X86 boot.wim network error 0xe0000101

Hi all,
i used this command to mount, add, commit an dismount about 1200 network drivers to my boot.wim from a windows 7 enterprise cd.
cd C:\install2
dism /mount-wim /wimfile:boot.wim /index:1 /mountdir:mount
Dism /Image:mount /Add-Driver /Driver:Drivers\ /Recurse /ForceUnsigned
dism /unmount-wim /mountdir:mount /commit
dism /mount-wim /wimfile:boot.wim /index:2 /mountdir:mount
Dism /Image:mount /Add-Driver /Driver:Drivers\ /Recurse /ForceUnsigned
dism /unmount-wim /mountdir:mount /commit
pause
After this the size of the boot.wim has grown from 144mb to 172mb, so it looks good.
then i imported the boot.wim to the wds server, and had a clientcomputer boot the image.
when its preparing to load, i get the error :
"WdsClient: An error occurred while starting networking: a matching network card driver was not found in this image. Please have your Administrator add the network driver for this machine to the Windows PE image on the Windows Deployment Services server."
This, While i added 1200 network drivers to the boot.wim ( i made sure that network drivers for my testcomputer are in there)...
So i checked the Setupapi.app.log and it gave me the following failure's:
[Device Install Log]
OS Version = 6.1.7600
Service Pack = 0.0
Suite = 0x0100
ProductType = 1
Architecture = x86
[BeginLog]
[Boot Session: 2014/05/01 15:09:15.484]
! cci: NCI: Failed to read config from registry. hr = 0x80070002
>>> [SetupInstallServicesFromInfSectionEx - MSClient.ndi.Services]
>>> Section start 2014/05/01 15:09:25.172
cmd: X:\Sources\setup.exe
<<< Section end 2014/05/01 15:09:25.172
<<< [Exit status: FAILURE(0xe0000101)]
>>> [SetupInstallServicesFromInfSectionEx - MS_NETBT_SMB.PrimaryInstall.Services]
>>> Section start 2014/05/01 15:09:25.671
cmd: X:\Sources\setup.exe
<<< Section end 2014/05/01 15:09:25.671
<<< [Exit status: FAILURE(0xe0000101)]
Does anyone know, what i did wrong??
i have the X64 boot image working correctly, but i want to be able to install x86 images as well.
Bas

Hi Shaon Shan,
as u can see in the copy of the Setupapi.app.log log, the logfile does not say anything about the Plug
and Play ID (PnPID). If it had an id in there, i wouldnt have this problem.
is there a other way to get the pnpid?
greets
Bas

Similar Messages

Cannot mount winpe boot.wim with error:3

Hi there
thats what i´ve done:
first i installed the adk (build 10057) after i´ve removed the old one completely.
then i´ve used copype to create new files (copype amd64 c:\123)
after this i´ve used this command:
Dism /Mount-Image /ImageFile:c:\123\media\sources\boot.wim /mountdir:c:\123\mount /index:1 /loglevel:4
and i get the error message
Error:3
The system cannot find the path specified.
Here is the Log: http://pastebin.com/djPfKXdN
Whats wrong? Can someone else confirm this?
p.s. i get the same error if i use an different/older wim-file...

Hi,
Currently, we only have latest preview build to 10049 via Windows Update. For the ADK, please make sure to use ADK for Windows Technical Preview
https://msdn.microsoft.com/en-us/library/windows/hardware/dn938390(v=vs.85).aspx
I tested in my mahcine, and the operation completes successfully
The logs shows that something is missing in the dism store, I recommend you uninstall the Deployment tools which contains DISM in ADK, then reinstall the tool as a test.
Regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Network error in boot camp assistant

i can't able to download the windows software and related driver from boot camp assistant, its give me error, "network error",
when i can open every website in my laptop, its coonected to internet....
help me...

manually dl the correct pkg here
http://support.apple.com/kb/ht5634

SCCM 2012 R2 Won't import boot.wim

Over the weekend I have upgraded to SCCM R2 CU4 and today I am having issues with OSD, After the install of the client, the task just ends and does not continue to install the applications.
I checked: drivers, network access account, redistributed all content to DPs still the same issue. After some googleing I found this thread "Failed to get the environment key - SMSTS.log" Sorry not allowed to link yet.
My wim versions are 6.2.9200 so I figured I need to import new boot images, not a big deal.
I have ADK 8.1 Setup up on the server. exported the boot.wim from the adk but whem I attept to import the new boot.wim sccm gives me an error. So back to google. People have stated that MacAfee can cause errors, well we don't run MacAfee, we have
Symantec. For jokes sake I disabled that anyway, but still sccm fails to import the boot.wim, for any user, including the addmin user that was used to install SCCM. As well as from multiple network locations.
Any one have any idea. Any logs I can look at?

I've removed ALL drivers and all packages from SCCM, as well as task sequences pointing to driver packages. Still same issue.
I cannot add or remove drives from boot images. When attempting to add driver to a boot image. the dialog where I select the boot image is just blank and does not list any boot images that are in sccm console.
When attempting to update files on distribution points from the boot images that exist i get this error message.
Error: Boot image to update:
•   Microsoft Windows PE (x86)
Error: Actions to perform:
•   Add ConfigMgr binaries
•   Disable Windows PE command line support
Optional components:
•   Scripting (WinPE-Scripting)
•   Startup (WinPE-SecureStartup)
•   Network (WinPE-WDS-Tools)
•   Scripting (WinPE-WMI)
Error: The wizard detected the following problems when updating the boot image.
•   The SMS Provider reported an error.: ConfigMgr Error Object:
instance of SMS_ExtendedStatus
•   Description = "Failed to insert OSD binaries into the WIM file";
•   ErrorCode = 2152205056;
•   File = "e:\\qfe\\nts\\sms\\siteserver\\sdk_provider\\smsprov\\sspbootimagepackage.cpp";
•   Line = 4716;
•   ObjectInfo = "CSspBootImagePackage::PreRefreshPkgSrcHook";
•   Operation = "ExecMethod";
•   ParameterInfo = "SMS_BootImagePackage.PackageID=\"SPS00004\"";
•   ProviderName = "WinMgmt";
•   StatusCode = 2147749889;
What else is there to try? I am running out of ideas.

Setting up boot WIM... but having trouble setting up the correct NIC driver

I'm trying to setup a network boot with Windows Deployment Services. Pretty straightforward (http://technet.microsoft.com/en-us/library/cc766320.aspx). Problem though is the OOTB Vista & Win2k8 boot.wim file don't include the necessary driver for the NIC card (Intel 82567LM Gigabit NIC). So I'm following these steps outlined here in the MSFT KB (http://support.microsoft.com/kb/923834) but seems I'm not loading the correct driver. I looked in my w500 Vista x64 install that has a working NIC to get the working NIC INF file, but that didn't work. Anyone successfully done this? I'm sure some of the bigger organizations have... just having trouble creating a boot.wim (or modifying the one I've got) to add the correct NIC driver to continue with a PXE boot.
AC
============
ThinkPad w520 | Intel i7 2.5Ghz | 2x 512GB Crucial SSD | 16GB | NVIDIA GeForce Quadro 2000M 2GB | 6.9 Windows Exp Index
Ultrabay DVD + modular Ultrabay 256GB Crucial SSD SATA
Win7 Ultimate x64 | Windows Server 2008 R2 | Win8 Release Preview
ThinkPad x200s | Core2 Duo 1.86 | 256GB Crucial SSD | 4GB | Intel Mobile Chipset Video | 3.4 Windows Exp. Index
Win7 Ultimate x64 | Windows Server 2008 R2

Thanks... I got that far as the boot loader is x86... but I'm trying to figure out which specific INF rather than load all of them as its a manual process.
AC
============
ThinkPad w520 | Intel i7 2.5Ghz | 2x 512GB Crucial SSD | 16GB | NVIDIA GeForce Quadro 2000M 2GB | 6.9 Windows Exp Index
Ultrabay DVD + modular Ultrabay 256GB Crucial SSD SATA
Win7 Ultimate x64 | Windows Server 2008 R2 | Win8 Release Preview
ThinkPad x200s | Core2 Duo 1.86 | 256GB Crucial SSD | 4GB | Intel Mobile Chipset Video | 3.4 Windows Exp. Index
Win7 Ultimate x64 | Windows Server 2008 R2

SCCM 2012 R2 Boot WIM DISM - Drivers Failing -hr:0xc0000135‏

Hello OSD Experts,
I have upgraded my SCCM 2012 RTM to SP1(Not installed any Cumulative updates) then to SCCM 2012 R2 Successfully... I did not get any errors.
Before Upgrade my SCCM 2012 RTM/SP1 Images are removed from DP Targets.
Now my next high priority task is I wanted to integrate my Hardware models NIC & Mass Storage Drivers to my Boot Images, So that my OSD will work without any issues. But am getting errors, when I try
to add by DISM command to the Boot Images.
I have taken Default boot.wim file from SCCM 2012 R2 and copy pasted to my work location and ran the DISM command... however I am not successful in this for integration.
Has anyone have already have solution for this let me know.
<<<AV is in Disabled state during DISM.. Still no Luck>>>
<<<<<I tried to ran the DISM on Windows 8 & Windows 2008 R2>>>>>
Attached my DISM.Log @OneDrive... http://1drv.ms/1gdUi6w
Failed to create Dism Image Session in host. - CDISMManager::LoadImageSession(hr:0xc0000135)
DISM Manager: PID=3200 A problem ocurred loading the image session. Retrying... - CDISMManager::CreateImageSession(hr:0xc0000135)
DISM.EXE: Unable to start the servicing process for the image at 'E:\Boot_WIM\SCCMR2_WIMS\X86\Temp'. HRESULT=C0000135
<<< I have already checked this link but no luck... http://social.technet.microsoft.com/Forums/en-US/6b9facc4-9174-4ae7-a8a0-98d88d7f8a95/dism-error-0xc0000135-when-attemptign-to-add-drivers-to-mounted-2012-image?forum=mdt
>>>
Thank you In Advance,
HunBoy Started learning from this page

Hi,
You could use SCCM console to add these drivers. From the SCCM console, go to Operating Systems -> Drivers. Right click and select Import Drivers and follow the wizard. Or go to Operating Systems -> Boot Images -> Right click the boot image in question
-> select Properties. Select the Drivers tab and click on the add button on the right and then select the NIC drivers.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Thinkpad 10 SCCM 2012 R2 x64 WINPE OSD boot wim

Trying to inject drivers in to my CM12 x64 boot wim (ADK and MDT 2013 integration with CM12) for the new Thinkpad 10 Tablet. The x86 worked flawlessly and touch screen works on the x86 builds even my S1 Yoga. Errors galore with the x64 versions of the drivers from the SCCM pack. Being UEFI boot only both versions are needed and not all my locations will have the dock for using a keyboard so touch just needs to work.
Here is what successfully got added,the 2 display drivers and thats it. I started with all the drivers and worked in reverse by removing each driver after every error.
from SCCM:
Success: Drivers that will be included:
Realtek USB GBE Family Controller
Lenovo USB2.0 Ethernet Adapter
Intel(R) 5 Series 4 Port SATA AHCI Controller
Intel(R) Desktop/Workstation/Server Express Chipset SATA RAID Controller
Intel(R) Desktop/Workstation/Server Express Chipset SATA RAID Controller
Intel(R) C600 Series Chipset SATA AHCI Controller
Realtek USB GBE Family Controller
VMware Pointing Device
VMware USB Pointing Device
VMware PVSCSI Controller
VMware SVGA 3D
VMware VMCI Bus Device
vmxnet3 Ethernet Adapter
Intel(R) HD Graphics
ThinkPad Display 640x480
Realtek USB GBE Family Controller
Any help is appreciated and parkerj, as usual I am willing to be your huckleberry if needed. On a unrelated item any tips for removing the lenovo scup data from my wsus/scup environment? We had an issue and now i cannot publish the data. Whick makes me sad as I think the Lenovo SCUP catalog shows good progress. Primary issue is knowing what applies to what without publishing everything.

Hi,
UEFI BIOS Version: GWET23WW (1.23)
I have managed to implement drivers in a different way. I have created a package containing all drivers and placed it in a part of task sequence running inside installed operating system instead of running in WinPE. There is a script inside a package looking like this:
Start /w .\win\Chipset\setup.exe -s
Start /w pnputil -i -a .\WIN\TXEI\INF\TXEI.inf
Start /w setup.exe -SILENT
Start /w .\WIN\Audio\setup.exe /s
Start /w .\WIN\Bluetooth\setup.exe /s
Start /w .\WIN\Fingerprint\WBF_SPI_DDK_Extended_Setup.exe /s
Start /w .\WIN\GPS\setup.msi /qn
Start /w .\HOTKEY\setup.exe /S /B /H
pnputil -i -a .\WIN\MONITOR\TPLCD.INF
Start /w .\WIN\NFC\setup.exe /s
Start /w .\WIN\PMDriver\setup.exe -S -SMS
Start /w .\WIN\WLAN\setup.exe -s
reg import .\OSFIXES\ALSOR\ALSOR_Apply.reg
For anyone interested just make sure you follow correct paths to executables as presented in this script.
After running it I am left with Security Device unrecognized in Device Manager so I have to add another task sequence for Restart and than another one with a line with a package for Security Device and runing this as a command: pnputil -i -a TXEI.inf
Using regular pre-driver deploy task sequence commands in WinPE enviorenment unfortunately didn't helped so I have ended with workarounds presented here.
If anyone can add something to this I will be more than glad to hear.

Driver Added to Boot.wim but won't recognise on PXE boot

Hi, this is a bit of an odd one.
I have taken the boot.wim file from Windows 7 Pro DVD > Sources folder. I have injected the correct network driver (tested within online image using drvload, I get an IP address), committed this to wim and then added into WDS environment:
Windows Server 2003, WDS not sure what version (how can I find this out)?
I have DOUBLE checked that the .INF file for this driver I have injected is in fact showing in the C:\windows\system32\driverstore etc by mounting wim again and checking the mount folder.
When I PXE boot and select this boot image however, I still receive the 'WDSclient, unable to match network driver' error.
If I hit shift + F10 and manually load the exact same driver from USB, I can again get an IP address afterwards! So I know for a fact I am injecting the correct driver. It's almost as if the setup.exe process isnt loading the driver even though the file
is there.
Any ideas?
Thanks

Solved! Well, using a workaround.
Installed WDS on one of our Windows 2008 servers so I had the additional options within WDS to add driver packages etc. Added driver this way then exported the image and imported into the original WDS server. Works fine.
Can't just switch to using the 2008 server full time currently as I'm on a tight deadline to roll an image out and the network has many vlans, I'd have to change config to allow traffic from our build network VLAN environment to new WDS server etc.

Boot.wim load only cmd

Dear,
i have sccm 2012 sp1, with McAfee VS8.8, after i finished the installation of the SCCM the default boot image was not exist,
however i disabled the mcafee and added x86 and x64 boot with no error,
the issue when i boot from pxe i get the image and windows start in winpe environment with cmd window, instead of opening SCCM task sequence choose wizard.
does any one have any idea of what is the issue?
the boot.wim already have (winpe-scripting, winpe-securestartup, winpe-wds-tools, winpe-wmi ).

Recreate the boot images:
http://blogs.technet.com/b/systemcenterpfe/archive/2013/01/11/updated-system-center-2012-configuration-manager-antivirus-exclusions-with-more-details.aspx and
https://kc.mcafee.com/corporate/index?page=content&id=KB76867&actp=search&viewlocale=en_US&searchid=1357907921573
Torsten Meringer | http://www.mssccmfaq.de

Software update - networking error (Mac OS 10.4.11)

Hi everyone,
I've been having problems running software update on my 867 MHz Powerbook G4. Every time I try to run software update, I get the same message: "A networking error has occurred: timed out (-1001). Make sure you can connect to the Internet, then try again."
I'm using Mac OS X 10.4.11.
My network is running fine, and I've run Network Diagnostics several times fully through to confirm this.
I've tried repairing the disk permissions through disk utility a few times, and nothing's changed.
I tried copying three files from my Library / Preferences folder, along with my Caches folder (after reading that this could fix the problem), but still, software update doesn't work.
I tried running the 10.4.11 combo update for PPC, rebooted in safe mode, and repaired my disk permissions again, but still, no luck.
There's another problem that might be related: Safari can't load pages. Firefox 2.0.0.18 works fine, but Safari doesn't do anything. Also, closing the Safari window (Ctrl + W) doesn't work, quitting the program is the only way to make it go away.
Thanks in advance for the help, it's much appreciated!

Hi James, and a warm welcome to the forums!
To expand a bit on Sig's great advice...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
Also, how much free space do you have on your HDD?

My iOs 5 update gets all the way to the end then says there is a network error? How do I fix this?

I plug my iPod touch (4th generation) in to iTunes and then say yes to update to iOs 5. The download begins, takes about half an hour, then a message pops up saying there is a network error and for me to check my network. My internet is working just fine, iTunes just fine, and iPod just fine. I don't know how to fix this. I have tried dowloading iOs 5 about 5 or 6 times and this happens every single time.

Try a manual install, as outlined in the link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

I get a network error that pops up that says model_ERROR_BIND and tells me to check the network settings. But all is working fine. Any ideas what to do to fix this error.

I get a pop message that says there is a network error. The message is MODEL_ERROR_BIND. Please help. The network seems to be working fine.

You have some other problem with your boot drive that has corrupted data backed up to the TimeMacine drive.
My advice is to boot into each operating system and manually backup just your Users files each to separate regular external drives (no Timemachine or backup software) and disconnect.
Make a note of any serial numbers, emails, address book contacts, export bookmarks etc. that isn't typically in your users folders data.
You might be able to Winclone 3 the Windows as a whole thing as it's appearing not to have issues but it's your MacintoshHD partition that is so that will have to be rebuilt from scratch.
Most commonly used backup methods
If your OS X parititon doesn't boot, you can use this to recover files.
Create a data recovery/undelete external boot drive
Without any further detail about your machine I can't advise specifically what to do, but it involves using Disk Utility to Zero Erase (move slider one spot to the right or in 10.6 using Security Option) the ENTIRE boot drive and reformatting, then installing OSX fresh and then setting up BootCamp again.
If you wish to switch your boot drive for something better, this is a good time to do this.
Install/upgrade RAM or storage drive in Mac's
If your machine is capable of Internet Recovery, then use that, then upgrade.
If your machine came with 10.6 or earlier, then use the 10.6 install disks and work up from there.
Erase, formatting, OS X installs on Mac's

The source folder must contain a valid boot.wim file

Hi.
I have the following problem
I have downloaded MDOP2014 (en_microsoft_desktop_optimization_pack_2014_x86_x64_dvd_4130158)
I have installed the Windows Assessment and Deployment Kit (Windows ADK) for Windows 8.1 Update
And then installed MSDaRT81.exe on a Windows 8.1 (with Update) machine
I have also copied the boot.wim from the "Sources" folder from the Win8.1 ISO file.
But when I start the DaRT Recovery Image Wizard an try to point to the folder with the boot.wim file, it gives me:
"The source folder must contain a valid boot.wim file"
I have tried boot.wim files from 8.1 ent, 8.1 ent with update, server 2012 R2, server 2012 R2 with update...no go
I am using boot.wim of win 7.
Any ideas????

Hi,
I found that if you point to the root directory (not the sources folder), then it finds the correct boot.wim. Specifically, I downloaded the 8.1 Enterprise evaluation ISO, then mounted the ISO (F:). When pointing to the sources folder, it gave the same error,
but when I pointed only to F:, it worked fine.
Additionally, both in the wizard and in the article 'Creating the DaRT 8.0 Recovery Image', it states:
Specify the root path of the Windows 8 <64-bit or 32-bit> install media
Hope this helps,
David
MDOP on the Springboard Series on TechNet

I keep getting network error on Facebook on my iPad

My Facebook was working fine on my Wi Fi but in the last week I keep getting network error when trying to logon to Facebook from my iPad & iphone 5s. I have time warner road runner digital cable. How do I fix it?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Why do i get network error when trying to connect to sirius xm

My Ipad displays "Network Error" each time I try to start my Sirius XM mobil app. The app works correctly on all my other devices (lap top, smart phone, desk top). Ipad OS5.1 is up to date!
Anyone have any ideas??

Usually it's because you are not making internet connection via wifi.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

X86 boot.wim network error 0xe0000101

Similar Messages

Maybe you are looking for