X-FI and 4 point Digital Speaker system

I have the Cambridge Soundworks speaker system that has digital inputs. I know its an older system but i am wondering if there is any other way to enable the 4 point digital without having to resort to analog cables?
The only option under the digital settings are headphones and 2/2. speakers. Did Creative forget about the Cambridge line that supports 4 speaker digital?
I have tried different settings including configuring for 4/4. speakers and enableing digtal yet my 2 front speakers are carrying all 4 channels.
if there is not a solution.. can anyone tell me where i can get the analog cables for a 4. speaker system?
I got rid of mine a long time ago once I upgraded to the Soundblaster LIVE! X-Gamer.
Other then that the X-FI sounds awesome.. just wish i had my digital 4 point surrond.
thanks

Well, the Li've! and Audigys use a proprietary 4-pole connector which can carry 8-channels, while also being compatible with 3-pole 2-channel stereo-minijack-like SPDIF. I am not really sure about it, but the Flexijack is most probably a normal 2-channel connector.
If anyone has this configuration testing would be enlightening. You should be able to get the 2 front speakers to work properly, but the rears may be the problem. (And do the 4-channel test, because the FPS will default to copy the front sound to the rears if there is no rear input ).
But the question is, would quality be better? I doubt it, the DACs in the FPS2000 are quite old and I think their SNR will actually be lower than the ones on the X-Fi.
Also, I don't think EAX will be different with or without the digital connection. It worked fine with my Li've! card and I had no problems.

Similar Messages

FPS2000 Digital Speaker System

I currently have an FPS 2000 Digital Speaker System, with an Audigy 2 Platinum sound card on a Win XP system.
The subwoofer itself has no input jack to connect from the Audigy 2, but there is a Digital DIN connector on the subwoofer that will connect ALL speaker channels to the sound card. Is there a cable available that will do this with an Audigy 2? If so, where can I buy one? Also, I'm currently planning on buying a new Win7 Pro system.
Will I be able to use the Audigy 2 and FPS2000 speakers in Win 7 Pro's XP mode?

Ah, I have just found the cable here :-
http://us.creative.com/products/product.asp?category=3&subcategory=58&product=0374
Unfortunately this is only in the US shop (who don't ship abroad) so I guess we Europeans will have to make do with some old string and hope for the best...

Want to Hook up my MacBook Pro to an audio receiver and its own speaker system

Hi there. I saw this receiver on the Best Buy site, from Insignia: http://www.bestbuy.com/site/Insignia%26%23174%3B+-+200W+2.0-Ch.+Stereo+Receiver/8254612.p?id=1169512...
How would I connect my MacBook to the Receiver, to route its sound through the receiver? It seems possible, but I 'm not sure how to do it and what specific cables I need.
Any thoughts? Ideas?
Dan

I think you need one of those Y adapters. One end plugs into the laptop, and the other end , which is red and white plugs into the stereo
*******DISCLAIMER********
I am not an employee of BBY in any shape or form. All information presented in my replies or postings is my own opinion. It is up to you , the end user to determine the ultimate validity of any information presented on these forums.

Digital Connections, SPDIF and Dolby Digital Info

I have noticed that many people have problems using their digital connections, so I put together this info to try and explain the difference between digital and analogue, and how to use them.
Digital ConnectionsDigital connections come in two standard forms, optical and coax. They both give you exactly the same result, the only difference is the medium (material) through which the signal travels. The thing to remember about digital is that for ordinary, uncompressed sound, it will only carry a stereo signal. So, if you like to use CMSS with your music, or you try the speaker test function, optical/coax is useless as you only hear the front left/right speakers.
Movies wth Dolby Digital (AC3) & DTSMovies on DVD often use encoded audio in the form of Dolby Digital (AC3) or DTS. This means that all 6 channels are compressed into a single stream of digital data. A decoder is required to extract the channels and send the sound to the correct speakers. There are three ways to do this.
) Pass the AC3/DTS signal to a external decoder. This is where your optical/coax connection is used. To go down this route, you must first have a set of speakers or a decoder that supports Dolby Digital. In your DVD software, select 'SPDIF' as the audio output method and 'SPDIF Pass-through' in your soundcard options. What this does is tells both the software and soundcard to leave the audio from the DVD in compressed form and send it straight through the digital outputs. Your digital speakers/receiver will do all the decoding to give you full surround sound. Please note that this is the only way to get 6 channels through an optical/coax cable.
2) Decode the AC3/DTS with your Sound Blaster.You should choose this option if you don't have an external decoder. In the DVD software, select 'SPDIF' as the audio output method and make sure that 'SPDIF Pass-through' in the souncard options is off. The DVD software will now pass the compressed audio to your soundcard, which will then decode the data. The soundcard will output the 6 channels using the analogue connections (or digital DIN, more on this later). If you try to use a digital optical/coax connection to your speakers, you will only hear faint sounds from the front left/right speakers.
3) Decode the AC3/DTS with software.If you have a soundcard that doesn't support Dolby Digital (like the SB Li've! 24-bit) and you don't have digital speakers, the only way for you to get surround sound in movies is to use software to decode the AC3/DTS. The free versions of DVD software you get with hardware often don't support this feature, you will most likely need a full version. First select 'Dolby Digital' or 'DTS' decoding in the DVD software audio options (you must select the right sound format for the movie you are watching). Then make sure that 'SPDIF Pass-through' in the soundcard options is off. As with method (2) you must connect your speakers with the 3 analogue cables, not optical/coax.
PC GamesPC games usually use technologies like as EAX to create surround sound, not Dolby Digital. So even if your speaker system has a Dolby Digital decoder, it will be of no use when playing games. The EAX processing is done on the soundcard, and the 6-channel sound is output via the analogue (or digital DIN if available). So you still need analogue connections to your digital speakers for games, if you just use an optical/coax cable you will only get the front left/right sound.(N.B. X-Box games do support Dolby Digital, so if you connect your X-Box to your Dolby Digital receiver/speakers with the optical cable, you can get full surround sound.)
Creative's 4-pole mini-jack & Digital DINYou can only get the full use out of this connection when used between Creative Sound Blasters and compatible Creative speaker systems. It is the digital equivalent of the analogue connections, but instead of using 3 stereo sockets, you use just one digital socket. There are 4 conducting connections in the socket (unlike coax which has two) so there are enough connections to carry 3 different digital stereo signals (front R/L, rear R/L and Sub/Centre). You will probably require a 4-pole mini-jack > DIN converter to connect your Creative speakers to this socket. Using this connection will allow you to get surround from games (unlike SPDIF). However the digital DIN input on some Creative speakers can't receive AC3/DTS data, so you may still require an optical/coax connection.
N.B. This digital socket on the Sound Blaster cards doubles as the digital coax output. If you don't have digital DIN, you can use a mono or stereo mini-jack > RCA converter to connect to the coax input on your speakers, as the front R/L or AC3/DTS signals are sent through the tip of the plug.
More InfoCreative's Speaker Conectivity Guide: http://support.creative.com/kb/ShowA....aspx?sid=5035
Dolby Surround info: http://www.dolby.com
I hope that clarifies the issue .
Message Edited by KokChoy-CL on 07-04-2008 :0 AM

Digital Connections, SPDIF and Dolby Digital (german revision)
Options
03-08-2007 01:52 AM
Digital Connections, SPDIF and Dolby Digital Info
Übersetzung + Erweiterungen + Revision 03-08-07
Der Digitale Anschluß
Ich habe beobachtet, daß viele Leute Fragen zu den Sound-Anschlüssen haben, daher trage ich hier einige Infos zusammen und erkläre die Unterschiede in der Verwendung der digitalen und analogen Anschlüsse.
Digitale Anschlüsse – S-PDIF & Toslink
Am PC gibt es zwei häufig verwendete digitale Anschlußformate optisch (Toslink) und koaxial (S-PDIF).
Im Prinzip erzielen beide Anschlüsse genau das gleiche Audio-Ergebnis.
Der primäre Unterschied ist das Medium ( das Material ) durch das das Signal übertragen wird. ( Glasfaser oder Kupfer )
!! Update !!
Ein wichtiger Aspekt in der Auswahl von digital-optischen Anschlüssen erklärt sich durch das Vermeiden einer sogenannten „Brummschleife“, d.h. eine elektrisch leitende Verbindung zweier Geräte muß vermieden werden.
( mit Lichtwellenleiter - LWL- z.B. mit dem Anschluß-System Toslink )
In der Elektrotechnik ( Niedervolttechnik ) wird oft der „Negative“ Pol der Spannungsversorgung über das elektrisch leitende Gehäuse ( die sogenannte Masse )geführt. Das spart einerseits einen weiteren Kabelweg ( also Kupfer ) ein und ergibt eine mehr oder weniger wirksame (Ab-) Schirmung. Diese Schirmung soll die elektronische Schaltung vor elektromagnetischen, hochfrequenten und niederfrequenten Störeinflüssen je nach Ausführung der Schirmung schützen.
Üblicherweise besitzt jedes elektronische Gerät eine eigene Spannungsversorgung. Netzteile in elektronischen Geräten unterscheiden sich in der Art der Spannungsumformung, in der Höhe der Spannung, in der zur Verfügung gestellten Leistung, durch verschiedene Bauarten und unterschiedliche Bauteil-Tolleranzen entstehen somit verschiedenste Masse-Potentiale.
Werden solche Geräte durch elektrisch leitende Kabel verbunden, kommt es zu einem Ausgleich der verschiedenen Masse-Potentiale. Ein negatives Ergebnis der Verbindung von TV-Geräten oder PC-Komponenten mit Audio-Komponenten ist oft eine hörbare Beeinträchtigung von Audio-Signalen - ein tieffrequentes Brummen.( auch Brummschleife oder Masseschleife genannt )
Hierfür verantwortlich zu machen ist eine elektrisch leitende Verbindung. In der HiFi-Technik ist das in der Regel ein Koaxialkabel und dessen Schirmung.
Vermeidung u. Reduzierung dieser Störgeräusche Ansätze
!! Der einfache Weg !!
Einsatz einer optischen Signal- / Datenübertragung mit Lichtwellenleiter
- Glasfaser als Trägermaterial
( Einsatz einer Datenübertragung ohne elektrisch leitende Verbindungen )
aufwendige Wege
Einsatz einer Galvanischen Trennung - mit einem Ground-Isolator
(Massetrennung )
+ die elektrische Verbindung der Schirmung wird umgangen
- aber Leistungs- & und Klangverlust(geringere Dynamik)
- Verwendung von ( hochwertigen ) symmetrischen Verbindungen
( „PLUS“ „MINUS“ „Masse“)
+ Trennung der Schirmung an einer „Seite“ des Kabels möglich
[bei Koaxialkabel unsinnig weil eine Ader zerstört wird und
anschließend dieses Kabel wertlos ist ]
- sehr große Anschlüsse
- Profibereich
- Einsatz einer zentralen Spannungsversorgung für alle miteinander
verbundenen Geräte
Nachtrag
Bitte nicht verwechseln mit Netzbrummen - die Einstreuung der Netzfrequenz 50 Hz ( EU ) oder 60 Hz ( US ) in den Audio-Signalweg das ist üblicherweise auf eine nicht ausreichende Entstörung oder(Ab-)Schirmung zurückzuführen ist.
- End - !! Update !!
Einige Vorbetrachtungen
Die traditionelle Ton-Übertragung ist ein unkomprimiertes Signal, es wird in Stereo übertragen.
Wenn du CMSS ( Creative Multi Speaker Surround simulierten Surround Sound ) aus deiner Stereo-Musik erzeugen willst oder der Sprach-Test abgerufen wird ( nur über den Center ) ist der digitale Anschluß ( optisch & koaxial ) unbrauchbar, denn es würden nur die Lautsprecher Front-Rechts und Front-Links angesprochen !! Es wird ein anderer Anschluß benötigt, der die Kanäle einzeln ansteuert.
Für das Format 5.1 ist das die Verbindung über die drei 3,5 mm Klinken-Stecker ( 3 mal 2 Kanäle ) mit der folgenden
Kanalzuweisung 5.1
Front R / Front L + Rear R + Rear L + Subwoofer / Center
Mehrkanalton in Filmen - DolbyDigital (AC3 / DD) oder DTS
Filme auf DVD verwenden häufig ein kodiertes Mehrkanal-Audiosignal, in der Form DolbyDigital ( AC3 / DD ) oder DTS. Bei dem gebräuchlichsten Format 5.1 werden 6 Signale ( 3 mal 2 Kanäle ) in einem digitalen Datenstrom zusammengefaßt und komprimiert = das Kodieren.
Nach der Übertragung des Signals muß aus diesem Datenstrom ein Decoder die entsprechenden Töne trennen und jedem Kanal zuordnen = das Dekodieren.
Drei Varianten der Decodierung sind möglich.
(1) - AC3 / DTS Signal wird zu einem externen Decoder geführt
Genau hier wird der optische / koaxiale Anschluß genutzt. Um diese Variante nutzen zu können, mußt du ein digitales Lautsprecher-Set oder einen Digital-Decoder ( z.B: Digital-Receiver ) besitzen, der die Dekodierung des gewünschten Formats ( DD, AC3, DTS) übernimmt. Für jedes Digital-Format benötigt man einen entsprechenden Decoder – das Handbuch weiß hier oft mehr – welches Format von welchem Gerät dekodiert werden kann !!
Wähle in deiner DVD-Software den zur digitalen Datenübertragung gewünschten Anschluß "S-PDIF"( Koaxial ) oder "Optisch" als Audio-Ausgang.
In den Soundkarten-Einstellungen muß die Option "S-PDIF-Durchschleifen" ( "SPDIF Pass-through" ) eingestellt werden.
Dadurch wird das Audio-Signal von der DVD in digitaler ( komprimierter ) Form direkt an die Digital-Ausgänge der Soundkarte weitergeleitet. Anschließend kann ein angeschlossener externer Decoder z.B. im digitalen Lautsprecher-System oder im Digital-Receiver die Decodierung übernehmen und es entsteht ein „Räumliches Klangbild“.
Bitte merken:
Daß ist der einzige Weg 5.1 Signale ( digital ) über ein koaxiales bzw. optisches Kabel zu übertragen.
(2) - AC3 / DTS mit der Soundkarte decodieren
Diese Variante ist zu verwenden, wenn du keinen externen Decoder / Receiver verwenden willst.
In der DVD-Software wird "S-PDIF" als Audio-Ausgang gewählt und es muß zwingend in den Optionen der Soundkarte "S-PDIF-Durchschleifen" ( "SPDIF Pass-through" ) deaktiviert werden.
Die DVD-Software wird jetzt das ( digitale ) komprimierte Audio-Signal an deine Soundkarte senden und dann werden dort die digitalen Daten decodiert. Die Soundkarte gibt dann die 6 Audio-Kanäle ( bei 5.1 ) über ihre drei analogen Anschlüsse aus ( 3 mal 3,5 mm Klinke ) mit folgender
Kanalzuweisung 5.1
Front R / Front L + Rear R + Rear L + Subwoofer / Center
Es wird in diesem Beispiel also ein 5.1-Lautsprecher-System benötigt, mit der analogen Anschluß-Option von drei Klinken-Steckern.
( also 3 x 2 Kanäle = 3 mal 3,5 mm Klinke )
- die Einspeisung eines digitalen Signals über DigitalDIN, ist mit dem optionalen digitalen E/A-Modulbei möglich ***
- wird hier ein optisches / koaxiales Kabel verwendest, hörst du nur schwache Töne der Front-Lautsprecher R + L
*** Bei Karten der SB073X-Serie verfügt diese Buchse nicht über die Digital-In-Funktion !! zur Unterstützung des digitalen E/A-Moduls )
[ mehr unten ]
(3) - AC3 / DTS mit einer Software decodieren
Wenn deine Soundkarte kein DolbyDigital unterstützt
( wie die SB Live! 24-bit ) und auch kein digitales Lautsprecher-System vorhanden ist, kannst du Raumklang
(Surrsound-Sound ) aus DV-Filmen auch über eine AC3 / DTS fähige Software erzeugen.
Gratis-DVD-Software-Versionen unterstützen diese Funktion häufig nicht, du benötigst dann eine Software-Voll-Version.
Wähle die gewünschte digitale Audio-Tonspur „DolbyDigital“ oder „DTS“, im Audio-Menü einer DVD.
Dann stelle sicher, das in den Soundkarten-Optionen "S-PDIF-Durchschleifen"
( "SPDIF Pass-through" ) ausgeschaltet ist.
Wie unter (2) mußt du deine Lautsprecher mit den drei analogen Kabeln anschließen und nicht optisch oder koaxial !! ( 3 mal 3,5 Klinke )
Kanalzuweisung 5.1
Front R / Front L + Rear R + Rear L + Subwoofer / Center
Generell sind bei zuvor genannten Varianten (1) – (3) auch andere mehrkanalige
Wiedergabeformate möglich.
In Abhängigkeit von der Ausstattung der Quelle also von der DVD. der CD. der TV-Karte, dem Game usw. sind andere Formate z.B. 2.0 / 2.1 / 4.0 / 4.1 / 5.1 / 7.1-Kanal Wiedergabe möglich.
PC Spiele
PC Spiele nutzen normalerweise Technologien wie EAX, die ihren eigenen Surround-Sound, ohne Verwendung von DolbyDigital erzeugen. Selbst wenn dein Lautsprecher-System einen DolbyDigital-Decoder besitzt, ist dieser für Games unbrauchbar. Denn die EAX Verarbeitung findet direkt auf der Soundkarte statt und die Ausgabe der 6 Kanäle ( 5.1 ) erfolgt über die analogen Ausgänge
( 3 mal 3,5 mm Klinke ) ( oder über DigitalDIN, wenn vorhanden *** ).
*** Bei Karten der SB073X-Serie verfügt diese Buchse nicht über die Digital-In-Funktion !! zur Unterstützung des digitalen E/A-Moduls ) [ mehr unten ]
Kanalzuweisung 5.1
Front R / Front L + Rear R + Rear L + Subwoofer / Center
Für Mehrkanalwiedergabe in Spielen benötigst du also Lautsprecher-Systeme mit analogen Anschlüssen oder einen Digital-Receiver mit analogem ( 5.1 ) Eingang.
Wenn du ein optisches / koaxiales Kabel verwendest, dann kannst du nur die vorderen Kanäle ( links / rechts ) hören.
!!! Notiz !!!
X-Box Spiele unterstützen DolbyDigital, wenn du deine X-Box mit einem DolbyDigital-Receiver oder einem digitalen Lautsprecher-System über optische Kabel verbindest, kannst du den vollen Surround Sound nutzen.
Die Sound Blaster Karten der SB073X-Serie bieten neben dem digitalen ( koaxial / extern ) Anschluß über den Anschluss Flexi-Jack auch noch einen weiteren Anschluß, direkt auf der Karte ( koaxial / intern )
Flexi-Jack - DigitalDIN
Wenn du kein digitales E/A-Modul ( Digital I/O-Modul ) benutzen kannst, ist es möglich mit einem Klinke-Chinch Adapter ( RCA-Adapter ), ein digitales Lautsprecher-System oder einen Digital-Receiver digital ( koaxial ) über den Flexi-Jack-Ausgang der Soundkarte zu verbinden. Alle MiniDin bzw. 3,5 mm Klinken-Stecker können in der Mono- oder auch in der Stereo-Ausführung verwendet werden, denn der mittlere / vordere Pin des 3,5 mm Klinken-Steckers überträgt das AC3 / DTS Signal. Dazu benötigt man eine der folgenden Verbindungen
3,5 mm Klinke ( Mini DIN ) auf Chinch - Adapter ( RCA-Adapter )
für den S-PDIF-Anschluß( koaxial ) an Lautsprecher-Systeme mit digitalem Eingang bzw. Digital-Receiver kann man folgende Varianten verwenden
- Klinke-Mono - Chinch-Stecker ( Stecker –Stecker ) ( Favorit !! )
- Klinke-Mono auf Chinch-Mono ( Stecker - Kupplung ) + Chinch-Verbindungkabel
( Stecker - Stecker )
- Klinke-Stereo auf Chinch-Mono ( Stecker - Kupplung ) + Chinch-Verbindungkabel
( Stecker - Stecker )
Das digitale E/A-Modul ( Digital I/O – Modul )
Die Verwendung von optionalem Zubehör Digitales E/A-Modul ( Digital I/O-Modul ) bietet die Möglichkeit der direkten Verwendung eines S-PDIF Verbindungskabels und stellt zusätzlich zum koaxialen Anschluß einen optischen Anschluß ( Toslink ) bereit. Die optische Verbindung kann wie oben beschrieben zur Vermeidung einer Brummschleife hilfreich sein.
Des weiteren wird ( abhängig von der Ausstattung der Soundkarte *** ) ein digitaler Eingang über das E/A-Modul bereitgestellt, der Eingang ist ebenso wie der Ausgang in optischer ( Toslink ) und koaxialer ( S-PDIF ) Bauform ausgeführt.
Achtung !!
( *** Bei Karten der SB073X-Serie verfügt diese Buchse nicht über die Digital-In-Funktion !! zur Unterstützung des digitalen E/A-Moduls )
interner S-PDIF E/A-Anschluss ( für Geräte der SB073X-Serie )
zum Anschluß einer Decoderkarte oder externer Decoder bzw. Lautsprechersysteme mit digitalem Eingang ist ein entsprechender Adapter erforderlich
Bei einigen Modellen ist eine Dekoderkarte im Lieferumfang enthalten bzw. in einigen Regionen als Zubehör erhältlich
Front Panel-Sockel (für Geräte der SB073X-Serie)
2 x 5-poliger Front Panel-Sockel nur für Verbindungen mit einem Intel HD Front Panel Audio-Standardsockel (nur Geräte der SB073X-Serie) Intel Front Panel Audio-Kabels (separat erhältlich)
Anschlusskompatibilität
Ausschließlich Intel HD Front Panel Audio-Standard
Nicht kompatibel mit AC97 oder Intel-kompatiblem HD Front Panel Audio
Einschränkungen
Wenn neben den hinteren Mikrofonen auch Frontmikrofone angeschlossen sind, werden die hinteren Mikrofone automatisch deaktiviert.
Sound Blaster X-Fi E/A-Konsole
Auf der Rückseite Ihrer X-Fi-E/A-Konsole* befindet sich eine sogenannte DIN-Buchse. Um die Funktionen für eine integrierte Lautsprechersteuerung zu nutzen, können Sie an diese Buchse ausgewählte analoge Creative-Lautsprechersysteme anschließen, die über eine Kabelfernbedienung oder eine Audiokonsole verfügen.
So können Sie beispielsweise über den Master-Lautstärkeregler Ihrer X-Fi-E/A-Konsole die Lautstärke der Lautsprecher regeln oder die Lautsprecher stummschalten.
-eof-

160GB iPod Classic Won't Work Properly with speaker systems

My 120GB works fine with my iHome, and a new speaker system I just purchased... because I thought my iHome was broken, because when I used my 160GB in it, it didn't respond to "play/pause" commands with either the remote or the speaker command. When I tried the 160GB on the new system I bought, it didn't respond either. Should the 160GB work fine with those systems if they play the 120GB without a problem? I'm a bit confused on the issue.

More info would be helpful
What do you see on the iPod screen when you connect to the PC?
Which version of iTunes are you using?
What is the iPod software version as shown in iTunes summary page, the last time you connect successfully.? Or just, on the iPod, press Settings->About
press the select button 3 times and you will get the software version.
HAVE A NICE DAY!

I Trigue 5600 Speaker System RMA

Hi, would be grateful for some help please. A couple of days ago my speaker system stopped working. It is within warranty and I contacted the support centre. I was sent a troubleshooting guide which I followed through and still the speaker system isn't working.What I did discover however, is that the power supply unit that plugs directly into the subwoofer is actually working as I could hear it buzzing when I put it next to my ear. Also, it does get a bit warm when it's on.Anyway, I tried to explain that to customer support, and they have sent me an RMA no for the power supply !Phoned up this morning and I'm not getting anywhere. The problem could be either with the subwoofer, or the volume control unit, or failing that the power supply unit. The volume control produces a blue light normally when its turned on, but that isn't also happening anymore. I am from the UK btw and if anyone could help, I would be very grateful. I have also sent numerous emails trying to explain the above. Thanks

Well i think i have the same problem as you with these exact speakers (i-trigue 5600). I found out it was the volume control not that long ago, so im guessing this is the same problem as you! Try lifting the black turner thing on the volume control away from it and turn it and see if the blue light comes on, mine came on for a second, but the volume control is definitely faulty. If you know of any way to get a volume control this would also help me :-) Peace outChris

I own a Zen Vison: M and am wanting a speaker system for my player

I know there aren't any docking speaker systems for them yet, and I honestly doubt there will be any real soon.
So what would be the best way to go?
My X girlfriend had an I-Pod (poooo) and she had this speaker system.
http://www.alteclansing.com/product_details.asp?pID=IM7
Honestly that thing would be the only reason I would go gay for I-Pod.
What would I have to do to get something close to that?
A dock: http://us.creative.com/products/prod...7&product=4485
Speaker System: http://us.creative.com/products/prod...7&product=4097
Wireless remote?:http://us.creative.com/products/prod...Specifications
The wireless remote confuses me becuase I swear the other night it said it suppotered the Vision: M and now it just says the Vision.
I've also found this, The Player Dock http://us.creative.com/products/prod...5&nav=features
But would it be compatible with the wireless remote?
It's so hard being a creative customer, There aren't any worth while accessories yet.
Anyway, if anyone could help me that would be great.

Hi There,?I just bought my Zen Vision M yesterday and so far I'm very happy with it. I had a Toshiba Gigabeat S30 first but the battery was horrid (seems to be very close to the Zune in design and features etc)?then I swapped for an 80GB Ipod video but there is a massi've problem with the EQ settings wanting to clip passed the digital headroom (google "ipod distortion")?Got The Creative Zen Vision M and I can say the following so far:?The sound output is strong and powers my $200 Sony in ear headphones with clean power even with bass all the way up. It's got a custom 5 band graphic EQ which works well to customise the sound to how you want it (I hate the standard MP3 EQ options of most players)?The sound quality is Very Very Good. (I'm a Hi-Fi freak and a competent home recording engineer)?I can see the screen easily even on a hot bright sunny day outdoors on 50% brightness (Very useful)?I have a couple of MP3's that were converted from WMA's and on some players they dont play but the Creative plays them fine. The use interface is easy to navigate but not quite as good as the Toshiba Gigabeat but looks nicer. The FM radio is great sounding aswell which is a bonus and you can custom name the stations. You can set photos as wallpaper and it comes with 6 player skins to customise the look. Battery seems pretty good. when its not locked the screen goes dimmer instead of turning off completely but the battery still seems to last ok. (if you lock it though it will last even longer.)?I haven't found anything bad about it yet. Toshiba Gigabeat S30? 5/0Apple Ipod Video 80GB? 2/0Creative Zen Vision M?? 0/0 so far?hope this helped.

XFI extreme music and digidal din conection to 4 point surround speak

Here is my problem i mostly use my pc for games
i connected my digidal din to my speaker system and when i go to the THX optimizer i only can get sound out of the fron left and front right speakers. I used to have a sound blaster li've value card like 8 years ago and i could get sound out of all four of my speakers. I have the old creative four point surround speakers that have a digidal din conection. How can i recieve sound from all four channels

duykhanh204 wrote:
thanks for reply ! Pls check for me my product is original or OEM , i think its' original? . And check info about? card for me , it's support full or lost some component ?SB0460- S/N : [size="3" color="#ff0000" face="Verdana">MASB0467548002594R [size="3" color="#ff0000" face="Verdana">Made in malay?I Download the lastest driver , but i can't see icon Dolby And DTS . I try open Creative Audio Console,in tab SpDIF I/O , everything is invisibile, can't choose . And see in the combo box is "default" . What happens ? Some my friends use XFI Fatalty Xtreme gamer and XFI xtreme Music same my problem .
You have a SB0467 which is a Dell oem X-Fi card. I do not believe it's "origional" or retail. I got mine on ebay brand new for $45. I knew what I was buying (my system is a Dell). The clue to not being retail is that there usually is no retail box, manual, software, etc. I got the card only. So in a nutshell: no support

HT2844 iMac 27"(late 2009), Audio in/Optical digital audio out port, stopped recognizing my new Bose speaker system, previously working...

Hello,
My iMac 27"(late 2009), Audio in/Optical digital audio out port, stopped recognizing my new Bose speaker system, previously working through that port. I tested the speaker system through my iPhone, and it works fine. I hooked it up to the Headphone out/Optical digital audio in port, and it works through that port also. I did a computer restart, I also checked all wiring and did a system repair on the computer. I also restarted the computer in mode where I could use the system utility, and the computer still did not correct the matter, and it reported everything as being "ok". I wented into "sound", through system preferences, and the computer does not recognize anything I plug into the Audio in/Optical digital audio out port. When I plug the speaker sysytem into the headphone out/optical digital audio out port, it does recognize the Bose speaker system as being "headphones".
Reading through a lot of forums, I hear everything from compatibility, to the port being stuck, and on and on. Since the port was working before, and just quit working one day, I wonder if there is a capacitor or fuse or some type of similar thing is blown, and causing the port to be unfunctionable. Maybe the port went bad, but before this time, I had never used it, and the computer does not move around, and I never plug in and pull wiring out unless needing to, and that being rare.
Here is a link to Costco, where I bought the system, and the exact system I have, if this is any help: http://accessories.us.dell.com/sna/productdetail.aspx?c=us&l=en&s=bsd&cs=04&sku= A4092931&ST=pla&dgc=ST&cid=262075&lid=4742361&acd=1230980794501410
By the way, I am running OS X Mountain Lion (10.8.5). I upgraded to Mavericks about a month ago, and expeirienced a number of issues, and had to take my iMac into Apple. Talking with the tech, I decided to wait for a while more before I upgraded to Mavericks. I try and keep the computer maintained.
If any of you have any ideas regadrding wear and tear, and fix I can do, etc., besides having to take my computer into Apple? Thank you, and potentially all of you, for your time and effort in helping me with this issue. Thank you kindly.
davE

Okay, davE, first, you have posted in the "Mac Pro" forum (not Macbook Pro), so we can't be super helpful
but we help you. First, hold down the Option key while clicking on the speaker icon at the top of your screen. This should show you all the inputs and outputs you have. you could check in "About this Mac" then "More info" to see whatever's recognized. Then, maybe, fire up Audio MIDI. your speaker system should show up there. something might have gotten set incorrectly. You can test it there. I guess you are using the good ol' analog cable for connection, and it works on your iPhone, so the cable isn't bad. You could try this. it 's an adapter which might solve your problem
http://www.amazon.com/gp/product/B004HBWYQ6/ref=oh_details_o00_s00_i00
depending on which model of Bose speaker you have, you might try doing a product reset
turn off speakers...unplug power cord from outlet...wait 1 minute..plug cord into outlet..turn on speakers..
\\turning off automatic standby||
press and hold top of control pod for 6 seconds until you hear 2 tones that go from high to low
other than that ,I don't know
John B

Digital I/O Module and 5.1 digital speak

Hello all,
First of all, excuse me for my English. I will try to explain my problem the best I can.
I have a Sound Blaster Audigy installed on my PC. I wanted to use it with a 5. digital speakers system (with digital optical input). On the soundcard instructions I read about the "Digital I/O Module", that allows you to connect 5. digital speakers. Then, I bought it (on creative online shop), and I have received it today. But, when I have connected it to the speaker system, the output sound is only 2.0. I have selected 5. on speaker configuration, but in the test, it only sounds the front left and right speakers. I have tried with a DVD movie, and the sound is only 2.0, also. Is there any way to play 5. sound on DVD movies (and AC3 sound system, if possible) with my configuration?
In other forum posts, I have read something about this problem, but I can not find any solution for it, or if it is possible to solve it.
Thanks in advance.
javilp

Hello all,
First of all, excuse me for my English. I will try to explain my problem the best I can.
I have a Sound Blaster Audigy installed on my PC. I wanted to use it with a 5. digital speakers system (with digital optical input). On the soundcard instructions I read about the "Digital I/O Module", that allows you to connect 5. digital speakers. Then, I bought it (on creative online shop), and I have received it today. But, when I have connected it to the speaker system, the output sound is only 2.0. I have selected 5. on speaker configuration, but in the test, it only sounds the front left and right speakers. I have tried with a DVD movie, and the sound is only 2.0, also. Is there any way to play 5. sound on DVD movies (and AC3 sound system, if possible) with my configuration?
In other forum posts, I have read something about this problem, but I can not find any solution for it, or if it is possible to solve it.
Thanks in advance.
javilp

How can I get permission to use Apple's Airplay Technology for new and innovative Speaker System?

Hi there!
I want to integrate Airplay technology in a new and innovative Speaker System.
I've searched the internet, but couldn't find anything.
Does anybody know how to get the permission to use it?

Apple
1 Infinite Loop
Cupertino, CA 95014
408.996.1010
...ask to speak to someone about licen$ing.

My iPod Nano 6th generation iLive speaker system quit on me and now I cannot find a compatible speaker system. I don't want tiny personal speakers, I use this for music in the family room.

I have 2 iPod Nano 6th generation. I had them setup with different music from iTunes and I had an iLive Bluetooth docking and speaker system that charged and played them with speakers spaced in the family room. Not a little personal setup but for reasonably loud music for the whole room. My iLive system died on me. It had the 20 pin place to plug in the iPod nano and a clock and the two speakers that were bluetooth. It was the perfect setup for me. Now that model has been discontinued and I cannot find anything like it. Does anyone know what a good option is? These iPods are only a couple of years old and now obsolete because they don't make anything to play them on. I don't use earbuds, it's not what I bought them for. One has our jazz music collection, the other has Christmas music. I want to hear it throughout the house.

Sorry typo it had a 30 pin place to plug in the iPod Nano

Hi, I need a video editing software for my Power Mac G5 system. Hunted all over for one! Can anyone help me and point me in the right direction. Everything I come across is for intel based systems. Many thanks in advance.

Hi, I need a video editing software for my Power Mac G5 system. Hunted all over for one! Can anyone help me and point me in the right direction. Everything I come across is for intel based systems. Many thanks in advance.

I have Final Cut Studio V1 - the PPC/Intel V5/5.1 cross-grade version, which would suit your requirements perfectly. (I have it for sale at present down here).
If you keep looking, you're sure to find a similar second hand copy in your area, without the need to upgrade your graphics card.
I'd go for Final Cut Pro as above over any version of Express. FCP has the full version of LiveType - not the truncated version that was released later on.

My new iPhone 4 will not play on the iHome iP1 Speaker System. I have removed the case and seated it properly and it charges, but does not play music. How can I get it to work?

My new iPhone 4 will not play on the iHome iP1 Speaker System. I have removed the case and seated it properly and it charges, but does not play music. How can I get it to work?

Hi there Graham!
I have a couple of articles that can help you troubleshoot this issue. First, if you are downloading HD content, you will need to know the system requirements for HD playback, which can be found here:
iTunes: Purchasing and viewing HD videos
http://support.apple.com/kb/ht3209
Next, you will want to check your video playback settings on your Windows machine. The steps for that can be found right here:
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718
Hope that helps. Thanks for using the Apple Support Communities!
Cheers,
Braden

I just got a new iMac. And I wondered if I can. Use my yamaha speaker system with subwoofer?

I just got a new Iimac and I wondered if I can use my speaker system from my last pc, the speakers are yamahas with a powered subwoofer ?

If your presumably "amplified" Yamaha speakers have a USB connection, then it should work fine with your iMac by connecting the USB connection and THEN going into your Mac's Applications folder>System Preferences>Sound>select the "Output" tab and select the Yamaha speakers shown in the list below. That should do it.
Hope this helps

X-FI and 4 point Digital Speaker system

Similar Messages

Maybe you are looking for