X Application won't display

Hi everyone,
I am having a bit of a problem getting my X application to display out. We
are building new Sun servers to replace the existing servers. The new
servers are running Solaris 9 with SGD 4.10.903 (with the builin
webserver). SGD and the App are running on the same server. The
application launches and you see the green cog on the webtop. It is
running on the server, but nothing displays out to the client.
This same application starts and runs fine on our existing servers running
Solaris 8 with SGD 3.42.
Any help would be greatly appreciated.
Thanks,
Mike.

Hi Sue,
No problems starting the application from dtterm, and no warnings or
errors. Application consitently comes back to my display.
Thanks,
Mike.
Sue Burton wrote:
Mike,
If you run dtterm through SGD and then start the application manually at the
command line do you see the same problem? Does this give you any
warning/errors
on the command line?
You could also run the 'xdpyinfo' and 'xset -q' commands from dtterm running
through SGD and
dtterm running on the console - compare the output. Look for supported
extensions
and font paths.
Regards
Sue
"Mike" <[email protected]> wrote in message
news:[email protected]...
David,
Session ends when ther are No visible windows. dtterm and xclock workfine.
Thanks,
Mike.
David W. Fong wrote:
Mike,
What's your Session Ends When setting? Can you try other ones?
Regards,
David
Mike wrote:
Carmelo,
SSH is configured properly and I am able to connect using either SSH
or
TELNET. dtterm, xclock, all come back just fine. The application gets
started and is running on the server, but never comes back to mydisplay.
Here are the launch details.
Thanks.
Starting...
Locating session...
...found session
Connecting to session...
Password:
Sun Microsystems Inc. SunOS 5.9 Generic May 2002
You have new mail.
wtmp begins Wed Aug 31 10:19
$ exec /bin/sh
$ [ -f /bin/ksh ] && exec /bin/ksh
Configuring your environment...
$ set o emacs ; set o gmacs ; set +o vi
$ OIT_FORCEWINMGR=OTHER; export OIT_FORCEWINMGR
$ DISPLAY=unix:11; export DISPLAY
$ ALTDISPLAY=server.domain.com:11; export ALTDISPLAY
$ TTA_UID="`LANG=C LC_ALL=C id | sed's/.*uid=\([0-9][0-9]*\).*/\1/'`";
export TTA_UID
$ TTA_USERNAME='.../_ens/o=organization/cn=xxxx'; export TTA_USERNAME
$ TTA_PRIMARY_DNSNAME='server.domain.com'; export TTA_PRIMARY_DNSNAME
$ TTA_PE_ID=''; export TTA_PE_ID
$ TTA_CLIENT_IPADDR='nn.nn.nnn.nnn'; export TTA_CLIENT_IPADDR
$ TERM=''; export TERM
$ TTA_PEERDNSNAME='server.domain.com'; export TTA_PEERDNSNAME
$ TTA_EXTDNSNAME='server.domain.com'; export TTA_EXTDNSNAME
$ if [ -f /etc/ttaprinter.conf ]; then . /etc/ttaprinter.conf; export
LPDEST; fi
Starting the application...
$ if [ -x /xxx/xx/script/startxxxx ]; then echo "Found"; else echo"Not
available"; fi
Found
$ trap "" 1
/xxx/xx/script/startxxxx < /dev/null > /dev/null 2>>
/tmp/stderr1833_server.domain.com_112861947290588.log || echo "exec
/xxx/xx/script/startxxxx exitcode: $? "& killpid="$killpid $! "
$ [1] 1846
$
[ -f /tmp/stderr1833_server.domain.com_112861947290588.log ] && rm -f
/tmp/stderr1833_server.domain.com_1128619472[1] + Done
/xxx/xx/script/startxxxx < /dev/null > /dev/null 2>>
/tmp/stderr1833_server.domain.com_112861947290588.log || echo "exec
/fnx/fx/script/startfcsh exitcode: $? "& killpid="$killpid $! "
$
90588.log
kill $killpid 2>/dev/null
$
...connected
STATE_PROTOCOL_INIT
Connecting to server...
Connected
Initializing session...
Starting session...
Waiting for application...
Done
Carmelo wrote:
Mike,
Are you using SSH as your connection method? If so have you
configured
it per
http://www.tarantella.com/documentation/sgd/ee/4.1/help/en-us/base/indepth/ssh.html
>>>>
>>>>
If still an issue can you post "launch details"
Regards,

Similar Messages

  • Problem description: My MacBook Pro is running really slow. Applications won't open or take up to 10 min.  EtreCheck version: 2.1.5 (108) Report generated December 27, 2014 at 9:15:58 PM CST  Click the [Support] links for help with non-Apple products

    Problem description:
    My MacBook Pro is running really slow. Applications won’t open or take up to 10 min.
    EtreCheck version: 2.1.5 (108)
    Report generated December 27, 2014 at 9:15:58 PM CST
    Click the [Support] links for help with non-Apple products.
    Click the [Details] links for more information about that line.
    Click the [Adware] links for help removing adware.
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Late 2011) (Verified)
      MacBook Pro - model: MacBookPro8,1
      1 2.4 GHz Intel Core i5 CPU: 2-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 384 MB
      Color LCD 1280 x 800
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Uptime: one day 6:55:8
    Disk Information: ℹ️
      TOSHIBA MK5065GSXF disk0 : (500.11 GB)
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      HD (disk1) /  [Startup]: 498.88 GB (5.04 GB free) (Low!)
      Core Storage: disk0s2 499.25 GB Online
      MATSHITADVD-R   UJ-8A8 
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /System/Library/Extensions
      [loaded] com.epson.driver.EPSONProjectorUDAudio (1.30 - SDK 10.4) [Support]
      [not loaded] com.seagate.driver.PowSecDriverCore (5.2.6 - SDK 10.4) [Support]
      /System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
      [not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.6 - SDK 10.4) [Support]
      [not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.6 - SDK 10.5) [Support]
      [not loaded] com.seagate.driver.SeagateDriveIcons (5.2.6 - SDK 10.4) [Support]
    Problem System Launch Agents: ℹ️
      [killed] com.apple.CallHistoryPluginHelper.plist
      [killed] com.apple.coreservices.appleid.authentication.plist
      [killed] com.apple.icloud.fmfd.plist
      [killed] com.apple.telephonyutilities.callservicesd.plist
      4 processes killed due to memory pressure
    Problem System Launch Daemons: ℹ️
      [killed] com.apple.ctkd.plist
      [killed] com.apple.icloud.findmydeviced.plist
      [killed] com.apple.ifdreader.plist
      [killed] com.apple.nehelper.plist
      [killed] com.apple.wdhelper.plist
      [running] com.seagate.TBDecorator.plist [Support]
      5 processes killed due to memory pressure
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
      [loaded] com.carbonite.launchd.carbonitealerts.plist [Support]
      [running] com.carbonite.launchd.carbonitestatus.plist [Support]
      [loaded] com.coupons.coupond.plist [Support]
      [loaded] com.hp.help.tocgenerator.plist [Support]
      [loaded] com.trendmicro.itis.dca.plist [Support]
      [running] com.trendmicro.itis.uimgmt.agent.plist [Support]
    Launch Daemons: ℹ️
      [failed] com.adobe.fpsaud.plist [Support]
      [running] com.carbonite.launchd.carbonitedaemon.plist [Support]
      [loaded] com.microsoft.office.licensing.helper.plist [Support]
      [running] com.trendmicro.icore.av.plist [Support]
      [running] com.trendmicro.icore.main.plist [Support]
      [running] com.trendmicro.icore.wp.plist [Support]
      [running] com.trendmicro.itis.plugin.plist [Support]
    User Launch Agents: ℹ️
      [loaded] com.adobe.AAM.Updater-1.0.plist [Support]
      [loaded] com.google.keystone.agent.plist [Support]
      [invalid?] com.jdibackup.JustCloud.autostart.plist [Support]
      [invalid?] com.jdibackup.JustCloud.backupstart.plist [Support]
      [loaded] com.trendmicro.itis.uninstaller.plist [Support]
    User Login Items: ℹ️
      iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      bomgar-scc-20130819-104735 UNKNOWN (missing value)
      bomgar-scc-20130905-143949 UNKNOWN (missing value)
      USB Display Agent Application (/Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app)
      WDDriveUtilityHelper Application (/Applications/WD Drive Utilities.app/Contents/Resources/WDDriveUtilityHelper.app)
      WDSecurityHelper Application (/Applications/WD Security.app/Contents/Resources/WDSecurityHelper.app)
      USB Display Agent Application (/Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app)
      bomgar-scc-20130819-104735 UNKNOWN (missing value)
      bomgar-scc-20130905-143949 UNKNOWN (missing value)
      HP Scheduler Application (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
      HP Product Research Application (/Library/Application Support/Hewlett-Packard/Customer Participation/HP Product Research.app)
    Internet Plug-ins: ℹ️
      SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Support]
      FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 [Support]
      CouponPrinter-FireFox_v2: Version: 5.0.5 - SDK 10.6 [Support]
      Flash Player: Version: 15.0.0.223 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
      QuickTime Plugin: Version: 7.7.3
      Default Browser: Version: 600 - SDK 10.10
    User internet Plug-ins: ℹ️
      npBcsMcTcIO: Version: Unknown [Support]
    Safari Extensions: ℹ️
      Trend Micro Toolbar [Installed]
    3rd Party Preference Panes: ℹ️
      Carbonite  [Support]
      Flash Player  [Support]
      Paragon NTFS for Mac ® OS X  [Support]
      Seagate Dashboard for Mac OSX  [Support]
    Time Machine: ℹ️
      Skip System Files: NO
      Mobile backups: ON
      Auto backup: YES
      Volumes being backed up:
      HD: Disk size: 498.88 GB Disk used: 493.84 GB
      Destinations:
      Jens Seagate Backup [Local]
      Total size: 999.86 GB
      Total number of backups: 6
      Oldest backup: 2014-06-24 10:33:56 +0000
      Last backup: 2014-12-17 17:14:18 +0000
      Size of backup disk: Too small
      Backup size 999.86 GB < (Disk used 493.84 GB X 3)
      My Passport for Mac [Local]
      Total size: 2.00 TB
      Total number of backups: 14
      Oldest backup: 2013-08-21 19:19:35 +0000
      Last backup: 2014-12-19 11:44:23 +0000
      Size of backup disk: Excellent
      Backup size 2.00 TB > (Disk size 498.88 GB X 3)
    Top Processes by CPU: ℹ️
          6% coreaudiod
          5% CarboniteDaemon
          4% iMovie
          3% JustCloud
          3% Wondershare Player
    Top Processes by Memory: ℹ️
      335 MB iPhoto Library Manager
      180 MB Finder
      142 MB iMovie
      70 MB Preview
      51 MB Microsoft Word
    Virtual Memory Information: ℹ️
      149 MB Free RAM
      1.04 GB Active RAM
      897 MB Inactive RAM
      1.17 GB Wired RAM
      30.53 GB Page-ins
      1.42 GB Page-outs
    Diagnostics Information: ℹ️
      Dec 26, 2014, 05:17:12 PM /Library/Logs/DiagnosticReports/iPhoto_2014-12-26-171712_[redacted].cpu_resourc e.diag [Details]
      Dec 26, 2014, 03:47:17 PM /Library/Logs/DiagnosticReports/CarboniteDaemon_2014-12-26-154717_[redacted].cp u_resource.diag [Details]
      Dec 26, 2014, 02:22:01 PM Self test - passed
      Dec 26, 2014, 11:48:03 AM /Library/Logs/DiagnosticReports/CarboniteDaemon_2014-12-26-114803_[redacted].cp u_resource.diag [Details]

    You have nearly run out of disk space.  Either purchase a larger one or start cleaning out the one you have?

  • Quicktime won't display the minimise, restore, close button options in windows microsoft, quicktime won't display the minimise, restore, close button options in windows microsoft

    Hi,
    I know there will probably be a simple fix for this.  Just about all the options in the file menu etc. are grayed out.  The usual minimise, restore, close buttons diplayed in microsoft windows applications are not displaying.  Would anyone be able to help me find out how to access these please?

    I'm doing the exact same thing.  Iphone 2g won't connect to the itunes store.  I get an error message saying the network connection timed out, but all diagnostics are OK.  I've turned off antivirus, firewall, check ie settings, uninstalled/reinstalled itunes... nothing has worked.  Have you had any luck?  And if so, what did you do? 

  • Preferences window won't display along with other windows.

    I am trying to edit my preferences. It only displays a little hint of a window with an X to close it. The same thing for reporting a bug. Basically I have not been able to get one popup application window to display.
    I am on Vista Ultimate x64 with dual monitors running in 2650x1600 resolution.
    Basically I can't even report the problem as a bug since that feature won't display the window either. Hopefully Apple is monitoring this board.

    The same thing is happening to me in XP. I couldn't even log on to this site as a window (probably asking to save my password) is popping up but all it shows is a small title bar with an X. No preferences, can't report bugs or even customize the toolbar.

  • IPhoto library won't display, "Loading Photos" endlessly

    Iphoto won't display the library, it shows the loading photos graphic endlessly. Tried deleting all relevant metadata (files in iphoto library folder and library>preferences) and repairing disk permissions, to no effect. Did not move or rename iphoto.app.
    Please suggest fikes for this issue and/or alternatives to iphoto.

    Welcome to the Apple Discussions.
    Tried deleting all relevant metadata (files in iphoto library folder and library>preferences)
    What files did you delete in the iPhoto Library Folder, exactly?
    Did not move or rename iphoto.app.
    Good to know, but the warning about moving/renaming does not refer to iPhoto.app but to the library:
    Don't change anything in the iPhoto Library Folder via the Finder or any other application. iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
    Regards
    TD

  • Store won't display search results, tabs dead

    Search results in iTunes Stoe (11) won't display all items (i.e. it reads "Total: 301 items" at the bottom of the list but only 16-20 will show up (depending on my luck). This is even true of, for example, a podcast show page itself. When I scroll down, there are empty lines where episode titles should go, but if I go all the way to the end, they suddenly disappear and the "Total: 301 items" jumps to the end of the 16-20 item long list.
    Categories within search results won't display either (i.e. I can see the "All," "Books," iTunes U" list on the right side, but clicking on each does nothing).
    Going from "Details" to "Ratings and Reviews" also requires clicking the tab and then reloading the page. My connection is fine, this has been happening for at least the last month at home, while out, using wifi and when drectly connected by old timey cables. Updated this morning, still no change.
    Help?

    This article has some tips
    http://support.apple.com/kb/ts1368
    (particularly under Troubleshooting on a Mac)
    If that does not help...  As a test, to narrow down the cause, you may want to create a new user account in System Preferences Users & Groups pane.  It can be Standard or Admin.  Log out and log in to the new user account (do not use Fast User Switching).
    Try running iTunes from the new user account, and accessing the iTunes Store. 
    If the problem does NOT occur in the new account, the cause is likely to be something in your primary user account.  For example, it could be user preferences settings, or something related to your iTunes library, or a background process that runs in your account that is interfering somehow. 
    If the same problem does occur in the new account, the cause is likely to be related to the overall OS, the iTunes application, or maybe network settings that block access to the iTunes Store.
    Either way, you'll be able better focus additional troubleshooting.

  • Flash builder 4.7 as plugin won't display asdoc

    Hi,
    on windows 7 x64, I just installed Flash Builder 4.7 x64 on my existing eclipse 4.2 x64 (using "the Adobe Flash Builder 4.7 Plug-in Utility") and the asdoc popup won't display anything but the current element. If I start the standalone Flash Builder, using the same workspace and same project, it works fine. Do I need to configure something else so it works as a plugin?

    My mistake...
    There was a typo into the XML application descriptor, that prevented the app to install properly on the device.
    Precisely, it wasn't a typo but raher a malformed <intent-filter> node. I launched adb tool from the console with adb install MyApp.apk command, and I saw this : Failure [INSTALL_PARSE_FAILED_MANIFEST_MALFORMED] in the terminal. From here it was easy to find the culprit.
    What would be cool is to have this feature inside the Flash Builder's Console panel.

  • TextEdit won't display recent files

    TextEdit won't display recent files!  THIS USED TO WORK-- but now all I see is the words (greyed-out) "Clear Menu".  Not even sure what that means.
    My recent files works fine in WORD and other applications that offer this.  Any comments appreciated as to how to get this feature back!
    Best regards,
    Steve Schulte
    Friday 22 March 2013

    Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
    Isolating an issue by using another user account
    If the problem is still there, try booting into the Safe Mode.  Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart. For each disable/delete, you will need to restart if you don't do them all at once.
    Safe Mode
    Safe Mode - About
    General information.
    Isolating issues in Mac OS X
    Troubleshooting Permission Issues
    Step by Step to Fix Your Mac
    Upgrade Nightmares  

  • Ipod won't display but music still plays and i can move around in menu...

    My Ipod mini won't display anything on the screen even after I reset it, I even hear the click type sound come from the headphones when its turned on. Right now I'm listening to music and the screen isn't showing anything is my screen broke???If it is what do I do???

    Open the iPod Software Updater application. It can be found by clicking on the Start menu, pointing to All Programs (Windows XP) or Programs (Windows 2000), and then point to iPod.
    It says that but in the computer I don't have an Ipod thingy in my programs???

  • After installing new HDD, some iPhoto Events/Photos won't display

    Problem: I upgraded to 1TB HDD a couple of days ago and tried to use the System Restore from Backup under Disk Utility. It never worked, got to a blue screen and just hung. So I reloaded Snow Leopard and then used Setup Assistant to move Apps/Files/Settings from my Time Machine Backup.
    Today I was going through files to see if anything was missing and found a number of Events from 2010 that wouldn't display in iPhoto '08, just dark squares but with the event name underneath.
    Rolling the mouse over the empty square displayed the correct number of photos for the event but photos wouldn't display.
    Next I "Browsed" the Time Machine Backup (from iPhoto) and the same Events were also empty on Time Machine Backups.
    The funny thing is the empty events are scattered meaning I have a full Events from Feb and March 2010 but empty events from Jan, Feb and May 2010. And then when I go into the Empty Events on Time Machine, I can call up the photo number but the photo won't display.
    Is there a way to recover these photos? I'm pretty sure there on the TM backup and also on my new HDD.
    As a "suspenders/belt" type person, I have the photos backed up on a Windows PC but rather work through this problem first.
    iMac 20" 2.4 Ghz Mac OS X (10.6.4) AEBSn AXg

    You can enter TM while in iPhoto and do a search for some of the missing photos by file name. When you find a version that appears to have them in exit TM, go to your Pictures folder, reenter TM, go to that version and restore the entire library. I'd keep both your current library and the restored. Then you can check to see if the missing photos are in the restored library.
    If neither library have all of the photos but do combined you can use the paid version of iPhoto Library Manager to merge the two libraries into a new 3rd library setting the option to not import duplicates. That should get you a complete library.
    OT
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

  • Director mx 2004 won't display Flash 8 swf files & other Flash media

    I have created a Flash 8 Project which has audio, video (which are converted to swf files fom flvs), flashpaper.  This application is driven by XML.
    However  this application works fine outside director, but when I import the main swf file into director mx 2004 and RUN it, director won't display the videos (but I can hear the audio from the videos), Director wont show graphic images(eg menu icon movie buttons, and flash buttons). Also I can launch external files (eg text file) from flash, but again it won't work via director.
    ANY SUGGESTIONS PLEASE

    ANY SUGGESTIONS PLEASE
    I suggest there's no need to shout.
    Try linking the Director cast member to the external swf file instead of fully importing it. You also should have the 10.1.1 update in place - this is particularly important.

  • Applications won't open after software update

    after i installed an automatic software update on my iBook G4, and did the restart, several applications won't open such as Safari, iTunes, iChat. I tried to reinstall the software update, but that won't open either. it just jumps up and down like normal, and then won't open. after i try again, it jumps only once. what the heck is happening??? and i'm not very computer smart so dumb it up for me

    Hello, and a warm welcome to the forums!
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5. Select your Mac OS X volume.
    6. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot.
    The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
    Some people get away without Repairing Permissions for years, some for only days.
    If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
    If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.

  • Dragon swipe still works but won't display any emoticons

    After the update a couple of days ago, my dragon swipe still works but won't display any emoticons or special characters, anyone have this problem or know how to restore the special characters?
    Subject line condensed by: Verizon Moderator <<>>

        Let's look further into this Quinta53! Have you tried powering the device off/on? If so, try clearing the application cache here http://vz.to/1hC0A2D test and share. Thank you.
    TominqueBo_VZW
    Follow us on Twitter @VZWSupport

  • Messages app won't display any windows

    My Messages app (v 7.0.1) intermittently won't display any windows, not even the Preferences. I've tried reloading the app from Time Machine, but it won't let me replace an the current version.
    I'm running a Mac Pro Quad-Core Intel Xeon 3.2 GHz under 10.8.5.
    Any ideas?

    HI,
    The Time Machine version needs to be the same version as is used in OS X 10.8.5
    This will be version 7.0.1 which came with the OS X 10.8.2 update.
    the Process should be to go to Applications and find the Messages app.
    Then use the Time Machine icon in the Dock.
    This will reduce the window and display the galaxy in the background.
    On the right are the arrows and dates for moving "back in time".
    The window should also have become "stacked" with those older versions behind.
    Changing the date should file through the stacked windows until the process finds a change to the Applications Folder.
    If you went back until a change in Messages you probably got the wrong version (or a version that will not work with a later version of the OS).
    Try this:-
    In any Finder window use the Go Menu whilst holding down the ALT key.
    Select the Library that now appears in the Menu list
    Navigate to Preferences.
    Find com.apple.ichat.plist
    Drag it to the Trash and restart the app.
    This .plist holds the windowing Info for the app.
    I am presuming you have tried the keystrokes seen in the Window Menu of Messages ?
    however it also holds all the info about the Preferences except for the accounts.
    This means any change you have made from the Defaults will be reset.
    The Messages section on Fonts and Colours is the most commonly changed.
    All the Alerts will be reset if you changed them.
    8:19 pm      Sunday; March 2, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • PSE8 Organizer won't display on monitor

    I have a really strange problem.  I have a new laptop running Windows 7.  I have a mouse, keyboard and monitor (among other things) attached to it via a port replicator so I can use the laptop as a desktop (whatever happened to good old docking stations?!?).  I have had all kinds of problems since installing PSE8, but this one baffels me.
    When I start up the Organizer, either from a direct shortcut to PhotoshopElementsOrganizer.exe OR through the Welcome screen, Organizer starts (and appears in the task bar) but only displays on the laptop screen.  It won't display on my monitor.  Now it worked a couple of times but then stopped working.
    I'm hoping there is a very simple solution!
    sue

    Edit > Visibility was set to Show All Files.  In Preferences, I unchecked all filter selections for Auto Analyze.  No effect.
    I have one folder with 3 .tiff files that PSE8 Organizer won't display.  Trying to import the files and PSE8 says they are there but PSE8 cannot display them.  No explanation.  Windows Photo Viewer and Picasa have no problem displaying them.
    I have deleted and made new catalogs with the same results for that folder.  I cannot figure out what is wrong with these files.  All other applications have no problem.
    Any ideas?
    Thanks!

Maybe you are looking for

  • Screen on Equium does not work but is fine on an external monitor

    My notebook will no longer display on its screen. I can only display on an external monitor.

  • ProClarity Desktop 6.3 on Windows 7 64bit.

    Hello,   I am trying to get proclarity to install on my window 7 64bit computer. I have gotten pass the installation was interrupted with the rename of some dll files.  But now I'm getting error 1723. Please help. Below is my install log, from procla

  • Help on Dependency using variant table.

    Hi Experts, I need your help in solving one dependency issue. I am using general task list (IA06 transaction) for service orders. This task list is general task list and not material specific. I have 2 operations. Op 10 is applicable for some materia

  • Charged for free apps?

    Hi I just got a blackberry curve and was just wondering, if I download free apps, will I still get charged for data or anything? I'm with Koodo and on my plan I have unlimited facebook, bbm, twitter, etc. but nothing for web browsing or anything like

  • Find and replace help needed, multiple variables

    Hi everyone, Im trying to find all urls in my code that start in a particular way but have a number variable at the end, see examples below <a href="/example/examplefolder/enquiry.asp?pid=123"> <a href="/example/examplefolder/enquiry.asp?pid=485"> <a