WS-ReliableMessaging when starting from WSDL

I'm trying to enable WS-ReliableMessaging for a service for which I started
from the WSDL. I used to start from the JWS file and so I just added the
@Policy annotation to enable WS-RM, but now I'm starting from the WSDL
(using the wsdlc ant task to generate the JWS and interface JWS) and I can
no longer enable WS-RM. I cannot add a @Policy annotation because then it
won't compile (because of the interface). I've also tried adding other WS-RM
(optional) annotations and even embedded the policy directly into the WSDL,
but no luck.
Does anyone know how to enable WS-RM when starting from a WSDL under
WebLogic?
Thanks.
Toon

Hi dvohra21,
The 3rd party has advice me tha the wsdl is not available on the specified ip:port on which the web service is running. If I make a call to the web service named "fvdbscan" as per your question, i.e., if i put the in a web browser http://192.168.1.4:1063/fvdbscan?wsdl , i get the following:
<SOAP-ENV:Envelope>
<SOAP-ENV:Body>
    <SOAP-ENV:Fault>
      <faultcode>SOAP-ENV:Client</faultcode>
      <faultstring>HTTP GET method not implemented</faultstring>
    </SOAP-ENV:Fault>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
Further more, as you can see in the atteched image, the "JDeveloper Test Web Service" i.e., the HTTP Analyser, option works fine when a call a funtion in the web servicce.
However, when I run the client, ( which as you can see has zero code expect for that generated by the JDeveloper wizard), it throws an excception, as showned below.
Here you can see the WebServiceClient generated by the JDeveloper wizard and you can see the urn it has created which is not valid.
Thank you for your attention.

Similar Messages

Firefox does not appear on screen when started from the start menu, but task manager says the process is running

Firefox does not appear on screen when started from the start menu or the shortcuts, but task manager says the process is running.

No - I get the message basically saying "Can't run program while Firefox is running. Please close down Firefox & try again".
I rebooted my computer and it all works now - but that's weird it was happening before. Kinda weirded out that it happened at all.
To avoid that happening again, I still wanna know what to do to avoid it or fix it for next time. Thanks

Audio only plays when started from the beginning?

Hi! I'm fairly new to flash, i'd consider myself a beginner, but recently i've been tasked with making an animation for someone! There is a song playing in the animation, it's a wav and it's on its own layer. There are also drawings i imported in too.
My problem is, i want to be able to sync up the little drawings to the words of the song, but the audio only plays when i start at 0 on the timeline. If i were to start at let's say frame 24, it won't play. Does anyone know how to fix this? This commission needs to be finished by Wednesday and it's a S L O W process, having to start it over only to hear like one or two words later on

change the sync property (in the properties panel after clicking the keyframe where your sound starts) from event to stream. retest.

Firewall blocks service when started from launchd

I run lighttpd (installed from MacPorts), and it is binded to port 80. I am trying to make the Leopard Firewall play nice with it.
The firewall is set to 'Set access for specific services and applications', and the lighttpd binary is on the list of applications set with 'Allow incoming connections'.
When I start the service manually, it works fine, and the firewall allows outside connections to port 80. However, I use the launchd script shipped with MacPort's lighttpd to run lighttpd on boot.
The firewall appears to block incoming connections to port 80 when lighttpd is started from the launchd script on booting, but allows incoming connections to port 80 when lighttpd is started manually from the Terminal.
Any idea how to get the firewall to play nicely with lighttpd when started via launchd?

Hi Steve,
Welcome to msdn forum.
Here are some references:
Enable keyboard layouts for different languages
How to change keyboard language in Windows
How to Change Your Keyboard from American to English
This forum is to discuss problems of Application Compatibility for Windows Desktop Development . Your question is not related to the topic of this forum.
Hey, Could ya read this before posting
to this forum? (plus main support link)
Hope this helps you.
Best Regards,
Eileen
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Firefox 15 crashing when started from Command line in Windows 15

I have been loading my work space via a batch file everyday for the past 4 years.
One of the apps I start is Firefox using the following command:<br />
@start /D"C:\Program Files\Mozilla Firefox\" firefox.exe
My batch file would run, and close with no issue.
As of Firefox 15, using the same command now ties Firefox to the console.
When I close the console, Firefox closes, when I open it again from the standard shortcut, I get the "Firefox has crashed"
I also notice that since upgrading to Firefox 15, some console.log calls go to the Windows Console while firefox is loading. Most notably is HTTPSEverywhere.
When I rolled back to Firefox 14, the issue disappeared

Hi,
I'm really sorry to have caused this regression.
Thanks for reporting this issue, I've done various tests before submitting my patch but I totally missed that issue...
It is now matter of getting my fix reviewed and landed, but in the meantime, I tried to craft an addon that would hopefully fix your issues.
You can download it here:
https://bugzilla.mozilla.org/attachment.cgi?id=660206
And follow the fixing progress here:
https://bugzilla.mozilla.org/show_bug.cgi?id=787313
++
Alex

Excecutable VI generating an error 222 on Keithley 2612A although its run properly when starting from labview 2009 directly

Dear all,
I have a VI which runs perfectly and I can control, a Keithley 2612A for transistor measurements.
The VI run well when I excecute it from the computer which has the platform Labview 2009 (XP OS)
The equipment (ie Keithley 2612A) is linked to another computer which don't have labview 2009.
I installed Run-time-engine 2009 (OS XP 32 bits) on this computer.
Then I create an excecutable of my VI with the "build application" option.
The excecutable VI starts normally on the computer but when I want to run it, I am getting an error message from the Keithley 2612A (which was not the case when I ran the VI directly from the computer haing Labview 2009 installed on it). The error message is 222 (ie parameter too long)
I thought that I did something wrong and I create an excecutable from an original VI from Keithley (ie without any change). I am getting the same error message.
When I create an excecutable with run time engine 2009 included (as it is possible to do it wiht LB 2009) , I am geeting the same error message.
So I need no to check step after step when the message happens but
Does anyone knows anything about such an issue ?
Thank you
Solved!
Go to Solution.

Dear all,
Just for those who might encounter a similar issue.
I found the solution after tackling all possibilities.
The source of the problem was (for unknown reason) that the country setting of the computer was wrong
and decimal numbers were written with a , instead of a point.
Since I reset correctly the country setting, the stand alone files are running normally.
Best regards
Youki

Error when Starting from PFILE

Hi!
I am in the process of setting up a standby database. The primary is also in the same host as the Standby.
When I create a pfile from the spfile of the primary and try to start the Standby database from the pfile, after changing the appropriate parameters, I get this error
SQL> conn sys/oracle as sysdba;
Connected to an idle instance.
SQL> startup nomount pfile = 'C:\oracle9i\oradata\STBY\initstby2.ora'
ORA-01031: insufficient privileges
But clearly I have connected as sys user... Please help me..
Thanks
Radhika

Radhika,
While creating the pfile for Standby d/b sis u issue the following command on the primary d/b :
- ALTER DATABASE CREATE STANDBY CONTROLFILE AS
'<path of the stdby control file>';
Can I also suggest you to refer to the Data Guard Concepts & Administration Guide. This guide gives a step by step procedure of what exactly a Data Guard configuration is all about and an example to set up a Data Guard Enviornment.
Also I belive since you are a SQL Server Administrator , its also import you go tthrough the Oracle 9i d/b Concepts guide. You do not want to be creating a MAA configuration directly without knowing Oracle internals.
If you have taken the time out to read both the Concepts Guide & the Data Guard guide & you are still facing problems get back on this thread.
Cheers...rCube

Xperia Z3 Compact camera error when starting from locked screen (symbol lock)

Hi
I'm a new owner of Xperia Z3 Compact and I have noticed a problem when launching camera. The app itself works perfectly well but when trying to launch camera from locked phone (screen locked with symbol) it shows only black screen with error message that camera app it unaccessible. After removing lock screen protection both camera symbol on lock screen and dedicated camera button works as intended. Is it supposed to be that way? On my previous phone I could launch camera app without unlocking screen but couldn't access any other parts of the phone. I'd love to have it working the same way here especially with the dedicated camera button.
Hoping for a fast answer.
Regards
Huma

You may need to perform a software repair using PC Companion.The process will erase all internal memory.You might need to charge your device for about 1-2 hours before so the device has at least 60% battery.
Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device).
Open PC companion->support zone->phone/tablet software update->repair my phone/tablet blue highlighted.Follow the steps given,do not connect your phone until prompted to press volume down while plugging USB cable. If PC companion does not start the repair process, you might need to run it in compatibility mode with Windows 7 (in some cases XP).
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

PLM search (wda_sea_qs) gives page not found when started from portal

In NWBC the PLM search works fine. For result it starts the result webdynpro.
We use PLM from the portal so I have created an iview for the webdynopro wda_sea_qs.
When I click on advanced search or search for something the navigation to the other webdynpro's is not working.
All we get is an new portal page with the message "page not found"
How can I configure the search to work correct from the portal?
Greetings
Rob

I found the answer via this link:
http://help.sap.com/erp2005_ehp_04/helpdata/en/1c/ffdf5fd56444748bb6af29d796d75a/frameset.htm
The iView should contain the following Application Parameter:
FRW_SYSAlias=<System>
This solved the problem.

Mac freezes, even when starting from CD.

I appreciate all help y'all can give me on this.
My friend has an Imac running OS 8.6, and he wanted to create an account for me on his network. He went to the compter's control panels, and a bunch of them were gone. Just gone. He had moved the folder with them the night before, and this mac's been having problems for a while, so he decided to repair it. He put in the Reinstall and Repair disk that came with the Mac, and started it up from that. He then deblessed the system folder, and was in the process of repairing it when the comp froze. Now whenever he turns it on (booted from the CD, of course), it starts up then freezes about 30 secondes after completeing startup. Is there any way to fix it, or at least recover the files on his hard drive? He really needs them...
Ian

Hi, Ian -
He should have full access to all his files when he boots to a CD; having a place to move them to on an iMac may be difficult, unless he has an external drive.
However, it may not be needful to do that, as Tony Spencer has alluded to. It is not difficult to re-install the OS with no loss of data.
To do that, he will need to use the Software Install CD that came with the machine, or an appropriate-version retail OS Install CD; do not use the Software Restore CD that came with the machine.
Boot to the Install CD, and perform a Clean Install of the OS. A Clean Install will not remove anything.
Article #58176 - Mac OS 8, Mac OS 9: Performing a Clean Installation

Color crashes when starting from "send to Color" from FCP.

Hi. I am a film student and am using Final Cut Studio to edit a short film.
It's been recorded in PAL Anamorphic. I edited it in FCP, and when I select the sequence and send it to Color, Color opens, and crashes while "Importing Final Cut Pro XML".
Color seems to load fine if I open it by myself, but when it imports the sequence from FCP it crashes.
If I try to do it again, it even asks if I want to overwrite the project. I accept and it crashes again.
I can launch Color and open the project file, but it has no video inside.
I don't know why this can be happening. I could use Color before (8min projects), and I could even use it today (30sec project), but the video didn't load completely (3 shots, only the one in the middle showing, the others had a cross over them). I sent a larger file, to see if the problem wasn't with the "starting" and "ending" shots, but it crashed.
I don't have any saved Color project to try. What should I do?
Thanks,
Rodrigo

Have you read the release notes for Color and made sure that there are no 'gotchas' in the sequence you are trying to send to Color?
There's a chance that there's something in the timeline that Color doesn't like. Take that out or depending on what it is, 'bake' it in and you will increase your chances of getting the Send To to work.
Good Luck!

My new MacBookPro makes a low grinding noise when starting from shutdown. It interferes with the normal startup music. Is this normal or should I take it back to the store, please? Thank you. Colin.

My MacBookPro makes a low grinding sound when it starts up from shutdown. Is this normal or should I return it to the store. The sound is not unlike the CD drive starting in my old computer. It kind of creeks. Thank you. Colin.

If it is a brief sound, perhaps a half second in duration, it may very well be the OS checking the internal optical drive. That is part of the OS startup process which is normal. Start your MBP and put your ear next to the optical drive and see if this is the case.
Ciao

C++ process hangs when started from Java

I am trying to execute a c++ code from java on a remote Windows machine. In order to deal with the remote part, I have created a Web service from where the actual command is run using Runtime.exec(). The c++ exe is not being called directly from the java code. I have a batch file that eventually calls the exe.
The problem is, both java and c++ processes hang. The java code on server side does handle the output stream and error stream. Also, the c++ code is logging everything in a file on Windows. The strange thing is that, when I remove the WS call and run the java code on server side as a standalone java program, it succeeds. Also, execution of the batch file alone does not hang. Here is the java code:
public class RunCPlusPlusExecutable {
public int runExecutable() {
    int exitValue = 0;
    try {
        Process p = null;
        Runtime rt = Runtime.getRuntime();
        System.out.println("About to execute" + this + rt);
        p = rt.exec("c:/temp/execcplusplus.bat");
        System.out.println("Process HashCode=" + p.hashCode());
        StreamProcessor errorHandler = new StreamProcessor(p.getErrorStream(), "Error");
        StreamProcessor outputHandler = new StreamProcessor(p.getInputStream(), "Output");
        errorHandler.start();
        outputHandler.start();
        exitValue = p.waitFor();
        System.out.println("Exit value : " + exitValue);
        if (exitValue == 0)
            System.out.println("SUCCESS");
        else
            System.out.println("FAILURE");
    } catch (IOException e) {
        e.printStackTrace();
    } catch (InterruptedException e) {
        e.printStackTrace();
    } catch (Exception e) {
    return exitValue;
class StreamProcessor extends Thread {
    private InputStream is = null;
    private String type = null;
    private InputStreamReader isr = null;
    private BufferedReader br = null;
    private FileWriter writer = null;
    private BufferedWriter out = null;
    StreamProcessor(InputStream is, String type) {
        this.is = is;
        this.type = type;
    public void run() {
        try {
            isr = new InputStreamReader(is);
            br = new BufferedReader(isr);
            writer = new FileWriter("*******path to log file********");
            out = new BufferedWriter(writer);
            String line = null;
            while ((line = br.readLine()) != null) {
                Date date = new Date();
                out.write("[" + type + "]: " + date + " : " + line);
                out.newLine();
            writer.flush();
        } catch (IOException ioe) {
            ioe.printStackTrace();
        } finally {
            try {
                if (br != null)
                    br.close();
                if (isr != null)
                    isr.close();
                if (out != null)
                    out.close();
                if (writer != null)
                    writer.close();
            } catch (IOException e) {
                e.printStackTrace();
String line = null;
            while ((line = br.readLine()) != null) {
                Date date = new Date();
                out.write("[" + type + "]: " + date + " : " + line);
                out.newLine();
            writer.flush();
        } catch (IOException ioe) {
            ioe.printStackTrace();
        } finally {
            try {
                if (br != null)
                    br.close();
                if (isr != null)
                    isr.close();
                if (out != null)
                    out.close();
                if (writer != null)
                    writer.close();
            } catch (IOException e) {
                e.printStackTrace();
The WS server is running from some admin user. And I have been running the standalone java program from some other user. It seems that the c++ executable is giving referenced memory error when being executed from WS call. There are pop-ups citing the error with OK and Cancel buttons(visible when logged in as admin). The error states
The instruction at 0x05473030 referenced memory at 0x000001d4. The memory could not be read
Any idea what is causing the problem and how to debug it? Why does this memory error comes only when the exe is run through WS call? Please note that I won't be able to debug the c++ code and the web service is an apache axis2 service.
Thanks

How can I know? Its your environment, not mine. The only thing we know is that when running the stuff through one path things blow up and when you run them through another path, things don't blow up. User rights is an obvious suspect, but not necessarily the actual problem. Generally when rights are the problem, you get some form of "access denied" exception, not a code hang.
Another likely possibility is that of network settings; perhaps your server goes through a proxy and your local applications do not, or the other way around.
Yet another likely possibility is that the version of Java used is different, or different versions of libraries are no the classpath causing differences in behavior. There is only one way to figure it out: get to know your environment very well and through solid reasoning and experimentation try to figure out where the breaking point is. It all starts with answering this question: what might be different in the environment of the web server, and outside of it? I can't know, only you can. Good luck.

Cannot interactively use VNC when started from a signed jar

I wrote a Java wrapper class to run a shell command to start a VNC client. Then signed it and started it using web start. In the jnlp file, I granted all permission. I could start the vnc viewer successfully but the issue is that the mouse and keyboard were disabled, so I couldn't intect with the applications. Anythought on it? Thanks in advance.

If I start it using from command line, javaws or as a web link, the keyboard/mouse didn't work. It might be security permission related.
Edited by: gao4321 on Jul 10, 2008 12:26 PM

No update-check on JNLP-file when start from other location than codebase

we are using JWS version 1.0 and 1.4.2.
Our clients have a common directory on the local disc which contains all the JNLP-files used in their organization. Some menu-links and some other applications are using this JNLP-files to launch and jump into the applications.
The JNLP-file repository is provided by an http-URL location. The JNLP-files in the local directory are directed by the codebase-attribute to this repository.
JWS processes the launch in following way:
1. read the codebase and href-attribute from the launched JNLP-file.
2. get timestamp from the original in the JNLP-repository
3. check if already cached and with latest timestamp.
4. download JNLP-file if not cached or not latest version.
5. check/download all other resources.
6. start the app.
With JWS shipped with JRE 1.5 (Beta was fine) this doesnt work in the same procedure:
1. copy the launched JNLP-file in the empty JWS-cache.
2. set a new timestamp on the cached JNLP-file (it does not let the old timestamp).
3. get timestamp from the original in the JNLP-repository (given with the codebase & href attribute)
4. check if already cached and with the latest timestamp.
5. download JNLP-file if not cached or not latest version. (will never appear because timestamp in cached version is newer)
6. check/download all other resources.
7. start the app. (with probably not latest resources)
Is this behaviour ok or is this a Bug?

hi Andy,
we tried with 1.5.0_04, 1.5.0_06 and 1.5.0_07 and it was always the same problem.
With the beta 1.5.0 (jawaws.jar's build.id = b64, 15/09/2004) it worked correctly.
Roland.

WS-ReliableMessaging when starting from WSDL

Similar Messages

Maybe you are looking for