X86 Solaris 10 problems with ipfilter

Colleagues,
I'm install Solaris 10 on HP Proliant DL360 G4
(listed in HCL for Solaris OS http://www.sun.com/bigadmin/hcl/data/sol/systems/details/691.html)
Everything works fine till, but when I increase loading
(DNS server there, so too much UDP packets, about 2000/sec) Solaris panic with:
Nov 30 10:35:45 d0 ^Mpanic[cpu0]/thread=ffffffff85759820:
Nov 30 10:35:45 d0 genunix: [ID 103648 kern.notice] mutex_exit: not owner, lp=0 owner=0 thread=ffffffff85759820
Nov 30 10:35:46 d0 unix: [ID 100000 kern.notice]
Nov 30 10:35:46 d0 genunix: [ID 655072 kern.notice] fffffe8000c08190 unix:mutex_panic+6f (0, ffffffff860f5d98, fffffe)
Nov 30 10:35:46 d0 genunix: [ID 655072 kern.notice] fffffe8000c081b0 unix:mutex_vector_exit+39 ()
Nov 30 10:35:46 d0 genunix: [ID 655072 kern.notice] fffffe8000c081e0 ipf:ipf_stinsert+333e9215 ()
Nov 30 10:35:46 d0 genunix: [ID 655072 kern.notice] fffffe8000c08210 ipf:fr_updatestate+61 ()
Nov 30 10:35:46 d0 genunix: [ID 655072 kern.notice] fffffe8000c08250 ipf:fr_checkstate+10f ()
Nov 30 10:35:46 d0 genunix: [ID 655072 kern.notice] fffffe8000c08390 ipf:fr_check+629 ()
Nov 30 10:35:46 d0 genunix: [ID 655072 kern.notice] fffffe8000c08530 pfil:pfil_precheck+850 ()
Nov 30 10:35:46 d0 genunix: [ID 655072 kern.notice] fffffe8000c08560 pfil:pfilmodwput+9f ()
Nov 30 10:35:46 d0 genunix: [ID 655072 kern.notice] fffffe8000c085c0 unix:putnext+1f1 ()
Nov 30 10:35:46 d0 genunix: [ID 655072 kern.notice] fffffe8000c086d0 ip:ip_wput_ire+1a98 ()
Nov 30 10:35:46 d0 genunix: [ID 655072 kern.notice] fffffe8000c08780 ip:ip_output+ee9 ()
Nov 30 10:35:46 d0 genunix: [ID 655072 kern.notice] fffffe8000c08790 ip:ip_wput+18 ()
Nov 30 10:35:46 d0 genunix: [ID 655072 kern.notice] fffffe8000c087f0 unix:putnext+1f1 ()
Nov 30 10:35:46 d0 genunix: [ID 655072 kern.notice] fffffe8000c08870 udp:udp_wput+29d ()
Nov 30 10:35:46 d0 genunix: [ID 655072 kern.notice] fffffe8000c088d0 unix:putnext+1f1 ()
Nov 30 10:35:46 d0 genunix: [ID 655072 kern.notice] fffffe8000c08a70 genunix:strput+3bc ()
Nov 30 10:35:46 d0 genunix: [ID 655072 kern.notice] fffffe8000c08af0 genunix:kstrputmsg+1e8 ()
Nov 30 10:35:46 d0 genunix: [ID 655072 kern.notice] fffffe8000c08ba0 sockfs:sosend_dgram+181 ()
Nov 30 10:35:46 d0 genunix: [ID 655072 kern.notice] fffffe8000c08c10 sockfs:sotpi_sendmsg+1bc ()
Nov 30 10:35:46 d0 genunix: [ID 655072 kern.notice] fffffe8000c08c80 sockfs:sendit+f0 ()
Nov 30 10:35:46 d0 genunix: [ID 655072 kern.notice] fffffe8000c08ed0 sockfs:sendmsg+1bf ()
Nov 30 10:35:47 d0 unix: [ID 100000 kern.notice]
Nov 30 10:35:47 d0 genunix: [ID 672855 kern.notice] syncing file systems...
Nov 30 10:35:47 d0 genunix: [ID 733762 kern.notice] 34
Nov 30 10:35:48 d0 genunix: [ID 733762 kern.notice] 24
Nov 30 10:36:08 d0 last message repeated 20 times
Nov 30 10:36:09 d0 genunix: [ID 622722 kern.notice] done (not all i/o completed)
Nov 30 10:37:30 d0 genunix: [ID 540533 kern.notice] ^MSunOS Release 5.10 Version Generic_118844-20 64-bit
Nov 30 10:37:30 d0 genunix: [ID 943906 kern.notice] Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved.
At some stage there are problems with creation of a new state...
I remember some time ago (Solaris 2.8) there where problems like that with ipfilter, but now ipfilter included in Solaris distribution, hardware tested and so on...
New reincarnation of a problem?
Somebody has similar problems with the software x86 Solaris 10?
Thanks, Roman Gnatenko (rvg at co.ru)

Hi. I've never seen anything like this, and it seems to be something which
the JDBC module is going to be an innocent victim of, rather than a
contributor to... Your best course is to open an official support case.
Joe

Similar Messages

Dual boot (x86) Solaris 9 with Win Xp/ NT

Hello!
I wanted to have Solaris as well as any other OS. The problem is that according to the mutliboot guide provided by SUN, first I install Win Xp, and then Solaris. But during the installation, Solaris demands the entire disk to be used, while I go for the "default disk layout". I can't figure out how to specify a particular amount of disk space for solaris through FDISK. Maybe, i don;t know the layout to be followed. This is because if I make a solaris partition, it does not install on it....

Well I run WindowsXP and Solaris on the same box.
Cant understand whats the problem with it, so let me just describe the way I did it. (btw installation guid was not so helpful)
So at the point when you have to choose HD to install at, I think question before it was what sort of installation type you want (Default or Custom) Default will just use hole HD, while Custom will ask extra questions, conserning HD, partitions and so on. Just choose the right one, make sure that you devide space for Solaris in a way you need it rather then what just stands there (like more space for OS rather then private space and so on..)
Then finish install and thats it.
Hope it will help.

Problem with Jumpstart install

Hi,
I'm having a serious problem installing an x86 Solaris 10 with Jumpstart. I have a server with the profiles and rules, everything is ok I think. The server has a DCHP service running, and I start the target machine from the net. When switched on, it connects to server, get IP address and paramenters, and the Grub menu appears with the correct option to select. I select it and the process begin. First, the language selection page asks for the language, then, the process make the partitions, and start the copy of files (graphic mode). After some hours (the files are the Solaris 10 operative system itself and a flash image from other machine), the file copy process finishes, and, after some other tasks, the machine reboots. And here is where the problem appears.
At booting, I select to boot from the first hard disk drive (where the files have been copied, where the OS resides), and the following message appears: Bad PBR sig. Searching in forums, I have read that message means there is no active partition or it's impossible to find the master boot record.
Booting with a CD, I see there is an active partition, and it is the correct partition. So the problem is that there is no master boot record. Again, searching the net, I read that there are two ways of write a MBR: the command Installboot and the command Installgrub.
I boot from solaris 10 CD and enter the command Installboot, and it says that it's obsolete, so I try with Install grub this way: (note: when booting with Solaris CD, it detects a Solaris installed in /dev/rdsk/c0t0d0s0, and ask me if I want to mount it in /a, I answer yes because I think that I need to use the information of grub at /boot/grub of the hard disk)
installgrub -m /a/boot/grub/stage1 /a/boot/grub/stage2 /dev/rdsk/c0t0d0s0
After that, I rebooted the machine and when it starts (from hard disk), the only thing that occurs is that the word GRUB appears.. and nothing else. A flashing cursor at the end of the word GRUB. Nothing to do. The only way to get out of there, is switching off and then on again.
The first time I tried to install, I did the same but without mounting the disk, and with the command installgrub -m /boot/grub/stage1 /boot/grub/stage2 /dev/rdsk/c0t0d0s0
Here is the profile at Jumpstart:
install_type flash_install
archive_location nfs 10.95.8.7:/export/backup/platform/alba-ucm/ALBA-UCM-HostID_
2b72c461_4x80GbMirror-Prepared_09042008.flar
partitioning explicit
#DISK-0 MIRROR PREPARED
filesys c0t0d0s0 1:2650 /
filesys c0t0d0s1 2651:1600 /var
filesys c0t0d0s2 4251:400 swap
filesys c0t0d0s3 4651:100 /tmp
filesys c0t0d0s4 4751:1000 /opt/app
filesys c0t0d0s5 5751:3143 /repositoryCC
#SVM+Boot
filesys c0t0d0s7 8894:26
#DISK-1 MIRROR PREPARED
filesys c0t1d0s0 1:2650
filesys c0t1d0s1 2651:1600
filesys c0t1d0s2 4251:400
filesys c0t1d0s3 4651:100
filesys c0t1d0s4 4751:1000
filesys c0t1d0s5 5751:3143
#SVM+Boot
filesys c0t1d0s7 8894:26
#DISK-2 MIRROR PREPARED
filesys c0t2d0s0 1:8093 /datos
filesys c0t2d0s1 8094:800 /DBoracle
#SVM+Boot
filesys c0t2d0s7 8894:26
Please, need some urgent help to solve this problem. What am I doing wrong?
Thanks.

Paco,
Quizas deberias de tratar de instalar tus file systems, y sincronizarlos durante el jumpstart. In other words, you should try to mirror your drives during jumpstart. I see you are using cylinders instead of MB sizes, and unless there is a particular reason why you're doing it that way, I suggest you mirror like this:
filesys mirror:d10 c0t0d0s0 c0t1d0s0 /
filesys mirror:d20 c0t0d0s1 c0t1d0s1 /swap
de este modo, una vez el sistema operativo instale, los cambios necesarios al bootenv.rc seran implementados por el sistema operativo.
You should also make sure if you have a live system, that the secondary drive (DRIVE-1) you are trying to boot has been setup with the master boot record:
fdisk -B /dev/rdsk/c0t1d0p0
And make sure your /boot/solaris/bootenv.rc file shows an "alternateboot" property.
Saludos,
--xancatal

Several mysterious problems with Solaris 11 x86 install

Hi folks,
I've recently installed Solaris 11 x86 as a replacement for Solaris 9 SPARC on an Ultra 2 machine. I like the operating system, but I've promptly acquired some mysterious problems. The computer is a Fujitsu Siemens Esprimo E2500 with a Pentium 4 HT 3.06 GHz processor, 2 GB RAM, an 80 GB SATA disk and a 147 GB SCSI disk.
I have had a few occasions on which the screen goes totally blank, the monitor claims that there is no signal, and I have to restart the machine. However, with the blank screen, the hard drive activity light is sometimes still flashing. This happens predictably when I try to log off (as opposed to shutting down) and when I use Totem media player and click on anything inside the Totem window. The motherboard has built-in graphics and brief specifications can be found here:
http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/professionalpc/ESPRIMO/Datasheets/ds_esprimo_edition_e2500.pdf
Yesterday my PS/2 keyboard started causing the motherboard to beep crazily when I use it. It beeps rapidly 4 times, then prints the expected character. However, the problem doesn't occur at the initial log in screen. The mouse cursor has also gone beserk on one occasion, flying all over the screen (I had this problem with a previous PC, but a different OS, and thought it was a hardware fault, which I why I got this new computer). With the keyboard problem, the machine is basically unusable. However, it is configured as a dual boot machine, and the keyboard problem isn't present with Windows XP.
There are also a few smaller, odd problems. Occasionally all the icons vanish from my Gnome desktop. The command prompt also mysteriously changed from $chris@pluto to $bash-4.1 just before the keyboard problem appeared, although that might have had something to do with me copying my home directory to a different disk and editing the /etc/auto_home file (moving the home directory worked fine). Also, unlike with Solaris 9 SPARC, I find that I have to have external SCSI devices switched on at boot time, should I want to use them later. That's a pain. With Solaris 9, I could run "boot -r" when I first attached the device, then switch on the SCSI devices and mount them whenever I wanted.
After the useful advice I received here about "more" and "less", I thought I'd post these problems and see if anyone can help. I'd really appreciate some advice. Can anyone identify likely causes for these problems? Which problems can I expect to solve and which do I have to live with?
Many thanks,
Chris Tidy
Edited by: Chris Tidy on 23-Mar-2012 03:36

Hi folks,
I've recently installed Solaris 11 x86 as a replacement for Solaris 9 SPARC on an Ultra 2 machine. I like the operating system, but I've promptly acquired some mysterious problems. The computer is a Fujitsu Siemens Esprimo E2500 with a Pentium 4 HT 3.06 GHz processor, 2 GB RAM, an 80 GB SATA disk and a 147 GB SCSI disk.
I have had a few occasions on which the screen goes totally blank, the monitor claims that there is no signal, and I have to restart the machine. However, with the blank screen, the hard drive activity light is sometimes still flashing. This happens predictably when I try to log off (as opposed to shutting down) and when I use Totem media player and click on anything inside the Totem window. The motherboard has built-in graphics and brief specifications can be found here:
http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/professionalpc/ESPRIMO/Datasheets/ds_esprimo_edition_e2500.pdf
Yesterday my PS/2 keyboard started causing the motherboard to beep crazily when I use it. It beeps rapidly 4 times, then prints the expected character. However, the problem doesn't occur at the initial log in screen. The mouse cursor has also gone beserk on one occasion, flying all over the screen (I had this problem with a previous PC, but a different OS, and thought it was a hardware fault, which I why I got this new computer). With the keyboard problem, the machine is basically unusable. However, it is configured as a dual boot machine, and the keyboard problem isn't present with Windows XP.
There are also a few smaller, odd problems. Occasionally all the icons vanish from my Gnome desktop. The command prompt also mysteriously changed from $chris@pluto to $bash-4.1 just before the keyboard problem appeared, although that might have had something to do with me copying my home directory to a different disk and editing the /etc/auto_home file (moving the home directory worked fine). Also, unlike with Solaris 9 SPARC, I find that I have to have external SCSI devices switched on at boot time, should I want to use them later. That's a pain. With Solaris 9, I could run "boot -r" when I first attached the device, then switch on the SCSI devices and mount them whenever I wanted.
After the useful advice I received here about "more" and "less", I thought I'd post these problems and see if anyone can help. I'd really appreciate some advice. Can anyone identify likely causes for these problems? Which problems can I expect to solve and which do I have to live with?
Many thanks,
Chris Tidy
Edited by: Chris Tidy on 23-Mar-2012 03:36

Solaris 10 problem with installtion

I have problem with installtion Solaris 10 Early Access Software x86 Platform Edition.
I downloaded all images, and burned it.
When I try boot from first CD i see screen with primary boot subsystem
and computer it's frozen.
Solaris text at screen is changed to Aolaris.
that all what it's happen.
My computer hardware:
Intel 2,8 Prescot ( 1 MB cache ) HT
512 RAM
200 GB HardDrive SATA
Mainboard GIGABYTE 8S655TX Ultra ( chipset SIS 655TX )
Graphic Card Nvidia Geforce 5200 128 MB
Anybody know what is wrong ?

I cheked and evrythink ok at other computer.
Maybe is somthing with BIOS setting
( I have USB keyboard ) but i don't think that is problem
best regards
Marcin

Backup problem with LMS 3.0 on Solaris

Hi All,
I'm encountering problems with LMS 3.0 when I try to do a backup. After you hit OK on the window that says "Do you want to backup now?", an error would pop up saying: "Enter a new directory name or ask the system administrator of the Ciscoworks Common Services server to make the directory accessible to user casuser", thus I cannot proceed with the backup process. When I do backup, my login privilege is admin. Even tried to do backup on the same partition as my CSCOpx directory but to no avail.
Appreciate your help on this guys. Our LMS 3.0 runs on Solaris platform. Thanks in advance.

Hi Joe,
Thanks for your prompt response. By the way, what is a casuser? Is he also one of the user that can be found on the Local User Setup on Common Services? The scenario here is that, I am not the one who installed the Ciscoworks LMS 3.0 on the client side, so I am not aware on how they did the installation procedure for the application. I remember assigning casuser password during installation on our other clients that has LMS 3.0.
Will the write access on the backup directory for the casuser be done by the Solaris root administrator?
Thanks for your help.

Installation problems with Solaris 8 on Intel

Howdy,
I am having some problem with my installation of Solaris 8 on Intel. I am installing the system on a P133 (Asus TX97 motherboard). When I first start the installation and perform the system scan I get the following error:
The PnP ISA: IDE Controller programable device was unable to be programmed.
This could be caused by two possible reasons:
- Lack of resouces available
- There is a conflict with the following already-existing device: 8086,7111 - Bus Mastering IDE Controller
When I bring up the View/Edit device settings and I scroll to the IDE controller there is an ! mark beside the PCI IDE controller. The controler is specifying: Bus 0, device: 1, function: 1 port 1F0-1F7, 3F6, 170-177, 376, E000-E00F, 0 IRQ 14, 15
Does anyone have any suggestions on how to resolve this conflict? I tried removing the PCI IDE interface and then installing a ISA IDE interfact (for IRQ: 14, IRQ 15 automatically put a PnP IDE controller there). This seemed to resolve the conflict but then I received a: No Bootable devices have been found.
If anyone can help out with how to resolve the conflict, or what the No Bootable Devices have been found error it would be greatly appreciated.
Currently there is a partition set up with NT on it, but I wish to basically get rid of everything on the HD and install Solaris on it. FYI, when I check the HD's in NT it mentions I/0: 1F0-1F7 IRQ 14 and also I/O 170-177 IRQ 15.
Any help would greatly be appreciated.
Regards,
S.

When I close down Solais in the CDE I am taken back to the logon screen
and I turn the PC off.Don't do that. If you simply turn off the PC, the OS has no chance to
write back cached / modified disk data back to the HDD - this is also the
reason why solaris has to check the filesystems on the next boot and apparently
has to repair filesystem defects.
What you have to do is shutdown the machine, before you can power it off.
Login as user "root" and use the command
init 5
or
halt
"init 5" will shutdown system services, by executing commands from
/etc/rc0.d/K* with argument "stop". Then it'll sync all modified disk blocks to
the HDD, kills all remaining processes and unmounts all filesystems. In this
state it's safe to power off the machine!
"halt" is a quick-and-dirty shutdown. It does not stop system services (the
/etc/rc0.d/K* commands are not run). But, it syncs all modified disk blocks
to the HDD, kills all processes and unmounts all filesystems. "init 5" is preferred,
especially if you have services like a database server running on the machine,
which needs to be cleanly shutdown. On the other hand, with a default solaris
installation and no extra services, a simple "halt" should be OK.
Btw. if multiple users are logged in on the machine, you should also have a look
at the shutdown(1M) command. "shutdown" sends warnings to the logged in
users that the machine is about to be shut down, ...

Problem with application directories on JDS - Solaris 10 11/06 sparc

I am running a fully patched JDS on a Sun Blade with Solaris 10 11/06 sparc.
After installing, removing, and re-installing Sun Download Manager 2.0 (web start version) I am having problems with JDS application menus.
I used File Manager (probably accessed through the This Computer Desktop icon) to move around directories under applications:///. This information is saved in ~/.gnome2/vfolders. Folders available from the Launch menu under Applications were all messed up, but I solved this problem by removing all contents of ~/.gnome2/vfolders and restarting JDS.
Now, when I enter the This Computer icon on the Desktop, and click on the Applications icon in there, there is an extra Applications icon there that is not associated with any application and cannot be removed (when I try and trash it, I get an error saying something about "not on same file system"). Also, when I enter the Internet folder under Applications, there is an extra Internet icon in there that also cannot be removed. These extra folders are not seen when accessing the Applications menu from the Launch menu. How can I clean up these "bad" launchers, or folders, or whatever they are, that appear to exist only under the Applications directory accessible through This Computer (computer:///)?
Thank you...

Maybe the answer is here:
http://docs.sun.com/app/docs/doc/819-0918/6n3aglfdl?l=en&a=view&q=location+of+applications-all-users
To Add a Menu Using Menu Files
To add a menu for all users, perform the following steps:
1. Create a directory entry file for the item that you want to add. Create the directory entry file in the /usr/share/gnome/vfolders directory. For more information about directory entry files, see Directory Entry Files.
2. Locate the vfolder information file for the location where you want to add the menu. For example, to add a menu to the Applications menu, locate the file /etc/gnome-vfs-2.0/vfolders/applications-all-users.vfolder-info.
3. In the vfolder information file, add a <Folder> element for the new menu. For more information about vfolder information files, see Vfolders and Menus.
The next time users log in, the menu is in the assigned location.

Problem with JNI in a Solaris shared library

Hi,
I have a problem.
I have used JNI in my .dll on Windows & .so on Solaris . I have also used the same JNI code in a .exe on Windows & an executable on Solaris. 3 out of the above 4 combinations work & 1 doesen't. When I use JNI from a .so on Solaris 8(with/without the J2SE recommended patch), the JVM seems to have some exception & dumps core when I invoke CreateJavaVM(). See Below - I've included the output on the screen & the output from 'pstack core' :
Unexpected Signal : 11 occurred at PC=0xFED29D44
Function=[Unknown. Nearest: JVM_GetMethodIxExceptionIndexes+0x1994]
Library=/usr/java/jre/lib/sparc/libjvm.so
Current Java thread:
Dynamic libraries:
0x10000 SblSim
0xff280000 /usr/lib/libnsl.so.1
0xfec00000 /usr/java/jre/lib/sparc/libjvm.so
0xff370000 /usr/lib/libpthread.so.1
0xff350000 /usr/lib/librt.so.1
0xff260000 /usr/lib/libsocket.so.1
0xff390000 /usr/lib/libdl.so.1
0xff230000 /usr/lib/libCrun.so.1
0xff200000 /usr/lib/libm.so.1
0xff340000 /usr/lib/libw.so.1
0xff1b0000 /usr/lib/libthread.so.1
0xff080000 /usr/lib/libc.so.1
0xff180000 /usr/lib/libmp.so.2
0xff160000 /usr/lib/libaio.so.1
0xff1f0000 /usr/platform/SUNW,Sun-Blade-1000/lib/libc_psr.so.1
0xfebd0000 /usr/j2se/jre/lib/sparc/native_threads/libhpi.so
0xfeba0000 /usr/j2se/jre/lib/sparc/libverify.so
0xfeb60000 /usr/j2se/jre/lib/sparc/libjava.so
0xfeb40000 /usr/j2se/jre/lib/sparc/libzip.so
0xfe920000 /usr/lib/locale/en_US.ISO8859-1/en_US.ISO8859-1.so.2
0xf1400000 ./libaicd.so
0xfc480000 ./libmttoolkit.so
0xfdfe0000 ./libmttlogger.so
0xfdfb0000 /usr/j2se/jre/lib/sparc/libnet.so
Local Time = Tue Nov 12 09:51:37 2002
Elapsed Time = 29
# HotSpot Virtual Machine Error : 11
# Error ID : 4F530E43505002D5 01
# Please report this error at
# http://java.sun.com/cgi-bin/bugreport.cgi
# Java VM: Java HotSpot(TM) Client VM (1.4.0_01-b03 mixed mode)
# An error report file has been saved as hs_err_pid3120.log.
# Please refer to the file for further information.
Abort(coredump)
Below is the output of 'pstack core'
$ pstack core
core 'core' of 3120: SblSim libaicd.so 127.0.0.1 9999
----------------- lwp# 1 / thread# 1 --------------------
ff1c9764 __sigprocmask (ff1cbf60, 0, 0, 565f8, ff1de000, 0) + 8
ff1be110 _sigon   (565f8, ff1e5930, 6, ffbedba4, 565f8, 6) + d0
ff1c1150 thrpkill (0, 1, 6, ff1de000, 1, ff140450) + f8
ff0cb900 raise (6, 0, 0, ffffffff, ff1403bc, 4) + 40
ff0b58ec abort (ff13c000, ffbedcf8, 0, fffffff8, 4, ffbedd19) + 100
feee2700 ???????? (1, fef98e50, ffbedd98, 0, feffc130, feee1258)
feee12c8 ???????? (60650, b, fed29d44, ffbeeab8, b, 0)
fede77c0 ???????? (fed29d44, ffbeeab8, ffbee800, fed29d44, fed03744, 0)
ff1cb824 __sighndlr (b, ffbeeab8, ffbee800, fede6f38, 5669c, 5668c) + c
ff1c84d8 sigacthandler (b, 565f8, 0, 0, 0, ff1de000) + 708
--- called from signal handler with signal 11 (SIGSEGV) ---
fed29d44 ???????? (0, 60650, 0, 0, 0, 0)
fed2d7d4 ???????? (606e4, 0, 0, ffbeed00, 0, 0)
f172e818 __1cHJNIEnv_JNewObject6MpnH_jclass_pnK_jmethodID_E_pnI_jobject__ (606e4, 0, 0, ffbeed70, 39, 107f90) + 70
f172dbf8 __1cGJEvent2t5B6M_v_ (107f60, f1a877f4, db088, ff0c1c44, 107f48, 0) + 80
f16f2864 __1cGCEvent2t6Mii_v_ (107f60, 0, 1, ff13c000, 107f48, 0) + 7c
f16e62e8 __1cVCISCHelperThreadMutex2t6M_v_ (107f50, 0, 560ac, 30f68, fefe4000, 0) + c0
f16ddc34 __1cLinitGlobals6F_v_ (0, 1, 19a, f1a198ec, f1a198ec, 0) + 5c
f16de4e4 CreateISCDriverInstance (0, 5cc40, 0, 57608, 565e8, 0) + 554
00034f08 __1cJRunSblSim6F_v_ (1, ffbef322, ffbef32c, ff13fc70, 100d4, 0) + 320
00035588 main (4, ffbef1dc, ffbef1f0, 55c00, 0, 0) + 1a8
00018460 _start   (0, 0, 0, 0, 0, 0) + 108
----------------- lwp# 2 / thread# 2 --------------------
ff11e958 _signotifywait (ff1de000, 59, 0, 0, 0, 0) + 8
ff1c2030 thr_yield (0, 0, 0, 0, 0, 0) + 8c
----------------- lwp# 3 --------------------------------
ff1c9774 private___lwp_cond_wait (ff075d70, ff1ded9c, ff1de000, 0, 0, 4) + 8
ff11c554 doorreturn (ff075cb0, ff1ba740, 0, 0, 0, 0) + 68
----------------- lwp# 4 / thread# 4 --------------------
ff11efbc ___lwp_cond_wait (60048, 60030, fe901ad0, 0, 0, fe901ac8) + 8
ff116610 lwpcond_timedwait (1cb8c88, 3dd1157a, fe901ba4, 60030, 60048, 1) + 98
fecfc7d8 ???????? (0, 1, 0, 581b8, feffa26c, 0)
fecfcfd4 ???????? (ff00a15c, feffa4b8, feffa4b4, 0, 0, 0)
fecfccc0 ???????? (d3980, 0, 0, 0, 0, 0)
fecfcbd0 ???????? (d3980, ff1df688, 1, 1, ff1de000, 0)
ff1cb728 threadstart (d3980, 0, 0, 0, 0, 0) + 40
----------------- lwp# 5 --------------------------------
ff11c4fc doorreturn (4, ff1df688, ff1df6a0, 3, ff1de000, 1) + 10
ff1ba740 lwpstart (fea95d70, 0, 6000, ff075b74, 0, 0) + 18
ff1c2030 thr_yield (0, 0, 0, 0, 0, 0) + 8c
----------------- lwp# 6 / thread# 5 --------------------
ff11efbc ___lwp_cond_wait (d5720, d5708, 0, fed10a40, 0, 0) + 8
fed110d4 ???????? (d56c8, 0, 5000, 5210, d4d38, 4d24)
fed10824 ???????? (fdf8172c, 0, 0, d4d38, d4d38, 30dec8)
fed103b0 ???????? (d4dcc, fdf81824, 0, 0, 0, 0)
fa40cc94 ???????? (f2000380, b6, fdf818a4, ffffffff, 0, fdf817c0)
fa405da0 ???????? (f2000380, b6, fdf818a8, fa415444, 0, fdf81840)
fa405da0 ???????? (fdf81938, 0, 0, fa4157a4, 2f4210, fdf818d8)
fa400438 ???????? (fdf819c0, fdf81c08, a, f6050b68, fa40bc8c, fdf81b50)
fecfe2f8 ???????? (fdf81c00, fdf81a88, fdf81b48, d4d38, d4d38, fdf81a9c)
fed0ff90 ???????? (fefe4000, d5298, fdf81b3c, fdf81b38, fdf81b48, d4d38)
fed0fdf0 ???????? (fdf81c00, fdf81bfc, fdf81bf0, fdf81be8, fdf81be0, d4d38)
fed0fd78 ???????? (d4d38, d4d38, ac9a0, d5298, 2d4488, fed0fa60)
fed0fa88 ???????? (d4d38, 0, 0, 0, 0, 0)
fecfcbd0 ???????? (d4d38, ff1df688, 1, 1, ff1de000, 0)
ff1cb728 threadstart (d4d38, 0, 0, 0, 0, 0) + 40
----------------- lwp# 7 / thread# 6 --------------------
ff11efbc ___lwp_cond_wait (d7040, d7028, 0, 1, 0, 0) + 8
fed110d4 ???????? (d6fe8, 0, 5000, 5210, d6658, 4d24)
fed10824 ???????? (fa38169c, 0, 0, d6658, d6658, 30dec8)
fed103b0 ???????? (d66ec, fa38179c, 0, 0, 0, 0)
fa40cc94 ???????? (f2000490, b6, fa3817a0, fa414050, 0, fa381730)
fa405da0 ???????? (f2000478, b6, fa3818b4, fa415444, 0, fa3817d8)
fa405c4c ???????? (f2000478, b6, fa381934, fa415444, d6658, fa381858)
fa405c4c ???????? (fa381938, 0, 0, fa38197c, 2f4210, fa3818d8)
fa400438 ???????? (fa3819c0, fa381c08, a, f60520b8, fa40bc8c, fa381b50)
fecfe2f8 ???????? (fa381c00, fa381a88, fa381b48, d6658, d6658, fa381a9c)
fed0ff90 ???????? (fefe4000, d6bb8, fa381b3c, fa381b38, fa381b48, d6658)
fed0fdf0 ???????? (fa381c00, fa381bfc, fa381bf0, fa381be8, fa381be0, d6658)
fed0fd78 ???????? (d6658, d6658, ac9e0, d6bb8, 2d4488, fed0fa60)
fed0fa88 ???????? (d6658, 0, 0, 0, 0, 0)
fecfcbd0 ???????? (d6658, ff1df688, 1, 1, ff1de000, 0)
ff1cb728 threadstart (d6658, 0, 0, 0, 0, 0) + 40
----------------- lwp# 8 / thread# 7 --------------------
ff11d194 _poll    (0, 0, 0, fa281a28, ff13f1b4, fa281a28) + 8
ff1cb134 select (0, a, 0, ff1de000, fa281e14, 0) + 34
fed32afc ???????? (d8040, 0, a, 0, 0, 0)
fed328b4 ???????? (d8040, 0, 0, 0, 0, 0)
fecfcbd0 ???????? (d8040, ff1df688, 1, 1, ff1de000, 0)
ff1cb728 threadstart (d8040, 0, 0, 0, 0, 0) + 40
----------------- lwp# 9 / thread# 8 --------------------
ff11efbc ___lwp_cond_wait (5f998, 5f980, 2e7aa0, ff1de000, fa181e14, 0) + 8
fecfc634 ???????? (5f950, 0, 0, 0, feffa26c, 0)
fed3371c ???????? (3c00, 3f44, 0, 0, 0, 0)
fecfcbd0 ???????? (d81a8, ff1df688, 1, 1, ff1de000, 0)
ff1cb728 threadstart (d81a8, 0, 0, 0, 0, 0) + 40
----------------- lwp# 10 / thread# 9 --------------------
ff11f008 lwpsema_wait (f1f81e30, ff1de000, 0, f1f81d70, ff3e2628, 0) + c
ff1b94c0 _swtch   (f1f81d70, ffffffff, ff1de000, 5, 1000, 0) + 158
ff1bcc64 sema_wait (ff020fe0, ff1e98e4, 5000, 10000, 534d, 1) + bc
fed345c8 ???????? (0, 6, b, a, 1, 0)
fed34254 ???????? (ff002ae4, ff00a5a0, ff00a5d4, dab90, 2d4488, fed0fa60)
fed0fa88 ???????? (da630, 0, 0, 0, 0, 0)
fecfcbd0 ???????? (da630, ff1df688, 1, 1, ff1de000, 0)
ff1cb728 threadstart (da630, 0, 0, 0, 0, 0) + 40
----------------- lwp# 11 / thread# 10 --------------------
ff11efbc ___lwp_cond_wait (604e8, 604d0, 2e7aa0, feffa26c, 106c40, 0) + 8
fecfc88c ???????? (604a0, 0, 0, dbbd0, feffa26c, 0)
fed349ac ???????? (db670, db670, dbfd0, dbbd0, 2d4488, fed0fa60)
fed0fa88 ???????? (db670, 0, 0, 0, 0, 0)
fecfcbd0 ???????? (db670, ff1df688, 1, 1, ff1de000, 0)
ff1cb728 threadstart (db670, 0, 0, 0, 0, 0) + 40
-------------------------- thread# 3 --------------------
ff1bddbc reapwait (ff1e29e0, 20520, 0, ff1de000, 0, 0) + 38
ff1bdb14 _reaper (ff1dee30, ff1e4740, ff1e29e0, ff1dee08, 1, fe400000) + 38
ff1cb728 threadstart (0, 0, 0, 0, 0, 0) + 40

This is an update to the original message -
I have tried both HotSpot & Server JVMs but still see the
same behavior. I'm using 1.4 .
I'd like to provide more information to those who can help
me. I have a feeling there might be something wrong in my
CC options. Thus you will find below what my CC statement
looks like for one of the files in my project & for the
linking of the final shared library. I also have
provided the output of ldd on my shared library libaicd.so
& for comparison the output of ldd on libjvm.so as that
might provide some usefull information just incase
something looks suspecious & might ring a bell.
/opt/SUNWspro.cc6/bin/CC -c -KPIC -g -DDEBUG=DEBUG -
D_DEBUG -mt -DSOLARIS -DSTD_STREAM -
I/vob1/qwsrc/fw/include -I.-I/vob4/source/idl -
I/vob4/source/mttoolkit -I/vob4/source/mttoolkit/tools -
I/vob4/source/integrations/siebel/aicd -
I/vob4/source/include -I/vob1/qwsrc/fw/include -
I/vob4/source/source -I/vob4/source/mttoolkit -
I/vob1/external/platform_neutral/siebel/scapi/include -
I/external/sparc/Sun/jdk/1.3.1/include -
I/external/sparc/Sun/jdk/1.3.1/include/solaris -
I/vob4/source/idl -I/vob4/source/mttoolkit -
I/vob4/source/mttoolkit/tools -
I/vob4/source/mttoolkit/vnet -
I/vob4/source/mttoolkit/bool -DUNIX -
D_USE_MTTServerToolkit -D_JAVA_ WIAcceptTimeOut.cpp -
o /space/users/janak/buildoutput/sparc/debug/obj/integratio s/siebel/aicd/WIAcceptTimeOut.o
/opt/SUNWspro.cc6/bin/CC -G -
o /space/users/janak/buildoutput/sparc/debug/lib/fw/libaicd.so
/space/us
ers/janak/buildoutput/sparc/debug/obj/integrations/siebel/ai
cd/AgentService.o /space/users/janak/buildoutput/sparc/debug
/obj/integrations/siebel/aicd/AgentServiceCmds.o /space/user
s/janak/buildoutput/sparc/debug/obj/integrations/siebel/aicd
/AgentServiceEvents.o /space/users/janak/buildoutput/sparc/d
ebug/obj/integrations/siebel/aicd/AgentServiceICAReq.o /spac
e/users/janak/buildoutput/sparc/debug/obj/integrations/siebe
l/aicd/AgentServiceICEvents.o /space/users/janak/buildoutput
/sparc/debug/obj/integrations/siebel/aicd/AgentServiceUtilit
ies.o /space/users/janak/buildoutput/sparc/debug/obj/integra
tions/siebel/aicd/AvMc.o /space/users/janak/buildoutput/spar
c/debug/obj/integrations/siebel/aicd/InternationalStrings.o
/space/users/janak/buildoutput/sparc/debug/obj/integrations/
siebel/aicd/JEvent.o /space/users/janak/buildoutput/sparc/de
bug/obj/integrations/siebel/aicd/JMultipleEvents.o /space/us
ers/janak/buildoutput/sparc/debug/obj/integrations/siebel/ai
cd/JNIObject.o /space/users/janak/buildoutput/sparc/debug/ob
j/integrations/siebel/aicd/JObject.o /space/users/janak/buil
doutput/sparc/debug/obj/integrations/siebel/aicd/JSemaphore.
o /space/users/janak/buildoutput/sparc/debug/obj/integration
s/siebel/aicd/JWorkerThread.o /space/users/janak/buildoutput
/sparc/debug/obj/integrations/siebel/aicd/MultipleEvents.o /
space/users/janak/buildoutput/sparc/debug/obj/integrations/s
iebel/aicd/Param.o /space/users/janak/buildoutput/sparc/debu
g/obj/integrations/siebel/aicd/ParamQueue.o /space/users/jan
ak/buildoutput/sparc/debug/obj/integrations/siebel/aicd/RefC
ount.o /space/users/janak/buildoutput/sparc/debug/obj/integr
ations/siebel/aicd/SiebelDriver.o /space/users/janak/buildou
tput/sparc/debug/obj/integrations/siebel/aicd/SiebelEvent.o
/space/users/janak/buildoutput/sparc/debug/obj/integrations/
siebel/aicd/SiebelWorkItem.o /space/users/janak/buildoutput/
sparc/debug/obj/integrations/siebel/aicd/SingleEvent.o /spac
e/users/janak/buildoutput/sparc/debug/obj/integrations/siebe
l/aicd/SmartPtr.o /space/users/janak/buildoutput/sparc/debug
/obj/integrations/siebel/aicd/StdAfx.o /space/users/janak/bu
ildoutput/sparc/debug/obj/integrations/siebel/aicd/ThreadPoo
l.o /space/users/janak/buildoutput/sparc/debug/obj/integrati
ons/siebel/aicd/Utilities.o /space/users/janak/buildoutput/s
parc/debug/obj/integrations/siebel/aicd/WIAcceptTimeOut.o -
lnsl -lc -lCstd -
L/space/users/janak/buildoutput/sparc/debug/lib/cti -
lmttoolkit -
L/space/users/janak/buildoutput/sparc/debug/lib/fw -
lmttlogger -
L/space/users/janak/buildoutput/sparc/debug/lib/fw -
lqwlicmtt -
L/external/sparc/Sun/jdk/1.3.1/jre/lib/sparc/server -
Bdynamic -ljvm -mt -lpthread -lposix4
$ ldd /usr/j2se/jre/lib/sparc/libjvm.so
libCrun.so.1 => /usr/lib/libCrun.so.1
libdl.so.1 => /usr/lib/libdl.so.1
libthread.so.1 => /usr/lib/libthread.so.1
libsocket.so.1 => /usr/lib/libsocket.so.1
libnsl.so.1 => /usr/lib/libnsl.so.1
libm.so.1 => /usr/lib/libm.so.1
libw.so.1 => /usr/lib/libw.so.1
libc.so.1 => /usr/lib/libc.so.1
libmp.so.2 => /usr/lib/libmp.so.2
/usr/platform/SUNW,Sun-Blade-1000/lib/libc_psr.so.1
$ ldd libaicd.so
libnsl.so.1 => /usr/lib/libnsl.so.1
libc.so.1 => /usr/lib/libc.so.1
libmttoolkit.so => ./libmttoolkit.so
libmttlogger.so => ./libmttlogger.so
libjvm.so => /usr/java/jre/lib/sparc/libjvm.so
libpthread.so.1 => /usr/lib/libpthread.so.1
librt.so.1 => /usr/lib/librt.so.1
libdl.so.1 => /usr/lib/libdl.so.1
libmp.so.2 => /usr/lib/libmp.so.2
libCrun.so.1 => /usr/lib/libCrun.so.1
libthread.so.1 => /usr/lib/libthread.so.1
libsocket.so.1 => /usr/lib/libsocket.so.1
libm.so.1 => /usr/lib/libm.so.1
libaio.so.1 => /usr/lib/libaio.so.1
libw.so.1 => /usr/lib/libw.so.1
/usr/platform/SUNW,Sun-Blade-1000/lib/libc_psr.so.1

Problem with IPSec on solaris 9

Hi all
I'm facing a problem with IPSec on solaris 9 that I didn't have with Solaris 8 (With the Security package installed).
I've an application that creates SA's by using the pf-key interface.
What it does is first doing a GETSPI to a specific SPI and a specific Destination IP Address.
This will create an SA and put it in a LARVAL state. After about a minute my application will do an UPDATE to this SPI and that command should change the state of the SA from LARVAL to MATURE but instead I get an error saying that this SPI & IP address already exist (errno = 17).
Well of course it's already exist that's the all point it should just change the state of an existing SA.
This exact scenarion was is working fine on Solaris 8.
Am I doing somthing wrong (maybe there is a package on the solaris 9 that I need to install ?)
or is this a bug in solaris 9.
If anyone has any idea on how to do that (without using a one step ADD for a new SA) I will be very thankfull.

Sorry for using reply for querying.
I got a problem in creating a Security Association using the PF_KEY Socket (first used SADB_GETSPI and got SPI,with SPI tried to update SADB_UPDATE).
Getting this problem on Sun Solaris 8.
It returns errno 122 . operation not supported.
Here is my mailId [email protected]
I got few more queries regarding PF_KEY socket.
Not much directions are available also for pf_key socket in internet.
Monitor produces the following error.
# ipseckey monitor
"Base message (version 2) type UPDATE, SA type AH.
Error Operation not supported on transport endpoint from PF_KEY.
Message length 16 bytes, seq=4294967294, pid=450."
Here is my mailId [email protected]
Thanks in Advance.
ssundar.

Problem with telnet on solaris 9

Hi all,
I have a problem with telnet on my sun fire v440 server with solaris 9 system, whenever I telnet to this server as a normal user ,after entering the username and password ,the user environment will switch to root. but i have checked the 'id' as i telnet the system ,it was not root. Pls refer the below message as i login the server:
SunOS 5.9
login: prad
Password:
Last login: Thu Apr 14 11:14:54 from 10.60.64.59
Sun Microsystems Inc.   SunOS 5.9       Generic May 2002
You have mail.
root@T-Server02 # id
uid=1017(prad) gid=10(staff)
root@T-Server02 # cat /etc/passwd | grep prad
prad:x:1017:10::/export/home/prad:/bin/sh
root@T-Server02 # ls -lrt profile*
-rwxrwxrwx   1 prad     other        174 Feb 7 2008 local.profile
-rw-r--r--   1 prad     other        144 Feb 7 2008 backupprofile
root@T-Server02 # pwd
*/export/home/prad*
root@T-Server02 #
Does any one have idea on how to solve this problem?

Thanks . I'm pretty new in SUN OS, and not quite get your point . Here is the local.profile showed as below:
This is a newly happened issue, I think we haven't change any profile setting in server:
SunOS 5.9
login: prad
Password:
Sun Microsystems Inc.   SunOS 5.9       Generic May 2002
You have mail.
root@T-Server02 # more local.profile
*# Copyright (c) 2001 by Sun Microsystems, Inc.*
*# All rights reserved.*
*# ident "@(#)local.profile 1.10 01/06/23 SMI"*
stty istrip
PATH=/usr/bin:/usr/ucb:/etc:.
export PATH
root@T-Server02 #

Problems with hp laserjet 4ml on solaris 7

Hi out there,
I`ve got a problem with a hp laserjet 4 ml on "solaris 7" (AXUS ultrasparc WSU1D/200):
After I had installed the driver with the hp jetadmin-tool, it`s only
possible to print as a root-user, as a normal user nothing happened, the printjob never reached the printer, but with the
lpq-command I can see it in the printqueue. With "solaris 2.6" it worked fine. Thanks a lot.

Hi,
Check out the permissions for printer related directories and files.
Regards,
Dharani
SlashSupport India Pvt Ltd.
Hi out there,
I`ve got a problem with a hp laserjet 4 ml on "solaris
7" (AXUS ultrasparc WSU1D/200):
After I had installed the driver with the hp
jetadmin-tool, it`s only
possible to print as a root-user, as a normal user
nothing happened, the printjob never reached the
printer, but with the
lpq-command I can see it in the printqueue. With
"solaris 2.6" it worked fine. Thanks a lot.

Video problems with solaris 10

Has any gotten solaris 10 working with an IBM Net Vista workstation? I am having problems with setting it up in desktop mode.

I have had problems with all versions of Solaris on anything but Sun hardware.
I hate MS but they do manage to get their OS to run on almost anything.
Maybe Sun never made it big because they chase away customers with products that don't work.
I would never sell a Sun product to any of my clients.
I only use it in the classroom because I have to.

Problem with perl Net::Telnet::Cisco for Solaris 10 SPARC

hi all,
I have problem with installing this modules : Net::Telnet::Cisco,TermReadKey-2.30.tar.gz.
I'm trying to install this packages Net-Telnet-Cisco-1.10.tar.gz, and the it notifies me that I need to install before the TermReadkey, I get it from www.CPAN.org -TermReadKey-2.30.tar.gz
and look what I have when I run : "make test" or even "make install"
cc -c -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -xarch=v8 -D_TS_ERRNO -xO3 -xspace -xildoff -DVERSION=\"2.30\" -DXS_VERSION=\"2.30\" -KPIC "-I/usr/perl5/5.8.4/lib/sun4-solaris-64int/CORE" ReadKey.c
sh: cc: not found
*** Error code 1
make: Fatal error: Command failed for target `ReadKey.o'
Please can some one help me. it 's very urgent
thank you in advance

Vipul_Ramani wrote:
only thing you are missing CC does not your current PATH
ADD it again
using export PATH=$PATH:/usr/ucb and try ... do it No, please don't. There is no compiler in /usr/ucb, and it is probably a very good idea to compile without /usr/ucb in your path. /usr/ucb/cc is only a wrapper to extend a very old SunOS compatibility environment onto an existing compiler.
If you don't have the current Sun compiler suite on your machine (go ahead and download it, it's free), then you can use gcc by invoking "perlgcc" instead of "perl" on the module's makefile.
Darren

Solaris 10 NFS caching problems with custom NFS server

I'm facing a very strange problem with a pure java standalone application providing NFS server v2 service. This same application, targeted for JVM 1.4.2 is running on different environment (see below) without any problem.
On Solaris 10 we try any kind of mount parameters, system services up/down configuration, but cannot solve the problem.
We're in big trouble 'cause the app is a mandatory component for a product to be in production stage in a while.
Details follows
System description
Sunsparc U4 with SunOS 5.10, patch level: Generic_118833-33, 64bit
List of active NFS services
disabled   svc:/network/nfs/cbd:default
disabled   svc:/network/nfs/mapid:default
disabled   svc:/network/nfs/client:default
disabled   svc:/network/nfs/server:default
disabled   svc:/network/nfs/rquota:default
online       svc:/network/nfs/status:default
online       svc:/network/nfs/nlockmgr:default
NFS mount params (from /etc/vfstab)
localhost:/VDD_Server - /users/vdd/mnt nfs - vers=2,proto=tcp,timeo=600,wsize=8192,rsize=8192,port=1579,noxattr,soft,intr,noac
Anomaly description
The server side of NFS is provided by a java standalone application enabled only for NFS v2 and tested on different environments like: MS Windows 2000, 2003, XP, Linux RedHat 10 32bit, Linux Debian 2.6.x 64bit, SunOS 5.9. The java application is distributed with a test program (java standalone application) to validate main installation and configuration.
The test program simply reads a file from the NFS file-system exported by our main application (called VDD) and writes the same file with a different name on the VDD exported file-system. At end of test, the written file have different contents from the read one. Indeep investigation shows following behaviuor:
_ The read phase behaves correctly on both server (VDD) and client (test app) sides, trasporting the file with correct contents.
_ The write phase produces a zero filled file for 90% of resulting VDD file-system file but ending correctly with the same sequence of bytes as the original read file.
_ Detailed write phase behaviour:
1_ Test app wites first 512 bytes => VDD receive NFS command with offset 0, count 512 and correct bytes contents;
2_ Test app writes next 512 bytes => VDD receive NFS command with offset 0, count 1024 and WRONG bytes contents: the first 512 bytes are zero filled (previous write) and last 512 bytes with correct bytes contents (current write).
3_ Test app writes next 512 bytes => VDD receive NFS command with offset 0, count 1536 and WRONG bytes contents: the first 1024 bytes are zero filled (previous writes) and last 512 bytes with correct bytes contents (current write).
4_ and so on...
Further tests
We tested our VDD application on the same Solaris 10 system but with our test application on another (Linux) machine, contacting VDD via Linux NFS client, and we don�t see the wrong behaviour: our test program performed ok and written file has same contents as read one.
Has anyone faced a similar problem?
We are Sun ISV partner: do you think we have enough info to open a bug request to SDN?
Any suggestions?
Many thanks in advance,
Maurizio.

I finally got it working. I think my problem was that I was coping and pasting the /etc/pam.conf from Gary's guide into the pam.conf file.
There was unseen carriage returns mucking things up. So following a combination of the two docs worked. Starting with:
http://web.singnet.com.sg/~garyttt/Configuring%20Solaris%20Native%20LDAP%20Client%20for%20Fedora%20Directory%20Server.htm
Then following the steps at "Authentication Option #1: LDAP PAM configuration " from this doc:
http://docs.lucidinteractive.ca/index.php/Solaris_LDAP_client_with_OpenLDAP_server
for the pam.conf, got things working.
Note: ensure that your user has the shadowAccount value set in the objectClass

X86 Solaris 10 problems with ipfilter

Similar Messages

Maybe you are looking for