X:panelTabbedPane + Save button troubles

I make changes into one of tabs. After this I click on Save button and get error message saying that fields on other tabs are empty. To avoid this error, I have to switch to ALL the tabs, making them active and initializing their fields and only then make SAVE. How to fix such behavior?

Using the Fieldcatalog edit option you can do that.
x_fieldcat-edit = 'X'.
This too will activate the Save button.

Similar Messages

No save button for workset

Hi,
When moving items up or down in the navigation of a workset, the save button remains greyed. However, if you make a change and close and reopen the workset the changes are there. This can be bad if you make an inadvertent change without knowing. Is there a way to configure it to where you have to hit the save button in order for changes to take affect?
Any help is greatly appreciated.
Best Regards,
Rick

And how nice it would've been if the separate login requirement where presented to you BEFORE you did the trouble of syncing a whole song!
I haven't connected my FB or Google+ account with Spotify, but those are the only login options if you wish to support the lyrics creation. So I just spent a good ten minutes adjusting the lyrics for one song, but no Musixmatch/Spotify - you're not getting it! My privacy is worth sooooo much more than helping out with lyrics editing. (What's wrong with using my existing Spotify account, huh?)

No save button for lyric sync editing

I love the ability to edit lyrics through the lyric sync option, however, there is no save button. I edit the lyrics and when the song changes, it says I'll lose all my work if I switch songs while syncing. Help?

And how nice it would've been if the separate login requirement where presented to you BEFORE you did the trouble of syncing a whole song!
I haven't connected my FB or Google+ account with Spotify, but those are the only login options if you wish to support the lyrics creation. So I just spent a good ten minutes adjusting the lyrics for one song, but no Musixmatch/Spotify - you're not getting it! My privacy is worth sooooo much more than helping out with lyrics editing. (What's wrong with using my existing Spotify account, huh?)

Set default filename for file save dialog on Save button click

Hi,
I am using AxAcroPDF (version 9.0) control to view pdf files in windows forms (C#). The pdf loads into the viewer in the form. Now, when I click on the Save button in the viewer, a Save dialog pops up with a default filename having complete path info.
If I have loaded the pdf file into AxAcroPDF viewer with filename:
"C:\Documents and Settings\KB_Kravi\My Documents\CustomerList.pdf"
then in the save dialog, the default filename will be:
"C_Documents_and_Settings_KB_Kravi_My Documents_CustomerList.pdf"
Is there any option to set the default filename in the save dialog to some short name, instead of this lengthy name?
Thanks,
Ravi.

Hi,
I've found a solution.
public void Open(string filePath)
axAcroPDF.LoadFile(filePath);
//this will set the correct name in the save file dialog.
axAcroPDF.src = filePath;
Thanks for your help.
Freedon

How to handle custom component data on overviewset save button CRM UI

Hi,
I have added a custom component to a standard view which is enchanted.
I can handle any data with my buttons on the component but after editing data
i need the save the data when the save button on the overview(top) is pressed.
I have redefined save button of overview but i cant get my data.
My node name is Root. I think i couldnt bind it to overview.
How can i do that?
Thank you

Probably it can be done by
http://wiki.sdn.sap.com/wiki/display/CRM/CRMWebUITechnical-CreatingTableViewInWebUI
i am trying
Thank you

Rename Save button NewForm.aspx in Sharepoint Foundation 2013

HI,
Recently i try the link below to rename the save button to submit button.
http://yummyto.com/2014/08/15/using-javascript-rename-save-button-newform-aspx-in-sharepoint-2013/#comment-41
I create a Javascript and upload the into style library site portal. After that add in a new content editor web part with (/sites/ESH/Style%20Library/submit.js). When i stop editing and go back to the new form, the button still remain as save without changing
to submit and on top of the form appear the /sites/ESH/Style%20Library/submit.js.
Any wrong on the editing part.
Appreciate that someone can help on this.
Leong

Hi,
I'm using the code below :-
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
<script type=”text/javascript”>
function ChangeSaveButtonText()
var inputcontrols = document.getElementsByTagName(“input”);
for(i = 0; i<inputcontrols .length; i++)
if(inputcontrols [i].type == “button” && inputcontrols [i].value == “Save”)
inputcontrols [i].value = “Submit”;
_spBodyOnLoadFunctionNames.push(“ChangeSaveButtonText”);
</script>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Thanks
Leong

Save button on QBE report not working

Hi,
I included a save button in my QBE cutomization form. it saves everything except for the values I enter for my actual field parameters. The save button works in all other reports (SQL Query, Qurey Wizard based)
is that a bug or am I doing soemthing wrong? Please help with this one.
Thanks, Maike!!

Hi,
thanks for your reply - but I wasn't trying to save the record but really the search customization parameters e. g. like a date value to search for records for that certain date.
And that does not seem to be saved - only the columns I want to display or by what field I want to order.
Please let me know if that should work this way. Thanks, Maike.

Report is Blank after Click on Save button

Hi All,
I am having a Real Time Infocube, which is been used by Monthly and Yearly report separately using different Aggregation Levels.
During Monthly report testing, I made changes in Yearly Report (common for monthly as well) and clicked on SAVE button.
As a result, a new request generated into the Cube, whereas my old request (yellow one) was still there and was containing only 700 records.
Step1:
Now, after that when I activated aggregation level. The output of the report was blank.
Same thing happened with monthly report also.
Step2:
So, I deleted that new request from Cube after changing its behaviour from Planned mode --> Load mode.
Now, when I tried to get it back. It was asking me to green the existing request (old request).
Step3:
when the cube was containing only old yellow request (before changing the behaviour) monthly report was showing me correct data. But, Yearly report was blank.
So, I manually green the request and changed the behaviour to Planned mode.
Whereas, Now (after changing behavior to Planned mode) both reports are blank.
Please help!!
Best Regards,
Jatin

Hi,
first you the correct settings in transaction RSDIPROP for your InfoCube:
On tab 'Roll Up' you should set the flag Set Quality Status to OK Automatically.
Second delete the cache for the planbuffer query; the name of the plan buffer queries are as follows
- if your aggregation level is defined on InfoCube CUBE the name is CUBE/!!1CUBE
- if your aggregation level is defined on MultiProvider IPROV the name is IPROV/!!1IPROV
- if you are using a query on a MultiProvider containing aggregatiion levels delete also the cache of the query.
Now check the values of your query again.
Note 1136163 contains the recommended cache settings in RSRT.
Regards,
Gregor

How do I create a save button to hide a dropdown and pass on the dropdown data to a label?

Hi InDesign Scripting Experts!
I'm desparetly looking for some help to get this issue resolved.
Essentially I've a lot of PDF forms that've been designed by using InDesign CS4 and then converted to an interactive PDF via Adobe Lifecycle. The final 2 page PDF form has multiple textfields, a drop down and a save button. The users partially fill-in the form, select their name from the dropdown and then hit the save button prior to sending the PDF form to the client.
The Save button does the following:
- Passes on the data from the drop down to a label
- Hides the drop down and
- finally, hides itself ('Save' button)
I understand InDesign CC has a lot of the Livecycle capability built-it. Hence I'm trying to design the inteactive PDF within InDesign CC. The textfields, dropdown etc. are easily done. The part that I'm stuck on is to get the 'Save' button to perform the above listed tasks.
Any help will be greatly appreciated.
Cheers

Elizabeth,
Presuming that editing the exisiting BOSTON is not an option, you may:
1) Create a nostroke/nofill rectangle that covers all all word, then give it a white fill;
2) In the Transparency palette flyout tick Make Opacity Mask with Clip unticked and Invert Mask ticked.
That should remove the BOSTON from sight so you can retype it.
You could use a black fill and leave Invert Mask unticked (if the black is black enough).

How to save multiple tables on one single save button in JDeveloper.

hi all,
i have two tables on a JSF page.
the parent and child tables has 1 to many relationship.
its like for department id i have many employee_id's.
in my scenario ,
i have to give values to both parent and child tables at a time on one single click on add button. and after clicking on one single save button i should be able to commit the data into database for both the tables at a time.
its similar like a hire a person in fusion applications , when you clinked on hire person. all the related tables populated to give data and on one single save committing data to database.
please help in this. and its my urgent requirement for my application design.
am beginner to the J Developer Tool and ADF.
regards,
M vijayalakshmi.

I assume you are using ADF BC as your business components. Now if both your Master and Chail VO are instances of the same AM, the commit operation of the AM will take care of it. You just have to drag and drop the commit operation as a Save button in your page

To Disble the Field in Table Control after clicking Save button

Hi,
I have a requirement as follows. i need to disable one field in the table control after clicking save button. i tried with SCREEN elements but it disabling whole the table control but i need to disable that particular one record only in the table control. i found Structure CXTAB_COLUMN in documentaion. it has the properties like invisible. can any body tell how can we disble that particular field in table control only for the one record. and how can we use CXTAB_COLUMN.
Thanks in advance.

hi,
do like this...
in USER_COMMAND_1000 module of PAI,
MODULE user_command_1000 INPUT.
CASE ok_code.
    WHEN 'BACK' OR 'UP' OR 'CANC'.
      LEAVE PROGRAM.
    WHEN 'SAVE'.
      fl = 1.
      GET CURSOR LINE lin.
ENDCASE.
ENDMODULE.                 " user_command_1000 INPUT
and make on module disable in Loop Endloop in PBO.
and write like this...
MODULE disable OUTPUT.
LOOP AT SCREEN.
    IF tab1-current_line = lin AND fl = 1.
      screen-input = 0.
    ELSEIF tab1-current_line < lin.
      screen-input = 0.
    ELSE.
      screen-input = 1.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP.
ENDMODULE.                 " disable OUTPUT
here fl and lin both are type i.....
and there will b one module in PBO
MODULE tab1_change_tc_attr.
in that put if condition....
MODULE tab1_change_tc_attr OUTPUT.
IF sy-ucomm <> '' AND sy-ucomm <> 'SAVE'.
    DESCRIBE TABLE itab LINES tab1-lines.
ENDIF.
ENDMODULE.                    "TAB1_CHANGE_TC_ATTR OUTPUT
ur problem will solve...
reward if usefull....
Edited by: Dhwani shah on Jan 2, 2008 1:17 PM

How can you remove the Save button on a survey?

What options are there to remove the SAVE button from a SharePoint survey?
I need to remove this if possible, I was hoping it would be as simple as editing a form in the Survey list... but that is apparently not the case.
I need to supress the SAVE button as it confuses end users and we don't want any half completed surveys. Either it gets finished or not at all.
Can someone hopefully provide me with an nice simple solution? Or any solution at all :)
Thanks!

Hi,
Save button on the surveys with multiple question or with branching logic enabled is an out of the box feature and it is by design.
If you want to remove the “save” button in a survey, I think you can use JavaScript to hide this button:
1. Open your site in SharePoint Designer.
2. Open your survey list newform.aspx page, in the code view, find this code “<asp:Content ContentPlaceHolderId="PlaceHolderMain" runat="server"> <table>……. </table> “add the JavaScript” </asp:Content>”, add JavaScript before the “</asp:Content>” tag:
<script>
var x=document.getElementsByTagName("input");
for (var i=0;i<x.length;i++)
if (x.item(i).type=="button"&&x.item(i).value=="Save")
{x.item(i).style.display = "none"};
</script>
After this, you will not see the “Save” button when create new survey response. You can also add this JavaScript in the editform.aspx page.
Hope it can help you.
Xue-Mei Chang

How to hide 'SAVE' button in adobe form layout

Hi Friends,
I have a requirement to hide 'SAVE' button in adobe form layout .They dont want to save the form .
Is there any way to achieve this .I have gone through scn ,but couldnt find the proper solution
Thanks and Regards,
Subeesh Kannottil

Hi Subeesh,
Are you talking about restricting the User from Saving the Adobe Form Output.
Regards,
Sivanand Ala

How can I write a code that triggers when clicking on Save button

I want to hide certain fields inside my tracking list, if the login user is not part of the “Managers” group.
To do so I want to add the following Page-load code inside a web part :-
using (SPSite site = new SPSite(SPContext.Current.Site.Url))
using (SPWeb web = site.OpenWeb())
{SPGroup group = site.Groups["Managers"];
bool isUser = site.IsCurrentUserMemberOfGroup(group.ID);
if (isUser)
{textbox.Visible=false;}}
And the following custom code that triggers when saving the form :-
using (SPSite site = new SPSite(SPContext.Current.Site.Url))
using (SPWeb web = site.OpenWeb())
SPList list = web.Lists["ListName"];web.AllowUnsafeUpdates = true;
SPListItem item = list.Items[SPContext.Current.ListItem.UniqueId];
txtTitle.Text = item["Title"] as string;item.Update();web.AllowUnsafeUpdates = false;
But I am not sure where exactly I should add the custom code for the save button ? I tried writing it inside the Oninit method , but I got many errors as shown below:-
So can anyone advice how i should write the web part to include the Page load & the custom save button code?
second question in general is my above approach considered valid , i mean to hide/show list columns using web parts ?

Hi,
According to your post, my understanding is that you want to hide/show list columns based on specify the permission for Users, SharePoint Groups or Active Directory Groups.
Here is a solution from CodePlex for your reference:
SharePoint 2013 Column & View Permission
https://sp2013columnpermission.codeplex.com/
Best Regards
Dennis Guo
TechNet Community Support

How to use bdc code in a report for save button

hi to all can anybody please give some hints that how can i place the BDC code for the save button to pass the values from the editable grid to the standard table here i am sending my code .please advice me.
Moderator Message: Please post only relevant portions of your code. There is a 2,500 character per post limit.
here the second grid is editable.and i have to make changes in the second grid and save it to the standard tables. please advice me resma
Edited by: kishan P on Sep 13, 2010 3:59 PM

Hi,
I have done that many times. Create a button in the toolbar,say 'SAVE'. Write the code in the subroutine user command.For example :
*&      Form USER_COMMAND
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
        RS_SELFIELD TYPE SLIS_SELFIELD.
DATA : REF_GRID TYPE REF TO CL_GUI_ALV_GRID.
DATA: L_VALID TYPE C.
*Code to reflect the changes done in the internal table
IF REF_GRID IS INITIAL.
    CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
      IMPORTING
        E_GRID = REF_GRID.
ENDIF.
IF NOT REF_GRID IS INITIAL.
    CALL METHOD REF_GRID->CHECK_CHANGED_DATA
      IMPORTING
        E_VALID = L_VALID.
ENDIF.
CASE SY-UCOMM.
    WHEN 'SAVE'.
    PERFORM BDC."Write all you BDC code in this subroutine
ENDCASE.
ENDFORM.
Hope this will help.
Thanks & Regards,
Rock.

X:panelTabbedPane + Save button troubles

Similar Messages

Maybe you are looking for