WS Console: Med Rec: Runtime loading of methods incorrect

WebLogic 8.1, Med Rec Tutorial 17, Step 7: Secure the findNewUsers() EJB method.
Netscape 7.1 & IE 6.0
Methods do not appear in list. A JavaScript dialog appears with the following
text:
Runtime loading of methods incorrect. MethLen: 27 resLeng: 27 express: 26
Gary

More than a year, since the original one was posted, later I came across the same issue. What a pity, BEA wasn't interested in looking into this. I spent a little time to find out that in the javascript the variable methodString contains semicolon separated methods signature has a method
assignGroups(java.lang.String,[Ljava.lang.String;) - REMOTE
with a semicolon embeddeb in it. The signature actually is
assignGroups(java.lang.String,java.lang.String[])
This extra semicolon makes the length (26) of the methods got one more than it suppose to be.
- Michael

Similar Messages

Med Rec medrec tutorial 10 deployments-- EJB Modules EJB is not shown

This note adds missing steps in the Med Rec (medrec) Tutorial 10
The tutorial shows how to use EJBGEN to generate EJB classes (incl java source) from .ejb files.
Unfortunately it is missing a few key details. These are described below.
Many thanks to Chris Wall for supplying the answers and hints.
Q: The tutorial includes deploying the manually generated physSessionEjb’s. After doing the step that generates the PhysSession*.java files, onefinds that when trying to deploy that there are no class files – nothing has been built. Are the class files supposed to be generated by the ejbgen step?
[Chris] No, EJBGen just generates the local and remote interfaces and descriptors only. An additional step should be added to explain how to build the newly generated EJBs. I believe you are correct in calling “src/physicianEar$ ant –f build.xml build”.
Q: Manually built the class files using ‘ant –f build.xml build’ in the physicianEar src dir – but that failed in the acc.split.dir step with class not found /org/apache/struts/action/ActionForm.
Obviously did not get the struts jars on the classpath. But as much of the build as completed did include creating the class files.
[Chris] Yes, it looks like struts.jar is not in the classpath. Is this the “build.split.dir” or “appc.split.dir” target? In either case, wlcompile and wlappc should recognized all libs in "${app-inf.dest.lib}" and append them to the compile/appc classpath automatically. The libs should have been copied during the “prepare” target. Can you make sure that struts.jar exists in c:/medrec_tutorial/build/physicianEar/APP-INF/lib? If not, re-run the target with verbose: “src/physicianEar$ ant -verbose -f build.xml build”, and make sure that the libs are copied in the “prepare” target.
Q: When doing the deploy step, we get no errors but on the console window and do not see the tutorial_deployment item under DeploymentsàEJB Modules. There is something under Deployments-->Applications --> tutorial_deployment. It appears the deploy failed since there’s nothing under Deployments --> EJB Modules, and what is there is ‘left over’ from deploying the jar (the ear?) that contains the stuff deployed by the deploy step at the start of tutorial 10.
[Chris] Once the build is successful, you must deploy the EAR. This is done by executing : “src/physicianEar$ ant -f build.xml redeploy.physician.ear”. Again, a step that was left out. Yes, you should be looking at Deployments--> Applications--> tutorial_deployment. So, to summarize: generated the local and remote and descriptors for the EJB, compile the EJB and package the EAR, deploy the EAR, and then view the deployment in the console.

This note adds missing steps in the Med Rec (medrec) Tutorial 10
The tutorial shows how to use EJBGEN to generate EJB classes (incl java source) from .ejb files.
Unfortunately it is missing a few key details. These are described below.
Many thanks to Chris Wall for supplying the answers and hints.
Q: The tutorial includes deploying the manually generated physSessionEjb’s. After doing the step that generates the PhysSession*.java files, onefinds that when trying to deploy that there are no class files – nothing has been built. Are the class files supposed to be generated by the ejbgen step?
[Chris] No, EJBGen just generates the local and remote interfaces and descriptors only. An additional step should be added to explain how to build the newly generated EJBs. I believe you are correct in calling “src/physicianEar$ ant –f build.xml build”.
Q: Manually built the class files using ‘ant –f build.xml build’ in the physicianEar src dir – but that failed in the acc.split.dir step with class not found /org/apache/struts/action/ActionForm.
Obviously did not get the struts jars on the classpath. But as much of the build as completed did include creating the class files.
[Chris] Yes, it looks like struts.jar is not in the classpath. Is this the “build.split.dir” or “appc.split.dir” target? In either case, wlcompile and wlappc should recognized all libs in "${app-inf.dest.lib}" and append them to the compile/appc classpath automatically. The libs should have been copied during the “prepare” target. Can you make sure that struts.jar exists in c:/medrec_tutorial/build/physicianEar/APP-INF/lib? If not, re-run the target with verbose: “src/physicianEar$ ant -verbose -f build.xml build”, and make sure that the libs are copied in the “prepare” target.
Q: When doing the deploy step, we get no errors but on the console window and do not see the tutorial_deployment item under DeploymentsàEJB Modules. There is something under Deployments-->Applications --> tutorial_deployment. It appears the deploy failed since there’s nothing under Deployments --> EJB Modules, and what is there is ‘left over’ from deploying the jar (the ear?) that contains the stuff deployed by the deploy step at the start of tutorial 10.
[Chris] Once the build is successful, you must deploy the EAR. This is done by executing : “src/physicianEar$ ant -f build.xml redeploy.physician.ear”. Again, a step that was left out. Yes, you should be looking at Deployments--> Applications--> tutorial_deployment. So, to summarize: generated the local and remote and descriptors for the EJB, compile the EJB and package the EAR, deploy the EAR, and then view the deployment in the console.

SRW248G4P - (!)Loader Binary checksum error - ERR Runtime Loading Fail - System Halt.

We have this 48 port switch in our engineering department, and it basically stopped passing network traffic.
When connecting to the Console port and power cycling the switch, this is what I see:
Image Loader 1.0.1
Loading Diagnostic Image File : SRW224G4P_SRW248G4P_boot.bix
Diagnostic 1.0.1
User Mode
--- Performing Power-On Self Tests (POST) ---
DUMMY Test 1 ................. PASS
UART Loopback Test ........... PASS
POE UART Loopback Test ....... PASS
DRAM Test .................... PASS
Timer Test ................... PASS
Done All Pass.
------------------ DONE ---------------------
(!)Loader Binary checksum error
<ERR> Runtime Loading Fail - System Halt.
This error obviously doesn't look "normal".
When pressing CTRL-U, I get the following screen:
File Name                         S/Up Type Size       Create Time
$logfile_1                          0    3         64 1193046:28:15
Factory_Default_Config.cfg          0    5        354 24:01:02
SRW224G4P_SRW248G4P_boot.bix        1    1    1377600 00:01:03
certificate                         0    8      18040 24:00:56
startup-config                      1    5       5651 25:00:38
startup1.cfg                        0    5       5537 24:01:14
Free Space : 5636096
[X]modem Download [D]elete File [S]et Startup File
[Q]uit
Select>
I've tried to update the "SRW224G4P_SRW248G4P_image_v1310.bix" file using Xmodem download, but since I really wasn't sure how to use this boot loader tool, I haven't been successful at doing that, nor do I even know if that's the solution for the problem that I'm having.
Xmodem Receiving Start ::
XMODEM, Successful.
Blocks Received = 7289
Bytes Received = 394480
Errors:
        Checksum   = 0
        Complement = 0
        Duplicates = 0
Image downloaded to buffer.
        [R]untime
        [D]iagnostic
        M[u]ltipe Image
        [L]oader (Warning: Are you sure what you are doing?)
        [Q]uit
Update Image File:r
Runtime Image Filename : SRW224G4P_SRW248G4P_image_v1310.bix
Updating file system.
File system update fail.
I'm guessing that I'll need to contact Cisco tech support, although at least through their web site, they make that nearly impossible to accomplish.
Does anyone have any suggestions on what may have happened to our switch and what I should do to recover? Of course we're about to start a time-critical round of product testing, and without this switch, I'm dead in the water. And it's not like we have a spare 48-port PoE switch lying around.

Hello,
I got the same issue. After downloading and uploading the firmware, I got the following result and all LED on the switch are glowing. Could you please help on this issue? Where can I find the right firmware. I also have Image loader 1.0.1.
Xmodem Receiving Start ::
XMODEM, Successful.
Blocks Received = 6b59
Bytes Received = 35ac80
Errors:
        Checksum   = 0
        Complement = 0
        Duplicates = 0
Image downloaded to buffer.
        [R]untime
        [D]iagnostic
        M[u]ltipe Image
        [L]oader (Warning: Are you sure what you are doing?)
        [Q]uit
Update Image File:r
Runtime Image Filename : SRW224G4P_SRW248G4P_image_v1020.bix
Updating file system.
File system update fail.
File Name                         S/Up Type Size       Create Time
All I got now after restarting the switch is:
File Name                         S/Up Type Size       Create Time
Factory_Default_Config.cfg          1    5        354 24:01:02
certificate                         0    8      18040 24:00:56
Free Space : 7602176
[X]modem Download [D]elete File [S]et Startup File
[Q]uit
Select>
Thnx in advance.

HT1349 iTunes will not start on my PC. I get a runtime error from the Visual C== runtime library when iTunesHelper.exe is started. The message states the application attempted to load the library incorrectly. How is the problem to be resolved?

iTunes will not start on my PC. I get a runtime error from the Visual C++ runtime library when iTunesHelper.exe is started. The message states the application attempted to load the library incorrectly. How is the problem to be resolved?

Click here and follow the instructions.
(99035)

There are afunction like Runtime.load(filename.so) but load a .class file?

I need build something like a plugin system: I get a string like "framework.plugin.FooClass" and "FooClass.class" file in run time, and I need to get a new instance of this one.
In code:
IPlugin plugin;
String className = "framework.plugin.FooClass";
plugin = (framework.IPlugin)Class.forName("framework.plugin.FooClass").newInstance();But I haven't this class in classpath. I see Runtime.load(filename.so) but look like only load native code, it doesn't? I'm on wrong way?
Thanks in advance,
Diego

Either put the plug-in's folder on the class path or use an URLClassLoader.

Load Balance method for proxy - ISA or BlueCoat

Hi,
I would like to know that which load balance method such as src-ip, cookie or etc is most suitable for load balancing proxy servers such as ISA or Bluecoat. The Proxy will listen to many services - http, https, ftp, and etc. Thanks for the help.

The methods you mentioned are not loadbalancing technics, but stickyness features.
Stickyness is not always necessary.
Now, for caching devices, it is good to always send users requesting a same object to a single proxy, so that the same object is not cached in all the proxies.
Therefore, the solution in this case is loadbalancing with url hashing.
For HTTPs, if you terminate SSL on the loadbalancer, you can use the same solution.
For all the other traffic, I would suggest to start with roundrobin and see after a while if it requires some adjustments or not.
Gilles.

Load Balancing Method

I want to lod balance two servers using CSS 11503. The requirement is to send all the traffic to Server1 untill it dies. Meaning that...Server2 will be sitting idle and only become active when Server 1 is not available. I am not sure which load balancing method should be used to acheive this result.
Any suggestions !!!!!

you should use the sorry server function.
Here is a link to a sample config.
http://www.cisco.com/en/US/products/hw/contnetw/ps789/products_configuration_example09186a0080093de8.shtml
Gilles.

LACP Load Balancing Method

We have two stack of 3750-X switchs interconnected through LACP, and a CheckPoint Firewall connected to one of the stack. The Firewall use a LACP bond to connect to the 3750-X Stack. On the Cisco switches we don't use any Layer3 functionality.
Since the switch are used in Layer2 mode, can we define the a load balancing method that use IP informations ?
For example Can we change the load balancing method from src-mac to src-dst-ip ?
BRgds

Hi,
yes you can choose the method of Load balancing in LACP:
port-channel load-balance {dst-ip | dst-mac | src-dst-ip | src-dst-mac | src-ip | src-mac}
Configure an EtherChannel load-balancing method.
The default is src-mac.
Select one of these load-distribution methods:
•dst-ip—Load distribution is based on the destination-host IP address.
•dst-mac—Load distribution is based on the destination-host MAC address of the incoming packet.
•src-dst-ip—Load distribution is based on the source-and-destination host-IP address.
•src-dst-mac—Load distribution is based on the source-and-destination host-MAC address.
•src-ip—Load distribution is based on the source-host IP address.
•src-mac—Load distribution is based on the source-MAC address of the incoming packet.

Best HTTP load balancing method

This is probably basic, but how satisfactory is this http load balancing method:
service http-1
ip address 192.168.1.10
protocol tcp
port 80
keepalive type tcp
active
service http-2
ip address 192.168.1.9
protocol tcp
port 80
keepalive type tcp
active
owner http
content web-domains
vip address 10.0.0.1
add service http-1
add service http-2
protocol tcp
port 80
balance leastconn
active
Should I rather use sticky-mask 255.255.255.255 or advanced-balance sticky-srcip?

It really depends what you are doing.
Some people will find this acceptable and for others it will just not work.
Do you need persistency ?
To answer this question check with your webserver admin.
does this website have a shopping basket ?
Finally, changing the sticky-mask is useless if you do not have sticky-srcip. So your question should be ..or .. but .. and ..
Anyway, it all depends what is required for your website to work.
You can try this config and if you run into problem capture a sniffer trace and identify the problem to see if a configuration change is needed.
Regards,
Gilles.

ORA-29516: Bulk load of method failed; insufficient shm-object space

Hello,
Just installed 11.2.0.1.0 on CentOS 5.5 64-bit. All dependencies satisfied, installation/linking went without a problem.
Server has 32GB RAM, using AMM with target set at 29GB, no swapping is occuring.
No matter what i do when loading Java code (loadjava with JARs or "create and compile java source") I keep getting the error:
ORA-29516: Error in module Aurora: Assertion failure at joez.c:3311
Bulk load of method java/lang/Object.<init> failed; insufficient shm-object space
Checked shm-related kernel params, all seems to be normal:
# Controls the maximum size of a message, in bytes
kernel.msgmnb = 65536
# Controls the default maxmimum size of a mesage queue
kernel.msgmax = 65536
# Controls the maximum shared segment size, in bytes
kernel.shmmax = 68719476736
# Controls the maximum number of shared memory segments, in pages
kernel.shmall = 4294967296
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
net.core.rmem_default = 262144
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max = 1048576
Please help.

Hi there,
I've stumbled into exactly the same issue for 11g. After I start the database up and I ran loadjava on an externally
compiled class (Hello.class in my instance) I got the following error:
Error while testing for existence of dbms_java.handleMd5
ORA-29516: Aurora assertion failure: Assertion failure at joez.c:3311
Bulk load of method java/lang/Object.<init> failed; insufficient shm-object space
ORA-06512: at "SYS.DBMS_JAVA", line 679
Error while creating class Hello
ORA-29516: Aurora assertion failure: Assertion failure at joez.c:3311
Bulk load of method java/lang/Object.<init> failed; insufficient shm-object space
ORA-06512: at line 1
The following operations failed
class Hello: creation (createFailed)
exiting : Failures occurred during processing
After this, I checked the trace file and saw the following error message:
peshmmap_Create_Memory_Map:
Map_Length = 4096
Map_Protection = 7
Flags = 1
File_Offset = 0
mmap failed with error 1
error message:Operation not permitted
ORA-04035: unable to allocate 4096 bytes of shared memory in shared object cache "JOXSHM" of size "134217728"
peshmmap_Create_Memory_Map:
Map_Length = 4096
Map_Protection = 7
Flags = 1
File_Offset = 0
mmap failed with error 1
error message:Operation not permitted
ORA-04035: unable to allocate 4096 bytes of shared memory in shared object cache "JOXSHM" of size "134217728"
Assertion failure at joez.c:3311
Bulk load of method java/lang/Object.<init> failed; insufficient shm-object space
It seems as though that "JOXSHM" of size "134217728" (which is 128MB) corresponds to the java_pool_size setting in my init.ora file:
memory_target=1000M
memory_max_target=2000M
java_pool_size=128M
shared_pool_size=256M
Whenever I change that size it propagates to the trace file. I also picked up that only 592MB of shm memory gets used. My df -h dump:
Filesystem Size Used Avail Use% Mounted on
/dev/sda7 39G 34G 4.6G 89% /
udev 10M 288K 9.8M 3% /dev
/dev/sda5 63M 43M 21M 69% /boot
/dev/sda4 59G 45G 11G 81% /mnt/data
shm 2.0G 592M 1.5G 29% /dev/shm
The only way in which I could get loadjava to work was to remove java from the database by calling the rmjvm.sql script.
After this I installed java again by calling the initjvm.sql script. I noticed that after these scripts my shm-memory usage
increased to about 624MB which is 32MB larger than before:
Filesystem Size Used Avail Use% Mounted on
/dev/sda7 39G 34G 4.6G 89% /
udev 10M 288K 9.8M 3% /dev
/dev/sda5 63M 43M 21M 69% /boot
/dev/sda4 59G 45G 11G 81% /mnt/data
shm 2.0G 624M 1.4G 31% /dev/shm
However, after I stopped the database and started it again my Java was broken again and calling loadjava produced
the same error message as before. The shm memory usage would also return to 592MB again. Is there something I
need to do in terms of persisting the changes that initjvm and rmjvm does to the database? Or is there something else
wrong that I'm overlooking like the memory management settings or something?
Regards,
Wiehann

SRW224G4P - " ERR Runtime Loading Fail - System Halt"

Hello everyone!
When I power up my switch (SRW224G4P), hyperterminal displays the following output:
Image Loader 1.0.1
Loading Diagnostic Image File : SRW224G4P_SRW248G4P_boot.bix
Diagnostic 1.0.1
* the screen then clears and displays *
User Mode
--- Performing Power-On Self Tests (POST) ---
DUMMY Test 1 ................. PASS
UART Loopback Test ........... PASS
POE UART Loopback Test ....... PASS
DRAM Test .................... PASS
Timer Test ................... PASS
Done All Pass.
------------------ DONE ---------------------
<ERR> Runtime Loading Fail - System Halt.
* no "auto-boot in 2 second" message is displayed *
Does anyone have any ideas what can be done to fix this error?
Message Edited by Vince_02 on 12-14-2009 10:52 AM

The SRW is now part of Cisco Small Business. You better ask your question in the Cisco Small Business Support Community. You'll find Cisco people over there...

Runtime loading of swc files, possible ?

what about runtime loading of external SWC asset libraries? Is there anyway of adding the SWC to the build path, but changing ‘merged into code’ to ‘external’ in order to have access to the library definitions when developing but without the library being compiled into your swf?

This link may help:
http://livedocs.adobe.com/flex/3/html/help.html?content=compilers_30.html
If this post answers your question or helps, please mark it as such.
Greg Lafrance - Flex 2 and 3 ACE certified
www.ChikaraDev.com
Flex Training and Support Services

3750X Port-Channel Load-Blanace method

I have a 3750X and I'm wondering what would be the best Port-Channel Load-Balancing method would be for my network.
switch(config)#port load ?
dst-ip       Dst IP Addr
dst-mac      Dst Mac Addr
src-dst-ip   Src XOR Dst IP Addr
src-dst-mac Src XOR Dst Mac Addr
src-ip       Src IP Addr
src-mac      Src Mac Addr
We have a few Layer 3 VLANs: Default, Servers, Clients, and Guests.
Some of our servers are LACP bundled.
So it would be mainly clients on the one layer 3 VLAN accessing the server on the other layer 3 VLAN.
We also have a few smaller switches that are trunked and LACP bundled back to the core 3750X.
Can anyone suggest which Load-Balancing method would be best for our situation?
Thanks!

The default load balancing method on the 3750 series is based on source-MAC address. This usually works fine in most cases. If you change it to something different than this, it will affect all your port-channels in that switch.
HTH

Help choose the appropriate etherchannel load balance method

Hi
I have 2 network architectures :case A and case B (found architecture below)
Case A : one server connected on the switch on each site
Case B : 3 server connected on the switch behind a router on each site
2 site are connected by 2 wireless link :each wireless link have 105 Mbps bandwith (I absolutly need the agregate bandwith 210)
Site headquarter is the principal site and site backup is use to backup data located on the principal site
I use Gbit cisco 2960 switch
I use etherchannel to agregate the 2 switch port (port 1 and port 2) where the 2 wireless link are connected
I configure src-mac for case A but all trafic is send only on one wireless link .
Please help me to choose the more appropriate load balance method to load balance traffic between the 2 link for the case A and for the case B
Please advise
Thanks in advance

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Your Case A might be handled by port hashing, but unfortunately most Cisco platforms don't support it.
Your Case B isn't much better, as you only have 3 hosts on each side, and according to your drawing, they are behind routers, so you don't want to use MAC hashes. If you don't have port hashing, next best choice might be src-dest-IP hashing. Again, though, with just 3 hosts, your distribution will likely not be very balanced, especially over shorter time intervals.
To obtain best utilization of your links, you need some kind of better link bonding, such as MLPPP (unfortunately, usually won't scale to FE rates) or a hardware MUX. Next best option, if you could route across the links, would be something like Cisco's OER/PfR which can dynamically load balance.

When trying to update apps i keep getting billing method incorrect(this is on iphone 4s) i hsve tried this store,apple id,view id,payment info but does not offer me the none option,i can npt update my phone any ideas anybody please?

when trying to update apps i keep getting billing method incorrect(this is on iphone 4s) i hsve tried this store,apple id,view id,payment info but does not offer me the none option,i can npt update my phone any ideas anybody please?

If you dont have none option then you must own itunes some money. So you have to enter the payment like a itunes giftcard. you can contact itunes by email by going to expresslane.apple.com

WS Console: Med Rec: Runtime loading of methods incorrect

Similar Messages

Maybe you are looking for