WRV200 Web Utility Problem

Hello,
We're using a WRV200. I tried to get to the web utility via 192.168.1.1.
(to be clear, yes I ran ipconfig. that IS the default gateway. and I have released and renewed my PC's ip as well. lol)
The first time I did get the login screen... Great.. Had the wron password so I got the "cannot display page" error in my browser. (IE6 SP2).
So I tried again, but now I don't get the loging screen. It seems to forward me to google search page with results for 192.168.1.1 because the DNS could not resolve it..
Anyone know why this is?
I have checked firewalls, virus scanner settings (just in case), Internet Options security settings..
I'm just baffled at the moment as this should not be happening.
Thanks

Thanks Castor....
It's been a while since I've logged in, but I wanted to post results anyway. (Apologies)
You were right.
It seems the "Web Server" side of the router had hung.
The only difference was I could simply power cycle the router and the web interface came back. I did NOT have to disconnect from the modem or any other devices.
Either I got lucky in that sense (Everything comes back with no config anyway) or it was a fluke...
THANK YOU!!
Sorry it took so long to reply.
Kudos
Joe

Similar Messages

How do I access the web utility with model cisco sf302-08p ?

Hi,i have a problem with the model Cisco SB SF302-08PP Switch , i connect a cable rj45 to my pc and configure the adapter local area connection (ip address:192.168.1.252), the LEDs blink green, and go to the address bar and get the IP by default, which according to the manual is 192.168.1.254 and the result is: page not found. Is there any way to change the web utility? How do I access the web utility?

restore the switch by holding more than 30 seconds and try accessing with ip 192.168.1.254. username and password is "cisco". before change your base ip to 192.168.1.2-253.try to ping and check the connectivity

Fix many web access problems with IFS 9.0.1 on Solaris (and other OS's)...

When the installation is done according to the documentation,
web access does not work because the scripts that add entries to
the jserv.properties file add duplicate references to
wrapper.env and wrapper.classpath. Look at the jserv.properties
file below and look at the remarked-out (#) lines of the
duplicate references. For example, look at the references to the
wrapper.env=LD_LIBRARY_PATH
Oracle, please note this bug so the web access problems are
minimized when the product is intstalled.
Thank you,
William T.
# Apache JServ Configuration
File #
################################ W A R N I N G
# Unlike normal Java properties, JServ configurations have some
important
# extensions:
# 1) commas are used as token separators
# 2) multiple definitions of the same key are concatenated in
a
# comma separated list.
# Execution parameters
# The Java Virtual Machine interpreter.
# Syntax: wrapper.bin=[filename] (String)
# Note: specify a full path if the interpreter is not visible in
your path.
wrapper.bin=/d3/Apache/jdk/bin/java
# Arguments passed to Java interpreter (optional)
# Syntax: wrapper.bin.parameters=[parameters] (String)
# Default: NONE
wrapper.bin.parameters=-Xms64m
wrapper.bin.parameters=-Xmx128m
# Apache JServ entry point class (should not be changed)
# Syntax: wrapper.class=[classname] (String)
# Default: "org.apache.jserv.JServ"
# Arguments passed to main class after the properties filename
(not used)
# Syntax: wrapper.class.parameters=[parameters] (String)
# Default: NONE
# Note: currently not used
# PATH environment value passed to the JVM
# Syntax: wrapper.path=[path] (String)
# Default: "/bin:/usr/bin:/usr/local/bin" for Unix systems
# "c:\(windows-dir);c:\(windows-system-dir)" for Win32
systems
# Notes: if more than one line is supplied these will be
concatenated using
# ":" or ";" (depending wether Unix or Win32) characters
# Under Win32 (windows-dir) and (windows-system-dir) will
be
# automatically evaluated to match your system
requirements
# CLASSPATH environment value passed to the JVM
# Syntax: wrapper.classpath=[path] (String)
# Default: NONE (Sun's JDK/JRE already have a default classpath)
# Note: if more than one line is supplied these will be
concatenated using
# ":" or ";" (depending wether Unix or Win32) characters.
JVM must be
# able to find JSDK and JServ classes and any utility
classes used by
# your servlets.
# Note: the classes you want to be automatically reloaded upon
modification
# MUST NOT be in this classpath or the classpath of the
shell
# you start the Apache from.
wrapper.classpath=/d3/Apache/jdk/lib/tools.jar
wrapper.classpath=/d3/Apache/Jserv/libexec/ApacheJServ.jar
wrapper.classpath=/d3/Apache/Jsdk/lib/jsdk.jar
# An environment name with value passed to the JVM
# Syntax: wrapper.env=[name]=[value] (String)
# Default: NONE on Unix Systems
# SystemDrive and SystemRoot with appropriate values on
Win32 systems
wrapper.env=PATH=/d3/bin
# An environment name with value copied from caller to Java
Virtual Machine
# Syntax: wrapper.env.copy=[name] (String)
# Default: NONE
# Uncomment the following lines to set the default locale and
NLS_LANG
# setting based on the environment variables.
# wrapper.env.copy=LANG
# wrapper.env.copy=NLS_LANG
# Copies all environment from caller to Java Virtual Machine
# Syntax: wrapper.env.copyall=true (boolean)
# Default: false
# Protocol used for signal handling
# Syntax: wrapper.protocol=[name] (String)
# Default: ajpv12
# General parameters
# Set the default IP address or hostname Apache JServ binds (or
listens) to.
# If you have a machine with multiple IP addresses, this address
# will be the one used. If you set the value to localhost, it
# will be resolved to the IP address configured for the locahost
# on your system (generally this is 127.0.0.1). This feature is
so
# that one can have multiple instances of Apache JServ listening
on
# the same port number, but different IP addresses on the same
machine.
# Use bindaddress=* only if you know exactly what you are doing
here,
# as it could let JServ wide open to the internet.
# You must understand that JServ has to answer only to Apache,
and should not
# be reachable by nobody but mod_jserv. So localhost is usually a
# good option. The second best choice would be an internal
network address
# (protected by a firewall) if JServ is running on another
machine than Apache.
# Ask your network admin.
# "*" may be used on boxes where some of the clients get
connected using
# "localhost"and others using another IP addr.
# Syntax: bindaddress=[ipaddress] or [localhost] or [*]
# Default: localhost
bindaddress=localhost
# Set the port Apache JServ listens to.
# Syntax: port=[1024,65535] (int)
# Default: 8007
port=8007
# Servlet Zones parameters
# List of servlet zones Apache JServ manages
# Syntax: zones=[servlet zone],[servlet zone]... (Comma
separated list of String)
# Default: NONE
zones=root
# Configuration file for each servlet zone (one per servlet zone)
# Syntax: [servlet zone name as on the zones list].properties=
[full path to configFile]
(String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
root.properties=/d3/Apache/Jserv/etc/zone.properties
# Thread Pool parameters
# Enables or disables the use of the thread pool.
# Syntax: pool=true (boolean)
# Default: false
# WARNING: the pool has not been extensively tested and may
generate
deadlocks.
# For this reason, we advise against using this code in
production environments.
pool=false
# Indicates the number of idle threads that the pool may contain.
# Syntax: pool.capacity=(int)>0
# Default: 10
# NOTE: depending on your system load, this number should be low
for contantly
# loaded servers and should be increased depending on load
bursts.
pool.capacity=10
# Indicates the pool controller that should be used to control
the
# level of the recycled threads.
# Syntax: pool.controller=[full class of controller] (String)
# Default: org.apache.java.recycle.DefaultController
# NOTE: it is safe to leave this unchanged unless special
recycle behavior
# is needed. Look at the "org.apache.java.recycle" package
javadocs for more
# info on other pool controllers and their behavior.
pool.controller=org.apache.java.recycle.DefaultController
# Security parameters
# Enable/disable the execution of org.apache.jserv.JServ as a
servlet.
# This is disabled by default because it may give informations
that should
# be restricted.
# Note that the execution of Apache JServ as a servlet is
filtered by the web
# server modules by default so that both sides should be enabled
to let this
# service work.
# This service is useful for installation and configuration
since it gives
# feedback about the exact configurations Apache JServ is using,
but it should
# be disabled when both installation and configuration processes
are done.
# Syntax: security.selfservlet=true (boolean)
# Default: false
# WARNING: disable this in a production environment since may
give reserved
# information to untrusted users.
security.selfservlet=true
# Set the maximum number of socket connections Apache JServ may
handle
# simultaneously. Make sure your operating environment has
enough file
# descriptors to allow this number.
# Syntax: security.maxConnections=(int)>1
# Default: 50
security.maxConnections=50
# Backlog setting for very fine performance tunning of JServ.
# Unless you are familiar to sockets leave this value commented
out.
# security.backlog=5
# List of IP addresses allowed to connect to Apache JServ. This
is a first
# security filtering to reject possibly unsecure connections and
avoid the
# overhead of connection authentication.
# <warning>
# (please don't use the following one unless you know what you
are doing :
# security.allowedAddresses=DISABLED
# allows connections on JServ'port from entire internet.)
# You do need only to allow YOUR Apache to talk to JServ.
# </warning>
# Default: 127.0.0.1
# Syntax: security.allowedAddresses=[IP address],[IP Address]...
(Comma
separated list of IP addresses)
#security.allowedAddresses=127.0.0.1
# Enable/disable connection authentication.
# NOTE: unauthenticated connections are a little faster since
authentication
# handshake is not performed at connection creation.
# WARNING: authentication is disabled by default because we
believe that
# connection restriction from all IP addresses but localhost
reduces your
# time to get Apache JServ to run. If you allow other addresses
to connect and
# you don't trust it, you should enable authentication to
prevent untrusted
# execution of your servlets. Beware: if authentication is
disabled and the
# IP address is allowed, everyone on that machine can execute
your servlets!
# Syntax: security.authentication=[true,false] (boolean)
# Default: true
security.authentication=false
# Authentication secret key.
# The secret key is passed as a file that must be kept secure
and must
# be exactly the same of those used by clients to authenticate
themselves.
# Syntax: security.secretKey=[secret key path and filename]
(String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
#security.secretKey=./etc/jserv.secret.key
# Length of the randomly generated challenge string (in bytes)
used to
# authenticate connections. 5 is the lowest possible choice to
force a safe
# level of security and reduce connection creation overhead.
# Syntax: security.challengeSize=(int)>5
# Default: 5
#security.challengeSize=5
# Logging parameters
# Enable/disable Apache JServ logging.
# WARNING: logging is a very expensive operation in terms of
performance. You
# should reduced the generated log to a minumum or even disable
it if fast
# execution is an issue. Note that if all log channels (see
below) are
# enabled, the log may become really big since each servlet
request may
# generate many Kb of log. Some log channels are mainly for
debugging
# purposes and should be disabled in a production environment.
# Syntax: log=[true,false] (boolean)
# Default: true
log=true
# Set the name of the trace/log file. To avoid possible
confusion about
# the location of this file, an absolute pathname is recommended.
# This log file is different than the log file that is in the
# jserv.conf file. This is the log file for the Java portion of
Apache
# JServ.
# On Unix, this file must have write permissions by the owner of
the JVM
# process. In other words, if you are running Apache JServ in
manual mode
# and Apache is running as user nobody, then the file must have
its
# permissions set so that that user can write to it.
# Syntax: log.file=[log path and filename] (String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
log.file=/d3/Apache/Jserv/logs/jserv.log
# Enable the timestamp before the log message
# Syntax: log.timestamp=[true,false] (boolean)
# Default: true
log.timestamp=true
# Use the given string as a data format
# (see java.text.SimpleDateFormat for the list of options)
# Syntax: log.dateFormat=(String)
# Default: [dd/MM/yyyy HH:mm:ss:SSS zz]
log.dateFormat=[dd/MM/yyyy HH:mm:ss:SSS zz]
# Since all the messages logged are processed by a thread
running with
# minimum priority, it's of vital importance that this thread
gets a chance
# to run once in a while. If it doesn't, the log queue overflow
occurs,
# usually resulting in the OutOfMemoryError.
# To prevent this from happening, two parameters are used:
log.queue.maxage
# and log.queue.maxsize. The former defines the maximum time for
the logged
# message to stay in the queue, the latter defines maximum
number of
# messages in the queue.
# If one of those conditions becomes true (age > maxage || size
maxsize),# the log message stating that fact is generated and the log
queue is
# flushed in the separate thread.
# If you ever see such a message, either your system doesn't
live up to its
# expectations or you have a runaway loop (probably, but not
necessarily,
# generating a lot of log messages).
# WARNING: Default values are lousy, you probably want to tweak
them and
# report the results back to the development team.
# Syntax: log.queue.maxage = [milliseconds]
# Default: 5000
log.queue.maxage = 5000
# Syntax: log.queue.maxsize = [integer]
# Default: 1000
log.queue.maxsize = 1000
# Enable/disable logging the channel name
# Default: false
# log.channel=false
# Enable/disable channels, each logging different actions.
# Syntax: log.channel.[channel name]=[true,false] (boolean)
# Default: false
# Info channel - quite a lot of informational messages
# hopefully you don't need them under normal circumstances
# log.channel.info=true
# Servlets exception, i.e. exception caught during
# servlet.service() processing are monitored here
# you probably want to have this one switched on
log.channel.servletException=true
# JServ exception, caught internally in jserv
# we suggest to leave it on
log.channel.jservException=true
# Warning channel, it catches all the important
# messages that don't cause JServ to stop, leave it on
log.channel.warning=true
# Servlet log
# All messages logged by servlets. Probably you want
# this one to be switched on.
log.channel.servletLog=true
# Critical errors
# Messages produced by critical events causing jserv to stop
log.channel.critical=true
# Debug channel
# Only for internal debugging purposes
# log.channel.debug=true
#wrapper.classpath=/d3/ord/jlib/ordim.zip
#wrapper.classpath=/d3/ord/jlib/ordhttp.zip
# Oracle XSQL Servlet
wrapper.classpath=/d3/lib/oraclexsql.jar
# Oracle JDBC
wrapper.classpath=/d3/jdbc/lib/classes12.zip
# Oracle XML Parser V2 (with XSLT Engine)
wrapper.classpath=/d3/lib/xmlparserv2.jar
# Oracle XML SQL Components for Java
wrapper.classpath=/d3/rdbms/jlib/xsu12.jar
# XSQLConfig.xml File location
wrapper.classpath=/d3/xdk/admin
# Oracle BC4J
wrapper.classpath=/d3/ord/jlib/ordim.zip
wrapper.classpath=/d3/ord/jlib/ordvir.zip
wrapper.classpath=/d3/ord/jlib/ordhttp.zip
wrapper.classpath=/d3/BC4J/lib/jndi.jar
wrapper.classpath=/d3/BC4J/lib/jbomt.zip
wrapper.classpath=/d3/BC4J/lib/javax_ejb.zip
wrapper.classpath=/d3/BC4J/lib/jdev-rt.jar
wrapper.classpath=/d3/BC4J/lib/jbohtml.zip
wrapper.classpath=/d3/BC4J/lib/jboremote.zip
wrapper.classpath=/d3/BC4J/lib/jdev-cm.jar
wrapper.classpath=/d3/BC4J/lib/jbodomorcl.zip
wrapper.classpath=/d3/BC4J/lib/jboimdomains.zip
wrapper.classpath=/d3/BC4J/lib/collections.jar
wrapper.classpath=/d3/Apache/Apache/htdocs/onlineorders_html
#wrapper.classpath=/d3/Apache/Apache/htdocs/OnlineOrders_html/Onl
ineOrders.jar
# The following classpath entries are necessary for EJBs to run
in IAS or DB when
present
wrapper.classpath=/d3/lib/aurora_client.jar
wrapper.classpath=/d3/lib/vbjorb.jar
wrapper.classpath=/d3/lib/vbjapp.jar
# Oracle Servlet
wrapper.classpath=/d3/lib/servlet.jar
# Oracle Java Server Pages
wrapper.classpath=/d3/jsp/lib/ojsp.jar
# Oracle Util
wrapper.classpath=/d3/jsp/lib/ojsputil.jar
# Oracle Java SQL
wrapper.classpath=/d3/sqlj/lib/translator.zip
# Oracle JDBC
#wrapper.classpath=/d3/jdbc/lib/classes12.zip
# SQLJ runtime
wrapper.classpath=/d3/sqlj/lib/runtime12.zip
# Oracle Messaging
wrapper.classpath=/d3/rdbms/jlib/aqapi.jar
wrapper.classpath=/d3/rdbms/jlib/jmscommon.jar
# OJSP environment settings
#wrapper.env=ORACLE_HOME=/d3
# The next line should be modified to reflect the value of the
SID for your
webserver.
#wrapper.env=ORACLE_SID=cmpdb
#wrapper.env=LD_LIBRARY_PATH=/d3/lib
## Enable the flag below if you are using jdk 1.2.2_05a or above
#wrapper.env=JAVA_COMPILER=NONE
# Advanced Queuing - AQXML
wrapper.classpath=/d3/rdbms/jlib/aqxml.jar
#wrapper.classpath=/d3/rdbms/jlib/xsu12.jar
#wrapper.classpath=/d3/lib/xmlparserv2.jar
wrapper.classpath=/d3/lib/xschema.jar
#wrapper.classpath=/d3/jlib/jndi.jar
wrapper.classpath=/d3/jlib/jta.jar
oemreporting.properties=/d3/Apache/Jserv/oemreporting/oemreportin
g.properties
zones = root, oemreporting
wrapper.classpath=/d3/jlib/share-opt-1_1_9.zip
wrapper.classpath=/d3/jlib/caboshare-opt-1_0_3.zip
wrapper.classpath=/d3/jlib/marlin-opt-1_0_7.zip
wrapper.classpath=/d3/jlib/tecate-opt-1_0_4.zip
wrapper.classpath=/d3/jlib/ocelot-opt-1_0_2.zip
wrapper.classpath=/d3/jlib/regexp.jar
wrapper.classpath=/d3/jlib/sax2.jar
#wrapper.classpath=/d3/jlib/servlet.jar
wrapper.bin.parameters= -DORACLE_HOME=/d3
#wrapper.env=LD_LIBRARY_PATH=/d3/lib32
wrapper.env.copy=DISPLAY
wrapper.bin.parameters=-DORACLE_HOME=/d3
#wrapper.classpath=/d3/lib/vbjorb.jar
#wrapper.classpath=/d3/lib/vbjapp.jar
wrapper.classpath=/d3/classes/classesFromIDLVisi
wrapper.classpath=/d3/jlib/swingall-1_1_1.jar
wrapper.classpath=/d3/jlib/ewtcompat3_3_15.jar
wrapper.classpath=/d3/jlib/ewt-3_3_18.jar
wrapper.classpath=/d3/jlib/share-1_1_9.jar
wrapper.classpath=/d3/jlib/help-3_2_9.jar
wrapper.classpath=/d3/jlib/ice-5_06_3.jar
wrapper.classpath=/d3/jdbc/lib/classes111.zip
wrapper.classpath=/d3/classes
wrapper.classpath=/d3/jlib/oembase-9_0_1.jar
wrapper.classpath=/d3/jlib/oemtools-9_0_1.jar
wrapper.classpath=/d3/jlib
wrapper.classpath=/d3/jlib/javax-ssl-1_1.jar
wrapper.classpath=/d3/jlib/jssl-1_1.jar
wrapper.classpath=/d3/jlib/netcfg.jar
wrapper.classpath=/d3/jlib/dbui-2_1_2.jar
#wrapper.classpath=/d3/lib/aurora_client.jar
#wrapper.classpath=/d3/lib/xmlparserv2.jar
wrapper.classpath=/d3/network/jlib/netmgrm.jar
wrapper.classpath=/d3/network/jlib/netmgr.jar
wrapper.classpath=/d3/network/tools
wrapper.classpath=/d3/jlib/kodiak-1_2_1.jar
wrapper.classpath=/d3/sysman/jlib/netchart360.jar
wrapper.classpath=/d3/jlib/pfjbean.jar
wrapper.env=SHLIB_PATH=/d3/lib32
wrapper.env=LIBPATH=/d3/lib32
wrapper.classpath=/d3/ultrasearch/lib/isearch_midtier.jar
wrapper.classpath=/d3/ultrasearch/lib/isearch_query.jar
wrapper.classpath=/d3/ultrasearch/lib/jgl3.1.0.jar
wrapper.classpath=/d3/lib/mail.jar
wrapper.classpath=/d3/lib/activation.jar
wrapper.classpath=/d3/ultrasearch/jsp/admin/config
# Additions for iFS
## DO NOT REMOVE OR ALTER THE FOLLOWING LINE ....
# iFS true
# Uncomment if you want to use the same Jserv as other
applications
wrapper.classpath=/d3/9ifs/custom_classes
wrapper.classpath=/d3/9ifs/settings
wrapper.classpath=/d3/9ifs/lib/adk.jar
wrapper.classpath=/d3/9ifs/lib/email.jar
wrapper.classpath=/d3/9ifs/lib/http.jar
wrapper.classpath=/d3/9ifs/lib/release.jar
wrapper.classpath=/d3/9ifs/lib/repos.jar
wrapper.classpath=/d3/9ifs/lib/utils.jar
wrapper.classpath=/d3/9ifs/lib/webui.jar
wrapper.classpath=/d3/9ifs/lib/provider.jar
wrapper.classpath=/d3/jlib/javax-ssl-1_2.jar
wrapper.classpath=/d3/jlib/jssl-1_2.jar
wrapper.env=ORACLE_HOME=/d3
wrapper.env=ORACLE_SID=cmpdb
wrapper.env=LD_LIBRARY_PATH=/d3/lib:/d3/ctx/lib:/d3/lib32
wrapper.env=NLS_LANG=.US7ASCII
## Additions for the iFS zone
# Uncomment if you want to use the same Jserv as other
applications
zones=ifs
ifs.properties=/d3/Apache/Jserv/etc/ifs.properties
# End iFS section

About your home page; Manually set up Firefox with the window(s) and tab(s)
the way you want them to be. Then;
'''''Firefox Options > General > Homepage'''''.
Press the button labeled ''''Use Current'''.'
=====================================
Open a new window or tab. In the address bar, type '''''about:config'''''.
If a warning screen comes up, press the '''''Be Careful''''' button.
This is where Firefox finds information it needs to run.
At the top of the screen is a search bar. Enter '''''browser.newtab.url'''''
and press enter. '''''browser.newtab.url'''''
tells Firefox what to show when a new tab is opened.
If you want, right click and select '''''Modify'''''. You can change the
setting to; about:home (Firefox default home page), 
about:newtab (shows the sites most visited), 
about:blank (a blank page), 
or you can enter any web page you want. 
The same instructions are used for the new window setting, listed as
'''''browser.startup.homepage'''''.

Web Util & Report integration to gather.

Hello all
I have configured webutil and report integration in Developer suite 9i.
and it is working very fine.
now I am upgrading it to 10g.
I have configured web util and it is working fine.
and now I am getting problem to integration for "reports" as follows.
FRM-41213 Unable connect to the report server cyan.
I have developed one form for testing the report integration with form.
but when i am running this form with default configuration of formsweb.cfg then
it is working fine as follows.
http://chirag:8889/forms90/f90servlet?form=c:\temp\chirag&userid=cyan/cyan@cyan
when i am running this form using web util configuration then i am getting
the abouve error.
http://chirag:8889/forms90/f90servlet?config=cyan
but my application in Ds9i have used both webutil and report integration
so i have to find out the same thing in DS 10g.
Following are the code of report integration.
DECLARE
     mreport_other varchar2(4000);
BEGIN
     set_report_object_property('CYAN',REPORT_DESFORMAT,:CONTROL_BLK.REPORT_DESFORMAT);
     mreport_other := 'p_report_title="'||:control_blk.report_title||'" ';
     mreport_other := 'p_user_name="'||'CHIRAG'||'" '||mreport_other;
DECLARE
     report_status     varchar2(30);
     rep_id                    REPORT_OBJECT;
     v_rep                         varchar2(100);
     mreport_file     varchar2(200) := 'C:\CYAN'||:control_blk.report_path;
BEGIN
     rep_id := FIND_REPORT_OBJECT('cyan');
     SET_REPORT_OBJECT_PROPERTY(rep_id,REPORT_SERVER,'cyan');
     SET_REPORT_OBJECT_PROPERTY(rep_id,REPORT_FILENAME,mreport_file);
     SET_REPORT_OBJECT_PROPERTY(rep_id,REPORT_OTHER,mreport_other);
     v_rep := RUN_REPORT_OBJECT(rep_id);
     report_status := report_object_status(v_rep);
     if Report_Status = 'FINISHED' then
          WEB.SHOW_DOCUMENT('http://'||'chirag:8889'||'/reports/rwservlet/getjobid' || substr(v_rep, length('cyan') + 2, length(v_rep)) || '?server=' ||'cyan');
     end if;
END;
END;
formsweb.cfg as follows
[cyan]
BaseHTML=c:\oracle\cyan\server\webutiljini.htm
BaseHTMLJinitiator= c:\oracle\cyan\server\webutiljini.htm
baseHTMLjpi=basejpi.htm
BaseHTMLie=baseie.htm
lookAndFeel=oracle
envFile=C:\oracle\cyan\server\webutil.env
webUtilArchive=/forms90/webutil/webutil.jar,/forms90/webutil/jacob.jar
separateFrame=True
pageTitle=Cyan Ltd
form=C:\cyan\admin\security\forms\cyan_logon.fmx
otherparams=cyan_home=c:\cyan
userid=cyan/cyan@cyan
width=800
height=566
buffer_records=NO
debug_messages=NO
array=YES
query_only=NO
quiet=NO
RENDER=YES
logo=webpage
webutil.env as follows
ORACLE_HOME=C:\oracle\OraDS10g
FORMS90_PATH=C:\cyan\admin\global\forms;C:\cyan\payroll\forms;C:\oracle\cyan\forms
CLASSPATH=c:\oracle\cyan\lib\webutil.jar;c:\oracle\OraDS10g\jlib\debugger.jar;
c:\oracle\OraDS10g\jlib\ewt3.jar;c:\oracle\OraDS10g\jlib\share.jar;
c:\oracle\OraDS10g\jlib\utj90.jar;c:\oracle\OraDS10g\jdk\jre\lib\rt.jar
WEBUTIL_CONFIG=c:\oracle\cyan\server\webutil.cfg
Please assist me to solve this problem
from
Chirag Patel
Nairobi

Hi,
I remember that in 9i we had a problem that required both the Reports and the WebUtil java libraries to be in teh Forms classpath in the default.env. This however should have been fixed in Forms 10g.
For what it is worth, can you try
- In the registry variable "REPORTS_CLASSPATH", add the path of the jar file that will be used by webutil (webutil.jar basically)
- In the default.env file, add the Reports jar (see REPORTS_CLASSPATH for values)files to the classpath of Forms
Frank

Web util install

Hi ,
I've just installed web util,and I'm trying to create a little form to test if is working.
Using 9ids patch 3 on WIn XP.
when running a form with the webutil block attached,a alert message shows up :
WUC-18 Invalid server side file specification http://localhost:8888/forms90/f90servletwebutil/jacob.dll
and the same for the others dll files.
I've created the webutil virtual directory exactly the docs said,and I'm able to download the dll file from
http://localhost:8888/forms90/webutil/jacob.dll
Why is webutil lookoing for a f90servletwebutil virtual directory?
Does the people form ORacle has any ideea why this is happening?

I've just fixed the nls problem,turned on logging for webutil,moved the webutil block to be the first on the form.
I'm not receiving the alert about the dll files any more, webutil information is showing fine ,but the process is failing after,
And,in the bin directory of JInit,there is no jacob.dll,or d2kutil.dll file installed.
HEre is the new output :
Loading http://localhost:8888/forms90/webutil/webutil.jar from JAR cache
Loading http://localhost:8888/forms90/java/f90all_jinit.jar from JAR cache
RegisterWebUtil - Loading Webutil Version 1.0.2 Beta
Loading http://localhost:8888/forms90/java/utils.jar from JAR cache
Loading http://localhost:8888/forms90/java/icos.jar from JAR cache
Loading http://localhost:8888/forms90/webutil/jacob.jar from JAR cache
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
Forms Applet version is : 902122
2003-Oct-20 13:15:04.702 WUI[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2003-Oct-20 13:15:04.718 WUF[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2003-Oct-20 13:15:04.718 WUH[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2003-Oct-20 13:15:04.734 WUS[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2003-Oct-20 13:15:04.749 WUT[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2003-Oct-20 13:15:04.781 WUO[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2003-Oct-20 13:15:04.796 WUL[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2003-Oct-20 13:15:04.796 WUB[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
oracle.forms.net.ConnectionException: Forms session <2> aborted: unable to communicate with runtime process.
 at oracle.forms.net.ConnectionException.createConnectionException(Unknown Source)
 at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
 at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
 at oracle.forms.net.HTTPNStream.flush(Unknown Source)
 at java.io.DataOutputStream.flush(Unknown Source)
 at oracle.forms.net.StreamMessageWriter.run(Unknown Source)
2003-Oct-20 13:15:37.313 WUB[VBeanCommon.destroy()] WebUtil Browser Functions being removed..
2003-Oct-20 13:15:37.329 WUL[VBeanCommon.destroy()] WebUtil C API Functions being removed..
2003-Oct-20 13:15:37.516 WUO[VBeanCommon.destroy()] WebUtil Client Side Ole Functions being removed..
2003-Oct-20 13:15:37.516 WUT[VBeanCommon.destroy()] WebUtil File Transfer Bean being removed..
2003-Oct-20 13:15:37.532 WUS[VBeanCommon.destroy()] WebUtil Session Monitoring Facilities being removed..
2003-Oct-20 13:15:37.532 WUH[VBeanCommon.destroy()] WebUtil Client Side Host Commands being removed..
2003-Oct-20 13:15:37.547 WUF[VBeanCommon.destroy()] WebUtil Client Side File Functions being removed..
2003-Oct-20 13:15:37.547 WUI[VBeanCommon.destroy()] WebUtil GetClientInfo Utility being removed..

Colorsync utility problems

I'm trying to get my printing straightened out on a 10.4.11 system that has been updated from 10.3.9.
Printing was perfect on 10.3.9, but is not good from the Adobe apps on 10.4.11. I put off upgrading to 10.4 as long as I could, because I knew so many folks had so many issues... I finally had to upgrade, and now I am hit.
My printer is an epson R2400. Prints are as expected from a MacBook Pro that has never been upgraded from one system to the next, and also from a test installation of 10.4.11 on a brand new hard drive. It is only the upgraded (via archive and install) system that I can't get straightened out.
Chromix is making some custom profiles for me, and they had me go into colorsync utility to assign Generic RGB as the default profile for the printer. Problem is, the R2400 is listed 3 separate times in Colorsync utility, although it is only listed once in Printer SetUp utility and in System preferences under printing and fax.
Resetting the printing system doesn't clear this up, nor does uninstalling the driver and reinstalling.
I don't know for certain that this is the cause of my color management issues, but it certainly does not seem desirable. The systems on the machines that print correctly do not have duplicate instances of the printer listed in colorsync utility.
I am not able to set a default printer in Colorsync utility, presumably due to this problem. This is the only printer installed, and it is listed as default the other 2 places.
An archive and install did not fix the issue.
Any idea on how to clear this up short of totally starting over with a fresh installation, from scratch? the printers are listed with unique ID's in Colorsync utility, but I don't know how to run anything down from there.

I am not printing with colorsync color management, rather I am using colorsync *utilty* to correct a misapplied color profile in the driver.
This is documented a few places on the web, and it is Chromix's answer to incorrect prints from ALL the Adobe applications... in my case, PS 7, and ALL CS2 and CS3 suite applications. Very specifically, the print error happens with Photoshop 7 and CS2 and CS3, and Illustrator CS2 and CS3, and InDesign CS2 and CS3. The solutions it to be certain that in your print stream, when you check the details of how the print is being sent, that colorsync is set to standard conversion, generic RGB profile, no quartz filter. The way you typically mange this, if the wrong RGB profile is showing, is by resetting it in ColorSync utility.
I am printing a a profiling target, so I am not setting up a conversion from source space to print space. I am sending with color management off.
The reason I didn't mention my workflow settings is that is not the question. The question is how to get rid of the spare printer instances in colorsync utility, becasue i think they are hosing my otherwise correct color settings.
My target print looks like it is being color managed incorrectly, even though all color management is disabled in the Photoshop print dialog and in the print driver. The colors are the correct hue, but they are much too dark.
Chromix has a little application you can print the targets from. Photoshop (all versions) on the system with the colorSync utility problem prints the target too dark compared to the Chromix utility, or to Photoshop on two other systems I have with no colorSync utility duplication of printers.
Again, I am not looking for help with my printing workflow, because that is not the question or problem. My prints are correct on other systems with the same version of software and the same print settings, as long as I can make the needed correction in Colorsync utility first.
the question is how to reset colorsync utility, or otherwise troubleshoot the erroneous feedback it is giving me..

WRT54G Web-utility Issues

First of all...I'm using a Linksys WRT54G v5 wireless router and a sbc/yahoo DSL service with a Siemen's 4100 DSL modem. I am addressing all of my issues using a Dell XPS710 fully loaded running Windows Vista and using IE 7.0.6 I've always been able to use the internet (besides DSL's inevitable issues), but in the last few days have been messing with the settings of my network in order to streamline our filesharing/printersharing within my household.
So I tried checking out the 'General Linksys Router FAQs' but when I clicked the links regarding my problem, it only loaded windows addressing how to set up a "PPPOE DSL service."
So my issue is in regard to accessing the Web-based utility. When I key in my router's IP address to my web browser (http://192.168.1.1/) and type in the generic password, then it loads the web-utility with obvious 'errors on page.' I then cannot do anything more than change the time zone...I cannot chose a different tab than the "Setup Basic Startup" tab which loads automatically.
When I click on the "wireless" tab for example, a white page loads with this gibberish:
¶âÐ&†¶¤ ´! h% Cèl£¹>²$h VÚ ªå QVÄš\aIAB Öd` «°xU cñj Veñê Æâ5 ¬Æâ5)ŒÅk X Å;¡0 O– ° cDæ‰äË eì …BÚƒ,í³³óÅ ÍÚA †P ¿þ öc.]¡˜g®2( Ê1‘3š)}l’Ç*y¬ÐÖ }¤uòX¥ úH[›ä±F[[ô‘¶ž Ç:m•%úL›e:¯FÐN'Ö ÚéÌšA; Z«†ž 50<ˆ g^Œ3/Æ™ ãÌ‹qæÅ8óbœy1Î¼˜`^L0/&˜ Ì‹ æÅ$ó(Œ™ÇÎd‹Â Â W0• ‘ Ãvˆ•´Í®"µÍR Û
I can then return to the previous page on my browser to see the Setup screen again, but there are still obvious visual errors in how the page loaded (it has some of those stupid 'red x's' where images were supposed to load).
So I tried updating the the firmware (its still 1.00.6) using the instructions I found for my router on the linksys website...but halfway during the upload of the .bin file from the management screen, the page failed to load and I recieved the "Internet Explorer cannot display the webpage" message. Since then, my connection has been cutting in and out (Local only) and sometimes I cannot view that the WRT54G is part of my network. Connecting to the internet directly through my DSL modem works just fine still.
So why can't I access my web-utility correctly? Why can I not upgrade my firmware? Would upgrading the firmware fix the web-utility access errors? Why is the connection cutting 'in and out' rather than just not working? Has ANYONE else had this problem (with the web-based utility not loading correctly in IE)?
Thanks,
Todd W.
Message Edited by Veridicus on 12-11-2007 07:11 AM

I fixed it! I had to 'reset' the modem for that minute and then upload the firmware from a non-vista pc. The web browser gave me the 'upload successful' page and so I restarted the computer and unplugged and replugged back in the router...then when the computer rebooted and I loaded the Linksys Router Web-Utility...viola...it no longer contained those ridiculous error screens or jibberish.
And here I though I was gonna have to drop another 50 bucks...

Wrt110 still cannot access web utility w/o resetting

http://homecommunity.cisco.com/t5/Wireless-Routers/Unable-to-Access-Router-Admin-Page/m-p/293835/hig...
Long existing problem, that IE8 temporarily cleared up (actually only for a day or so).
Router has to be reset to view the on-line web utility. Doesnt matter what version of Windows or IE. With and without A/v and firewall. Tried MANY variables.
This router will not access the Advanced Settings web utility pages no matter what I do, unless it's to power off then back on.
Once I get this problem straightened out I can address the other one: my new netbook cant get on the internet at home with my password. It forces loss of connectivity to the hardwired desktop when I try.
But I really need to know what I'm doing wrong, why I can NEVER get the online admin pages without powering the router off/on.
Please guide me.
Solved!
Go to Solution.

Yes. Hardwired to the router.
Using the "Advanced Settings" on the menu under the router model in the EasyLink Advisor.
Also by typing IN the URL using http and https. With and without firewall. W & W/o a/v. Ie 7 & 8. Vista & Windows 7.
Ie64 and Ie32. And Firefox.
I upgraded from Vista 64 to W7 64. And updated IE from 7 to 8 (which gave me one day access without resetting).
Please offer suggestions. It has to be something in the software since ALL the variables have been tried (I cant think of anything else to change).
Router's webpage (192.168.1.1 which IS the address used by the EasyLink Advisor when I click on Advanced Settings) results in a Diagnose Connection Problems pages which ends with this result:
Problems found: "The remote device or resource won't accept the connection" Only when I power off/on can I get the signin popup and the web utility/admin pages.
I might add that my netbook cannot get on my network even with my password. I no longer use mac address filtering; turned it OFF. It IS in the OFF/Disabled position on the router's utility page. I think this problem might get fixed once I find the solution to getting to the admin pages/web utility pages without having to power down/up.
I can get this desktop AND the netbook on if I power everything down. But who wants to do that every time?
HELP please!
thank you for ready and any suggestions

BEFW-11s4 ver. 4 Web-Utility is downlevel

I am trying to use a BEFW-11s4 that I put on the shelf years ago. I am configuring it as a cascaded router in a LAN-LAN configuration (as the 2nd router).
The ethernet cable from the main router is connected to one of the ethernet ports on the BEFW.
DHCP is disabled on the BEFW.
The IP addr of the main router is 10.0.0.2 .
The IP addr of the BEFW is 192.168.1.1 .
I have two problems that I hope yall can help with, because reusing this router is way cooler than buying another one :-).
First, the Web-Utility of the BEFW seems to be downlevel, since it does not match the illustrations in the manual for it. I need the uplevel utility to enable WPA2 wireless security. I suspect that the firmware is downlevel also, but the linksys site says that there are no downloads available... So, where can I download & how do I install the current level of the Web-Utility?
Second, when I configure the BEFW as the downstream router, which I can get working in wired mode, I can no longer access the BEFW at 192.168.1.1 . In order to access it again, I have to only connect the computer to the BEFW, and then hold down reset long enuf to restore the original settings. If anyone knows how to get to the BEFW Web-Utility after it is set up in LAN-LAN cascaded mode, please let me know.
Thanks!!!!

The BEFW11S4 does not have the WPA2 wireless security type. I believe it is not compatible with that type of security. What you can set on the router is WPA Pre-shared key and as far as I know, the last firmware update was version 1.52.02.
For your second concern, make sure that you set a Static IP on the BEFW router so that you can access its UI. Also, do not use the192.168.1.1 IP Address on the BEFW if your router IP is 10.0.0.2 since you have a LAN to LAN network. The secondary router should be within the range of the main router. Try using 10.0.0.5 which is within the range with the main router.
You may refer to the procedure in cascading LAN to LAN on this link: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=785463d9ecaf4cac84aed245b08d615f_3733.xml&pid=80&r...
Hope that helps!

Office Web Apps Server 2013 - Word Web App - Problem with Tab space

Hello We have Office Web Apps Server 2013 running with SharePoint 2013. Users Editing a Word document with Office Web Apps, can't use "Tabs", any Word document with Tabs; the tabs are replaced with a single space.
Has anyone noticed this? Is this a bug?
-thanks
thomas
-Tom

Yes, currently the Word Web App does not support
Tab Keyboard shortcut for editing document content .
For more information, you can have a look at
the article:
http://office.microsoft.com/en-us/office-online-help/keyboard-shortcuts-in-word-online-HA010378332.aspx?CTT=5&origin=HA010380212
http://social.technet.microsoft.com/Forums/en-US/3f5978d3-67a1-4c8c-981f-32493d72610b/office-web-apps-server-2013-word-web-app-problem-with-tab-space?forum=sharepointgeneral

Can't re-add printer after removing from eprint center - 'Web Services Problem'

I have an HP Photosmart Premium C310 series printer (Model Number CN503B) which I have been using with ePrint for about 18 months. Aside from intermittent issues it has worked, I use a chromebook most of the time so rely on the ePrint option via Google Cloud Print.
Last week it stopped working, with every job in the list showing as cancelled. Following advice on the forum I removed the email address of the printer from the eprint center. I thought it would then be simple to add the printer back. However, I have been unable to connect the printer to the web service so I cannot create the code I need to add the printer back.
STEPS TO REPRODUCE:
1. Factory reset printer settings
2. Factory reset network settings
3. Restart printer and Reboot router
3. Settings -> Network -> Wireless Setup Wizard
4. Choose correct SSID, enter password for WPA
5. ‘Connected to Network’
6. Settings -> Web -> Enable Web Services
7. ‘Accept terms’ screen -> Accept
8. ‘Checking for product updates’ screen shows briefly then returns to 'accept terms' screen
9. Next it makes a ping sound and shows ‘Web Services Problem’ ‘Problem connecting to Web Services Server’, it then pings again a few seconds later (which ties in with what I see in the network logs as a second attempt)
10. Log on to printer via web interface and set IP address of printer to manual IP outside DHCP range (as advice on other threads in this forum). Check DNS setting valid (same as gateway server which all other devices on network are also using successfully as DNS)
11. Repeat steps 6 and 7 - still same error message
I consider myself technically savvy and have followed all advice I can find on this forum including the following:
1. reverting to printer and network defaults
2. rebooting router
3. assigning static IP address to printer outside of DHCP range of router
4. connecting to printer via web interface and setting DNS to variously: same as gateway, google DNS (8.8.8.8), ISP DNS
5. adjusting firewall settings on router to explicitly allow and log outbound connection on the HP ports (already had a rule allowing all outbound connections)
As mentioned, the printer worked fine with ePrint previously so I suspect the ePrint server is rejecting a request from my printer for some reason, maybe because there is old / corrupt data on the server regarding my specific printer.
I’m logging outbound traffic from the printer and here are what the router logs show me (printer IP replaced with 192.168.x.x below, even though it is not public )
Thu, 2013-04-11 09:13:42 - TCP Packet - Source:192.168.x.x, 36475 Destination:15.201.202.81,80 - [HTTP rule match]
Thu, 2013-04-11 09:13:43 - TCP Packet - Source:192.168.x.x, 51463 Destination:15.201.224.79,443 - [HTTPS rule match]
Thu, 2013-04-11 09:13:44 - TCP Packet - Source:192.168.x.x, 53044 Destination:15.201.224.79,443 - [HTTPS rule match]
Thu, 2013-04-11 09:13:44 - TCP Packet - Source:192.168.x.x, 51463 Destination:15.201.224.79,443 - [HTTPS rule match]
Thu, 2013-04-11 09:13:44 - TCP Packet - Source:192.168.x.x, 53044 Destination:15.201.224.79,443 - [HTTPS rule match]
Thu, 2013-04-11 09:13:51 - TCP Packet - Source:192.168.x.x, 64270 Destination:15.201.224.79,443 - [HTTPS rule match]
Looks like both are HP sites: first is 'g4t2674.houston.hp.com' and the second secure one is ‘registration-pro-site2eprint.houston.hp.com’ which sound likely to be correct. That suggests the DNS is working but that the registration server doesn’t like the request for some reason.
I had the printer registered for Google Cloud Print but I have now deleted that also and it doesn’t seem to have made any difference (assume it just formats and forwards to the HP ePrint email anyway).
One hack that sheds some further light is to switch off wifi on the printer and then switch on ePrint. Eprint gives an error but stays set as 'on'. When I then switch wifi back on I can then at least check for product updates (it tells me I have the latest product updates). However, web services are still a 'no go'. Network traffic for that product update exchange looks like this:
Thu, 2013-04-11 10:14:51 - TCP Packet - Source:192.168.x.x,63960 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,63960 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,63960 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x ,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
So clearly the printer can communicate to those servers well enough to find it has the latest firmware.
I realise this is a lot of information but hopefully some of it is helpful for troubleshooting.
Thank you in advance for any help!

The issue disappeared this weekend. I didn't change anything so it must have been something server side. I notice others with the same issue have also seen it resolved.
Thanks to all those who contributed and tried to help out. Although disappointed I went for a long time without ePrint I'm glad that action was apparently taken to resolve in the end.

Airport Extreme Utility problem with Vista (works with XP, MacOS)

Hi,
I just setup a new Airport Extreme network at my house, and most things are working fine. I have wirelessly connected at various points an Airport Express (using WDS), a MacBook Pro (OSX) and an IBM Thinkpad. I have several wired machines as well.
My problem: The wired machine I use to configure and setup everything is a Vista Ultimate machine. Unfortunately, the Airport Utility won't connect to the Airport Extreme (or Airport Express for that matter) from Vista. The utility works fine from XP or OSX, but not from Vista. Note that I'm using this in a wired capacity. The Vista machine is directly connected to the Airport Extreme, while several other machine are connected through a GBit switch.
Any help would be much appreciated? Is this a Vista security problem or an Airport Utility problem with Vista?

It's most likely a security issue with Windows Vista. Vista has the ability to set "compatibility modes" for applications.
Try:
1. right mouse clicking the Airport Utility's .exe file.
2. Click the Compatibility tab. Change the Compatibility mode to Windows XP (Service Pack 2).
3. Now go down to "Privilage Level" and check the "Run this program as an administrator"
Apple never tells you this but you must connect to the Airport Extreme wirelessly. Now run the Airport Utility. You should see it.

Web util on Win XP

Hi all,
We have installed 10g Forms and Reports Services on Win XP.
On our forms we are using web util to read and write to XL files. When we run the form we get the following error 'oracle.forms.webutil.host. Host bean not found. WEBUTIL_HOST.Execute will not work.'.
Same feature, same form when we run from 10g developer suite using OC4J it is working fine.
Any clue...
Thanks & Regards,
Raja

Hi Andreas,
Thanks for your message.
I have set the path correctly in OAS. It picks up other object libraries except webutil where everything is in the same folder.
I am still getting the error.
Raja

Urgent web service problem. can not find url of WSDL

Hi all,
I met a web service problem recently.
1 I have set up a web service and reside it on Java System Application server9.0. But there's a bug of this web server, which will stop after the user log off the server. I have installed the Application server as a windows service. It suppose to run all the time. I don't know why the server stop after I log off.
2 For that reason, I tried to migrant my web service from the java application server to Tomcat5.5. I deployed my web service to folder webApps. But I don't know the WSDL url of the web service, which is the web reference for my frent-end c#.net application.
Anybody can give me some idea?
Many thanks

Nobody knows?
Please help me

Linsys WTR160N v3 can't acces web utility

I had disable the web utility acces via wireless in my router, because my neighboor hacked the system, but I did it from a wilreless computer, now I can' acces my administrator page conected with the ethernet cable to the router, I need to change my password, but every time I put the IP address 192.168.1.1., the browser time session expired. So i restar all the system?

Remote access setup is for outside your private lan, not inside i.e., access your router from your place of work a billion miles away. This is normally disabled anyway in all routers by default.
Hare reset the router and reconfigure it. Add strong security as this is the only way your neighbor could have got on, and I doubt it if you had security set anyway.

WRV200 Web Utility Problem

Similar Messages

Maybe you are looking for