WS20000263 Workflow configuration in Treasury (Business partner approval)

Hi Experts,
Currently we are doing an SAP Upgrade from 46C to ECC 6.0 (Enh. 4) and in Treasury we cannot solve a problem. There is a workflow (id: WS20000263) which is used in case when the BP is created or changed. This workflow was used in 46C, but in ECC 6.0 this is changed (in the new system the BP is managed in a different way as it was in 46C - Central Business Partner).
The problem is that the workflow is not working: I am not even able to do the proper configuration. There are some contradictory parts in SAP help which confuse me! (i.e.: in SPRO in "Active Release" config point, it says "activate the release object CBP SAP Business Partner". But the table - which contains this configuration point - is filltered for "ZBP" object, which means i can activate only the "ZBP" object and never the "CBP" object. The other point is that I cannot add "CBP" value in a "proper" way...)
I hope any of you faced with this workflow configuration and help me out or at least give me some advices.
Thanks in advance for your help!
Best Regards,
Attila

Hello Atrtila ,
Good Morning.
can you please tell me how your problem is solved.i am facing exactly the same issue in our system.exactly same thing.workflow release is getting triggered on changing any business partner role but not triggering at the time of creating a new line in business partner role .
please help.
Vijay Agarwal.

Similar Messages

Business Partner approval when changing payment term

Hi Expert,
Is it possible to set up approval process when user changing payment term in existing Business Partner?
Thank you in advance.

Hi,
Try this:
IF @object_type = '2' AND @transaction_type = 'U'
BEGIN
     IF EXISTS
     (SELECT T0.CardCode from OCRD T0 INNER JOIN ACRD T1 On T1.CardCode=T0.CardCode
WHERE CardCode = @list_of_cols_val_tab_del AND T1.GroupNum !=T0.GroupNum)
     BEGIN
           SELECT @error = 2, @error_message = 'Payment Terms should not be changed'
     END
END
Thanks,
Gordon

Configuration of Business partner

Dear SAP Guru's
i am new to SAP CRM. can anybody explain how to configure a Business partner.
is the procedure same for all sales , ecommerce, online sales and other.
Thank you in advance.
krishna

Hi,
From your statement it is still not very clear what exactly is the requirement. Are you look for initial configuration of the Business Partner with the backend ERP system ? Or are you looking for something else?
Business Partner is a master data and the same is applicable for all the scenarios,
MARKETING
SALES
SERVICE.
For a detailed description on the business partner, have a look at the following link:
http://help.sap.com/saphelp_crm70/helpdata/en/52/cff837a9aae651e10000009b38f8cf/frameset.htm
Thanks and Regards,
Samantak.

Error R1201 Business Partner does not exist (Treasury)

Please could you help.
I have created a Treasury Business Partner using transaction BPC1. When I display using BPC3, the partner exists.
I then create the Transaction Authorisations using TBI6.
However when I try to create a transaction e.g. through TX01, the error message says "R1201 Business Partner does not exist"
Any ideas or advice would be much much much appreciated, and points awarded accordingly.
Thanks in advance

The transaction code to Maintain Business partner is BP. I am not sure in which version you are.
When you create a BP it creates inthe role of Business Partner - Gen - 000000.
In order to create a transaction using a BP, they should exist in the role of Counterparty - TR0151. But since you say that you have maintained TBI6, then I thinkyou should have the BP in the role of counterparty. SO I am not sure what is wrong. If you can send screen shots, I can help.
Send it to my email id [email protected]

What is the importance of Only One Business Partner Allowed

Hi all,
We know that the Relation between BP and Contract account is :
1 BP : n CA.
If the above relation is true, I would like to know the importance of the configuration "Only One Business Partner Allowed" in the below path:
Financial Accounting(New) >>Contract Acounts and Recievables>>Basic Functions >>Contract Accounts >>Field Modifications>>Configure Field Attributes for Contract Account Category.
If we don't check the field for "Only One Business Partner Allowed" , Does it contradict to the 1BP : n CA relation ?
Regards,
Sai
Edited by: kantesai on Aug 10, 2011 10:35 PM

n BP : n CA relation is possible.
One BP must be account holder from all BPs of CA. Rest of BPs can be Alternate Account, Spouse etc.
Please check table FKKVKP from technical perspective, as both BP and CA are primary key. If it was 1 BP : n CA then there would have only VKONT been as primary key.
Thanks,
Murtuza

Business partner configuration steps in treasury

Reqiure Business partner configuration steps in treasury.
While creating business partner i get the message :Personal address doesnot exist.
How to rectify this?

No reply.Closed.

SAP Treasury Management-How to Config Tax codes for Business Partner

Hi SAP Gurus,
Please suggest me how to configure specific Tax Code and Tax relevant data for Business Partner in SAP Treasury Management while posting transactions with reference to any specific GL A/c. Kindly help me .
Thanks and advance
Regards
Shivan

Hi Appalas,
Check this link
Re: Linking of default taxes and discounts to BP
Tax Code
/people/arshdeep.singh/blog/2008/10/20/defining-a-new-tax-code-in-sap-business-one-2005-b-and-2007-b
Regards
Jambulingam.P
Edited by: Jambulingam P on Jun 22, 2009 12:39 PM
Edited by: Jambulingam P on Jun 22, 2009 1:20 PM
Edited by: Jambulingam P on Jun 22, 2009 1:21 PM

Very urgent: Doubts regarding CRM WORKFLOW OF BUSINESS PARTNER CREATION

HI ,
I HAVE DOUBTS REGARDING CRM WORKFLOW OF BUSINESS PARTNER CREATION, WHILE I AM CREATING BUSINESS PARTNER THROUGH R/3 , IT REFLECT IT INTO MYSAP CRM ALSO, AT THAT TIME IT SENDING THE MAIL TWICE TO THE RECEIPIENT. IS THERE ANY WAY THROUGH WHICH I CAN RESTRICT IT TO SEND THE MAIL ONLY ONCE,
PLZ SEND ME THE REPLY AS SOON AS POSSIBLE,
THANKS ADVANCED,

HI
WORKFLOW SEETING. SAP MAIL
MULTIPLE MAILS AND
ONLY ONCE CHOOSE
ONLY ONCE OPTION ON WHICH VERSION U R WORKING?
REWARD IF HELPFUL
VENKAT

Configurations to post 850 from Business partner to our SAP system

Hey Guys
i m doing a EDI 850 to IDOC scenario and need to send Functional acknowledgment back to the business partner.
The business partner sends us the Purchase order via VAN ,we do the message mapping within XI and then post it to our SAP R/3 system as ORDERS05.
so this scenario is a simple 850->XI->ORDERS05.
so i configured a Seeburger FTP sender adapter,gave the mapping name under modules tab ,configured a received IDOC adapter and posted the message to SAP R/3 system.
Now the issue is in sending the acknowledgement 997 back to the business partner.
My questions are:
1)How will the acknowledgement be triggered,is it automatically triggered or we need to do something with IDOC STATUS.SYSTAT01?
2)How will i configure my adapters to send the acknowledgement back to the Business partner.i guess i need to use split997,will it be configured as sender or receiver?
Thanx
Saif
Pl:I have gone through all the links on seeburger.

Hi Saif,
if you have to do a functional ack. This is a standard functionality available in Seeburger.
If you see your sender communication channel ther will be modules ....like
Classifer-> BIC>Spliter--->CallAdapter
the BIC will do the Main mapping (for the fun. ack. 997) and child mapping ( for your PO) and post two messages into XI server.
You can map the main mapping payload and send it back to the business partner as a functional acknowledgement (997)
if you are refering to Orders Ack. ie, the ack. of successfully posted Orders in the backend.
You have to trigger an outbound ORDERSP onces the inbound ORDERS05 idoc posted by maintaing the proper Out put types .
Map this outbound ORDERS idoc to EDI 855 structures and send it to the VAN of business partner.
Regards,
Sunil.

Business Partner Duplicate Check - Threshold Configuration

Hi,
I had setup the duplicate check for Business Partner in CRM system.
In SPRO -> SAP NetWeaver -> Application Server -> Basis Services- > Address Management -> Duplicate Check -> Activate Duplicate Check and Determine Limit for BAPIs, I understand the "Threshold BAPIs" is the percentage that determine which duplicate business partner similarity to be display in the Dialog Box.
E.g: If I set 80 in this box, then only business partner with similarity greater than or equal to 80% will display in the dialog box.
But, in SPRO -> SAP NetWeaver -> Application Server -> Basis Services- > Address Management -> Duplicate Check -> Set Limit for Duplicate List in SAP Dialog Boxes, I don't understand the value in "Threshold SAP Dialog Box" is configure for. The value that I had setup in here make no difference for me.
Does anyone understand how this threshold works in duplicate check? If yes, kindly please provide me an example for better understanding.
Thank you.
Regards,
Edison Wang

Hi,
Anyone that have experiences in BP Duplicate check, can help?
Thanks
Regards,
Edison

How to Create Approval for New Business Partner Master Data

Hello Experts,
Is it possible for creation of an approval query such that while creation of New Business Partner:
if
a user forgets to add data in a field say TIN No. which is present in Tax Information,
then
the Business Partner Creation is withheld and sent for approval .
Can someone please help me with creation of such an approval procedure ?
Thanks and Regards,
Manish Saluja

Hello Manish...
Sorry to say there is no way to create an approval template on master data (BP, item, etc). However, we once had a similar problem and used the Alert Management to catch critical information that was missing during the creation process. Everyone had to enter a credit limit with no exceptions. I do not have the exact SQL in front of me, but it went something like this...
Very simple...
SELECT
T0.CardCode,
T0.CardName,
T0.CreditLine
FROM OCRD T0
WHERE
T0.CreditLine IS NULL
Then we set an Alert Message to go off every minute and sent it to the Accounting Department. Although it did not STOP them from adding the Business Partner, it sure did give someone the heads up to call the person who created it after looking at the Change Log. Sort of a compromise...maybe that helps you???
Take care - Zal

Approval procedure for item and for business partner

Hi
Anyone has done somekind of approval procedure for an item or for a business partner?
Is there anyway to make this? Or just for documents?
Regards,
Vasco

You can only use SAP approvals for documents. You can construct a less controlled approval method for master items by first creating a BP mandatory "Approved" UDF", and using an auto refresh FMS to set it to blank unless "on hold" is checked when the BP record is created. This will prevent it from being used in documents. Then another UDF for an authorised user to initial the BP record as authorised and uncheck the hold flag. There is nothing to stop this method from being abused but you do have the History log so that you know who did what. I have not tested the exact procedure described but have done similar for documents (to force a save as draft) when the SAP Approval has been too restrictive. Otherwise it's SDK.

Approval Procedure for Specific Business Partner

Dear Experts,
Good day!
Is it possible that a certain approval procedure for credit memo will trigger only once a specific business partner is used?
Thanks!
Ashley

Yes, Ashley.
Its possible through Approval procedure based on query.
Please use below query for the same. replace hard coded vendor code with actual Vendor codes.
SELECT Distinct 'True' where $[$4.0.0] in ('V23000','V10000')
If you need to make it more systematic, then create one flag in BP master, "Approval required Yes/ No" and create a new query for this. So you need not amend the query later
Thanks
Unnikrishnan

Approval for individual Business partner problem

Hi Guys,
I am having a problem with an approval procedure for a single BP in SAP. I have created a query as below. This is based when a Sales orders with a business partner coded ZZZ004 is entered. Only this specific ZZZ004 should trigger the approval alert. This query below sort of work but it is triggering all business partner which is not what i need. Can someone point me what i need to change to trigger BP ZZZ004 to trigger the alert?
SELECT 'TRUE' AS Expr1
FROM OCRD T0
WHERE T0.CardCode ='ZZZ004'
Thanks

Hi Nick.........
Try this.........
Select Distinct 'True' From ORDR T0 Where T0.CardCode='ZZZ004'
And $[ORDR.CardCode]='ZZZ004'
This will help you to set the approval for particular Customer......
Regards,
Rahul

Release workflow for business partner

Hi, I want to implement a business partner release workflow like in ECC Financials.
Does anybody
a) know if it is possible or
b) has experience with a generical workflow
Thanks
Martin

Naval,
Either you can check SAP notes for the same or you can customize the workflow. If the event being triggered is different then copy the workflow and change the workflow start condition.

WS20000263 Workflow configuration in Treasury (Business partner approval)

Similar Messages

Maybe you are looking for