Billing of service associated with a stopped deactivated VM
I read in the azure sites that a VM is not charged for when its state is stopped(deallocated), and that compute hours are calculated on the services even when the service is in stopped state.
Will compute hours be calculated on service associated a VM in deallocated state?
hi,
As far as I know, Azure VM could calculated the hours of your VM usage nor the release hours of VM (Deallocated state). And if your VM is in stopped(deallocated) state, You will be not charged. About the VM states, you could refer to Craig's post form
this thread(
http://social.msdn.microsoft.com/Forums/windowsazure/en-US/f608528e-a9f8-45b3-8d23-4211168cc087/stopped-deallocated ).
Hope it helps.
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Similar Messages
-
Remove account associated with router
Hi, I disconnected my comcast service and sold the router that I bought to someone else with Comcast, but he cannot activate the router until it is deactivated from my account, which apparantly is an additional step that I was never made aware of and must be done even though my Comcast account has been disconnected. Is there a way to disconnect the service associated with the router without going to a Comcast service center? It seems like since the service was set up remotely and nothing was installed on the router, it should also be able to be disconnected remotely. Thanks for your help. -Bill
First, you must mean modem, not router. Routers do not have to be activated.Bring the modem info to a comcast office and do it there. Calling will not work.
-
I recently updated the software on my ipad2 to 5.0.1 and when I send a message via "chat" it shows on all the iPhones associated with my account (my sisters, my husbands, etc) is there a way to stop that?
If you have been using your phone as recommended, you should have minimal data loss from the inability to restore from a backup.
Contacts and calendars should be synched to a computer application like Outlook or Address Book (or a cloud service like Google Contacts or iCloud). The update process does NOT affect these computer applications so your contacts and calendars should be safe and sound in the application ready for synching back to your phone.
Same for photos. It is recommended that photos be imported to your computer as soon as possible after taking them (just as you would import them from any other camera) for storage, archival and safekeeping. Again, your photos should be safe and sound on your computer.
If you've not been using your computer as recommended, you've learned a very hard lesson, I'm afraid. -
Can i edit my game center account to stop sharing friends and games from another apple id that associated with my own new apple id.how to reset it without losing my apple id and i can stiil use it? Because i've made lot of paid purchases using this apple id. In my game center account i have so many games data that i'd never installed.i wanna stop sharing friends and games with this xxx apple id in my old ipad version ios 4.2. and i can still keep using this apple id in my new ipad 3rd gen version ios 6 without sharing game and friends with this xxx apple id? and how to remove the games data that i never downloaded in my ipad but still registered at my game center account.i wanna keep using this apple id coz so many fav application i've purchased from this id. the answer as soon as possible if there is some one can help me to solve it.thank u for reading my question and very big thanks for anyone who can give me a helpful answer.
Why do you ask in the iWeb forum?
-
This is the listing of what we have:
Ipod Touch 4th Gen for daughter
Ipod Touch 5th Gen for another daughter
Ipad 3
Ipad Mini
Iphone 4S
Iphone 4S
For sharing/downloading convenience, all of these are linked to one apple ID. iMessage and FaceTime were working flowlessly when we set it up. Yes, there was a problem initially where some devices were receiving someone else's texts, but they were resolved when I went to Settings and chose a specific # or email address for each DEVICE (so there's no overlapping)
All of a sudden, my daughter's Ipod Touch 4th Gen started having problems sending messges. Sending bar will go up to the end then stop right before it gets completely full--end result, message not delivered. I tried to facetime her, but nothing happens. Sometimes when I try facetiming ipod touch 4th, I'd get an error message '____ is not available for FaceTime'
I've confirmed the email address associated with ipod Touch 4 has been added and verified under my apple ID. I've tried restoring the iPod in iTunes, hard resetting the unit, turning off and on iMessage/FaceTime... and still doesn't work.
All our software is up to date. By the time I started thinking maybe ipod touch 4th gen is getting old, my husband's newly bought ipad MINI started having the same problem.
This is really frustrating---help?We're screwwwwwed! Not THAT familiar to apple, just barely plugging along and dove in with two ipads and two ipod touches. Previous experience was just two ipods (160 GB) that I had to still rotate audio books out of every few months... well, for me. My wife doesn't use hers as much. ANYWAY, I lost a zillion things with the ipod classic since it didn't have a back-up option and many of the CDs I scrounged up when it first came out were already lucky to have survived college. 8 years later and the computer that had the original files had been replaced umpteen times. ipods failed and decided to quit being a tight wad. Not sure if these gifts are worth it yet.... well, two of them were.
-
how do i edit my billing info if my credit card associated with apple id expired and i have a duty to app store from the time when i had the old credit card?
so the thing is a few days ago i made an app store purchase and i didn't know i was running out of money on my credit card. i realized that only when i tried to purchase another item and it didn't work. nothing special til here. the problem is that meanwhile my credit card was replaced by a new one by the bank because the old one was soon expiring. So the data associated with the old credit card no longer exist.
i tried to edit my billing info associated with my apple id in order to enter the new credit card data, but the system doesn't allow me to do that.
so i can neither pay my purchase, nor edit my info, nor access app store anymore.
what's next? any ideas? thanksServers down wait till status is fixed to change or add your data http://www.apple.com/support/systemstatus/
-
How do I change the names associated with numbers on my bill
I have multiple numbers on my bill that have the wrong names associated with them. I have tried calling *611 only to wait and then be disconnected. I am the account owner and am unable to locate where to correct the information.
Online, in My Verizon / View Usage / Minutes / Breakdown of Recent Activity / Current Call Log for Line / Select a Line, a log of calls incoming and outgoing since the last billing date are shown. For years, I would be able to click on the blue telephone number and a popup box would show up to Add/Update Nick Name. I would type in a name, for example, Mom and then click on Add/Update and the name would then replace the number in the listing. As of two months ago, I can still do this EXCEPT the name will NOT replace the number! This is so irritating as I have been assning names to the numbers for years for ease of search and identifying the calls. I have call ed Customer Servcie at least htree times on this issue. I have tried to Add/Edit Nick Name in two odfferent browsers (Internet Explorer as well as Firefox) and I have tried it on two dofferent laptops in two diofferent wireless networks. So I know it is NOT an issue with my hardware or networks. The issue is on Verizon's end. I am puzzled that others have not complained. Maybe I am the only doofud that likes to assign names to the numbers? But I would be most grateful if someone within the Community or Verizon's Customer Servcie can resolve this issue once and for all!!!!!!!!!!!!
-
Ipod touch not being recognized by itunes (but is registering as an external drive by the computer itself) have updated and reinstalled itunes, stopped/started apple mobile device and removed any mobile programs associated with my non apple cellphone. This seems to have started happening after the last Itunes update I did as I was able to put music on my ipod touch a month or so ago. Is there some way to go back to an older version of itunes? I really have no idea what else to do since I followed every step on the trouble shooting page for windows 8.
I had this problem too and my roommate solved it!
Go to 'Settings'
'Music'
Scroll to the bottom and enter your password to log onto your home sharing
Then connect to iTunes and sync! -
Hi Lync gurus,
I have a weird issue:
Just installed a Lync Standard 2013.
Everything works except I keep getting this error in Log: every 30 minute or so.
First an Error: Event 47067
A server did not respond to HTTP request
Server lyncserver.domain.local did not respond to HTTP request PublishCertRequest targeted at
https://lyncserver.domain.local:444/LiveServer/UserPinService.
Cause: Server might be down or the network path between servers might not be properly configured.
Resolution:
Please ensure that the server can be connected on the target port using telnet and then re-try.
Then I get a Warning: Event 47068
GetAndPublish web service failed.
Certificate could not be published in the database associated with User Services Cluster [lyncserver.domain.local ]. Request Details - Entity: [[email protected]], Device Id: [6BB30A3E-2923-553A-8E5F-0B2FB2CEA330], Authenticated User: [sip:[email protected]].
Additional Context: [Publish_Failure: OtherFailure;HttpNoResponse:"lyncserver.domain.local "]
Cause: This could be due to network connectivity issues with the remote server, or because the database is down.
Resolution:
Please ensure that the user services is reachable and the database is up and running.
Thanks for any helpPlease check you can telnet port 443 and port 444 on Lync Front End Serve from client.
Try to regenerate a new certificate for Lync Front End Server.
Check all the services on Lync Front End Server are started.
Check the option “Enable all purposes for this certificate” is checked for the trusted root CA certificate.
For the detailed steps:
Run MMC--Add\Remove Snap-ins--certificates--Local Computer--Trusted Root Certificate Authorities--Certificates, find the Root CA certificate you installed--Properties--General, check the "Enable all purposes for this certificate".
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Service Contracts with billing plan not updating debit memo request in ECC
For service contracts with billing plan, we cancel the line items and set the user status at header to "cancelled" and also set the cancellation date (under Cancellation Tab) at the header as well as item level which delete all items in the DMR in ECC (which are not yet billed). When we do this, it works perfect for most of the time and in some cases DMR items are not updated in ECC and it is billing. When I checked in CRM, the billing plan items are updated based on the cancellation date.
Experts appreciate your help on this issue.
Thanks,
George.This is resolved by the note 1008663
-
Getting this error from DirSync
Unable to update this object because the following attributes associated with this object have values that may already be associated with another object in your local directory services: [UserPrincipalName
[email protected];]. Correct or remove the duplicate values in your local directory. Please refer to
http://support.microsoft.com/kb/2647098 for more information on identifying objects with duplicate attribute values.
Quick eyeball and couldn't see the cause in the user account so used the script here:
http://gallery.technet.microsoft.com/office/Fix-Duplicate-User-d92215ef
And got these outputs:
PS C:\Windows\System32\WindowsPowerShell\v1.0> Export-OSCADUserPrincipalName -UserPrincipalName "[email protected]" -Path .\outputs.csv
WARNING: Cannot find objects with specified duplicate user principal name
[email protected]
Found 0 user(s) with duplicate user principal name.
Where to from here?
Richard PHi,
Did you talk about the Microsoft Azure Active Directory Sync tool ?
If yes, this issue occurs if one or more of the following conditions are true:
An object in the on-premises Active Directory has an SMTP address that's the same as the SMTP address of the object that's reporting the problem.
An object in the on-premises Active Directory has a mail attribute that's identical to the object that's reporting the problem.
An object already exists in your organizational account and has the same SMTP address or mail attribute as the object in the on-premises Active Directory
More detail information, please refer to:
http://support.microsoft.com/kb/2520976/en-us
[Troubleshooting] Unable to update this object because the following attributes associated with this object
http://blogs.technet.com/b/aadsyncsupport/archive/2014/05/20/troubleshooting-unable-to-update-this-object-because-the-following-attributes-associated-with-this-object.aspx
Regards.
Vivian Wang -
External service operation with PO associated with it.
hi Gurus,
If a PR - PO is created with reference to external service operation of a maintenance order, then do system allow to delete this operation ? Is it standard SAP practice ?
I have observed in our case that, system is allowing external service operation to delete even though a PO is created with reference to the operation. System only gives a confirmation prompt ( PO is associated with this operation ) , if we select yes then operation gets deleted.
Is it logical when a operation is deleted though a PO is created with ref to it ?
For a non stock item , system does not allow the component to be deleted if a PO is created .
Kindly reply at the earliest.
Thanks
ManeeshHi,
In standard :- System does not allow you to delete external operations & components when PO is there ..
I think in ur system for external operation they might have change the error message IW 707 to warning or no message ..
Check this in config under spro >pm>maintenance and service orders -->message control -->Here for IW -707 , make as Cat -E Error message ..
Then try it up
regrds
pushpa -
HI all.
New install of 2008R2 on HP DL-380 G6. I have created (several) VM's none of which will start. If I remove the IDE Hard Disk and add a DVD of the OS ISO, it will boot and start the install (although with no HDD).
It seems like the IDE controller is working ok - it is what the DVD drive is using, but it cannot mount a VHD. The error indicates a driver is not working (although the DVD on IDE works fine) so something to do with VHD? I can attach the VHD
in disk management, so it does not seem corrupt - again I have tried with both dynamic and fixed VHDs.
Full error is:
'Test1' failed to start. (Virtual machine ID 4320D2D6-DF7E-40D2-BD0F-9562CBB9F052)
'Test1' Microsoft Emulated IDE Controller (Instance ID {83F8638B-8DCA-4152-9EDA-2CA8B33039B4}): Failed to Power on with Error 'The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.' (0x80070422).
(Virtual machine ID 4320D2D6-DF7E-40D2-BD0F-9562CBB9F052)
'Test1': Failed to open attachment 'C:\Users\Public\Documents\Hyper-V\Virtual hard disks\New Virtual Hard Disk.vhd'. Error: 'The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.' (0x80070422).
(Virtual machine ID 4320D2D6-DF7E-40D2-BD0F-9562CBB9F052)
Any Ideas?Hi ,
Did you try to disable the services , if they are exsit :
HP Smart Array SAS/SATAEvent notification
HP Insight storage agents
Then restart your server .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hi guys,
I am struck with a problem while retrieving the Windows Credentials from WCF service.
1. I have used WSHttpBinding.
2. I have configured the Website and App pool to run under a specific user who is an Administrator for the server.
3. I have created the windows Credential of Generic type using Credential manager with the same user.
4. I configured the Website to allow only Anonymous and Windows Authentication in IIS (IIS Version: 8.5).
5. I tried the same code in the same server by logging into server with same user and debug the service. The service is returning the windows Credential requested.
6. But i am unable to retrieve the Windows Credentials from the same code when published in IIS in the same server.
i configure the Security in Server and client as below:
<bindings>
<wsHttpBinding>
<binding name="wsHttpEndpointBinding">
<security mode="Transport" >
<transport clientCredentialType="Windows"/>
</security>
</binding>
</wsHttpBinding>
</bindings>
7. I tried to read the error code generated by Credential Manager API from my code and it returned the below error when i am accessing the deployed service.
ERROR_NOT_FOUND: there is no credentials associated with the given resource name.
8. I have also checked this with other environments out side my virtual machine with the same code and config file. All environments it is working fine except my environment. Can any body help me out on this...Hi pavan kumar,
As per this case, I have shared the details below :
1.where you got stuck & receive error message whether in service side or client side ?
2.if its in service side, then I suggest you to enable tracing on wcf service for debugging purpose to findout the root cause.
3.For configure tracing refer here "https://msdn.microsoft.com/en-us/library/ms733025.aspx"
4.To know about WCF Extensibility – System.Diagnostic Tracing ,then refer the below link
http://blogs.msdn.com/b/carlosfigueira/archive/2011/08/02/wcf-extensibility-system-diagnostic-tracing.aspx
5.If its in Client side, Please make sure that the client is in the same or trust domain as service. -
cancelled debit card associated with my itunes account, recently redeemed a $50 gift card and used about $40 halfway through downloading the purchases a message appeared saying incorrect payment information. I all the purchases can be downloaded for free but it asks me to sign in and i hit the sane wall saying payment information is incorrect. i tried removing cancelled debit card from billing information but i can not find the "none" option when i click edit. any help would be appreciated.
Hey there jappwno,
It sounds like you are unable to select None as a payment method in your iTunes account. The following article may help you determine why this is the case:
Why can’t I select None when I edit my payment information?
http://support.apple.com/kb/ts5366
Thank you for using Apple Support Communities.
Regards,
Sterling
Maybe you are looking for
-
Can I move a game from my ipad to my iphone and maintain the level? Thanks
-
I recently upgrade from Iphotos 09 to 11 and my place assignments are gone. Please help me with this. Also, how can I assing places to pictures in iphotos 11? Thanks. Vishy <Email Edited by Host>
-
What differences where implemented to Oracle 10G Clients ODBC connectivity drivers between 10G Release 1 and Release 2 concerning datatypes? I have an application that performs a qualified read returning a group of records (this is successful) and th
-
Script for inserting 1000 record in a table...
Hello Gurus, I have a table structure like this.... USERID USERNAME USERPWD EMAILID FIRSTNAME LASTNAME ISACTIVE 1 superuser Pyramid123 [email protected] a b 1 21 neha Pyramid123 [email protected]
-
Infopackage loads 0 record in process chain
Hi All, I have scheduled a daily process chain for Purchasing. The infopackage in the process chain loads 0 records and shows green status. But when I load the data manually the infopackage fetchs the record form R/3. Kindly help me on this issue. Re