X6 - vibrates on SMS but not on calls

I've been using the Nokia X6 for a couple of days now. There's a little thing I can't seem to solve right away: my phone is always on a custom made silent profile in order to have vibrating alert but no ringtone alert. This works perfectly fine when I receive an SMS, but there is no vibration when receiving a call. Hence, there's no malfunction in the vibration or something, it does work. Am I missing some kind of setting here?
Oh, I've read some other topics and I'm working on phone memory, not SIM memory, so that's not the problem.
Thanks ahead!

first back up your data then type in star hash 7370 hash and then the security code is 12345
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

Getting 6120 to vibrate for SMS but not for incomi...

Is there any way of getting the 6120 classic to vibrate for SMS messages, but not for incoming calls? I would like only to be notified by a vibration if a SMS message is received in order to be able to be contacted in an emergency.

your right there pal its not
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

SPA112 - Can receive but not make calls

I have just setup an SPA112 at home behind a NAT router and have configured it to a state where I can receive but not make calls.
It registers fine and remains registered.
The Line 1 Status indicates a State of "invalid" and a Tone of "reorder" when the call fails.
I believe I have fiddled with the dial plan sufficient to ensure that the number is not being rejected based on it. My current dial plan is as follows:
     (*xx|000S0|0[2-9][69]xxxxxxxS0|[69]xxxxxxxS0|04xxxxxxxxS0|xxxxxxxxxxxx.)
I have tried with and without an outbound proxy.
I have attempted to debug the issue, enabling full DEBUG level logging and setting "SIP debug option" to "full", but all I get in the log when making a failed call is the following:
     Jul 23 21:35:29 SPA112 kern.warning [17339229.112000] In cordless Driver Codec 18 and str G.729/8000 chan 0
     Jul 23 21:35:29 SPA112 kern.warning [17339229.112000] In cordless Driver Codec 8 and str PCMA/8000 chan 0
     Jul 23 21:35:29 SPA112 kern.warning [17339229.112000] In cordless Driver Codec 0 and str PCMU/8000 chan 0
     Jul 23 21:35:29 SPA112 kern.warning [17339229.112000] In cordless Driver Codec 2 and str G.726/8000 chan 0
     Jul 23 21:35:29 SPA112 kern.warning [17339229.112000] In cordless Driver Codec 100 and str NSE/8000 chan 0
     Jul 23 21:35:29 SPA112 kern.warning [17339229.112000] In cordless Driver Codec 112 and str encaprtp/8000 chan 0
     Jul 23 21:35:29 SPA112 daemon.notice msgswitchd[310]:   MSGSWD RTCP Reqt len 12 Data 2,17,7304,0
     Jul 23 21:35:29 SPA112 kern.warning [17339229.268000]
     Jul 23 21:35:29 SPA112 kern.warning [17339229.268000] #### RTP STOP Flag set in this channel break ####
     Jul 23 21:35:29 SPA112 kern.warning [17339229.272000] ###### sock_sendmsg return 172
I have been unable to find any information about these warnings on th net.
I can successfully make calls with soft phones configured with similar settings behind the same router.
What am I missing?
Any suggestions appreciated, thanks.

Thanks for the post.
To clarify, I have been testing the connection by attempting calls to and from my mobile phone. If I use my mobile to call the number linked to the VOIP account that the SPA112 connects to, the call is received fine and the call works perfectly; I can hear voice at both ends fine.
If I attempt to call the mobile from the phone behind the SPA112 I immediately get a reorder tone as soon as the number is dialed by the SPA112 (i.e. immediately if it matches a number in the dial plan followed by S0 or after the short wait period otherwise etc.)
On the other hand, if I use a softphone (I've tried MicroSIP and Blink) I can place calls to the same mobile through the same VOIP account from the same LAN behind the same NAT as the SPA112, and the calls are received and bidirectional voice comms works just fine.
I'm not sure if I can make calls internal to my LAN with this setup... I only have the one VOIP account, and have no SIP server on the LAN (if that's the right terminology, I'm new to this).
Unfortunately I'm not sure what you're refering to when you talk about ACL and COR. The topology is very straight forward: the SPA112 (along with a couple of PCs) on a LAN behind a NAT router with an internet connection on the other side. The SPA112 is configured as a DMZ, though I don't believed this had any impact for better or worse. In no test for either SPA112 or softphone have I forwarded any ports or changed any router configuration at all (with the exception of the DMZ).
So the question is why the softphone can place calls fine, but the SPA112 can only receive calls. The dial plan is an obvious answer, but I'm fairly certain I've ruled this out.
If someone can tell me how to get more detailed logging out of the SPA112 that would be very useful as well.

Why is iPhone 6 able to receive calls but not MAKE calls?

I can use apps, internet, and text and receive calls.But not make calls.

Is this a new phone?
Are you a new customer?
Did the phone ever make calls?

Can send SMS but not receive after update...

After updating my iPhone 4S to ios6 i have problems with receiving messages.I can send SMS but not receive. What to do?

Although I don't believe in consequences, I think this might be one of them. My email was working fine until I installed my VPN. I use the Thunderbird email application, which I like a lot, for three Hotmail accounts and two Yahoo accounts. After installing the VPN I could receive mail but could not send it on any of my accounts. I contacted the VPN and they sent me some numeric IP Addresses to put in my account settings. One for the Hotmail accounts and one for the Yahoo accounts. I did as instructed and the email seemed to work okay. It was late in the evening and I went to bed. The next morning, I could send and receive emails on the Yahoo accounts, but could only send emails on all of the Hotmail accounts.
I guess I'd like to know if anyone else is having this same problem. I'd hate to think it was just me. :-)
I would like for Thunderbird to tell me if there is a way to change the outgoing server in the Account Settings, so I can enter the IP Address in there, or does the fact that I entered an IP Address in the Server Name box, cause it to override any other entries? Or should that even make a difference with me receiving mail?
Also, at what time limit does Thunderbird send back a message that the connection to the server timed out? I continually get that message.
I found a way to do a ping on the Hotmail server and the fastest response time for the last two days was 258.09 which seems very slow for a business computer. At least for a business that wants to stay in business. So is that time above the Thunderbird threshold of the connection time out message to be generated?
Thanks for all your help and suggestions, Carole

Report runs OK through concurrent program, but not when called through URL

We have a custom 6i report developed that works successfully 100% of the time when run through a concurrent program.
We are now attempting to integrate this into an OAF application. To do this, we build the necessary call to the reports server by reading different profile options, etc and come up with a URL like this:
http://ebsd777.xxxxx.com:8000/dev60cgi/rwcgi60?d777_APPS+report=XXMFG_ESPEC_REPORT.rdf+P_SPEC_ID=43+DESFORMAT=PDF
This report works 90% of the time when called like this, but the other 10%, we get the following error:
"Error: The requested URL was not found, or cannot be served at this time.
Incorrect usage."
Trying to find what the differences are between the reports that work and those that don't - found that reports which fail seem to extend out further to the right than the reports that do work. But, these reports still fit on standard letter paper in landscape format - as we can verify through the concurrent program call.
Is there some sort of report server setting or parameter which we can change to get this to work when called through the reports server URL?
Any thoughts would be appreciated!
Thanks,
Craig

Hi,
Please post the application release along with the database version and OS.
But when i call the same program through the pl/sql executable of another concurrent program , it does not print the pdf output by defaultHow do you call the program? What is the value of the number of copies profile option?
Please see if these docs help.
Note: 757901.1 - How To Restrict The Number Of Copies To 1?
Note: 729117.1 - How To Specify the Number of Copies to Print by Report?
Thanks,
Hussein

My iphone 5 send sms but not recive sms

IPhone 5 sends text messages but not recive text messages when the message sent from another mobile phone I notice that the message
Send but to not recive to my mobile

For me I get sms but cannot send any. I am using IOS 6.1 on IPohone 5

HT201328 iPhone 4 able to receive calls but not make calls

Hey,
I received a carrier unlock through AT&T. I restored my phone in itunes and received the "congratulation your iphone is now unlocked" message. I am currently living in Belgium and using the Mobistar network. I have bought several sim cards, and none of the sim cards will activate. I can receive calls but not place them. According to the mobostar representative, this is not even possible. I have restored the phone several times using different sim cards.
Is there potentially a problem with the phone itself? Everything is showing as if it should work, but I am unable to fix the problem - as well as the service provider here cannot.
-Al

Have you tried these two:
Toggle Airplane mode on and off. Wait five seconds between the on and off modes.
Reset Network Settings. Tap Settings > General > Reset > Reset Network Settings.

UCCE receive QtoA calls, but not QtoSG calls?

Has anyone been faced with this problem and come up with an elegant solution? We're looking to see if it's possible for agents to stay in a ready state and continue to receive queue to agent calls, but not receive queue to skill group calls. We've thought about having supervisors remove their skills, but this is not scalable when you have a large number of agents. Another solution could be to give agent reskilling access to all agents, but this also would be an adminitrative nightmare. Anyone?
david

Let's think of this example:
I work in tech support for an ISP. In the mornings I answer customer calls and open a case for any new calls and in the after noon I do call backs to follow up on cases I have in my CRM queue. In the afternoons I don't take any new calls which result in new cases, just work on cases I own. A customer calls in and enters their case number, this is a case that was opened in the past and is assigned to me. In this scenario the agent didn't have to call the customer to follow up, the customer called the agent instead. The problem is that if you're in a ready state and assigned to a skill group, you will get new calls not just calls that are in your queue.
We're trying to prevent new calls from going to that agent. No matter how I slice this, we need some trigger which tells the system that the agent should no longer take SG calls. Then undoing this trigger is the next tricky part. I would love to solve this within ICM/CVP, but it's looking like custom desktop and maybe ConAPI might be the only solution.

How can I turn off ring for notifications e.g. messages but not for calls?

Simple question:
Is there a combination of settings where I can turn off sounds and vibrate for notifications e.g. whatsapp, facebook but still have it vibrate for calls.
E.g. if its in my pocket I'd prefer not to keep getting vibrations, but it would be necessary to know if someone is calling
Thanks

i dont know about whatsapp or other 3rd party apps 0 they may have setting options to do what you want - but for text messages and Facebook posts you can go to Settings/Sounds and set the sound for those 2 things to None

Procedure runs in SQL Plus, but not when called from my Oracle Form

Hi. I have this code to send an email alert as the user updates a record on my base table from my Oracle Form. I use dbms_scheduler so that it's submitted as a background job and so the email processing does not delay my Oracle Form from saving quickly. If I submit this code in SQL Plus it executes and I receive the email as expected.
begin
dbms_scheduler.create_job (
 job_name => 'IMMEDIATE_JOB',
 job_type => 'PLSQL_BLOCK',
 job_action => 'begin TTMS.dropperVacationConflict_Notify (62547, ''01-SEP-11'', ''02-SEP-11''); end;',
 number_of_arguments => 0,
 start_date => sysdate +1/24/59, -- sysdate + 1 minute
 enabled => TRUE,
 auto_drop => TRUE,
 comments => 'Immediate, one-time run');
end;However if I submit this code from a Post-Update trigger in my form the code runs without error, but my email is never received (the same parameter values would be passed to this trigger):
begin
-- Submit the email notification in the background so as to not slow down the screen while saving.
dbms_scheduler.create_job (
 job_name => 'IMMEDIATE_JOB',
 job_type => 'PLSQL_BLOCK',
 job_action => 'begin TTMS.dropperVacationConflict_Notify (:dropper_vacations.dropper_id, :dropper_vacations.begin_dt, :dropper_vacations.end_dt); end;',
 number_of_arguments => 0,
 start_date => sysdate +1/24/59, -- sysdate + 1 minute
 enabled => TRUE,
 auto_drop => TRUE,
 comments => 'Immediate, one-time run');
end; Any ideas why this might be happening?

Wow, so I changed the two procedures so that I'm only passing in one number parameter and one char parameter...
CREATE OR REPLACE procedure TTMS.job_vacationconflict_notify (p_dropper_id number, p_other char) IS
CREATE OR REPLACE PROCEDURE TTMS.dropperVacationEmailURL_new (in_dropper_id number, in_other char) ISIf I execute it like this it works and I get the email:
TTMS.job_vacationconflict_notify(62547, 99999);or like this it works and I get the email:
TTMS.job_vacationconflict_notify(62547, '99999');But if I execute it like this (I get no errors) the email is not sent:
TTMS.job_vacationconflict_notify(62547, 'ababa');So this problem really has nothing to do with date formats. It seems to have to do with whether parameter two has characters in it!!! What the heck.
Any ideas on this?
Here is the procedure I'm calling:
CREATE OR REPLACE procedure TTMS.job_vacationconflict_notify (p_dropper_id number, p_other char) IS
begin
dbms_scheduler.create_job (
 job_name => 'IMMEDIATE_JOB',
 job_type => 'PLSQL_BLOCK',
 job_action => 'begin TTMS.dropperVacationemailurl_new ('||p_dropper_id||','||p_other||'); end;',
 number_of_arguments => 0,
 start_date => sysdate +1/24/59, -- sysdate + 1 minute
 enabled => TRUE,
 auto_drop => TRUE,
 comments => 'Immediate, one-time run');
end;
/And the above procedure is calling this procedure which should be sending the email alert:
CREATE OR REPLACE PROCEDURE TTMS.dropperVacationEmailURL_new (in_dropper_id number, in_other char) IS
 myguid varchar2(15):=null;
 pcm_contact varchar2(3):=null;
 guid_contact varchar2(15):=null;
 conflict_cnt number(8):=0;
 -- Various declarations
 PSENDER VARCHAR2(200); -- From
 PRECIPIENT VARCHAR2(200); -- To
 P_CC_RECIPIENT VARCHAR2(200); -- CC
 P_BCC_RECIPIENT VARCHAR2(200); -- BCC
 PSUBJECT VARCHAR2(200); -- Subject
 PMESSAGE VARCHAR2(6000); -- Message Body
 PPARAMETER NUMBER; -- Parameter Value
 guid_valid varchar2(15); -- Used to grab the validation value of
 -- Grab name details of e-mail targets
 cursor targets is
 select guid, initcap(first_name) first_name, initcap(first_name)||' '||initcap(last_name) fullname
 from pwc_employee
 where upper(guid) = upper(guid_contact);
BEGIN
 select count(*)
 into conflict_cnt
 from dropper_bundle_assign
 where
 dropper_sched = in_dropper_id and
 trunc(sched) <> '31-DEC-29' AND
 trunc(sched) between '01-SEP-11' and '02-SEP-11' and
 trunc(sched) > trunc(sysdate);
 select distinct pcm
 into pcm_contact
 from dropper_bundle_assign
 where
 dropper_sched = in_dropper_id and
 trunc(sched) <> '31-DEC-29' AND
 trunc(sched) between '01-SEP-11' and '02-SEP-11' and
 trunc(sched) > trunc(sysdate);
 select guid
 into guid_contact
 from pwc_employee
 where initials = pcm_contact;
 -- Ensure required parameters have been passed
 if guid_contact is not null
 and in_dropper_id is not null then
 Begin
 select guid
 into guid_valid
 from pwc_employee
 where upper(guid) = upper(guid_contact);
 Exception
 when no_data_found then
 raise_application_error(-20000,'Invalid Recipient. Please check the employee table. Please try again.');
 End;
 -- In the event there are multiple targets then we will loop thru and send individual emails
 for thisone in targets loop
 PSENDER := lower(user)||'@us.ibm.com';
 PRECIPIENT := lower(thisone.guid)||'@us.ibm.com';
 P_CC_RECIPIENT := lower(thisone.guid)||'@us.ibm.com';
 P_BCC_RECIPIENT := 'ssbuechl'||'@us.ibm.com';
 PPARAMETER := TO_NUMBER(lower(in_dropper_id));
 PSUBJECT := 'TEST: Dropper Vacation '||in_other||' Conflict Notification for dropper '||in_dropper_id||' - Action Required';
 PMESSAGE := thisone.first_name||'- There is an induction conflict due to a new or updated dropper vacation. Click here to the dropper''s vacation conflicts: <a href="http://9.35.32.205:7777/forms/frmservlet?config=TTMSMENU&form=dropper_vacations&otherparams=p_dropper='||PPARAMETER||'">Dropper Id: '||PPARAMETER||'</a> (note: use your Oracle credentials when prompted for log-on information). Thanks.';
 SEND_MAIL ( PSENDER, PRECIPIENT, P_CC_RECIPIENT, P_BCC_RECIPIENT, PSUBJECT, PMESSAGE ); -- Procedure to physically send the e-mail notification
 end loop;
 else
 raise_application_error(-20001,'Recipient and Parameter Value are required. Please try again.');
 end if;
exception
 when no_data_found then
 raise_application_error(-20002,'Note: Email will not be sent because no PCM was identified as the manager or the PCM does not have a record in the Employee table. See ITS for assistance.');
 when too_many_rows then
 raise_application_error(-20003,'Note: Email will not be sent because multiple PCMs manage this dropper. Please notify each PCM manually.');
END dropperVacationEmailURL_new;
/Edited by: sharpe on Aug 17, 2011 4:38 PM
Edited by: sharpe on Aug 17, 2011 5:03 PM

You can see the numbers on call id but not the caller name

I can see the number when an incoming call comes in, but I can not see the name even though it is in my contact list. Can someone suggest how to correct his issue?

Please give us the exact error message.
Please state your operating system.
Please state the exact version of Lightroom you are using.
Please give us any other relevant details.
What does this mean: "Now all of a sudden I can see the images on the screen"? Are you looking in Lightroom or your operating system or the camera screen? Where?

Phones can receive but not make calls

I have an issue similar to the link below. About 2 weeks ago we had one phone not able to place calls. It could receive calls but could not dial out. Reseting the phone did not fix the problem. I configured a 2nd phone with a button using the same DN and it couldn't place outbound calls either. It seemed like the problem was with the DN not the phone. In any case I rebooted the UC520 and the problem went away. About a week later a 2nd, different phone was affected by the same problem and I had to reboot again. In my case neither the config or IOS and CME versions have changed in almost 2 years. I don't understand why this would start happening with no changes to the system. I am running IOS 15.1(2)T2 and CME 8.1.
Any ideas how to troubleshoot this? What would be good debug commands to use and/or gather more info?
Thanks,
Diego
https://supportforums.cisco.com/message/3721512#3721512

That makes no sense at all. The phone doesn't know or care what kind of phone is calling it. There's something else causing this. Contact your carrier.

Contacts - appears when use of whatsapp or sms but not while using contacts to dial

i have a problem, few names / contacts do not appear whein i use 'contacts'.
whereas the same names / conacts appear when i search using sms text messages or using whats app but does not appear when i use 'contacts'.
kdindlly assist.
Sonal Gandhi

try copying all the contacts to the device using import contacts

Can call out but not receiving calls

I can call out to any number but when you dial the phone number(yes it is the right #) it says phone not in service.

We have had the same problem for almost a year now. We can call out, and the number is correct. Cannot receive any calls, message says number not in service. Meanwhile I have to pay both AT&T and Comcast so I don't lose my number. When I call Comcast I am told the problem is not on their side. I will be calling the Illinois Commerce Hotline and filing a complaint against Comcast. I have asked for a credit on my bill, since I am not receiving the service I am paying for, and no response from Comcast. Maybe a lawsuit is in my future for failure to provide services that were paid for.

X6 - vibrates on SMS but not on calls

Similar Messages

Maybe you are looking for