WRT54 G2 Router Can't be accessed over internet

Hi ALL
I am trying to access my WRT54 G2 router using IP address assigned by ISP. But i can't access it. Which means I can access it in my officenetwork using http://192.168.1.1 but can't access from out of the network over internet using ip assigned to it by ISP like http://59.10.28.82
Can some one help why? or what setting do i need to change?
Message Edited by VJV on 20-01-2010 02:46 AM

Check this link to enable Remote Management on the router and to manage your router remotely.

Similar Messages

I was using my wifi last night when I got an error message stating my ip address had been taken over. Then safari stopped working and i can no longer access the internet. I looked at my ip address and it states 000.000.000....can someone please help?

I was using my wifi last night when I got an error message stating my ip address had been taken over. Then safari stopped working and i can no longer access the internet. I looked at my ip address and it states 000.000.000....can someone please help?

Sounds like a bogus pop up. In any case power down your Mac, your modem, your router. Then power back up in 1 minute sequence; modem, router, Mac.

Is there a way to access the web-based setup for my router if I cannot access the internet?

Okay, I need to change the ip address settings on my router. I have a WRT54G Wireless router. I cannot access the internet on my computer connected to the router, and do not know how to change the router settings without accessing the web-based setup page. So, back to my question. Is there a way to access this page if I cannot connect to the internet?

On the back of the router is a small reset switch. Using a paper clip or other small item, press the switch in and hold it for a few seconds. This will reset the router to the default IP address of 192.168.1.1. Enter that address in your web browser, and be sure your computer is attached to the router by an Ethernet cable. Don't attempt to do this using the wireless connection.
Once you have reached the web configuration utility you can change the DHCP settings.
To give your PC a static IP address you will need to open your network connections panel and, assuming your using Windows XP, make the changes from dynamic IP to static there.

Why can't I access the internet and e-mail on wifi in my house, but, I can if I turn wifi off?

Why can't I access the internet and e-mail on wifi in my house, but, I can if I turn wifi off?

Hello srpeters5,
Thank you for the details of the issue you are experiencing with Wi-Fi on your iPhone. You have taken some really good steps to troubleshoot this issue already. I found an article that includes a few additional steps you can try. You can skip any steps you have already taken.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thank you for using Apple Support Communities.
Best,
Sheila M.

Why can one mac access the internet and not the other?

Hi I have just installed a 2nd generation Airport Express base station. I have setup a network and I can connect to it to access the web. Here's the rub, only my Macbook Pro can connect. My Macbook Air cannot connect? A weird error message says (translated from Swedish): Airport has the selfapplied/selfselected IP adress 169.254.67.130 and will not be able to connect to the internet.
Why can one mac access the internet and not the other? Is there something simple that I can do to get more macs to be able to use my Airport Express to access the internet?
Tech details:
Airport Express 2nd generation (just purchased) model 1392
Macbook Pro running 10.8.2
MacBook Air running 10.6.8

It seems the Airbook assigns a dummy IP address so somehow it doesn't reach and receive an IP from the Express. I deleted the previous Express setting restarted the Air connected again, restarted the modem, restarted the Express nothing....
I spoke to the internet provider and the cable modem does not require any username or pw. from the modem to the cable it's one public ip, pure internet is flowing from the modem to the Express but the express doesn't seem to assign any IP address apart from the one assigned to the Macbook Pro.
Do you need a screendump of the settings on the functioning Mac or the faulty one? What settings are you interested in i.e. which tab should it shot?

AE access over internet from PC

is it possible to access a hard drive connected to an Airport Extreme over the internet??
if so, how? I know i can access it over Internet from a Mac

Do you have a WiFi Router for the Internet on your PC ? If so set up WLAN Access Point on your Nokia N8. Refer Pg. No. 100 /101 of the User_Guide ...

Why can't I access the Internet since Firefox updated?

When I went to open Firefox on may laptop I got a box that said - Firefox will start in a minute after it finishes updating (not verbatim). After it opened I can't access the Internet through it or use any of my quick links. It just keeps refreshing to the Firefox homepage.

Okay, lets start over. What is the system you are running?
Win, Mac, Linux . . . . . . Version
What Firefox?
Are other programs accessing the web?
Some problems occurs when your Internet security program was set
to trust the previous version of Firefox, but no longer recognizes your
updated version as trusted. Now how to fix the problem: To allow
Firefox to connect to the Internet again;
* Make sure your Internet security software is up-to-date (i.e. you are running the latest version).
* Remove Firefox from your program's list of trusted or recognized programs. For detailed instructions, see
'''[https://support.mozilla.org/en-US/kb/configure-firewalls-so-firefox-can-access-internet Configure firewalls so that Firefox can access the Internet.]''' {web link}

How can my network access the Internet?

Hi all,
All in GNS3 lab scenario I created.
Hope anybody can shed light on this matter. I have for example a multi area OSPF domain. Like all of my remote sites are in area x, y, and z and all connects to area 0, in the area 0 I have this ASBR 7200 that has an EBGP peer to R1 (ISP) that connects to R2 and R2 connects to R3, which in turn R3 connects back to my ASBR 7200.
I would like to know how can I reach all of the BGP subnets being advertised by R1 (basically the internet) from my remote sites in area x, y and z? As you can see in the topology I am using obviously RFC 1918 addresses on my network and I used all public IP addresses on the BGP routers. I would like to know how I can reach all those for example all 500,000 routes in order for my remote sites to access the internet? I can't redistribute BGP into my OSPF (since it will break). I tried configuring the subnets on my remote sites on the ASBR 7200 using network command, and the BGP routers can see those subnets, but inside my network I cannot see the subnet that I have created in R3 (pretending it's an internet site). What seems to be missing in my config in the ASBR?
Please any inputs gladly appreciated.
Please remove configuration in 3RD_PARTY-7200-ASBR router, I would like to know how can my local sites see loopback 99.99.99.0 in R3 without redistribution into OSPF...
redistribute bgp 65535 subnets

Yes you will need to NAT at some point to go from private to public address space. Here is a basic configuration if you are interested:
interface F8
ip nat inside
interface G0
ip nat outside
ip access-list standard NAT
permit 192.168.11.0 0.0.0.255
ip nat inside source list NAT interface G0 overload

Two EX90 devices can make video calls over Internet with No VCS-C and VCS-E

Dear Experts;
I have just started TelePresence and VCS 2 weeks before by going through cisco docs and videos and I had taken a risk of implementing the infrastructure elements.
We are now implementing Cisco Tele presence with VCS-C, VCS-E TMS,TCS,MCU and End points with Jabber in One setup.
and in another setup CUCM 10.5,UCCX 10.5 IM&P,Jabber with some 10 agents.
Now the question is In our same building in 2nd floor we have one EX90 and in 5th Floor one EX90 and over LAN we can make video calls using IP address.
In the same way is it possible to make a video call between 2 EX90 devices present in different location in the same city over Internet without the involvement of VCS-C and VCS-E.
Appreciate your valuable reply.
Regards
Debashis

The simple answer to that is NO! Where is the EX90 registered to at the moment? Is it on the VCS? or CUCM

I installed 7.1.2 update for my iphone5 and I have problems. I can no longer access the internet on my phone. My wifi is fine, and I've noticed that there is no longer any indication of "LTE" on my phone.

Against my better judgement, I installed update 7.1.2 on my iphone5, and can no longer access the intenet. I've dis some searching for a solution, but nothing works. What has this happened? And how can I fix it?

LTE indicates cellular. Tap Settings > Cellular then switch Cellular Data ON.
If your Wi-Fi is working, then you should be able to access the internet.
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, tap Settings > General > Reset > Reset Network Settings
You will have to re enter your Wi-Fi password.
* No data is lost due to a reset
If nothing above has helped, try here > iOS: Troubleshooting Wi-Fi networks and connections

Why can't I access the internet through Firefox?

I can't access the internet through Firefox. It's worked just fine for several years, but it just randomly quit working. I've tried resetting Firefox, uninstalling an reinstalling it, and allowing Firefox through the firewall.

Did you try to remove the current rules for Firefox in the firewall to make ure to create new rules for the current Firefox release?
Do a malware check with several malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware. 
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page: http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Database access over INTERNET

I have a database on a machine on the INTERNET (say MAC1).
I also have a LAN setup, wherein we access the internet via a proxy server.
I can ping MAC1 from the proxy server on my LAN but as I cannot ping MAC1 from any other machine in the LAN, and hence I am unable to create Net8 connection, and hence could not connect to the server.
Looking for a way around.
Advice..................

The most obvious solution is open a port in the firewall, by default, that is 1521.
Have you considered using a VPN or SSH tunnel? (If your server is *NIX based.)

Why can I not access the internet while i am connect to my WIFI

I am connected to my wifi but it my touch says it cannot access the internet. What can I do. I tried renewing the lease and resetting but nothing works.

Kristy,
Is your iPod configured to sync audiobooks? To check, plug your iPod in and when it appears in iTunes locate it's audibooks tab and make sure it is set to them.
B-rock

After upgrading to the latest version of firefox. I can no longer access the internet and all traces of Mozilla Firefox are gone from my computer. I have no access to the internet, my home page or my e mails. What can be done??

I have been using firefox for years. I downloaded the latest version and at the conclusion of the down load I was refussed access to the internet. Something about Proxy???? I checked my firewalls and security and they said that mozilla was allowed but everytime I attempt to gain access I am refused. I cant access the internet and I cant download another program to access the internet. I uninstalled Firefox and attempted to reinstall but after uninstalling Firefox I have no means to reinstall because there are no traces of it on my computer and I no longer have access to the internet. What do I do? I cant access my e mails, stored messages, favorites etc etc.

No. After I select "Choose" the dialog box expands to provide only three choices. This is a new bug. I have only seen it in the past week or so, but it is maddening. I have observed that, while the Mozilla Foundation focuses on trivialities like which search engine should be the default, the Firefox application becomes buggier and buggier. Most of my family has switched to Chrome, and I will be following shortly. Firefox used to be a great program. Not any more. Getting assistance with a problem has also become very difficult.

WRE54G is already connected to WRT160N Router, but can not get access to internet?

Hello,,,
I have seven of rung expanders WRE54G and all settings i set as this link
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=4104&p_created=11611...
* same wireless SSID name
* same Channle ( What is the difference between the channel number 6 & number 11 for example?)
* security ( i used WPA2 mixed, that is not in WRE54G, so what i should use)
* Each Expander has own IP address as 192.168.1.2 up to 192.168.1.8
Is the gateway mean the main IP of router 192.168.1.1 ?
all those expanders connected with WRT160N ( the Link gets Blue light)
but my laptop can not get the IP address near of any of those expanders, to get the access to the internet!!!!
What is the reason please?
Message Edited by Almowdmer on 11-10-2008 12:42 AM

I am very happy to communicate with you ( I sure i can learn some thing from you my brother )
Your words are true seven the number of expanders is not easy option
or the cause of the success of the wireless network coverage May succeed strengthened,
with one or two, but more than that needs to be a better distributor.
I think I will use RangePlus WRT110 as repeater in some floor where the wireless signal
is not can work, after connecting through the wire with the main router,
and then I can get half the reference from the repeater when i useing the WRE54G expander
What do you think?!!
I put on my experience on this link
http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&thread.id=115808
Message Edited by Almowdmer on 11-16-2008 10:21 PM

WRT54 G2 Router Can't be accessed over internet

Similar Messages

Maybe you are looking for