WRV200 - Wireless connection established - lose communication after time

I recently purchased a WRV200 wireless router and I have to say the features it offers is well worth the price. I have found an anomaly with the router that remained even after several configuration changes and the most recent firmware update. This situation is as follows (note: all hard wired connections are unaffected by this issue). SSID broadcast: off Security: WPA2 Personal (PSK set) Default settings on the rest of the wireless configurations. 1. Wireless users with the correct PSK and SSID name can connect and receive wireless service. 2. After what seems like an arbitrary amount of time, a wireless user cannot reach the gateway or any other node beyond it - the user is virtually disconnected. However, the user is still receiving a full signal from the router and remains connected wirelessly. 3. "ipconfig /release" followed by "ipconfig /renew" does not resolve the issue. 4. In order to restore service, the user must disconnect from the wireless service host (the router) manually, and then reconnect. At this point service is restored until the next arbitrary outage.

try changing the wireless channel to either 1 or 11 .. beacon interval - 50 , Fragmentation threshold - 2306 , RTS threshold - 2307

Similar Messages

Ever since I received my Macbook Pro in July 2011 I've had issues with my wireless connection at home. After software updates, Apple support suggested I reboot my router which works. But now I have to do it every other day. ????

Ever since I received my Macbook Pro in July 2011 I've had issues with my wireless connection at home. After software updates, Apple support suggested I reboot my router which works. But now I have to do it every other day. ???? AT&T my DSL carrier suggests I get a new router. Apparently the one I have is really old and doesn't support my Macbook Pro. Does this sound right?

If your using WEP encryption yes, Apple has discontinued that becaues it's worthless. WEP (and WPA) is cracked so encryption makes no sense.
Get a new Wireless N router, set it up with WPA2 (AES) Personal and two different 20+ randon letter/numbersymbol character passwords
One for Admin access only of the router, keep this on paper off all comptuers in a safe someplace.
One for entering into devices, computers etc for Internet Access Only.
You need the long and random password to defeat brute force attacks by GPU software that the hackers have now.
Also if you give out the password to another, they can't hack the network with the guest access password.
Computers remember the internet password, so anyone with access to your machines or network will have the password.
Since you have another Admin only password, they can't hack in. got it?
You don't need "Invisible" or "MAC Address filtering" that's a waste of time as hackers can sniff a network and causes issues getting on the network.
Good luck.

I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?

Hi
I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?
I have tried reseting the network settings and forgetting my wireless connection and re-connecting to it. I even backed up my phone on itunes and restored it, factory reseted it. Nothing seems to work.
Also after my upgrade to ios 8.1 my personal hotspot option under cellular data has disappeared.
Would you please help me out? I would really appreciate it.

Hi..
Restart your router then restart the iPhone to test.
If that doesn't help, try this support article > iOS: Troubleshooting Wi-Fi networks and connections

Wireless connectivity no longer available after TWC adds digital phone service

Hi All,
My problem is that my wireless Internet connectivity is no longer available after Time Warner Cable added digital phone service to my existing TV and broadband Internet service.
Prior to having the digital phone service added, my set up was a Motorola Surfboard cable modem connected to my Linksys WRT54G wireless router, with three computers (two Win XP desktops and one Win 7 laptop) wired to the Linksys router. I had wired Internet connectivity on all three computers. Importantly, I could also access the Internet wirelessly from the laptop instead of using a wire.
AFTER having the digital phone service added, my set up is the same except that now an Arris Touchstone Telephony Gateway (TG862G) has replaced the Motorola Surfboard cable modem. I still have wired Internet connectivity on all three computers. However, now I cannot access the Internet wirelessly from the laptop. This is a real problem in that often others in the house need access to the wireless network as well.
I should also mention that (from a wired connection) I cannot access the Linksys router any longer via 192.168.1.1. Now, the Linksys router seems to be "invisible," almost as though it were a pass-through device. I can access the Arris gateway at 192.168.0.1 (for what it's worth), but not the Linksys router.
Also, not sure this is important, but some time ago (when my wireless was working) I had configured the Linksys router so that it wouldn't broadcast the SSID. Through the Win 7 "Network and Sharing Center" I have tried to "manually connect" to my (hidden) wireless network. The message indicates that my hidden network already exists, but I still can't connect to it.
I've seen a few potential remedies involving power cycling the gateway and modem in certain sequences, setting the gateway's NAT mode to Bridged, etc., but nothing has worked so far. Time Warner Cable's only advice is for me to purchase (yet) another service so that the gateway can provide the wireless access, but I since my Linksys router worked before I'd rather stick with that method (and avoid yet another charge).
I would be very grateful for any help you could provide for this problem.
Thanks in advance.

1. Don't hide your SSIDs
http://www.howtogeek.com/howto/28653/debunking-myths-is-hiding-your-wireless-ssid-really-more-secure...
2. I assume the Arris is also a wireless router. Use inSSIDer to find the best non-overlapping, non-interfering wireless channels. Change the wireless channels on both the WRT54G and Arris if necessary.
http://www.metageek.net/products/inssider/

Wireless connection not restored immediately after sleep

Hi,
Since I have updated to Mavericks (OS X 10.9.1), my wireless connection doesn't restore automatically anymore after sleep.
This recently also started to happen when I boot my computer. I always have to click the wifi icon, select my network and then it still says "can't connect to network".
When I click the wifi icon and select my network a second time, it works.
I have tried setting the order of network services (WiFi first, then Bluetooth and finally Thunderbolt bridge), deleting my saved home network and adding it again, deleting all other saved wireless networks.
What can I do to fix this?
Thank you.

Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved. Make sure the box marked
Remember networks this computer has joined
is checked.
2. Follow the instructions in this support article under the heading "Symptom: The network connection drops unexpectedly."
3. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
4. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
5. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
6. Repair permissions on the startup volume.
7. Turn off Bluetooth and test.
8. Reset the System Management Controller.
9. Reset the PRAM.
10. Reinstall OS X.

WRV200 - Wireless Connection Is Periodically Lost

Hello,
I just bought a WRV200 and I have updated the firmware to 1.0.32.2.
I'm using WPA2-Personal.
I have to Toshiba notebooks with the Intel(R) PRO/Wireless 3945ABG.
I'm using in both computers Windows Vista (Home Premium and Ultimate editions).
The problem that I have is I get the connection lost periodically. Not always at the same amount of time.
I have tried 2 different Linksys WRV200 routers and I always have the same problem. I must add that one router have the 1.0.32.2 and the other 1.0.12 firmware.
Any ideas why? Is the ok? Is about the key renewal?
Thanks in advance for your replays!

A couple of suggestions:
1. Firmware 1.0.32.2 is not the latest firmware - you could find newer beta firmware at linksysinfo.org at the download section.
2. It would help if you spend the time to update the wireless driver on the computers. Check with the Intel's web site for the latest version.
http://support.intel.com/support/wireless/wlan/pro3945abg/index.htm
Message Edited by VPN_user on 08-21-2007 08:37 PM

Trouble connecting iMac to internet after Time Machine Reboot

Bear with me here guys.... I recently went to download Aperture onto my Mac but found that I required Mountain Lion, so I purchased it to upgrade from Snow Leopard. Having download the new OS I started the installation and it failed as it appears I have a fault with the Hard Drive; though my Mac gad operated just fine previously. As everytime I restarted my computer it wanted to start installing Mountain Lion but couldn't complete due to HD error; I rebooted via the Snow Leopard CD and loaded my last Time Machine save. I now have the Mountain Lion icon sat on my dock awaiting installation, though after I've had the HD fixed first obviously.
So having just reloaded the OS and rebooted via my Time Machine Backups (For which I use a USB connected Samsung External Drive) my iMac will connect to my wireless network via Airport just fine. Loading the internet via Safari is another matter. It will load the window but will remain blank white with the pinwheel spinning. Eventually I get the message that another computer using the same IP address is already on the network.
Having read the threads on here I have already tried resetting Safari, restarting my Router, I have double checked all the IP adresses of my another connected devices (none hold the same IP address as the iMac) have been round in circles in Network Settings Renewing the DCHP Lease, trying the set the IP address manually, turned everything off and on again and I have spoken with my service provider and they have not been able to tell me any more than the threads on here; and so here I am at a loss now.
Any or advice would be really appreciated.

Just a few more ideas...
Searching the web, I've found some possible fixes, some of which you have probably already tried.
Try connecting directly to the router with an Ethernet cable.
Check your wireless security (you should use WPA2, it's the strongest). Someone could be using your network, so try changing the password and see if that helps (this can be a pain if you have a lot of devices).
Flush the DNS cache:
For Lion and Mountain Lion: Enter the following command into Terminal:
sudo killall -HUP mDNSResponder
For Mavericks:
dscacheutil -flushcache;sudo killall -HUP mDNSResponder
Update the router firmware if it is out of date. Also, you can reflash with the current firmware, which [i]might[/i] help.
Hope some of these help, if not best of luck with getting the fault sorted out.

PC unable to find HP Deskjet 3050A despite wireless connection established.

I have recently purchased the deskjet 3050a and have connected it to my packard bell pc. The pc is running windows 7 and my router is a basic SKY provided unit. All tests show that the printer is connected to the correct network and the eprint works off my samsung galaxy but my pc is unable to find the printer wirelessly. I have tried all the suggested troubleshooting ideas on hp desktop.

First, download and run this utility: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-104282-2&cc=us&dlc=en&lc=en...
What does it say?
Do you have a firewall on your PC that is enabled (not Windows Firewall, but perhaps one associated with your antivirus security suite)? Disable it and try again.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Cannot establish wireless connection with WRT54G after power-off

My WRT54G (firmware v7.00.0) is connected to cable TV modem and
usually the wireless connection works fine, but after swiching off and later
on the power to WRT54G a laptop cannot establish WiFi connection to internet.
I can see in Odyssey software (for wireless communication) that my laptop
found the right network (SSID) but in status it says 'waiting for keys'.
I use WPA2 (TKIP). The laptop does not connect to internet.
When I connect it by cable (ethernet) the internet works fine, I have noticed
that by accessing the web-page utility of the router and simply clicking
save changes on wireless-settings page (without making any changes in
the settings) my laptop instantly establishes wireles connection and
everything works fine till next power swich-off.

Thanks for reply! I have my network in preffered, and the software/laptop locks on
the network (see it, says it have excellent signal strenght) and gives note
'waiting for keys' (the WPA2 encription key is in the settings - both of router and laptop client - Odyssey).
I've got firmware ver.7 so it is probably the latest.

Wireless connection not visible on Vista laptop using Time capsule

Change setup with Time capsule 1 TB, all MAC PC's work perfectly with wireless connection, except Vista laptop.
Vista discovers all other wireless connections except the one from Time capsule.
On advise from forum, changed Airport settings :
- Radio mode = 802/a - 802/g"
- Wireless security to "none"
Which other setting on Vista prevents at least discovering the wireless signal ?
Thanks for your support !
Pascal

I believe the problem has to do with some potential compatibility issue between the SP3 update and the currently installed Boot Camp drivers. Did you make sure that you (re)installed the latest Boot Camp drivers after you performed the SP3 update?
(ref: Apple Support: Installing Boot Camp drivers)
Also, the following firmware update may help as well: MacBook EFI Firmware Update 1.1

Cannot Get More Than 3 Wireless Connections

Howdy, I have a Linksys WRT54G v8. I can't get more than three wireless connections established to the router at a time. Is this a known limitation of the Linksys hardware or am I experiencing a novel problem. I've changed frequencies and switched from mixed mode to G only in order to resolve the problem but these have not made a difference. Allowed number of DCHP users is set to 50. Any suggestions?

In theory, your router can support up to 32 wireless users. However, since the 54 Mbps bandwidth is shared, the practical limit is much lower, but should be more than 3.
How many "4th" computers have you tried to connect? What exactly happened when you tried to make the connection? Did you turn off the wireless computer's software firewall before you tried to connect? Is the wireless computer setup to "Obtain an IP address automatically" and "Obtain DNS server address automatically" ? What wireless adapter(s) are in the computers? Please give all details of computers that failed to be "number 4".

Slooooooow wireless connection

I have a D-LINK DI 624 SUPER-G router and my MacBookPro (running Leopard) wireless connection is most of the time super slow. In fact a lot of times when surfing the net I get a timeout message. Sometimes the connection drops for a few seconds. I know this because I see the bars dissapearing and re-appearing after a few seconds. Please note that the probem IS NOT WITH MY CABLE MODEM or INTERNET CONNECTION. I have another DELL laptop running Windows XP connecting to the same wireless router and after numerous simultaneous tests, I concluded that the problem is solely with my MAC's wireless card. This is really frustrating, my warranty expires in July and I'm one week away from sending the MBP back, unless there's a way to fix this without having to spend more money. The MBP is expensive enough and it should WORK!

Welcome to Apple Discussions!
Have you had this Mac a long time? Did this just start happening? You say your warranty expires in July. If so, any repairs should be covered under Applecare and shouldn't cost you anything.
Do you have access to an Apple Store? If so, you could make an appointment with the genius bar and see if they can help you troubleshoot this. If there is a problem with the wireless card or the antenna, it should show up trying to access the store's wireless network.
Good luck!

Pureview 808 Intermittent wireless connection and ...

I noticed when I connect to my home network or office wireless for downloading of map, the wireless connection will disconnect itself after sometimes. I don't think it is normal. Anyone has got this experience ?
In addition, while I am able to start the joikuspot services for internet sharing or tethering, the wireless network is not searchable by my other devices such as tablet and lumia 900. I thought the network might be hidden but it is not.
Anyone got any advice ?
Thanks

Hi all,
I know a lot of people have got JoikuSpot working, and a few haven't. For those that cannot get it working, I would say it's just a matter of the settings, so let's see if we can work together to fix that
The following steps might not complete, I will let the community help me with that. But at least it's a start..
So, I have a Nokia 808 PureView (with firmware 112.020.0309).
Steps:
1) I have a mobile subscription that allows me to use a flatrate data subscription.
2) I checked my phone knows how to connect to the data subscription by checking: Settings > Connectivity > Settings > Network destinations > Internet. On my device I can see I have "Elisa Internet" as my operator is Elisa Finland.
3) I ensure "Mobile data" is enabled by swiping down the status panel on any homescreen, and ensure the "Mobile data" icon is lit.
4) I ensure Wi-Fi is enabled by swiping down the status panel on any homescreen, and ensure the "Wi-Fi" icon is lit.
5) I ensure my device is not already using any Wi-Fi network by swiping down the status panel on any homescreen, and ensuring the text under "Wi-Fi" says "Not connected".
6) I launch the JoikuSpot application from the menu.
7) I am asked "Allow sharing your internet connection with external devices?" .. I select "Yes".
8) I am asked to select the Access Point. As I am having an Elisa Finland subscription, I am asked to select one of the following:
   Elisa Internet
   Elisa WAP GPRS
   Elisa MMS
9) I see "Starting JoikuSpot access point".... with an option to press the cancel button (don't press it).
10) About 15 seconds later I see is the application running, with options to "Stop", "Buy Full Version", and I see the SSID network name that JoikuSpot has created as an Ad-Hoc network, in my case "Nokia_808_PureVi_JoikuSpot_F06B". I can also see the same network with my laptop.
**What I have discovered doesn't work**
I have discovered that IF I am associated to a Wi-Fi network, i.e. at step (5) it says something else than "Not connected", then between steps 7-8 I am asked "WLAN already active. Allow application to replace the existing connection?" where I would select "Yes". This for me doesn't work though. I would suggest you check at step (5) that you are not already connected to a Wi-Fi network before launching JoikuSpot.
Let me know if this helps. If you are still having problems I believe there are many that have got joikuSpot working, and I would say please say at which stage it doesn't work for you.
thanks, Craig

How do I keep my Ipad from dropping its wireless connection?

How do I keep my Ipad from dropping its wireless connection?
Most of the time, my iPad does not maintain a connection to the interenet via my wifi router. My PC laptop has continuous connection, so I know it is not the internet connection.
Is there a way to trouble shoot this? Can I purchase a dedicated IP Address for my Ipad? This is beyond aggrevating since internet activity is the main reason I purchased the pad.
Your help is greatly appreciated.
Poet Margo

I would suggest that you give Apple Tech Support a call and go over your settings under WI-FI and General Settings as well as your router settings etc.. There are all sorts of things I could tell you to try but this forum is not the best place to go over all the numerous settings that could be the issue. Just call them and they will walk you through the proper trouble shooting steps.

Limited Wireless Connection?

I'm not sure if this goes in the right section, but when I try to connect to my wireless connection, it takes a long time and then says limited or no connection. The first time I installed windows, it was 5GB and FAT format. I realized it was too small and then did 10GB FAT format, but now the internet does'nt work. The time when it was 5GB it worked, but now it doesn't. I've seen similar posts to this, but I didn't get anything. Any help please?

Double click the Wireless icon on the Taskbar.
Click the Properties box.
That should take you to the 'Wireless Network Connections Properties' dialog which has a list of Preferred networks. Click on yours, then click Remove.
Then click on 'View Wireless Networks' and try to reconnect to yours.

WRV200 - Wireless connection established - lose communication after time

Similar Messages

Maybe you are looking for