WRT54GS Not picking up ip address

I have a WRT54GS router, set it up about a year ago, and it's been working all this time just fine. The only thing is that I wanted to modify its settings a couple days ago and forgot the admin password I had set it to. So I reset the router. Should be no big deal but the problem is that it now will not get an ip address from the cable modem (Time Warner). I've powered down the cable modem (and yes I removed the back up battery) and the router and restarted them in prober order. No ip address. Then I updated the firmware on the router, reset the modems and still no ip address from the cable modem. I know that the cable modem's DHCP is working because my lap top can connect to it and get an ip address. The wireless on the router works, and when connected by ethernet to any of the four ports I get an ip address from the router just fine. I've worked with a lot of routers over the years and have never run into a problem like this. I'm stumped. Does anyone have a suggestion?
Thanks,
--Matt

After resetting your router you lost it's configuration and there was a need to re-configure it...
As your Internet Service Providor is Cable(Time Warner) you should always follow this link to re-configure your router...

Similar Messages

  • Capsule Not Picking Up IP Address (among other issues)

    I just received my brand new Time Capsule, and am having a heck of a time getting it working.
    I have an existing network with 3 Express stations. I unplugged them all, plugged in everything to the Time Capsule & cranked it up. In the set up, I asked it to get the settings from my existing network. Well, first it appeared to set up fine but it failed to establish an internet connection, then I couldn't even see it in Airport Utility. I unplugged everything and went back to my old config, and couldn't see any of my Express stations in Airport Utility either until I restarted my iMac.
    So I thought I would try using it to create a brand new network. I reset the Capsule, plugged in just the power, and went through the process of creating a brand new network with the Capsule as the base station. Part way though the process, I plugged in the cable modem to the Capsule. Configured using DHCP, it seemed OK, but it still couldn't establish an internet connection. Then it disappeared from being visible in Airport Utility again. I moved the ethernet connector back to my Express base and all was fine with my old network. I restarted, and still can't see the Capsule as a device in Airport, much less back up to it.
    So I can't get my Capsule to stay visible to Airport Utility for more than 2 minutes, and when it is running, it won't pick up an IP address to connect to an obviously live port.
    Now what? Right now, it's as useless as a brick. Apple used to be so straightforward, but this is anything but.

    After two weeks of trying, I still can't get my Capsule to stay visible to Airport Utility for more than 2 minutes, and when it is running, it still won't pick up an IP address to connect to an obviously live port.
    Since no one on this forum has suggestions for a fix, should I ship it back to the Apple Online store to get my money back?

  • System Not Picking Permitted Payee address when the Main vendor has PO Box.

    Hi,
    When we are doing payments to Permitted Payee ( Vendor ) the system is printing the checks with PO Box ( Post Box no. ) number of the Main vendor .
    But when we deleted the PO Box number field in Main vendor, then the system is printing the check with Permitted payee address.
    When Main vendor number has PO Box field populated with a number, selected credit address ( Permitted Payee address ) will not print on check.
    When there is a Permitted Payee the system has to consider that Permitted Payee address only. But system is not doing like that.
    Please advice what is the problem.
    ( They are paying through APP run ).

    Can you please tell me where it is.
    Thanks for your prompt reply.

  • HT1349 iCloud not picking up my address book

    I am trying to synchronise my iPad with my iMac. I have successfully synchronised my mail and calendar, unfortunately my contacts are not.

    Have you followed Apple's troubleshooting tips? http://support.apple.com/kb/TS3998

  • My MacBook pro airport is not picking up IP address, how do I fix this?

    All this started after an automated update by the computer. Anyone else with this problem?

    As this article says, your device must be turned on, locked, connected to a power source, and WiFi.
    iCloud: iCloud Backup

  • Not picking up ethernet connection

    Hi,
    I am using a WRT54GS. its and old one about 1 years old was working with my SBC Yahoo SpeedStream DSL modem well.
    recently I switched to Cable. Now the CAT5 (rj45)  that comes out from the cable modem works well with my HP n6120 office laptop picks up the Ethernet connection well and I am getting the wired connection with no problem.
    however WRT54GS not picking up the ethernet. internet light is just blinking. as if its pooling but not finding any network. same thing happening if I try to setup it up as a HUB or access point.
    Is there any setup I can change in the router? to make it work.
    I dont understand how come the wired connection working with the laptop and not with WRT54GS. this is a good working model not too much used also.

    Yes I tried with the cable comes with the router and then with another one that is hand made. Wired but someone told me that the ISP is running a 24online client at their end. if true, it probably is tracking my MAC address. Even if that is true, I clone the mac address, that should hv been worked.
    next why the internet light goes off and on at the router, as if its not finding any internet. where as if connected to the PC it just works good.  could there be any other wireing issue.

  • Email Address not picked in email activity

        Hello,
    We are trying to create a outbound email w.r.t Lead (BP has Email address) , now in the outbound email TO field is not populated with Email address of the BP , we have maintained copy control between lead and Outbound email activity too.
    All the other info is getting copied into Outbound email activity.
    Any inputs please?
    Merci
    Sweta

    Hi Swetha,
    Pls check this step once, am not sure this is exactly the solution, but have a try.
    Customer Relationship Management --> Basic Functions --> One-to-One E-Mail -->Assign Transaction Types --
    Or try as below once:
    1. find the Component name of the field
    2.  go to BSP_wd_cmpwb, component structure browser -- views---pick your component view -
         -- Request processing --- DO_PREPARE_OUTPUT  -- double click on ' fill_to_field( )'
    3. it will direct you to teh code, put the break point ''CRM_EMAIL_READ_PARTNER_ADDRESS'' and debug
    Regards

  • WRT54G Wireless Router Will Not Assign a Network Address

    A Linksys WRT54G router will not assign a network address when I access the router using a Linksys WPC600N wireless card. I have the same problem accessing the router with a TRENDnet TEW-621PC wireless adapter. Both wireless adapters are assigned network addresses when I use other wireless routers. Also, I have no problems being assigned a network address when I access the WRT54G router in question using an old 2WIRE 802.11b wireless card.
    I have tried "Repairing" the connection, I have used ipconfig to "release" and "renew" the connection. However, each attempt fails to have a DHCP address assigned.
    I am a visitor at the work location with the connection problem, the router works for others without any issues.
    Thanks

    Well in such case .... you can try few settings on the wireless adapter ....
    If you are using WLAN monitor .....
    Click start >> All programs >> Linksys wireless monitor >> Click on "Profile" >> Delete all profiles >> Click "New" >> Type in the wireless network name >> Click next >> Configure the rest of the wireless settings same as in the router ...
    At last point it shows .... all the configuration settings ...reconfirm that  >> Click on connect ot a network & reboot the computer ...
    After reboot see if it shows connected or not....
    You can also use Static Ip in the configuration ....

  • Reply all not picking up all email addresses

    On a mail list email when I hit "Reply All" Mail app does not pick up all email addresses when composing a response to a non subscribed user.  This also happens when using web mail in Safari.  No problems on iMac.

    last step on the process is a factory restore through itunes to see if its a software glitch, if that doesnt solve it, you iphone may need service
    iTunes: Restoring iOS software

  • I change ISP and use ms explorer to set on to new ISP. Internet options has the new ISP address but Firefox does not pick it up and is still using the old ISP. Can find no way to set firefox to new ISP. How do i do it?

    I changed ISP and used ms explorer to set up on to new ISP. Internet options has the new ISP address but Firefox does not pick it up and is still using the old ISP address. Can find no way to set firefox to new ISP address. How do I do it? edit

    -> Tap ALT key or press F10 to show the Menu Bar
    -> go to Tools Menu -> Options -> Advanced -> Network -> Connection section -> click '''Settings...''' button -> change these settings in accordance with Internet Options settings that work on MS Internet Explorer -> click OK
    Check and tell if its working.

  • Sender file adapter is not picking the file from windows server

    Hi Experts,
    We have a sender file adapter running on Unix server. Now we have changed the source directory path from Unix to Windows in file access parameters.  It is not picking the files from windows directory and not showing any error.
    In this scenario, input file for sender adapter is *.xml and no content conversion.
    Could any one please let me know is there anything needs to changed in file adapter.
    Thanks in advance,
    Sridhar. M

    Sridhar,
    What do you have in the directory path?
    If it is a shared drive in unix then the directory in windows should also be a shared drive from XI system. Else if it is FTP check the address.
    Regards,
    ---Satish

  • Router not picking up modem. (Please Help)

    Hello there, I have been using my linksys e3000 router for almost 2 years... no problems at all..
    But today a storm came and for some reason after the power outage my router no longer seems to pick up singal from my modem... everything will light up...the wifi light.. and the lights '' 1...2..3...4 ''  but the light showing there is internet will not come on at all....everything is setup right... I can't access the Linkys 192.168.1.1 page anymore.... I tried to reset the router to default settings and nothing will happen.... it will not get singal from the modem at all...
    I'm not sure what to do at this point...my internet works fine as I am on here from a direct connection from the modem...so the problem is my router... it will not pick up any form of singal from my modem... I have tried putting in the disc that came with the router...restarting the router....resetting the router... restarting the modem...my pc...nothing will work... is there anything I can do to get my router working again? 
    Thanks for any help. 

    If I am mistaken, your modem’s ip address is probably 192.168.1.XX and that’s the reason why the router’s ip address has been changed to 102.168.1.1. I would suggest that you start from scratch by disconnecting the modem from the router and to reset the router. You can then follow the steps below to manually configure the router based on the internet connection type that you have subscribed.
    Setting up your Linksys router with Cable Internet service using Linksys Smart Wi-Fi
    Setting up your Linksys router for DSL connection using Linksys Smart Wi-Fi 

  • Net.Msmq Binding Not Picking Up Messages in Queue as soon as the application pool gets recycled

    Hi,
    We are trying to implement a wcf service that exposes a net.msmq endpoint.  We are running windows server 2008 R2/IIS 7.5 running on a DOMAIN mode.
    1. Our service is called service.svc and it is deployed under an application called Test in the default website (application pool running under network service)
    2. The url to reach the service webpage is http://machinename/Test/service.svc.
    3. We created a private queue called Test/service.svc and we configured permissions for network service to full control.
    Now, when the application pool is "alive" the service picks up the messages correctly, but as soon as the application pool gets recycled (because of timeout or any other reason), the service stops picking up the messages, that just sit in the queue until the service starts again by browsing to the service webpage (http://machinename/Test/service.svc)
    I know this is a popular question, but I already tried several solutions with no luck (for example, we triedhttp://keithelder.net/blog/archive/2009/06/03/fix-for-wcf-netmsmqbinding-not-picking-up-messages-in-queue.aspx,http://www.codewrecks.com/blog/index.php/2009/03/17/hosting-a-wcf-service-based-on-msmq-in-iis7/,http://social.msdn.microsoft.com/Forums/en-US/wcf/thread/a1df55c4-e642-442a-9057-f0aec278d10c/ and other ones)
    Any Help?
    If this post is helpful, please mark it as such
    Alessandro Cardoso
    MVP | Microsoft Heroes | MCT
    blog: http://itaustralia.spaces.live.com
    http://cardosoalessandro.spaces.live.com

    Hi Steven,
    I am Alessandro's colleague, I am working with him on these net.msmq issues. 
    Our configuration includes a transactional queue called Test/Service.svc (unauthenticated,
    we shut down all security for the moment...does it matter?) and these attributes on the service:
    [ServiceContract]
    public interface IService
    [OperationContract(IsOneWay=true)]
    void ProcessMyMessage(MyClass parameter);
    [ServiceBehavior(InstanceContextMode = InstanceContextMode.PerCall, TransactionIsolationLevel = IsolationLevel.Serializable, TransactionTimeout = "00:03:00")]
    public class Service: IService
    [OperationBehavior(TransactionScopeRequired = true, TransactionAutoComplete = true)]
    public void ProcessMyMessage(MyClass parameter)
    //Do some stuff here
    The service is hosted on IIS 7.5 under an application called Test (so that the full http address of the service is http://machine/Test/Service.svc).
    In the configuration (for both client and service) we specified None for the security mode, "true" value in durable and exactlyOnce
    The Net.msmq Listener Adapter windows service is running fine under the Network Service account (the same as our application pool)
    Is there something we are missing?
    Also, can you explain how a transaction not configured properly can create this behaviour? In my understanding the process of delivering a message happens in 3 steps (I remember a nice picture of this the Juval Lowy book):
    1) Transaction 1: client delivers message to local instance of msmq. The transaction rolls back if the message does not get delivered.
    2) Transaction 2: the local instance of msmq delivers the message to the remote (service) instance of msmq. The transaction rolls back if the message does not get delivered.
    3) Transaction 3: wcf activates my service which picks up the message and process it. The transaction rolls back if the service fails to pick up the message or does not complete the transaction (for example, because of an unhandled exception).
    The message gets delivered to the service machine successfully, so I am assuming that steps 1 and 2 are executed correctly. If my service was not configured to handle transaction properly, wcf should still activate it and do something with it. Or at least,
    if it doesn't get activated at all, this should be the case even when the application pool is well alive and awake, because it should be a configuration problem. Instead, the service works great if the appPool is alive and it never gets activated when the
    appPool is sleeping (absolute nothing in the .svclog trace file generated by the service). Am I saying something wrong?

  • JMS sender adapter is not picking up message from MQ

    Hi Experts,
    I have configured the JMS sender adapter for getting message from Websphere MQ. In RWB the adapter and the communicaiton channel all looking good. The trace file tells me the connection to the queue has been established.
    But the problem is this JMS sender adapter is not picking up message from the Queue defined on the MQ site.
    Any Idea what could be wrong?
    Thanks!
    Jason
    Jason

    Hi,
    1) Can you activate the JMS adapter again ( edit save and activate it )
    2) Check whether the right Queue is addressed.
    Regards
    Agasthuri Doss

  • Import Server not picking up the file

    Hello,
    I have 2 repositories running on the same server. Import server picks up file for one repository, but not for the other. What could be the reason? Also, for the repository, import server not picking up the file, workflow also does not send an email notification.
    Please help
    Subhash

    Hi Subhash,
    Hope you are not using the same Import Server for both the MDM Servers. If yes then you need to mention the MDM Sevrer name in the MDM Server parameter of MDIS.ini. Check the parameter list of MDIS.ini file.
    If your repository has password for Admin user then you need to specify the same in MDIS.ini file under your repository section for User = Admin and Passowrd = [Admin password]. Remove the E from the PAsswordE and give the password for Admin user. Once done restart the Import Server and check again, parameter Password would have converted to PasswordE.
    For Email Notification two things you need to check:
    1. You should have specified the mail server address in MDS.ini file under your repository section for parameter Mail Server.
    2. Workflow owner should have entry in Email address field of the user. Check this in Console under Admin -> Users.
    Regards,
    Jitesh Talreja

Maybe you are looking for