X FI elite pro and gigaworks s750 no sound from speakers but sound from headphones please h
hi
i own an x fi elite pro and a gigaworks s750
thing is i recently had to format my computer, before which i was getting surround sound through my speakers and headphones normally.
however i can now only get sound through my headphones.
I have the latest drivers installed and i am bald due to pulling all my hair out
if you can help please do
appreciated
Fonz
realwiz,
There's a setting in the mixer software where it instruct the soundcard to mute the speaker when headphone is connected to the I/O dri've bay. Perhaps you can check if that setting has been enabled.
Jason
Similar Messages
-
TV/ SKY Digital Sound Through MY X-FI Elite Pro and Gigaworks s
Hi i am trying to find out if i can get sound from my tv/sky digibox to pass through my gigaworks s750's.
I have just got hold of a new Sony Widescreen TV and a sky digibox both seem to to have audio out right and left on the back of them. On the computer side of things i have a X-FI Elite Pro and the Gigaworks S750's.
Im not sure about all of this so was hoping somebody in here could help.
Any Help on what i need to do or buy would be great
ThanksMessage Edited by Effigee on 2-5-2005 0:25 PM<SPAN>Hey man, thanks for pointing me in the right direction! I started messing around with the Phono 2 dials on the unit and was having no luck what so ever. I then wanted to try my microphone to make sure that it was still working from all the changes I had made. Well, when I hit the record button and talked into my mic it showed something being recorded, so I knew my mic was still working... But.... when I played the recording, It was the recording from the T.V.!!! At this point I knew I was close to getting this issue solved.
<SPAN>
<SPAN><SPAN>I ended up having to open my "Sounds & Audio" controller within the Windows XP Control Panel and then going to the volume section of the XF-I card and then going to file, properties, and then check the "Phono 2" port off so that I could see it listed with all of my other volume and sounds controls. I then un-muted it as you said and Bam!!!!!!! Guitar Hero on my PS2 was pumping out at my full 500W!!!! I nearly went death from the experience, but it was very gratifying!!!
<SPAN>
<SPAN><SPAN>Thanks for your post. It really helped to point me in the right direction. I'm now thinking of digitizing all my vinal records now into MP3's too! Thanks again man, you?re the bomb!
<SPAN>
<SPAN>Jeep -
Elite Pro and vista, creative console resets after ever reb
So, I've given up trying to search for the answer and I have no clue how to go about fixing this problem.
If I boot into visata 32 Ultimate, and go and setup my audio console the way I like it then reboot, it will reset itself to defaults when I boot back into windows.
basically its not saving my configuration. Why does this happen and how can I fix this? It doesn't sound the same as the Digital output resetting itself. I have the latest drivers installed on a clean slate...why does this still happen?
its friggen annoying!yep , i see they are supported, the same is mentioned on the drivers download page,
it states that DTS has been re enabled on devices that supported it on XP when they were originally released.
so i have the elite pro, wich supported dd and dts, and still i get no sound form any dvd in dts or even sound from my PS3 input via optical to the external I/0 of the elite pro.
and i have been told that i would need to buy the dts pack.
why ? when i already paid ?250 for the card that supported it from the moment i bought it ?
dts input support was one of the reasons i bought this card in the first place.
i might as well sell this and use my onboard optical output and buy an amplifier that supports dts, at least then ill know that there are no drivers/support problems
?creative you might make the best sound cards out there but that alone only gets you half way there. us customers we need support and value for our money?
not u trying to rip us off
Message Edited by dkbimo on 07-0-2009 03:57 PMMessage Edited by dkbimo on 08-4-2009 05:9 PM -
5.1 sound X-Fi elite pro and DTT3
Hi all?Ok, so I have an X-Fi Elite Pro, and the DTT3500 speaker setup from Creative. Both very expensi've where I li've. I could get 5. sound from my SB Li've! 5. digital, but no such luck on the X-FI. I've read all the posts, but when speaking to Creative tech support they tell a different story. I know I can get 5. (supposedly) from DVD etc. via co-ax or optical. How do I get 5. from other apps (such as VideoStudio) or games (BF242, etc.) that do not output DD or DTS?I've tried flexi jack to DIN (from card rear panel to the speaker amp), DIN to DIN (from break-out box to speaker amp) and 3 x 3.5mm stereo to DIN (from card rear panel to speaker amp) Nothing works. I get headphone sound obviously, and can get plain stereo sound (although I didn't get this setting right for optical; works with co-ax though)?(excerpt from tech support mail)
To assist you, i would suggest to connect the DDT3500 to the soundcard using the 3.5mm jack and the DIN Cable provided directly to the soundcard through the Digial In and DIN Socket.. enable the "Bit-Steam off" in the Audio Console, 2. select " Digital DIN" on the DTT3500 FacePlateIn case if you need any clarification, please do not hesitate to contactus.(/end excerpt)?I have made up a cable with 3 x 3.5 mm stereo jacks > DIN and got no sound at all from this. Tried all my solutions with digital I/O both on and off.?This is all very limiting, as apart from games that I'd like to enjoy as they're meant to be played, I also do video editing and need to proof my surround mixes. Not very happy Creative. Even the tech guy where I bought the card assured me it would work with 5....I have never installed the updated applications available in the download page... just applications and driver for Vista 64bit inside the cd and i updated the driver with the latest one. Anyway, I: Reformatted and installed Vista.
Installed Chipset Drivers.
Installed Video Drivers.
Downloaded and installed JUST the latest SB drivers and i have that **bleep**-ing error window...Guys, it's 2 years i try to install Vista...Have i to destroy this sound card If i have to change it, i'll never buy another creative product in all my life (and till today i have bought 3 sound cards, 2 webcam, 4., 5. and 2. speakers for every computer we have in the office...). Thanks p.s.What is the DMLL.exe service, please
If i enter in the "Task Bar" is visible... if i close it and i restart the computer i find it... How can i delete it forever -
X-Fi Elite PRO and Vista: dropouts and no sound. Only Changing mode in Audio-Console helps
Hi... Please help me. I have an X-Fi Elite Pro and I am experiencing a very strange problem in Vista 32. Before using Vista, I had no problems at all in XP. Sometimes when I listen to the music (Winamp) and then after listening the music start watching movie, the sound dissappears. I mean the EQ of Winamp freezes and there is no sound at all
!!! Only if I switch audio-console (in Configuration menu) to Games mode (or an other one) and back, the sound comes back... Sometimes it happens, sometimes not. It is very strange. Please, do you know a solution for that?!In no way a 300W Power Supply has enough power for all your stuff.
2 HDD's, a power-hungry Pentium, a xfi card, dvd burner and many other stuff ...
Problems like this can happen then if your power supply has not enough power to handle all this stuff.
Get a better powersupply that can handle your stuff and I am sure it will work again. In a few cases its also possible that YOU damage your hardware on this way, if it can not get enough stable power, it might mess up your hardware. I also already blowed up a harddisk one day because I have connected too much stuff to one cable. I had 3 HDD's, Mainboard, Lights, Fans and DVD connected to one single cable. All devices there did not get enough power, harddisks made crazy sounds (on/off/on/off very fast) and after that one of my HDDs was bad.
But no ... you can't blame anyone for this. In 99% a bad power supply should not damagae your hardware, it will just make sure it does not work anymore. Since you installed that hardware, YOU are responsible for this. If a hardware-dealer would have to install this card for you, it would be his fault, but now its yours.
BTW: Why do you expect that a 300W suppy is enough!? I mean really ... think about it! See what todays PS can do, take a look how much your pentium already needs ... There are at least 00W gone for your CPU, another 00 for your Videocard and just 00 left for ALLLL the other devices like your harddisks (20-30W each one), DVD, mainboard, soundcard ... In no way this will be enough. You must have missed the last 5 years ...
BTW: I don't think that the software audio console would not work when not having connected the y-power cable. I forget that cable too one time. My console did still work, just in games I got some strange problems a lot of times (no more sound for -2 minutes, crackling and other poroblems) which got solved after I plugged in the power-cable to soundcard.Message Edited by Homey-GER on 0-7-200705:42 AM -
Help with Optical Audio, w/X-Fi Elite Pro, and Logitech Z-5
Hi,
I need help with optical audio on my X-Fi Elite Pro, and Logitech Z-5500 speakers. I have everything connected, and sound comes out, but NO 5. Surround. This is pissing me off beyond belief. I have it all connected, and set to 5. Surround, and on my Logitech's I have it set to opical in, and have tried ALL effects, stereo, strereo 2x,[Dolby Sign] PL II Movie, [Dolby Sign] PL II Music. I have tried the sound card set for an external decoder, and the sound cards' decoder, and tried both with all optical settings on the sound card. It doesn't give me surround with optical... And I would REALLY appreciate help.
My drivers are up to date.
Thanks for the help!!!!!!!!!!!
Yan N. B.Except if you send DD/DTS multichannel sound to your receiver, you'll not have surround sound with digital connection. did you read the stikies?
-
I just got a MacBook Pro and I used Home Sharing to transfer my library from my PC. However, my PC's battery died in the middle of the process so only half of my music was transferred. The sharing option no longer shows up on the left. Do I need to start completely over and delete the content in my new library to prevent duplicates or is there a way to continue the process?
I just got a MacBook Pro and I used Home Sharing to transfer my library from my PC. However, my PC's battery died in the middle of the process so only half of my music was transferred. The sharing option no longer shows up on the left. Do I need to start completely over and delete the content in my new library to prevent duplicates or is there a way to continue the process?
-
just bought macbook pro and want to download purchases I have already made from itunes apps but when it says downloaded can't find it. I have run a search and found it in my mac but unable to open or do anything?? Do not understand what is happening.
robynmm wrote:
so how do I get the same apps for my macbook pro? or is that not possible?
Not sure if that same Application is designed for Mac Os x, Search for Applications on App Store instead of iTunes on your Macbook Pro, as Applications available on iTunes Store on a Macbook is designed to work only on iOS Device like iPhone, iPad and iPod Touch and whatever is available on App Store on Mac is designed for Mac Os x. -
I plugged in my ipod touch 4g to sync with my macbook pro and itunes sent an error saying itunes cannot read your ipod please reset your ipod, so as suggested by itunes i reset my ipod and now when i plug my ipod in itunes doesn't even recognise it and doesnt sync with it
Hello frankini
Continue your troubleshooting with the article below to resolve issues with your iPod touch not being seen in iTunes. It will walk you through checking the drivers as well as any security software that may be blocking it.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
-Norm G. -
I purchased quick time pro, and attempted to download quick time 7, but it says I have quick time x installed. I deleted quick time x but it still says it is there and will not let me install.
In the optional install items-Quick Time is not an option. I am on Leopard.
Then you either:
1) never had QT X installed and could not have deleted it since QT X is only installed on Snow Leopard (OS X v10.6), Lion (OS X v10.7), and Mountain Lion (OS X v10.8) systems or...
2) you are actually running Snow Leopard (OS X v10.6) and not Leopard (OS X v10.5) as you just stated.
Please confirm which statment is actually correct. -
In a MacBook Pro if have vmware Fusion exist any web resource for the benefits and negatives of having Fusion vm win 10 pro and on the other having Fusion vm but connected to bootcamp(both worlds)?
note: I am beginner in Bootcamp - never used.In a MacBook Pro if have vmware Fusion exist any web resource for the benefits and negatives of having Fusion vm win 10 pro and on the other having Fusion vm but connected to bootcamp(both worlds)?
note: I am beginner in Bootcamp - never used. -
I have a Mac Book Pro and am trying to export my project, but cannot as the SHARE options are all faded out. All I am doing is adding text to a movie. It plays back fine in motion.
Hey Adam. Try this link and see if any of the suggestions help: https://discussions.apple.com/thread/5216906?tstart=30
-
I have a MacBook Pro and I created a movie using imovie but once I put the DVD back into my computer it said it was blank! Why?
Please HELP!!!!AFAIK, you can't author a DVD using iMovie - again, AFAIK, you need authoring software such as iDVD or Toast Titanium or something similar.
Clinton -
i bought a mac book pro and apple promised upgradation to lion aosx but yet nothing rcvd , want to ask how much time it takes for them to send me the code to download it (now its more than a week i purchased this mac)
http://www.apple.com/macosx/uptodate/
-
it's been a while that Im unable to copy music from itunes to my iphone. I updated my device to the latest version of IOS 5.1.1 and made sure no jailbreak is installed but still not working. please assist.
Assuming you are not manually managing your music, verify the following:
You are using the latest version of iTunes
On the summary tab of your iTunes sync settings you have checked "Sync only checked songs and videos"
In your music library you have checked all the songs you want to sync to your phone
There are no exclamation points next to any of the songs you want to sync to your phone
You have authorized your computer for all Apple IDs for purchased music you want to sync to your phone (in Store>Authorize this computer)
You have checked "Sync Music" on the Music tab of your iTunes sync settings
When everything looks correct, sync your phone.
Maybe you are looking for
-
Basics - 2008 iMac, 2.8 Ghz, 4 Gig RAM, 500 Gig HDD with over 100 Gig free. DId Disk Utility verification and files-disk are fine. Programs will run, but any filing just stops everything (spinning beach ball). I've managed to back up some major conte
-
Hi, I got a requirement; user should not have authorization to change the automatically populated Payment Terms from Vendor Master. This particular field, Payment Terms should be only in display mode at time posting FI vendor invoice through FB60 or
-
APPLE: We Need An Upgrade Price for Logic Pro X!!!
There has always been an Upgrade path for Logic Pro. Where is it???
-
HT201328 how to unlock iphone without a computer?
how can i unlock my iphone 5s without a computer?
-
Daughter can't download on her "computer"
Using Mac OS 10.3.9 on an iMac, all four family members are set up with admin privileges. But one daughter can't download a pdf or file. She keeps getting the error message "Cannot create file". All of the other users can download. It's only on user