X2200 M2 requires addition serial port
I have some new X2200 M2 opteron servers that require addition serial ports, the server comes with 1, 9 pin serial port and with our other V40z servers we were able to use the DIGI serial port expanders PCI cards.
the X2200 m2 server has
Standard: Riser card assembly with two internal 64-bit, 8-lane, low-profile, half length PCI-Express slots
Optional: Riser card assembly with one internal 64-bit, 16-lane, low-profile, half length PCI-Express slot
1x 16 PCI-E riser supports
DIGI will only support PCI - X so if If the new 2200 Opteron server has PCI-X slots, then the AccelePort Xr920 will work fine. was the response from DIGI
any suggestions on how to get additional serial port on these servers.
Thanks
Earl
Had this NET MGT port ever worked in past ? If not then I'd advise you to open a support case with Sun to get this checked. It might be that your NET MGT port is failed.
-Mehul
Similar Messages
-
I have a cFP-2110 already installed. If i need an additional serial port on it, what could i do (other than buying a whole new cFP)? For example for cRIO there's the NI 9870 module, but for cFP...
Hi,
you could use a NI ENET-232 or ENET-485 serial device in order to add serial ports to your cFP, as explained in the following tutorials:
Adding Networked Serial Ports to Your (Compact) FieldPoint or PXI System
Can I Use the ENET-232 or ENET-485 in LabVIEW Real-Time?
Best regards,
Serena -
Additional Keyboard on serial port
Can I extend the KeyEvent class to handle more than those 114 keys?
I have an additional keyboard hooked up to the serial port.
I generate special custom KeyEvents with special KeyCodes after receiving certain bytews from the com port. I create new KeyStrokes using this KeyCode to be able to address this KeyStroke in a JMenuItem.
The problem is, that the standard KeyEvent spits out: "Unknown KeyCode:..." if I want to set the according KeyStroke as accelerator for a JMenuItem. This seems to stem from the method:
public static String getKeyText(int keyCode)
in the standard KeyEvent thatonly gets the text for KeyCodes between a lower and upper limit and my KeyCodes exceed this limit of course, since there is no space left.
Regards
Joerg HoebelmannAnd how about changing your scenario a little bit?
Since you have a special program to catch signals on COM port, you can enhance it with a logic to run the appropriate action from the menu directly.
If you want to stick to your solution you can try to take a look on the KeyEvent.java (source of KeyEvent.class) - maybe there's a possibility to break the limitation of 114 keys (but personally, I think it will not be possible) -
Dear All
Can classic bluetooth (v2.1) based accessory using Serial Port Profile (SPP) communicate with all iPhones or iPads ?
Is MFi chip required by a classic bluetooth(v2.1) accessory to communiate with iPhone or iPad over Serial Port Profile ?
Thanks
ManjuDue to a copy/paste glitch, some necessary spaces have inadvertently been removed. If I could fix this, I would.
-
Setting additional features of the serial port
I have to set some features of the serial port which are not settable with the
ordinary LabView examples or Vi's. What I am trying to set are:
XonLimit, XoffLimit and Mask RXCHAR RXFLAG TXEMPTY CTS DSR RLSD BRK ERR RING
How can I set these features?Open the VISA configure serial port vi and look how the basic settings are implemented. There is a visa property node that can be accessed : right click on it and select "properties" to access other parameters. You can either modify this vi, or create your own.
CC
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left... -
Serial port: Input/output signal errantly combined
I am currently in the process of using LabView to replace another user interface for a scientific instrument.
LabView is connected to this instrument through a serial port. The instrument streams 25 bytes of binary data every second to the computer. I can read the binary string (VISA Read) and save contiuously to disk using a while loop. In addition, there are a few instructions I can send to the instrument that will do various functions (start logging, turn LEDs on/off, etc). I can successfully send these instructions to the instrument using the previous interface, and in a stand-alone vi using VISA Write, but when I place the VISA Write function into the larger interface vi, signals go haywire. Specifically, there are two separate LEDs that I can toggle with two different commands, but when in the larger interface vi, both commands toggle the same LED. Also, it appears that the singal I send to the instrument (a single ASCII character) immediately bounces back to the computer into the 25 bytes of streaming binary data. In other words, after I press the LED "on" key, one column of my streaming data changes when it is not supposed to (ex: after Binary to ASCII conversion, it changes from a single digit to a twenty digit value).
Initially, I thought the problem was the sequence of VISA Read/Write. In the current configuration, I read all data, then allow for Write commands. Both the VISA functions are within the same While loop to continuously monitor the data. Is it possible the Write signal output is not leaving the while loop and being read as input? What would make the instrument read two different commands as the same one? My goal is to run an interface that displays the streaming data as ASCII, and allows for a few different toggle options while the interface is running - is there are more efficient/elegant way than a while loop?
~Going Bananas
Solved!
Go to Solution.New replies now in gray.
CodeMunkee wrote:
1. If you keep giving me good advice like this, I'll be tempted to change the background to Baltimore prison purple.
I'll ignore this statement.
2. The buffer now lives outside the loop. I understand clearly. Part of the problem might be my instrument - when I cycle power the 19 digit number that was 'echoed' disappears. Forget about that display stuff, it works properly - I accidentally removed the time delay when editing the vi. But you do bring up an interesting point...
Without the delay, the loop ran much faster. If the bytes weren't at the port, the read statement would have returned nothing when it read zero bytes, thus blanking out the indicator rather quickly.
Yes, Hexadecimal display shows 04 to indicate the end of the 25-byte data sample.
Doing a bytes at port read is not always a good idea. If not all the bytes had arrived yet when you ask for the read, you won't get all the data. The remaining data being sent in that stream from the instrument will show up at the front of the buffer on the next read command.
While this isn't a common occurence, it does happen. How can I prevent this from ever happening?
Since you know each commands ends with a hex 04 (ASCII character for EOT), you could enable the termination character when you configure the serial port. Set the termination character to be 4. Then when you execute the VISA read, read a large number of bytes such as 25 or more. The read will terminate at either the timeout, the requested number of bytes, or when the termination character is read. With this setup, you could eliminate the wait statement and also not request the number of bytes as the port. The VISA read will control the pacing of the loop. Any extra bytes after the termination character are part of the next frame of data and will wait around until the next time you read the VISA port.
3. Implementing your ideas for the latch button works better. I am still encountering issues with these commands however. Attached is the new vi. There are two commands I want to send, 't' turns on the LED light (they blink for 30 sec then time out), and the latch works perfectly for that, 'p' turns on the magnetometer light (an additional 'p' is required to turn it off), but I cannot get the command sent to the mag while the loop is running. It turns on either at the beginning of the vi, or at the end of the vi (after Finish button is pressed). This leads me to think the command 'p' is stuck inside the loop. I tried adding another film strip (see attached vi) for the toggles to force the issue, but it didn't work. Additionally, the 'p' command effectively works as a 't' command, and the LED lights begin to blink when I press the 'p' button. This isn't supposed to happen, and leads me to believe the 'p' command does in fact exit the loop but in the wrong manner.
The "film strip" is another frame of a flat sequence structure. It enforces the order of execution. The next frame can't execute until everything in the prior frame has completed. It isn't necessary in your case because the Error and VISA wires determine the order of execution with respect to the other VISA statements. But it shouldn't hurt.
There is no reason the "p" case structure should behave any differently than the "t" case structure. Although you should wire the error wire through in the False case of the "p" structure like you did for the "t" structure. There is no "exiting of the loop" in either case. The loop runs until the stop button is pressed. I would check the manual to see that t and p commands do what you think they should do. Do they need a termination character of their own when they are sent? Should they be upper case letters rather than lower case? You can run NI Spy on your serial port and see the operations occurring with it and see the data coming in and what data is going out. I would be suspicious that the device is not handling the command properly.
Any ideas? I think I've tried to put the toggle buttons outside the loop before, but then could only toggle once before the loop took over. Ideally, these toggles would be available at any time while the data is streaming, so therefore inside the loop?
The toggle buttons need to be within the loop so that they can be read on every iteration of the loop. Outside the loop, as you discovered, they are only read once at the very beginning before the loop is started.
4. Thank you for the suggestion about the Selection Mode for the Open/Create File option. It is annoying to create a file first. I made the change, but I still get error messages when I use a file that does not yet exist. LabView takes me to the first Open/Create/Replace vi when the error occurs. Is there something else I must do?
On the open file VI, there is an input that is Open as default when unwired. Create a constant there and change to Replace or Create.
Remember, if you have any questions about the way LabVIEW is handling something with serial ports, close the port within LabVIEW. Open Hyperterminal and try the commands from there.
Message Edited by Ravens Fan on 01-13-2009 03:55 PM -
CommAPI within servlet returns no known serial ports
I've seen a number of postings for the use of COMMAPI within a servlet but have not yet seen a solution. Working within JBuilder 6, I'm using JDK 1.3.1_04-b02, Tomcat 3.2 and COMMAPI 2.0 on Windows 2000 Pro. Everything compiles fine and I don't get any exceptions.
However, CommPortIdentifier.getPortIdentifiers() returns null. I've used the same code standalone with no problems.
Is the security model getting in the way and do I need to disable or configure the security to allow access from a servlet to the serial ports? Perhaps a parameter within web.xml is required? Maybe an act of God?
Please help as I'm sure a number of people, in addition to myself, would like to know once and for all how to solve this problem.
PS. I've already tried unjarring the commapi jar file into the jre/lib directory without success.DrClap,
Thanks for the advice. After some trial and error, I got it working. I came to the following conclusions via some experimentation.
1. comm.jar is required in the Tomcat lib directory (c:\JBuilder6\jakarta-tomcat-3.2.3\lib) but not the JDK lib directory (c:\jdk1.3.1_04\lib).
2. Similarly, javax.comm.properties is required in the Tomcat lib directory (c:\JBuilder6\jakarta-tomcat-3.2.3\lib) but not the JDK lib directory (c:\jdk1.3.1_04\lib).
3. win32com.dll is required in both the JDK bin directory (c:\jdk1.3.1_04\bin) and the Tomcat bin directory (c:\JBuilder6\jakarta-tomcat-3.2.3\bin).
4. Within JBuilder, library comm.jar must be included in the Tomcat 3.2 configuration. Go to Project->Project Properties...->Webserver tab->Setup...->Paths tab->Classes tab and then add the comm.jar library at the end of the list. Adding it to the global definition of Tomcat 3.2 (Tools->Configure Libraries..., etc) did not seem to achieve the desired result. Perhaps doing so would help with new projects though.
Perhaps you could shed some light on why this arrangement works and how the JVM resolves the various dependencies?
Thanks.
Karl. -
Problem on WinXP / Labview 6.1 with VISA (serial port)
There is a problem on WinXP / Labview 6.1 with VISA which i use to poll the state lines of the serial port. The only functions that i use are "VISA Open", "Find Resource", line state properties and "VISA close".
On my own machine (WinME) it works fine as a standalone application (with runtime engine in the same direction), even if i rename the Labview directory so that Labview is not found.
From my VXIpnp directory i deleted all but these files:
directory "Win95",
subdirectory "Bin" containing "NiViAsrl.dll",
subdirectory "NIvisa" containing "visaconf.dll".
When shipping this to WinXP (and copying "VXIpnp" to the root directory), the serial port was not found, so i renamed the direction "Win95" to "
WinNT", but this did not work also.
I installed the VISA server, although it seems not to be required -- no result.
Final question:
What must i do for distributing the program as a standalone application for all windows platforms?Hey Joachim,
In order to create an installer that includes the VISA Run-time engine for serial IO you will have to purchase LabVIEW 7.x. See screen shot. This packages a small compact version of the run-time that can only be used for serial, but it takes up much less space. The installer that I created has my application, the LV Run-time, and the VISA run-time and it is about 26 MB.
That is much smaller than if I had to include the 32 MB LV 7.1 run-time and the 14 MB VISA run-time separately. It would have been even smaller if I would have uncheck some of the items that I wasn't using.
-Josh
Attachments:
advanced.JPG 31 KB -
Using a PS/2 keyboard on a Sparc workstation through the serial port
We have recently migrated an application that used to run on a PC, to now run on a Sparc Workstation. This is a SunBlade 1500, running Solaris 8. The application is running in a dedicated console which has a fitted keyboard and trackerball that have PS/2 connectors and cannot be changed.
We need a way of connecting the PS/2 keyboards to the serial ports of the Sparc workstation. We already have a piece of software that will read ascii values from the serial port so we definately want to go through the serial ports.
Can someone please suggest what converters will be required to get the output of the keyboard and trackerball as ascii input to the serial port.Actually, that's not a bit perverse, at all.
Jonathan's suggestion is a standard method of connecting to a server.
(null cable between the computer serial ports)
... see the Solaris man pages.
man tip
TeraTerm and Hyperterminal are customarily used on a PC running some dialect of Windows.
The 'tip' command is all that's necessary between Solaris systems.
PS/2 is not a serial connection, but is a keyboard/mouse interface 'invented' by IBM when they offered their XT-class PS/2 line of desktop systems, back in the 1980's.
I found this next link by using Google:
http://members.chello.at/theodor.lauppert/computer/ps2/
The smaller DIN ports were more compact than the AT-class keyboard ports and the mouse moved from a serial port to a dedicated mouse port.
Serial communication devices are not keyboards, per se,
and keyboards are not serial communication devices.
You need other hardware in between to translate what the human being sends, and another computer is a common method to accomplish that translation.
Having said all that ...
Since you cannot change the dedicated console hardware,
I suggest you go to the manufacturer of that console equipment
and have them suggest some sort of serial-to-serial interface lash-up. -
How to get data from serial port to GUI textArea
From Serial Port.....
Messages from base (always 5 bytes):
0xAA, 0, 0, 0, 0xBB - IDLE Mode
0xAA, 0, 0x80, 0x80, 0xBB - Question Mode
messages from terminal (always 6 bytes):
0xAA, a, b, c, chksum, 0xBB
where chksum = a+b+c;
a = address (0-250)
the 2 MSB's of b represenet the answer:
0 0 - A
0 1 - B
1 0 - C
1 1 - D
the 6LSB's of b and 8bits of c is the time for answer, in milliseconds.
(0-16384 milliseconds)
I have VB Code for that but I want the same thing in Java ...
Can any one help me?
Here's VB Code..
VERSION 5.00
Object = "{648A5603-2C6E-101B-82B6-000000000014}#1.1#0"; "MSCOMM32.OCX"
Begin VB.Form Form1
BorderStyle = 1 'Fixed Single
Caption = "Aakar GUI"
ClientHeight = 4665
ClientLeft = 60
ClientTop = 375
ClientWidth = 6105
LinkTopic = "Form1"
MaxButton = 0 'False
MinButton = 0 'False
ScaleHeight = 311
ScaleMode = 3 'Pixel
ScaleWidth = 407
StartUpPosition = 3 'Windows Default
Begin VB.CommandButton cmdPort
Caption = "Open Port"
Height = 375
Left = 120
TabIndex = 4
Top = 600
Width = 1455
End
Begin VB.ComboBox cmbPort
Height = 315
ItemData = "Form1.frx":0000
Left = 120
List = "Form1.frx":0016
Style = 2 'Dropdown List
TabIndex = 3
Top = 120
Width = 2895
End
Begin VB.CommandButton cmdEnd
Caption = "End"
Height = 495
Left = 1560
TabIndex = 2
Top = 1320
Width = 1215
End
Begin VB.CommandButton cmdStart
Caption = "Start"
Height = 495
Left = 120
TabIndex = 1
Top = 1320
Width = 1215
End
Begin VB.TextBox txtMessage
Height = 2040
Left = 119
MultiLine = -1 'True
ScrollBars = 3 'Both
TabIndex = 0
Top = 2475
Width = 5848
End
Begin VB.Timer tmrRead
Enabled = 0 'False
Interval = 1
Left = 2040
Top = 600
End
Begin MSCommLib.MSComm MSComm1
Left = 3120
Top = 360
_ExtentX = 1164
_ExtentY = 1164
_Version = 393216
DTREnable = 0 'False
ParityReplace = 45
SThreshold = 1
End
Begin VB.Label Label5
Caption = "Result Data:"
Height = 375
Left = 120
TabIndex = 5
Top = 2115
Width = 1320
End
End
Attribute VB_Name = "Form1"
Attribute VB_GlobalNameSpace = False
Attribute VB_Creatable = False
Attribute VB_PredeclaredId = True
Attribute VB_Exposed = False
Option Explicit
Dim PortIsOpen As Boolean
Dim Answers(4) As String
Dim RejectKeystroke As Boolean
Private Sub cmbPort_Change()
Debug.Print cmbPort.ListIndex
End Sub
Private Sub cmbPort_Validate(Cancel As Boolean)
'Cancel = True
End Sub
Private Sub cmdEnd_Click()
MSComm1.Output = "e"
txtMessage.Text = ""
End Sub
Private Sub cmdPort_Click()
On Error GoTo ErrorHandler
If cmbPort.ListIndex < 0 Then Exit Sub
If PortIsOpen Then
cmbPort.Enabled = True
MSComm1.PortOpen = False
PortIsOpen = False
cmdPort.Caption = "Open Port"
cmdStart.Enabled = False
cmdEnd.Enabled = False
Else
MSComm1.CommPort = cmbPort.ListIndex + 1
cmbPort.Enabled = False
MSComm1.PortOpen = True
PortIsOpen = True
cmdPort.Caption = "Close Port"
cmdStart.Enabled = True
cmdEnd.Enabled = True
End If
Exit Sub
ErrorHandler:
Debug.Print Err.Number
Debug.Print Err.Description
MsgBox Err.Description, vbExclamation Or vbOKOnly, "Error opening port"
cmbPort.Enabled = True
PortIsOpen = False
cmdPort.Caption = "Open Port"
cmdStart.Enabled = False
cmdEnd.Enabled = False
End Sub
Private Sub cmdStart_Click()
MSComm1.Output = "s"
txtMessage.Text = ""
End Sub
Private Sub Form_Initialize()
Dim tmp As Variant
tmp = InitCommonControls
End Sub
Private Sub Form_Load()
Answers(0) = "A"
Answers(1) = "B"
Answers(2) = "C"
Answers(3) = "D"
'MSComm1.Settings = "9600,n,8,1"
''MSComm1.Settings = "115200,n,8,1"
'MSComm1.PortOpen = True
On Error GoTo ErrorHandler1
MSComm1.CommPort = 1 ' comm port 1
MSComm1.RThreshold = 1 ' use 'on comm' event processing
MSComm1.Settings = "9600,n,8,1" ' baud, parity, data bits, stop bits
MSComm1.SThreshold = 1 ' allows us to track Tx LED
MSComm1.InputMode = comInputModeText 'comInputModeBinary ' binary mode, you can also use
' comInputModeText for text only use
PortIsOpen = False
cmbPort.ListIndex = 0
' open the port
MSComm1.PortOpen = True
cmbPort.Enabled = False
PortIsOpen = True
cmdPort.Caption = "Close Port"
cmdStart.Enabled = True
cmdEnd.Enabled = True
Exit Sub
ErrorHandler1:
Debug.Print Err.Description
PortIsOpen = False
cmbPort.Enabled = True
cmdPort.Caption = "Open Port"
cmdStart.Enabled = False
cmdEnd.Enabled = False
End Sub
Private Sub Form_QueryUnload(Cancel As Integer, UnloadMode As Integer)
If MSComm1.PortOpen Then MSComm1.PortOpen = False
End Sub
Private Sub lblOption_Click()
End Sub
Private Sub MSComm1_OnComm()
' Synopsis: Handle incoming characters, 'On Comm' Event
' Description: By setting MSComm1.RThreshold = 1, this event will fire for
' each character that arrives in the comm controls input buffer.
' Set MSComm1.RThreshold = 0 if you want to poll the control
' yourself, either via a TImer or within program execution loop.
' In most cases, OnComm Event processing shown here is the prefered
' method of processing incoming characters.
Dim i As Long
Dim sBuff As String ' buffer for holding incoming characters
Const MTC As String = vbCrLf ' message terminator characters (ususally vbCrLf)
Const LenMTC As Long = 2 ' number of terminator characters, must match MTC
Dim iPtr As Long ' pointer to terminatior character
' OnComm fires for multiple Events
' so get the Event ID & process
Select Case MSComm1.CommEvent
' Received RThreshold # of chars, in our case 1.
Case comEvReceive
' read all of the characters from the input buffer
' StrConv() is required when using MSComm in binary mode,
' if you set MSComm1.InputMode = comInputModeText, it's not required
'sBuff = sBuff & StrConv(MSComm1.Input, vbUnicode)
'If Len(txtMessage.Text) > 4096 Then txtMessage.Text = ""
sBuff = MSComm1.Input
Dim ch As String
Dim PacketStart As Boolean
Dim PacketLength As Integer
Dim Packet() As String
PacketStart = False
PacketLength = 0
While (Len(sBuff) > 0)
ch = Left(sBuff, 1)
If (ch = Chr(&HAA)) Then PacketStart = True
If (ch = Chr(&HBB)) Then PacketStart = False
If (ch <> Chr(&HAA) And ch <> Chr(&HBB)) Then
PacketLength = PacketLength + 1
ReDim Preserve Packet(PacketLength)
Packet(PacketLength) = ch
End If
'txtMessage.Text = txtMessage.Text + Format(Hex(Asc(ch)), " @@")
sBuff = Right(sBuff, Len(sBuff) - 1)
Wend
If (PacketLength = 3) Then
Debug.Print "Command packet recieved"
'txtMessage.Text = txtMessage.Text + vbCrLf + "Address =" + Str(Asc(Packet(1)))
'txtMessage.Text = txtMessage.Text + vbCrLf + "Address =" + Str(Asc(Packet(2)))
End If
If (PacketLength = 4) Then
Debug.Print "Response packet recieved"
txtMessage.Text = txtMessage.Text + "Address =" + Str(Asc(Packet(1))) + _
" Answer = " + Answers((Asc(Packet(2)) And &HC0) / 64) + _
" Time =" + Str((Asc(Packet(2)) And &H3F) * 256 + (Asc(Packet(3)))) + "mS" + vbCrLf
'txtMessage.Text = txtMessage.Text + vbCrLf + "Address =" + Str(Asc(Packet(1)))
'txtMessage.Text = txtMessage.Text + vbCrLf + "Option =" + Str((Asc(Packet(2)) And &HC0) / 64)
'txtMessage.Text = txtMessage.Text + vbCrLf + "Time =" + Str((Asc(Packet(2)) And &H3F) * 256 + (Asc(Packet(3))))
End If
If (PacketLength <> 4 And PacketLength <> 3) Then Debug.Print "Unknown packet of length" + Str(PacketLength) + " recieved"
txtMessage.Text = txtMessage.Text + vbCrLf
' An EOF charater was found in the input stream
Case comEvEOF
DoEvents
' There are SThreshold number of characters in the transmit buffer.
Case comEvSend
DoEvents
' A Break was received.
Case comEventBreak
DoEvents
' Framing Error
Case comEventFrame
DoEvents
' Data Lost.
Case comEventOverrun
DoEvents
' Receive buffer overflow.
Case comEventRxOver
DoEvents
' Parity Error.
Case comEventRxParity
DoEvents
' Transmit buffer full.
Case comEventTxFull
' Unexpected error retrieving DCB]
Case comEventDCB
DoEvents
End Select
End Sub
Private Sub tmrRead_Timer()
'MSComm1.Output = vbCrLf + vbCrLf
'MSComm1.Output = Chr(128)
End Sub
Private Sub txtMessage_KeyDown(KeyCode As Integer, Shift As Integer)
If Shift = 2 Or Shift = 4 Then RejectKeystroke = False Else RejectKeystroke = True
End Sub
Private Sub txtMessage_KeyPress(KeyAscii As Integer)
If RejectKeystroke Then
KeyAscii = 0
End If
End SubThanks in advance..I want to replicate the entire VB program as Java Program.
This has to be included in my project which i am doing in java. -
How to get a signal from the serial port to start a labview program?
I need to synchronize the data obtained from a program (which is not in Labview)with the data collected with Labview on a different computer. I can send some data strings to the serial port of the computer running the Labview program when the other program starts. However, I need to be able to read the trigger in my Labview program. Do you know what I should do? Thanks.
If you don't have any other programs listening on the COM port, you need to let a LV program run BEFORE the signal comes, otherwise you won't be able to read it. You can have the program wait in a slow timed loop so that it doesn't use up too much CPU time, and when the required "trigger" comes, to move into the main part of the program.
You basically need a while loop waiting for a certain string in the serial buffer. Once the string is found the while loop is exited, and the data acqquisition or whatever else you require from the progam can be performed.
In the example attached the program wait for ANY text to be sent to the COM port. Please note that you need to configure the VISA resource before using it. Once there is something at the COM port, the loop will exit and the rest of the program will be executed.
Hope this helps
Shane
Using LV 6.1 and 8.2.1 on W2k (SP4) and WXP (SP2)
Attachments:
Wait for serisl message.vi 17 KB -
How can I use the output value from SIMPLE PID to write something to the serial port?
I am working on my Senior Design Project that requires the use of incoming compressed air, propotional valves, continuous servo motors, and a serial servo motor microcontroller. I have figured out how to send byte sequences to the microcontroller through LabVIEW using the VISA serial write function. The motors are attached to the valves to control the flow rate. I have created my own simple feedback system using a bunch of case structures but I realized that I am basically trying to recreate the wheel (I basically was writing my own PID VI). I have an older version of LabVIEW (7.0 Express) and theres no way to upgrade or buy the PID toolkit, so I am stuck using the Simple PID VI. Also, the only way the motor works is sending an array of bytes to tell it to turn on/off, direction, and speed. Is there any way I can use the Simple PID VI in conjunction with the VISA SERIAL write function, or is there any other way I can communicate with the serial port using this pid vi? Any information would be appreciated.
Hi gpatel,
you know how to communicate to serial port, but you don't know how to send a value from SimplePID to serial port???
You know how to communicate, but then you don't know how to communicate???
You should explain this in more detail...
Edit:
From you first post you know what values your motor driver is expecting. You know which values the PID.vi is providing. Now all you need is a formula to reshape the values from PID to the motor. It's up to you to make such a formula. Unless you provide any details we cannot give more precise answers...
Message Edited by GerdW on 02-28-2010 08:35 PM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome -
Writing to serial port 1 from a PDA
ok this program is driving me NUTS! i have this microchip which uses a certain protocol... now this protocol requires that you send it some characters in hexadecimal so it'll reset... afterwhich it'll send you a data packet containing the version of the microchip etc etc (it's an aduc812... which you can find on www.analog.com)... anyway, that's not important... i am having trouble actually WRITING to serial port 1... i noticed that doing it through an actual PC requires some sort of "open serial port.vi" which is not available in the pda version... all i have is init.vi which is apparently not enough from what i am told... i thas to be opened first... initialized next... then written to then read from... does anyone know how i can acc
omplish this open procedure with the pda module? is that some sort of software i'm missing? why isn't it included with the pda module add on... etc etc... thank you in advance... i really need help with this so as much information as possible would be appreciated... let me know if you need further info...
christinaHey Christina,
Here is a link to a knowledge base one simply writing to the serial port from a PDA.
http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=E011F478861443EFE034080020E74861&p_node=%20DZ52363&p_source=External
Hope this helps.
Brett -
I pull fiftyfour bytes of data from MicroProcessor's EEPROM using serial port. It works fine. I then send a request for 512 bytes and my "read" goes into loop condition, no bytes are delivered and system is lost
Hello,
You mention that you send a string to the microprocessor that tells it how many bytes to send. Instead of requesting 512 bytes, try reading 10 times and only requesting about 50 bytes at a time.
If that doesn�t help, try directly communicating with your microprocessor through HyperTerminal. If you are not on a Windows system, please let me know. Also, if you are using an NI serial board instead of your computer�s serial port, let me know.
In Windows XP, go to Start, Programs, Accessories, Communications, and select HyperTerminal.
Enter a name for the connection and click OK.
In the next pop-up dialog, choose the COM port you are using to communicate with your device and click OK.
In the final pop
-up dialog, set the communication settings for communicating with your device.
Type the same commands you sent through LabVIEW and observe if you can receive the first 54 bytes you mention. Also observe if data is returned from your 512 byte request or if HyperTerminal just waits.
If you do not receive the 512 byte request through HyperTerminal, your microprocessor is unable to communicate with your computer at a low level. LabVIEW uses the same Windows DLLs as HyperTerminal for serial communication. Double check the instrument user manual for any additional information that may be necessary to communicate.
Please let me know the results from the above test in HyperTerminal. We can then proceed from there.
Grant M.
National Instruments -
HP Mini - Is there a serial port?
On the HP Mini 110-1030NR, I need to use software that communicates through a serial port but the Mini does not show any serial ports. Is there any way to enable the serial port? I have looked in the BIOS and the Advanced section is not listed which is where the HP website support says to go to enable serial ports. Am I out of luck?
Thanks-HI,
DaleWA wrote:
Sorry I mixed too many issues in the last message.
I think the simpler question is: Can I use a USB to serial adapter with the HP Mini 110-1030NR?
If so, how do I get it to work? I have installed the driver that came with the adapter. I know the adapter worked on an old Dell laptop. So, the issue must be the HP.
Do you still have the manual that came with the adapter?
Does the device show up in Device manager?
which OS is installed on your mini?
look under Device Manager of the System Properties screen. (Go there by Start-Setting-Control Panel-System Properties-Hardware-Device Manager-Select View-Device by connection).
The device should have installed as a “USB Serial Port (COMx)” attached to “USB High Speed Serial Converter”.
Change COM Port Properties & COM Port Number
This feature is particularly useful for programs, such as HyperTerminal, which only work with COM1 through COM4. Please ensure that you do not change the COM Port Number already in use.
To change the virtual COM port properties:
Select the “USB Serial Port”
Click “Properties”
Select “Port Setting”
Select “Advanced”
Click the drop down arrow on COM Port Number and scroll to the required COM port.
Select “OK”
Return to the Device Manager Screen. You will see that the USB Serial Port installation has been changed to the new COM Port Number.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer
Maybe you are looking for
-
How to Delete the Software Conponents in BULK from IR
Hi, I have Imported many number of software components those were available in SLD into IR unexpectedly I know we can delete those from IR one by one using this Blog How to : Delete Software Component from Integration Builder But How to delete all th
-
Convert physical standby to logical
Hi everybody!! This is my first message on this forum, altought i have been reading few time before (around 4 months) I have a "problem" in my database environment. I must change a physical standby to a logical standby. This cahnge is possible with d
-
Problem while transfering data from form to excel
Hi all. I have a little problem. I have a procedure that fires on when-button-pressed trigger that goes to current block and download the data into an excel file. The block has 2200 records. The problem is that if I make the application visible all i
-
HT1451 All my iTunes library has disappeared in to the Cloud.
I though it just backed it up and you could simply delete from your computere knowing that music you currently aren't interetsed in was still stored out there. It cleaned me out! I travel a lot overseas and don't connect to the net all the time so th
-
Hi all, Does Oracle Virtual Directory support SSS (Server Side Sorting) ? I try to look for it in the manual docs, couldn't not find any thing there. We use Sun Dir. Server. with Oracle VDE. It seem VDE doesn't allow the sorting, or I have to turn on