variable (actual data) and from (last closed period + 1) to 012.2006 for the second.
Data selection from infocube works correctly, but columns texts are wrong.
ES:
Jan 2006 Jan 2006 Jan 2006 Apr 2006 Apr 2006 .....
Actual Actual Actual Plan Plan
Thank you,
Andrea

Text for Exit Variable Values

Hi
We are populating the variable with the exit function module and I am using this variable as an user restriction of values. When my user opens the input box to select the values of this variable, there not able to see the attributes that are there for that characteristic as well as description of the master data values. The only thing that they are seeing is the key values that are populated by the exit. Can you please let me know what is the reason for this behavior and we are using web excel interface and using BW 3.5 version
Thanks,
Raj.

Hi Guys
I have solved this. I had to select the Planning level in the variable component to populate the text in the variable of type exit.
Thanks,
Raj.

No Authorization To Upload Text file for a Variable

Hi Experts,
I am trying to upload a text file from Multiple Selection screen of a Query in Business Explorer and it gives the error message of 'No Upload Authorization'
An additional Information: I could able to Upload the text file when we were in SP17. Its recently upgraded to SP 21. Does this Upgradation of service pack has any Impact on this??
An idea about this error, PLEASE ?
Many Thanks in Advance.
Cheers,
Krishna

Hi Panagiotis,
Have a look into the Portal Desktop link below.
http://help.sap.com/saphelp_nw70/helpdata/EN/ac/dc4f3eeb684212e10000000a11405a/frameset.htm
Somewhere mid section, you will find Portal Favourites (http://help.sap.com/saphelp_nw70/helpdata/EN/3a/d609e5803111d5992f00508b6b8b11/frameset.htm).
Make sure that Knowledge Management is installed on your system and that you have activated the Add to Portal Favorites property (this entry is displayed in the options menu of your page title bar).
http://help.sap.com/erp2005_ehp_03/helpdata/EN/84/a30a48887d4cb690b4f1754f651ba1/frameset.htm
If all above if set, then checkout the needed activities within the Portal Favourite iview setting.
http://help.sap.com/saphelp_nw70/helpdata/EN/1e/62eae2357c4596bda2476d0a6503e3/frameset.htm
Checkout on both the page title bar Options menu and the context menu of the Detailed Navigation iView display an Add to Portal Favorites item, allowing users to store links to favorites (thats where I believe your missing permission).
The Portal Favorites iView is part of the Knowledge Management installation and is integrated into the portal. Thus if the above steps are done and the settings activated, then your standard user should not see error in the Portal Favourites with the role that you have already assigned to the user.
Also look into Standard User (eu_role), which basic functionality (portal personalization iViews) for the core portal platform and default content for the Knowledge Management and Collaboration capabilities of SAP NetWeaver. By default, the Everyone group in the portal is assigned to this role.
http://help.sap.com/saphelp_nw70/helpdata/EN/47/f0f7415e639c39e10000000a155106/frameset.htm
Hope that helps.
Ray

Search help for OBJECT ID with Text Description for a query

I need to create search help for the field object text in HRP1000 - P1000-STEXT table in an infoset based on LDB PCH. Can anyone help me? I want it to appear on the adhoc query screen.
Thanks,

look at search help FC_RFCDEST. that problem has already been solved with this search help.

ESS iViews HTML Long text description area page

I want to make an HTML for the long text description for an area page.... But how to make it Multi languague? I mean, I attach trhe HTML to the Area Page, and the HTML its on the KM defined by a resource. But this HTML have only one languague... Do I have to do it in Javascript and get the browser locale and transalte the text on the HTML?
could be another way?
Thanks in advance.
Edited by: José Francisco Maldonado Vargas on Jul 15, 2009 10:02 AM

Hi Vivek..
Go to Content admin -> KM Content -> Documents.
Upload ur HTML file here ... in any folder... Open Documents -> Public Documents
then Go to Folder-> New Upload and UPload the document.
Now to get URL of the Document..
From the context menu of the document uploaded, go to Details ->Settings -> Properties
Choose access links -> copy WebDav URL
Cheers!!
Ashutosh

Offset on exit variables on 0FISCPER?

Hi,
We are having an IP environment here. A copy function is supposed to roll forward values from one period to the next. Originally I had developed an exit variable pointing to the target period, and I have set up the copy like that:
From: Target Period -1
To: Target Period
Now it seems IP cannot cope with this. If I develop a separate variable for the source period and do like that it works:
From: Source Period
To: Target Period
How can that be? Can I not use an offset for exit variables (type exit, single value, mandatory, no user input allowed), coding in step 1 of the include?
Many thanks,
Andreas

Hi Andreas,
Why does it seem to you that you cannot use offset in IP? Did you get any error messages - if you did, please post the details. I think you should be able to use offsets to variables, just make sure the variable is created on a standard time characteristic like 0calmonth and is of type 'single value'.

Problem with User exit variable

We're using an user exit variable (var2) for YTD calculation (For getting the first month of current year). It gets value from another exit variable (var1) which has by default value last month of current year(populated in I_step1 from sy-datum). If the user wants he can change the default value of var1. It works fine when the query is executed the first time. But if the user calls the variable screen again, the variable screen does not show var1 in the popup and the user gets an error message that no value could be determined for var2. How can this issue be resolved or is there any other method to satisfy this requirement.
Your help would be appreciated and rewarded.
Thanks & Regards
Hari

Hi Ravi,
Sorry, there's a correction. var2 is used for getting the first month of the year selected by the user in var1. If the user doesn't enter a value for var1, then var2 should take first month of current year from var1 which has by default last month of current year (populated in i_step1 from sy-datum). The user can select the value of var1 according to his requirement. Then var 2 should get first month of the year selected. That's why I'm using two exit variables.
It works fine during the initial run of the query. But when the user clicks on the variable button in the toolbar and executes the query, var1 is not being displayed and an error message No value could be determined for var2 is shown. All other variables used in the query are displayed except var1.
Krzys, Is the option Can be changed in Query Navigation available for Exit variables. I'll check that and get back to you.
Boujema, Thanks for the OSS note.
Thanks
Hari

Populate text description in the open hub destination

Hi SDNers,
I have requirement with open hub destination, i am taking the cube data to SQL server database.
in that scenario i need text description in the cube ,but we can not see the text description data in the cube(because cube can hold dimension data and utmost navigational attributes data but no textual description).
Text data lies out side the cube but i need couples of text description for master data texts.
Do i need to write the code to populate(look-up) the text description from text table.
Can any one suggest an idea.
Thanks,
Satya

Yes, you may want to write a code on transformations from Cube to Open hub to go and get text from Text table of that Info object.
Make sure to create a new IO of lenght equal to Text field in IO and add this new IO in the Open hub and in transformations write a code at field like:
select single TXTSH from /BIC/Txxxxx into wa_text where
key_of_p_table = /bic/source_field
and langu = 'EN'
If sy-subrc = 0.
result = wa_text.
endif.
clear:wa_text

How to create customer exit for characteristic variables and for text vars.

hi friends,
can anybody tell me how to create customer exit for characteristic variables and for text variables in bw ides system.
thanks,
sree

Hi,
Please have a look at:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f1a7e790-0201-0010-0a8d-f08a4662562d
Krzys

Problem in transporting the text elements for user exit EXIT_SAPLV09A_002

Hi All,
I am facing a problem in transporting the text element (text symbol) for the exit EXIT_SAPLV09A_002. It is implemented and transported but the text elements are not transported and even if I try to delete them and then create them again, on activation it doesn't prompts for TO and it version its shows it as local object. I have tried to manually assign the TO by using limu as id of program and rept as type and SAPLXV09 as the name of the object but still it doesn't allows as an error message comes prompting local object cannot be assigned to TO. Kindly suggest solution this problem.
Regards,
Sachin
Edited by: Sachin Dangayach on Nov 15, 2010 4:21 PM

Hello ,
In the Quality after you run the report check in the layout option>display text elements> variables and check what value is displayed for the use exit variable , if it is correct then problem may be in the selection you gave when you run the report if the user exit variable value is wrong , then set a break point in the code and run the report from rsrt and check where the error is.
hope it is clear
assign points if useful

Error in the ABAP Code for Customer Exit Variable

Could you please update me what is the wrong with the below ABAP Code developed for Customer Exit Variable in BW
i created a Variable (ZVWKNO) of Customer Exit,Single Value ,Mandatory and Variable is ready for input
In CMOD i had written the below Code:
When 'ZVWKNO'.
DATA: WEEK(2) TYPE N,
WEEKNO(2) TYPE N.
IF i_step = 1.
l_st_date = SY-DATUM.
CALL FUNCTION 'DATE_GET_WEEK'
EXPORTING
DATE = l_st_date
IMPORTING
WEEK = l_fn_week.
CHECK sy-subrc = 0.
WEEK = l_fn_week+4(2).
If WEEK 0.
WEEKNO = WEEK - 1.
l_s_range-low = WEEKNO.
l_s_range-sign = k_sign_inclusive.
l_s_range-opt = k_option_equals.
APPEND l_s_range to e_t_range.
ENDIF.
ENDIF.
But when i execute the query the default value is not populated with Week-1 No in the variable screen
Please update me what went wrong
Thanks

Case ZVWKNO.                "write this with out comments
When '1'.              "write the value that needs to equal with value in varaible ZVWKNO after when in sungle quotes
DATA: WEEK(2) TYPE N,
WEEKNO(2) TYPE N.
IF i_step = 1.
l_st_date = SY-DATUM.
CALL FUNCTION 'DATE_GET_WEEK'
EXPORTING
DATE = l_st_date
IMPORTING
WEEK = l_fn_week.
CHECK sy-subrc = 0.
WEEK = l_fn_week+4(2).
If WEEK 0.                                    "check this Week Minimum is '01' and Maximum '52'
WEEKNO = WEEK - 1.
l_s_range-low = WEEKNO.
l_s_range-sign = k_sign_inclusive.
l_s_range-opt = k_option_equals.
APPEND l_s_range to e_t_range.
ENDIF.
ENDIF.
Prabhudas

Cannot determine a value for an exit variable in the Formula fn w/p empty

Hi All,
We have an exit variable Z_EX_AR_VAR, the would read a hierarchy node input variable (Z_HN_AREA), which is furthur based on a hierarchy input variable (Z_HR_AREA), and wouuld return the first leaf of it.
We have implemented a input ready query based on this exit variable and it is getting the first node and is input ready and saves the data to the database.
It works well in the query when we have filtered the characteristic with the hier and hier node and the exit variables.
We need to use the same value to be used in the Fox function.
As per the requirement, the Fox function has to process the zero (empty) records.
So, we have customized formula function to process emptry records.
And in the function of type formula function that processes empty records, we have used the following statement.
DATA AR type ZAREA.
AR = VARI ( Z_HN_AREA, HIENM=Z_HR_AREA, 1).
We are getting the following error message:
Cannot determine a value for the variable Z_HN_AREA.
Planning function ended with errors.
What is that we are doing wrong here. Is it with the 'Process Empty Records' function that cannot read the variable.
How come this variable is working in the query and it is not working in the FOX.
We have done the variable to variable binding in the WAD also. Still the same problem.
Any ideas? Thanks in advance.
Best Regards,
- Shashi
Thanks in '

Hi All,
Michael Wolf from SAP confirmed that we cannot use VARiable read functions in the customized Formula function that processes the zero (empty records) as he spoke to SAP AG about the issue.
Hence we have made a work around by creating a valid record using a dummy key figure in the Custom Formula function that processes empty records so that in the next step, the regular Formula function would get executed, where we could access the variable values by using VARV, VARI functions.
Thanks,
- Shashi

Error Message : " No value could be determined for Customer Exit Variable "

Hello BI Experts ,
I have created a "ZYTD_PERIOD" Customer Exit Variable Interval Mandatory and ready for input check mark removed.
The reference character is '0FISCPER' .
I want to have YTD figures when the user enter single Fiscal Year Period for variable 0P_FPER.
So I have written below code in SE37 : EXIT_SAPLRRS0_001 and include program : ZXRSRU01
==================================================================
case i_vnam.
              WHEN 'ZYTD_PERIOD'.
              IF I_STEP = 2.
              LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = '0P_FPER'.
              CLEAR L_S_RANGE.
              L_S_RANGE-LOW0(4) = LOC_VAR_RANGE-LOW0(4).
              L_S_RANGE-LOW+4(3) = '001'.
              L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW.
              L_S_RANGE-SIGN = 'I'.
              L_S_RANGE-OPT = 'BT'.
              APPEND L_S_RANGE TO E_T_RANGE.
              EXIT.
              ENDLOOP.
              ENDIF.
===================================================================
After that I use this 'ZYTD_PERIOD' variable in the query .
Also I have used the variable 0P_FPER in another structure.
When I execute the query by entering the value of 0P_FPER as 010.2009 or any other value ,
I am getting below error message ,
*No value could be determined for variable ZYTDPERIOD*_
Below is details of this Error message ,
Note that I have proper Master and Text data for 0CO_AREA and 0COMP_CODE loaded into BI.
=======================================================================
Diagnosis
This error diagnosis is specific only to the variables 0P_FVAEX or 0P_CTPCA !
Termination message BRAIN 632 appears:
Could not determine value for variable 0P_FVAEX (or 0P_CTPCA).
System Response
1. Operation method of SAP-Exit-Variables 0P_FVAEX or 0P_CTPCA
With queries from the CO application, both SAP-Exit-Variables look for an entry for 'controlling area'. With this controlling area from the selection screen, the SAP-Exit-Variables program reads the attributes for InfoObject 0CO_AREA (controlling area).
With queries from the FI application, the SAP Exit Variable 0P_FVAEX looks for an entry for 'company code'. With this company code from the selection screen, the SAP Exit Variables program reads the attributes for InfoObject 0COMP_CODE (Company Code).
0P_FVAEX determines the fiscal year variant (attribute 0FISCVARNT) from the attributes for 0CO_AREA (CO queries) or 0COMP_CODE (FI queries). 0P_CTPCA determines the currency type of the profit center local currency (attribute 0CURTP_PCA) from the attributes for 0CO_AREA.
2. Cause of Error
The attributes for the controlling area (InfoObject 0CO_AREA) or company code (InfoObject 0COMP_CODE) were not loaded into the BW system, or the attributes for the controlling area are not active in the BW system.
Check whether this is the cause of the error in your BW system. Display the contents of table /bi0/mco_area or /bi0/mcomp_code using transaction se16.
Application CO:
Check whether the attributes 'fiscal year variant' (field FISCVARNT) and 'profit center local currency currency type' (field CURTP_PCA) are filled in the 'A' version (field OBJVERS) for the selected controlling area. If the fiscal year variant in the OBJVERS = 'A' is empty, then the error is with variable 0P_FVAEX. If the currency type of the profit center's local currency in OBJVERS = 'A' is empty, then the error is with variable 0P_CTPCA.
Application FI:
Check whether or not the attribute 'fiscal year variant' (field FISCVARNT) is filled in the 'A' version (field OBJVERS) for the selected controlling area. If the fiscal year variant is empty in OBJVERS= 'A', then the error is with variable 0P_FVAEX.
Procedure
Using InfoSource 0CO_AREA, load the attributes for the controlling area or company code into your BW system.
Afterwards, activate the attribute changes in your BW system. To do this, use transaction rsa1, path 'Tools > Hierarchy/Attribute changes', functions button 'InfoObject list'. Choose InfoObject 0CO_AREA or 0COMP_CODE from this list, and activate the attribute changes.
=====================================================================================
Is there any special settings needed before writing BEx Customer Exit ?
I have already created a project in CMOD and assinged a proper RSR00001
and EXIT_SAPLRRS0_001 and project is active.
Any help please ....
Regards ,
Amol

My Code is as below ,
          case i_vnam.
              WHEN 'ZYTD_PERIOD'.
              IF I_STEP = 2.
              LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = '0P_FPER'.
              CLEAR L_S_RANGE.
              L_S_RANGE-LOW0(4) = LOC_VAR_RANGE-LOW0(4).
              L_S_RANGE-LOW+4(3) = '001'.
              L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW.
              L_S_RANGE-SIGN = 'I'.
              L_S_RANGE-OPT = 'BT'.
              APPEND L_S_RANGE TO E_T_RANGE.
              EXIT.
              ENDLOOP.
              ENDIF.
              ENDCASE.

Defining an exit variable for a specific day based on Fiscal Period

If I do not have Calendar Day time dimension available for reporting is it possible to define a customer exit variable for a specific day. The days are the first and last day of the financial year?
Example
User Input for Fiscal Period: 2009004
The exit is to define a value for 01.01.2009 and 31.12.2008 (end of last year)
Thanks

Hello Niten,
yes it is possible. Procedure:
- add a new column in the report structure
- hide this column
- create a new text variable in this column (for customer exit)
- now you can fill this variable during query execution based on 0FISCPER
You don't want to filter by this variable. Right?
Buy,
André

Wrong text description for exit variable

Similar Messages

Maybe you are looking for