WRTU54G-TM Changed 3 routers and still suffering T-mobile at home issue?

Where should i start my story?
I took T-mobile at home linksys router on July 10th. On that day i got a temp phone number.  I configured the whole process and things looked fine for a few days (during this period we did not use the phone much, because we had cox phone)
on August 1st the phone number got ported and then the troubles began.
This time when i configured the whole thing the blue light started BLINKING instead of a steady light, but still i had my phone working. But after 30 minutes or so the internet connection and phone were dead. I rebooted both my modem and router (power off on) and the blue light BLINKS again and the internet and phone worked fine for another 30 minutes. I was on phone with the t-mobile tech support and Linksys support for God knows how many hours (mostly on hold). i was told to download the new firmware but on the website i could not find any firmware. I was asked to exchange the router and i did. the second router was funny, this time i did not get any blue light. The linksys status/voice window shows no_simcard. again i was with the tech support for many more hours. After 3 hours this morning they asked me to change the router again. I exchanged the router again this evening (third one) configured the process and this time the light BLINKS again and the Internet and phone drops in just 10 minutes (improvement HA). I went to the linksys site and downloaded the new firmware and then configured the process again.
NO CHANGE the light BLINKS and the internet and phone are dead in 10 minutes. THIS wasted my whole weekend and today. I think it is time for me to give up. I am returning the whole stuff tomorrow and say good-bye to T-mobile home.
Good luck guys (if you have any suggestions let me know)
Thanks
Feroz

UPDATE:
i talked to the t-mobile rep.
the blue light blinks because the phone account has message. i dialed 123 from home phone and checked the voice messages and once i checked them, the blue light stipped blinking and it is stable.
I downloaded the firmware upgrade and updated the firmware.
to my surprise Internet and phone are still on and working. I am keeping my fingers crossed.
i will post an update tomorrow.
-Feroz

Similar Messages

  • IPhone is plugged in to my laptop and is charging but will not sync. The phone logo doesn't appear in the right hand corner.  i have updated itunes restarted both phone and laptop, changed connectors and still nothing. help?

    IPhone is plugged in to my laptop and is charging but will not sync. The phone logo doesn't appear in the right hand corner.  i have updated itunes restarted both phone and laptop, changed connectors and still nothing. help?

    Same thing happened to me, nothing is working. I've updated everything, restarted everything, nothing seems to work.

  • My apple Id has been disabled. I have relogged on changed password and still can not get it to work on my Iphone

    My apple Id has been disabled. I have relogged on changed password and still can not get it to work on my Iphone

    Contact itunes support.  Click Contact Us at the bottom of this page.

  • The apple id password will not activate when I sign in and I do not get a email. I have changed password and still nothing

    The apple id password will not activate when I sign in and I do not recieve the email when I check mail on my Ipod.  I have changed password and still nothing.

    I would go here:
    http://www.apple.com/support/appleid/

  • Powerbook g4 charger not working, changed fuse and still no luck

    I've got a powerbook g4 laptop. A few nights ago the charger just stopped working. The wire is totally intact and we have tried changing the fuse within the plug but it keeps fusing out and still not working. I really don't want to buy a new charger as I've bought at least 6 over the last 5 years (through the wire fraying) AND replaced the battery once already. Is there anything I can do to fix it?
    Thanks!

    You must be remarkably hard on your adapter cords. I packed my Powerbook and adapter up and unpacked them again at least daily for six years and my original adapter is still working fine.
    If the port to which the adapter cord connects in your Powerbook is at all loose or wobbly, your DC-in card is shot, and that may explain why your fuse keeps blowing. If you're in the habit of tripping over your adapter cord, that would explain both the long sequence of ruined adapters and a broken DC-in port/card in the computer.
    Unless you plan to treat your adapter more gently in the future, buying an inexpensive third-party adapter instead of an Apple unit would be a good idea.
    http://eshop.macsales.com/item/Other%20World%20Computing/ACADPTG4/
    Message was edited by: eww

  • Changed routers and now home sharing libraries are not found.

    I have recently changed routers in my home and now my home sharing library is not found . I have checked IP address I have connection and when home sharing is turned on the nextwork name pops up on the screen. however none of my movies or libraries are there and it times out. All worked fine before I changed the router and the only reason I changed was due to the old router being 15 years old and I would loose connection about every 15 to 30 min when streaming. please help Apple support says it the router , router support says its apple, router is NETGEAR N60 Duel Band

    Welcome to the Apple Community.
    It may be your router settings, but as you were having some issues prior to changing your router, it may well be interference, start by trying a different wifi channel.

  • Changed Trackpad and still no joy

    Hi,
    I'm hoping someone can help I have a Curve 8520 and  have had the usual trackpad problems the first time I changed it and it worked well for about 6 months then started to go again so I changed it again. Tis was about 3 months ago and now it has given up on me. I have tried changing the trackpad again but with no joy. Has anyone got any suggestions or suffered this problem?
    Thanks

    Hi
    Check that the torque screw has not loosened.
    I assume that you have pulled the battery while powered-on.
    Please decribe the latest symptoms? Are these the same as before? Have you ruled-out interference from an app?
    Blackberry Best Advice - Back-up weekly
    If I have helped you please check the "Kudos" star on the right >>>>

  • CHANGED PASSWORD AND STILL CANNOT ACCESS ADOBE READER UPDATE

    I HAVE CHANGED MY PASSWORD AND STILL CANNOT ACCESS THE ADOBE READER UPDATE

    I think I may understand. There is no password from Adobe for getting an update. So, I think this is the computer's own administrator password, which you will need when you install most software. You chose it when you turned the computer on the first time. And if you forget it you have bigger problems than Adobe Reader.

  • Changed password and still cannot get connected.

    I am trying to talk toa customer ervice agent....have done everything correctly and still thehchat box ill not come up.  Spent over 2 hours last night trying to connect to a friend in Canada...problem is there are 4 people with his same name....he ws told to change paswrrod and did but still we cannot gt connected...am extremely frustrated at this point!   This was supposed to be easy but it is far from it!!!!!!!!!!!!
    This post was transferred from its previous location to create its own new topic here; its subject and/or title has been edited to differentiate the post from other inquiries and to reflect the post's content. A link to this post appears where the post was originally added.

    I think I may understand. There is no password from Adobe for getting an update. So, I think this is the computer's own administrator password, which you will need when you install most software. You chose it when you turned the computer on the first time. And if you forget it you have bigger problems than Adobe Reader.

  • Password to unlock backup doesnt work - changed passwords and still not accepting - suggestions?

    Password to unlock iphone backup doesnt work, tried new password and still nothing, any suggestions/help?

    If you don't know the password for your encrypted backup, it can no longer be used.  The whole point of encryption is lost if the password can be circumvented.
    Your only choice now is to disable backup encryption and create a new backup. If you need to encrypt the new backup - re-enable encryption and DO NOT LOSE THE PASSWORD.
    iTunes: About iOS backups

  • Changing id and still sharing itunes

    Hi....can I use a different apple ID to my husband for my iphone for messages and still share music/apps?
    We currently use the same Apple ID.
    Thanks

    You're welcome.  Cell phones weren't around when I was a kid either.
    You can still share all your purchased music and other media regardless of what ID is on your devices (in Settings>iTunes and App Stores).  As long as the computer you sync them with is authorized for the ID used to purchase them (in iTunes>Store>Authorize this Computer), you can sync them to your devices.  I was only pointing out that you will still be prompted for the password for the current ID when apps purchased with this ID are updated, so you wouldn't be surprised when this happened.
    You can create new Apple IDs here: https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/wa/createAppleId.  You will need to provide a differnt email account for each ID you create (if you don't have these, you can create free email accounts with Gmail or other email providers).  Apple will send a verification email to the email address you provide.  When you get this, click on the Verify Now link to verify the account.  Once verified, you can enter these in Settings>iTunes & App Stores as I mentioned earlier, after signing out of the current account.

  • I put in the new iso 8.0.2 and my phone wont take my apple id password so i changed it and still the same any body help

    my phone is an s4 i updated it and now wont take my apple id so i changed the password but still not working can someone help

    I went to the link, downloaded straight from there. Said ALL WAS OK.
    Looked at software updates.... STILL said I needed 2.8..?
    Any other ideas?

  • New MacBook- Can't send email. I've changed ports and still the same thing

    Hello. I just got my MacBook and I can receive email fine, but I can't send emails. I read the forums and was advised to change my port from 25 to 587 or 143. I'm not sure how someone determines what port I'm suppose to be using? The error I receive is that port 587 or 143 has timed out.
    Please help. Thank you.

    how are you connected to the internet? try going straight into your modem, could be a port issue on a router
    does your smtp server need authentication? does it use ssl?
    port 587 usually does work if 25 doesn't but those are the 2 main ports used, if neither works verify what port your ISP is using

  • I change password and still cannot log in

    i change rtge passord to log in on Apple TV and I know it works on my i phone for app installation and on this site to log in, but won't work with apple tv, whats up?

    mw too,,what gives?  has worked fine until i turned on homeshare

  • I am a first time user of an ipad. everytime I go to the app store, it will not accept my apple id. I changed it, and still it won't accept it..what do I do? I'm not very computer literate...ty :)

    can anyone help me with this. as a result I can't load any apps..

    thanks for answering...I finally figured it out...it was requiring apple id, and also password....I didn't see that...I have to get used to touching everything...ty for answering.

Maybe you are looking for

  • Customer Ageing analysis by segment

    Hi, The customer ageing report does not give an ageing by segment. Though the standard line item display of the Customer reconcilidation accounts in the NEW GL does contain the paramters for the ageing, unable to find or create a report using the Rep

  • Adding XML Declaration and Document Type Declaration.

    I'm using Oracle's XML Class Generator C++ version 1.0.2.0.0. I can create classes from a defined external DTD and create my XML document. But the document does not contain the XML Declaration <?xml version='1.0?> nor does it contain the Document Typ

  • I have a macbook 13inch late 2008 2.0 Gz and I'm trying to upgrade from os x 10.5.8 to 10.6 how can I?

    I have a macbook 13inch 2008 2.0gz and I'm trying to upgarde from os x 10.5.8 to 10.6 how can I?

  • Visibility button won't work correctly?

    Hello. I am using Adobe Flash Pro CS6. Right now I am trying to make three buttons that show only one movie clip and hide other two movie clips. My layer structure is like this. Button (which has tree button instances) a_mc(wich has a 80 frames movie

  • Contact Center Upgrade SKU

    Hello \, My customer wants to upgrade from Cisco Contact Center Express Upgrade License ver 7.x to ver 10.X . Please what is the sku (Top level Part number) to get this, and also what and what do I look for in getting this? Regards,