X crash the PC when exit from X (dixGetPrivateAddr: Assertion)

I installed Arch Linux on my new PC (had Arch on my 6 year old notebook for about 2 years) but each time I want to exit form X (KDE or TWN) crash the video output. The display switch to standby and the keyboard doesn't work any more, so I can't switch to a terminal.
My PC config:
Arch x86_64, new net installation up-to-date (pacman -Syu)
AMD X6, Radeon HD5830, dual head installation
I tried some AUR radeon-git driver (a lot of artefacts, exit from X works) , catalyst (closed source , radeon r300g on my notebook just rocks ). After all this installation of different drivers I set a new Arch Linux installation up (no KDE, only TWN). But the problem remains. With a remote ssh login I can access the crashed PC and shut it down or restart X and X starts again (now I can switch to a terminal until I exit again from X).
Terminal output when I start X over ssh:
abc@xsix ~]$ su root
Passwort:
[root@xsix abc]# startx
X.Org X Server 1.9.2
Release Date: 2010-10-30
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.35-ARCH x86_64
Current Operating System: Linux xsix 2.6.36-ARCH #1 SMP PREEMPT Sat Jan 8 14:15:27 CET 2011 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/disk/by-uuid/ed0f04ab-b16c-4a11-8c1b-175c25f7ddb1 ro
Build Date: 01 November 2010 10:29:19PM
Current version of pixman: 0.20.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 15 00:24:48 2011
(==) Using config directory: "/etc/X11/xorg.conf.d"
(II) [KMS] Kernel modesetting enabled.
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
xinit: connection to X server lost
waiting for X server to shut down XIO: fatal IO error 4 (Unterbrechung während des Betriebssystemaufrufs) on X server ":0"
after 1027 requests (1027 known processed) with 2 events remaining.
X: ../../../include/privates.h:122: dixGetPrivateAddr: Assertion `key->initialized' failed.
[root@xsix abc]#
Xorg log:
http://archlinux.pastebin.com/MaBAbWJL
no EE errors
Xorg config:
[root@xsix log]# cat /etc/X11/xorg.conf.d/20-radeon.conf
Section "Device"
Identifier "HD5830"
Driver "radeon"
EndSection
[root@xsix log]#
radeon is in /etc/rc.conf under MODULES and dbus is in DAEMONS, late KMS enabled.
Has someone an idea to solve this problem or has/had a similar problems with X,radeon,...? Any piece of information is welcome.
Last edited by devnow (2011-01-15 00:03:40)

After add Repo from https://bbs.archlinux.org/viewtopic.php?id=79509 and install
- dri2proto-git
- glproto-git
- libdrm-git
- mesa-full (replaces mesa, libgl and ati-dri)
- mesa-demos-git (optional: needed for glxinfo and glxgears)
- mesa-full-gallium (optional)
- xf86-video-ati-git
with Kernel 2.6.37 from testing (kernel26-drm-radeon-testing and linux-firmware-git not installed)
X don't crash any more
But exit from X isn't clean compare last few lines:
[root@xsix abc]# startx
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.9.3.901 (1.9.4 RC 1)
Release Date: 2011-01-07
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.36-ARCH x86_64
Current Operating System: Linux xsix 2.6.37-ARCH #1 SMP PREEMPT Fri Jan 7 17:32:33 CET 2011 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/disk/by-uuid/ed0f04ab-b16c-4a11-8c1b-175c25f7ddb1 ro
Build Date: 08 January 2011 11:24:47PM
Current version of pixman: 0.20.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 15 16:56:08 2011
(==) Using config directory: "/etc/X11/xorg.conf.d"
(II) [KMS] Kernel modesetting enabled.
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
xinit: connection to X server lost
waiting for X server to shut down XIO: fatal IO error 4 (Unterbrechung während des Betriebssystemaufrufs) on X server ":0"
after 1354 requests (1354 known processed) with 2 events remaining.
Now I will install KDE again and hope there are no wired artefacts with this driver.
Btw, is it possible to move this topic to Desktop Environments?

Similar Messages

  • My iPad 1 now crashes the PC when it is connected to sync?

    My iPad 1 has been going fine but has now started to crash the PC when I connect to to sync. I am runing Windows XP. I have cleared space on the hard drive and reset the iPad but no still no good. Any ideas?

    Hello Natashasophie,
    It sounds like the iPad was restored, if the information was removed in the process. If the iPad was restored from iTunes or iCloud 2 times and the issue persists, then I would recommend resetting the device with this process.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    From: iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
              http://support.apple.com/kb/ht1430
    All the best,
    Sterling

  • I have seven(7) podcasts on my iPhone 4 that iTunes will not delete. iTunes copies them from the phone to the library and will not  delete them from the phone when deleted from the library.

    I have seven(7) podcasts on my iPhone 4 that iTunes will not delete. iTunes copies them from the phone to the library and will not delete them from the phone when deleted from the library. I have replayed the podcasts over and over and they still won't delete. Podcasts are WSJ Tech briefings.

    This happens to several of my podcasts whenever an updated iOS comes out. You can delete the episode directly from the phone by swiping it from left to right. That seems to fix the issue (they drop off the phone and dont reappear on iTunes). It's as if iTunes stops tracking the play count for some shows.
    Hope this helps!

  • Accessing the Logon User Exit from the Internet using an ITS Service

    I can access the Logon User Exit (EXIT_SAPLSUSF_001) from R/3, but not from the Web using an ITS service. What am I missing in order to access the Logon User Exit from the Web. The ITS service was created from an ABAP screen program.
    Thanks
    david yee

    The SAPGui logon exit is called after successfull authentication has been completed and after a SAPGui session has been attached.
    If you logon via RFC, WebGui, ICM or the Wgate then this exit does not trigger.
    What are you wanting to add to your code after the logon ?
    An solution I have used is to create a wrapper RFC for a BAPI and create a webservice for the wrapper. Before calling the BAPI you can do whatever you want to from a security perspective.
    But for that you need to have an appropriate BAPI...
    Please explain what you want to do and what you would have wanted in the exit. Often there is a better way.
    Cheers,
    Julius
    ps: I moved this to the security forum.

  • Bring Excel 2007 to the front when called from LabView v9 in Windows 7

    I am building a duplicate system using Windows 7, LabView v9 and Excel v2007.  The original system used WinXP, Excel 2007 and LabView v8.6.  The issue is that the original system was able to bring Excel to the front when called from Labview using the property node -application-> visible.  This new configuration runs Excel, loads the data, runs the macros but does not bring Excel to the front.  The icon blinks in the Win7 taskbar and when selected displays over LabView.  If I minimize the Labview window, Excel is there.  This leads me to conclude that Excel is visible, as requested but will not come to the front until selected from the taskbar.  The only differences, besides the versions, is the original system template files used the .xls extension in and was run in Excel in compatible mode.  At the customers request, the new system uses the .xlsm extension on the Excel template files.  I have tried using application.visible = True in the macro as well.  Could be a setting in Labview?  Could be a setting in Excel? Could be .xls vs. .xlsm? Or an issue with Windows 7 and the newer version of Labview. 
    HP workstation - Labview v9 - Windows 7 - Excel 2007 sp2
    Thank you in advance
    Stephen
    Solved!
    Go to Solution.

    I will try the windowstate change.  Were these done in succession? (i.e. property node -> property node -> property node) Or were they done along the way such as call the ActiveX open and a property node then in a worksheet modification area etc. so there was some time between calls? 
    I am not sure about the API since the discussion there is with regard to DDE.  (Taken from the link document:  If you want to call a DLL that contains ActiveX
    objects, use the Automation
    Open VI with the Property
    Node and the Invoke
    Node.).  I am calling Excel as an application not as a library call unless I am mistaken, which I could certainly be.  Are you thinking that once Excel is active through the Automation Open VI that a DLL call to set the application visible would work?  I may be trying this already but in Excel through the use of the macro I call from LabView.  It contains application.visible = True at the beginning before reading files and plotting data.  
    I may try sprinkling Property node with application->visible in various locations in the LabView diagram as I do update cells after the call to the plot macro.  The puzzle for me is the blinking Excel icon in the task bar.  This means active and running but not visible or something wrong as well.  There are a few #VALUE cells if not all test in the system are run.  Again not a problem in Excel 2007-WinXP-LV8.6
    Thank you again one and all.

  • How can I keep the formatting when converting from Word to pages?

    How can I keep the formatting when converting from Word to pages?

    Use only formatting that is supported (in the same manner) in both applications. You'll need to find which that is through trial and error. Beyond those formatting options, you'll need to do some corrections, as Fruhulda suggests.
    Regards,
    Barry

  • I just purchased a new Linksys E2500 router.  It will connect to all my other devices, but does not recognize the password when sent from the PowerBook G4.

    I just purchased a new Linksys E2500 router.  It will connect to all my other devices, but does not recognize the password when sent from the PowerBook G4.  When I try it responds that the password is invalid.  I have connected my MacBook Pro, iPad and iPod Touch with the same password. 

    Charles Swigart wrote:
    It will connect to all my other devices, but does not recognize the password when sent from the PowerBook G4.
    Try putting $ (a dollar sign) in front of the password.

  • Primusrun crashes the system on exit

    Hi there im using bumblebee on my laptop for the optimus support.
    When i run any graphical application through bumblcee it crashes the whole system when i exit it.
    for example:
    $primusrun glxgears
    It works and diplays it, but when i press ESC to exit, it freezes, crashes the system.
    These are the logs from the crash.
    Thnx for the help
    ago 24 01:17:59 Archpire bumblebeed[228]: [ 794.744022] [ERROR][XORG] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: P
    ago 24 01:17:59 Archpire bumblebeed[228]: [ 794.744013] [ERROR][XORG] (EE) Failed to load module "mouse" (module does not exist, 0)
    ago 24 01:17:59 Archpire bumblebeed[228]: [ 794.744001] [WARN][XORG] (WW) Warning, couldn't open module mouse
    ago 24 01:17:59 Archpire bumblebeed[228]: [ 794.743990] [WARN][XORG] (WW) NVIDIA(0): Unable to get display device for DPI computation
    ago 24 01:17:59 Archpire bumblebeed[228]: [ 794.743978] [WARN][XORG] (WW) Unresolved symbol: fbGetGCPrivateKey
    ago 24 01:17:59 Archpire bumblebeed[228]: [ 794.743968] [ERROR][XORG] (EE) Failed to load module "mouse" (module does not exist, 0)
    ago 24 01:17:59 Archpire bumblebeed[228]: [ 794.743962] [WARN][XORG] (WW) Warning, couldn't open module mouse
    ago 24 01:17:59 Archpire bumblebeed[228]: [ 794.743954] [WARN][XORG] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or d
    ago 24 01:17:59 Archpire bumblebeed[228]: [ 794.743949] [ERROR][XORG] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: P
    ago 24 01:17:59 Archpire bumblebeed[228]: [ 794.743943] [ERROR][XORG] (EE) systemd-logind: failed to get session: PID 4783 does not b
    ago 24 01:17:59 Archpire bumblebeed[228]: [ 794.743925] [WARN][XORG] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/7
    ago 24 01:17:59 Archpire bumblebeed[228]: [ 794.743897] [WARN][XORG] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/1
    ago 24 01:17:58 Archpire kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [P
    ago 24 01:17:54 Archpire kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [P
    ago 24 01:17:54 Archpire kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [P
    ago 24 01:17:54 Archpire kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [P
    ago 24 01:17:54 Archpire kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [P
    ago 24 01:17:54 Archpire kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [P
    ago 24 01:17:54 Archpire kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [P
    ago 24 01:17:54 Archpire kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [P
    ago 24 01:17:54 Archpire kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [P
    ago 24 01:17:54 Archpire kernel: nvidia 0000:01:00.0: irq 50 for MSI/MSI-X
    ago 24 01:17:54 Archpire kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.32 Tue Aug 5 20:58:26 PDT 2014
    ago 24 01:17:54 Archpire kernel: [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 1
    ago 24 01:17:54 Archpire slim[257]: xf86: found device 1
    ago 24 01:17:54 Archpire slim[257]: removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1 /dev/dri/card1
    ago 24 01:17:54 Archpire kernel: vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
    ago 24 01:17:53 Archpire kernel: bbswitch: enabling discrete graphics

    Hi!! take a look and see if you have this version of packets:
    intel-dri-10.2.6-1-x86_64.pkg.tar.xz
    lib32-intel-dri-10.2.6-1-x86_64.pkg.tar.xz
    lib32-mesa-10.2.6-1-x86_64.pkg.tar.xz
    lib32-mesa-libgl-10.2.6-1-x86_64.pkg.tar.xz
    mesa-10.2.6-1-x86_64.pkg.tar.xz
    mesa-libgl-10.2.6-1-x86_64.pkg.tar.xz
    I had the same issue since they were updated.
    Now I have downloaded to version 10.2.5-1 and solved the problem.
    Let me know
    Sorry about my english...

  • Error when exiting from ANY JavaFX app. (any workaround?)

    I've had an ongoing problem when working with JavaFX, and even using applications created with it like SceneBuilder and FXExperience tools. As I reported in this bug: http://javafx-jira.kenai.com/browse/RT-27458 , any time I exit from any application that uses JavaFX, I get an error. My bug turned out to be a duplicate, and looking at the other report, it seems to be a result of the combination of the ATI-Radeon graphics card, Ubuntu, and JavaFX. It doesn't seem to matter whether the app is solely JavaFX, or embedded in Swing, whether it is installed as a native bundle or run directly from class files, or an executable jar. If it uses JavaFX and I run it, when I close it I get this error. It also doesn't matter whether I use jdk7 or an early-access build of jdk8.
    This is becoming increasingly irritating as I further explore the technology and begin trying to work with it, going beyond simply following tutorials and whatnot, because it means I frequently run my programs to see if they actually work, and am much more frequently using tools like SceneBuilder. It doesn't seem to matter whether I run things from the command line, start them from an IDE, or in the case of installed applications, run them through Ubuntu's Launcher or Dash, when I exit I get an error message and an error log shows up somewhere. Especially when testing an application I'm working on, these logs quickly clutter up my directories and become an annoyance.
    Does anyone have any suggestions or workarounds which might help avoid some of the annoyances from the problem? I have the ability to dual-boot Windows 7, and as the problem becomes increasingly annoying, have given some thought to doing my development there. However, I'm really not very comfortable in Windows, and it would involve making some pretty big changes to my workflow, so this isn't my favorite option.
    I imagine that using another distro like Linux Mint would probably continue to have the same issues, since I think it would be using the same drivers for the graphics.
    Changing computers is not currently an option for me. I'd love a Mac to develop on, but that's just not possible currently.
    If anyone has any ideas, suggestions, workaround or tips I would greatly appreciate them. Thanks in advance for your help.

    Okay. Do you have any third-party iTunes plug-ins/add-ons installed?
    (They can sometimes produce similar symptoms if they were written for an earlier version of iTunes, and they aren't liking a new version ... last time I can think of a major outbreak of add-on-related crashes-when-quitting was with the transition from iTunes versions 6.0.x to 7.0.x, though.)
    If so, the following document might be of some assistance:
    Troubleshooting issues with 3rd-party iTunes add-ons

  • My keynote is very slow when exiting from a slideshow, why

    Anyone else suffering from keynote acting very slowly when exiting a slideshow?

    Yes it's slow in Mavericks, not in other OS versions.
    The software is only weeks old so there are many issues with both products.

  • Firefox crashes windows 7 when recovering from sleep mode

    Similar to the following:
    http://support.mozilla.com/pl/forum/1/627872?s=window+7+crash&as=s
    but not sure whether it depends on pages that are currently opened.
    Sometimes, when recovering from sleep mode on win7 (with only Firefox and VS2008 running), win7 crashes. What's important - It doesn't happen always, but still, it's annoying (Firefox starts with startpage only).
    I've been noticing this issue on different Firefox versions from Firefox 3.5 to 3.6.6.

    Same exactly problem here, very annoying when the computer goes to sleep mode and then Firefox locks up.

  • How to avoid the dialogue when converting from context menu

    This is a follow-up to http://forums.adobe.com/message/2016146#443364 which was locked due to a bug.
    i would like to know how i can avoid the 'save as' dialogue when using the context menu to convert a word file to pdf using windows XP/acrobat 8/word 2007.
    so far, it always prompts me for the filename, which is annoying as it does not allow me to batch-convert several files and let the thing run its course.
    the solution provided by Steve in the other thread does not work - even if the plugin from word does not propt for a filename, it still does when triggered from explorer/context menu.
    so back to square one: how to avoid that dialogue when not opening word at all?
    cheers, thanks for any help. michael

    For a permanent change, START>PRINTERS>right click on Adobe PDF printer and select properties>General>Printing Preferences>Adobe PDF Settings. Under the settings tab, uncheck the box related to asking for a name. Pretty sure that is the location, but it may vary with version.

  • How to print within the margins of the page when printing from iPad to HP Envy D410a?

    When I try to print something from the iPad, either the 1 or the 2, the result is that the image sent from the iPad is printed Borderless, which of course results in parts of the print being cutoff, is there someway to resize the print through the printer, since the iPads don't have drivers?
    Also, I seem to have a similar problem when printing from my PC, only in it's case the resulting print is smaller, it seems to print into a margin size of 1" on all sides. The only app that I have found that lets me override this is Adobe Reader which has the page scaling options.
    All suggestions will be appreciated. TIA.
    Stephen.
    This question was solved.
    View Solution.

    You may download HP iPrint software to edit margins & borders:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01616126&lc=en&cc=au&dlc=en&product=4073738
    Although I am working on behalf of HP, I am speaking for myself and not for HP.
    Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
    If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
    Happy Troubleshooting : )

  • EmptyStackException when exit from nested page flow on SP2

    I have tried to call a nested page flow (TestNestedController.jpf) from page flow
    and using redirect="true". After exit from nested page flow, it supposes that
    return to the action testNestedDone() in page flow(TestPageController). It works
    on SP1, but it fails on SP2.
    Please suggest any solutions for this issues.
    public class TestPageController extends PageFlowController
    // Uncomment this declaration to access Global.app.
    // protected global.Global globalApp;
    // For an example of page flow exception handling see the example "catch"
    and "exception-handler"
    // annotations in {project}/WEB-INF/src/global/Global.app
    * This method represents the point of entry into the pageflow
    * @jpf:action
    * @jpf:forward name="success" path="page.jsp"
    protected Forward begin()
    return new Forward("success");
    * @jpf:action
    * @jpf:forward name="success" path="/test/testNested/TestNestedController.jpf"
    redirect="true"
    protected Forward goToNested()
    System.out.println("go to nested redirect = true");
    return new Forward("success");
    * @jpf:action
    * @jpf:forward name="success" path="index.jsp"
    protected Forward testNestedDone()
    return new Forward("success");

    The error message like this:
    Empty nesting stack for returned action BackToPrevious from Page Flow /xxxx/viewMemberController.jpf.
    com.bea.wlw.netui.pageflow.EmptyNestingStackException: Empty nesting stack for
    returned action BackToPrevious from page flow /xxxx/viewMember/viewMemberController.jpf.
    at com.bea.wlw.netui.pageflow.FlowController.forwardTo(FlowController.java:1103)
    "patrick" <[email protected]> wrote:
    >
    I have tried to call a nested page flow (TestNestedController.jpf) from
    page flow
    and using redirect="true". After exit from nested page flow, it supposes
    that
    return to the action testNestedDone() in page flow(TestPageController).
    It works
    on SP1, but it fails on SP2.
    Please suggest any solutions for this issues.
    public class TestPageController extends PageFlowController
    // Uncomment this declaration to access Global.app.
    // protected global.Global globalApp;
    // For an example of page flow exception handling see the example
    "catch"
    and "exception-handler"
    // annotations in {project}/WEB-INF/src/global/Global.app
    * This method represents the point of entry into the pageflow
    * @jpf:action
    * @jpf:forward name="success" path="page.jsp"
    protected Forward begin()
    return new Forward("success");
    * @jpf:action
    * @jpf:forward name="success" path="/test/testNested/TestNestedController.jpf"
    redirect="true"
    protected Forward goToNested()
    System.out.println("go to nested redirect = true");
    return new Forward("success");
    * @jpf:action
    * @jpf:forward name="success" path="index.jsp"
    protected Forward testNestedDone()
    return new Forward("success");

  • PowerBook 17 crashes consistently, even when booted from Tiger DVD

    We have a new PowerBook 17 that has started giving us problems in the last day or so. It will hang after running for a few minutes. This is a consistent problem - it doesn't go away for an hour, or a day - if the machine is running, it will hang. There is no kernel panic, no dialogue box, the trackpad, mouse, etc. simply stop responding (the clock freezes too, so I know the system is hanging up - not just input devices).
    I've managed to run throught most of the normal trouble-shooting methods, I say "managed" because the machine froze when I was booting into single user mode. So I went to the Tiger DVD that shipped with the laptop. Upon getting to the language selection dialog box - it froze again (no mouse, keyboard activity, etc.). Eventually, the machine did boot from the startup DVD - and I ran disk utility. Of course it found no problems with permissions or the disk because this is apparently hardware related, no?
    That being said, an archive and install will probably do us no good. But would Tech Tools (came with our AppleCare) manage to at least spot a Hardware issue? At this point, the only thing I haven't done is removed the third-party RAM we installed (which has been installed for nearly two weeks with no sign of conflict). That will be the next course of action and we'll run Tech Tools. Any ideas or suggestions regarding this issue would be greatly appreciated. We all know that being down one machine is not a good thing - thanks in advance for any assistance.
    PowerBook G4 17" 1.67 Ghz Mac OS X (10.4.5) Might Mouse, 1.5 GB RAM, 100 GB HD
    PowerMac G4 Mac OS X (10.4) 20" Cinema Display - 2G 20GB iPod - much, much more

    David,
    I always had a pristine system: no kernel panics, no system hangs. Then, one day I started to have kernel panics and hang ups and when I tried to install XCode it failed, then I couldn't install iWork '06. At first I thought it was a problem with the disk until I decided to run Apple's hardware test. After all, it was just a problem with one of the 512MBs memory DIMMs. Removed the offending DIMM and everything went back to normal.
    So, I think you should try the hardware test. To do this just start up from the original installation disk while pressing the option key and then choose Apple Hardware Test from the available startup disks.

Maybe you are looking for

  • Email is not working properly and dvr is freezing.

    I never thought I would say this but I am considering going back to cable. I have been calling verizon for 2 weeks now. My email is not working. I did not get any email for about 3 days, then when I called I got a couple (I normally get about 70 per

  • BAM / BPM integration (11.1.1.2.0)

    Hi all, I'm trying to integrate 'BPM instances with BAM Reports. I have done all the initial works (BAM credentials in application server, Clear DisableActions, Creating Business indicators, etc ) When I invoke the BPM incident from bpm/workspace it

  • Conditional Formula in Customer Statements

    Hi Experts, I would like to be able to show various different office addresses in the header of my customer statements. The addresses are dependent on GroupCode of the BP.  ALL the statements are printed by the same user, so I cannot use different st

  • Where can I find an official online documentation for JSP?

    I'd like a JSP documentation like the one PHP has. Does JSP official online documentation exist? if so, what's the link?

  • Message control - RV_MESSAGES_MAINTENANCE

    Hi, I am using the  Function module 'RV_MESSAGES_MAINTENANCE'  to add the message control for Ztransaction. By passing the procedure value (Z00001), I am able to restrict the output types to assign for ZTransaction else the transaction accepting all