X61: BIOS Update with/from USB Stick or 3rd party CD-ROM

I was trying to update the BIOS of my X61 (7673-CTO) but surprisingly read, that with Vista 64Bit I am only able to do this via a bootable CD which is fine for me (although to my very personal opinion a bit old-fashined). The bigger problem is, that this CD obviously does NOT boot properly from/with a third party external USB-CD-ROM, which I personally think is outrageous! So I am somehow forced to buy "an original Lenovo-Drive" to make a BIOS update?? Forum, please proove me I am wrong!

Hello all,
I, too, found this oversight on the part of Lenovo to be quite distressing. It is possible to upgrade the X61 BIOS with a USB thumb drive. I have provided directions at http://ubuntuforums.org/showthread.php?t=817897
The above tutorial is aimed towards Ubuntu Linux users. However, I believe that users of Vista should be able to follow along. Please let me know if you have any questions... the process is simple enough that it should be possible with any OS out there right now.
Mike

Similar Messages

Portege P3500: It's possible to start from USB-stick?

Is it possible to start from usb-stick? i have tried to make a bootable usb-stick , and it really worked on my pc at home , but not on the laptop ..bios settings are ok , as far i know (usb-fdd legacy enable , first boot device fdd)
where is the problem ?

Try to update bios. Even though it has that option does not mean that it will. Make sure in BIOS that legacy emulation is enabled as well. Then connect your USB and turn on the computer. Go into bios and check to see if your USB keystick is located under boot devices, which it should be. Other then that, you might have installed the boot program wrong. CD's etc have a boot.ini file. Basically an ini means initiate. So boot.ini initiates boot process. If this is configured wrong, or doesnt exist on the boot device you are using, it will not boot from the device even if configured in BIOS.

Can all macbooks boot from usb(stick,hdd) and firewire(hdd) an os: linux, win, mac os x, opensolaris, etc

Subject: BOOT FROM EXTERNAL STORAGE DEVICE - After this setup properly
Can all macbooks boot from usb(stick,hdd) and firewire(hdd) an os: linux, win, mac os x, opensolaris, etc?
what about:
Apple MacBook Pro MB133LL/A 15.4-inch Laptop(OLD VERSION) (4GB RAM 120G HD 2.33 GHz Core 2 Duo processor, 15.4" Matte Screen, 4GB memory, 120 GB 7200 rpm hard drive) White

Yes,
Disconnect everything hooked up to the PC except the keyboard, mouse and monitor.
Then use this method to flash the BIOS. It is the safest way to go.
USB Device BIOS Flashing in DOS
DOS Flash (DOSFlash.exe, FlshUefi.cpu) is the DOS-compatible System BIOS flash utility that can be used from a DOS bootable storage device (where "DOS" refers to any of a number of compatible operating systems such as FreeDOS, MS-DOS or DR-DOS). FlshUefi.cpu is the required driver for DOSFlash.exe. To flash the System BIOS from a bootable USB storage device, you will need to copy the contents of the DOS Flash folder to the USB device, boot the PC from the USB device, and execute the DOSFlash application. To see a more complete description of the DOS flash utilities, view DOSFlash.txt located in the DOS Flash folder. This folder also contains the required binary image of the BIOS. The binary image file is named xxx_MMmm.bin where "xxx" is the BIOS family, "MM" is the major version number, and "mm" is the minor version number. This file can be copied to the root directory of any USB removable medium for use with the F10 setup "Flash System ROM" option
View Contents of DOS Flash Folder
The links on this post don't work. I copied the section from the BIOS flashing instructions for the specific section you need.
Paul

NEED HELP! - Installing Camera raw presets from USB Stick

NEED HELP! -installing Camera raw presets from USB Stick.
I am attempting to install the Camera Raw Presets.
It says to put them into User Name/Library/Application Support/Adobe/CameraRaw/Settings...
When I get to CameraRaw the ONLY folders in there are CameraProfiles & Lens Profiles.
I have searched everywhere looking for a CameraRaw-Settings folder and cannot find one.
I have latest version of CameraRaw installed and still no settings folder.
I even attempted to find it by looking in camera raw where it has saved the custom settings I made as presets and it shows that they are saved but will not show me where.
I am using CS5 specifically Photoshop v12.0.4 and Bridge. I have Lightroom 4. I have iMac OS 10.7.3
Do I need to reinstall Camera Raw and how do you do that?
Will I then lose my presets that I made in CameraRaw?
Thanks for your help

Here is a note from the ACR 7.1 beta release. http://labs.adobe.com/technologies/cameraraw7-1/?tabID=details
Perhaps this answers question.
Frequently Asked Questions
Why is it no longer required to place the plug-in file in the specified directory on my hard drive?
The Camera Raw update process has grown to include lens profile and camera profile files which are easiest to install via a single installer process instead of updating several different directories manually.

Trouble opening Jar from USB stick on a Mac

Hi all,
Has anyone else had any problems running Jar files from a USB stick on a Mac -- directly clicking on them in the finder?
What I've found:
- I cannot run any Jar file I try if it is on a USB stick and I double-click on the jar file in my Mac
- I CAN run jar files from a CD by double-clicking
- I CAN run jar files from USB sticks on Windows directly from the window
- I CAN run jar files from a USB stick on a mac if I call "java -jar" directly from the terminal
I have tried running from USB sticks on several different Macs, and I've tried a number of different Jars that I've created over the years -- nothing works. The Java code isn't doing any path-based finding of files or anything like that.
Anyone else tried this? Are there any solutions?
Thanks,
Sam

Try this:
With the stick plugged in, go to Finder->Applications->Utilities->Disk Utility. From there, you should see your memory stick appear in a sidebar on the left. Click on it, then click on the "erase" tab and follow the instructions.

OS X Lion USB Thumb Drive can run from usb stick?

OS X Lion USB Thumb Drive can run from usb stick[no install]?

Your questions are easily answered by means of a web search, which you can do as well as I can. You can order a Lion installer on a USB stick. I don't know how big it is, and it doesn't matter, because all you can do with that stick is install Lion, which is what you don't seem to want. If you have a Mac and want to be able to run Lion from an external storage device, the capacity of the device has to be at least 7 GB.
Apple - OS X Lion - Technical specifications
I hope you understand that if you buy the Lion USB installer with the intention of installing onto a PC, or running Lion on a PC without installing, you'll be wasting your money. It won't work.

Can i start mba from usb-stick ?

hi
is it possible to start a mba from usb-stick with osX ?
thanks for response.

is it possible to start a mba from usb-stick with osX ?
Yes, if the stick's large enough and formatted as Mac OS Extended (Journaled).
(53239)

How to transfer files from USB stick

How can you transfer files from USB stick to ipad2?

Buy a portable wi-fi router with file sharing such as MOCREO 5-in-1 Portable WiFi (not personaly vouching for this one it just happens to be the one I have and it cost less than the apple connection cables).
Plug your USB stick into the router
Connect your phone via wi-fi to the router.
Log into the routers built in file managment or use any FTP capable app to connect (GoodReader, ifiles, etc)
Transfer files.

Howto boot recovery discs from usb stick

hi.i have t40 and i just bought recovery media(because predesktop area is dead).i tried many ways but i cant afford to boot recovery medias from usb stick.which tool should i use?? i dont have optical drive??

Hello mate,
What version of windows are using ? It's possible with windows 7.
http://forum.lenovo.com/t5/X-Series-ThinkPad-Laptops/Making-a-usb-stick-with-the-Lenovo-recovery-par...
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

Synchronizing files on multiple computers with 1 usb stick

i would like to synchroze a number of different files and folders on 2 or more machines with a usb stick. each folder exists normally only on 1 machine and the usb stick, so the stick should synchronize different folders when connected to different machines.
as an example; on computer 1 i have files a, b & c of which i would like to have a current backup version on the usb. on computer 2 i have files d and e.
so on the stick i have files a, b, c, d and e.
every time when the stick is used with computer 2, i want to synchronize files d and e only. every time when the stick is used with computer 1, it should synchronize files a, b and c only.
instead of installing just any synchronization software on every machine that i would use, i would prefer to have the program installed only on the usb stick and run it from there.
theoretically it whould then find its settings in ~/Library/Preferences where it will find settings specific for that machine (whether to synchronize files a, b and c or files d and e)
all machines i'd be using for this run various versions of os 10, but all 10.3.9 or later
so far theory - is there anyone who's done this? with how many machines? any experiences? things to do or to avoid?
thanks

No problem. Post back with any questions. We'll see what we can come up with...
Playlists can be exported and imported between iTunes setups. Not sure you can truly 'merge' the embedded meta-data in the IL file. Only what is stored within the song file itself.

Boot from usb stick a usb stick OS like Linux

The below can boot from usb stick a usb stick OS like Linux on stick?
Apple MacBook MB403LL/A 13.3-inch Laptop (2.4 GHz Intel Core 2 Duo Processor, 2 GB RAM, 160 GB Hard Drive) White
Apple's Mac OS X 10.5 Leopard operating system can upgraded to Lion? If yes this has any impact in this laptop (Is it best leave like is the Leopard?)?
memory can upgraded with this[15' or 13' RAM is the same?]:
Kingston Apple 4GB Kit (2x2GB Modules) 667MHz DDR2 SoDimm iMac and Macbook Memory (KTA-MB667K2/4GR)
http://www.amazon.com/Kingston-Modules-Macbook-KTA-MB667K2-4GR/dp/B001265GI2/ref =pd_sim_pc_2

Hmm, when you mean "bootable" are you meaning booting a operating system from the USB to run the computer with?
Because that's what "booting" means, not mounting, which is what I think you mean.
I say this is because you mentioned a PC, and a generic PC can't normally boot from a USB with OS X installed without a LOT of extra help of the hacking/breaking software agreement kind which is beyond the capability of most.
If you mean your USB thumb drive is not mounting or showing up on the computer to trade files, then please tell us how you formatted the USB or if you didn't or not and it's volume size.
Also if it does have OS X on it, what version and where did you install it from, because it might be lacking the hardware drivers for the other Mac.

K7T Turbo2 - how do I tell BIOS to boot from USB?

I have an old K7T Turbo2 system, and I'm trying to install Windows 7 on it. I guess that's my first question - am I going to run into any nasty problems running W7 on this board, other than RAM limitations? I have a version of "Tiny7" (which installs from CD-ROM) installed already and it seems fine, but I'd rather run a fuller non-pirated OS, and that means installing from a DVD/iso. I don't have a DVD drive installed and it would be a bit of a pain to acquire one, so I'm hoping to boot from USB to winstall W7.
I have a PCI USB2.0 card installed in the system, which seems to work fine. I've set the BIOS to boot from USB-FDD (but I've also tried USB-CDROM and USB-ZIP). I have BIOS 3.6. I've tried booting from the PCI USB2.0 hub (will that ever work or does the BIOS not recognize it?) and from the regular USB1 port on the mobo (but my USB flash drive is USB2).
Is there something else I need to do in the BIOS to get this to work? Will it never work no matter what I do?
I read somewhere about a BIOS setting to "enable legacy USB support" but can't see anything like that in my BIOS settings.
Any suggestions? (thanks in advance)

If there is no option to boot from USB-HDD then it may never work.
Long shot I know, but what if you connect your USB drive, then power on your system, and press F11 when the logo/POST screen appears, does the drive show in the Boot Menu that appears?
Quote
I don't have a DVD drive installed and it would be a bit of a pain to acquire one
Really? DVD drives are very common, and cheap as chips! You can pick up a brand new DVD writer, for the price of a (good) DVD movie.
http://www.newegg.com/Store/SubCategory.aspx?SubCategory=5&name=CD-DVD-Burners&Order=PRICE
(Obviously, you'll need an IDE/EIDE type )

IMacs can boot Linux or Windows from usb stick

iMacs 21' can boot Linux or Windows from usb stick? from Firewire 400 or 800 hdd/ssd? from USB HDD/SSD?
May boot fromCD/DVD/DVDDL in internal DVD DRIVE, too?
Exist Blu-ray drives able connect on Thunderbolt slot on iMac 21'?

Here is the memo of the steps I followed. Hope this helps.
<Create VHD image in temp folder at local drive>
diskpart
create vdisk file=C:\Temp\Win2go.vhd maximum=20480 type=fixed
select vdisk file=C:\Temp\Win2go.vhd
attach vdisk
exit
<Create partition in VHD, format in NTFS and assign drive letter "O">
diskpart
list disk
select disk n （n is a number of VHD）
clean
create partition primary
format fs=ntfs quick override
assign letter=o
active
attribute volume set NODEFAULTDRIVELETTER
exit
<Execute "DISM" utility in Windows DVD and extract installer image to VHD>
G:\sources\dism /apply-image /imagefile:G:\sources\install.wim /index:1 /applydir:O:\
** "G" is drive letter for Windows DVD
** "O" is drive letter for VHD partition
<Write boot program into VHD>
O:\windows\system32\bcdboot O:\windows /f ALL /s O:
** "O" is drive letter for VHD partition
<Detach VHD>
diskpart
select vdisk file=C:\Temp\Win2go.vhd
detach vdisk
exit
<Format USB thumb drive in NTFS>
diskpart
list disk
select disk n （n is a number of USB thumb drive）
clean
create partition primary
format fs=ntfs quick override
active
exit
** "E" is drive letter for USB thumb drive
<Write loader into boot sector>
G:\boot\bootsect /nt60 E:
** "G" is drive letter for Windows DVD
** "E" is drive letter for USB thumb drive
<Copy VHD file to USB thumb drive and mount>
copy C:\Temp\Win2go.vhd E:\
diskpart
select vdisk file=E:\Win2go.vhd
attach vdisk
exit
<Write boot info into USB thumb drive>
F:\Windows\system32\bcdboot F:\Windows /s E: /f ALL /v
** "E" is drive letter for USB thumb drive
** "F" is drive letter for VHD partition on USB thumb drive

MOVED: [Athlon64] Failed Bios update with both Live Update and Dos version = badchecksum shutdown

This topic has been moved to AMD64 nVidia Based board.
[Athlon64] Failed Bios update with both Live Update and Dos version = badchecksum shutdown

Sometimes bios recovery is a long shot .
But the award bios v.6 is supposed to be able to do it if the bootblock is still intact.
Best way seems to be to strip it down to minimal configuration , disconnect all drives except floppy , one ram module , perhaps without video card also .
Look here :
http://pages.sbcglobal.net/jefn/bootblock.html

No GRUB menu when booting from USB stick with new archlinux

Hi,
I want to try archlinux but I do not have a full backup of my current system right now, such that I do not dare to install archlinux on it. I decided to install it on a USB drive and followed the Beginners Guide considering the hints for installations on USB sticks.
The first issue that I had was that I was not able to to install gurb and it complained that no boot partition was available. I started from scratch again but this time choose the partition type EF02 (bios boot partition) instead of the default 0700 (I only have one partition on the stick). This time everything went fine until I rebooted from the USB stick. Instead of a grub menu I got:
GRUB GRUB GRUB GRUB GRUB GRUB
and nothing happened.
I booted again from the boot cd with archlinux and did the following to examine the grub installation again:
mount /dev/sdb1 /mnt
arch-chroot /mnt /bin/bash
grub-install --recheck --boot-directory=/boot /dev/sdb
>Installation finished. No error reported.
grub-mkconfig -o /boot/grub/grub.cfg
>Generating grub.cfg
>Found linux image: /boot/vmlinux-linux
>Found linux image: /boot/initramfs-linux.img
> WARNING: Failed to connect to lvmetad: No such file or directory. Falling back to internal scanning.
> No volume groups found
>Found LMDE MATE Edition (1) on /dev/sda1
>done
I don't know what the grub-mkconfig output should look like...
Do you have any idea how I can fix this?
Thanks in advance!

Welcome to Arch!
EF02 is definitely not the type code you want. That is used for a small partition with no file system which grub needs on GPT disks because it cannot fit into the space on disk. You don't install anything into it and it is 1-2MB.
Perhaps https://wiki.archlinux.org/index.php/Usb_installation would help?

X61: BIOS Update with/from USB Stick or 3rd party CD-ROM

Similar Messages

Maybe you are looking for